From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/crypto/keembay/ocs-hcu.c | 840 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 840 insertions(+) create mode 100644 drivers/crypto/keembay/ocs-hcu.c (limited to 'drivers/crypto/keembay/ocs-hcu.c') diff --git a/drivers/crypto/keembay/ocs-hcu.c b/drivers/crypto/keembay/ocs-hcu.c new file mode 100644 index 000000000..deb9bd460 --- /dev/null +++ b/drivers/crypto/keembay/ocs-hcu.c @@ -0,0 +1,840 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Intel Keem Bay OCS HCU Crypto Driver. + * + * Copyright (C) 2018-2020 Intel Corporation + */ + +#include +#include +#include +#include +#include + +#include + +#include "ocs-hcu.h" + +/* Registers. */ +#define OCS_HCU_MODE 0x00 +#define OCS_HCU_CHAIN 0x04 +#define OCS_HCU_OPERATION 0x08 +#define OCS_HCU_KEY_0 0x0C +#define OCS_HCU_ISR 0x50 +#define OCS_HCU_IER 0x54 +#define OCS_HCU_STATUS 0x58 +#define OCS_HCU_MSG_LEN_LO 0x60 +#define OCS_HCU_MSG_LEN_HI 0x64 +#define OCS_HCU_KEY_BYTE_ORDER_CFG 0x80 +#define OCS_HCU_DMA_SRC_ADDR 0x400 +#define OCS_HCU_DMA_SRC_SIZE 0x408 +#define OCS_HCU_DMA_DST_SIZE 0x40C +#define OCS_HCU_DMA_DMA_MODE 0x410 +#define OCS_HCU_DMA_NEXT_SRC_DESCR 0x418 +#define OCS_HCU_DMA_MSI_ISR 0x480 +#define OCS_HCU_DMA_MSI_IER 0x484 +#define OCS_HCU_DMA_MSI_MASK 0x488 + +/* Register bit definitions. */ +#define HCU_MODE_ALGO_SHIFT 16 +#define HCU_MODE_HMAC_SHIFT 22 + +#define HCU_STATUS_BUSY BIT(0) + +#define HCU_BYTE_ORDER_SWAP BIT(0) + +#define HCU_IRQ_HASH_DONE BIT(2) +#define HCU_IRQ_HASH_ERR_MASK (BIT(3) | BIT(1) | BIT(0)) + +#define HCU_DMA_IRQ_SRC_DONE BIT(0) +#define HCU_DMA_IRQ_SAI_ERR BIT(2) +#define HCU_DMA_IRQ_BAD_COMP_ERR BIT(3) +#define HCU_DMA_IRQ_INBUF_RD_ERR BIT(4) +#define HCU_DMA_IRQ_INBUF_WD_ERR BIT(5) +#define HCU_DMA_IRQ_OUTBUF_WR_ERR BIT(6) +#define HCU_DMA_IRQ_OUTBUF_RD_ERR BIT(7) +#define HCU_DMA_IRQ_CRD_ERR BIT(8) +#define HCU_DMA_IRQ_ERR_MASK (HCU_DMA_IRQ_SAI_ERR | \ + HCU_DMA_IRQ_BAD_COMP_ERR | \ + HCU_DMA_IRQ_INBUF_RD_ERR | \ + HCU_DMA_IRQ_INBUF_WD_ERR | \ + HCU_DMA_IRQ_OUTBUF_WR_ERR | \ + HCU_DMA_IRQ_OUTBUF_RD_ERR | \ + HCU_DMA_IRQ_CRD_ERR) + +#define HCU_DMA_SNOOP_MASK (0x7 << 28) +#define HCU_DMA_SRC_LL_EN BIT(25) +#define HCU_DMA_EN BIT(31) + +#define OCS_HCU_ENDIANNESS_VALUE 0x2A + +#define HCU_DMA_MSI_UNMASK BIT(0) +#define HCU_DMA_MSI_DISABLE 0 +#define HCU_IRQ_DISABLE 0 + +#define OCS_HCU_START BIT(0) +#define OCS_HCU_TERMINATE BIT(1) + +#define OCS_LL_DMA_FLAG_TERMINATE BIT(31) + +#define OCS_HCU_HW_KEY_LEN_U32 (OCS_HCU_HW_KEY_LEN / sizeof(u32)) + +#define HCU_DATA_WRITE_ENDIANNESS_OFFSET 26 + +#define OCS_HCU_NUM_CHAINS_SHA256_224_SM3 (SHA256_DIGEST_SIZE / sizeof(u32)) +#define OCS_HCU_NUM_CHAINS_SHA384_512 (SHA512_DIGEST_SIZE / sizeof(u32)) + +/* + * While polling on a busy HCU, wait maximum 200us between one check and the + * other. + */ +#define OCS_HCU_WAIT_BUSY_RETRY_DELAY_US 200 +/* Wait on a busy HCU for maximum 1 second. */ +#define OCS_HCU_WAIT_BUSY_TIMEOUT_US 1000000 + +/** + * struct ocs_hcu_dma_entry - An entry in an OCS DMA linked list. + * @src_addr: Source address of the data. + * @src_len: Length of data to be fetched. + * @nxt_desc: Next descriptor to fetch. + * @ll_flags: Flags (Freeze @ terminate) for the DMA engine. + */ +struct ocs_hcu_dma_entry { + u32 src_addr; + u32 src_len; + u32 nxt_desc; + u32 ll_flags; +}; + +/** + * struct ocs_hcu_dma_list - OCS-specific DMA linked list. + * @head: The head of the list (points to the array backing the list). + * @tail: The current tail of the list; NULL if the list is empty. + * @dma_addr: The DMA address of @head (i.e., the DMA address of the backing + * array). + * @max_nents: Maximum number of entries in the list (i.e., number of elements + * in the backing array). + * + * The OCS DMA list is an array-backed list of OCS DMA descriptors. The array + * backing the list is allocated with dma_alloc_coherent() and pointed by + * @head. + */ +struct ocs_hcu_dma_list { + struct ocs_hcu_dma_entry *head; + struct ocs_hcu_dma_entry *tail; + dma_addr_t dma_addr; + size_t max_nents; +}; + +static inline u32 ocs_hcu_num_chains(enum ocs_hcu_algo algo) +{ + switch (algo) { + case OCS_HCU_ALGO_SHA224: + case OCS_HCU_ALGO_SHA256: + case OCS_HCU_ALGO_SM3: + return OCS_HCU_NUM_CHAINS_SHA256_224_SM3; + case OCS_HCU_ALGO_SHA384: + case OCS_HCU_ALGO_SHA512: + return OCS_HCU_NUM_CHAINS_SHA384_512; + default: + return 0; + }; +} + +static inline u32 ocs_hcu_digest_size(enum ocs_hcu_algo algo) +{ + switch (algo) { + case OCS_HCU_ALGO_SHA224: + return SHA224_DIGEST_SIZE; + case OCS_HCU_ALGO_SHA256: + case OCS_HCU_ALGO_SM3: + /* SM3 shares the same block size. */ + return SHA256_DIGEST_SIZE; + case OCS_HCU_ALGO_SHA384: + return SHA384_DIGEST_SIZE; + case OCS_HCU_ALGO_SHA512: + return SHA512_DIGEST_SIZE; + default: + return 0; + } +} + +/** + * ocs_hcu_wait_busy() - Wait for HCU OCS hardware to became usable. + * @hcu_dev: OCS HCU device to wait for. + * + * Return: 0 if device free, -ETIMEOUT if device busy and internal timeout has + * expired. + */ +static int ocs_hcu_wait_busy(struct ocs_hcu_dev *hcu_dev) +{ + long val; + + return readl_poll_timeout(hcu_dev->io_base + OCS_HCU_STATUS, val, + !(val & HCU_STATUS_BUSY), + OCS_HCU_WAIT_BUSY_RETRY_DELAY_US, + OCS_HCU_WAIT_BUSY_TIMEOUT_US); +} + +static void ocs_hcu_done_irq_en(struct ocs_hcu_dev *hcu_dev) +{ + /* Clear any pending interrupts. */ + writel(0xFFFFFFFF, hcu_dev->io_base + OCS_HCU_ISR); + hcu_dev->irq_err = false; + /* Enable error and HCU done interrupts. */ + writel(HCU_IRQ_HASH_DONE | HCU_IRQ_HASH_ERR_MASK, + hcu_dev->io_base + OCS_HCU_IER); +} + +static void ocs_hcu_dma_irq_en(struct ocs_hcu_dev *hcu_dev) +{ + /* Clear any pending interrupts. */ + writel(0xFFFFFFFF, hcu_dev->io_base + OCS_HCU_DMA_MSI_ISR); + hcu_dev->irq_err = false; + /* Only operating on DMA source completion and error interrupts. */ + writel(HCU_DMA_IRQ_ERR_MASK | HCU_DMA_IRQ_SRC_DONE, + hcu_dev->io_base + OCS_HCU_DMA_MSI_IER); + /* Unmask */ + writel(HCU_DMA_MSI_UNMASK, hcu_dev->io_base + OCS_HCU_DMA_MSI_MASK); +} + +static void ocs_hcu_irq_dis(struct ocs_hcu_dev *hcu_dev) +{ + writel(HCU_IRQ_DISABLE, hcu_dev->io_base + OCS_HCU_IER); + writel(HCU_DMA_MSI_DISABLE, hcu_dev->io_base + OCS_HCU_DMA_MSI_IER); +} + +static int ocs_hcu_wait_and_disable_irq(struct ocs_hcu_dev *hcu_dev) +{ + int rc; + + rc = wait_for_completion_interruptible(&hcu_dev->irq_done); + if (rc) + goto exit; + + if (hcu_dev->irq_err) { + /* Unset flag and return error. */ + hcu_dev->irq_err = false; + rc = -EIO; + goto exit; + } + +exit: + ocs_hcu_irq_dis(hcu_dev); + + return rc; +} + +/** + * ocs_hcu_get_intermediate_data() - Get intermediate data. + * @hcu_dev: The target HCU device. + * @data: Where to store the intermediate. + * @algo: The algorithm being used. + * + * This function is used to save the current hashing process state in order to + * continue it in the future. + * + * Note: once all data has been processed, the intermediate data actually + * contains the hashing result. So this function is also used to retrieve the + * final result of a hashing process. + * + * Return: 0 on success, negative error code otherwise. + */ +static int ocs_hcu_get_intermediate_data(struct ocs_hcu_dev *hcu_dev, + struct ocs_hcu_idata *data, + enum ocs_hcu_algo algo) +{ + const int n = ocs_hcu_num_chains(algo); + u32 *chain; + int rc; + int i; + + /* Data not requested. */ + if (!data) + return -EINVAL; + + chain = (u32 *)data->digest; + + /* Ensure that the OCS is no longer busy before reading the chains. */ + rc = ocs_hcu_wait_busy(hcu_dev); + if (rc) + return rc; + + /* + * This loops is safe because data->digest is an array of + * SHA512_DIGEST_SIZE bytes and the maximum value returned by + * ocs_hcu_num_chains() is OCS_HCU_NUM_CHAINS_SHA384_512 which is equal + * to SHA512_DIGEST_SIZE / sizeof(u32). + */ + for (i = 0; i < n; i++) + chain[i] = readl(hcu_dev->io_base + OCS_HCU_CHAIN); + + data->msg_len_lo = readl(hcu_dev->io_base + OCS_HCU_MSG_LEN_LO); + data->msg_len_hi = readl(hcu_dev->io_base + OCS_HCU_MSG_LEN_HI); + + return 0; +} + +/** + * ocs_hcu_set_intermediate_data() - Set intermediate data. + * @hcu_dev: The target HCU device. + * @data: The intermediate data to be set. + * @algo: The algorithm being used. + * + * This function is used to continue a previous hashing process. + */ +static void ocs_hcu_set_intermediate_data(struct ocs_hcu_dev *hcu_dev, + const struct ocs_hcu_idata *data, + enum ocs_hcu_algo algo) +{ + const int n = ocs_hcu_num_chains(algo); + u32 *chain = (u32 *)data->digest; + int i; + + /* + * This loops is safe because data->digest is an array of + * SHA512_DIGEST_SIZE bytes and the maximum value returned by + * ocs_hcu_num_chains() is OCS_HCU_NUM_CHAINS_SHA384_512 which is equal + * to SHA512_DIGEST_SIZE / sizeof(u32). + */ + for (i = 0; i < n; i++) + writel(chain[i], hcu_dev->io_base + OCS_HCU_CHAIN); + + writel(data->msg_len_lo, hcu_dev->io_base + OCS_HCU_MSG_LEN_LO); + writel(data->msg_len_hi, hcu_dev->io_base + OCS_HCU_MSG_LEN_HI); +} + +static int ocs_hcu_get_digest(struct ocs_hcu_dev *hcu_dev, + enum ocs_hcu_algo algo, u8 *dgst, size_t dgst_len) +{ + u32 *chain; + int rc; + int i; + + if (!dgst) + return -EINVAL; + + /* Length of the output buffer must match the algo digest size. */ + if (dgst_len != ocs_hcu_digest_size(algo)) + return -EINVAL; + + /* Ensure that the OCS is no longer busy before reading the chains. */ + rc = ocs_hcu_wait_busy(hcu_dev); + if (rc) + return rc; + + chain = (u32 *)dgst; + for (i = 0; i < dgst_len / sizeof(u32); i++) + chain[i] = readl(hcu_dev->io_base + OCS_HCU_CHAIN); + + return 0; +} + +/** + * ocs_hcu_hw_cfg() - Configure the HCU hardware. + * @hcu_dev: The HCU device to configure. + * @algo: The algorithm to be used by the HCU device. + * @use_hmac: Whether or not HW HMAC should be used. + * + * Return: 0 on success, negative error code otherwise. + */ +static int ocs_hcu_hw_cfg(struct ocs_hcu_dev *hcu_dev, enum ocs_hcu_algo algo, + bool use_hmac) +{ + u32 cfg; + int rc; + + if (algo != OCS_HCU_ALGO_SHA256 && algo != OCS_HCU_ALGO_SHA224 && + algo != OCS_HCU_ALGO_SHA384 && algo != OCS_HCU_ALGO_SHA512 && + algo != OCS_HCU_ALGO_SM3) + return -EINVAL; + + rc = ocs_hcu_wait_busy(hcu_dev); + if (rc) + return rc; + + /* Ensure interrupts are disabled. */ + ocs_hcu_irq_dis(hcu_dev); + + /* Configure endianness, hashing algorithm and HW HMAC (if needed) */ + cfg = OCS_HCU_ENDIANNESS_VALUE << HCU_DATA_WRITE_ENDIANNESS_OFFSET; + cfg |= algo << HCU_MODE_ALGO_SHIFT; + if (use_hmac) + cfg |= BIT(HCU_MODE_HMAC_SHIFT); + + writel(cfg, hcu_dev->io_base + OCS_HCU_MODE); + + return 0; +} + +/** + * ocs_hcu_clear_key() - Clear key stored in OCS HMAC KEY registers. + * @hcu_dev: The OCS HCU device whose key registers should be cleared. + */ +static void ocs_hcu_clear_key(struct ocs_hcu_dev *hcu_dev) +{ + int reg_off; + + /* Clear OCS_HCU_KEY_[0..15] */ + for (reg_off = 0; reg_off < OCS_HCU_HW_KEY_LEN; reg_off += sizeof(u32)) + writel(0, hcu_dev->io_base + OCS_HCU_KEY_0 + reg_off); +} + +/** + * ocs_hcu_write_key() - Write key to OCS HMAC KEY registers. + * @hcu_dev: The OCS HCU device the key should be written to. + * @key: The key to be written. + * @len: The size of the key to write. It must be OCS_HCU_HW_KEY_LEN. + * + * Return: 0 on success, negative error code otherwise. + */ +static int ocs_hcu_write_key(struct ocs_hcu_dev *hcu_dev, const u8 *key, size_t len) +{ + u32 key_u32[OCS_HCU_HW_KEY_LEN_U32]; + int i; + + if (len > OCS_HCU_HW_KEY_LEN) + return -EINVAL; + + /* Copy key into temporary u32 array. */ + memcpy(key_u32, key, len); + + /* + * Hardware requires all the bytes of the HW Key vector to be + * written. So pad with zero until we reach OCS_HCU_HW_KEY_LEN. + */ + memzero_explicit((u8 *)key_u32 + len, OCS_HCU_HW_KEY_LEN - len); + + /* + * OCS hardware expects the MSB of the key to be written at the highest + * address of the HCU Key vector; in other word, the key must be + * written in reverse order. + * + * Therefore, we first enable byte swapping for the HCU key vector; + * so that bytes of 32-bit word written to OCS_HCU_KEY_[0..15] will be + * swapped: + * 3 <---> 0, 2 <---> 1. + */ + writel(HCU_BYTE_ORDER_SWAP, + hcu_dev->io_base + OCS_HCU_KEY_BYTE_ORDER_CFG); + /* + * And then we write the 32-bit words composing the key starting from + * the end of the key. + */ + for (i = 0; i < OCS_HCU_HW_KEY_LEN_U32; i++) + writel(key_u32[OCS_HCU_HW_KEY_LEN_U32 - 1 - i], + hcu_dev->io_base + OCS_HCU_KEY_0 + (sizeof(u32) * i)); + + memzero_explicit(key_u32, OCS_HCU_HW_KEY_LEN); + + return 0; +} + +/** + * ocs_hcu_ll_dma_start() - Start OCS HCU hashing via DMA + * @hcu_dev: The OCS HCU device to use. + * @dma_list: The OCS DMA list mapping the data to hash. + * @finalize: Whether or not this is the last hashing operation and therefore + * the final hash should be compute even if data is not + * block-aligned. + * + * Return: 0 on success, negative error code otherwise. + */ +static int ocs_hcu_ll_dma_start(struct ocs_hcu_dev *hcu_dev, + const struct ocs_hcu_dma_list *dma_list, + bool finalize) +{ + u32 cfg = HCU_DMA_SNOOP_MASK | HCU_DMA_SRC_LL_EN | HCU_DMA_EN; + int rc; + + if (!dma_list) + return -EINVAL; + + /* + * For final requests we use HCU_DONE IRQ to be notified when all input + * data has been processed by the HCU; however, we cannot do so for + * non-final requests, because we don't get a HCU_DONE IRQ when we + * don't terminate the operation. + * + * Therefore, for non-final requests, we use the DMA IRQ, which + * triggers when DMA has finishing feeding all the input data to the + * HCU, but the HCU may still be processing it. This is fine, since we + * will wait for the HCU processing to be completed when we try to read + * intermediate results, in ocs_hcu_get_intermediate_data(). + */ + if (finalize) + ocs_hcu_done_irq_en(hcu_dev); + else + ocs_hcu_dma_irq_en(hcu_dev); + + reinit_completion(&hcu_dev->irq_done); + writel(dma_list->dma_addr, hcu_dev->io_base + OCS_HCU_DMA_NEXT_SRC_DESCR); + writel(0, hcu_dev->io_base + OCS_HCU_DMA_SRC_SIZE); + writel(0, hcu_dev->io_base + OCS_HCU_DMA_DST_SIZE); + + writel(OCS_HCU_START, hcu_dev->io_base + OCS_HCU_OPERATION); + + writel(cfg, hcu_dev->io_base + OCS_HCU_DMA_DMA_MODE); + + if (finalize) + writel(OCS_HCU_TERMINATE, hcu_dev->io_base + OCS_HCU_OPERATION); + + rc = ocs_hcu_wait_and_disable_irq(hcu_dev); + if (rc) + return rc; + + return 0; +} + +struct ocs_hcu_dma_list *ocs_hcu_dma_list_alloc(struct ocs_hcu_dev *hcu_dev, + int max_nents) +{ + struct ocs_hcu_dma_list *dma_list; + + dma_list = kmalloc(sizeof(*dma_list), GFP_KERNEL); + if (!dma_list) + return NULL; + + /* Total size of the DMA list to allocate. */ + dma_list->head = dma_alloc_coherent(hcu_dev->dev, + sizeof(*dma_list->head) * max_nents, + &dma_list->dma_addr, GFP_KERNEL); + if (!dma_list->head) { + kfree(dma_list); + return NULL; + } + dma_list->max_nents = max_nents; + dma_list->tail = NULL; + + return dma_list; +} + +void ocs_hcu_dma_list_free(struct ocs_hcu_dev *hcu_dev, + struct ocs_hcu_dma_list *dma_list) +{ + if (!dma_list) + return; + + dma_free_coherent(hcu_dev->dev, + sizeof(*dma_list->head) * dma_list->max_nents, + dma_list->head, dma_list->dma_addr); + + kfree(dma_list); +} + +/* Add a new DMA entry at the end of the OCS DMA list. */ +int ocs_hcu_dma_list_add_tail(struct ocs_hcu_dev *hcu_dev, + struct ocs_hcu_dma_list *dma_list, + dma_addr_t addr, u32 len) +{ + struct device *dev = hcu_dev->dev; + struct ocs_hcu_dma_entry *old_tail; + struct ocs_hcu_dma_entry *new_tail; + + if (!len) + return 0; + + if (!dma_list) + return -EINVAL; + + if (addr & ~OCS_HCU_DMA_BIT_MASK) { + dev_err(dev, + "Unexpected error: Invalid DMA address for OCS HCU\n"); + return -EINVAL; + } + + old_tail = dma_list->tail; + new_tail = old_tail ? old_tail + 1 : dma_list->head; + + /* Check if list is full. */ + if (new_tail - dma_list->head >= dma_list->max_nents) + return -ENOMEM; + + /* + * If there was an old tail (i.e., this is not the first element we are + * adding), un-terminate the old tail and make it point to the new one. + */ + if (old_tail) { + old_tail->ll_flags &= ~OCS_LL_DMA_FLAG_TERMINATE; + /* + * The old tail 'nxt_desc' must point to the DMA address of the + * new tail. + */ + old_tail->nxt_desc = dma_list->dma_addr + + sizeof(*dma_list->tail) * (new_tail - + dma_list->head); + } + + new_tail->src_addr = (u32)addr; + new_tail->src_len = (u32)len; + new_tail->ll_flags = OCS_LL_DMA_FLAG_TERMINATE; + new_tail->nxt_desc = 0; + + /* Update list tail with new tail. */ + dma_list->tail = new_tail; + + return 0; +} + +/** + * ocs_hcu_hash_init() - Initialize hash operation context. + * @ctx: The context to initialize. + * @algo: The hashing algorithm to use. + * + * Return: 0 on success, negative error code otherwise. + */ +int ocs_hcu_hash_init(struct ocs_hcu_hash_ctx *ctx, enum ocs_hcu_algo algo) +{ + if (!ctx) + return -EINVAL; + + ctx->algo = algo; + ctx->idata.msg_len_lo = 0; + ctx->idata.msg_len_hi = 0; + /* No need to set idata.digest to 0. */ + + return 0; +} + +/** + * ocs_hcu_hash_update() - Perform a hashing iteration. + * @hcu_dev: The OCS HCU device to use. + * @ctx: The OCS HCU hashing context. + * @dma_list: The OCS DMA list mapping the input data to process. + * + * Return: 0 on success; negative error code otherwise. + */ +int ocs_hcu_hash_update(struct ocs_hcu_dev *hcu_dev, + struct ocs_hcu_hash_ctx *ctx, + const struct ocs_hcu_dma_list *dma_list) +{ + int rc; + + if (!hcu_dev || !ctx) + return -EINVAL; + + /* Configure the hardware for the current request. */ + rc = ocs_hcu_hw_cfg(hcu_dev, ctx->algo, false); + if (rc) + return rc; + + /* If we already processed some data, idata needs to be set. */ + if (ctx->idata.msg_len_lo || ctx->idata.msg_len_hi) + ocs_hcu_set_intermediate_data(hcu_dev, &ctx->idata, ctx->algo); + + /* Start linked-list DMA hashing. */ + rc = ocs_hcu_ll_dma_start(hcu_dev, dma_list, false); + if (rc) + return rc; + + /* Update idata and return. */ + return ocs_hcu_get_intermediate_data(hcu_dev, &ctx->idata, ctx->algo); +} + +/** + * ocs_hcu_hash_finup() - Update and finalize hash computation. + * @hcu_dev: The OCS HCU device to use. + * @ctx: The OCS HCU hashing context. + * @dma_list: The OCS DMA list mapping the input data to process. + * @dgst: The buffer where to save the computed digest. + * @dgst_len: The length of @dgst. + * + * Return: 0 on success; negative error code otherwise. + */ +int ocs_hcu_hash_finup(struct ocs_hcu_dev *hcu_dev, + const struct ocs_hcu_hash_ctx *ctx, + const struct ocs_hcu_dma_list *dma_list, + u8 *dgst, size_t dgst_len) +{ + int rc; + + if (!hcu_dev || !ctx) + return -EINVAL; + + /* Configure the hardware for the current request. */ + rc = ocs_hcu_hw_cfg(hcu_dev, ctx->algo, false); + if (rc) + return rc; + + /* If we already processed some data, idata needs to be set. */ + if (ctx->idata.msg_len_lo || ctx->idata.msg_len_hi) + ocs_hcu_set_intermediate_data(hcu_dev, &ctx->idata, ctx->algo); + + /* Start linked-list DMA hashing. */ + rc = ocs_hcu_ll_dma_start(hcu_dev, dma_list, true); + if (rc) + return rc; + + /* Get digest and return. */ + return ocs_hcu_get_digest(hcu_dev, ctx->algo, dgst, dgst_len); +} + +/** + * ocs_hcu_hash_final() - Finalize hash computation. + * @hcu_dev: The OCS HCU device to use. + * @ctx: The OCS HCU hashing context. + * @dgst: The buffer where to save the computed digest. + * @dgst_len: The length of @dgst. + * + * Return: 0 on success; negative error code otherwise. + */ +int ocs_hcu_hash_final(struct ocs_hcu_dev *hcu_dev, + const struct ocs_hcu_hash_ctx *ctx, u8 *dgst, + size_t dgst_len) +{ + int rc; + + if (!hcu_dev || !ctx) + return -EINVAL; + + /* Configure the hardware for the current request. */ + rc = ocs_hcu_hw_cfg(hcu_dev, ctx->algo, false); + if (rc) + return rc; + + /* If we already processed some data, idata needs to be set. */ + if (ctx->idata.msg_len_lo || ctx->idata.msg_len_hi) + ocs_hcu_set_intermediate_data(hcu_dev, &ctx->idata, ctx->algo); + + /* + * Enable HCU interrupts, so that HCU_DONE will be triggered once the + * final hash is computed. + */ + ocs_hcu_done_irq_en(hcu_dev); + reinit_completion(&hcu_dev->irq_done); + writel(OCS_HCU_TERMINATE, hcu_dev->io_base + OCS_HCU_OPERATION); + + rc = ocs_hcu_wait_and_disable_irq(hcu_dev); + if (rc) + return rc; + + /* Get digest and return. */ + return ocs_hcu_get_digest(hcu_dev, ctx->algo, dgst, dgst_len); +} + +/** + * ocs_hcu_digest() - Compute hash digest. + * @hcu_dev: The OCS HCU device to use. + * @algo: The hash algorithm to use. + * @data: The input data to process. + * @data_len: The length of @data. + * @dgst: The buffer where to save the computed digest. + * @dgst_len: The length of @dgst. + * + * Return: 0 on success; negative error code otherwise. + */ +int ocs_hcu_digest(struct ocs_hcu_dev *hcu_dev, enum ocs_hcu_algo algo, + void *data, size_t data_len, u8 *dgst, size_t dgst_len) +{ + struct device *dev = hcu_dev->dev; + dma_addr_t dma_handle; + u32 reg; + int rc; + + /* Configure the hardware for the current request. */ + rc = ocs_hcu_hw_cfg(hcu_dev, algo, false); + if (rc) + return rc; + + dma_handle = dma_map_single(dev, data, data_len, DMA_TO_DEVICE); + if (dma_mapping_error(dev, dma_handle)) + return -EIO; + + reg = HCU_DMA_SNOOP_MASK | HCU_DMA_EN; + + ocs_hcu_done_irq_en(hcu_dev); + + reinit_completion(&hcu_dev->irq_done); + + writel(dma_handle, hcu_dev->io_base + OCS_HCU_DMA_SRC_ADDR); + writel(data_len, hcu_dev->io_base + OCS_HCU_DMA_SRC_SIZE); + writel(OCS_HCU_START, hcu_dev->io_base + OCS_HCU_OPERATION); + writel(reg, hcu_dev->io_base + OCS_HCU_DMA_DMA_MODE); + + writel(OCS_HCU_TERMINATE, hcu_dev->io_base + OCS_HCU_OPERATION); + + rc = ocs_hcu_wait_and_disable_irq(hcu_dev); + if (rc) + return rc; + + dma_unmap_single(dev, dma_handle, data_len, DMA_TO_DEVICE); + + return ocs_hcu_get_digest(hcu_dev, algo, dgst, dgst_len); +} + +/** + * ocs_hcu_hmac() - Compute HMAC. + * @hcu_dev: The OCS HCU device to use. + * @algo: The hash algorithm to use with HMAC. + * @key: The key to use. + * @dma_list: The OCS DMA list mapping the input data to process. + * @key_len: The length of @key. + * @dgst: The buffer where to save the computed HMAC. + * @dgst_len: The length of @dgst. + * + * Return: 0 on success; negative error code otherwise. + */ +int ocs_hcu_hmac(struct ocs_hcu_dev *hcu_dev, enum ocs_hcu_algo algo, + const u8 *key, size_t key_len, + const struct ocs_hcu_dma_list *dma_list, + u8 *dgst, size_t dgst_len) +{ + int rc; + + /* Ensure 'key' is not NULL. */ + if (!key || key_len == 0) + return -EINVAL; + + /* Configure the hardware for the current request. */ + rc = ocs_hcu_hw_cfg(hcu_dev, algo, true); + if (rc) + return rc; + + rc = ocs_hcu_write_key(hcu_dev, key, key_len); + if (rc) + return rc; + + rc = ocs_hcu_ll_dma_start(hcu_dev, dma_list, true); + + /* Clear HW key before processing return code. */ + ocs_hcu_clear_key(hcu_dev); + + if (rc) + return rc; + + return ocs_hcu_get_digest(hcu_dev, algo, dgst, dgst_len); +} + +irqreturn_t ocs_hcu_irq_handler(int irq, void *dev_id) +{ + struct ocs_hcu_dev *hcu_dev = dev_id; + u32 hcu_irq; + u32 dma_irq; + + /* Read and clear the HCU interrupt. */ + hcu_irq = readl(hcu_dev->io_base + OCS_HCU_ISR); + writel(hcu_irq, hcu_dev->io_base + OCS_HCU_ISR); + + /* Read and clear the HCU DMA interrupt. */ + dma_irq = readl(hcu_dev->io_base + OCS_HCU_DMA_MSI_ISR); + writel(dma_irq, hcu_dev->io_base + OCS_HCU_DMA_MSI_ISR); + + /* Check for errors. */ + if (hcu_irq & HCU_IRQ_HASH_ERR_MASK || dma_irq & HCU_DMA_IRQ_ERR_MASK) { + hcu_dev->irq_err = true; + goto complete; + } + + /* Check for DONE IRQs. */ + if (hcu_irq & HCU_IRQ_HASH_DONE || dma_irq & HCU_DMA_IRQ_SRC_DONE) + goto complete; + + return IRQ_NONE; + +complete: + complete(&hcu_dev->irq_done); + + return IRQ_HANDLED; +} + +MODULE_LICENSE("GPL"); -- cgit v1.2.3