From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/cxl/mem.c | 168 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 168 insertions(+) create mode 100644 drivers/cxl/mem.c (limited to 'drivers/cxl/mem.c') diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c new file mode 100644 index 000000000..80263d12a --- /dev/null +++ b/drivers/cxl/mem.c @@ -0,0 +1,168 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright(c) 2022 Intel Corporation. All rights reserved. */ +#include +#include +#include +#include + +#include "cxlmem.h" +#include "cxlpci.h" + +/** + * DOC: cxl mem + * + * CXL memory endpoint devices and switches are CXL capable devices that are + * participating in CXL.mem protocol. Their functionality builds on top of the + * CXL.io protocol that allows enumerating and configuring components via + * standard PCI mechanisms. + * + * The cxl_mem driver owns kicking off the enumeration of this CXL.mem + * capability. With the detection of a CXL capable endpoint, the driver will + * walk up to find the platform specific port it is connected to, and determine + * if there are intervening switches in the path. If there are switches, a + * secondary action is to enumerate those (implemented in cxl_core). Finally the + * cxl_mem driver adds the device it is bound to as a CXL endpoint-port for use + * in higher level operations. + */ + +static void enable_suspend(void *data) +{ + cxl_mem_active_dec(); +} + +static void remove_debugfs(void *dentry) +{ + debugfs_remove_recursive(dentry); +} + +static int cxl_mem_dpa_show(struct seq_file *file, void *data) +{ + struct device *dev = file->private; + struct cxl_memdev *cxlmd = to_cxl_memdev(dev); + + cxl_dpa_debug(file, cxlmd->cxlds); + + return 0; +} + +static int devm_cxl_add_endpoint(struct cxl_memdev *cxlmd, + struct cxl_dport *parent_dport) +{ + struct cxl_port *parent_port = parent_dport->port; + struct cxl_dev_state *cxlds = cxlmd->cxlds; + struct cxl_port *endpoint, *iter, *down; + int rc; + + /* + * Now that the path to the root is established record all the + * intervening ports in the chain. + */ + for (iter = parent_port, down = NULL; !is_cxl_root(iter); + down = iter, iter = to_cxl_port(iter->dev.parent)) { + struct cxl_ep *ep; + + ep = cxl_ep_load(iter, cxlmd); + ep->next = down; + } + + endpoint = devm_cxl_add_port(&parent_port->dev, &cxlmd->dev, + cxlds->component_reg_phys, parent_dport); + if (IS_ERR(endpoint)) + return PTR_ERR(endpoint); + + rc = cxl_endpoint_autoremove(cxlmd, endpoint); + if (rc) + return rc; + + if (!endpoint->dev.driver) { + dev_err(&cxlmd->dev, "%s failed probe\n", + dev_name(&endpoint->dev)); + return -ENXIO; + } + + return 0; +} + +static int cxl_mem_probe(struct device *dev) +{ + struct cxl_memdev *cxlmd = to_cxl_memdev(dev); + struct cxl_port *parent_port; + struct cxl_dport *dport; + struct dentry *dentry; + int rc; + + /* + * Someone is trying to reattach this device after it lost its port + * connection (an endpoint port previously registered by this memdev was + * disabled). This racy check is ok because if the port is still gone, + * no harm done, and if the port hierarchy comes back it will re-trigger + * this probe. Port rescan and memdev detach work share the same + * single-threaded workqueue. + */ + if (work_pending(&cxlmd->detach_work)) + return -EBUSY; + + dentry = cxl_debugfs_create_dir(dev_name(dev)); + debugfs_create_devm_seqfile(dev, "dpamem", dentry, cxl_mem_dpa_show); + rc = devm_add_action_or_reset(dev, remove_debugfs, dentry); + if (rc) + return rc; + + rc = devm_cxl_enumerate_ports(cxlmd); + if (rc) + return rc; + + parent_port = cxl_mem_find_port(cxlmd, &dport); + if (!parent_port) { + dev_err(dev, "CXL port topology not found\n"); + return -ENXIO; + } + + device_lock(&parent_port->dev); + if (!parent_port->dev.driver) { + dev_err(dev, "CXL port topology %s not enabled\n", + dev_name(&parent_port->dev)); + rc = -ENXIO; + goto unlock; + } + + rc = devm_cxl_add_endpoint(cxlmd, dport); +unlock: + device_unlock(&parent_port->dev); + put_device(&parent_port->dev); + if (rc) + return rc; + + /* + * The kernel may be operating out of CXL memory on this device, + * there is no spec defined way to determine whether this device + * preserves contents over suspend, and there is no simple way + * to arrange for the suspend image to avoid CXL memory which + * would setup a circular dependency between PCI resume and save + * state restoration. + * + * TODO: support suspend when all the regions this device is + * hosting are locked and covered by the system address map, + * i.e. platform firmware owns restoring the HDM configuration + * that it locked. + */ + cxl_mem_active_inc(); + return devm_add_action_or_reset(dev, enable_suspend, NULL); +} + +static struct cxl_driver cxl_mem_driver = { + .name = "cxl_mem", + .probe = cxl_mem_probe, + .id = CXL_DEVICE_MEMORY_EXPANDER, +}; + +module_cxl_driver(cxl_mem_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(CXL); +MODULE_ALIAS_CXL(CXL_DEVICE_MEMORY_EXPANDER); +/* + * create_endpoint() wants to validate port driver attach immediately after + * endpoint registration. + */ +MODULE_SOFTDEP("pre: cxl_port"); -- cgit v1.2.3