From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/extcon/extcon-intel-cht-wc.c | 646 +++++++++++++++++++++++++++++++++++ 1 file changed, 646 insertions(+) create mode 100644 drivers/extcon/extcon-intel-cht-wc.c (limited to 'drivers/extcon/extcon-intel-cht-wc.c') diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c new file mode 100644 index 000000000..89a6449e3 --- /dev/null +++ b/drivers/extcon/extcon-intel-cht-wc.c @@ -0,0 +1,646 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Extcon charger detection driver for Intel Cherrytrail Whiskey Cove PMIC + * Copyright (C) 2017 Hans de Goede + * + * Based on various non upstream patches to support the CHT Whiskey Cove PMIC: + * Copyright (C) 2013-2015 Intel Corporation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "extcon-intel.h" + +#define CHT_WC_PHYCTRL 0x5e07 + +#define CHT_WC_CHGRCTRL0 0x5e16 +#define CHT_WC_CHGRCTRL0_CHGRRESET BIT(0) +#define CHT_WC_CHGRCTRL0_EMRGCHREN BIT(1) +#define CHT_WC_CHGRCTRL0_EXTCHRDIS BIT(2) +#define CHT_WC_CHGRCTRL0_SWCONTROL BIT(3) +#define CHT_WC_CHGRCTRL0_TTLCK BIT(4) +#define CHT_WC_CHGRCTRL0_CCSM_OFF BIT(5) +#define CHT_WC_CHGRCTRL0_DBPOFF BIT(6) +#define CHT_WC_CHGRCTRL0_CHR_WDT_NOKICK BIT(7) + +#define CHT_WC_CHGRCTRL1 0x5e17 +#define CHT_WC_CHGRCTRL1_FUSB_INLMT_100 BIT(0) +#define CHT_WC_CHGRCTRL1_FUSB_INLMT_150 BIT(1) +#define CHT_WC_CHGRCTRL1_FUSB_INLMT_500 BIT(2) +#define CHT_WC_CHGRCTRL1_FUSB_INLMT_900 BIT(3) +#define CHT_WC_CHGRCTRL1_FUSB_INLMT_1500 BIT(4) +#define CHT_WC_CHGRCTRL1_FTEMP_EVENT BIT(5) +#define CHT_WC_CHGRCTRL1_OTGMODE BIT(6) +#define CHT_WC_CHGRCTRL1_DBPEN BIT(7) + +#define CHT_WC_USBSRC 0x5e29 +#define CHT_WC_USBSRC_STS_MASK GENMASK(1, 0) +#define CHT_WC_USBSRC_STS_SUCCESS 2 +#define CHT_WC_USBSRC_STS_FAIL 3 +#define CHT_WC_USBSRC_TYPE_SHIFT 2 +#define CHT_WC_USBSRC_TYPE_MASK GENMASK(5, 2) +#define CHT_WC_USBSRC_TYPE_NONE 0 +#define CHT_WC_USBSRC_TYPE_SDP 1 +#define CHT_WC_USBSRC_TYPE_DCP 2 +#define CHT_WC_USBSRC_TYPE_CDP 3 +#define CHT_WC_USBSRC_TYPE_ACA 4 +#define CHT_WC_USBSRC_TYPE_SE1 5 +#define CHT_WC_USBSRC_TYPE_MHL 6 +#define CHT_WC_USBSRC_TYPE_FLOATING 7 +#define CHT_WC_USBSRC_TYPE_OTHER 8 +#define CHT_WC_USBSRC_TYPE_DCP_EXTPHY 9 + +#define CHT_WC_CHGDISCTRL 0x5e2f +#define CHT_WC_CHGDISCTRL_OUT BIT(0) +/* 0 - open drain, 1 - regular push-pull output */ +#define CHT_WC_CHGDISCTRL_DRV BIT(4) +/* 0 - pin is controlled by SW, 1 - by HW */ +#define CHT_WC_CHGDISCTRL_FN BIT(6) + +#define CHT_WC_PWRSRC_IRQ 0x6e03 +#define CHT_WC_PWRSRC_IRQ_MASK 0x6e0f +#define CHT_WC_PWRSRC_STS 0x6e1e +#define CHT_WC_PWRSRC_VBUS BIT(0) +#define CHT_WC_PWRSRC_DC BIT(1) +#define CHT_WC_PWRSRC_BATT BIT(2) +#define CHT_WC_PWRSRC_USBID_MASK GENMASK(4, 3) +#define CHT_WC_PWRSRC_USBID_SHIFT 3 +#define CHT_WC_PWRSRC_RID_ACA 0 +#define CHT_WC_PWRSRC_RID_GND 1 +#define CHT_WC_PWRSRC_RID_FLOAT 2 + +#define CHT_WC_VBUS_GPIO_CTLO 0x6e2d +#define CHT_WC_VBUS_GPIO_CTLO_OUTPUT BIT(0) +#define CHT_WC_VBUS_GPIO_CTLO_DRV_OD BIT(4) +#define CHT_WC_VBUS_GPIO_CTLO_DIR_OUT BIT(5) + +enum cht_wc_mux_select { + MUX_SEL_PMIC = 0, + MUX_SEL_SOC, +}; + +static const unsigned int cht_wc_extcon_cables[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_CHG_USB_SDP, + EXTCON_CHG_USB_CDP, + EXTCON_CHG_USB_DCP, + EXTCON_CHG_USB_ACA, + EXTCON_NONE, +}; + +struct cht_wc_extcon_data { + struct device *dev; + struct regmap *regmap; + struct extcon_dev *edev; + struct usb_role_switch *role_sw; + struct regulator *vbus_boost; + struct power_supply *psy; + enum power_supply_usb_type usb_type; + unsigned int previous_cable; + bool usb_host; + bool vbus_boost_enabled; +}; + +static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts) +{ + switch ((pwrsrc_sts & CHT_WC_PWRSRC_USBID_MASK) >> CHT_WC_PWRSRC_USBID_SHIFT) { + case CHT_WC_PWRSRC_RID_GND: + return INTEL_USB_ID_GND; + case CHT_WC_PWRSRC_RID_FLOAT: + return INTEL_USB_ID_FLOAT; + /* + * According to the spec. we should read the USB-ID pin ADC value here + * to determine the resistance of the used pull-down resister and then + * return RID_A / RID_B / RID_C based on this. But all "Accessory + * Charger Adapter"s (ACAs) which users can actually buy always use + * a combination of a charging port with one or more USB-A ports, so + * they should always use a resistor indicating RID_A. But the spec + * is hard to read / badly-worded so some of them actually indicate + * they are a RID_B ACA evnen though they clearly are a RID_A ACA. + * To workaround this simply always return INTEL_USB_RID_A, which + * matches all the ACAs which users can actually buy. + */ + case CHT_WC_PWRSRC_RID_ACA: + return INTEL_USB_RID_A; + default: + return INTEL_USB_ID_FLOAT; + } +} + +static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext, + bool ignore_errors) +{ + int ret, usbsrc, status; + unsigned long timeout; + + /* Charger detection can take upto 600ms, wait 800ms max. */ + timeout = jiffies + msecs_to_jiffies(800); + do { + ret = regmap_read(ext->regmap, CHT_WC_USBSRC, &usbsrc); + if (ret) { + dev_err(ext->dev, "Error reading usbsrc: %d\n", ret); + return ret; + } + + status = usbsrc & CHT_WC_USBSRC_STS_MASK; + if (status == CHT_WC_USBSRC_STS_SUCCESS || + status == CHT_WC_USBSRC_STS_FAIL) + break; + + msleep(50); /* Wait a bit before retrying */ + } while (time_before(jiffies, timeout)); + + if (status != CHT_WC_USBSRC_STS_SUCCESS) { + if (!ignore_errors) { + if (status == CHT_WC_USBSRC_STS_FAIL) + dev_warn(ext->dev, "Could not detect charger type\n"); + else + dev_warn(ext->dev, "Timeout detecting charger type\n"); + } + + /* Safe fallback */ + usbsrc = CHT_WC_USBSRC_TYPE_SDP << CHT_WC_USBSRC_TYPE_SHIFT; + } + + usbsrc = (usbsrc & CHT_WC_USBSRC_TYPE_MASK) >> CHT_WC_USBSRC_TYPE_SHIFT; + switch (usbsrc) { + default: + dev_warn(ext->dev, + "Unhandled charger type %d, defaulting to SDP\n", + ret); + ext->usb_type = POWER_SUPPLY_USB_TYPE_SDP; + return EXTCON_CHG_USB_SDP; + case CHT_WC_USBSRC_TYPE_SDP: + case CHT_WC_USBSRC_TYPE_FLOATING: + case CHT_WC_USBSRC_TYPE_OTHER: + ext->usb_type = POWER_SUPPLY_USB_TYPE_SDP; + return EXTCON_CHG_USB_SDP; + case CHT_WC_USBSRC_TYPE_CDP: + ext->usb_type = POWER_SUPPLY_USB_TYPE_CDP; + return EXTCON_CHG_USB_CDP; + case CHT_WC_USBSRC_TYPE_DCP: + case CHT_WC_USBSRC_TYPE_DCP_EXTPHY: + case CHT_WC_USBSRC_TYPE_MHL: /* MHL2+ delivers upto 2A, treat as DCP */ + ext->usb_type = POWER_SUPPLY_USB_TYPE_DCP; + return EXTCON_CHG_USB_DCP; + case CHT_WC_USBSRC_TYPE_ACA: + ext->usb_type = POWER_SUPPLY_USB_TYPE_ACA; + return EXTCON_CHG_USB_ACA; + } +} + +static void cht_wc_extcon_set_phymux(struct cht_wc_extcon_data *ext, u8 state) +{ + int ret; + + ret = regmap_write(ext->regmap, CHT_WC_PHYCTRL, state); + if (ret) + dev_err(ext->dev, "Error writing phyctrl: %d\n", ret); +} + +static void cht_wc_extcon_set_5v_boost(struct cht_wc_extcon_data *ext, + bool enable) +{ + int ret, val; + + /* + * The 5V boost converter is enabled through a gpio on the PMIC, since + * there currently is no gpio driver we access the gpio reg directly. + */ + val = CHT_WC_VBUS_GPIO_CTLO_DRV_OD | CHT_WC_VBUS_GPIO_CTLO_DIR_OUT; + if (enable) + val |= CHT_WC_VBUS_GPIO_CTLO_OUTPUT; + + ret = regmap_write(ext->regmap, CHT_WC_VBUS_GPIO_CTLO, val); + if (ret) + dev_err(ext->dev, "Error writing Vbus GPIO CTLO: %d\n", ret); +} + +static void cht_wc_extcon_set_otgmode(struct cht_wc_extcon_data *ext, + bool enable) +{ + unsigned int val = enable ? CHT_WC_CHGRCTRL1_OTGMODE : 0; + int ret; + + ret = regmap_update_bits(ext->regmap, CHT_WC_CHGRCTRL1, + CHT_WC_CHGRCTRL1_OTGMODE, val); + if (ret) + dev_err(ext->dev, "Error updating CHGRCTRL1 reg: %d\n", ret); + + if (ext->vbus_boost && ext->vbus_boost_enabled != enable) { + if (enable) + ret = regulator_enable(ext->vbus_boost); + else + ret = regulator_disable(ext->vbus_boost); + + if (ret) + dev_err(ext->dev, "Error updating Vbus boost regulator: %d\n", ret); + else + ext->vbus_boost_enabled = enable; + } +} + +static void cht_wc_extcon_enable_charging(struct cht_wc_extcon_data *ext, + bool enable) +{ + unsigned int val = enable ? 0 : CHT_WC_CHGDISCTRL_OUT; + int ret; + + ret = regmap_update_bits(ext->regmap, CHT_WC_CHGDISCTRL, + CHT_WC_CHGDISCTRL_OUT, val); + if (ret) + dev_err(ext->dev, "Error updating CHGDISCTRL reg: %d\n", ret); +} + +/* Small helper to sync EXTCON_CHG_USB_SDP and EXTCON_USB state */ +static void cht_wc_extcon_set_state(struct cht_wc_extcon_data *ext, + unsigned int cable, bool state) +{ + extcon_set_state_sync(ext->edev, cable, state); + if (cable == EXTCON_CHG_USB_SDP) + extcon_set_state_sync(ext->edev, EXTCON_USB, state); +} + +static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext) +{ + int ret, pwrsrc_sts, id; + unsigned int cable = EXTCON_NONE; + /* Ignore errors in host mode, as the 5v boost converter is on then */ + bool ignore_get_charger_errors = ext->usb_host; + enum usb_role role; + + ext->usb_type = POWER_SUPPLY_USB_TYPE_UNKNOWN; + + ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_STS, &pwrsrc_sts); + if (ret) { + dev_err(ext->dev, "Error reading pwrsrc status: %d\n", ret); + return; + } + + id = cht_wc_extcon_get_id(ext, pwrsrc_sts); + if (id == INTEL_USB_ID_GND) { + cht_wc_extcon_enable_charging(ext, false); + cht_wc_extcon_set_otgmode(ext, true); + + /* The 5v boost causes a false VBUS / SDP detect, skip */ + goto charger_det_done; + } + + cht_wc_extcon_set_otgmode(ext, false); + cht_wc_extcon_enable_charging(ext, true); + + /* Plugged into a host/charger or not connected? */ + if (!(pwrsrc_sts & CHT_WC_PWRSRC_VBUS)) { + /* Route D+ and D- to PMIC for future charger detection */ + cht_wc_extcon_set_phymux(ext, MUX_SEL_PMIC); + goto set_state; + } + + ret = cht_wc_extcon_get_charger(ext, ignore_get_charger_errors); + if (ret >= 0) + cable = ret; + +charger_det_done: + /* Route D+ and D- to SoC for the host or gadget controller */ + cht_wc_extcon_set_phymux(ext, MUX_SEL_SOC); + +set_state: + if (cable != ext->previous_cable) { + cht_wc_extcon_set_state(ext, cable, true); + cht_wc_extcon_set_state(ext, ext->previous_cable, false); + ext->previous_cable = cable; + } + + ext->usb_host = ((id == INTEL_USB_ID_GND) || (id == INTEL_USB_RID_A)); + extcon_set_state_sync(ext->edev, EXTCON_USB_HOST, ext->usb_host); + + if (ext->usb_host) + role = USB_ROLE_HOST; + else if (pwrsrc_sts & CHT_WC_PWRSRC_VBUS) + role = USB_ROLE_DEVICE; + else + role = USB_ROLE_NONE; + + /* Note: this is a no-op when ext->role_sw is NULL */ + ret = usb_role_switch_set_role(ext->role_sw, role); + if (ret) + dev_err(ext->dev, "Error setting USB-role: %d\n", ret); + + if (ext->psy) + power_supply_changed(ext->psy); +} + +static irqreturn_t cht_wc_extcon_isr(int irq, void *data) +{ + struct cht_wc_extcon_data *ext = data; + int ret, irqs; + + ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_IRQ, &irqs); + if (ret) { + dev_err(ext->dev, "Error reading irqs: %d\n", ret); + return IRQ_NONE; + } + + cht_wc_extcon_pwrsrc_event(ext); + + ret = regmap_write(ext->regmap, CHT_WC_PWRSRC_IRQ, irqs); + if (ret) { + dev_err(ext->dev, "Error writing irqs: %d\n", ret); + return IRQ_NONE; + } + + return IRQ_HANDLED; +} + +static int cht_wc_extcon_sw_control(struct cht_wc_extcon_data *ext, bool enable) +{ + int ret, mask, val; + + val = enable ? 0 : CHT_WC_CHGDISCTRL_FN; + ret = regmap_update_bits(ext->regmap, CHT_WC_CHGDISCTRL, + CHT_WC_CHGDISCTRL_FN, val); + if (ret) + dev_err(ext->dev, + "Error setting sw control for CHGDIS pin: %d\n", + ret); + + mask = CHT_WC_CHGRCTRL0_SWCONTROL | CHT_WC_CHGRCTRL0_CCSM_OFF; + val = enable ? mask : 0; + ret = regmap_update_bits(ext->regmap, CHT_WC_CHGRCTRL0, mask, val); + if (ret) + dev_err(ext->dev, "Error setting sw control: %d\n", ret); + + return ret; +} + +static int cht_wc_extcon_find_role_sw(struct cht_wc_extcon_data *ext) +{ + const struct software_node *swnode; + struct fwnode_handle *fwnode; + + swnode = software_node_find_by_name(NULL, "intel-xhci-usb-sw"); + if (!swnode) + return -EPROBE_DEFER; + + fwnode = software_node_fwnode(swnode); + ext->role_sw = usb_role_switch_find_by_fwnode(fwnode); + fwnode_handle_put(fwnode); + + return ext->role_sw ? 0 : -EPROBE_DEFER; +} + +static void cht_wc_extcon_put_role_sw(void *data) +{ + struct cht_wc_extcon_data *ext = data; + + usb_role_switch_put(ext->role_sw); +} + +/* Some boards require controlling the role-sw and Vbus based on the id-pin */ +static int cht_wc_extcon_get_role_sw_and_regulator(struct cht_wc_extcon_data *ext) +{ + int ret; + + ret = cht_wc_extcon_find_role_sw(ext); + if (ret) + return ret; + + ret = devm_add_action_or_reset(ext->dev, cht_wc_extcon_put_role_sw, ext); + if (ret) + return ret; + + /* + * On x86/ACPI platforms the regulator <-> consumer link is provided + * by platform_data passed to the regulator driver. This means that + * this info is not available before the regulator driver has bound. + * Use devm_regulator_get_optional() to avoid getting a dummy + * regulator and wait for the regulator to show up if necessary. + */ + ext->vbus_boost = devm_regulator_get_optional(ext->dev, "vbus"); + if (IS_ERR(ext->vbus_boost)) { + ret = PTR_ERR(ext->vbus_boost); + if (ret == -ENODEV) + ret = -EPROBE_DEFER; + + return dev_err_probe(ext->dev, ret, "getting Vbus regulator"); + } + + return 0; +} + +static int cht_wc_extcon_psy_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct cht_wc_extcon_data *ext = power_supply_get_drvdata(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_USB_TYPE: + val->intval = ext->usb_type; + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = ext->usb_type ? 1 : 0; + break; + default: + return -EINVAL; + } + + return 0; +} + +static const enum power_supply_usb_type cht_wc_extcon_psy_usb_types[] = { + POWER_SUPPLY_USB_TYPE_SDP, + POWER_SUPPLY_USB_TYPE_CDP, + POWER_SUPPLY_USB_TYPE_DCP, + POWER_SUPPLY_USB_TYPE_ACA, + POWER_SUPPLY_USB_TYPE_UNKNOWN, +}; + +static const enum power_supply_property cht_wc_extcon_psy_props[] = { + POWER_SUPPLY_PROP_USB_TYPE, + POWER_SUPPLY_PROP_ONLINE, +}; + +static const struct power_supply_desc cht_wc_extcon_psy_desc = { + .name = "cht_wcove_pwrsrc", + .type = POWER_SUPPLY_TYPE_USB, + .usb_types = cht_wc_extcon_psy_usb_types, + .num_usb_types = ARRAY_SIZE(cht_wc_extcon_psy_usb_types), + .properties = cht_wc_extcon_psy_props, + .num_properties = ARRAY_SIZE(cht_wc_extcon_psy_props), + .get_property = cht_wc_extcon_psy_get_prop, +}; + +static int cht_wc_extcon_register_psy(struct cht_wc_extcon_data *ext) +{ + struct power_supply_config psy_cfg = { .drv_data = ext }; + + ext->psy = devm_power_supply_register(ext->dev, + &cht_wc_extcon_psy_desc, + &psy_cfg); + return PTR_ERR_OR_ZERO(ext->psy); +} + +static int cht_wc_extcon_probe(struct platform_device *pdev) +{ + struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); + struct cht_wc_extcon_data *ext; + unsigned long mask = ~(CHT_WC_PWRSRC_VBUS | CHT_WC_PWRSRC_USBID_MASK); + int pwrsrc_sts, id; + int irq, ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + ext = devm_kzalloc(&pdev->dev, sizeof(*ext), GFP_KERNEL); + if (!ext) + return -ENOMEM; + + ext->dev = &pdev->dev; + ext->regmap = pmic->regmap; + ext->previous_cable = EXTCON_NONE; + + /* Initialize extcon device */ + ext->edev = devm_extcon_dev_allocate(ext->dev, cht_wc_extcon_cables); + if (IS_ERR(ext->edev)) + return PTR_ERR(ext->edev); + + switch (pmic->cht_wc_model) { + case INTEL_CHT_WC_GPD_WIN_POCKET: + /* + * When a host-cable is detected the BIOS enables an external 5v boost + * converter to power connected devices there are 2 problems with this: + * 1) This gets seen by the external battery charger as a valid Vbus + * supply and it then tries to feed Vsys from this creating a + * feedback loop which causes aprox. 300 mA extra battery drain + * (and unless we drive the external-charger-disable pin high it + * also tries to charge the battery causing even more feedback). + * 2) This gets seen by the pwrsrc block as a SDP USB Vbus supply + * Since the external battery charger has its own 5v boost converter + * which does not have these issues, we simply turn the separate + * external 5v boost converter off and leave it off entirely. + */ + cht_wc_extcon_set_5v_boost(ext, false); + break; + case INTEL_CHT_WC_LENOVO_YOGABOOK1: + /* Do this first, as it may very well return -EPROBE_DEFER. */ + ret = cht_wc_extcon_get_role_sw_and_regulator(ext); + if (ret) + return ret; + /* + * The bq25890 used here relies on this driver's BC-1.2 charger + * detection, and the bq25890 driver expect this info to be + * available through a parent power_supply class device which + * models the detected charger (idem to how the Type-C TCPM code + * registers a power_supply classdev for the connected charger). + */ + ret = cht_wc_extcon_register_psy(ext); + if (ret) + return ret; + break; + case INTEL_CHT_WC_XIAOMI_MIPAD2: + ret = cht_wc_extcon_get_role_sw_and_regulator(ext); + if (ret) + return ret; + break; + default: + break; + } + + /* Enable sw control */ + ret = cht_wc_extcon_sw_control(ext, true); + if (ret) + goto disable_sw_control; + + /* Disable charging by external battery charger */ + cht_wc_extcon_enable_charging(ext, false); + + /* Register extcon device */ + ret = devm_extcon_dev_register(ext->dev, ext->edev); + if (ret) { + dev_err(ext->dev, "Error registering extcon device: %d\n", ret); + goto disable_sw_control; + } + + ret = regmap_read(ext->regmap, CHT_WC_PWRSRC_STS, &pwrsrc_sts); + if (ret) { + dev_err(ext->dev, "Error reading pwrsrc status: %d\n", ret); + goto disable_sw_control; + } + + /* + * If no USB host or device connected, route D+ and D- to PMIC for + * initial charger detection + */ + id = cht_wc_extcon_get_id(ext, pwrsrc_sts); + if (id != INTEL_USB_ID_GND) + cht_wc_extcon_set_phymux(ext, MUX_SEL_PMIC); + + /* Get initial state */ + cht_wc_extcon_pwrsrc_event(ext); + + ret = devm_request_threaded_irq(ext->dev, irq, NULL, cht_wc_extcon_isr, + IRQF_ONESHOT, pdev->name, ext); + if (ret) { + dev_err(ext->dev, "Error requesting interrupt: %d\n", ret); + goto disable_sw_control; + } + + /* Unmask irqs */ + ret = regmap_write(ext->regmap, CHT_WC_PWRSRC_IRQ_MASK, mask); + if (ret) { + dev_err(ext->dev, "Error writing irq-mask: %d\n", ret); + goto disable_sw_control; + } + + platform_set_drvdata(pdev, ext); + + return 0; + +disable_sw_control: + cht_wc_extcon_sw_control(ext, false); + return ret; +} + +static int cht_wc_extcon_remove(struct platform_device *pdev) +{ + struct cht_wc_extcon_data *ext = platform_get_drvdata(pdev); + + cht_wc_extcon_sw_control(ext, false); + + return 0; +} + +static const struct platform_device_id cht_wc_extcon_table[] = { + { .name = "cht_wcove_pwrsrc" }, + {}, +}; +MODULE_DEVICE_TABLE(platform, cht_wc_extcon_table); + +static struct platform_driver cht_wc_extcon_driver = { + .probe = cht_wc_extcon_probe, + .remove = cht_wc_extcon_remove, + .id_table = cht_wc_extcon_table, + .driver = { + .name = "cht_wcove_pwrsrc", + }, +}; +module_platform_driver(cht_wc_extcon_driver); + +MODULE_DESCRIPTION("Intel Cherrytrail Whiskey Cove PMIC extcon driver"); +MODULE_AUTHOR("Hans de Goede "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3