From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/iio/adc/spear_adc.c | 401 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 401 insertions(+) create mode 100644 drivers/iio/adc/spear_adc.c (limited to 'drivers/iio/adc/spear_adc.c') diff --git a/drivers/iio/adc/spear_adc.c b/drivers/iio/adc/spear_adc.c new file mode 100644 index 000000000..d93e580b3 --- /dev/null +++ b/drivers/iio/adc/spear_adc.c @@ -0,0 +1,401 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ST SPEAr ADC driver + * + * Copyright 2012 Stefan Roese + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* SPEAR registers definitions */ +#define SPEAR600_ADC_SCAN_RATE_LO(x) ((x) & 0xFFFF) +#define SPEAR600_ADC_SCAN_RATE_HI(x) (((x) >> 0x10) & 0xFFFF) +#define SPEAR_ADC_CLK_LOW(x) (((x) & 0xf) << 0) +#define SPEAR_ADC_CLK_HIGH(x) (((x) & 0xf) << 4) + +/* Bit definitions for SPEAR_ADC_STATUS */ +#define SPEAR_ADC_STATUS_START_CONVERSION BIT(0) +#define SPEAR_ADC_STATUS_CHANNEL_NUM(x) ((x) << 1) +#define SPEAR_ADC_STATUS_ADC_ENABLE BIT(4) +#define SPEAR_ADC_STATUS_AVG_SAMPLE(x) ((x) << 5) +#define SPEAR_ADC_STATUS_VREF_INTERNAL BIT(9) + +#define SPEAR_ADC_DATA_MASK 0x03ff +#define SPEAR_ADC_DATA_BITS 10 + +#define SPEAR_ADC_MOD_NAME "spear-adc" + +#define SPEAR_ADC_CHANNEL_NUM 8 + +#define SPEAR_ADC_CLK_MIN 2500000 +#define SPEAR_ADC_CLK_MAX 20000000 + +struct adc_regs_spear3xx { + u32 status; + u32 average; + u32 scan_rate; + u32 clk; /* Not avail for 1340 & 1310 */ + u32 ch_ctrl[SPEAR_ADC_CHANNEL_NUM]; + u32 ch_data[SPEAR_ADC_CHANNEL_NUM]; +}; + +struct chan_data { + u32 lsb; + u32 msb; +}; + +struct adc_regs_spear6xx { + u32 status; + u32 pad[2]; + u32 clk; + u32 ch_ctrl[SPEAR_ADC_CHANNEL_NUM]; + struct chan_data ch_data[SPEAR_ADC_CHANNEL_NUM]; + u32 scan_rate_lo; + u32 scan_rate_hi; + struct chan_data average; +}; + +struct spear_adc_state { + struct device_node *np; + struct adc_regs_spear3xx __iomem *adc_base_spear3xx; + struct adc_regs_spear6xx __iomem *adc_base_spear6xx; + struct clk *clk; + struct completion completion; + /* + * Lock to protect the device state during a potential concurrent + * read access from userspace. Reading a raw value requires a sequence + * of register writes, then a wait for a completion callback, + * and finally a register read, during which userspace could issue + * another read request. This lock protects a read access from + * ocurring before another one has finished. + */ + struct mutex lock; + u32 current_clk; + u32 sampling_freq; + u32 avg_samples; + u32 vref_external; + u32 value; +}; + +/* + * Functions to access some SPEAr ADC register. Abstracted into + * static inline functions, because of different register offsets + * on different SoC variants (SPEAr300 vs SPEAr600 etc). + */ +static void spear_adc_set_status(struct spear_adc_state *st, u32 val) +{ + __raw_writel(val, &st->adc_base_spear6xx->status); +} + +static void spear_adc_set_clk(struct spear_adc_state *st, u32 val) +{ + u32 clk_high, clk_low, count; + u32 apb_clk = clk_get_rate(st->clk); + + count = DIV_ROUND_UP(apb_clk, val); + clk_low = count / 2; + clk_high = count - clk_low; + st->current_clk = apb_clk / count; + + __raw_writel(SPEAR_ADC_CLK_LOW(clk_low) | SPEAR_ADC_CLK_HIGH(clk_high), + &st->adc_base_spear6xx->clk); +} + +static void spear_adc_set_ctrl(struct spear_adc_state *st, int n, + u32 val) +{ + __raw_writel(val, &st->adc_base_spear6xx->ch_ctrl[n]); +} + +static u32 spear_adc_get_average(struct spear_adc_state *st) +{ + if (of_device_is_compatible(st->np, "st,spear600-adc")) { + return __raw_readl(&st->adc_base_spear6xx->average.msb) & + SPEAR_ADC_DATA_MASK; + } else { + return __raw_readl(&st->adc_base_spear3xx->average) & + SPEAR_ADC_DATA_MASK; + } +} + +static void spear_adc_set_scanrate(struct spear_adc_state *st, u32 rate) +{ + if (of_device_is_compatible(st->np, "st,spear600-adc")) { + __raw_writel(SPEAR600_ADC_SCAN_RATE_LO(rate), + &st->adc_base_spear6xx->scan_rate_lo); + __raw_writel(SPEAR600_ADC_SCAN_RATE_HI(rate), + &st->adc_base_spear6xx->scan_rate_hi); + } else { + __raw_writel(rate, &st->adc_base_spear3xx->scan_rate); + } +} + +static int spear_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + struct spear_adc_state *st = iio_priv(indio_dev); + u32 status; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&st->lock); + + status = SPEAR_ADC_STATUS_CHANNEL_NUM(chan->channel) | + SPEAR_ADC_STATUS_AVG_SAMPLE(st->avg_samples) | + SPEAR_ADC_STATUS_START_CONVERSION | + SPEAR_ADC_STATUS_ADC_ENABLE; + if (st->vref_external == 0) + status |= SPEAR_ADC_STATUS_VREF_INTERNAL; + + spear_adc_set_status(st, status); + wait_for_completion(&st->completion); /* set by ISR */ + *val = st->value; + + mutex_unlock(&st->lock); + + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + *val = st->vref_external; + *val2 = SPEAR_ADC_DATA_BITS; + return IIO_VAL_FRACTIONAL_LOG2; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = st->current_clk; + return IIO_VAL_INT; + } + + return -EINVAL; +} + +static int spear_adc_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct spear_adc_state *st = iio_priv(indio_dev); + int ret = 0; + + if (mask != IIO_CHAN_INFO_SAMP_FREQ) + return -EINVAL; + + mutex_lock(&st->lock); + + if ((val < SPEAR_ADC_CLK_MIN) || + (val > SPEAR_ADC_CLK_MAX) || + (val2 != 0)) { + ret = -EINVAL; + goto out; + } + + spear_adc_set_clk(st, val); + +out: + mutex_unlock(&st->lock); + return ret; +} + +#define SPEAR_ADC_CHAN(idx) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\ + .channel = idx, \ +} + +static const struct iio_chan_spec spear_adc_iio_channels[] = { + SPEAR_ADC_CHAN(0), + SPEAR_ADC_CHAN(1), + SPEAR_ADC_CHAN(2), + SPEAR_ADC_CHAN(3), + SPEAR_ADC_CHAN(4), + SPEAR_ADC_CHAN(5), + SPEAR_ADC_CHAN(6), + SPEAR_ADC_CHAN(7), +}; + +static irqreturn_t spear_adc_isr(int irq, void *dev_id) +{ + struct spear_adc_state *st = dev_id; + + /* Read value to clear IRQ */ + st->value = spear_adc_get_average(st); + complete(&st->completion); + + return IRQ_HANDLED; +} + +static int spear_adc_configure(struct spear_adc_state *st) +{ + int i; + + /* Reset ADC core */ + spear_adc_set_status(st, 0); + __raw_writel(0, &st->adc_base_spear6xx->clk); + for (i = 0; i < 8; i++) + spear_adc_set_ctrl(st, i, 0); + spear_adc_set_scanrate(st, 0); + + spear_adc_set_clk(st, st->sampling_freq); + + return 0; +} + +static const struct iio_info spear_adc_info = { + .read_raw = &spear_adc_read_raw, + .write_raw = &spear_adc_write_raw, +}; + +static int spear_adc_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct spear_adc_state *st; + struct iio_dev *indio_dev = NULL; + int ret = -ENODEV; + int irq; + + indio_dev = devm_iio_device_alloc(dev, sizeof(struct spear_adc_state)); + if (!indio_dev) { + dev_err(dev, "failed allocating iio device\n"); + return -ENOMEM; + } + + st = iio_priv(indio_dev); + + mutex_init(&st->lock); + + st->np = np; + + /* + * SPEAr600 has a different register layout than other SPEAr SoC's + * (e.g. SPEAr3xx). Let's provide two register base addresses + * to support multi-arch kernels. + */ + st->adc_base_spear6xx = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(st->adc_base_spear6xx)) + return PTR_ERR(st->adc_base_spear6xx); + + st->adc_base_spear3xx = + (struct adc_regs_spear3xx __iomem *)st->adc_base_spear6xx; + + st->clk = devm_clk_get(dev, NULL); + if (IS_ERR(st->clk)) { + dev_err(dev, "failed getting clock\n"); + return PTR_ERR(st->clk); + } + + ret = clk_prepare_enable(st->clk); + if (ret) { + dev_err(dev, "failed enabling clock\n"); + return ret; + } + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + ret = -EINVAL; + goto errout2; + } + + ret = devm_request_irq(dev, irq, spear_adc_isr, 0, SPEAR_ADC_MOD_NAME, + st); + if (ret < 0) { + dev_err(dev, "failed requesting interrupt\n"); + goto errout2; + } + + if (of_property_read_u32(np, "sampling-frequency", + &st->sampling_freq)) { + dev_err(dev, "sampling-frequency missing in DT\n"); + ret = -EINVAL; + goto errout2; + } + + /* + * Optional avg_samples defaults to 0, resulting in single data + * conversion + */ + of_property_read_u32(np, "average-samples", &st->avg_samples); + + /* + * Optional vref_external defaults to 0, resulting in internal vref + * selection + */ + of_property_read_u32(np, "vref-external", &st->vref_external); + + spear_adc_configure(st); + + platform_set_drvdata(pdev, indio_dev); + + init_completion(&st->completion); + + indio_dev->name = SPEAR_ADC_MOD_NAME; + indio_dev->info = &spear_adc_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = spear_adc_iio_channels; + indio_dev->num_channels = ARRAY_SIZE(spear_adc_iio_channels); + + ret = iio_device_register(indio_dev); + if (ret) + goto errout2; + + dev_info(dev, "SPEAR ADC driver loaded, IRQ %d\n", irq); + + return 0; + +errout2: + clk_disable_unprepare(st->clk); + return ret; +} + +static int spear_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct spear_adc_state *st = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + clk_disable_unprepare(st->clk); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id spear_adc_dt_ids[] = { + { .compatible = "st,spear600-adc", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, spear_adc_dt_ids); +#endif + +static struct platform_driver spear_adc_driver = { + .probe = spear_adc_probe, + .remove = spear_adc_remove, + .driver = { + .name = SPEAR_ADC_MOD_NAME, + .of_match_table = of_match_ptr(spear_adc_dt_ids), + }, +}; + +module_platform_driver(spear_adc_driver); + +MODULE_AUTHOR("Stefan Roese "); +MODULE_DESCRIPTION("SPEAr ADC driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3