From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/iio/pressure/zpa2326.h | 81 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+) create mode 100644 drivers/iio/pressure/zpa2326.h (limited to 'drivers/iio/pressure/zpa2326.h') diff --git a/drivers/iio/pressure/zpa2326.h b/drivers/iio/pressure/zpa2326.h new file mode 100644 index 000000000..45bd79009 --- /dev/null +++ b/drivers/iio/pressure/zpa2326.h @@ -0,0 +1,81 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Murata ZPA2326 pressure and temperature sensor IIO driver + * + * Copyright (c) 2016 Parrot S.A. + * + * Author: Gregor Boirie + */ + +#ifndef _ZPA2326_H +#define _ZPA2326_H + +/* Register map. */ +#define ZPA2326_REF_P_XL_REG (0x8) +#define ZPA2326_REF_P_L_REG (0x9) +#define ZPA2326_REF_P_H_REG (0xa) +#define ZPA2326_DEVICE_ID_REG (0xf) +#define ZPA2326_DEVICE_ID (0xb9) +#define ZPA2326_RES_CONF_REG (0x10) +#define ZPA2326_CTRL_REG0_REG (0x20) +#define ZPA2326_CTRL_REG0_ONE_SHOT BIT(0) +#define ZPA2326_CTRL_REG0_ENABLE BIT(1) +#define ZPA2326_CTRL_REG1_REG (0x21) +#define ZPA2326_CTRL_REG1_MASK_DATA_READY BIT(2) +#define ZPA2326_CTRL_REG2_REG (0x22) +#define ZPA2326_CTRL_REG2_SWRESET BIT(2) +#define ZPA2326_CTRL_REG3_REG (0x23) +#define ZPA2326_CTRL_REG3_ODR_SHIFT (4) +#define ZPA2326_CTRL_REG3_ENABLE_MEAS BIT(7) +#define ZPA2326_INT_SOURCE_REG (0x24) +#define ZPA2326_INT_SOURCE_DATA_READY BIT(2) +#define ZPA2326_THS_P_LOW_REG (0x25) +#define ZPA2326_THS_P_HIGH_REG (0x26) +#define ZPA2326_STATUS_REG (0x27) +#define ZPA2326_STATUS_P_DA BIT(1) +#define ZPA2326_STATUS_FIFO_E BIT(2) +#define ZPA2326_STATUS_P_OR BIT(5) +#define ZPA2326_PRESS_OUT_XL_REG (0x28) +#define ZPA2326_PRESS_OUT_L_REG (0x29) +#define ZPA2326_PRESS_OUT_H_REG (0x2a) +#define ZPA2326_TEMP_OUT_L_REG (0x2b) +#define ZPA2326_TEMP_OUT_H_REG (0x2c) + +struct device; +struct regmap; + +bool zpa2326_isreg_writeable(struct device *dev, unsigned int reg); +bool zpa2326_isreg_readable(struct device *dev, unsigned int reg); +bool zpa2326_isreg_precious(struct device *dev, unsigned int reg); + +/** + * zpa2326_probe() - Instantiate and register core ZPA2326 IIO device + * @parent: Hardware sampling device the created IIO device will be a child of. + * @name: Arbitrary name to identify the device. + * @irq: Interrupt line, negative if none. + * @hwid: Expected device hardware id. + * @regmap: Registers map used to abstract underlying bus accesses. + * + * Return: Zero when successful, a negative error code otherwise. + */ +int zpa2326_probe(struct device *parent, + const char *name, + int irq, + unsigned int hwid, + struct regmap *regmap); + +/** + * zpa2326_remove() - Unregister and destroy core ZPA2326 IIO device. + * @parent: Hardware sampling device the IIO device to remove is a child of. + */ +void zpa2326_remove(const struct device *parent); + +#ifdef CONFIG_PM +#include +extern const struct dev_pm_ops zpa2326_pm_ops; +#define ZPA2326_PM_OPS (&zpa2326_pm_ops) +#else +#define ZPA2326_PM_OPS (NULL) +#endif + +#endif -- cgit v1.2.3