From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/mmc/host/mmci.c | 2471 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 2471 insertions(+) create mode 100644 drivers/mmc/host/mmci.c (limited to 'drivers/mmc/host/mmci.c') diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c new file mode 100644 index 000000000..9728b093f --- /dev/null +++ b/drivers/mmc/host/mmci.c @@ -0,0 +1,2471 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/mmc/host/mmci.c - ARM PrimeCell MMCI PL180/1 driver + * + * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. + * Copyright (C) 2010 ST-Ericsson SA + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "mmci.h" + +#define DRIVER_NAME "mmci-pl18x" + +static void mmci_variant_init(struct mmci_host *host); +static void ux500_variant_init(struct mmci_host *host); +static void ux500v2_variant_init(struct mmci_host *host); + +static unsigned int fmax = 515633; + +static struct variant_data variant_arm = { + .fifosize = 16 * 4, + .fifohalfsize = 8 * 4, + .cmdreg_cpsm_enable = MCI_CPSM_ENABLE, + .cmdreg_lrsp_crc = MCI_CPSM_RESPONSE | MCI_CPSM_LONGRSP, + .cmdreg_srsp_crc = MCI_CPSM_RESPONSE, + .cmdreg_srsp = MCI_CPSM_RESPONSE, + .datalength_bits = 16, + .datactrl_blocksz = 11, + .pwrreg_powerup = MCI_PWR_UP, + .f_max = 100000000, + .reversed_irq_handling = true, + .mmcimask1 = true, + .irq_pio_mask = MCI_IRQ_PIO_MASK, + .start_err = MCI_STARTBITERR, + .opendrain = MCI_ROD, + .init = mmci_variant_init, +}; + +static struct variant_data variant_arm_extended_fifo = { + .fifosize = 128 * 4, + .fifohalfsize = 64 * 4, + .cmdreg_cpsm_enable = MCI_CPSM_ENABLE, + .cmdreg_lrsp_crc = MCI_CPSM_RESPONSE | MCI_CPSM_LONGRSP, + .cmdreg_srsp_crc = MCI_CPSM_RESPONSE, + .cmdreg_srsp = MCI_CPSM_RESPONSE, + .datalength_bits = 16, + .datactrl_blocksz = 11, + .pwrreg_powerup = MCI_PWR_UP, + .f_max = 100000000, + .mmcimask1 = true, + .irq_pio_mask = MCI_IRQ_PIO_MASK, + .start_err = MCI_STARTBITERR, + .opendrain = MCI_ROD, + .init = mmci_variant_init, +}; + +static struct variant_data variant_arm_extended_fifo_hwfc = { + .fifosize = 128 * 4, + .fifohalfsize = 64 * 4, + .clkreg_enable = MCI_ARM_HWFCEN, + .cmdreg_cpsm_enable = MCI_CPSM_ENABLE, + .cmdreg_lrsp_crc = MCI_CPSM_RESPONSE | MCI_CPSM_LONGRSP, + .cmdreg_srsp_crc = MCI_CPSM_RESPONSE, + .cmdreg_srsp = MCI_CPSM_RESPONSE, + .datalength_bits = 16, + .datactrl_blocksz = 11, + .pwrreg_powerup = MCI_PWR_UP, + .f_max = 100000000, + .mmcimask1 = true, + .irq_pio_mask = MCI_IRQ_PIO_MASK, + .start_err = MCI_STARTBITERR, + .opendrain = MCI_ROD, + .init = mmci_variant_init, +}; + +static struct variant_data variant_u300 = { + .fifosize = 16 * 4, + .fifohalfsize = 8 * 4, + .clkreg_enable = MCI_ST_U300_HWFCEN, + .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS, + .cmdreg_cpsm_enable = MCI_CPSM_ENABLE, + .cmdreg_lrsp_crc = MCI_CPSM_RESPONSE | MCI_CPSM_LONGRSP, + .cmdreg_srsp_crc = MCI_CPSM_RESPONSE, + .cmdreg_srsp = MCI_CPSM_RESPONSE, + .datalength_bits = 16, + .datactrl_blocksz = 11, + .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, + .st_sdio = true, + .pwrreg_powerup = MCI_PWR_ON, + .f_max = 100000000, + .signal_direction = true, + .pwrreg_clkgate = true, + .pwrreg_nopower = true, + .mmcimask1 = true, + .irq_pio_mask = MCI_IRQ_PIO_MASK, + .start_err = MCI_STARTBITERR, + .opendrain = MCI_OD, + .init = mmci_variant_init, +}; + +static struct variant_data variant_nomadik = { + .fifosize = 16 * 4, + .fifohalfsize = 8 * 4, + .clkreg = MCI_CLK_ENABLE, + .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS, + .cmdreg_cpsm_enable = MCI_CPSM_ENABLE, + .cmdreg_lrsp_crc = MCI_CPSM_RESPONSE | MCI_CPSM_LONGRSP, + .cmdreg_srsp_crc = MCI_CPSM_RESPONSE, + .cmdreg_srsp = MCI_CPSM_RESPONSE, + .datalength_bits = 24, + .datactrl_blocksz = 11, + .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, + .st_sdio = true, + .st_clkdiv = true, + .pwrreg_powerup = MCI_PWR_ON, + .f_max = 100000000, + .signal_direction = true, + .pwrreg_clkgate = true, + .pwrreg_nopower = true, + .mmcimask1 = true, + .irq_pio_mask = MCI_IRQ_PIO_MASK, + .start_err = MCI_STARTBITERR, + .opendrain = MCI_OD, + .init = mmci_variant_init, +}; + +static struct variant_data variant_ux500 = { + .fifosize = 30 * 4, + .fifohalfsize = 8 * 4, + .clkreg = MCI_CLK_ENABLE, + .clkreg_enable = MCI_ST_UX500_HWFCEN, + .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS, + .clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE, + .cmdreg_cpsm_enable = MCI_CPSM_ENABLE, + .cmdreg_lrsp_crc = MCI_CPSM_RESPONSE | MCI_CPSM_LONGRSP, + .cmdreg_srsp_crc = MCI_CPSM_RESPONSE, + .cmdreg_srsp = MCI_CPSM_RESPONSE, + .datalength_bits = 24, + .datactrl_blocksz = 11, + .datactrl_any_blocksz = true, + .dma_power_of_2 = true, + .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, + .st_sdio = true, + .st_clkdiv = true, + .pwrreg_powerup = MCI_PWR_ON, + .f_max = 100000000, + .signal_direction = true, + .pwrreg_clkgate = true, + .busy_detect = true, + .busy_dpsm_flag = MCI_DPSM_ST_BUSYMODE, + .busy_detect_flag = MCI_ST_CARDBUSY, + .busy_detect_mask = MCI_ST_BUSYENDMASK, + .pwrreg_nopower = true, + .mmcimask1 = true, + .irq_pio_mask = MCI_IRQ_PIO_MASK, + .start_err = MCI_STARTBITERR, + .opendrain = MCI_OD, + .init = ux500_variant_init, +}; + +static struct variant_data variant_ux500v2 = { + .fifosize = 30 * 4, + .fifohalfsize = 8 * 4, + .clkreg = MCI_CLK_ENABLE, + .clkreg_enable = MCI_ST_UX500_HWFCEN, + .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS, + .clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE, + .cmdreg_cpsm_enable = MCI_CPSM_ENABLE, + .cmdreg_lrsp_crc = MCI_CPSM_RESPONSE | MCI_CPSM_LONGRSP, + .cmdreg_srsp_crc = MCI_CPSM_RESPONSE, + .cmdreg_srsp = MCI_CPSM_RESPONSE, + .datactrl_mask_ddrmode = MCI_DPSM_ST_DDRMODE, + .datalength_bits = 24, + .datactrl_blocksz = 11, + .datactrl_any_blocksz = true, + .dma_power_of_2 = true, + .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, + .st_sdio = true, + .st_clkdiv = true, + .pwrreg_powerup = MCI_PWR_ON, + .f_max = 100000000, + .signal_direction = true, + .pwrreg_clkgate = true, + .busy_detect = true, + .busy_dpsm_flag = MCI_DPSM_ST_BUSYMODE, + .busy_detect_flag = MCI_ST_CARDBUSY, + .busy_detect_mask = MCI_ST_BUSYENDMASK, + .pwrreg_nopower = true, + .mmcimask1 = true, + .irq_pio_mask = MCI_IRQ_PIO_MASK, + .start_err = MCI_STARTBITERR, + .opendrain = MCI_OD, + .init = ux500v2_variant_init, +}; + +static struct variant_data variant_stm32 = { + .fifosize = 32 * 4, + .fifohalfsize = 8 * 4, + .clkreg = MCI_CLK_ENABLE, + .clkreg_enable = MCI_ST_UX500_HWFCEN, + .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS, + .clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE, + .cmdreg_cpsm_enable = MCI_CPSM_ENABLE, + .cmdreg_lrsp_crc = MCI_CPSM_RESPONSE | MCI_CPSM_LONGRSP, + .cmdreg_srsp_crc = MCI_CPSM_RESPONSE, + .cmdreg_srsp = MCI_CPSM_RESPONSE, + .irq_pio_mask = MCI_IRQ_PIO_MASK, + .datalength_bits = 24, + .datactrl_blocksz = 11, + .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, + .st_sdio = true, + .st_clkdiv = true, + .pwrreg_powerup = MCI_PWR_ON, + .f_max = 48000000, + .pwrreg_clkgate = true, + .pwrreg_nopower = true, + .init = mmci_variant_init, +}; + +static struct variant_data variant_stm32_sdmmc = { + .fifosize = 16 * 4, + .fifohalfsize = 8 * 4, + .f_max = 208000000, + .stm32_clkdiv = true, + .cmdreg_cpsm_enable = MCI_CPSM_STM32_ENABLE, + .cmdreg_lrsp_crc = MCI_CPSM_STM32_LRSP_CRC, + .cmdreg_srsp_crc = MCI_CPSM_STM32_SRSP_CRC, + .cmdreg_srsp = MCI_CPSM_STM32_SRSP, + .cmdreg_stop = MCI_CPSM_STM32_CMDSTOP, + .data_cmd_enable = MCI_CPSM_STM32_CMDTRANS, + .irq_pio_mask = MCI_IRQ_PIO_STM32_MASK, + .datactrl_first = true, + .datacnt_useless = true, + .datalength_bits = 25, + .datactrl_blocksz = 14, + .datactrl_any_blocksz = true, + .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, + .stm32_idmabsize_mask = GENMASK(12, 5), + .busy_timeout = true, + .busy_detect = true, + .busy_detect_flag = MCI_STM32_BUSYD0, + .busy_detect_mask = MCI_STM32_BUSYD0ENDMASK, + .init = sdmmc_variant_init, +}; + +static struct variant_data variant_stm32_sdmmcv2 = { + .fifosize = 16 * 4, + .fifohalfsize = 8 * 4, + .f_max = 267000000, + .stm32_clkdiv = true, + .cmdreg_cpsm_enable = MCI_CPSM_STM32_ENABLE, + .cmdreg_lrsp_crc = MCI_CPSM_STM32_LRSP_CRC, + .cmdreg_srsp_crc = MCI_CPSM_STM32_SRSP_CRC, + .cmdreg_srsp = MCI_CPSM_STM32_SRSP, + .cmdreg_stop = MCI_CPSM_STM32_CMDSTOP, + .data_cmd_enable = MCI_CPSM_STM32_CMDTRANS, + .irq_pio_mask = MCI_IRQ_PIO_STM32_MASK, + .datactrl_first = true, + .datacnt_useless = true, + .datalength_bits = 25, + .datactrl_blocksz = 14, + .datactrl_any_blocksz = true, + .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, + .stm32_idmabsize_mask = GENMASK(16, 5), + .dma_lli = true, + .busy_timeout = true, + .busy_detect = true, + .busy_detect_flag = MCI_STM32_BUSYD0, + .busy_detect_mask = MCI_STM32_BUSYD0ENDMASK, + .init = sdmmc_variant_init, +}; + +static struct variant_data variant_qcom = { + .fifosize = 16 * 4, + .fifohalfsize = 8 * 4, + .clkreg = MCI_CLK_ENABLE, + .clkreg_enable = MCI_QCOM_CLK_FLOWENA | + MCI_QCOM_CLK_SELECT_IN_FBCLK, + .clkreg_8bit_bus_enable = MCI_QCOM_CLK_WIDEBUS_8, + .datactrl_mask_ddrmode = MCI_QCOM_CLK_SELECT_IN_DDR_MODE, + .cmdreg_cpsm_enable = MCI_CPSM_ENABLE, + .cmdreg_lrsp_crc = MCI_CPSM_RESPONSE | MCI_CPSM_LONGRSP, + .cmdreg_srsp_crc = MCI_CPSM_RESPONSE, + .cmdreg_srsp = MCI_CPSM_RESPONSE, + .data_cmd_enable = MCI_CPSM_QCOM_DATCMD, + .datalength_bits = 24, + .datactrl_blocksz = 11, + .datactrl_any_blocksz = true, + .pwrreg_powerup = MCI_PWR_UP, + .f_max = 208000000, + .explicit_mclk_control = true, + .qcom_fifo = true, + .qcom_dml = true, + .mmcimask1 = true, + .irq_pio_mask = MCI_IRQ_PIO_MASK, + .start_err = MCI_STARTBITERR, + .opendrain = MCI_ROD, + .init = qcom_variant_init, +}; + +/* Busy detection for the ST Micro variant */ +static int mmci_card_busy(struct mmc_host *mmc) +{ + struct mmci_host *host = mmc_priv(mmc); + unsigned long flags; + int busy = 0; + + spin_lock_irqsave(&host->lock, flags); + if (readl(host->base + MMCISTATUS) & host->variant->busy_detect_flag) + busy = 1; + spin_unlock_irqrestore(&host->lock, flags); + + return busy; +} + +static void mmci_reg_delay(struct mmci_host *host) +{ + /* + * According to the spec, at least three feedback clock cycles + * of max 52 MHz must pass between two writes to the MMCICLOCK reg. + * Three MCLK clock cycles must pass between two MMCIPOWER reg writes. + * Worst delay time during card init is at 100 kHz => 30 us. + * Worst delay time when up and running is at 25 MHz => 120 ns. + */ + if (host->cclk < 25000000) + udelay(30); + else + ndelay(120); +} + +/* + * This must be called with host->lock held + */ +void mmci_write_clkreg(struct mmci_host *host, u32 clk) +{ + if (host->clk_reg != clk) { + host->clk_reg = clk; + writel(clk, host->base + MMCICLOCK); + } +} + +/* + * This must be called with host->lock held + */ +void mmci_write_pwrreg(struct mmci_host *host, u32 pwr) +{ + if (host->pwr_reg != pwr) { + host->pwr_reg = pwr; + writel(pwr, host->base + MMCIPOWER); + } +} + +/* + * This must be called with host->lock held + */ +static void mmci_write_datactrlreg(struct mmci_host *host, u32 datactrl) +{ + /* Keep busy mode in DPSM if enabled */ + datactrl |= host->datactrl_reg & host->variant->busy_dpsm_flag; + + if (host->datactrl_reg != datactrl) { + host->datactrl_reg = datactrl; + writel(datactrl, host->base + MMCIDATACTRL); + } +} + +/* + * This must be called with host->lock held + */ +static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) +{ + struct variant_data *variant = host->variant; + u32 clk = variant->clkreg; + + /* Make sure cclk reflects the current calculated clock */ + host->cclk = 0; + + if (desired) { + if (variant->explicit_mclk_control) { + host->cclk = host->mclk; + } else if (desired >= host->mclk) { + clk = MCI_CLK_BYPASS; + if (variant->st_clkdiv) + clk |= MCI_ST_UX500_NEG_EDGE; + host->cclk = host->mclk; + } else if (variant->st_clkdiv) { + /* + * DB8500 TRM says f = mclk / (clkdiv + 2) + * => clkdiv = (mclk / f) - 2 + * Round the divider up so we don't exceed the max + * frequency + */ + clk = DIV_ROUND_UP(host->mclk, desired) - 2; + if (clk >= 256) + clk = 255; + host->cclk = host->mclk / (clk + 2); + } else { + /* + * PL180 TRM says f = mclk / (2 * (clkdiv + 1)) + * => clkdiv = mclk / (2 * f) - 1 + */ + clk = host->mclk / (2 * desired) - 1; + if (clk >= 256) + clk = 255; + host->cclk = host->mclk / (2 * (clk + 1)); + } + + clk |= variant->clkreg_enable; + clk |= MCI_CLK_ENABLE; + /* This hasn't proven to be worthwhile */ + /* clk |= MCI_CLK_PWRSAVE; */ + } + + /* Set actual clock for debug */ + host->mmc->actual_clock = host->cclk; + + if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) + clk |= MCI_4BIT_BUS; + if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_8) + clk |= variant->clkreg_8bit_bus_enable; + + if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50 || + host->mmc->ios.timing == MMC_TIMING_MMC_DDR52) + clk |= variant->clkreg_neg_edge_enable; + + mmci_write_clkreg(host, clk); +} + +static void mmci_dma_release(struct mmci_host *host) +{ + if (host->ops && host->ops->dma_release) + host->ops->dma_release(host); + + host->use_dma = false; +} + +static void mmci_dma_setup(struct mmci_host *host) +{ + if (!host->ops || !host->ops->dma_setup) + return; + + if (host->ops->dma_setup(host)) + return; + + /* initialize pre request cookie */ + host->next_cookie = 1; + + host->use_dma = true; +} + +/* + * Validate mmc prerequisites + */ +static int mmci_validate_data(struct mmci_host *host, + struct mmc_data *data) +{ + struct variant_data *variant = host->variant; + + if (!data) + return 0; + if (!is_power_of_2(data->blksz) && !variant->datactrl_any_blocksz) { + dev_err(mmc_dev(host->mmc), + "unsupported block size (%d bytes)\n", data->blksz); + return -EINVAL; + } + + if (host->ops && host->ops->validate_data) + return host->ops->validate_data(host, data); + + return 0; +} + +static int mmci_prep_data(struct mmci_host *host, struct mmc_data *data, bool next) +{ + int err; + + if (!host->ops || !host->ops->prep_data) + return 0; + + err = host->ops->prep_data(host, data, next); + + if (next && !err) + data->host_cookie = ++host->next_cookie < 0 ? + 1 : host->next_cookie; + + return err; +} + +static void mmci_unprep_data(struct mmci_host *host, struct mmc_data *data, + int err) +{ + if (host->ops && host->ops->unprep_data) + host->ops->unprep_data(host, data, err); + + data->host_cookie = 0; +} + +static void mmci_get_next_data(struct mmci_host *host, struct mmc_data *data) +{ + WARN_ON(data->host_cookie && data->host_cookie != host->next_cookie); + + if (host->ops && host->ops->get_next_data) + host->ops->get_next_data(host, data); +} + +static int mmci_dma_start(struct mmci_host *host, unsigned int datactrl) +{ + struct mmc_data *data = host->data; + int ret; + + if (!host->use_dma) + return -EINVAL; + + ret = mmci_prep_data(host, data, false); + if (ret) + return ret; + + if (!host->ops || !host->ops->dma_start) + return -EINVAL; + + /* Okay, go for it. */ + dev_vdbg(mmc_dev(host->mmc), + "Submit MMCI DMA job, sglen %d blksz %04x blks %04x flags %08x\n", + data->sg_len, data->blksz, data->blocks, data->flags); + + ret = host->ops->dma_start(host, &datactrl); + if (ret) + return ret; + + /* Trigger the DMA transfer */ + mmci_write_datactrlreg(host, datactrl); + + /* + * Let the MMCI say when the data is ended and it's time + * to fire next DMA request. When that happens, MMCI will + * call mmci_data_end() + */ + writel(readl(host->base + MMCIMASK0) | MCI_DATAENDMASK, + host->base + MMCIMASK0); + return 0; +} + +static void mmci_dma_finalize(struct mmci_host *host, struct mmc_data *data) +{ + if (!host->use_dma) + return; + + if (host->ops && host->ops->dma_finalize) + host->ops->dma_finalize(host, data); +} + +static void mmci_dma_error(struct mmci_host *host) +{ + if (!host->use_dma) + return; + + if (host->ops && host->ops->dma_error) + host->ops->dma_error(host); +} + +static void +mmci_request_end(struct mmci_host *host, struct mmc_request *mrq) +{ + writel(0, host->base + MMCICOMMAND); + + BUG_ON(host->data); + + host->mrq = NULL; + host->cmd = NULL; + + mmc_request_done(host->mmc, mrq); +} + +static void mmci_set_mask1(struct mmci_host *host, unsigned int mask) +{ + void __iomem *base = host->base; + struct variant_data *variant = host->variant; + + if (host->singleirq) { + unsigned int mask0 = readl(base + MMCIMASK0); + + mask0 &= ~variant->irq_pio_mask; + mask0 |= mask; + + writel(mask0, base + MMCIMASK0); + } + + if (variant->mmcimask1) + writel(mask, base + MMCIMASK1); + + host->mask1_reg = mask; +} + +static void mmci_stop_data(struct mmci_host *host) +{ + mmci_write_datactrlreg(host, 0); + mmci_set_mask1(host, 0); + host->data = NULL; +} + +static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data) +{ + unsigned int flags = SG_MITER_ATOMIC; + + if (data->flags & MMC_DATA_READ) + flags |= SG_MITER_TO_SG; + else + flags |= SG_MITER_FROM_SG; + + sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags); +} + +static u32 mmci_get_dctrl_cfg(struct mmci_host *host) +{ + return MCI_DPSM_ENABLE | mmci_dctrl_blksz(host); +} + +static u32 ux500v2_get_dctrl_cfg(struct mmci_host *host) +{ + return MCI_DPSM_ENABLE | (host->data->blksz << 16); +} + +static bool ux500_busy_complete(struct mmci_host *host, u32 status, u32 err_msk) +{ + void __iomem *base = host->base; + + /* + * Before unmasking for the busy end IRQ, confirm that the + * command was sent successfully. To keep track of having a + * command in-progress, waiting for busy signaling to end, + * store the status in host->busy_status. + * + * Note that, the card may need a couple of clock cycles before + * it starts signaling busy on DAT0, hence re-read the + * MMCISTATUS register here, to allow the busy bit to be set. + * Potentially we may even need to poll the register for a + * while, to allow it to be set, but tests indicates that it + * isn't needed. + */ + if (!host->busy_status && !(status & err_msk) && + (readl(base + MMCISTATUS) & host->variant->busy_detect_flag)) { + writel(readl(base + MMCIMASK0) | + host->variant->busy_detect_mask, + base + MMCIMASK0); + + host->busy_status = status & (MCI_CMDSENT | MCI_CMDRESPEND); + return false; + } + + /* + * If there is a command in-progress that has been successfully + * sent, then bail out if busy status is set and wait for the + * busy end IRQ. + * + * Note that, the HW triggers an IRQ on both edges while + * monitoring DAT0 for busy completion, but there is only one + * status bit in MMCISTATUS for the busy state. Therefore + * both the start and the end interrupts needs to be cleared, + * one after the other. So, clear the busy start IRQ here. + */ + if (host->busy_status && + (status & host->variant->busy_detect_flag)) { + writel(host->variant->busy_detect_mask, base + MMCICLEAR); + return false; + } + + /* + * If there is a command in-progress that has been successfully + * sent and the busy bit isn't set, it means we have received + * the busy end IRQ. Clear and mask the IRQ, then continue to + * process the command. + */ + if (host->busy_status) { + writel(host->variant->busy_detect_mask, base + MMCICLEAR); + + writel(readl(base + MMCIMASK0) & + ~host->variant->busy_detect_mask, base + MMCIMASK0); + host->busy_status = 0; + } + + return true; +} + +/* + * All the DMA operation mode stuff goes inside this ifdef. + * This assumes that you have a generic DMA device interface, + * no custom DMA interfaces are supported. + */ +#ifdef CONFIG_DMA_ENGINE +struct mmci_dmae_next { + struct dma_async_tx_descriptor *desc; + struct dma_chan *chan; +}; + +struct mmci_dmae_priv { + struct dma_chan *cur; + struct dma_chan *rx_channel; + struct dma_chan *tx_channel; + struct dma_async_tx_descriptor *desc_current; + struct mmci_dmae_next next_data; +}; + +int mmci_dmae_setup(struct mmci_host *host) +{ + const char *rxname, *txname; + struct mmci_dmae_priv *dmae; + + dmae = devm_kzalloc(mmc_dev(host->mmc), sizeof(*dmae), GFP_KERNEL); + if (!dmae) + return -ENOMEM; + + host->dma_priv = dmae; + + dmae->rx_channel = dma_request_chan(mmc_dev(host->mmc), "rx"); + if (IS_ERR(dmae->rx_channel)) { + int ret = PTR_ERR(dmae->rx_channel); + dmae->rx_channel = NULL; + return ret; + } + + dmae->tx_channel = dma_request_chan(mmc_dev(host->mmc), "tx"); + if (IS_ERR(dmae->tx_channel)) { + if (PTR_ERR(dmae->tx_channel) == -EPROBE_DEFER) + dev_warn(mmc_dev(host->mmc), + "Deferred probe for TX channel ignored\n"); + dmae->tx_channel = NULL; + } + + /* + * If only an RX channel is specified, the driver will + * attempt to use it bidirectionally, however if it + * is specified but cannot be located, DMA will be disabled. + */ + if (dmae->rx_channel && !dmae->tx_channel) + dmae->tx_channel = dmae->rx_channel; + + if (dmae->rx_channel) + rxname = dma_chan_name(dmae->rx_channel); + else + rxname = "none"; + + if (dmae->tx_channel) + txname = dma_chan_name(dmae->tx_channel); + else + txname = "none"; + + dev_info(mmc_dev(host->mmc), "DMA channels RX %s, TX %s\n", + rxname, txname); + + /* + * Limit the maximum segment size in any SG entry according to + * the parameters of the DMA engine device. + */ + if (dmae->tx_channel) { + struct device *dev = dmae->tx_channel->device->dev; + unsigned int max_seg_size = dma_get_max_seg_size(dev); + + if (max_seg_size < host->mmc->max_seg_size) + host->mmc->max_seg_size = max_seg_size; + } + if (dmae->rx_channel) { + struct device *dev = dmae->rx_channel->device->dev; + unsigned int max_seg_size = dma_get_max_seg_size(dev); + + if (max_seg_size < host->mmc->max_seg_size) + host->mmc->max_seg_size = max_seg_size; + } + + if (!dmae->tx_channel || !dmae->rx_channel) { + mmci_dmae_release(host); + return -EINVAL; + } + + return 0; +} + +/* + * This is used in or so inline it + * so it can be discarded. + */ +void mmci_dmae_release(struct mmci_host *host) +{ + struct mmci_dmae_priv *dmae = host->dma_priv; + + if (dmae->rx_channel) + dma_release_channel(dmae->rx_channel); + if (dmae->tx_channel) + dma_release_channel(dmae->tx_channel); + dmae->rx_channel = dmae->tx_channel = NULL; +} + +static void mmci_dma_unmap(struct mmci_host *host, struct mmc_data *data) +{ + struct mmci_dmae_priv *dmae = host->dma_priv; + struct dma_chan *chan; + + if (data->flags & MMC_DATA_READ) + chan = dmae->rx_channel; + else + chan = dmae->tx_channel; + + dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, + mmc_get_dma_dir(data)); +} + +void mmci_dmae_error(struct mmci_host *host) +{ + struct mmci_dmae_priv *dmae = host->dma_priv; + + if (!dma_inprogress(host)) + return; + + dev_err(mmc_dev(host->mmc), "error during DMA transfer!\n"); + dmaengine_terminate_all(dmae->cur); + host->dma_in_progress = false; + dmae->cur = NULL; + dmae->desc_current = NULL; + host->data->host_cookie = 0; + + mmci_dma_unmap(host, host->data); +} + +void mmci_dmae_finalize(struct mmci_host *host, struct mmc_data *data) +{ + struct mmci_dmae_priv *dmae = host->dma_priv; + u32 status; + int i; + + if (!dma_inprogress(host)) + return; + + /* Wait up to 1ms for the DMA to complete */ + for (i = 0; ; i++) { + status = readl(host->base + MMCISTATUS); + if (!(status & MCI_RXDATAAVLBLMASK) || i >= 100) + break; + udelay(10); + } + + /* + * Check to see whether we still have some data left in the FIFO - + * this catches DMA controllers which are unable to monitor the + * DMALBREQ and DMALSREQ signals while allowing us to DMA to non- + * contiguous buffers. On TX, we'll get a FIFO underrun error. + */ + if (status & MCI_RXDATAAVLBLMASK) { + mmci_dma_error(host); + if (!data->error) + data->error = -EIO; + } else if (!data->host_cookie) { + mmci_dma_unmap(host, data); + } + + /* + * Use of DMA with scatter-gather is impossible. + * Give up with DMA and switch back to PIO mode. + */ + if (status & MCI_RXDATAAVLBLMASK) { + dev_err(mmc_dev(host->mmc), "buggy DMA detected. Taking evasive action.\n"); + mmci_dma_release(host); + } + + host->dma_in_progress = false; + dmae->cur = NULL; + dmae->desc_current = NULL; +} + +/* prepares DMA channel and DMA descriptor, returns non-zero on failure */ +static int _mmci_dmae_prep_data(struct mmci_host *host, struct mmc_data *data, + struct dma_chan **dma_chan, + struct dma_async_tx_descriptor **dma_desc) +{ + struct mmci_dmae_priv *dmae = host->dma_priv; + struct variant_data *variant = host->variant; + struct dma_slave_config conf = { + .src_addr = host->phybase + MMCIFIFO, + .dst_addr = host->phybase + MMCIFIFO, + .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .src_maxburst = variant->fifohalfsize >> 2, /* # of words */ + .dst_maxburst = variant->fifohalfsize >> 2, /* # of words */ + .device_fc = false, + }; + struct dma_chan *chan; + struct dma_device *device; + struct dma_async_tx_descriptor *desc; + int nr_sg; + unsigned long flags = DMA_CTRL_ACK; + + if (data->flags & MMC_DATA_READ) { + conf.direction = DMA_DEV_TO_MEM; + chan = dmae->rx_channel; + } else { + conf.direction = DMA_MEM_TO_DEV; + chan = dmae->tx_channel; + } + + /* If there's no DMA channel, fall back to PIO */ + if (!chan) + return -EINVAL; + + /* If less than or equal to the fifo size, don't bother with DMA */ + if (data->blksz * data->blocks <= variant->fifosize) + return -EINVAL; + + /* + * This is necessary to get SDIO working on the Ux500. We do not yet + * know if this is a bug in: + * - The Ux500 DMA controller (DMA40) + * - The MMCI DMA interface on the Ux500 + * some power of two blocks (such as 64 bytes) are sent regularly + * during SDIO traffic and those work fine so for these we enable DMA + * transfers. + */ + if (host->variant->dma_power_of_2 && !is_power_of_2(data->blksz)) + return -EINVAL; + + device = chan->device; + nr_sg = dma_map_sg(device->dev, data->sg, data->sg_len, + mmc_get_dma_dir(data)); + if (nr_sg == 0) + return -EINVAL; + + if (host->variant->qcom_dml) + flags |= DMA_PREP_INTERRUPT; + + dmaengine_slave_config(chan, &conf); + desc = dmaengine_prep_slave_sg(chan, data->sg, nr_sg, + conf.direction, flags); + if (!desc) + goto unmap_exit; + + *dma_chan = chan; + *dma_desc = desc; + + return 0; + + unmap_exit: + dma_unmap_sg(device->dev, data->sg, data->sg_len, + mmc_get_dma_dir(data)); + return -ENOMEM; +} + +int mmci_dmae_prep_data(struct mmci_host *host, + struct mmc_data *data, + bool next) +{ + struct mmci_dmae_priv *dmae = host->dma_priv; + struct mmci_dmae_next *nd = &dmae->next_data; + + if (!host->use_dma) + return -EINVAL; + + if (next) + return _mmci_dmae_prep_data(host, data, &nd->chan, &nd->desc); + /* Check if next job is already prepared. */ + if (dmae->cur && dmae->desc_current) + return 0; + + /* No job were prepared thus do it now. */ + return _mmci_dmae_prep_data(host, data, &dmae->cur, + &dmae->desc_current); +} + +int mmci_dmae_start(struct mmci_host *host, unsigned int *datactrl) +{ + struct mmci_dmae_priv *dmae = host->dma_priv; + int ret; + + host->dma_in_progress = true; + ret = dma_submit_error(dmaengine_submit(dmae->desc_current)); + if (ret < 0) { + host->dma_in_progress = false; + return ret; + } + dma_async_issue_pending(dmae->cur); + + *datactrl |= MCI_DPSM_DMAENABLE; + + return 0; +} + +void mmci_dmae_get_next_data(struct mmci_host *host, struct mmc_data *data) +{ + struct mmci_dmae_priv *dmae = host->dma_priv; + struct mmci_dmae_next *next = &dmae->next_data; + + if (!host->use_dma) + return; + + WARN_ON(!data->host_cookie && (next->desc || next->chan)); + + dmae->desc_current = next->desc; + dmae->cur = next->chan; + next->desc = NULL; + next->chan = NULL; +} + +void mmci_dmae_unprep_data(struct mmci_host *host, + struct mmc_data *data, int err) + +{ + struct mmci_dmae_priv *dmae = host->dma_priv; + + if (!host->use_dma) + return; + + mmci_dma_unmap(host, data); + + if (err) { + struct mmci_dmae_next *next = &dmae->next_data; + struct dma_chan *chan; + if (data->flags & MMC_DATA_READ) + chan = dmae->rx_channel; + else + chan = dmae->tx_channel; + dmaengine_terminate_all(chan); + + if (dmae->desc_current == next->desc) + dmae->desc_current = NULL; + + if (dmae->cur == next->chan) { + host->dma_in_progress = false; + dmae->cur = NULL; + } + + next->desc = NULL; + next->chan = NULL; + } +} + +static struct mmci_host_ops mmci_variant_ops = { + .prep_data = mmci_dmae_prep_data, + .unprep_data = mmci_dmae_unprep_data, + .get_datactrl_cfg = mmci_get_dctrl_cfg, + .get_next_data = mmci_dmae_get_next_data, + .dma_setup = mmci_dmae_setup, + .dma_release = mmci_dmae_release, + .dma_start = mmci_dmae_start, + .dma_finalize = mmci_dmae_finalize, + .dma_error = mmci_dmae_error, +}; +#else +static struct mmci_host_ops mmci_variant_ops = { + .get_datactrl_cfg = mmci_get_dctrl_cfg, +}; +#endif + +static void mmci_variant_init(struct mmci_host *host) +{ + host->ops = &mmci_variant_ops; +} + +static void ux500_variant_init(struct mmci_host *host) +{ + host->ops = &mmci_variant_ops; + host->ops->busy_complete = ux500_busy_complete; +} + +static void ux500v2_variant_init(struct mmci_host *host) +{ + host->ops = &mmci_variant_ops; + host->ops->busy_complete = ux500_busy_complete; + host->ops->get_datactrl_cfg = ux500v2_get_dctrl_cfg; +} + +static void mmci_pre_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct mmci_host *host = mmc_priv(mmc); + struct mmc_data *data = mrq->data; + + if (!data) + return; + + WARN_ON(data->host_cookie); + + if (mmci_validate_data(host, data)) + return; + + mmci_prep_data(host, data, true); +} + +static void mmci_post_request(struct mmc_host *mmc, struct mmc_request *mrq, + int err) +{ + struct mmci_host *host = mmc_priv(mmc); + struct mmc_data *data = mrq->data; + + if (!data || !data->host_cookie) + return; + + mmci_unprep_data(host, data, err); +} + +static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) +{ + struct variant_data *variant = host->variant; + unsigned int datactrl, timeout, irqmask; + unsigned long long clks; + void __iomem *base; + + dev_dbg(mmc_dev(host->mmc), "blksz %04x blks %04x flags %08x\n", + data->blksz, data->blocks, data->flags); + + host->data = data; + host->size = data->blksz * data->blocks; + data->bytes_xfered = 0; + + clks = (unsigned long long)data->timeout_ns * host->cclk; + do_div(clks, NSEC_PER_SEC); + + timeout = data->timeout_clks + (unsigned int)clks; + + base = host->base; + writel(timeout, base + MMCIDATATIMER); + writel(host->size, base + MMCIDATALENGTH); + + datactrl = host->ops->get_datactrl_cfg(host); + datactrl |= host->data->flags & MMC_DATA_READ ? MCI_DPSM_DIRECTION : 0; + + if (host->mmc->card && mmc_card_sdio(host->mmc->card)) { + u32 clk; + + datactrl |= variant->datactrl_mask_sdio; + + /* + * The ST Micro variant for SDIO small write transfers + * needs to have clock H/W flow control disabled, + * otherwise the transfer will not start. The threshold + * depends on the rate of MCLK. + */ + if (variant->st_sdio && data->flags & MMC_DATA_WRITE && + (host->size < 8 || + (host->size <= 8 && host->mclk > 50000000))) + clk = host->clk_reg & ~variant->clkreg_enable; + else + clk = host->clk_reg | variant->clkreg_enable; + + mmci_write_clkreg(host, clk); + } + + if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50 || + host->mmc->ios.timing == MMC_TIMING_MMC_DDR52) + datactrl |= variant->datactrl_mask_ddrmode; + + /* + * Attempt to use DMA operation mode, if this + * should fail, fall back to PIO mode + */ + if (!mmci_dma_start(host, datactrl)) + return; + + /* IRQ mode, map the SG list for CPU reading/writing */ + mmci_init_sg(host, data); + + if (data->flags & MMC_DATA_READ) { + irqmask = MCI_RXFIFOHALFFULLMASK; + + /* + * If we have less than the fifo 'half-full' threshold to + * transfer, trigger a PIO interrupt as soon as any data + * is available. + */ + if (host->size < variant->fifohalfsize) + irqmask |= MCI_RXDATAAVLBLMASK; + } else { + /* + * We don't actually need to include "FIFO empty" here + * since its implicit in "FIFO half empty". + */ + irqmask = MCI_TXFIFOHALFEMPTYMASK; + } + + mmci_write_datactrlreg(host, datactrl); + writel(readl(base + MMCIMASK0) & ~MCI_DATAENDMASK, base + MMCIMASK0); + mmci_set_mask1(host, irqmask); +} + +static void +mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c) +{ + void __iomem *base = host->base; + unsigned long long clks; + + dev_dbg(mmc_dev(host->mmc), "op %02x arg %08x flags %08x\n", + cmd->opcode, cmd->arg, cmd->flags); + + if (readl(base + MMCICOMMAND) & host->variant->cmdreg_cpsm_enable) { + writel(0, base + MMCICOMMAND); + mmci_reg_delay(host); + } + + if (host->variant->cmdreg_stop && + cmd->opcode == MMC_STOP_TRANSMISSION) + c |= host->variant->cmdreg_stop; + + c |= cmd->opcode | host->variant->cmdreg_cpsm_enable; + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) + c |= host->variant->cmdreg_lrsp_crc; + else if (cmd->flags & MMC_RSP_CRC) + c |= host->variant->cmdreg_srsp_crc; + else + c |= host->variant->cmdreg_srsp; + } + + if (host->variant->busy_timeout && cmd->flags & MMC_RSP_BUSY) { + if (!cmd->busy_timeout) + cmd->busy_timeout = 10 * MSEC_PER_SEC; + + if (cmd->busy_timeout > host->mmc->max_busy_timeout) + clks = (unsigned long long)host->mmc->max_busy_timeout * host->cclk; + else + clks = (unsigned long long)cmd->busy_timeout * host->cclk; + + do_div(clks, MSEC_PER_SEC); + writel_relaxed(clks, host->base + MMCIDATATIMER); + } + + if (host->ops->pre_sig_volt_switch && cmd->opcode == SD_SWITCH_VOLTAGE) + host->ops->pre_sig_volt_switch(host); + + if (/*interrupt*/0) + c |= MCI_CPSM_INTERRUPT; + + if (mmc_cmd_type(cmd) == MMC_CMD_ADTC) + c |= host->variant->data_cmd_enable; + + host->cmd = cmd; + + writel(cmd->arg, base + MMCIARGUMENT); + writel(c, base + MMCICOMMAND); +} + +static void mmci_stop_command(struct mmci_host *host) +{ + host->stop_abort.error = 0; + mmci_start_command(host, &host->stop_abort, 0); +} + +static void +mmci_data_irq(struct mmci_host *host, struct mmc_data *data, + unsigned int status) +{ + unsigned int status_err; + + /* Make sure we have data to handle */ + if (!data) + return; + + /* First check for errors */ + status_err = status & (host->variant->start_err | + MCI_DATACRCFAIL | MCI_DATATIMEOUT | + MCI_TXUNDERRUN | MCI_RXOVERRUN); + + if (status_err) { + u32 remain, success; + + /* Terminate the DMA transfer */ + mmci_dma_error(host); + + /* + * Calculate how far we are into the transfer. Note that + * the data counter gives the number of bytes transferred + * on the MMC bus, not on the host side. On reads, this + * can be as much as a FIFO-worth of data ahead. This + * matters for FIFO overruns only. + */ + if (!host->variant->datacnt_useless) { + remain = readl(host->base + MMCIDATACNT); + success = data->blksz * data->blocks - remain; + } else { + success = 0; + } + + dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ, status 0x%08x at 0x%08x\n", + status_err, success); + if (status_err & MCI_DATACRCFAIL) { + /* Last block was not successful */ + success -= 1; + data->error = -EILSEQ; + } else if (status_err & MCI_DATATIMEOUT) { + data->error = -ETIMEDOUT; + } else if (status_err & MCI_STARTBITERR) { + data->error = -ECOMM; + } else if (status_err & MCI_TXUNDERRUN) { + data->error = -EIO; + } else if (status_err & MCI_RXOVERRUN) { + if (success > host->variant->fifosize) + success -= host->variant->fifosize; + else + success = 0; + data->error = -EIO; + } + data->bytes_xfered = round_down(success, data->blksz); + } + + if (status & MCI_DATABLOCKEND) + dev_err(mmc_dev(host->mmc), "stray MCI_DATABLOCKEND interrupt\n"); + + if (status & MCI_DATAEND || data->error) { + mmci_dma_finalize(host, data); + + mmci_stop_data(host); + + if (!data->error) + /* The error clause is handled above, success! */ + data->bytes_xfered = data->blksz * data->blocks; + + if (!data->stop) { + if (host->variant->cmdreg_stop && data->error) + mmci_stop_command(host); + else + mmci_request_end(host, data->mrq); + } else if (host->mrq->sbc && !data->error) { + mmci_request_end(host, data->mrq); + } else { + mmci_start_command(host, data->stop, 0); + } + } +} + +static void +mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, + unsigned int status) +{ + u32 err_msk = MCI_CMDCRCFAIL | MCI_CMDTIMEOUT; + void __iomem *base = host->base; + bool sbc, busy_resp; + + if (!cmd) + return; + + sbc = (cmd == host->mrq->sbc); + busy_resp = !!(cmd->flags & MMC_RSP_BUSY); + + /* + * We need to be one of these interrupts to be considered worth + * handling. Note that we tag on any latent IRQs postponed + * due to waiting for busy status. + */ + if (host->variant->busy_timeout && busy_resp) + err_msk |= MCI_DATATIMEOUT; + + if (!((status | host->busy_status) & + (err_msk | MCI_CMDSENT | MCI_CMDRESPEND))) + return; + + /* Handle busy detection on DAT0 if the variant supports it. */ + if (busy_resp && host->variant->busy_detect) + if (!host->ops->busy_complete(host, status, err_msk)) + return; + + host->cmd = NULL; + + if (status & MCI_CMDTIMEOUT) { + cmd->error = -ETIMEDOUT; + } else if (status & MCI_CMDCRCFAIL && cmd->flags & MMC_RSP_CRC) { + cmd->error = -EILSEQ; + } else if (host->variant->busy_timeout && busy_resp && + status & MCI_DATATIMEOUT) { + cmd->error = -ETIMEDOUT; + /* + * This will wake up mmci_irq_thread() which will issue + * a hardware reset of the MMCI block. + */ + host->irq_action = IRQ_WAKE_THREAD; + } else { + cmd->resp[0] = readl(base + MMCIRESPONSE0); + cmd->resp[1] = readl(base + MMCIRESPONSE1); + cmd->resp[2] = readl(base + MMCIRESPONSE2); + cmd->resp[3] = readl(base + MMCIRESPONSE3); + } + + if ((!sbc && !cmd->data) || cmd->error) { + if (host->data) { + /* Terminate the DMA transfer */ + mmci_dma_error(host); + + mmci_stop_data(host); + if (host->variant->cmdreg_stop && cmd->error) { + mmci_stop_command(host); + return; + } + } + + if (host->irq_action != IRQ_WAKE_THREAD) + mmci_request_end(host, host->mrq); + + } else if (sbc) { + mmci_start_command(host, host->mrq->cmd, 0); + } else if (!host->variant->datactrl_first && + !(cmd->data->flags & MMC_DATA_READ)) { + mmci_start_data(host, cmd->data); + } +} + +static int mmci_get_rx_fifocnt(struct mmci_host *host, u32 status, int remain) +{ + return remain - (readl(host->base + MMCIFIFOCNT) << 2); +} + +static int mmci_qcom_get_rx_fifocnt(struct mmci_host *host, u32 status, int r) +{ + /* + * on qcom SDCC4 only 8 words are used in each burst so only 8 addresses + * from the fifo range should be used + */ + if (status & MCI_RXFIFOHALFFULL) + return host->variant->fifohalfsize; + else if (status & MCI_RXDATAAVLBL) + return 4; + + return 0; +} + +static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int remain) +{ + void __iomem *base = host->base; + char *ptr = buffer; + u32 status = readl(host->base + MMCISTATUS); + int host_remain = host->size; + + do { + int count = host->get_rx_fifocnt(host, status, host_remain); + + if (count > remain) + count = remain; + + if (count <= 0) + break; + + /* + * SDIO especially may want to send something that is + * not divisible by 4 (as opposed to card sectors + * etc). Therefore make sure to always read the last bytes + * while only doing full 32-bit reads towards the FIFO. + */ + if (unlikely(count & 0x3)) { + if (count < 4) { + unsigned char buf[4]; + ioread32_rep(base + MMCIFIFO, buf, 1); + memcpy(ptr, buf, count); + } else { + ioread32_rep(base + MMCIFIFO, ptr, count >> 2); + count &= ~0x3; + } + } else { + ioread32_rep(base + MMCIFIFO, ptr, count >> 2); + } + + ptr += count; + remain -= count; + host_remain -= count; + + if (remain == 0) + break; + + status = readl(base + MMCISTATUS); + } while (status & MCI_RXDATAAVLBL); + + return ptr - buffer; +} + +static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int remain, u32 status) +{ + struct variant_data *variant = host->variant; + void __iomem *base = host->base; + char *ptr = buffer; + + do { + unsigned int count, maxcnt; + + maxcnt = status & MCI_TXFIFOEMPTY ? + variant->fifosize : variant->fifohalfsize; + count = min(remain, maxcnt); + + /* + * SDIO especially may want to send something that is + * not divisible by 4 (as opposed to card sectors + * etc), and the FIFO only accept full 32-bit writes. + * So compensate by adding +3 on the count, a single + * byte become a 32bit write, 7 bytes will be two + * 32bit writes etc. + */ + iowrite32_rep(base + MMCIFIFO, ptr, (count + 3) >> 2); + + ptr += count; + remain -= count; + + if (remain == 0) + break; + + status = readl(base + MMCISTATUS); + } while (status & MCI_TXFIFOHALFEMPTY); + + return ptr - buffer; +} + +/* + * PIO data transfer IRQ handler. + */ +static irqreturn_t mmci_pio_irq(int irq, void *dev_id) +{ + struct mmci_host *host = dev_id; + struct sg_mapping_iter *sg_miter = &host->sg_miter; + struct variant_data *variant = host->variant; + void __iomem *base = host->base; + u32 status; + + status = readl(base + MMCISTATUS); + + dev_dbg(mmc_dev(host->mmc), "irq1 (pio) %08x\n", status); + + do { + unsigned int remain, len; + char *buffer; + + /* + * For write, we only need to test the half-empty flag + * here - if the FIFO is completely empty, then by + * definition it is more than half empty. + * + * For read, check for data available. + */ + if (!(status & (MCI_TXFIFOHALFEMPTY|MCI_RXDATAAVLBL))) + break; + + if (!sg_miter_next(sg_miter)) + break; + + buffer = sg_miter->addr; + remain = sg_miter->length; + + len = 0; + if (status & MCI_RXACTIVE) + len = mmci_pio_read(host, buffer, remain); + if (status & MCI_TXACTIVE) + len = mmci_pio_write(host, buffer, remain, status); + + sg_miter->consumed = len; + + host->size -= len; + remain -= len; + + if (remain) + break; + + status = readl(base + MMCISTATUS); + } while (1); + + sg_miter_stop(sg_miter); + + /* + * If we have less than the fifo 'half-full' threshold to transfer, + * trigger a PIO interrupt as soon as any data is available. + */ + if (status & MCI_RXACTIVE && host->size < variant->fifohalfsize) + mmci_set_mask1(host, MCI_RXDATAAVLBLMASK); + + /* + * If we run out of data, disable the data IRQs; this + * prevents a race where the FIFO becomes empty before + * the chip itself has disabled the data path, and + * stops us racing with our data end IRQ. + */ + if (host->size == 0) { + mmci_set_mask1(host, 0); + writel(readl(base + MMCIMASK0) | MCI_DATAENDMASK, base + MMCIMASK0); + } + + return IRQ_HANDLED; +} + +/* + * Handle completion of command and data transfers. + */ +static irqreturn_t mmci_irq(int irq, void *dev_id) +{ + struct mmci_host *host = dev_id; + u32 status; + + spin_lock(&host->lock); + host->irq_action = IRQ_HANDLED; + + do { + status = readl(host->base + MMCISTATUS); + if (!status) + break; + + if (host->singleirq) { + if (status & host->mask1_reg) + mmci_pio_irq(irq, dev_id); + + status &= ~host->variant->irq_pio_mask; + } + + /* + * Busy detection is managed by mmci_cmd_irq(), including to + * clear the corresponding IRQ. + */ + status &= readl(host->base + MMCIMASK0); + if (host->variant->busy_detect) + writel(status & ~host->variant->busy_detect_mask, + host->base + MMCICLEAR); + else + writel(status, host->base + MMCICLEAR); + + dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status); + + if (host->variant->reversed_irq_handling) { + mmci_data_irq(host, host->data, status); + mmci_cmd_irq(host, host->cmd, status); + } else { + mmci_cmd_irq(host, host->cmd, status); + mmci_data_irq(host, host->data, status); + } + + /* + * Busy detection has been handled by mmci_cmd_irq() above. + * Clear the status bit to prevent polling in IRQ context. + */ + if (host->variant->busy_detect_flag) + status &= ~host->variant->busy_detect_flag; + + } while (status); + + spin_unlock(&host->lock); + + return host->irq_action; +} + +/* + * mmci_irq_thread() - A threaded IRQ handler that manages a reset of the HW. + * + * A reset is needed for some variants, where a datatimeout for a R1B request + * causes the DPSM to stay busy (non-functional). + */ +static irqreturn_t mmci_irq_thread(int irq, void *dev_id) +{ + struct mmci_host *host = dev_id; + unsigned long flags; + + if (host->rst) { + reset_control_assert(host->rst); + udelay(2); + reset_control_deassert(host->rst); + } + + spin_lock_irqsave(&host->lock, flags); + writel(host->clk_reg, host->base + MMCICLOCK); + writel(host->pwr_reg, host->base + MMCIPOWER); + writel(MCI_IRQENABLE | host->variant->start_err, + host->base + MMCIMASK0); + + host->irq_action = IRQ_HANDLED; + mmci_request_end(host, host->mrq); + spin_unlock_irqrestore(&host->lock, flags); + + return host->irq_action; +} + +static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct mmci_host *host = mmc_priv(mmc); + unsigned long flags; + + WARN_ON(host->mrq != NULL); + + mrq->cmd->error = mmci_validate_data(host, mrq->data); + if (mrq->cmd->error) { + mmc_request_done(mmc, mrq); + return; + } + + spin_lock_irqsave(&host->lock, flags); + + host->mrq = mrq; + + if (mrq->data) + mmci_get_next_data(host, mrq->data); + + if (mrq->data && + (host->variant->datactrl_first || mrq->data->flags & MMC_DATA_READ)) + mmci_start_data(host, mrq->data); + + if (mrq->sbc) + mmci_start_command(host, mrq->sbc, 0); + else + mmci_start_command(host, mrq->cmd, 0); + + spin_unlock_irqrestore(&host->lock, flags); +} + +static void mmci_set_max_busy_timeout(struct mmc_host *mmc) +{ + struct mmci_host *host = mmc_priv(mmc); + u32 max_busy_timeout = 0; + + if (!host->variant->busy_detect) + return; + + if (host->variant->busy_timeout && mmc->actual_clock) + max_busy_timeout = U32_MAX / DIV_ROUND_UP(mmc->actual_clock, + MSEC_PER_SEC); + + mmc->max_busy_timeout = max_busy_timeout; +} + +static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct mmci_host *host = mmc_priv(mmc); + struct variant_data *variant = host->variant; + u32 pwr = 0; + unsigned long flags; + int ret; + + switch (ios->power_mode) { + case MMC_POWER_OFF: + if (!IS_ERR(mmc->supply.vmmc)) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); + + if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) { + regulator_disable(mmc->supply.vqmmc); + host->vqmmc_enabled = false; + } + + break; + case MMC_POWER_UP: + if (!IS_ERR(mmc->supply.vmmc)) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd); + + /* + * The ST Micro variant doesn't have the PL180s MCI_PWR_UP + * and instead uses MCI_PWR_ON so apply whatever value is + * configured in the variant data. + */ + pwr |= variant->pwrreg_powerup; + + break; + case MMC_POWER_ON: + if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) { + ret = regulator_enable(mmc->supply.vqmmc); + if (ret < 0) + dev_err(mmc_dev(mmc), + "failed to enable vqmmc regulator\n"); + else + host->vqmmc_enabled = true; + } + + pwr |= MCI_PWR_ON; + break; + } + + if (variant->signal_direction && ios->power_mode != MMC_POWER_OFF) { + /* + * The ST Micro variant has some additional bits + * indicating signal direction for the signals in + * the SD/MMC bus and feedback-clock usage. + */ + pwr |= host->pwr_reg_add; + + if (ios->bus_width == MMC_BUS_WIDTH_4) + pwr &= ~MCI_ST_DATA74DIREN; + else if (ios->bus_width == MMC_BUS_WIDTH_1) + pwr &= (~MCI_ST_DATA74DIREN & + ~MCI_ST_DATA31DIREN & + ~MCI_ST_DATA2DIREN); + } + + if (variant->opendrain) { + if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) + pwr |= variant->opendrain; + } else { + /* + * If the variant cannot configure the pads by its own, then we + * expect the pinctrl to be able to do that for us + */ + if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) + pinctrl_select_state(host->pinctrl, host->pins_opendrain); + else + pinctrl_select_default_state(mmc_dev(mmc)); + } + + /* + * If clock = 0 and the variant requires the MMCIPOWER to be used for + * gating the clock, the MCI_PWR_ON bit is cleared. + */ + if (!ios->clock && variant->pwrreg_clkgate) + pwr &= ~MCI_PWR_ON; + + if (host->variant->explicit_mclk_control && + ios->clock != host->clock_cache) { + ret = clk_set_rate(host->clk, ios->clock); + if (ret < 0) + dev_err(mmc_dev(host->mmc), + "Error setting clock rate (%d)\n", ret); + else + host->mclk = clk_get_rate(host->clk); + } + host->clock_cache = ios->clock; + + spin_lock_irqsave(&host->lock, flags); + + if (host->ops && host->ops->set_clkreg) + host->ops->set_clkreg(host, ios->clock); + else + mmci_set_clkreg(host, ios->clock); + + mmci_set_max_busy_timeout(mmc); + + if (host->ops && host->ops->set_pwrreg) + host->ops->set_pwrreg(host, pwr); + else + mmci_write_pwrreg(host, pwr); + + mmci_reg_delay(host); + + spin_unlock_irqrestore(&host->lock, flags); +} + +static int mmci_get_cd(struct mmc_host *mmc) +{ + struct mmci_host *host = mmc_priv(mmc); + struct mmci_platform_data *plat = host->plat; + unsigned int status = mmc_gpio_get_cd(mmc); + + if (status == -ENOSYS) { + if (!plat->status) + return 1; /* Assume always present */ + + status = plat->status(mmc_dev(host->mmc)); + } + return status; +} + +static int mmci_sig_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct mmci_host *host = mmc_priv(mmc); + int ret; + + ret = mmc_regulator_set_vqmmc(mmc, ios); + + if (!ret && host->ops && host->ops->post_sig_volt_switch) + ret = host->ops->post_sig_volt_switch(host, ios); + else if (ret) + ret = 0; + + if (ret < 0) + dev_warn(mmc_dev(mmc), "Voltage switch failed\n"); + + return ret; +} + +static struct mmc_host_ops mmci_ops = { + .request = mmci_request, + .pre_req = mmci_pre_request, + .post_req = mmci_post_request, + .set_ios = mmci_set_ios, + .get_ro = mmc_gpio_get_ro, + .get_cd = mmci_get_cd, + .start_signal_voltage_switch = mmci_sig_volt_switch, +}; + +static void mmci_probe_level_translator(struct mmc_host *mmc) +{ + struct device *dev = mmc_dev(mmc); + struct mmci_host *host = mmc_priv(mmc); + struct gpio_desc *cmd_gpio; + struct gpio_desc *ck_gpio; + struct gpio_desc *ckin_gpio; + int clk_hi, clk_lo; + + /* + * Assume the level translator is present if st,use-ckin is set. + * This is to cater for DTs which do not implement this test. + */ + host->clk_reg_add |= MCI_STM32_CLK_SELCKIN; + + cmd_gpio = gpiod_get(dev, "st,cmd", GPIOD_OUT_HIGH); + if (IS_ERR(cmd_gpio)) + goto exit_cmd; + + ck_gpio = gpiod_get(dev, "st,ck", GPIOD_OUT_HIGH); + if (IS_ERR(ck_gpio)) + goto exit_ck; + + ckin_gpio = gpiod_get(dev, "st,ckin", GPIOD_IN); + if (IS_ERR(ckin_gpio)) + goto exit_ckin; + + /* All GPIOs are valid, test whether level translator works */ + + /* Sample CKIN */ + clk_hi = !!gpiod_get_value(ckin_gpio); + + /* Set CK low */ + gpiod_set_value(ck_gpio, 0); + + /* Sample CKIN */ + clk_lo = !!gpiod_get_value(ckin_gpio); + + /* Tristate all */ + gpiod_direction_input(cmd_gpio); + gpiod_direction_input(ck_gpio); + + /* Level translator is present if CK signal is propagated to CKIN */ + if (!clk_hi || clk_lo) { + host->clk_reg_add &= ~MCI_STM32_CLK_SELCKIN; + dev_warn(dev, + "Level translator inoperable, CK signal not detected on CKIN, disabling.\n"); + } + + gpiod_put(ckin_gpio); + +exit_ckin: + gpiod_put(ck_gpio); +exit_ck: + gpiod_put(cmd_gpio); +exit_cmd: + pinctrl_select_default_state(dev); +} + +static int mmci_of_parse(struct device_node *np, struct mmc_host *mmc) +{ + struct mmci_host *host = mmc_priv(mmc); + int ret = mmc_of_parse(mmc); + + if (ret) + return ret; + + if (of_get_property(np, "st,sig-dir-dat0", NULL)) + host->pwr_reg_add |= MCI_ST_DATA0DIREN; + if (of_get_property(np, "st,sig-dir-dat2", NULL)) + host->pwr_reg_add |= MCI_ST_DATA2DIREN; + if (of_get_property(np, "st,sig-dir-dat31", NULL)) + host->pwr_reg_add |= MCI_ST_DATA31DIREN; + if (of_get_property(np, "st,sig-dir-dat74", NULL)) + host->pwr_reg_add |= MCI_ST_DATA74DIREN; + if (of_get_property(np, "st,sig-dir-cmd", NULL)) + host->pwr_reg_add |= MCI_ST_CMDDIREN; + if (of_get_property(np, "st,sig-pin-fbclk", NULL)) + host->pwr_reg_add |= MCI_ST_FBCLKEN; + if (of_get_property(np, "st,sig-dir", NULL)) + host->pwr_reg_add |= MCI_STM32_DIRPOL; + if (of_get_property(np, "st,neg-edge", NULL)) + host->clk_reg_add |= MCI_STM32_CLK_NEGEDGE; + if (of_get_property(np, "st,use-ckin", NULL)) + mmci_probe_level_translator(mmc); + + if (of_get_property(np, "mmc-cap-mmc-highspeed", NULL)) + mmc->caps |= MMC_CAP_MMC_HIGHSPEED; + if (of_get_property(np, "mmc-cap-sd-highspeed", NULL)) + mmc->caps |= MMC_CAP_SD_HIGHSPEED; + + return 0; +} + +static int mmci_probe(struct amba_device *dev, + const struct amba_id *id) +{ + struct mmci_platform_data *plat = dev->dev.platform_data; + struct device_node *np = dev->dev.of_node; + struct variant_data *variant = id->data; + struct mmci_host *host; + struct mmc_host *mmc; + int ret; + + /* Must have platform data or Device Tree. */ + if (!plat && !np) { + dev_err(&dev->dev, "No plat data or DT found\n"); + return -EINVAL; + } + + if (!plat) { + plat = devm_kzalloc(&dev->dev, sizeof(*plat), GFP_KERNEL); + if (!plat) + return -ENOMEM; + } + + mmc = mmc_alloc_host(sizeof(struct mmci_host), &dev->dev); + if (!mmc) + return -ENOMEM; + + host = mmc_priv(mmc); + host->mmc = mmc; + host->mmc_ops = &mmci_ops; + mmc->ops = &mmci_ops; + + ret = mmci_of_parse(np, mmc); + if (ret) + goto host_free; + + /* + * Some variant (STM32) doesn't have opendrain bit, nevertheless + * pins can be set accordingly using pinctrl + */ + if (!variant->opendrain) { + host->pinctrl = devm_pinctrl_get(&dev->dev); + if (IS_ERR(host->pinctrl)) { + dev_err(&dev->dev, "failed to get pinctrl"); + ret = PTR_ERR(host->pinctrl); + goto host_free; + } + + host->pins_opendrain = pinctrl_lookup_state(host->pinctrl, + MMCI_PINCTRL_STATE_OPENDRAIN); + if (IS_ERR(host->pins_opendrain)) { + dev_err(mmc_dev(mmc), "Can't select opendrain pins\n"); + ret = PTR_ERR(host->pins_opendrain); + goto host_free; + } + } + + host->hw_designer = amba_manf(dev); + host->hw_revision = amba_rev(dev); + dev_dbg(mmc_dev(mmc), "designer ID = 0x%02x\n", host->hw_designer); + dev_dbg(mmc_dev(mmc), "revision = 0x%01x\n", host->hw_revision); + + host->clk = devm_clk_get(&dev->dev, NULL); + if (IS_ERR(host->clk)) { + ret = PTR_ERR(host->clk); + goto host_free; + } + + ret = clk_prepare_enable(host->clk); + if (ret) + goto host_free; + + if (variant->qcom_fifo) + host->get_rx_fifocnt = mmci_qcom_get_rx_fifocnt; + else + host->get_rx_fifocnt = mmci_get_rx_fifocnt; + + host->plat = plat; + host->variant = variant; + host->mclk = clk_get_rate(host->clk); + /* + * According to the spec, mclk is max 100 MHz, + * so we try to adjust the clock down to this, + * (if possible). + */ + if (host->mclk > variant->f_max) { + ret = clk_set_rate(host->clk, variant->f_max); + if (ret < 0) + goto clk_disable; + host->mclk = clk_get_rate(host->clk); + dev_dbg(mmc_dev(mmc), "eventual mclk rate: %u Hz\n", + host->mclk); + } + + host->phybase = dev->res.start; + host->base = devm_ioremap_resource(&dev->dev, &dev->res); + if (IS_ERR(host->base)) { + ret = PTR_ERR(host->base); + goto clk_disable; + } + + if (variant->init) + variant->init(host); + + /* + * The ARM and ST versions of the block have slightly different + * clock divider equations which means that the minimum divider + * differs too. + * on Qualcomm like controllers get the nearest minimum clock to 100Khz + */ + if (variant->st_clkdiv) + mmc->f_min = DIV_ROUND_UP(host->mclk, 257); + else if (variant->stm32_clkdiv) + mmc->f_min = DIV_ROUND_UP(host->mclk, 2046); + else if (variant->explicit_mclk_control) + mmc->f_min = clk_round_rate(host->clk, 100000); + else + mmc->f_min = DIV_ROUND_UP(host->mclk, 512); + /* + * If no maximum operating frequency is supplied, fall back to use + * the module parameter, which has a (low) default value in case it + * is not specified. Either value must not exceed the clock rate into + * the block, of course. + */ + if (mmc->f_max) + mmc->f_max = variant->explicit_mclk_control ? + min(variant->f_max, mmc->f_max) : + min(host->mclk, mmc->f_max); + else + mmc->f_max = variant->explicit_mclk_control ? + fmax : min(host->mclk, fmax); + + + dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max); + + host->rst = devm_reset_control_get_optional_exclusive(&dev->dev, NULL); + if (IS_ERR(host->rst)) { + ret = PTR_ERR(host->rst); + goto clk_disable; + } + ret = reset_control_deassert(host->rst); + if (ret) + dev_err(mmc_dev(mmc), "failed to de-assert reset\n"); + + /* Get regulators and the supported OCR mask */ + ret = mmc_regulator_get_supply(mmc); + if (ret) + goto clk_disable; + + if (!mmc->ocr_avail) + mmc->ocr_avail = plat->ocr_mask; + else if (plat->ocr_mask) + dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n"); + + /* We support these capabilities. */ + mmc->caps |= MMC_CAP_CMD23; + + /* + * Enable busy detection. + */ + if (variant->busy_detect) { + mmci_ops.card_busy = mmci_card_busy; + /* + * Not all variants have a flag to enable busy detection + * in the DPSM, but if they do, set it here. + */ + if (variant->busy_dpsm_flag) + mmci_write_datactrlreg(host, + host->variant->busy_dpsm_flag); + mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY; + } + + /* Variants with mandatory busy timeout in HW needs R1B responses. */ + if (variant->busy_timeout) + mmc->caps |= MMC_CAP_NEED_RSP_BUSY; + + /* Prepare a CMD12 - needed to clear the DPSM on some variants. */ + host->stop_abort.opcode = MMC_STOP_TRANSMISSION; + host->stop_abort.arg = 0; + host->stop_abort.flags = MMC_RSP_R1B | MMC_CMD_AC; + + /* We support these PM capabilities. */ + mmc->pm_caps |= MMC_PM_KEEP_POWER; + + /* + * We can do SGIO + */ + mmc->max_segs = NR_SG; + + /* + * Since only a certain number of bits are valid in the data length + * register, we must ensure that we don't exceed 2^num-1 bytes in a + * single request. + */ + mmc->max_req_size = (1 << variant->datalength_bits) - 1; + + /* + * Set the maximum segment size. Since we aren't doing DMA + * (yet) we are only limited by the data length register. + */ + mmc->max_seg_size = mmc->max_req_size; + + /* + * Block size can be up to 2048 bytes, but must be a power of two. + */ + mmc->max_blk_size = 1 << variant->datactrl_blocksz; + + /* + * Limit the number of blocks transferred so that we don't overflow + * the maximum request size. + */ + mmc->max_blk_count = mmc->max_req_size >> variant->datactrl_blocksz; + + spin_lock_init(&host->lock); + + writel(0, host->base + MMCIMASK0); + + if (variant->mmcimask1) + writel(0, host->base + MMCIMASK1); + + writel(0xfff, host->base + MMCICLEAR); + + /* + * If: + * - not using DT but using a descriptor table, or + * - using a table of descriptors ALONGSIDE DT, or + * look up these descriptors named "cd" and "wp" right here, fail + * silently of these do not exist + */ + if (!np) { + ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0); + if (ret == -EPROBE_DEFER) + goto clk_disable; + + ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0); + if (ret == -EPROBE_DEFER) + goto clk_disable; + } + + ret = devm_request_threaded_irq(&dev->dev, dev->irq[0], mmci_irq, + mmci_irq_thread, IRQF_SHARED, + DRIVER_NAME " (cmd)", host); + if (ret) + goto clk_disable; + + if (!dev->irq[1]) + host->singleirq = true; + else { + ret = devm_request_irq(&dev->dev, dev->irq[1], mmci_pio_irq, + IRQF_SHARED, DRIVER_NAME " (pio)", host); + if (ret) + goto clk_disable; + } + + writel(MCI_IRQENABLE | variant->start_err, host->base + MMCIMASK0); + + amba_set_drvdata(dev, mmc); + + dev_info(&dev->dev, "%s: PL%03x manf %x rev%u at 0x%08llx irq %d,%d (pio)\n", + mmc_hostname(mmc), amba_part(dev), amba_manf(dev), + amba_rev(dev), (unsigned long long)dev->res.start, + dev->irq[0], dev->irq[1]); + + mmci_dma_setup(host); + + pm_runtime_set_autosuspend_delay(&dev->dev, 50); + pm_runtime_use_autosuspend(&dev->dev); + + ret = mmc_add_host(mmc); + if (ret) + goto clk_disable; + + pm_runtime_put(&dev->dev); + return 0; + + clk_disable: + clk_disable_unprepare(host->clk); + host_free: + mmc_free_host(mmc); + return ret; +} + +static void mmci_remove(struct amba_device *dev) +{ + struct mmc_host *mmc = amba_get_drvdata(dev); + + if (mmc) { + struct mmci_host *host = mmc_priv(mmc); + struct variant_data *variant = host->variant; + + /* + * Undo pm_runtime_put() in probe. We use the _sync + * version here so that we can access the primecell. + */ + pm_runtime_get_sync(&dev->dev); + + mmc_remove_host(mmc); + + writel(0, host->base + MMCIMASK0); + + if (variant->mmcimask1) + writel(0, host->base + MMCIMASK1); + + writel(0, host->base + MMCICOMMAND); + writel(0, host->base + MMCIDATACTRL); + + mmci_dma_release(host); + clk_disable_unprepare(host->clk); + mmc_free_host(mmc); + } +} + +#ifdef CONFIG_PM +static void mmci_save(struct mmci_host *host) +{ + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + writel(0, host->base + MMCIMASK0); + if (host->variant->pwrreg_nopower) { + writel(0, host->base + MMCIDATACTRL); + writel(0, host->base + MMCIPOWER); + writel(0, host->base + MMCICLOCK); + } + mmci_reg_delay(host); + + spin_unlock_irqrestore(&host->lock, flags); +} + +static void mmci_restore(struct mmci_host *host) +{ + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + + if (host->variant->pwrreg_nopower) { + writel(host->clk_reg, host->base + MMCICLOCK); + writel(host->datactrl_reg, host->base + MMCIDATACTRL); + writel(host->pwr_reg, host->base + MMCIPOWER); + } + writel(MCI_IRQENABLE | host->variant->start_err, + host->base + MMCIMASK0); + mmci_reg_delay(host); + + spin_unlock_irqrestore(&host->lock, flags); +} + +static int mmci_runtime_suspend(struct device *dev) +{ + struct amba_device *adev = to_amba_device(dev); + struct mmc_host *mmc = amba_get_drvdata(adev); + + if (mmc) { + struct mmci_host *host = mmc_priv(mmc); + pinctrl_pm_select_sleep_state(dev); + mmci_save(host); + clk_disable_unprepare(host->clk); + } + + return 0; +} + +static int mmci_runtime_resume(struct device *dev) +{ + struct amba_device *adev = to_amba_device(dev); + struct mmc_host *mmc = amba_get_drvdata(adev); + + if (mmc) { + struct mmci_host *host = mmc_priv(mmc); + clk_prepare_enable(host->clk); + mmci_restore(host); + pinctrl_select_default_state(dev); + } + + return 0; +} +#endif + +static const struct dev_pm_ops mmci_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(mmci_runtime_suspend, mmci_runtime_resume, NULL) +}; + +static const struct amba_id mmci_ids[] = { + { + .id = 0x00041180, + .mask = 0xff0fffff, + .data = &variant_arm, + }, + { + .id = 0x01041180, + .mask = 0xff0fffff, + .data = &variant_arm_extended_fifo, + }, + { + .id = 0x02041180, + .mask = 0xff0fffff, + .data = &variant_arm_extended_fifo_hwfc, + }, + { + .id = 0x00041181, + .mask = 0x000fffff, + .data = &variant_arm, + }, + /* ST Micro variants */ + { + .id = 0x00180180, + .mask = 0x00ffffff, + .data = &variant_u300, + }, + { + .id = 0x10180180, + .mask = 0xf0ffffff, + .data = &variant_nomadik, + }, + { + .id = 0x00280180, + .mask = 0x00ffffff, + .data = &variant_nomadik, + }, + { + .id = 0x00480180, + .mask = 0xf0ffffff, + .data = &variant_ux500, + }, + { + .id = 0x10480180, + .mask = 0xf0ffffff, + .data = &variant_ux500v2, + }, + { + .id = 0x00880180, + .mask = 0x00ffffff, + .data = &variant_stm32, + }, + { + .id = 0x10153180, + .mask = 0xf0ffffff, + .data = &variant_stm32_sdmmc, + }, + { + .id = 0x00253180, + .mask = 0xf0ffffff, + .data = &variant_stm32_sdmmcv2, + }, + { + .id = 0x20253180, + .mask = 0xf0ffffff, + .data = &variant_stm32_sdmmcv2, + }, + /* Qualcomm variants */ + { + .id = 0x00051180, + .mask = 0x000fffff, + .data = &variant_qcom, + }, + { 0, 0 }, +}; + +MODULE_DEVICE_TABLE(amba, mmci_ids); + +static struct amba_driver mmci_driver = { + .drv = { + .name = DRIVER_NAME, + .pm = &mmci_dev_pm_ops, + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, + .probe = mmci_probe, + .remove = mmci_remove, + .id_table = mmci_ids, +}; + +module_amba_driver(mmci_driver); + +module_param(fmax, uint, 0444); + +MODULE_DESCRIPTION("ARM PrimeCell PL180/181 Multimedia Card Interface driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3