From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/mmc/host/sdhci-s3c.c | 793 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 793 insertions(+) create mode 100644 drivers/mmc/host/sdhci-s3c.c (limited to 'drivers/mmc/host/sdhci-s3c.c') diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c new file mode 100644 index 000000000..9085f3932 --- /dev/null +++ b/drivers/mmc/host/sdhci-s3c.c @@ -0,0 +1,793 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* linux/drivers/mmc/host/sdhci-s3c.c + * + * Copyright 2008 Openmoko Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * SDHCI (HSMMC) support for Samsung SoC + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "sdhci.h" + +#define MAX_BUS_CLK (4) + +#define S3C_SDHCI_CONTROL2 (0x80) +#define S3C_SDHCI_CONTROL3 (0x84) +#define S3C64XX_SDHCI_CONTROL4 (0x8C) + +#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR BIT(31) +#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK BIT(30) +#define S3C_SDHCI_CTRL2_CDINVRXD3 BIT(29) +#define S3C_SDHCI_CTRL2_SLCARDOUT BIT(28) + +#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24) +#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT (24) +#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24) + +#define S3C_SDHCI_CTRL2_LVLDAT_MASK (0xff << 16) +#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT (16) +#define S3C_SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16) + +#define S3C_SDHCI_CTRL2_ENFBCLKTX BIT(15) +#define S3C_SDHCI_CTRL2_ENFBCLKRX BIT(14) +#define S3C_SDHCI_CTRL2_SDCDSEL BIT(13) +#define S3C_SDHCI_CTRL2_SDSIGPC BIT(12) +#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART BIT(11) + +#define S3C_SDHCI_CTRL2_DFCNT_MASK (0x3 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_SHIFT (9) +#define S3C_SDHCI_CTRL2_DFCNT_NONE (0x0 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK (0x1 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK (0x2 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK (0x3 << 9) + +#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD BIT(8) +#define S3C_SDHCI_CTRL2_RWAITMODE BIT(7) +#define S3C_SDHCI_CTRL2_DISBUFRD BIT(6) + +#define S3C_SDHCI_CTRL2_SELBASECLK_MASK (0x3 << 4) +#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT (4) +#define S3C_SDHCI_CTRL2_PWRSYNC BIT(3) +#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON BIT(1) +#define S3C_SDHCI_CTRL2_HWINITFIN BIT(0) + +#define S3C_SDHCI_CTRL3_FCSEL3 BIT(31) +#define S3C_SDHCI_CTRL3_FCSEL2 BIT(23) +#define S3C_SDHCI_CTRL3_FCSEL1 BIT(15) +#define S3C_SDHCI_CTRL3_FCSEL0 BIT(7) + +#define S3C_SDHCI_CTRL3_FIA3_MASK (0x7f << 24) +#define S3C_SDHCI_CTRL3_FIA3_SHIFT (24) +#define S3C_SDHCI_CTRL3_FIA3(_x) ((_x) << 24) + +#define S3C_SDHCI_CTRL3_FIA2_MASK (0x7f << 16) +#define S3C_SDHCI_CTRL3_FIA2_SHIFT (16) +#define S3C_SDHCI_CTRL3_FIA2(_x) ((_x) << 16) + +#define S3C_SDHCI_CTRL3_FIA1_MASK (0x7f << 8) +#define S3C_SDHCI_CTRL3_FIA1_SHIFT (8) +#define S3C_SDHCI_CTRL3_FIA1(_x) ((_x) << 8) + +#define S3C_SDHCI_CTRL3_FIA0_MASK (0x7f << 0) +#define S3C_SDHCI_CTRL3_FIA0_SHIFT (0) +#define S3C_SDHCI_CTRL3_FIA0(_x) ((_x) << 0) + +#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK (0x3 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT (16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA (0x0 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA (0x1 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA (0x2 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA (0x3 << 16) + +#define S3C64XX_SDHCI_CONTROL4_BUSY (1) + +/** + * struct sdhci_s3c - S3C SDHCI instance + * @host: The SDHCI host created + * @pdev: The platform device we where created from. + * @ioarea: The resource created when we claimed the IO area. + * @pdata: The platform data for this controller. + * @cur_clk: The index of the current bus clock. + * @ext_cd_irq: External card detect interrupt. + * @clk_io: The clock for the internal bus interface. + * @clk_rates: Clock frequencies. + * @clk_bus: The clocks that are available for the SD/MMC bus clock. + * @no_divider: No or non-standard internal clock divider. + */ +struct sdhci_s3c { + struct sdhci_host *host; + struct platform_device *pdev; + struct resource *ioarea; + struct s3c_sdhci_platdata *pdata; + int cur_clk; + int ext_cd_irq; + + struct clk *clk_io; + struct clk *clk_bus[MAX_BUS_CLK]; + unsigned long clk_rates[MAX_BUS_CLK]; + + bool no_divider; +}; + +/** + * struct sdhci_s3c_drv_data - S3C SDHCI platform specific driver data + * @sdhci_quirks: sdhci host specific quirks. + * @no_divider: no or non-standard internal clock divider. + * + * Specifies platform specific configuration of sdhci controller. + * Note: A structure for driver specific platform data is used for future + * expansion of its usage. + */ +struct sdhci_s3c_drv_data { + unsigned int sdhci_quirks; + bool no_divider; +}; + +static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host) +{ + return sdhci_priv(host); +} + +/** + * sdhci_s3c_get_max_clk - callback to get maximum clock frequency. + * @host: The SDHCI host instance. + * + * Callback to return the maximum clock rate acheivable by the controller. +*/ +static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host) +{ + struct sdhci_s3c *ourhost = to_s3c(host); + unsigned long rate, max = 0; + int src; + + for (src = 0; src < MAX_BUS_CLK; src++) { + rate = ourhost->clk_rates[src]; + if (rate > max) + max = rate; + } + + return max; +} + +/** + * sdhci_s3c_consider_clock - consider one the bus clocks for current setting + * @ourhost: Our SDHCI instance. + * @src: The source clock index. + * @wanted: The clock frequency wanted. + */ +static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost, + unsigned int src, + unsigned int wanted) +{ + unsigned long rate; + struct clk *clksrc = ourhost->clk_bus[src]; + int shift; + + if (IS_ERR(clksrc)) + return UINT_MAX; + + /* + * If controller uses a non-standard clock division, find the best clock + * speed possible with selected clock source and skip the division. + */ + if (ourhost->no_divider) { + rate = clk_round_rate(clksrc, wanted); + return wanted - rate; + } + + rate = ourhost->clk_rates[src]; + + for (shift = 0; shift <= 8; ++shift) { + if ((rate >> shift) <= wanted) + break; + } + + if (shift > 8) { + dev_dbg(&ourhost->pdev->dev, + "clk %d: rate %ld, min rate %lu > wanted %u\n", + src, rate, rate / 256, wanted); + return UINT_MAX; + } + + dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n", + src, rate, wanted, rate >> shift); + + return wanted - (rate >> shift); +} + +/** + * sdhci_s3c_set_clock - callback on clock change + * @host: The SDHCI host being changed + * @clock: The clock rate being requested. + * + * When the card's clock is going to be changed, look at the new frequency + * and find the best clock source to go with it. +*/ +static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock) +{ + struct sdhci_s3c *ourhost = to_s3c(host); + unsigned int best = UINT_MAX; + unsigned int delta; + int best_src = 0; + int src; + u32 ctrl; + + host->mmc->actual_clock = 0; + + /* don't bother if the clock is going off. */ + if (clock == 0) { + sdhci_set_clock(host, clock); + return; + } + + for (src = 0; src < MAX_BUS_CLK; src++) { + delta = sdhci_s3c_consider_clock(ourhost, src, clock); + if (delta < best) { + best = delta; + best_src = src; + } + } + + dev_dbg(&ourhost->pdev->dev, + "selected source %d, clock %d, delta %d\n", + best_src, clock, best); + + /* select the new clock source */ + if (ourhost->cur_clk != best_src) { + struct clk *clk = ourhost->clk_bus[best_src]; + + clk_prepare_enable(clk); + if (ourhost->cur_clk >= 0) + clk_disable_unprepare( + ourhost->clk_bus[ourhost->cur_clk]); + + ourhost->cur_clk = best_src; + host->max_clk = ourhost->clk_rates[best_src]; + } + + /* turn clock off to card before changing clock source */ + writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL); + + ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2); + ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK; + ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT; + writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2); + + /* reprogram default hardware configuration */ + writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, + host->ioaddr + S3C64XX_SDHCI_CONTROL4); + + ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2); + ctrl |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | + S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | + S3C_SDHCI_CTRL2_ENFBCLKRX | + S3C_SDHCI_CTRL2_DFCNT_NONE | + S3C_SDHCI_CTRL2_ENCLKOUTHOLD); + writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2); + + /* reconfigure the controller for new clock rate */ + ctrl = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); + if (clock < 25 * 1000000) + ctrl |= (S3C_SDHCI_CTRL3_FCSEL3 | S3C_SDHCI_CTRL3_FCSEL2); + writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL3); + + sdhci_set_clock(host, clock); +} + +/** + * sdhci_s3c_get_min_clock - callback to get minimal supported clock value + * @host: The SDHCI host being queried + * + * To init mmc host properly a minimal clock value is needed. For high system + * bus clock's values the standard formula gives values out of allowed range. + * The clock still can be set to lower values, if clock source other then + * system bus is selected. +*/ +static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host) +{ + struct sdhci_s3c *ourhost = to_s3c(host); + unsigned long rate, min = ULONG_MAX; + int src; + + for (src = 0; src < MAX_BUS_CLK; src++) { + rate = ourhost->clk_rates[src] / 256; + if (!rate) + continue; + if (rate < min) + min = rate; + } + + return min; +} + +/* sdhci_cmu_get_max_clk - callback to get maximum clock frequency.*/ +static unsigned int sdhci_cmu_get_max_clock(struct sdhci_host *host) +{ + struct sdhci_s3c *ourhost = to_s3c(host); + unsigned long rate, max = 0; + int src; + + for (src = 0; src < MAX_BUS_CLK; src++) { + struct clk *clk; + + clk = ourhost->clk_bus[src]; + if (IS_ERR(clk)) + continue; + + rate = clk_round_rate(clk, ULONG_MAX); + if (rate > max) + max = rate; + } + + return max; +} + +/* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */ +static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host) +{ + struct sdhci_s3c *ourhost = to_s3c(host); + unsigned long rate, min = ULONG_MAX; + int src; + + for (src = 0; src < MAX_BUS_CLK; src++) { + struct clk *clk; + + clk = ourhost->clk_bus[src]; + if (IS_ERR(clk)) + continue; + + rate = clk_round_rate(clk, 0); + if (rate < min) + min = rate; + } + + return min; +} + +/* sdhci_cmu_set_clock - callback on clock change.*/ +static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock) +{ + struct sdhci_s3c *ourhost = to_s3c(host); + struct device *dev = &ourhost->pdev->dev; + unsigned long timeout; + u16 clk = 0; + int ret; + + host->mmc->actual_clock = 0; + + /* If the clock is going off, set to 0 at clock control register */ + if (clock == 0) { + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); + return; + } + + sdhci_s3c_set_clock(host, clock); + + /* Reset SD Clock Enable */ + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + clk &= ~SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + ret = clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock); + if (ret != 0) { + dev_err(dev, "%s: failed to set clock rate %uHz\n", + mmc_hostname(host->mmc), clock); + return; + } + + clk = SDHCI_CLOCK_INT_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + /* Wait max 20 ms */ + timeout = 20; + while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) + & SDHCI_CLOCK_INT_STABLE)) { + if (timeout == 0) { + dev_err(dev, "%s: Internal clock never stabilised.\n", + mmc_hostname(host->mmc)); + return; + } + timeout--; + mdelay(1); + } + + clk |= SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); +} + +static struct sdhci_ops sdhci_s3c_ops = { + .get_max_clock = sdhci_s3c_get_max_clk, + .set_clock = sdhci_s3c_set_clock, + .get_min_clock = sdhci_s3c_get_min_clock, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, +}; + +#ifdef CONFIG_OF +static int sdhci_s3c_parse_dt(struct device *dev, + struct sdhci_host *host, struct s3c_sdhci_platdata *pdata) +{ + struct device_node *node = dev->of_node; + u32 max_width; + + /* if the bus-width property is not specified, assume width as 1 */ + if (of_property_read_u32(node, "bus-width", &max_width)) + max_width = 1; + pdata->max_width = max_width; + + /* get the card detection method */ + if (of_get_property(node, "broken-cd", NULL)) { + pdata->cd_type = S3C_SDHCI_CD_NONE; + return 0; + } + + if (of_get_property(node, "non-removable", NULL)) { + pdata->cd_type = S3C_SDHCI_CD_PERMANENT; + return 0; + } + + if (of_get_named_gpio(node, "cd-gpios", 0)) + return 0; + + /* assuming internal card detect that will be configured by pinctrl */ + pdata->cd_type = S3C_SDHCI_CD_INTERNAL; + return 0; +} +#else +static int sdhci_s3c_parse_dt(struct device *dev, + struct sdhci_host *host, struct s3c_sdhci_platdata *pdata) +{ + return -EINVAL; +} +#endif + +static inline const struct sdhci_s3c_drv_data *sdhci_s3c_get_driver_data( + struct platform_device *pdev) +{ +#ifdef CONFIG_OF + if (pdev->dev.of_node) + return of_device_get_match_data(&pdev->dev); +#endif + return (const struct sdhci_s3c_drv_data *) + platform_get_device_id(pdev)->driver_data; +} + +static int sdhci_s3c_probe(struct platform_device *pdev) +{ + struct s3c_sdhci_platdata *pdata; + const struct sdhci_s3c_drv_data *drv_data; + struct device *dev = &pdev->dev; + struct sdhci_host *host; + struct sdhci_s3c *sc; + int ret, irq, ptr, clks; + + if (!pdev->dev.platform_data && !pdev->dev.of_node) { + dev_err(dev, "no device data specified\n"); + return -ENOENT; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c)); + if (IS_ERR(host)) { + dev_err(dev, "sdhci_alloc_host() failed\n"); + return PTR_ERR(host); + } + sc = sdhci_priv(host); + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + ret = -ENOMEM; + goto err_pdata_io_clk; + } + + if (pdev->dev.of_node) { + ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata); + if (ret) + goto err_pdata_io_clk; + } else { + memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata)); + } + + drv_data = sdhci_s3c_get_driver_data(pdev); + + sc->host = host; + sc->pdev = pdev; + sc->pdata = pdata; + sc->cur_clk = -1; + + platform_set_drvdata(pdev, host); + + sc->clk_io = devm_clk_get(dev, "hsmmc"); + if (IS_ERR(sc->clk_io)) { + dev_err(dev, "failed to get io clock\n"); + ret = PTR_ERR(sc->clk_io); + goto err_pdata_io_clk; + } + + /* enable the local io clock and keep it running for the moment. */ + clk_prepare_enable(sc->clk_io); + + for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) { + char name[14]; + + snprintf(name, 14, "mmc_busclk.%d", ptr); + sc->clk_bus[ptr] = devm_clk_get(dev, name); + if (IS_ERR(sc->clk_bus[ptr])) + continue; + + clks++; + sc->clk_rates[ptr] = clk_get_rate(sc->clk_bus[ptr]); + + dev_info(dev, "clock source %d: %s (%ld Hz)\n", + ptr, name, sc->clk_rates[ptr]); + } + + if (clks == 0) { + dev_err(dev, "failed to find any bus clocks\n"); + ret = -ENOENT; + goto err_no_busclks; + } + + host->ioaddr = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(host->ioaddr)) { + ret = PTR_ERR(host->ioaddr); + goto err_req_regs; + } + + /* Ensure we have minimal gpio selected CMD/CLK/Detect */ + if (pdata->cfg_gpio) + pdata->cfg_gpio(pdev, pdata->max_width); + + host->hw_name = "samsung-hsmmc"; + host->ops = &sdhci_s3c_ops; + host->quirks = 0; + host->quirks2 = 0; + host->irq = irq; + + /* Setup quirks for the controller */ + host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC; + host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT; + if (drv_data) { + host->quirks |= drv_data->sdhci_quirks; + sc->no_divider = drv_data->no_divider; + } + +#ifndef CONFIG_MMC_SDHCI_S3C_DMA + + /* we currently see overruns on errors, so disable the SDMA + * support as well. */ + host->quirks |= SDHCI_QUIRK_BROKEN_DMA; + +#endif /* CONFIG_MMC_SDHCI_S3C_DMA */ + + /* It seems we do not get an DATA transfer complete on non-busy + * transfers, not sure if this is a problem with this specific + * SDHCI block, or a missing configuration that needs to be set. */ + host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ; + + /* This host supports the Auto CMD12 */ + host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12; + + /* Samsung SoCs need BROKEN_ADMA_ZEROLEN_DESC */ + host->quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC; + + if (pdata->cd_type == S3C_SDHCI_CD_NONE || + pdata->cd_type == S3C_SDHCI_CD_PERMANENT) + host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; + + if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT) + host->mmc->caps = MMC_CAP_NONREMOVABLE; + + switch (pdata->max_width) { + case 8: + host->mmc->caps |= MMC_CAP_8_BIT_DATA; + fallthrough; + case 4: + host->mmc->caps |= MMC_CAP_4_BIT_DATA; + break; + } + + if (pdata->pm_caps) + host->mmc->pm_caps |= pdata->pm_caps; + + host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_32BIT_DMA_SIZE); + + /* HSMMC on Samsung SoCs uses SDCLK as timeout clock */ + host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK; + + /* + * If controller does not have internal clock divider, + * we can use overriding functions instead of default. + */ + if (sc->no_divider) { + sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock; + sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock; + sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock; + } + + /* It supports additional host capabilities if needed */ + if (pdata->host_caps) + host->mmc->caps |= pdata->host_caps; + + if (pdata->host_caps2) + host->mmc->caps2 |= pdata->host_caps2; + + pm_runtime_enable(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, 50); + pm_runtime_use_autosuspend(&pdev->dev); + pm_suspend_ignore_children(&pdev->dev, 1); + + ret = mmc_of_parse(host->mmc); + if (ret) + goto err_req_regs; + + ret = sdhci_add_host(host); + if (ret) + goto err_req_regs; + +#ifdef CONFIG_PM + if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL) + clk_disable_unprepare(sc->clk_io); +#endif + return 0; + + err_req_regs: + pm_runtime_disable(&pdev->dev); + + err_no_busclks: + clk_disable_unprepare(sc->clk_io); + + err_pdata_io_clk: + sdhci_free_host(host); + + return ret; +} + +static int sdhci_s3c_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_s3c *sc = sdhci_priv(host); + + if (sc->ext_cd_irq) + free_irq(sc->ext_cd_irq, sc); + +#ifdef CONFIG_PM + if (sc->pdata->cd_type != S3C_SDHCI_CD_INTERNAL) + clk_prepare_enable(sc->clk_io); +#endif + sdhci_remove_host(host, 1); + + pm_runtime_dont_use_autosuspend(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + clk_disable_unprepare(sc->clk_io); + + sdhci_free_host(host); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int sdhci_s3c_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + + if (host->tuning_mode != SDHCI_TUNING_MODE_3) + mmc_retune_needed(host->mmc); + + return sdhci_suspend_host(host); +} + +static int sdhci_s3c_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + + return sdhci_resume_host(host); +} +#endif + +#ifdef CONFIG_PM +static int sdhci_s3c_runtime_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_s3c *ourhost = to_s3c(host); + struct clk *busclk = ourhost->clk_io; + int ret; + + ret = sdhci_runtime_suspend_host(host); + + if (host->tuning_mode != SDHCI_TUNING_MODE_3) + mmc_retune_needed(host->mmc); + + if (ourhost->cur_clk >= 0) + clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]); + clk_disable_unprepare(busclk); + return ret; +} + +static int sdhci_s3c_runtime_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_s3c *ourhost = to_s3c(host); + struct clk *busclk = ourhost->clk_io; + int ret; + + clk_prepare_enable(busclk); + if (ourhost->cur_clk >= 0) + clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]); + ret = sdhci_runtime_resume_host(host, 0); + return ret; +} +#endif + +static const struct dev_pm_ops sdhci_s3c_pmops = { + SET_SYSTEM_SLEEP_PM_OPS(sdhci_s3c_suspend, sdhci_s3c_resume) + SET_RUNTIME_PM_OPS(sdhci_s3c_runtime_suspend, sdhci_s3c_runtime_resume, + NULL) +}; + +static const struct platform_device_id sdhci_s3c_driver_ids[] = { + { + .name = "s3c-sdhci", + .driver_data = (kernel_ulong_t)NULL, + }, + { } +}; +MODULE_DEVICE_TABLE(platform, sdhci_s3c_driver_ids); + +#ifdef CONFIG_OF +static const struct sdhci_s3c_drv_data exynos4_sdhci_drv_data = { + .no_divider = true, +}; + +static const struct of_device_id sdhci_s3c_dt_match[] = { + { .compatible = "samsung,s3c6410-sdhci", }, + { .compatible = "samsung,exynos4210-sdhci", + .data = &exynos4_sdhci_drv_data }, + {}, +}; +MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match); +#endif + +static struct platform_driver sdhci_s3c_driver = { + .probe = sdhci_s3c_probe, + .remove = sdhci_s3c_remove, + .id_table = sdhci_s3c_driver_ids, + .driver = { + .name = "s3c-sdhci", + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + .of_match_table = of_match_ptr(sdhci_s3c_dt_match), + .pm = &sdhci_s3c_pmops, + }, +}; + +module_platform_driver(sdhci_s3c_driver); + +MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue"); +MODULE_AUTHOR("Ben Dooks, "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3