From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/net/dsa/vitesse-vsc73xx-core.c | 1233 ++++++++++++++++++++++++++++++++ 1 file changed, 1233 insertions(+) create mode 100644 drivers/net/dsa/vitesse-vsc73xx-core.c (limited to 'drivers/net/dsa/vitesse-vsc73xx-core.c') diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c new file mode 100644 index 000000000..3efd55669 --- /dev/null +++ b/drivers/net/dsa/vitesse-vsc73xx-core.c @@ -0,0 +1,1233 @@ +// SPDX-License-Identifier: GPL-2.0 +/* DSA driver for: + * Vitesse VSC7385 SparX-G5 5+1-port Integrated Gigabit Ethernet Switch + * Vitesse VSC7388 SparX-G8 8-port Integrated Gigabit Ethernet Switch + * Vitesse VSC7395 SparX-G5e 5+1-port Integrated Gigabit Ethernet Switch + * Vitesse VSC7398 SparX-G8e 8-port Integrated Gigabit Ethernet Switch + * + * These switches have a built-in 8051 CPU and can download and execute a + * firmware in this CPU. They can also be configured to use an external CPU + * handling the switch in a memory-mapped manner by connecting to that external + * CPU's memory bus. + * + * Copyright (C) 2018 Linus Wallej + * Includes portions of code from the firmware uploader by: + * Copyright (C) 2009 Gabor Juhos + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "vitesse-vsc73xx.h" + +#define VSC73XX_BLOCK_MAC 0x1 /* Subblocks 0-4, 6 (CPU port) */ +#define VSC73XX_BLOCK_ANALYZER 0x2 /* Only subblock 0 */ +#define VSC73XX_BLOCK_MII 0x3 /* Subblocks 0 and 1 */ +#define VSC73XX_BLOCK_MEMINIT 0x3 /* Only subblock 2 */ +#define VSC73XX_BLOCK_CAPTURE 0x4 /* Only subblock 2 */ +#define VSC73XX_BLOCK_ARBITER 0x5 /* Only subblock 0 */ +#define VSC73XX_BLOCK_SYSTEM 0x7 /* Only subblock 0 */ + +#define CPU_PORT 6 /* CPU port */ + +/* MAC Block registers */ +#define VSC73XX_MAC_CFG 0x00 +#define VSC73XX_MACHDXGAP 0x02 +#define VSC73XX_FCCONF 0x04 +#define VSC73XX_FCMACHI 0x08 +#define VSC73XX_FCMACLO 0x0c +#define VSC73XX_MAXLEN 0x10 +#define VSC73XX_ADVPORTM 0x19 +#define VSC73XX_TXUPDCFG 0x24 +#define VSC73XX_TXQ_SELECT_CFG 0x28 +#define VSC73XX_RXOCT 0x50 +#define VSC73XX_TXOCT 0x51 +#define VSC73XX_C_RX0 0x52 +#define VSC73XX_C_RX1 0x53 +#define VSC73XX_C_RX2 0x54 +#define VSC73XX_C_TX0 0x55 +#define VSC73XX_C_TX1 0x56 +#define VSC73XX_C_TX2 0x57 +#define VSC73XX_C_CFG 0x58 +#define VSC73XX_CAT_DROP 0x6e +#define VSC73XX_CAT_PR_MISC_L2 0x6f +#define VSC73XX_CAT_PR_USR_PRIO 0x75 +#define VSC73XX_Q_MISC_CONF 0xdf + +/* MAC_CFG register bits */ +#define VSC73XX_MAC_CFG_WEXC_DIS BIT(31) +#define VSC73XX_MAC_CFG_PORT_RST BIT(29) +#define VSC73XX_MAC_CFG_TX_EN BIT(28) +#define VSC73XX_MAC_CFG_SEED_LOAD BIT(27) +#define VSC73XX_MAC_CFG_SEED_MASK GENMASK(26, 19) +#define VSC73XX_MAC_CFG_SEED_OFFSET 19 +#define VSC73XX_MAC_CFG_FDX BIT(18) +#define VSC73XX_MAC_CFG_GIGA_MODE BIT(17) +#define VSC73XX_MAC_CFG_RX_EN BIT(16) +#define VSC73XX_MAC_CFG_VLAN_DBLAWR BIT(15) +#define VSC73XX_MAC_CFG_VLAN_AWR BIT(14) +#define VSC73XX_MAC_CFG_100_BASE_T BIT(13) /* Not in manual */ +#define VSC73XX_MAC_CFG_TX_IPG_MASK GENMASK(10, 6) +#define VSC73XX_MAC_CFG_TX_IPG_OFFSET 6 +#define VSC73XX_MAC_CFG_TX_IPG_1000M (6 << VSC73XX_MAC_CFG_TX_IPG_OFFSET) +#define VSC73XX_MAC_CFG_TX_IPG_100_10M (17 << VSC73XX_MAC_CFG_TX_IPG_OFFSET) +#define VSC73XX_MAC_CFG_MAC_RX_RST BIT(5) +#define VSC73XX_MAC_CFG_MAC_TX_RST BIT(4) +#define VSC73XX_MAC_CFG_CLK_SEL_MASK GENMASK(2, 0) +#define VSC73XX_MAC_CFG_CLK_SEL_OFFSET 0 +#define VSC73XX_MAC_CFG_CLK_SEL_1000M 1 +#define VSC73XX_MAC_CFG_CLK_SEL_100M 2 +#define VSC73XX_MAC_CFG_CLK_SEL_10M 3 +#define VSC73XX_MAC_CFG_CLK_SEL_EXT 4 + +#define VSC73XX_MAC_CFG_1000M_F_PHY (VSC73XX_MAC_CFG_FDX | \ + VSC73XX_MAC_CFG_GIGA_MODE | \ + VSC73XX_MAC_CFG_TX_IPG_1000M | \ + VSC73XX_MAC_CFG_CLK_SEL_EXT) +#define VSC73XX_MAC_CFG_100_10M_F_PHY (VSC73XX_MAC_CFG_FDX | \ + VSC73XX_MAC_CFG_TX_IPG_100_10M | \ + VSC73XX_MAC_CFG_CLK_SEL_EXT) +#define VSC73XX_MAC_CFG_100_10M_H_PHY (VSC73XX_MAC_CFG_TX_IPG_100_10M | \ + VSC73XX_MAC_CFG_CLK_SEL_EXT) +#define VSC73XX_MAC_CFG_1000M_F_RGMII (VSC73XX_MAC_CFG_FDX | \ + VSC73XX_MAC_CFG_GIGA_MODE | \ + VSC73XX_MAC_CFG_TX_IPG_1000M | \ + VSC73XX_MAC_CFG_CLK_SEL_1000M) +#define VSC73XX_MAC_CFG_RESET (VSC73XX_MAC_CFG_PORT_RST | \ + VSC73XX_MAC_CFG_MAC_RX_RST | \ + VSC73XX_MAC_CFG_MAC_TX_RST) + +/* Flow control register bits */ +#define VSC73XX_FCCONF_ZERO_PAUSE_EN BIT(17) +#define VSC73XX_FCCONF_FLOW_CTRL_OBEY BIT(16) +#define VSC73XX_FCCONF_PAUSE_VAL_MASK GENMASK(15, 0) + +/* ADVPORTM advanced port setup register bits */ +#define VSC73XX_ADVPORTM_IFG_PPM BIT(7) +#define VSC73XX_ADVPORTM_EXC_COL_CONT BIT(6) +#define VSC73XX_ADVPORTM_EXT_PORT BIT(5) +#define VSC73XX_ADVPORTM_INV_GTX BIT(4) +#define VSC73XX_ADVPORTM_ENA_GTX BIT(3) +#define VSC73XX_ADVPORTM_DDR_MODE BIT(2) +#define VSC73XX_ADVPORTM_IO_LOOPBACK BIT(1) +#define VSC73XX_ADVPORTM_HOST_LOOPBACK BIT(0) + +/* CAT_DROP categorizer frame dropping register bits */ +#define VSC73XX_CAT_DROP_DROP_MC_SMAC_ENA BIT(6) +#define VSC73XX_CAT_DROP_FWD_CTRL_ENA BIT(4) +#define VSC73XX_CAT_DROP_FWD_PAUSE_ENA BIT(3) +#define VSC73XX_CAT_DROP_UNTAGGED_ENA BIT(2) +#define VSC73XX_CAT_DROP_TAGGED_ENA BIT(1) +#define VSC73XX_CAT_DROP_NULL_MAC_ENA BIT(0) + +#define VSC73XX_Q_MISC_CONF_EXTENT_MEM BIT(31) +#define VSC73XX_Q_MISC_CONF_EARLY_TX_MASK GENMASK(4, 1) +#define VSC73XX_Q_MISC_CONF_EARLY_TX_512 (1 << 1) +#define VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE BIT(0) + +/* Frame analyzer block 2 registers */ +#define VSC73XX_STORMLIMIT 0x02 +#define VSC73XX_ADVLEARN 0x03 +#define VSC73XX_IFLODMSK 0x04 +#define VSC73XX_VLANMASK 0x05 +#define VSC73XX_MACHDATA 0x06 +#define VSC73XX_MACLDATA 0x07 +#define VSC73XX_ANMOVED 0x08 +#define VSC73XX_ANAGEFIL 0x09 +#define VSC73XX_ANEVENTS 0x0a +#define VSC73XX_ANCNTMASK 0x0b +#define VSC73XX_ANCNTVAL 0x0c +#define VSC73XX_LEARNMASK 0x0d +#define VSC73XX_UFLODMASK 0x0e +#define VSC73XX_MFLODMASK 0x0f +#define VSC73XX_RECVMASK 0x10 +#define VSC73XX_AGGRCTRL 0x20 +#define VSC73XX_AGGRMSKS 0x30 /* Until 0x3f */ +#define VSC73XX_DSTMASKS 0x40 /* Until 0x7f */ +#define VSC73XX_SRCMASKS 0x80 /* Until 0x87 */ +#define VSC73XX_CAPENAB 0xa0 +#define VSC73XX_MACACCESS 0xb0 +#define VSC73XX_IPMCACCESS 0xb1 +#define VSC73XX_MACTINDX 0xc0 +#define VSC73XX_VLANACCESS 0xd0 +#define VSC73XX_VLANTIDX 0xe0 +#define VSC73XX_AGENCTRL 0xf0 +#define VSC73XX_CAPRST 0xff + +#define VSC73XX_MACACCESS_CPU_COPY BIT(14) +#define VSC73XX_MACACCESS_FWD_KILL BIT(13) +#define VSC73XX_MACACCESS_IGNORE_VLAN BIT(12) +#define VSC73XX_MACACCESS_AGED_FLAG BIT(11) +#define VSC73XX_MACACCESS_VALID BIT(10) +#define VSC73XX_MACACCESS_LOCKED BIT(9) +#define VSC73XX_MACACCESS_DEST_IDX_MASK GENMASK(8, 3) +#define VSC73XX_MACACCESS_CMD_MASK GENMASK(2, 0) +#define VSC73XX_MACACCESS_CMD_IDLE 0 +#define VSC73XX_MACACCESS_CMD_LEARN 1 +#define VSC73XX_MACACCESS_CMD_FORGET 2 +#define VSC73XX_MACACCESS_CMD_AGE_TABLE 3 +#define VSC73XX_MACACCESS_CMD_FLUSH_TABLE 4 +#define VSC73XX_MACACCESS_CMD_CLEAR_TABLE 5 +#define VSC73XX_MACACCESS_CMD_READ_ENTRY 6 +#define VSC73XX_MACACCESS_CMD_WRITE_ENTRY 7 + +#define VSC73XX_VLANACCESS_LEARN_DISABLED BIT(30) +#define VSC73XX_VLANACCESS_VLAN_MIRROR BIT(29) +#define VSC73XX_VLANACCESS_VLAN_SRC_CHECK BIT(28) +#define VSC73XX_VLANACCESS_VLAN_PORT_MASK GENMASK(9, 2) +#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_MASK GENMASK(2, 0) +#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_IDLE 0 +#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_READ_ENTRY 1 +#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_WRITE_ENTRY 2 +#define VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE 3 + +/* MII block 3 registers */ +#define VSC73XX_MII_STAT 0x0 +#define VSC73XX_MII_CMD 0x1 +#define VSC73XX_MII_DATA 0x2 + +/* Arbiter block 5 registers */ +#define VSC73XX_ARBEMPTY 0x0c +#define VSC73XX_ARBDISC 0x0e +#define VSC73XX_SBACKWDROP 0x12 +#define VSC73XX_DBACKWDROP 0x13 +#define VSC73XX_ARBBURSTPROB 0x15 + +/* System block 7 registers */ +#define VSC73XX_ICPU_SIPAD 0x01 +#define VSC73XX_GMIIDELAY 0x05 +#define VSC73XX_ICPU_CTRL 0x10 +#define VSC73XX_ICPU_ADDR 0x11 +#define VSC73XX_ICPU_SRAM 0x12 +#define VSC73XX_HWSEM 0x13 +#define VSC73XX_GLORESET 0x14 +#define VSC73XX_ICPU_MBOX_VAL 0x15 +#define VSC73XX_ICPU_MBOX_SET 0x16 +#define VSC73XX_ICPU_MBOX_CLR 0x17 +#define VSC73XX_CHIPID 0x18 +#define VSC73XX_GPIO 0x34 + +#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_NONE 0 +#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_4_NS 1 +#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_1_7_NS 2 +#define VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS 3 + +#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_NONE (0 << 4) +#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_4_NS (1 << 4) +#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_1_7_NS (2 << 4) +#define VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS (3 << 4) + +#define VSC73XX_ICPU_CTRL_WATCHDOG_RST BIT(31) +#define VSC73XX_ICPU_CTRL_CLK_DIV_MASK GENMASK(12, 8) +#define VSC73XX_ICPU_CTRL_SRST_HOLD BIT(7) +#define VSC73XX_ICPU_CTRL_ICPU_PI_EN BIT(6) +#define VSC73XX_ICPU_CTRL_BOOT_EN BIT(3) +#define VSC73XX_ICPU_CTRL_EXT_ACC_EN BIT(2) +#define VSC73XX_ICPU_CTRL_CLK_EN BIT(1) +#define VSC73XX_ICPU_CTRL_SRST BIT(0) + +#define VSC73XX_CHIPID_ID_SHIFT 12 +#define VSC73XX_CHIPID_ID_MASK 0xffff +#define VSC73XX_CHIPID_REV_SHIFT 28 +#define VSC73XX_CHIPID_REV_MASK 0xf +#define VSC73XX_CHIPID_ID_7385 0x7385 +#define VSC73XX_CHIPID_ID_7388 0x7388 +#define VSC73XX_CHIPID_ID_7395 0x7395 +#define VSC73XX_CHIPID_ID_7398 0x7398 + +#define VSC73XX_GLORESET_STROBE BIT(4) +#define VSC73XX_GLORESET_ICPU_LOCK BIT(3) +#define VSC73XX_GLORESET_MEM_LOCK BIT(2) +#define VSC73XX_GLORESET_PHY_RESET BIT(1) +#define VSC73XX_GLORESET_MASTER_RESET BIT(0) + +#define VSC7385_CLOCK_DELAY ((3 << 4) | 3) +#define VSC7385_CLOCK_DELAY_MASK ((3 << 4) | 3) + +#define VSC73XX_ICPU_CTRL_STOP (VSC73XX_ICPU_CTRL_SRST_HOLD | \ + VSC73XX_ICPU_CTRL_BOOT_EN | \ + VSC73XX_ICPU_CTRL_EXT_ACC_EN) + +#define VSC73XX_ICPU_CTRL_START (VSC73XX_ICPU_CTRL_CLK_DIV | \ + VSC73XX_ICPU_CTRL_BOOT_EN | \ + VSC73XX_ICPU_CTRL_CLK_EN | \ + VSC73XX_ICPU_CTRL_SRST) + +#define IS_7385(a) ((a)->chipid == VSC73XX_CHIPID_ID_7385) +#define IS_7388(a) ((a)->chipid == VSC73XX_CHIPID_ID_7388) +#define IS_7395(a) ((a)->chipid == VSC73XX_CHIPID_ID_7395) +#define IS_7398(a) ((a)->chipid == VSC73XX_CHIPID_ID_7398) +#define IS_739X(a) (IS_7395(a) || IS_7398(a)) + +struct vsc73xx_counter { + u8 counter; + const char *name; +}; + +/* Counters are named according to the MIB standards where applicable. + * Some counters are custom, non-standard. The standard counters are + * named in accordance with RFC2819, RFC2021 and IEEE Std 802.3-2002 Annex + * 30A Counters. + */ +static const struct vsc73xx_counter vsc73xx_rx_counters[] = { + { 0, "RxEtherStatsPkts" }, + { 1, "RxBroadcast+MulticastPkts" }, /* non-standard counter */ + { 2, "RxTotalErrorPackets" }, /* non-standard counter */ + { 3, "RxEtherStatsBroadcastPkts" }, + { 4, "RxEtherStatsMulticastPkts" }, + { 5, "RxEtherStatsPkts64Octets" }, + { 6, "RxEtherStatsPkts65to127Octets" }, + { 7, "RxEtherStatsPkts128to255Octets" }, + { 8, "RxEtherStatsPkts256to511Octets" }, + { 9, "RxEtherStatsPkts512to1023Octets" }, + { 10, "RxEtherStatsPkts1024to1518Octets" }, + { 11, "RxJumboFrames" }, /* non-standard counter */ + { 12, "RxaPauseMACControlFramesTransmitted" }, + { 13, "RxFIFODrops" }, /* non-standard counter */ + { 14, "RxBackwardDrops" }, /* non-standard counter */ + { 15, "RxClassifierDrops" }, /* non-standard counter */ + { 16, "RxEtherStatsCRCAlignErrors" }, + { 17, "RxEtherStatsUndersizePkts" }, + { 18, "RxEtherStatsOversizePkts" }, + { 19, "RxEtherStatsFragments" }, + { 20, "RxEtherStatsJabbers" }, + { 21, "RxaMACControlFramesReceived" }, + /* 22-24 are undefined */ + { 25, "RxaFramesReceivedOK" }, + { 26, "RxQoSClass0" }, /* non-standard counter */ + { 27, "RxQoSClass1" }, /* non-standard counter */ + { 28, "RxQoSClass2" }, /* non-standard counter */ + { 29, "RxQoSClass3" }, /* non-standard counter */ +}; + +static const struct vsc73xx_counter vsc73xx_tx_counters[] = { + { 0, "TxEtherStatsPkts" }, + { 1, "TxBroadcast+MulticastPkts" }, /* non-standard counter */ + { 2, "TxTotalErrorPackets" }, /* non-standard counter */ + { 3, "TxEtherStatsBroadcastPkts" }, + { 4, "TxEtherStatsMulticastPkts" }, + { 5, "TxEtherStatsPkts64Octets" }, + { 6, "TxEtherStatsPkts65to127Octets" }, + { 7, "TxEtherStatsPkts128to255Octets" }, + { 8, "TxEtherStatsPkts256to511Octets" }, + { 9, "TxEtherStatsPkts512to1023Octets" }, + { 10, "TxEtherStatsPkts1024to1518Octets" }, + { 11, "TxJumboFrames" }, /* non-standard counter */ + { 12, "TxaPauseMACControlFramesTransmitted" }, + { 13, "TxFIFODrops" }, /* non-standard counter */ + { 14, "TxDrops" }, /* non-standard counter */ + { 15, "TxEtherStatsCollisions" }, + { 16, "TxEtherStatsCRCAlignErrors" }, + { 17, "TxEtherStatsUndersizePkts" }, + { 18, "TxEtherStatsOversizePkts" }, + { 19, "TxEtherStatsFragments" }, + { 20, "TxEtherStatsJabbers" }, + /* 21-24 are undefined */ + { 25, "TxaFramesReceivedOK" }, + { 26, "TxQoSClass0" }, /* non-standard counter */ + { 27, "TxQoSClass1" }, /* non-standard counter */ + { 28, "TxQoSClass2" }, /* non-standard counter */ + { 29, "TxQoSClass3" }, /* non-standard counter */ +}; + +int vsc73xx_is_addr_valid(u8 block, u8 subblock) +{ + switch (block) { + case VSC73XX_BLOCK_MAC: + switch (subblock) { + case 0 ... 4: + case 6: + return 1; + } + break; + + case VSC73XX_BLOCK_ANALYZER: + case VSC73XX_BLOCK_SYSTEM: + switch (subblock) { + case 0: + return 1; + } + break; + + case VSC73XX_BLOCK_MII: + case VSC73XX_BLOCK_CAPTURE: + case VSC73XX_BLOCK_ARBITER: + switch (subblock) { + case 0 ... 1: + return 1; + } + break; + } + + return 0; +} +EXPORT_SYMBOL(vsc73xx_is_addr_valid); + +static int vsc73xx_read(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg, + u32 *val) +{ + return vsc->ops->read(vsc, block, subblock, reg, val); +} + +static int vsc73xx_write(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg, + u32 val) +{ + return vsc->ops->write(vsc, block, subblock, reg, val); +} + +static int vsc73xx_update_bits(struct vsc73xx *vsc, u8 block, u8 subblock, + u8 reg, u32 mask, u32 val) +{ + u32 tmp, orig; + int ret; + + /* Same read-modify-write algorithm as e.g. regmap */ + ret = vsc73xx_read(vsc, block, subblock, reg, &orig); + if (ret) + return ret; + tmp = orig & ~mask; + tmp |= val & mask; + return vsc73xx_write(vsc, block, subblock, reg, tmp); +} + +static int vsc73xx_detect(struct vsc73xx *vsc) +{ + bool icpu_si_boot_en; + bool icpu_pi_en; + u32 val; + u32 rev; + int ret; + u32 id; + + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, + VSC73XX_ICPU_MBOX_VAL, &val); + if (ret) { + dev_err(vsc->dev, "unable to read mailbox (%d)\n", ret); + return ret; + } + + if (val == 0xffffffff) { + dev_info(vsc->dev, "chip seems dead.\n"); + return -EAGAIN; + } + + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, + VSC73XX_CHIPID, &val); + if (ret) { + dev_err(vsc->dev, "unable to read chip id (%d)\n", ret); + return ret; + } + + id = (val >> VSC73XX_CHIPID_ID_SHIFT) & + VSC73XX_CHIPID_ID_MASK; + switch (id) { + case VSC73XX_CHIPID_ID_7385: + case VSC73XX_CHIPID_ID_7388: + case VSC73XX_CHIPID_ID_7395: + case VSC73XX_CHIPID_ID_7398: + break; + default: + dev_err(vsc->dev, "unsupported chip, id=%04x\n", id); + return -ENODEV; + } + + vsc->chipid = id; + rev = (val >> VSC73XX_CHIPID_REV_SHIFT) & + VSC73XX_CHIPID_REV_MASK; + dev_info(vsc->dev, "VSC%04X (rev: %d) switch found\n", id, rev); + + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, + VSC73XX_ICPU_CTRL, &val); + if (ret) { + dev_err(vsc->dev, "unable to read iCPU control\n"); + return ret; + } + + /* The iCPU can always be used but can boot in different ways. + * If it is initially disabled and has no external memory, + * we are in control and can do whatever we like, else we + * are probably in trouble (we need some way to communicate + * with the running firmware) so we bail out for now. + */ + icpu_pi_en = !!(val & VSC73XX_ICPU_CTRL_ICPU_PI_EN); + icpu_si_boot_en = !!(val & VSC73XX_ICPU_CTRL_BOOT_EN); + if (icpu_si_boot_en && icpu_pi_en) { + dev_err(vsc->dev, + "iCPU enabled boots from SI, has external memory\n"); + dev_err(vsc->dev, "no idea how to deal with this\n"); + return -ENODEV; + } + if (icpu_si_boot_en && !icpu_pi_en) { + dev_err(vsc->dev, + "iCPU enabled boots from PI/SI, no external memory\n"); + return -EAGAIN; + } + if (!icpu_si_boot_en && icpu_pi_en) { + dev_err(vsc->dev, + "iCPU enabled, boots from PI external memory\n"); + dev_err(vsc->dev, "no idea how to deal with this\n"); + return -ENODEV; + } + /* !icpu_si_boot_en && !cpu_pi_en */ + dev_info(vsc->dev, "iCPU disabled, no external memory\n"); + + return 0; +} + +static int vsc73xx_phy_read(struct dsa_switch *ds, int phy, int regnum) +{ + struct vsc73xx *vsc = ds->priv; + u32 cmd; + u32 val; + int ret; + + /* Setting bit 26 means "read" */ + cmd = BIT(26) | (phy << 21) | (regnum << 16); + ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd); + if (ret) + return ret; + msleep(2); + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MII, 0, 2, &val); + if (ret) + return ret; + if (val & BIT(16)) { + dev_err(vsc->dev, "reading reg %02x from phy%d failed\n", + regnum, phy); + return -EIO; + } + val &= 0xFFFFU; + + dev_dbg(vsc->dev, "read reg %02x from phy%d = %04x\n", + regnum, phy, val); + + return val; +} + +static int vsc73xx_phy_write(struct dsa_switch *ds, int phy, int regnum, + u16 val) +{ + struct vsc73xx *vsc = ds->priv; + u32 cmd; + int ret; + + /* It was found through tedious experiments that this router + * chip really hates to have it's PHYs reset. They + * never recover if that happens: autonegotiation stops + * working after a reset. Just filter out this command. + * (Resetting the whole chip is OK.) + */ + if (regnum == 0 && (val & BIT(15))) { + dev_info(vsc->dev, "reset PHY - disallowed\n"); + return 0; + } + + cmd = (phy << 21) | (regnum << 16); + ret = vsc73xx_write(vsc, VSC73XX_BLOCK_MII, 0, 1, cmd); + if (ret) + return ret; + + dev_dbg(vsc->dev, "write %04x to reg %02x in phy%d\n", + val, regnum, phy); + return 0; +} + +static enum dsa_tag_protocol vsc73xx_get_tag_protocol(struct dsa_switch *ds, + int port, + enum dsa_tag_protocol mp) +{ + /* The switch internally uses a 8 byte header with length, + * source port, tag, LPA and priority. This is supposedly + * only accessible when operating the switch using the internal + * CPU or with an external CPU mapping the device in, but not + * when operating the switch over SPI and putting frames in/out + * on port 6 (the CPU port). So far we must assume that we + * cannot access the tag. (See "Internal frame header" section + * 3.9.1 in the manual.) + */ + return DSA_TAG_PROTO_NONE; +} + +static int vsc73xx_setup(struct dsa_switch *ds) +{ + struct vsc73xx *vsc = ds->priv; + int i; + + dev_info(vsc->dev, "set up the switch\n"); + + /* Issue RESET */ + vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET, + VSC73XX_GLORESET_MASTER_RESET); + usleep_range(125, 200); + + /* Initialize memory, initialize RAM bank 0..15 except 6 and 7 + * This sequence appears in the + * VSC7385 SparX-G5 datasheet section 6.6.1 + * VSC7395 SparX-G5e datasheet section 6.6.1 + * "initialization sequence". + * No explanation is given to the 0x1010400 magic number. + */ + for (i = 0; i <= 15; i++) { + if (i != 6 && i != 7) { + vsc73xx_write(vsc, VSC73XX_BLOCK_MEMINIT, + 2, + 0, 0x1010400 + i); + mdelay(1); + } + } + mdelay(30); + + /* Clear MAC table */ + vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_MACACCESS, + VSC73XX_MACACCESS_CMD_CLEAR_TABLE); + + /* Clear VLAN table */ + vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_VLANACCESS, + VSC73XX_VLANACCESS_VLAN_TBL_CMD_CLEAR_TABLE); + + msleep(40); + + /* Use 20KiB buffers on all ports on VSC7395 + * The VSC7385 has 16KiB buffers and that is the + * default if we don't set this up explicitly. + * Port "31" is "all ports". + */ + if (IS_739X(vsc)) + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 0x1f, + VSC73XX_Q_MISC_CONF, + VSC73XX_Q_MISC_CONF_EXTENT_MEM); + + /* Put all ports into reset until enabled */ + for (i = 0; i < 7; i++) { + if (i == 5) + continue; + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, 4, + VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET); + } + + /* MII delay, set both GTX and RX delay to 2 ns */ + vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GMIIDELAY, + VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS | + VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS); + /* Enable reception of frames on all ports */ + vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_RECVMASK, + 0x5f); + /* IP multicast flood mask (table 144) */ + vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_IFLODMSK, + 0xff); + + mdelay(50); + + /* Release reset from the internal PHYs */ + vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET, + VSC73XX_GLORESET_PHY_RESET); + + udelay(4); + + return 0; +} + +static void vsc73xx_init_port(struct vsc73xx *vsc, int port) +{ + u32 val; + + /* MAC configure, first reset the port and then write defaults */ + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + port, + VSC73XX_MAC_CFG, + VSC73XX_MAC_CFG_RESET); + + /* Take up the port in 1Gbit mode by default, this will be + * augmented after auto-negotiation on the PHY-facing + * ports. + */ + if (port == CPU_PORT) + val = VSC73XX_MAC_CFG_1000M_F_RGMII; + else + val = VSC73XX_MAC_CFG_1000M_F_PHY; + + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + port, + VSC73XX_MAC_CFG, + val | + VSC73XX_MAC_CFG_TX_EN | + VSC73XX_MAC_CFG_RX_EN); + + /* Flow control for the CPU port: + * Use a zero delay pause frame when pause condition is left + * Obey pause control frames + */ + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + port, + VSC73XX_FCCONF, + VSC73XX_FCCONF_ZERO_PAUSE_EN | + VSC73XX_FCCONF_FLOW_CTRL_OBEY); + + /* Issue pause control frames on PHY facing ports. + * Allow early initiation of MAC transmission if the amount + * of egress data is below 512 bytes on CPU port. + * FIXME: enable 20KiB buffers? + */ + if (port == CPU_PORT) + val = VSC73XX_Q_MISC_CONF_EARLY_TX_512; + else + val = VSC73XX_Q_MISC_CONF_MAC_PAUSE_MODE; + val |= VSC73XX_Q_MISC_CONF_EXTENT_MEM; + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + port, + VSC73XX_Q_MISC_CONF, + val); + + /* Flow control MAC: a MAC address used in flow control frames */ + val = (vsc->addr[5] << 16) | (vsc->addr[4] << 8) | (vsc->addr[3]); + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + port, + VSC73XX_FCMACHI, + val); + val = (vsc->addr[2] << 16) | (vsc->addr[1] << 8) | (vsc->addr[0]); + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + port, + VSC73XX_FCMACLO, + val); + + /* Tell the categorizer to forward pause frames, not control + * frame. Do not drop anything. + */ + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + port, + VSC73XX_CAT_DROP, + VSC73XX_CAT_DROP_FWD_PAUSE_ENA); + + /* Clear all counters */ + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + port, VSC73XX_C_RX0, 0); +} + +static void vsc73xx_adjust_enable_port(struct vsc73xx *vsc, + int port, struct phy_device *phydev, + u32 initval) +{ + u32 val = initval; + u8 seed; + + /* Reset this port FIXME: break out subroutine */ + val |= VSC73XX_MAC_CFG_RESET; + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val); + + /* Seed the port randomness with randomness */ + get_random_bytes(&seed, 1); + val |= seed << VSC73XX_MAC_CFG_SEED_OFFSET; + val |= VSC73XX_MAC_CFG_SEED_LOAD; + val |= VSC73XX_MAC_CFG_WEXC_DIS; + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, val); + + /* Flow control for the PHY facing ports: + * Use a zero delay pause frame when pause condition is left + * Obey pause control frames + * When generating pause frames, use 0xff as pause value + */ + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_FCCONF, + VSC73XX_FCCONF_ZERO_PAUSE_EN | + VSC73XX_FCCONF_FLOW_CTRL_OBEY | + 0xff); + + /* Disallow backward dropping of frames from this port */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0, + VSC73XX_SBACKWDROP, BIT(port), 0); + + /* Enable TX, RX, deassert reset, stop loading seed */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port, + VSC73XX_MAC_CFG, + VSC73XX_MAC_CFG_RESET | VSC73XX_MAC_CFG_SEED_LOAD | + VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN, + VSC73XX_MAC_CFG_TX_EN | VSC73XX_MAC_CFG_RX_EN); +} + +static void vsc73xx_adjust_link(struct dsa_switch *ds, int port, + struct phy_device *phydev) +{ + struct vsc73xx *vsc = ds->priv; + u32 val; + + /* Special handling of the CPU-facing port */ + if (port == CPU_PORT) { + /* Other ports are already initialized but not this one */ + vsc73xx_init_port(vsc, CPU_PORT); + /* Select the external port for this interface (EXT_PORT) + * Enable the GMII GTX external clock + * Use double data rate (DDR mode) + */ + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, + CPU_PORT, + VSC73XX_ADVPORTM, + VSC73XX_ADVPORTM_EXT_PORT | + VSC73XX_ADVPORTM_ENA_GTX | + VSC73XX_ADVPORTM_DDR_MODE); + } + + /* This is the MAC confiuration that always need to happen + * after a PHY or the CPU port comes up or down. + */ + if (!phydev->link) { + int maxloop = 10; + + dev_dbg(vsc->dev, "port %d: went down\n", + port); + + /* Disable RX on this port */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_MAC, port, + VSC73XX_MAC_CFG, + VSC73XX_MAC_CFG_RX_EN, 0); + + /* Discard packets */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0, + VSC73XX_ARBDISC, BIT(port), BIT(port)); + + /* Wait until queue is empty */ + vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0, + VSC73XX_ARBEMPTY, &val); + while (!(val & BIT(port))) { + msleep(1); + vsc73xx_read(vsc, VSC73XX_BLOCK_ARBITER, 0, + VSC73XX_ARBEMPTY, &val); + if (--maxloop == 0) { + dev_err(vsc->dev, + "timeout waiting for block arbiter\n"); + /* Continue anyway */ + break; + } + } + + /* Put this port into reset */ + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, VSC73XX_MAC_CFG, + VSC73XX_MAC_CFG_RESET); + + /* Accept packets again */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0, + VSC73XX_ARBDISC, BIT(port), 0); + + /* Allow backward dropping of frames from this port */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ARBITER, 0, + VSC73XX_SBACKWDROP, BIT(port), BIT(port)); + + /* Receive mask (disable forwarding) */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_RECVMASK, BIT(port), 0); + + return; + } + + /* Figure out what speed was negotiated */ + if (phydev->speed == SPEED_1000) { + dev_dbg(vsc->dev, "port %d: 1000 Mbit mode full duplex\n", + port); + + /* Set up default for internal port or external RGMII */ + if (phydev->interface == PHY_INTERFACE_MODE_RGMII) + val = VSC73XX_MAC_CFG_1000M_F_RGMII; + else + val = VSC73XX_MAC_CFG_1000M_F_PHY; + vsc73xx_adjust_enable_port(vsc, port, phydev, val); + } else if (phydev->speed == SPEED_100) { + if (phydev->duplex == DUPLEX_FULL) { + val = VSC73XX_MAC_CFG_100_10M_F_PHY; + dev_dbg(vsc->dev, + "port %d: 100 Mbit full duplex mode\n", + port); + } else { + val = VSC73XX_MAC_CFG_100_10M_H_PHY; + dev_dbg(vsc->dev, + "port %d: 100 Mbit half duplex mode\n", + port); + } + vsc73xx_adjust_enable_port(vsc, port, phydev, val); + } else if (phydev->speed == SPEED_10) { + if (phydev->duplex == DUPLEX_FULL) { + val = VSC73XX_MAC_CFG_100_10M_F_PHY; + dev_dbg(vsc->dev, + "port %d: 10 Mbit full duplex mode\n", + port); + } else { + val = VSC73XX_MAC_CFG_100_10M_H_PHY; + dev_dbg(vsc->dev, + "port %d: 10 Mbit half duplex mode\n", + port); + } + vsc73xx_adjust_enable_port(vsc, port, phydev, val); + } else { + dev_err(vsc->dev, + "could not adjust link: unknown speed\n"); + } + + /* Enable port (forwarding) in the receieve mask */ + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0, + VSC73XX_RECVMASK, BIT(port), BIT(port)); +} + +static int vsc73xx_port_enable(struct dsa_switch *ds, int port, + struct phy_device *phy) +{ + struct vsc73xx *vsc = ds->priv; + + dev_info(vsc->dev, "enable port %d\n", port); + vsc73xx_init_port(vsc, port); + + return 0; +} + +static void vsc73xx_port_disable(struct dsa_switch *ds, int port) +{ + struct vsc73xx *vsc = ds->priv; + + /* Just put the port into reset */ + vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, + VSC73XX_MAC_CFG, VSC73XX_MAC_CFG_RESET); +} + +static const struct vsc73xx_counter * +vsc73xx_find_counter(struct vsc73xx *vsc, + u8 counter, + bool tx) +{ + const struct vsc73xx_counter *cnts; + int num_cnts; + int i; + + if (tx) { + cnts = vsc73xx_tx_counters; + num_cnts = ARRAY_SIZE(vsc73xx_tx_counters); + } else { + cnts = vsc73xx_rx_counters; + num_cnts = ARRAY_SIZE(vsc73xx_rx_counters); + } + + for (i = 0; i < num_cnts; i++) { + const struct vsc73xx_counter *cnt; + + cnt = &cnts[i]; + if (cnt->counter == counter) + return cnt; + } + + return NULL; +} + +static void vsc73xx_get_strings(struct dsa_switch *ds, int port, u32 stringset, + uint8_t *data) +{ + const struct vsc73xx_counter *cnt; + struct vsc73xx *vsc = ds->priv; + u8 indices[6]; + int i, j; + u32 val; + int ret; + + if (stringset != ETH_SS_STATS) + return; + + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port, + VSC73XX_C_CFG, &val); + if (ret) + return; + + indices[0] = (val & 0x1f); /* RX counter 0 */ + indices[1] = ((val >> 5) & 0x1f); /* RX counter 1 */ + indices[2] = ((val >> 10) & 0x1f); /* RX counter 2 */ + indices[3] = ((val >> 16) & 0x1f); /* TX counter 0 */ + indices[4] = ((val >> 21) & 0x1f); /* TX counter 1 */ + indices[5] = ((val >> 26) & 0x1f); /* TX counter 2 */ + + /* The first counters is the RX octets */ + j = 0; + strncpy(data + j * ETH_GSTRING_LEN, + "RxEtherStatsOctets", ETH_GSTRING_LEN); + j++; + + /* Each port supports recording 3 RX counters and 3 TX counters, + * figure out what counters we use in this set-up and return the + * names of them. The hardware default counters will be number of + * packets on RX/TX, combined broadcast+multicast packets RX/TX and + * total error packets RX/TX. + */ + for (i = 0; i < 3; i++) { + cnt = vsc73xx_find_counter(vsc, indices[i], false); + if (cnt) + strncpy(data + j * ETH_GSTRING_LEN, + cnt->name, ETH_GSTRING_LEN); + j++; + } + + /* TX stats begins with the number of TX octets */ + strncpy(data + j * ETH_GSTRING_LEN, + "TxEtherStatsOctets", ETH_GSTRING_LEN); + j++; + + for (i = 3; i < 6; i++) { + cnt = vsc73xx_find_counter(vsc, indices[i], true); + if (cnt) + strncpy(data + j * ETH_GSTRING_LEN, + cnt->name, ETH_GSTRING_LEN); + j++; + } +} + +static int vsc73xx_get_sset_count(struct dsa_switch *ds, int port, int sset) +{ + /* We only support SS_STATS */ + if (sset != ETH_SS_STATS) + return 0; + /* RX and TX packets, then 3 RX counters, 3 TX counters */ + return 8; +} + +static void vsc73xx_get_ethtool_stats(struct dsa_switch *ds, int port, + uint64_t *data) +{ + struct vsc73xx *vsc = ds->priv; + u8 regs[] = { + VSC73XX_RXOCT, + VSC73XX_C_RX0, + VSC73XX_C_RX1, + VSC73XX_C_RX2, + VSC73XX_TXOCT, + VSC73XX_C_TX0, + VSC73XX_C_TX1, + VSC73XX_C_TX2, + }; + u32 val; + int ret; + int i; + + for (i = 0; i < ARRAY_SIZE(regs); i++) { + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_MAC, port, + regs[i], &val); + if (ret) { + dev_err(vsc->dev, "error reading counter %d\n", i); + return; + } + data[i] = val; + } +} + +static int vsc73xx_change_mtu(struct dsa_switch *ds, int port, int new_mtu) +{ + struct vsc73xx *vsc = ds->priv; + + return vsc73xx_write(vsc, VSC73XX_BLOCK_MAC, port, + VSC73XX_MAXLEN, new_mtu + ETH_HLEN + ETH_FCS_LEN); +} + +/* According to application not "VSC7398 Jumbo Frames" setting + * up the frame size to 9.6 KB does not affect the performance on standard + * frames. It is clear from the application note that + * "9.6 kilobytes" == 9600 bytes. + */ +static int vsc73xx_get_max_mtu(struct dsa_switch *ds, int port) +{ + return 9600 - ETH_HLEN - ETH_FCS_LEN; +} + +static const struct dsa_switch_ops vsc73xx_ds_ops = { + .get_tag_protocol = vsc73xx_get_tag_protocol, + .setup = vsc73xx_setup, + .phy_read = vsc73xx_phy_read, + .phy_write = vsc73xx_phy_write, + .adjust_link = vsc73xx_adjust_link, + .get_strings = vsc73xx_get_strings, + .get_ethtool_stats = vsc73xx_get_ethtool_stats, + .get_sset_count = vsc73xx_get_sset_count, + .port_enable = vsc73xx_port_enable, + .port_disable = vsc73xx_port_disable, + .port_change_mtu = vsc73xx_change_mtu, + .port_max_mtu = vsc73xx_get_max_mtu, +}; + +static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct vsc73xx *vsc = gpiochip_get_data(chip); + u32 val; + int ret; + + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, + VSC73XX_GPIO, &val); + if (ret) + return ret; + + return !!(val & BIT(offset)); +} + +static void vsc73xx_gpio_set(struct gpio_chip *chip, unsigned int offset, + int val) +{ + struct vsc73xx *vsc = gpiochip_get_data(chip); + u32 tmp = val ? BIT(offset) : 0; + + vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0, + VSC73XX_GPIO, BIT(offset), tmp); +} + +static int vsc73xx_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int val) +{ + struct vsc73xx *vsc = gpiochip_get_data(chip); + u32 tmp = val ? BIT(offset) : 0; + + return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0, + VSC73XX_GPIO, BIT(offset + 4) | BIT(offset), + BIT(offset + 4) | tmp); +} + +static int vsc73xx_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct vsc73xx *vsc = gpiochip_get_data(chip); + + return vsc73xx_update_bits(vsc, VSC73XX_BLOCK_SYSTEM, 0, + VSC73XX_GPIO, BIT(offset + 4), + 0); +} + +static int vsc73xx_gpio_get_direction(struct gpio_chip *chip, + unsigned int offset) +{ + struct vsc73xx *vsc = gpiochip_get_data(chip); + u32 val; + int ret; + + ret = vsc73xx_read(vsc, VSC73XX_BLOCK_SYSTEM, 0, + VSC73XX_GPIO, &val); + if (ret) + return ret; + + return !(val & BIT(offset + 4)); +} + +static int vsc73xx_gpio_probe(struct vsc73xx *vsc) +{ + int ret; + + vsc->gc.label = devm_kasprintf(vsc->dev, GFP_KERNEL, "VSC%04x", + vsc->chipid); + if (!vsc->gc.label) + return -ENOMEM; + vsc->gc.ngpio = 4; + vsc->gc.owner = THIS_MODULE; + vsc->gc.parent = vsc->dev; + vsc->gc.base = -1; + vsc->gc.get = vsc73xx_gpio_get; + vsc->gc.set = vsc73xx_gpio_set; + vsc->gc.direction_input = vsc73xx_gpio_direction_input; + vsc->gc.direction_output = vsc73xx_gpio_direction_output; + vsc->gc.get_direction = vsc73xx_gpio_get_direction; + vsc->gc.can_sleep = true; + ret = devm_gpiochip_add_data(vsc->dev, &vsc->gc, vsc); + if (ret) { + dev_err(vsc->dev, "unable to register GPIO chip\n"); + return ret; + } + return 0; +} + +int vsc73xx_probe(struct vsc73xx *vsc) +{ + struct device *dev = vsc->dev; + int ret; + + /* Release reset, if any */ + vsc->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(vsc->reset)) { + dev_err(dev, "failed to get RESET GPIO\n"); + return PTR_ERR(vsc->reset); + } + if (vsc->reset) + /* Wait 20ms according to datasheet table 245 */ + msleep(20); + + ret = vsc73xx_detect(vsc); + if (ret == -EAGAIN) { + dev_err(vsc->dev, + "Chip seems to be out of control. Assert reset and try again.\n"); + gpiod_set_value_cansleep(vsc->reset, 1); + /* Reset pulse should be 20ns minimum, according to datasheet + * table 245, so 10us should be fine + */ + usleep_range(10, 100); + gpiod_set_value_cansleep(vsc->reset, 0); + /* Wait 20ms according to datasheet table 245 */ + msleep(20); + ret = vsc73xx_detect(vsc); + } + if (ret) { + dev_err(dev, "no chip found (%d)\n", ret); + return -ENODEV; + } + + eth_random_addr(vsc->addr); + dev_info(vsc->dev, + "MAC for control frames: %02X:%02X:%02X:%02X:%02X:%02X\n", + vsc->addr[0], vsc->addr[1], vsc->addr[2], + vsc->addr[3], vsc->addr[4], vsc->addr[5]); + + /* The VSC7395 switch chips have 5+1 ports which means 5 + * ordinary ports and a sixth CPU port facing the processor + * with an RGMII interface. These ports are numbered 0..4 + * and 6, so they leave a "hole" in the port map for port 5, + * which is invalid. + * + * The VSC7398 has 8 ports, port 7 is again the CPU port. + * + * We allocate 8 ports and avoid access to the nonexistant + * ports. + */ + vsc->ds = devm_kzalloc(dev, sizeof(*vsc->ds), GFP_KERNEL); + if (!vsc->ds) + return -ENOMEM; + + vsc->ds->dev = dev; + vsc->ds->num_ports = 8; + vsc->ds->priv = vsc; + + vsc->ds->ops = &vsc73xx_ds_ops; + ret = dsa_register_switch(vsc->ds); + if (ret) { + dev_err(dev, "unable to register switch (%d)\n", ret); + return ret; + } + + ret = vsc73xx_gpio_probe(vsc); + if (ret) { + dsa_unregister_switch(vsc->ds); + return ret; + } + + return 0; +} +EXPORT_SYMBOL(vsc73xx_probe); + +void vsc73xx_remove(struct vsc73xx *vsc) +{ + dsa_unregister_switch(vsc->ds); + gpiod_set_value(vsc->reset, 1); +} +EXPORT_SYMBOL(vsc73xx_remove); + +void vsc73xx_shutdown(struct vsc73xx *vsc) +{ + dsa_switch_shutdown(vsc->ds); +} +EXPORT_SYMBOL(vsc73xx_shutdown); + +MODULE_AUTHOR("Linus Walleij "); +MODULE_DESCRIPTION("Vitesse VSC7385/7388/7395/7398 driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3