From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/net/ethernet/8390/zorro8390.c | 451 ++++++++++++++++++++++++++++++++++ 1 file changed, 451 insertions(+) create mode 100644 drivers/net/ethernet/8390/zorro8390.c (limited to 'drivers/net/ethernet/8390/zorro8390.c') diff --git a/drivers/net/ethernet/8390/zorro8390.c b/drivers/net/ethernet/8390/zorro8390.c new file mode 100644 index 000000000..e8b4fe813 --- /dev/null +++ b/drivers/net/ethernet/8390/zorro8390.c @@ -0,0 +1,451 @@ +/* + * Amiga Linux/m68k and Linux/PPC Zorro NS8390 Ethernet Driver + * + * (C) Copyright 1998-2000 by some Elitist 680x0 Users(TM) + * + * --------------------------------------------------------------------------- + * + * This program is based on all the other NE2000 drivers for Linux + * + * --------------------------------------------------------------------------- + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of the Linux + * distribution for more details. + * + * --------------------------------------------------------------------------- + * + * The Ariadne II and X-Surf are Zorro-II boards containing Realtek RTL8019AS + * Ethernet Controllers. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define EI_SHIFT(x) (ei_local->reg_offset[x]) +#define ei_inb(port) in_8(port) +#define ei_outb(val, port) out_8(port, val) +#define ei_inb_p(port) in_8(port) +#define ei_outb_p(val, port) out_8(port, val) + +static const char version[] = + "8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; + +#include "lib8390.c" + +#define DRV_NAME "zorro8390" + +#define NE_BASE (dev->base_addr) +#define NE_CMD (0x00 * 2) +#define NE_DATAPORT (0x10 * 2) /* NatSemi-defined port window offset */ +#define NE_RESET (0x1f * 2) /* Issue a read to reset, + * a write to clear. */ +#define NE_IO_EXTENT (0x20 * 2) + +#define NE_EN0_ISR (0x07 * 2) +#define NE_EN0_DCFG (0x0e * 2) + +#define NE_EN0_RSARLO (0x08 * 2) +#define NE_EN0_RSARHI (0x09 * 2) +#define NE_EN0_RCNTLO (0x0a * 2) +#define NE_EN0_RXCR (0x0c * 2) +#define NE_EN0_TXCR (0x0d * 2) +#define NE_EN0_RCNTHI (0x0b * 2) +#define NE_EN0_IMR (0x0f * 2) + +#define NESM_START_PG 0x40 /* First page of TX buffer */ +#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */ + +#define WORDSWAP(a) ((((a) >> 8) & 0xff) | ((a) << 8)) + +static struct card_info { + zorro_id id; + const char *name; + unsigned int offset; +} cards[] = { + { ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2, "Ariadne II", 0x0600 }, + { ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, "X-Surf", 0x8600 }, +}; + +/* Hard reset the card. This used to pause for the same period that a + * 8390 reset command required, but that shouldn't be necessary. + */ +static void zorro8390_reset_8390(struct net_device *dev) +{ + unsigned long reset_start_time = jiffies; + struct ei_device *ei_local = netdev_priv(dev); + + netif_dbg(ei_local, hw, dev, "resetting - t=%ld...\n", jiffies); + + z_writeb(z_readb(NE_BASE + NE_RESET), NE_BASE + NE_RESET); + + ei_status.txing = 0; + ei_status.dmaing = 0; + + /* This check _should_not_ be necessary, omit eventually. */ + while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RESET) == 0) + if (time_after(jiffies, reset_start_time + 2 * HZ / 100)) { + netdev_warn(dev, "%s: did not complete\n", __func__); + break; + } + z_writeb(ENISR_RESET, NE_BASE + NE_EN0_ISR); /* Ack intr */ +} + +/* Grab the 8390 specific header. Similar to the block_input routine, but + * we don't need to be concerned with ring wrap as the header will be at + * the start of a page, so we optimize accordingly. + */ +static void zorro8390_get_8390_hdr(struct net_device *dev, + struct e8390_pkt_hdr *hdr, int ring_page) +{ + int nic_base = dev->base_addr; + int cnt; + short *ptrs; + + /* This *shouldn't* happen. + * If it does, it's the last thing you'll see + */ + if (ei_status.dmaing) { + netdev_warn(dev, + "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n", + __func__, ei_status.dmaing, ei_status.irqlock); + return; + } + + ei_status.dmaing |= 0x01; + z_writeb(E8390_NODMA + E8390_PAGE0 + E8390_START, nic_base + NE_CMD); + z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); + z_writeb(sizeof(struct e8390_pkt_hdr), nic_base + NE_EN0_RCNTLO); + z_writeb(0, nic_base + NE_EN0_RCNTHI); + z_writeb(0, nic_base + NE_EN0_RSARLO); /* On page boundary */ + z_writeb(ring_page, nic_base + NE_EN0_RSARHI); + z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD); + + ptrs = (short *)hdr; + for (cnt = 0; cnt < sizeof(struct e8390_pkt_hdr) >> 1; cnt++) + *ptrs++ = z_readw(NE_BASE + NE_DATAPORT); + + z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr */ + + hdr->count = WORDSWAP(hdr->count); + + ei_status.dmaing &= ~0x01; +} + +/* Block input and output, similar to the Crynwr packet driver. + * If you are porting to a new ethercard, look at the packet driver source + * for hints. The NEx000 doesn't share the on-board packet memory -- + * you have to put the packet out through the "remote DMA" dataport + * using z_writeb. + */ +static void zorro8390_block_input(struct net_device *dev, int count, + struct sk_buff *skb, int ring_offset) +{ + int nic_base = dev->base_addr; + char *buf = skb->data; + short *ptrs; + int cnt; + + /* This *shouldn't* happen. + * If it does, it's the last thing you'll see + */ + if (ei_status.dmaing) { + netdev_err(dev, "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n", + __func__, ei_status.dmaing, ei_status.irqlock); + return; + } + ei_status.dmaing |= 0x01; + z_writeb(E8390_NODMA + E8390_PAGE0 + E8390_START, nic_base + NE_CMD); + z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); + z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO); + z_writeb(count >> 8, nic_base + NE_EN0_RCNTHI); + z_writeb(ring_offset & 0xff, nic_base + NE_EN0_RSARLO); + z_writeb(ring_offset >> 8, nic_base + NE_EN0_RSARHI); + z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD); + ptrs = (short *)buf; + for (cnt = 0; cnt < count >> 1; cnt++) + *ptrs++ = z_readw(NE_BASE + NE_DATAPORT); + if (count & 0x01) + buf[count - 1] = z_readb(NE_BASE + NE_DATAPORT); + + z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr */ + ei_status.dmaing &= ~0x01; +} + +static void zorro8390_block_output(struct net_device *dev, int count, + const unsigned char *buf, + const int start_page) +{ + int nic_base = NE_BASE; + unsigned long dma_start; + short *ptrs; + int cnt; + + /* Round the count up for word writes. Do we need to do this? + * What effect will an odd byte count have on the 8390? + * I should check someday. + */ + if (count & 0x01) + count++; + + /* This *shouldn't* happen. + * If it does, it's the last thing you'll see + */ + if (ei_status.dmaing) { + netdev_err(dev, "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n", + __func__, ei_status.dmaing, ei_status.irqlock); + return; + } + ei_status.dmaing |= 0x01; + /* We should already be in page 0, but to be safe... */ + z_writeb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD); + + z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); + + /* Now the normal output. */ + z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO); + z_writeb(count >> 8, nic_base + NE_EN0_RCNTHI); + z_writeb(0x00, nic_base + NE_EN0_RSARLO); + z_writeb(start_page, nic_base + NE_EN0_RSARHI); + + z_writeb(E8390_RWRITE + E8390_START, nic_base + NE_CMD); + ptrs = (short *)buf; + for (cnt = 0; cnt < count >> 1; cnt++) + z_writew(*ptrs++, NE_BASE + NE_DATAPORT); + + dma_start = jiffies; + + while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0) + if (time_after(jiffies, dma_start + 2 * HZ / 100)) { + /* 20ms */ + netdev_warn(dev, "timeout waiting for Tx RDC\n"); + zorro8390_reset_8390(dev); + __NS8390_init(dev, 1); + break; + } + + z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr */ + ei_status.dmaing &= ~0x01; +} + +static int zorro8390_open(struct net_device *dev) +{ + __ei_open(dev); + return 0; +} + +static int zorro8390_close(struct net_device *dev) +{ + struct ei_device *ei_local = netdev_priv(dev); + + netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard\n"); + __ei_close(dev); + return 0; +} + +static void zorro8390_remove_one(struct zorro_dev *z) +{ + struct net_device *dev = zorro_get_drvdata(z); + + unregister_netdev(dev); + free_irq(IRQ_AMIGA_PORTS, dev); + release_mem_region(ZTWO_PADDR(dev->base_addr), NE_IO_EXTENT * 2); + free_netdev(dev); +} + +static struct zorro_device_id zorro8390_zorro_tbl[] = { + { ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2, }, + { ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, }, + { 0 } +}; +MODULE_DEVICE_TABLE(zorro, zorro8390_zorro_tbl); + +static const struct net_device_ops zorro8390_netdev_ops = { + .ndo_open = zorro8390_open, + .ndo_stop = zorro8390_close, + .ndo_start_xmit = __ei_start_xmit, + .ndo_tx_timeout = __ei_tx_timeout, + .ndo_get_stats = __ei_get_stats, + .ndo_set_rx_mode = __ei_set_multicast_list, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = __ei_poll, +#endif +}; + +static int zorro8390_init(struct net_device *dev, unsigned long board, + const char *name, void __iomem *ioaddr) +{ + int i; + int err; + unsigned char SA_prom[32]; + int start_page, stop_page; + static u32 zorro8390_offsets[16] = { + 0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e, + 0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e, + }; + + /* Reset card. Who knows what dain-bramaged state it was left in. */ + { + unsigned long reset_start_time = jiffies; + + z_writeb(z_readb(ioaddr + NE_RESET), ioaddr + NE_RESET); + + while ((z_readb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0) + if (time_after(jiffies, + reset_start_time + 2 * HZ / 100)) { + netdev_warn(dev, "not found (no reset ack)\n"); + return -ENODEV; + } + + z_writeb(0xff, ioaddr + NE_EN0_ISR); /* Ack all intr. */ + } + + /* Read the 16 bytes of station address PROM. + * We must first initialize registers, + * similar to NS8390_init(eifdev, 0). + * We can't reliably read the SAPROM address without this. + * (I learned the hard way!). + */ + { + static const struct { + u32 value; + u32 offset; + } program_seq[] = { + {E8390_NODMA + E8390_PAGE0 + E8390_STOP, NE_CMD}, + /* Select page 0 */ + {0x48, NE_EN0_DCFG}, /* 0x48: Set byte-wide access */ + {0x00, NE_EN0_RCNTLO}, /* Clear the count regs */ + {0x00, NE_EN0_RCNTHI}, + {0x00, NE_EN0_IMR}, /* Mask completion irq */ + {0xFF, NE_EN0_ISR}, + {E8390_RXOFF, NE_EN0_RXCR}, /* 0x20 Set to monitor */ + {E8390_TXOFF, NE_EN0_TXCR}, /* 0x02 and loopback mode */ + {32, NE_EN0_RCNTLO}, + {0x00, NE_EN0_RCNTHI}, + {0x00, NE_EN0_RSARLO}, /* DMA starting at 0x0000 */ + {0x00, NE_EN0_RSARHI}, + {E8390_RREAD + E8390_START, NE_CMD}, + }; + for (i = 0; i < ARRAY_SIZE(program_seq); i++) + z_writeb(program_seq[i].value, + ioaddr + program_seq[i].offset); + } + for (i = 0; i < 16; i++) { + SA_prom[i] = z_readb(ioaddr + NE_DATAPORT); + (void)z_readb(ioaddr + NE_DATAPORT); + } + + /* We must set the 8390 for word mode. */ + z_writeb(0x49, ioaddr + NE_EN0_DCFG); + start_page = NESM_START_PG; + stop_page = NESM_STOP_PG; + + dev->base_addr = (unsigned long)ioaddr; + dev->irq = IRQ_AMIGA_PORTS; + + /* Install the Interrupt handler */ + i = request_irq(IRQ_AMIGA_PORTS, __ei_interrupt, + IRQF_SHARED, DRV_NAME, dev); + if (i) + return i; + + eth_hw_addr_set(dev, SA_prom); + + pr_debug("Found ethernet address: %pM\n", dev->dev_addr); + + ei_status.name = name; + ei_status.tx_start_page = start_page; + ei_status.stop_page = stop_page; + ei_status.word16 = 1; + + ei_status.rx_start_page = start_page + TX_PAGES; + + ei_status.reset_8390 = zorro8390_reset_8390; + ei_status.block_input = zorro8390_block_input; + ei_status.block_output = zorro8390_block_output; + ei_status.get_8390_hdr = zorro8390_get_8390_hdr; + ei_status.reg_offset = zorro8390_offsets; + + dev->netdev_ops = &zorro8390_netdev_ops; + __NS8390_init(dev, 0); + + err = register_netdev(dev); + if (err) { + free_irq(IRQ_AMIGA_PORTS, dev); + return err; + } + + netdev_info(dev, "%s at 0x%08lx, Ethernet Address %pM\n", + name, board, dev->dev_addr); + + return 0; +} + +static int zorro8390_init_one(struct zorro_dev *z, + const struct zorro_device_id *ent) +{ + struct net_device *dev; + unsigned long board, ioaddr; + int err, i; + + for (i = ARRAY_SIZE(cards) - 1; i >= 0; i--) + if (z->id == cards[i].id) + break; + if (i < 0) + return -ENODEV; + + board = z->resource.start; + ioaddr = board + cards[i].offset; + dev = ____alloc_ei_netdev(0); + if (!dev) + return -ENOMEM; + if (!request_mem_region(ioaddr, NE_IO_EXTENT * 2, DRV_NAME)) { + free_netdev(dev); + return -EBUSY; + } + err = zorro8390_init(dev, board, cards[i].name, ZTWO_VADDR(ioaddr)); + if (err) { + release_mem_region(ioaddr, NE_IO_EXTENT * 2); + free_netdev(dev); + return err; + } + zorro_set_drvdata(z, dev); + return 0; +} + +static struct zorro_driver zorro8390_driver = { + .name = "zorro8390", + .id_table = zorro8390_zorro_tbl, + .probe = zorro8390_init_one, + .remove = zorro8390_remove_one, +}; + +static int __init zorro8390_init_module(void) +{ + return zorro_register_driver(&zorro8390_driver); +} + +static void __exit zorro8390_cleanup_module(void) +{ + zorro_unregister_driver(&zorro8390_driver); +} + +module_init(zorro8390_init_module); +module_exit(zorro8390_cleanup_module); + +MODULE_LICENSE("GPL"); -- cgit v1.2.3