From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/phy/st/phy-stm32-usbphyc.c | 824 +++++++++++++++++++++++++++++++++++++ 1 file changed, 824 insertions(+) create mode 100644 drivers/phy/st/phy-stm32-usbphyc.c (limited to 'drivers/phy/st/phy-stm32-usbphyc.c') diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c new file mode 100644 index 000000000..5bb9647b0 --- /dev/null +++ b/drivers/phy/st/phy-stm32-usbphyc.c @@ -0,0 +1,824 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * STMicroelectronics STM32 USB PHY Controller driver + * + * Copyright (C) 2018 STMicroelectronics + * Author(s): Amelie Delaunay . + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define STM32_USBPHYC_PLL 0x0 +#define STM32_USBPHYC_MISC 0x8 +#define STM32_USBPHYC_MONITOR(X) (0x108 + ((X) * 0x100)) +#define STM32_USBPHYC_TUNE(X) (0x10C + ((X) * 0x100)) +#define STM32_USBPHYC_VERSION 0x3F4 + +/* STM32_USBPHYC_PLL bit fields */ +#define PLLNDIV GENMASK(6, 0) +#define PLLFRACIN GENMASK(25, 10) +#define PLLEN BIT(26) +#define PLLSTRB BIT(27) +#define PLLSTRBYP BIT(28) +#define PLLFRACCTL BIT(29) +#define PLLDITHEN0 BIT(30) +#define PLLDITHEN1 BIT(31) + +/* STM32_USBPHYC_MISC bit fields */ +#define SWITHOST BIT(0) + +/* STM32_USBPHYC_MONITOR bit fields */ +#define STM32_USBPHYC_MON_OUT GENMASK(3, 0) +#define STM32_USBPHYC_MON_SEL GENMASK(8, 4) +#define STM32_USBPHYC_MON_SEL_LOCKP 0x1F +#define STM32_USBPHYC_MON_OUT_LOCKP BIT(3) + +/* STM32_USBPHYC_TUNE bit fields */ +#define INCURREN BIT(0) +#define INCURRINT BIT(1) +#define LFSCAPEN BIT(2) +#define HSDRVSLEW BIT(3) +#define HSDRVDCCUR BIT(4) +#define HSDRVDCLEV BIT(5) +#define HSDRVCURINCR BIT(6) +#define FSDRVRFADJ BIT(7) +#define HSDRVRFRED BIT(8) +#define HSDRVCHKITRM GENMASK(12, 9) +#define HSDRVCHKZTRM GENMASK(14, 13) +#define OTPCOMP GENMASK(19, 15) +#define SQLCHCTL GENMASK(21, 20) +#define HDRXGNEQEN BIT(22) +#define HSRXOFF GENMASK(24, 23) +#define HSFALLPREEM BIT(25) +#define SHTCCTCTLPROT BIT(26) +#define STAGSEL BIT(27) + +enum boosting_vals { + BOOST_1000_UA = 1000, + BOOST_2000_UA = 2000, +}; + +enum dc_level_vals { + DC_NOMINAL, + DC_PLUS_5_TO_7_MV, + DC_PLUS_10_TO_14_MV, + DC_MINUS_5_TO_7_MV, + DC_MAX, +}; + +enum current_trim { + CUR_NOMINAL, + CUR_PLUS_1_56_PCT, + CUR_PLUS_3_12_PCT, + CUR_PLUS_4_68_PCT, + CUR_PLUS_6_24_PCT, + CUR_PLUS_7_8_PCT, + CUR_PLUS_9_36_PCT, + CUR_PLUS_10_92_PCT, + CUR_PLUS_12_48_PCT, + CUR_PLUS_14_04_PCT, + CUR_PLUS_15_6_PCT, + CUR_PLUS_17_16_PCT, + CUR_PLUS_19_01_PCT, + CUR_PLUS_20_58_PCT, + CUR_PLUS_22_16_PCT, + CUR_PLUS_23_73_PCT, + CUR_MAX, +}; + +enum impedance_trim { + IMP_NOMINAL, + IMP_MINUS_2_OHMS, + IMP_MINUS_4_OMHS, + IMP_MINUS_6_OHMS, + IMP_MAX, +}; + +enum squelch_level { + SQLCH_NOMINAL, + SQLCH_PLUS_7_MV, + SQLCH_MINUS_5_MV, + SQLCH_PLUS_14_MV, + SQLCH_MAX, +}; + +enum rx_offset { + NO_RX_OFFSET, + RX_OFFSET_PLUS_5_MV, + RX_OFFSET_PLUS_10_MV, + RX_OFFSET_MINUS_5_MV, + RX_OFFSET_MAX, +}; + +/* STM32_USBPHYC_VERSION bit fields */ +#define MINREV GENMASK(3, 0) +#define MAJREV GENMASK(7, 4) + +#define PLL_FVCO_MHZ 2880 +#define PLL_INFF_MIN_RATE_HZ 19200000 +#define PLL_INFF_MAX_RATE_HZ 38400000 + +struct pll_params { + u8 ndiv; + u16 frac; +}; + +struct stm32_usbphyc_phy { + struct phy *phy; + struct stm32_usbphyc *usbphyc; + struct regulator *vbus; + u32 index; + bool active; + u32 tune; +}; + +struct stm32_usbphyc { + struct device *dev; + void __iomem *base; + struct clk *clk; + struct reset_control *rst; + struct stm32_usbphyc_phy **phys; + int nphys; + struct regulator *vdda1v1; + struct regulator *vdda1v8; + atomic_t n_pll_cons; + struct clk_hw clk48_hw; + int switch_setup; +}; + +static inline void stm32_usbphyc_set_bits(void __iomem *reg, u32 bits) +{ + writel_relaxed(readl_relaxed(reg) | bits, reg); +} + +static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits) +{ + writel_relaxed(readl_relaxed(reg) & ~bits, reg); +} + +static int stm32_usbphyc_regulators_enable(struct stm32_usbphyc *usbphyc) +{ + int ret; + + ret = regulator_enable(usbphyc->vdda1v1); + if (ret) + return ret; + + ret = regulator_enable(usbphyc->vdda1v8); + if (ret) + goto vdda1v1_disable; + + return 0; + +vdda1v1_disable: + regulator_disable(usbphyc->vdda1v1); + + return ret; +} + +static int stm32_usbphyc_regulators_disable(struct stm32_usbphyc *usbphyc) +{ + int ret; + + ret = regulator_disable(usbphyc->vdda1v8); + if (ret) + return ret; + + ret = regulator_disable(usbphyc->vdda1v1); + if (ret) + return ret; + + return 0; +} + +static void stm32_usbphyc_get_pll_params(u32 clk_rate, + struct pll_params *pll_params) +{ + unsigned long long fvco, ndiv, frac; + + /* _ + * | FVCO = INFF*2*(NDIV + FRACT/2^16) when DITHER_DISABLE[1] = 1 + * | FVCO = 2880MHz + * < + * | NDIV = integer part of input bits to set the LDF + * |_FRACT = fractional part of input bits to set the LDF + * => PLLNDIV = integer part of (FVCO / (INFF*2)) + * => PLLFRACIN = fractional part of(FVCO / INFF*2) * 2^16 + * <=> PLLFRACIN = ((FVCO / (INFF*2)) - PLLNDIV) * 2^16 + */ + fvco = (unsigned long long)PLL_FVCO_MHZ * HZ_PER_MHZ; + + ndiv = fvco; + do_div(ndiv, (clk_rate * 2)); + pll_params->ndiv = (u8)ndiv; + + frac = fvco * (1 << 16); + do_div(frac, (clk_rate * 2)); + frac = frac - (ndiv * (1 << 16)); + pll_params->frac = (u16)frac; +} + +static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc) +{ + struct pll_params pll_params; + u32 clk_rate = clk_get_rate(usbphyc->clk); + u32 ndiv, frac; + u32 usbphyc_pll; + + if ((clk_rate < PLL_INFF_MIN_RATE_HZ) || + (clk_rate > PLL_INFF_MAX_RATE_HZ)) { + dev_err(usbphyc->dev, "input clk freq (%dHz) out of range\n", + clk_rate); + return -EINVAL; + } + + stm32_usbphyc_get_pll_params(clk_rate, &pll_params); + ndiv = FIELD_PREP(PLLNDIV, pll_params.ndiv); + frac = FIELD_PREP(PLLFRACIN, pll_params.frac); + + usbphyc_pll = PLLDITHEN1 | PLLDITHEN0 | PLLSTRBYP | ndiv; + + if (pll_params.frac) + usbphyc_pll |= PLLFRACCTL | frac; + + writel_relaxed(usbphyc_pll, usbphyc->base + STM32_USBPHYC_PLL); + + dev_dbg(usbphyc->dev, "input clk freq=%dHz, ndiv=%lu, frac=%lu\n", + clk_rate, FIELD_GET(PLLNDIV, usbphyc_pll), + FIELD_GET(PLLFRACIN, usbphyc_pll)); + + return 0; +} + +static int __stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) +{ + void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL; + u32 pllen; + + stm32_usbphyc_clr_bits(pll_reg, PLLEN); + + /* Wait for minimum width of powerdown pulse (ENABLE = Low) */ + if (readl_relaxed_poll_timeout(pll_reg, pllen, !(pllen & PLLEN), 5, 50)) + dev_err(usbphyc->dev, "PLL not reset\n"); + + return stm32_usbphyc_regulators_disable(usbphyc); +} + +static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) +{ + /* Check if a phy port is still active or clk48 in use */ + if (atomic_dec_return(&usbphyc->n_pll_cons) > 0) + return 0; + + return __stm32_usbphyc_pll_disable(usbphyc); +} + +static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) +{ + void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL; + bool pllen = readl_relaxed(pll_reg) & PLLEN; + int ret; + + /* + * Check if a phy port or clk48 prepare has configured the pll + * and ensure the PLL is enabled + */ + if (atomic_inc_return(&usbphyc->n_pll_cons) > 1 && pllen) + return 0; + + if (pllen) { + /* + * PLL shouldn't be enabled without known consumer, + * disable it and reinit n_pll_cons + */ + dev_warn(usbphyc->dev, "PLL enabled without known consumers\n"); + + ret = __stm32_usbphyc_pll_disable(usbphyc); + if (ret) + goto dec_n_pll_cons; + } + + ret = stm32_usbphyc_regulators_enable(usbphyc); + if (ret) + goto dec_n_pll_cons; + + ret = stm32_usbphyc_pll_init(usbphyc); + if (ret) + goto reg_disable; + + stm32_usbphyc_set_bits(pll_reg, PLLEN); + + return 0; + +reg_disable: + stm32_usbphyc_regulators_disable(usbphyc); + +dec_n_pll_cons: + atomic_dec(&usbphyc->n_pll_cons); + + return ret; +} + +static int stm32_usbphyc_phy_init(struct phy *phy) +{ + struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); + struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc; + u32 reg_mon = STM32_USBPHYC_MONITOR(usbphyc_phy->index); + u32 monsel = FIELD_PREP(STM32_USBPHYC_MON_SEL, + STM32_USBPHYC_MON_SEL_LOCKP); + u32 monout; + int ret; + + ret = stm32_usbphyc_pll_enable(usbphyc); + if (ret) + return ret; + + /* Check that PLL Lock input to PHY is High */ + writel_relaxed(monsel, usbphyc->base + reg_mon); + ret = readl_relaxed_poll_timeout(usbphyc->base + reg_mon, monout, + (monout & STM32_USBPHYC_MON_OUT_LOCKP), + 100, 1000); + if (ret) { + dev_err(usbphyc->dev, "PLL Lock input to PHY is Low (val=%x)\n", + (u32)(monout & STM32_USBPHYC_MON_OUT)); + goto pll_disable; + } + + usbphyc_phy->active = true; + + return 0; + +pll_disable: + stm32_usbphyc_pll_disable(usbphyc); + + return ret; +} + +static int stm32_usbphyc_phy_exit(struct phy *phy) +{ + struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); + struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc; + + usbphyc_phy->active = false; + + return stm32_usbphyc_pll_disable(usbphyc); +} + +static int stm32_usbphyc_phy_power_on(struct phy *phy) +{ + struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); + + if (usbphyc_phy->vbus) + return regulator_enable(usbphyc_phy->vbus); + + return 0; +} + +static int stm32_usbphyc_phy_power_off(struct phy *phy) +{ + struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); + + if (usbphyc_phy->vbus) + return regulator_disable(usbphyc_phy->vbus); + + return 0; +} + +static const struct phy_ops stm32_usbphyc_phy_ops = { + .init = stm32_usbphyc_phy_init, + .exit = stm32_usbphyc_phy_exit, + .power_on = stm32_usbphyc_phy_power_on, + .power_off = stm32_usbphyc_phy_power_off, + .owner = THIS_MODULE, +}; + +static int stm32_usbphyc_clk48_prepare(struct clk_hw *hw) +{ + struct stm32_usbphyc *usbphyc = container_of(hw, struct stm32_usbphyc, clk48_hw); + + return stm32_usbphyc_pll_enable(usbphyc); +} + +static void stm32_usbphyc_clk48_unprepare(struct clk_hw *hw) +{ + struct stm32_usbphyc *usbphyc = container_of(hw, struct stm32_usbphyc, clk48_hw); + + stm32_usbphyc_pll_disable(usbphyc); +} + +static unsigned long stm32_usbphyc_clk48_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + return 48000000; +} + +static const struct clk_ops usbphyc_clk48_ops = { + .prepare = stm32_usbphyc_clk48_prepare, + .unprepare = stm32_usbphyc_clk48_unprepare, + .recalc_rate = stm32_usbphyc_clk48_recalc_rate, +}; + +static void stm32_usbphyc_clk48_unregister(void *data) +{ + struct stm32_usbphyc *usbphyc = data; + + of_clk_del_provider(usbphyc->dev->of_node); + clk_hw_unregister(&usbphyc->clk48_hw); +} + +static int stm32_usbphyc_clk48_register(struct stm32_usbphyc *usbphyc) +{ + struct device_node *node = usbphyc->dev->of_node; + struct clk_init_data init = { }; + int ret = 0; + + init.name = "ck_usbo_48m"; + init.ops = &usbphyc_clk48_ops; + + usbphyc->clk48_hw.init = &init; + + ret = clk_hw_register(usbphyc->dev, &usbphyc->clk48_hw); + if (ret) + return ret; + + ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &usbphyc->clk48_hw); + if (ret) + clk_hw_unregister(&usbphyc->clk48_hw); + + return ret; +} + +static void stm32_usbphyc_phy_tuning(struct stm32_usbphyc *usbphyc, + struct device_node *np, u32 index) +{ + struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys[index]; + u32 reg = STM32_USBPHYC_TUNE(index); + u32 otpcomp, val; + int ret; + + /* Backup OTP compensation code */ + otpcomp = FIELD_GET(OTPCOMP, readl_relaxed(usbphyc->base + reg)); + + ret = of_property_read_u32(np, "st,current-boost-microamp", &val); + if (ret != -EINVAL) { + if (!ret && (val == BOOST_1000_UA || val == BOOST_2000_UA)) { + val = (val == BOOST_2000_UA) ? 1 : 0; + usbphyc_phy->tune |= INCURREN | FIELD_PREP(INCURRINT, val); + } else { + dev_warn(usbphyc->dev, "phy%d: invalid st,current-boost-microamp\n", index); + } + } + + if (!of_property_read_bool(np, "st,no-lsfs-fb-cap")) + usbphyc_phy->tune |= LFSCAPEN; + + if (of_property_read_bool(np, "st,decrease-hs-slew-rate")) + usbphyc_phy->tune |= HSDRVSLEW; + + ret = of_property_read_u32(np, "st,tune-hs-dc-level", &val); + if (ret != -EINVAL) { + if (!ret && val < DC_MAX) { + if (val == DC_MINUS_5_TO_7_MV) {/* Decreases HS driver DC level */ + usbphyc_phy->tune |= HSDRVDCCUR; + } else if (val > 0) { /* Increases HS driver DC level */ + val = (val == DC_PLUS_10_TO_14_MV) ? 1 : 0; + usbphyc_phy->tune |= HSDRVCURINCR | FIELD_PREP(HSDRVDCLEV, val); + } + } else { + dev_warn(usbphyc->dev, "phy%d: invalid st,tune-hs-dc-level\n", index); + } + } + + if (of_property_read_bool(np, "st,enable-fs-rftime-tuning")) + usbphyc_phy->tune |= FSDRVRFADJ; + + if (of_property_read_bool(np, "st,enable-hs-rftime-reduction")) + usbphyc_phy->tune |= HSDRVRFRED; + + ret = of_property_read_u32(np, "st,trim-hs-current", &val); + if (ret != -EINVAL) { + if (!ret && val < CUR_MAX) + usbphyc_phy->tune |= FIELD_PREP(HSDRVCHKITRM, val); + else + dev_warn(usbphyc->dev, "phy%d: invalid st,trim-hs-current\n", index); + } + + ret = of_property_read_u32(np, "st,trim-hs-impedance", &val); + if (ret != -EINVAL) { + if (!ret && val < IMP_MAX) + usbphyc_phy->tune |= FIELD_PREP(HSDRVCHKZTRM, val); + else + dev_warn(usbphyc->dev, "phy%d: invalid st,trim-hs-impedance\n", index); + } + + ret = of_property_read_u32(np, "st,tune-squelch-level", &val); + if (ret != -EINVAL) { + if (!ret && val < SQLCH_MAX) + usbphyc_phy->tune |= FIELD_PREP(SQLCHCTL, val); + else + dev_warn(usbphyc->dev, "phy%d: invalid st,tune-squelch\n", index); + } + + if (of_property_read_bool(np, "st,enable-hs-rx-gain-eq")) + usbphyc_phy->tune |= HDRXGNEQEN; + + ret = of_property_read_u32(np, "st,tune-hs-rx-offset", &val); + if (ret != -EINVAL) { + if (!ret && val < RX_OFFSET_MAX) + usbphyc_phy->tune |= FIELD_PREP(HSRXOFF, val); + else + dev_warn(usbphyc->dev, "phy%d: invalid st,tune-hs-rx-offset\n", index); + } + + if (of_property_read_bool(np, "st,no-hs-ftime-ctrl")) + usbphyc_phy->tune |= HSFALLPREEM; + + if (!of_property_read_bool(np, "st,no-lsfs-sc")) + usbphyc_phy->tune |= SHTCCTCTLPROT; + + if (of_property_read_bool(np, "st,enable-hs-tx-staggering")) + usbphyc_phy->tune |= STAGSEL; + + /* Restore OTP compensation code */ + usbphyc_phy->tune |= FIELD_PREP(OTPCOMP, otpcomp); + + /* + * By default, if no st,xxx tuning property is used, usbphyc_phy->tune is equal to + * STM32_USBPHYC_TUNE reset value (LFSCAPEN | SHTCCTCTLPROT | OTPCOMP). + */ + writel_relaxed(usbphyc_phy->tune, usbphyc->base + reg); +} + +static void stm32_usbphyc_switch_setup(struct stm32_usbphyc *usbphyc, + u32 utmi_switch) +{ + if (!utmi_switch) + stm32_usbphyc_clr_bits(usbphyc->base + STM32_USBPHYC_MISC, + SWITHOST); + else + stm32_usbphyc_set_bits(usbphyc->base + STM32_USBPHYC_MISC, + SWITHOST); + usbphyc->switch_setup = utmi_switch; +} + +static struct phy *stm32_usbphyc_of_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev); + struct stm32_usbphyc_phy *usbphyc_phy = NULL; + struct device_node *phynode = args->np; + int port = 0; + + for (port = 0; port < usbphyc->nphys; port++) { + if (phynode == usbphyc->phys[port]->phy->dev.of_node) { + usbphyc_phy = usbphyc->phys[port]; + break; + } + } + if (!usbphyc_phy) { + dev_err(dev, "failed to find phy\n"); + return ERR_PTR(-EINVAL); + } + + if (((usbphyc_phy->index == 0) && (args->args_count != 0)) || + ((usbphyc_phy->index == 1) && (args->args_count != 1))) { + dev_err(dev, "invalid number of cells for phy port%d\n", + usbphyc_phy->index); + return ERR_PTR(-EINVAL); + } + + /* Configure the UTMI switch for PHY port#2 */ + if (usbphyc_phy->index == 1) { + if (usbphyc->switch_setup < 0) { + stm32_usbphyc_switch_setup(usbphyc, args->args[0]); + } else { + if (args->args[0] != usbphyc->switch_setup) { + dev_err(dev, "phy port1 already used\n"); + return ERR_PTR(-EBUSY); + } + } + } + + return usbphyc_phy->phy; +} + +static int stm32_usbphyc_probe(struct platform_device *pdev) +{ + struct stm32_usbphyc *usbphyc; + struct device *dev = &pdev->dev; + struct device_node *child, *np = dev->of_node; + struct phy_provider *phy_provider; + u32 pllen, version; + int ret, port = 0; + + usbphyc = devm_kzalloc(dev, sizeof(*usbphyc), GFP_KERNEL); + if (!usbphyc) + return -ENOMEM; + usbphyc->dev = dev; + dev_set_drvdata(dev, usbphyc); + + usbphyc->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(usbphyc->base)) + return PTR_ERR(usbphyc->base); + + usbphyc->clk = devm_clk_get(dev, NULL); + if (IS_ERR(usbphyc->clk)) + return dev_err_probe(dev, PTR_ERR(usbphyc->clk), "clk get_failed\n"); + + ret = clk_prepare_enable(usbphyc->clk); + if (ret) { + dev_err(dev, "clk enable failed: %d\n", ret); + return ret; + } + + usbphyc->rst = devm_reset_control_get(dev, NULL); + if (!IS_ERR(usbphyc->rst)) { + reset_control_assert(usbphyc->rst); + udelay(2); + reset_control_deassert(usbphyc->rst); + } else { + ret = PTR_ERR(usbphyc->rst); + if (ret == -EPROBE_DEFER) + goto clk_disable; + + stm32_usbphyc_clr_bits(usbphyc->base + STM32_USBPHYC_PLL, PLLEN); + } + + /* + * Wait for minimum width of powerdown pulse (ENABLE = Low): + * we have to ensure the PLL is disabled before phys initialization. + */ + if (readl_relaxed_poll_timeout(usbphyc->base + STM32_USBPHYC_PLL, + pllen, !(pllen & PLLEN), 5, 50)) { + dev_warn(usbphyc->dev, "PLL not reset\n"); + ret = -EPROBE_DEFER; + goto clk_disable; + } + + usbphyc->switch_setup = -EINVAL; + usbphyc->nphys = of_get_child_count(np); + usbphyc->phys = devm_kcalloc(dev, usbphyc->nphys, + sizeof(*usbphyc->phys), GFP_KERNEL); + if (!usbphyc->phys) { + ret = -ENOMEM; + goto clk_disable; + } + + usbphyc->vdda1v1 = devm_regulator_get(dev, "vdda1v1"); + if (IS_ERR(usbphyc->vdda1v1)) { + ret = dev_err_probe(dev, PTR_ERR(usbphyc->vdda1v1), + "failed to get vdda1v1 supply\n"); + goto clk_disable; + } + + usbphyc->vdda1v8 = devm_regulator_get(dev, "vdda1v8"); + if (IS_ERR(usbphyc->vdda1v8)) { + ret = dev_err_probe(dev, PTR_ERR(usbphyc->vdda1v8), + "failed to get vdda1v8 supply\n"); + goto clk_disable; + } + + for_each_child_of_node(np, child) { + struct stm32_usbphyc_phy *usbphyc_phy; + struct phy *phy; + u32 index; + + phy = devm_phy_create(dev, child, &stm32_usbphyc_phy_ops); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to create phy%d: %d\n", + port, ret); + goto put_child; + } + + usbphyc_phy = devm_kzalloc(dev, sizeof(*usbphyc_phy), + GFP_KERNEL); + if (!usbphyc_phy) { + ret = -ENOMEM; + goto put_child; + } + + ret = of_property_read_u32(child, "reg", &index); + if (ret || index > usbphyc->nphys) { + dev_err(&phy->dev, "invalid reg property: %d\n", ret); + if (!ret) + ret = -EINVAL; + goto put_child; + } + + usbphyc->phys[port] = usbphyc_phy; + phy_set_bus_width(phy, 8); + phy_set_drvdata(phy, usbphyc_phy); + + usbphyc->phys[port]->phy = phy; + usbphyc->phys[port]->usbphyc = usbphyc; + usbphyc->phys[port]->index = index; + usbphyc->phys[port]->active = false; + + usbphyc->phys[port]->vbus = devm_regulator_get_optional(&phy->dev, "vbus"); + if (IS_ERR(usbphyc->phys[port]->vbus)) { + ret = PTR_ERR(usbphyc->phys[port]->vbus); + if (ret == -EPROBE_DEFER) + goto put_child; + usbphyc->phys[port]->vbus = NULL; + } + + /* Configure phy tuning */ + stm32_usbphyc_phy_tuning(usbphyc, child, index); + + port++; + } + + phy_provider = devm_of_phy_provider_register(dev, + stm32_usbphyc_of_xlate); + if (IS_ERR(phy_provider)) { + ret = PTR_ERR(phy_provider); + dev_err(dev, "failed to register phy provider: %d\n", ret); + goto clk_disable; + } + + ret = stm32_usbphyc_clk48_register(usbphyc); + if (ret) { + dev_err(dev, "failed to register ck_usbo_48m clock: %d\n", ret); + goto clk_disable; + } + + version = readl_relaxed(usbphyc->base + STM32_USBPHYC_VERSION); + dev_info(dev, "registered rev:%lu.%lu\n", + FIELD_GET(MAJREV, version), FIELD_GET(MINREV, version)); + + return 0; + +put_child: + of_node_put(child); +clk_disable: + clk_disable_unprepare(usbphyc->clk); + + return ret; +} + +static int stm32_usbphyc_remove(struct platform_device *pdev) +{ + struct stm32_usbphyc *usbphyc = dev_get_drvdata(&pdev->dev); + int port; + + /* Ensure PHYs are not active, to allow PLL disabling */ + for (port = 0; port < usbphyc->nphys; port++) + if (usbphyc->phys[port]->active) + stm32_usbphyc_phy_exit(usbphyc->phys[port]->phy); + + stm32_usbphyc_clk48_unregister(usbphyc); + + clk_disable_unprepare(usbphyc->clk); + + return 0; +} + +static int __maybe_unused stm32_usbphyc_resume(struct device *dev) +{ + struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev); + struct stm32_usbphyc_phy *usbphyc_phy; + int port; + + if (usbphyc->switch_setup >= 0) + stm32_usbphyc_switch_setup(usbphyc, usbphyc->switch_setup); + + for (port = 0; port < usbphyc->nphys; port++) { + usbphyc_phy = usbphyc->phys[port]; + writel_relaxed(usbphyc_phy->tune, usbphyc->base + STM32_USBPHYC_TUNE(port)); + } + + return 0; +} + +static SIMPLE_DEV_PM_OPS(stm32_usbphyc_pm_ops, NULL, stm32_usbphyc_resume); + +static const struct of_device_id stm32_usbphyc_of_match[] = { + { .compatible = "st,stm32mp1-usbphyc", }, + { }, +}; +MODULE_DEVICE_TABLE(of, stm32_usbphyc_of_match); + +static struct platform_driver stm32_usbphyc_driver = { + .probe = stm32_usbphyc_probe, + .remove = stm32_usbphyc_remove, + .driver = { + .of_match_table = stm32_usbphyc_of_match, + .name = "stm32-usbphyc", + .pm = &stm32_usbphyc_pm_ops, + } +}; +module_platform_driver(stm32_usbphyc_driver); + +MODULE_DESCRIPTION("STMicroelectronics STM32 USBPHYC driver"); +MODULE_AUTHOR("Amelie Delaunay "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3