From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/pinctrl/bcm/Kconfig | 216 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 216 insertions(+) create mode 100644 drivers/pinctrl/bcm/Kconfig (limited to 'drivers/pinctrl/bcm/Kconfig') diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig new file mode 100644 index 000000000..35b51ce42 --- /dev/null +++ b/drivers/pinctrl/bcm/Kconfig @@ -0,0 +1,216 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Broadcom pinctrl drivers +# + +config PINCTRL_BCM281XX + bool "Broadcom BCM281xx pinctrl driver" + depends on OF && (ARCH_BCM_MOBILE || COMPILE_TEST) + select PINMUX + select PINCONF + select GENERIC_PINCONF + select REGMAP_MMIO + default ARCH_BCM_MOBILE + help + Say Y here to support Broadcom BCM281xx pinctrl driver, which is used + for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351, + BCM28145, and BCM28155 SoCs. This driver requires the pinctrl + framework. GPIO is provided by a separate GPIO driver. + +config PINCTRL_BCM2835 + tristate "Broadcom BCM2835 GPIO (with PINCONF) driver" + depends on OF && (ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST) + select PINMUX + select PINCONF + select GENERIC_PINCONF + select GPIOLIB + select GPIOLIB_IRQCHIP + default ARCH_BCM2835 || ARCH_BRCMSTB + help + Say Y here to enable the Broadcom BCM2835 GPIO driver. + +config PINCTRL_BCM4908 + tristate "Broadcom BCM4908 pinmux driver" + depends on OF && (ARCH_BCMBCA || COMPILE_TEST) + select PINMUX + select PINCONF + select GENERIC_PINCONF + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + default ARCH_BCMBCA + help + Driver for BCM4908 family SoCs with integrated pin controller. + + If compiled as module it will be called pinctrl-bcm4908. + +config PINCTRL_BCM63XX + bool + select PINMUX + select PINCONF + select GENERIC_PINCONF + select GPIOLIB + select REGMAP + select GPIO_REGMAP + +config PINCTRL_BCM6318 + bool "Broadcom BCM6318 GPIO driver" + depends on (BMIPS_GENERIC || COMPILE_TEST) + depends on OF + select PINCTRL_BCM63XX + default BMIPS_GENERIC + help + Say Y here to enable the Broadcom BCM6318 GPIO driver. + +config PINCTRL_BCM6328 + bool "Broadcom BCM6328 GPIO driver" + depends on (BMIPS_GENERIC || COMPILE_TEST) + depends on OF + select PINCTRL_BCM63XX + default BMIPS_GENERIC + help + Say Y here to enable the Broadcom BCM6328 GPIO driver. + +config PINCTRL_BCM6358 + bool "Broadcom BCM6358 GPIO driver" + depends on (BMIPS_GENERIC || COMPILE_TEST) + depends on OF + select PINCTRL_BCM63XX + default BMIPS_GENERIC + help + Say Y here to enable the Broadcom BCM6358 GPIO driver. + +config PINCTRL_BCM6362 + bool "Broadcom BCM6362 GPIO driver" + depends on (BMIPS_GENERIC || COMPILE_TEST) + depends on OF + select PINCTRL_BCM63XX + default BMIPS_GENERIC + help + Say Y here to enable the Broadcom BCM6362 GPIO driver. + +config PINCTRL_BCM6368 + bool "Broadcom BCM6368 GPIO driver" + depends on (BMIPS_GENERIC || COMPILE_TEST) + depends on OF + select PINCTRL_BCM63XX + default BMIPS_GENERIC + help + Say Y here to enable the Broadcom BCM6368 GPIO driver. + +config PINCTRL_BCM63268 + bool "Broadcom BCM63268 GPIO driver" + depends on (BMIPS_GENERIC || COMPILE_TEST) + depends on OF + select PINCTRL_BCM63XX + default BMIPS_GENERIC + help + Say Y here to enable the Broadcom BCM63268 GPIO driver. + +config PINCTRL_IPROC_GPIO + bool "Broadcom iProc GPIO (with PINCONF) driver" + depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) + select GPIOLIB_IRQCHIP + select PINCONF + select GENERIC_PINCONF + default ARCH_BCM_IPROC + help + Say yes here to enable the Broadcom iProc GPIO driver. + + The Broadcom iProc based SoCs- Cygnus, NS2, NSP and Stingray, use + same GPIO Controller IP hence this driver could be used for all. + + The Broadcom Cygnus SoC has 3 GPIO controllers including the ASIU + GPIO controller (ASIU), the chipCommonG GPIO controller (CCM), and + the always-ON GPIO controller (CRMU/AON). All 3 GPIO controllers are + supported by this driver. + + The Broadcom NSP has two GPIO controllers including the ChipcommonA + GPIO, the ChipcommonB GPIO. Later controller is supported by this + driver. + + The Broadcom NS2 has two GPIO controller including the CRMU GPIO, + the ChipcommonG GPIO. Both controllers are supported by this driver. + + The Broadcom Stingray GPIO controllers are supported by this driver. + + All above SoCs GPIO controllers support basic PINCONF functions such + as bias pull up, pull down, and drive strength configurations, when + these pins are muxed to GPIO. + + It provides the framework where pins from the individual GPIO can be + individually muxed to GPIO function, through interaction with the + SoCs IOMUX controller. This features could be used only on SoCs which + support individual pin muxing. + +config PINCTRL_CYGNUS_MUX + bool "Broadcom Cygnus IOMUX driver" + depends on (ARCH_BCM_CYGNUS || COMPILE_TEST) + depends on OF + select PINMUX + select GENERIC_PINCONF + default ARCH_BCM_CYGNUS + help + Say yes here to enable the Broadcom Cygnus IOMUX driver. + + The Broadcom Cygnus IOMUX driver supports group based IOMUX + configuration, with the exception that certain individual pins + can be overridden to GPIO function + +config PINCTRL_NS + bool "Broadcom Northstar pins driver" + depends on OF && (ARCH_BCM_5301X || COMPILE_TEST) + select PINMUX + select GENERIC_PINCONF + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + default ARCH_BCM_5301X + help + Say yes here to enable the Broadcom NS SoC pins driver. + + The Broadcom Northstar pins driver supports muxing multi-purpose pins + that can be used for various functions (e.g. SPI, I2C, UART) as well + as GPIOs. + +config PINCTRL_NSP_GPIO + bool "Broadcom NSP GPIO (with PINCONF) driver" + depends on OF_GPIO && (ARCH_BCM_NSP || COMPILE_TEST) + select GPIOLIB_IRQCHIP + select PINCONF + select GENERIC_PINCONF + default ARCH_BCM_NSP + help + Say yes here to enable the Broadcom NSP GPIO driver. + + The Broadcom Northstar Plus SoC ChipcommonA GPIO controller is + supported by this driver. + + The ChipcommonA GPIO controller support basic PINCONF functions such + as bias pull up, pull down, and drive strength configurations, when + these pins are muxed to GPIO. + +config PINCTRL_NS2_MUX + bool "Broadcom Northstar2 pinmux driver" + depends on OF + depends on ARCH_BCM_IPROC || COMPILE_TEST + select PINMUX + select GENERIC_PINCONF + default ARM64 && ARCH_BCM_IPROC + help + Say yes here to enable the Broadcom NS2 MUX driver. + + The Broadcom Northstar2 IOMUX driver supports group based IOMUX + configuration. + +config PINCTRL_NSP_MUX + bool "Broadcom NSP IOMUX driver" + depends on (ARCH_BCM_NSP || COMPILE_TEST) + depends on OF + select PINMUX + select GENERIC_PINCONF + default ARCH_BCM_NSP + help + Say yes here to enable the Broadcom NSP SOC IOMUX driver. + + The Broadcom Northstar Plus IOMUX driver supports pin based IOMUX + configuration, with certain individual pins can be overridden + to GPIO function. -- cgit v1.2.3