From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/platform/x86/intel/chtwc_int33fe.c | 439 +++++++++++++++++++++++++++++ 1 file changed, 439 insertions(+) create mode 100644 drivers/platform/x86/intel/chtwc_int33fe.c (limited to 'drivers/platform/x86/intel/chtwc_int33fe.c') diff --git a/drivers/platform/x86/intel/chtwc_int33fe.c b/drivers/platform/x86/intel/chtwc_int33fe.c new file mode 100644 index 000000000..2c9a7d52b --- /dev/null +++ b/drivers/platform/x86/intel/chtwc_int33fe.c @@ -0,0 +1,439 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Cherry Trail ACPI INT33FE pseudo device driver + * + * Copyright (C) 2017 Hans de Goede + * + * Some Intel Cherry Trail based device which ship with Windows 10, have + * this weird INT33FE ACPI device with a CRS table with 4 I2cSerialBusV2 + * resources, for 4 different chips attached to various I²C buses: + * 1. The Whiskey Cove PMIC, which is also described by the INT34D3 ACPI device + * 2. Maxim MAX17047 Fuel Gauge Controller + * 3. FUSB302 USB Type-C Controller + * 4. PI3USB30532 USB switch + * + * So this driver is a stub / pseudo driver whose only purpose is to + * instantiate I²C clients for chips 2 - 4, so that standard I²C drivers + * for these chips can bind to the them. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct cht_int33fe_data { + struct i2c_client *battery_fg; + struct i2c_client *fusb302; + struct i2c_client *pi3usb30532; + struct fwnode_handle *dp; +}; + +/* + * Grrr, I severely dislike buggy BIOS-es. At least one BIOS enumerates + * the max17047 both through the INT33FE ACPI device (it is right there + * in the resources table) as well as through a separate MAX17047 device. + * + * These helpers are used to work around this by checking if an I²C client + * for the max17047 has already been registered. + */ +static int cht_int33fe_check_for_max17047(struct device *dev, void *data) +{ + struct i2c_client **max17047 = data; + struct acpi_device *adev; + + adev = ACPI_COMPANION(dev); + if (!adev) + return 0; + + /* The MAX17047 ACPI node doesn't have an UID, so we don't check that */ + if (!acpi_dev_hid_uid_match(adev, "MAX17047", NULL)) + return 0; + + *max17047 = to_i2c_client(dev); + return 1; +} + +static const char * const max17047_suppliers[] = { "bq24190-charger" }; + +static const struct property_entry max17047_properties[] = { + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", max17047_suppliers), + { } +}; + +static const struct software_node max17047_node = { + .name = "max17047", + .properties = max17047_properties, +}; + +/* + * We are not using inline property here because those are constant, + * and we need to adjust this one at runtime to point to real + * software node. + */ +static struct software_node_ref_args fusb302_mux_refs[] = { + { .node = NULL }, +}; + +static const struct property_entry fusb302_properties[] = { + PROPERTY_ENTRY_STRING("linux,extcon-name", "cht_wcove_pwrsrc"), + PROPERTY_ENTRY_REF_ARRAY("usb-role-switch", fusb302_mux_refs), + { } +}; + +static const struct software_node fusb302_node = { + .name = "fusb302", + .properties = fusb302_properties, +}; + +#define PDO_FIXED_FLAGS \ + (PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM) + +static const u32 src_pdo[] = { + PDO_FIXED(5000, 1500, PDO_FIXED_FLAGS), +}; + +static const u32 snk_pdo[] = { + PDO_FIXED(5000, 400, PDO_FIXED_FLAGS), + PDO_VAR(5000, 12000, 3000), +}; + +static const struct software_node pi3usb30532_node = { + .name = "pi3usb30532", +}; + +static const struct software_node displayport_node = { + .name = "displayport", +}; + +static const struct property_entry usb_connector_properties[] = { + PROPERTY_ENTRY_STRING("data-role", "dual"), + PROPERTY_ENTRY_STRING("power-role", "dual"), + PROPERTY_ENTRY_STRING("try-power-role", "sink"), + PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo), + PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo), + PROPERTY_ENTRY_U32("op-sink-microwatt", 2500000), + PROPERTY_ENTRY_REF("orientation-switch", &pi3usb30532_node), + PROPERTY_ENTRY_REF("mode-switch", &pi3usb30532_node), + PROPERTY_ENTRY_REF("displayport", &displayport_node), + { } +}; + +static const struct software_node usb_connector_node = { + .name = "connector", + .parent = &fusb302_node, + .properties = usb_connector_properties, +}; + +static const struct software_node altmodes_node = { + .name = "altmodes", + .parent = &usb_connector_node, +}; + +static const struct property_entry dp_altmode_properties[] = { + PROPERTY_ENTRY_U32("svid", 0xff01), + PROPERTY_ENTRY_U32("vdo", 0x0c0086), + { } +}; + +static const struct software_node dp_altmode_node = { + .name = "displayport-altmode", + .parent = &altmodes_node, + .properties = dp_altmode_properties, +}; + +static const struct software_node *node_group[] = { + &fusb302_node, + &max17047_node, + &pi3usb30532_node, + &displayport_node, + &usb_connector_node, + &altmodes_node, + &dp_altmode_node, + NULL +}; + +static int cht_int33fe_setup_dp(struct cht_int33fe_data *data) +{ + struct fwnode_handle *fwnode; + struct pci_dev *pdev; + + fwnode = software_node_fwnode(&displayport_node); + if (!fwnode) + return -ENODEV; + + /* First let's find the GPU PCI device */ + pdev = pci_get_class(PCI_CLASS_DISPLAY_VGA << 8, NULL); + if (!pdev || pdev->vendor != PCI_VENDOR_ID_INTEL) { + pci_dev_put(pdev); + return -ENODEV; + } + + /* Then the DP-2 child device node */ + data->dp = device_get_named_child_node(&pdev->dev, "DD04"); + pci_dev_put(pdev); + if (!data->dp) + return -ENODEV; + + fwnode->secondary = ERR_PTR(-ENODEV); + data->dp->secondary = fwnode; + + return 0; +} + +static void cht_int33fe_remove_nodes(struct cht_int33fe_data *data) +{ + software_node_unregister_node_group(node_group); + + if (fusb302_mux_refs[0].node) { + fwnode_handle_put(software_node_fwnode(fusb302_mux_refs[0].node)); + fusb302_mux_refs[0].node = NULL; + } + + if (data->dp) { + data->dp->secondary = NULL; + fwnode_handle_put(data->dp); + data->dp = NULL; + } +} + +static int cht_int33fe_add_nodes(struct cht_int33fe_data *data) +{ + const struct software_node *mux_ref_node; + int ret; + + /* + * There is no ACPI device node for the USB role mux, so we need to wait + * until the mux driver has created software node for the mux device. + * It means we depend on the mux driver. This function will return + * -EPROBE_DEFER until the mux device is registered. + */ + mux_ref_node = software_node_find_by_name(NULL, "intel-xhci-usb-sw"); + if (!mux_ref_node) + return -EPROBE_DEFER; + + /* + * Update node used in "usb-role-switch" property. Note that we + * rely on software_node_register_node_group() to use the original + * instance of properties instead of copying them. + */ + fusb302_mux_refs[0].node = mux_ref_node; + + ret = software_node_register_node_group(node_group); + if (ret) + return ret; + + /* The devices that are not created in this driver need extra steps. */ + + /* + * The DP connector does have ACPI device node. In this case we can just + * find that ACPI node and assign our node as the secondary node to it. + */ + ret = cht_int33fe_setup_dp(data); + if (ret) + goto err_remove_nodes; + + return 0; + +err_remove_nodes: + cht_int33fe_remove_nodes(data); + + return ret; +} + +static int +cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data) +{ + struct i2c_client *max17047 = NULL; + struct i2c_board_info board_info; + struct fwnode_handle *fwnode; + int ret; + + fwnode = software_node_fwnode(&max17047_node); + if (!fwnode) + return -ENODEV; + + i2c_for_each_dev(&max17047, cht_int33fe_check_for_max17047); + if (max17047) { + /* Pre-existing I²C client for the max17047, add device properties */ + set_secondary_fwnode(&max17047->dev, fwnode); + /* And re-probe to get the new device properties applied */ + ret = device_reprobe(&max17047->dev); + if (ret) + dev_warn(dev, "Reprobing max17047 error: %d\n", ret); + return 0; + } + + memset(&board_info, 0, sizeof(board_info)); + strscpy(board_info.type, "max17047", I2C_NAME_SIZE); + board_info.dev_name = "max17047"; + board_info.fwnode = fwnode; + data->battery_fg = i2c_acpi_new_device(dev, 1, &board_info); + + return PTR_ERR_OR_ZERO(data->battery_fg); +} + +static const struct dmi_system_id cht_int33fe_typec_ids[] = { + { + /* + * GPD win / GPD pocket mini laptops + * + * This DMI match may not seem unique, but it is. In the 67000+ + * DMI decode dumps from linux-hardware.org only 116 have + * board_vendor set to "AMI Corporation" and of those 116 only + * the GPD win's and pocket's board_name is "Default string". + */ + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"), + DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"), + }, + }, + { } +}; +MODULE_DEVICE_TABLE(dmi, cht_int33fe_typec_ids); + +static int cht_int33fe_typec_probe(struct platform_device *pdev) +{ + struct i2c_board_info board_info; + struct device *dev = &pdev->dev; + struct cht_int33fe_data *data; + struct fwnode_handle *fwnode; + struct regulator *regulator; + int fusb302_irq; + int ret; + + if (!dmi_check_system(cht_int33fe_typec_ids)) + return -ENODEV; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* + * We expect the WC PMIC to be paired with a TI bq24292i charger-IC. + * We check for the bq24292i vbus regulator here, this has 2 purposes: + * 1) The bq24292i allows charging with up to 12V, setting the fusb302's + * max-snk voltage to 12V with another charger-IC is not good. + * 2) For the fusb302 driver to get the bq24292i vbus regulator, the + * regulator-map, which is part of the bq24292i regulator_init_data, + * must be registered before the fusb302 is instantiated, otherwise + * it will end up with a dummy-regulator. + * Note "cht_wc_usb_typec_vbus" comes from the regulator_init_data + * which is defined in i2c-cht-wc.c from where the bq24292i I²C client + * gets instantiated. We use regulator_get_optional here so that we + * don't end up getting a dummy-regulator ourselves. + */ + regulator = regulator_get_optional(dev, "cht_wc_usb_typec_vbus"); + if (IS_ERR(regulator)) { + ret = PTR_ERR(regulator); + return (ret == -ENODEV) ? -EPROBE_DEFER : ret; + } + regulator_put(regulator); + + /* The FUSB302 uses the IRQ at index 1 and is the only IRQ user */ + fusb302_irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 1); + if (fusb302_irq < 0) { + if (fusb302_irq != -EPROBE_DEFER) + dev_err(dev, "Error getting FUSB302 irq\n"); + return fusb302_irq; + } + + ret = cht_int33fe_add_nodes(data); + if (ret) + return ret; + + /* Work around BIOS bug, see comment on cht_int33fe_check_for_max17047() */ + ret = cht_int33fe_register_max17047(dev, data); + if (ret) + goto out_remove_nodes; + + fwnode = software_node_fwnode(&fusb302_node); + if (!fwnode) { + ret = -ENODEV; + goto out_unregister_max17047; + } + + memset(&board_info, 0, sizeof(board_info)); + strscpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE); + board_info.dev_name = "fusb302"; + board_info.fwnode = fwnode; + board_info.irq = fusb302_irq; + + data->fusb302 = i2c_acpi_new_device(dev, 2, &board_info); + if (IS_ERR(data->fusb302)) { + ret = PTR_ERR(data->fusb302); + goto out_unregister_max17047; + } + + fwnode = software_node_fwnode(&pi3usb30532_node); + if (!fwnode) { + ret = -ENODEV; + goto out_unregister_fusb302; + } + + memset(&board_info, 0, sizeof(board_info)); + board_info.dev_name = "pi3usb30532"; + board_info.fwnode = fwnode; + strscpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE); + + data->pi3usb30532 = i2c_acpi_new_device(dev, 3, &board_info); + if (IS_ERR(data->pi3usb30532)) { + ret = PTR_ERR(data->pi3usb30532); + goto out_unregister_fusb302; + } + + platform_set_drvdata(pdev, data); + + return 0; + +out_unregister_fusb302: + i2c_unregister_device(data->fusb302); + +out_unregister_max17047: + i2c_unregister_device(data->battery_fg); + +out_remove_nodes: + cht_int33fe_remove_nodes(data); + + return ret; +} + +static int cht_int33fe_typec_remove(struct platform_device *pdev) +{ + struct cht_int33fe_data *data = platform_get_drvdata(pdev); + + i2c_unregister_device(data->pi3usb30532); + i2c_unregister_device(data->fusb302); + i2c_unregister_device(data->battery_fg); + + cht_int33fe_remove_nodes(data); + + return 0; +} + +static const struct acpi_device_id cht_int33fe_acpi_ids[] = { + { "INT33FE", }, + { } +}; + +static struct platform_driver cht_int33fe_typec_driver = { + .driver = { + .name = "Intel Cherry Trail ACPI INT33FE Type-C driver", + .acpi_match_table = ACPI_PTR(cht_int33fe_acpi_ids), + }, + .probe = cht_int33fe_typec_probe, + .remove = cht_int33fe_typec_remove, +}; + +module_platform_driver(cht_int33fe_typec_driver); + +MODULE_DESCRIPTION("Intel Cherry Trail ACPI INT33FE Type-C pseudo device driver"); +MODULE_AUTHOR("Hans de Goede "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3