From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/remoteproc/qcom_q6v5_mss.c | 2386 ++++++++++++++++++++++++++++++++++++ 1 file changed, 2386 insertions(+) create mode 100644 drivers/remoteproc/qcom_q6v5_mss.c (limited to 'drivers/remoteproc/qcom_q6v5_mss.c') diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c new file mode 100644 index 000000000..7dbab5fcb --- /dev/null +++ b/drivers/remoteproc/qcom_q6v5_mss.c @@ -0,0 +1,2386 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Qualcomm self-authenticating modem subsystem remoteproc driver + * + * Copyright (C) 2016 Linaro Ltd. + * Copyright (C) 2014 Sony Mobile Communications AB + * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "remoteproc_internal.h" +#include "qcom_common.h" +#include "qcom_pil_info.h" +#include "qcom_q6v5.h" + +#include + +#define MPSS_CRASH_REASON_SMEM 421 + +#define MBA_LOG_SIZE SZ_4K + +/* RMB Status Register Values */ +#define RMB_PBL_SUCCESS 0x1 + +#define RMB_MBA_XPU_UNLOCKED 0x1 +#define RMB_MBA_XPU_UNLOCKED_SCRIBBLED 0x2 +#define RMB_MBA_META_DATA_AUTH_SUCCESS 0x3 +#define RMB_MBA_AUTH_COMPLETE 0x4 + +/* PBL/MBA interface registers */ +#define RMB_MBA_IMAGE_REG 0x00 +#define RMB_PBL_STATUS_REG 0x04 +#define RMB_MBA_COMMAND_REG 0x08 +#define RMB_MBA_STATUS_REG 0x0C +#define RMB_PMI_META_DATA_REG 0x10 +#define RMB_PMI_CODE_START_REG 0x14 +#define RMB_PMI_CODE_LENGTH_REG 0x18 +#define RMB_MBA_MSS_STATUS 0x40 +#define RMB_MBA_ALT_RESET 0x44 + +#define RMB_CMD_META_DATA_READY 0x1 +#define RMB_CMD_LOAD_READY 0x2 + +/* QDSP6SS Register Offsets */ +#define QDSP6SS_RESET_REG 0x014 +#define QDSP6SS_GFMUX_CTL_REG 0x020 +#define QDSP6SS_PWR_CTL_REG 0x030 +#define QDSP6SS_MEM_PWR_CTL 0x0B0 +#define QDSP6V6SS_MEM_PWR_CTL 0x034 +#define QDSP6SS_STRAP_ACC 0x110 + +/* AXI Halt Register Offsets */ +#define AXI_HALTREQ_REG 0x0 +#define AXI_HALTACK_REG 0x4 +#define AXI_IDLE_REG 0x8 +#define AXI_GATING_VALID_OVERRIDE BIT(0) + +#define HALT_ACK_TIMEOUT_US 100000 + +/* QACCEPT Register Offsets */ +#define QACCEPT_ACCEPT_REG 0x0 +#define QACCEPT_ACTIVE_REG 0x4 +#define QACCEPT_DENY_REG 0x8 +#define QACCEPT_REQ_REG 0xC + +#define QACCEPT_TIMEOUT_US 50 + +/* QDSP6SS_RESET */ +#define Q6SS_STOP_CORE BIT(0) +#define Q6SS_CORE_ARES BIT(1) +#define Q6SS_BUS_ARES_ENABLE BIT(2) + +/* QDSP6SS CBCR */ +#define Q6SS_CBCR_CLKEN BIT(0) +#define Q6SS_CBCR_CLKOFF BIT(31) +#define Q6SS_CBCR_TIMEOUT_US 200 + +/* QDSP6SS_GFMUX_CTL */ +#define Q6SS_CLK_ENABLE BIT(1) + +/* QDSP6SS_PWR_CTL */ +#define Q6SS_L2DATA_SLP_NRET_N_0 BIT(0) +#define Q6SS_L2DATA_SLP_NRET_N_1 BIT(1) +#define Q6SS_L2DATA_SLP_NRET_N_2 BIT(2) +#define Q6SS_L2TAG_SLP_NRET_N BIT(16) +#define Q6SS_ETB_SLP_NRET_N BIT(17) +#define Q6SS_L2DATA_STBY_N BIT(18) +#define Q6SS_SLP_RET_N BIT(19) +#define Q6SS_CLAMP_IO BIT(20) +#define QDSS_BHS_ON BIT(21) +#define QDSS_LDO_BYP BIT(22) + +/* QDSP6v56 parameters */ +#define QDSP6v56_LDO_BYP BIT(25) +#define QDSP6v56_BHS_ON BIT(24) +#define QDSP6v56_CLAMP_WL BIT(21) +#define QDSP6v56_CLAMP_QMC_MEM BIT(22) +#define QDSP6SS_XO_CBCR 0x0038 +#define QDSP6SS_ACC_OVERRIDE_VAL 0x20 + +/* QDSP6v65 parameters */ +#define QDSP6SS_CORE_CBCR 0x20 +#define QDSP6SS_SLEEP 0x3C +#define QDSP6SS_BOOT_CORE_START 0x400 +#define QDSP6SS_BOOT_CMD 0x404 +#define BOOT_FSM_TIMEOUT 10000 + +struct reg_info { + struct regulator *reg; + int uV; + int uA; +}; + +struct qcom_mss_reg_res { + const char *supply; + int uV; + int uA; +}; + +struct rproc_hexagon_res { + const char *hexagon_mba_image; + struct qcom_mss_reg_res *proxy_supply; + struct qcom_mss_reg_res *fallback_proxy_supply; + struct qcom_mss_reg_res *active_supply; + char **proxy_clk_names; + char **reset_clk_names; + char **active_clk_names; + char **proxy_pd_names; + int version; + bool need_mem_protection; + bool has_alt_reset; + bool has_mba_logs; + bool has_spare_reg; + bool has_qaccept_regs; + bool has_ext_cntl_regs; + bool has_vq6; +}; + +struct q6v5 { + struct device *dev; + struct rproc *rproc; + + void __iomem *reg_base; + void __iomem *rmb_base; + + struct regmap *halt_map; + struct regmap *conn_map; + + u32 halt_q6; + u32 halt_modem; + u32 halt_nc; + u32 halt_vq6; + u32 conn_box; + + u32 qaccept_mdm; + u32 qaccept_cx; + u32 qaccept_axi; + + u32 axim1_clk_off; + u32 crypto_clk_off; + u32 force_clk_on; + u32 rscc_disable; + + struct reset_control *mss_restart; + struct reset_control *pdc_reset; + + struct qcom_q6v5 q6v5; + + struct clk *active_clks[8]; + struct clk *reset_clks[4]; + struct clk *proxy_clks[4]; + struct device *proxy_pds[3]; + int active_clk_count; + int reset_clk_count; + int proxy_clk_count; + int proxy_pd_count; + + struct reg_info active_regs[1]; + struct reg_info proxy_regs[1]; + struct reg_info fallback_proxy_regs[2]; + int active_reg_count; + int proxy_reg_count; + int fallback_proxy_reg_count; + + bool dump_mba_loaded; + size_t current_dump_size; + size_t total_dump_size; + + phys_addr_t mba_phys; + size_t mba_size; + size_t dp_size; + + phys_addr_t mdata_phys; + size_t mdata_size; + + phys_addr_t mpss_phys; + phys_addr_t mpss_reloc; + size_t mpss_size; + + struct qcom_rproc_glink glink_subdev; + struct qcom_rproc_subdev smd_subdev; + struct qcom_rproc_ssr ssr_subdev; + struct qcom_sysmon *sysmon; + struct platform_device *bam_dmux; + bool need_mem_protection; + bool has_alt_reset; + bool has_mba_logs; + bool has_spare_reg; + bool has_qaccept_regs; + bool has_ext_cntl_regs; + bool has_vq6; + int mpss_perm; + int mba_perm; + const char *hexagon_mdt_image; + int version; +}; + +enum { + MSS_MSM8916, + MSS_MSM8974, + MSS_MSM8996, + MSS_MSM8998, + MSS_SC7180, + MSS_SC7280, + MSS_SDM845, +}; + +static int q6v5_regulator_init(struct device *dev, struct reg_info *regs, + const struct qcom_mss_reg_res *reg_res) +{ + int rc; + int i; + + if (!reg_res) + return 0; + + for (i = 0; reg_res[i].supply; i++) { + regs[i].reg = devm_regulator_get(dev, reg_res[i].supply); + if (IS_ERR(regs[i].reg)) { + rc = PTR_ERR(regs[i].reg); + if (rc != -EPROBE_DEFER) + dev_err(dev, "Failed to get %s\n regulator", + reg_res[i].supply); + return rc; + } + + regs[i].uV = reg_res[i].uV; + regs[i].uA = reg_res[i].uA; + } + + return i; +} + +static int q6v5_regulator_enable(struct q6v5 *qproc, + struct reg_info *regs, int count) +{ + int ret; + int i; + + for (i = 0; i < count; i++) { + if (regs[i].uV > 0) { + ret = regulator_set_voltage(regs[i].reg, + regs[i].uV, INT_MAX); + if (ret) { + dev_err(qproc->dev, + "Failed to request voltage for %d.\n", + i); + goto err; + } + } + + if (regs[i].uA > 0) { + ret = regulator_set_load(regs[i].reg, + regs[i].uA); + if (ret < 0) { + dev_err(qproc->dev, + "Failed to set regulator mode\n"); + goto err; + } + } + + ret = regulator_enable(regs[i].reg); + if (ret) { + dev_err(qproc->dev, "Regulator enable failed\n"); + goto err; + } + } + + return 0; +err: + for (; i >= 0; i--) { + if (regs[i].uV > 0) + regulator_set_voltage(regs[i].reg, 0, INT_MAX); + + if (regs[i].uA > 0) + regulator_set_load(regs[i].reg, 0); + + regulator_disable(regs[i].reg); + } + + return ret; +} + +static void q6v5_regulator_disable(struct q6v5 *qproc, + struct reg_info *regs, int count) +{ + int i; + + for (i = 0; i < count; i++) { + if (regs[i].uV > 0) + regulator_set_voltage(regs[i].reg, 0, INT_MAX); + + if (regs[i].uA > 0) + regulator_set_load(regs[i].reg, 0); + + regulator_disable(regs[i].reg); + } +} + +static int q6v5_clk_enable(struct device *dev, + struct clk **clks, int count) +{ + int rc; + int i; + + for (i = 0; i < count; i++) { + rc = clk_prepare_enable(clks[i]); + if (rc) { + dev_err(dev, "Clock enable failed\n"); + goto err; + } + } + + return 0; +err: + for (i--; i >= 0; i--) + clk_disable_unprepare(clks[i]); + + return rc; +} + +static void q6v5_clk_disable(struct device *dev, + struct clk **clks, int count) +{ + int i; + + for (i = 0; i < count; i++) + clk_disable_unprepare(clks[i]); +} + +static int q6v5_pds_enable(struct q6v5 *qproc, struct device **pds, + size_t pd_count) +{ + int ret; + int i; + + for (i = 0; i < pd_count; i++) { + dev_pm_genpd_set_performance_state(pds[i], INT_MAX); + ret = pm_runtime_get_sync(pds[i]); + if (ret < 0) { + pm_runtime_put_noidle(pds[i]); + dev_pm_genpd_set_performance_state(pds[i], 0); + goto unroll_pd_votes; + } + } + + return 0; + +unroll_pd_votes: + for (i--; i >= 0; i--) { + dev_pm_genpd_set_performance_state(pds[i], 0); + pm_runtime_put(pds[i]); + } + + return ret; +} + +static void q6v5_pds_disable(struct q6v5 *qproc, struct device **pds, + size_t pd_count) +{ + int i; + + for (i = 0; i < pd_count; i++) { + dev_pm_genpd_set_performance_state(pds[i], 0); + pm_runtime_put(pds[i]); + } +} + +static int q6v5_xfer_mem_ownership(struct q6v5 *qproc, int *current_perm, + bool local, bool remote, phys_addr_t addr, + size_t size) +{ + struct qcom_scm_vmperm next[2]; + int perms = 0; + + if (!qproc->need_mem_protection) + return 0; + + if (local == !!(*current_perm & BIT(QCOM_SCM_VMID_HLOS)) && + remote == !!(*current_perm & BIT(QCOM_SCM_VMID_MSS_MSA))) + return 0; + + if (local) { + next[perms].vmid = QCOM_SCM_VMID_HLOS; + next[perms].perm = QCOM_SCM_PERM_RWX; + perms++; + } + + if (remote) { + next[perms].vmid = QCOM_SCM_VMID_MSS_MSA; + next[perms].perm = QCOM_SCM_PERM_RW; + perms++; + } + + return qcom_scm_assign_mem(addr, ALIGN(size, SZ_4K), + current_perm, next, perms); +} + +static void q6v5_debug_policy_load(struct q6v5 *qproc, void *mba_region) +{ + const struct firmware *dp_fw; + + if (request_firmware_direct(&dp_fw, "msadp", qproc->dev)) + return; + + if (SZ_1M + dp_fw->size <= qproc->mba_size) { + memcpy(mba_region + SZ_1M, dp_fw->data, dp_fw->size); + qproc->dp_size = dp_fw->size; + } + + release_firmware(dp_fw); +} + +static int q6v5_load(struct rproc *rproc, const struct firmware *fw) +{ + struct q6v5 *qproc = rproc->priv; + void *mba_region; + + /* MBA is restricted to a maximum size of 1M */ + if (fw->size > qproc->mba_size || fw->size > SZ_1M) { + dev_err(qproc->dev, "MBA firmware load failed\n"); + return -EINVAL; + } + + mba_region = memremap(qproc->mba_phys, qproc->mba_size, MEMREMAP_WC); + if (!mba_region) { + dev_err(qproc->dev, "unable to map memory region: %pa+%zx\n", + &qproc->mba_phys, qproc->mba_size); + return -EBUSY; + } + + memcpy(mba_region, fw->data, fw->size); + q6v5_debug_policy_load(qproc, mba_region); + memunmap(mba_region); + + return 0; +} + +static int q6v5_reset_assert(struct q6v5 *qproc) +{ + int ret; + + if (qproc->has_alt_reset) { + reset_control_assert(qproc->pdc_reset); + ret = reset_control_reset(qproc->mss_restart); + reset_control_deassert(qproc->pdc_reset); + } else if (qproc->has_spare_reg) { + /* + * When the AXI pipeline is being reset with the Q6 modem partly + * operational there is possibility of AXI valid signal to + * glitch, leading to spurious transactions and Q6 hangs. A work + * around is employed by asserting the AXI_GATING_VALID_OVERRIDE + * BIT before triggering Q6 MSS reset. AXI_GATING_VALID_OVERRIDE + * is withdrawn post MSS assert followed by a MSS deassert, + * while holding the PDC reset. + */ + reset_control_assert(qproc->pdc_reset); + regmap_update_bits(qproc->conn_map, qproc->conn_box, + AXI_GATING_VALID_OVERRIDE, 1); + reset_control_assert(qproc->mss_restart); + reset_control_deassert(qproc->pdc_reset); + regmap_update_bits(qproc->conn_map, qproc->conn_box, + AXI_GATING_VALID_OVERRIDE, 0); + ret = reset_control_deassert(qproc->mss_restart); + } else if (qproc->has_ext_cntl_regs) { + regmap_write(qproc->conn_map, qproc->rscc_disable, 0); + reset_control_assert(qproc->pdc_reset); + reset_control_assert(qproc->mss_restart); + reset_control_deassert(qproc->pdc_reset); + ret = reset_control_deassert(qproc->mss_restart); + } else { + ret = reset_control_assert(qproc->mss_restart); + } + + return ret; +} + +static int q6v5_reset_deassert(struct q6v5 *qproc) +{ + int ret; + + if (qproc->has_alt_reset) { + reset_control_assert(qproc->pdc_reset); + writel(1, qproc->rmb_base + RMB_MBA_ALT_RESET); + ret = reset_control_reset(qproc->mss_restart); + writel(0, qproc->rmb_base + RMB_MBA_ALT_RESET); + reset_control_deassert(qproc->pdc_reset); + } else if (qproc->has_spare_reg || qproc->has_ext_cntl_regs) { + ret = reset_control_reset(qproc->mss_restart); + } else { + ret = reset_control_deassert(qproc->mss_restart); + } + + return ret; +} + +static int q6v5_rmb_pbl_wait(struct q6v5 *qproc, int ms) +{ + unsigned long timeout; + s32 val; + + timeout = jiffies + msecs_to_jiffies(ms); + for (;;) { + val = readl(qproc->rmb_base + RMB_PBL_STATUS_REG); + if (val) + break; + + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + + msleep(1); + } + + return val; +} + +static int q6v5_rmb_mba_wait(struct q6v5 *qproc, u32 status, int ms) +{ + + unsigned long timeout; + s32 val; + + timeout = jiffies + msecs_to_jiffies(ms); + for (;;) { + val = readl(qproc->rmb_base + RMB_MBA_STATUS_REG); + if (val < 0) + break; + + if (!status && val) + break; + else if (status && val == status) + break; + + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + + msleep(1); + } + + return val; +} + +static void q6v5_dump_mba_logs(struct q6v5 *qproc) +{ + struct rproc *rproc = qproc->rproc; + void *data; + void *mba_region; + + if (!qproc->has_mba_logs) + return; + + if (q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true, false, qproc->mba_phys, + qproc->mba_size)) + return; + + mba_region = memremap(qproc->mba_phys, qproc->mba_size, MEMREMAP_WC); + if (!mba_region) + return; + + data = vmalloc(MBA_LOG_SIZE); + if (data) { + memcpy(data, mba_region, MBA_LOG_SIZE); + dev_coredumpv(&rproc->dev, data, MBA_LOG_SIZE, GFP_KERNEL); + } + memunmap(mba_region); +} + +static int q6v5proc_reset(struct q6v5 *qproc) +{ + u32 val; + int ret; + int i; + + if (qproc->version == MSS_SDM845) { + val = readl(qproc->reg_base + QDSP6SS_SLEEP); + val |= Q6SS_CBCR_CLKEN; + writel(val, qproc->reg_base + QDSP6SS_SLEEP); + + ret = readl_poll_timeout(qproc->reg_base + QDSP6SS_SLEEP, + val, !(val & Q6SS_CBCR_CLKOFF), 1, + Q6SS_CBCR_TIMEOUT_US); + if (ret) { + dev_err(qproc->dev, "QDSP6SS Sleep clock timed out\n"); + return -ETIMEDOUT; + } + + /* De-assert QDSP6 stop core */ + writel(1, qproc->reg_base + QDSP6SS_BOOT_CORE_START); + /* Trigger boot FSM */ + writel(1, qproc->reg_base + QDSP6SS_BOOT_CMD); + + ret = readl_poll_timeout(qproc->rmb_base + RMB_MBA_MSS_STATUS, + val, (val & BIT(0)) != 0, 10, BOOT_FSM_TIMEOUT); + if (ret) { + dev_err(qproc->dev, "Boot FSM failed to complete.\n"); + /* Reset the modem so that boot FSM is in reset state */ + q6v5_reset_deassert(qproc); + return ret; + } + + goto pbl_wait; + } else if (qproc->version == MSS_SC7180 || qproc->version == MSS_SC7280) { + val = readl(qproc->reg_base + QDSP6SS_SLEEP); + val |= Q6SS_CBCR_CLKEN; + writel(val, qproc->reg_base + QDSP6SS_SLEEP); + + ret = readl_poll_timeout(qproc->reg_base + QDSP6SS_SLEEP, + val, !(val & Q6SS_CBCR_CLKOFF), 1, + Q6SS_CBCR_TIMEOUT_US); + if (ret) { + dev_err(qproc->dev, "QDSP6SS Sleep clock timed out\n"); + return -ETIMEDOUT; + } + + /* Turn on the XO clock needed for PLL setup */ + val = readl(qproc->reg_base + QDSP6SS_XO_CBCR); + val |= Q6SS_CBCR_CLKEN; + writel(val, qproc->reg_base + QDSP6SS_XO_CBCR); + + ret = readl_poll_timeout(qproc->reg_base + QDSP6SS_XO_CBCR, + val, !(val & Q6SS_CBCR_CLKOFF), 1, + Q6SS_CBCR_TIMEOUT_US); + if (ret) { + dev_err(qproc->dev, "QDSP6SS XO clock timed out\n"); + return -ETIMEDOUT; + } + + /* Configure Q6 core CBCR to auto-enable after reset sequence */ + val = readl(qproc->reg_base + QDSP6SS_CORE_CBCR); + val |= Q6SS_CBCR_CLKEN; + writel(val, qproc->reg_base + QDSP6SS_CORE_CBCR); + + /* De-assert the Q6 stop core signal */ + writel(1, qproc->reg_base + QDSP6SS_BOOT_CORE_START); + + /* Wait for 10 us for any staggering logic to settle */ + usleep_range(10, 20); + + /* Trigger the boot FSM to start the Q6 out-of-reset sequence */ + writel(1, qproc->reg_base + QDSP6SS_BOOT_CMD); + + /* Poll the MSS_STATUS for FSM completion */ + ret = readl_poll_timeout(qproc->rmb_base + RMB_MBA_MSS_STATUS, + val, (val & BIT(0)) != 0, 10, BOOT_FSM_TIMEOUT); + if (ret) { + dev_err(qproc->dev, "Boot FSM failed to complete.\n"); + /* Reset the modem so that boot FSM is in reset state */ + q6v5_reset_deassert(qproc); + return ret; + } + goto pbl_wait; + } else if (qproc->version == MSS_MSM8996 || + qproc->version == MSS_MSM8998) { + int mem_pwr_ctl; + + /* Override the ACC value if required */ + writel(QDSP6SS_ACC_OVERRIDE_VAL, + qproc->reg_base + QDSP6SS_STRAP_ACC); + + /* Assert resets, stop core */ + val = readl(qproc->reg_base + QDSP6SS_RESET_REG); + val |= Q6SS_CORE_ARES | Q6SS_BUS_ARES_ENABLE | Q6SS_STOP_CORE; + writel(val, qproc->reg_base + QDSP6SS_RESET_REG); + + /* BHS require xo cbcr to be enabled */ + val = readl(qproc->reg_base + QDSP6SS_XO_CBCR); + val |= Q6SS_CBCR_CLKEN; + writel(val, qproc->reg_base + QDSP6SS_XO_CBCR); + + /* Read CLKOFF bit to go low indicating CLK is enabled */ + ret = readl_poll_timeout(qproc->reg_base + QDSP6SS_XO_CBCR, + val, !(val & Q6SS_CBCR_CLKOFF), 1, + Q6SS_CBCR_TIMEOUT_US); + if (ret) { + dev_err(qproc->dev, + "xo cbcr enabling timed out (rc:%d)\n", ret); + return ret; + } + /* Enable power block headswitch and wait for it to stabilize */ + val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG); + val |= QDSP6v56_BHS_ON; + writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG); + val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG); + udelay(1); + + /* Put LDO in bypass mode */ + val |= QDSP6v56_LDO_BYP; + writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG); + + /* Deassert QDSP6 compiler memory clamp */ + val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG); + val &= ~QDSP6v56_CLAMP_QMC_MEM; + writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG); + + /* Deassert memory peripheral sleep and L2 memory standby */ + val |= Q6SS_L2DATA_STBY_N | Q6SS_SLP_RET_N; + writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG); + + /* Turn on L1, L2, ETB and JU memories 1 at a time */ + if (qproc->version == MSS_MSM8996) { + mem_pwr_ctl = QDSP6SS_MEM_PWR_CTL; + i = 19; + } else { + /* MSS_MSM8998 */ + mem_pwr_ctl = QDSP6V6SS_MEM_PWR_CTL; + i = 28; + } + val = readl(qproc->reg_base + mem_pwr_ctl); + for (; i >= 0; i--) { + val |= BIT(i); + writel(val, qproc->reg_base + mem_pwr_ctl); + /* + * Read back value to ensure the write is done then + * wait for 1us for both memory peripheral and data + * array to turn on. + */ + val |= readl(qproc->reg_base + mem_pwr_ctl); + udelay(1); + } + /* Remove word line clamp */ + val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG); + val &= ~QDSP6v56_CLAMP_WL; + writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG); + } else { + /* Assert resets, stop core */ + val = readl(qproc->reg_base + QDSP6SS_RESET_REG); + val |= Q6SS_CORE_ARES | Q6SS_BUS_ARES_ENABLE | Q6SS_STOP_CORE; + writel(val, qproc->reg_base + QDSP6SS_RESET_REG); + + /* Enable power block headswitch and wait for it to stabilize */ + val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG); + val |= QDSS_BHS_ON | QDSS_LDO_BYP; + writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG); + val |= readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG); + udelay(1); + /* + * Turn on memories. L2 banks should be done individually + * to minimize inrush current. + */ + val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG); + val |= Q6SS_SLP_RET_N | Q6SS_L2TAG_SLP_NRET_N | + Q6SS_ETB_SLP_NRET_N | Q6SS_L2DATA_STBY_N; + writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG); + val |= Q6SS_L2DATA_SLP_NRET_N_2; + writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG); + val |= Q6SS_L2DATA_SLP_NRET_N_1; + writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG); + val |= Q6SS_L2DATA_SLP_NRET_N_0; + writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG); + } + /* Remove IO clamp */ + val &= ~Q6SS_CLAMP_IO; + writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG); + + /* Bring core out of reset */ + val = readl(qproc->reg_base + QDSP6SS_RESET_REG); + val &= ~Q6SS_CORE_ARES; + writel(val, qproc->reg_base + QDSP6SS_RESET_REG); + + /* Turn on core clock */ + val = readl(qproc->reg_base + QDSP6SS_GFMUX_CTL_REG); + val |= Q6SS_CLK_ENABLE; + writel(val, qproc->reg_base + QDSP6SS_GFMUX_CTL_REG); + + /* Start core execution */ + val = readl(qproc->reg_base + QDSP6SS_RESET_REG); + val &= ~Q6SS_STOP_CORE; + writel(val, qproc->reg_base + QDSP6SS_RESET_REG); + +pbl_wait: + /* Wait for PBL status */ + ret = q6v5_rmb_pbl_wait(qproc, 1000); + if (ret == -ETIMEDOUT) { + dev_err(qproc->dev, "PBL boot timed out\n"); + } else if (ret != RMB_PBL_SUCCESS) { + dev_err(qproc->dev, "PBL returned unexpected status %d\n", ret); + ret = -EINVAL; + } else { + ret = 0; + } + + return ret; +} + +static int q6v5proc_enable_qchannel(struct q6v5 *qproc, struct regmap *map, u32 offset) +{ + unsigned int val; + int ret; + + if (!qproc->has_qaccept_regs) + return 0; + + if (qproc->has_ext_cntl_regs) { + regmap_write(qproc->conn_map, qproc->rscc_disable, 0); + regmap_write(qproc->conn_map, qproc->force_clk_on, 1); + + ret = regmap_read_poll_timeout(qproc->halt_map, qproc->axim1_clk_off, val, + !val, 1, Q6SS_CBCR_TIMEOUT_US); + if (ret) { + dev_err(qproc->dev, "failed to enable axim1 clock\n"); + return -ETIMEDOUT; + } + } + + regmap_write(map, offset + QACCEPT_REQ_REG, 1); + + /* Wait for accept */ + ret = regmap_read_poll_timeout(map, offset + QACCEPT_ACCEPT_REG, val, val, 5, + QACCEPT_TIMEOUT_US); + if (ret) { + dev_err(qproc->dev, "qchannel enable failed\n"); + return -ETIMEDOUT; + } + + return 0; +} + +static void q6v5proc_disable_qchannel(struct q6v5 *qproc, struct regmap *map, u32 offset) +{ + int ret; + unsigned int val, retry; + unsigned int nretry = 10; + bool takedown_complete = false; + + if (!qproc->has_qaccept_regs) + return; + + while (!takedown_complete && nretry) { + nretry--; + + /* Wait for active transactions to complete */ + regmap_read_poll_timeout(map, offset + QACCEPT_ACTIVE_REG, val, !val, 5, + QACCEPT_TIMEOUT_US); + + /* Request Q-channel transaction takedown */ + regmap_write(map, offset + QACCEPT_REQ_REG, 0); + + /* + * If the request is denied, reset the Q-channel takedown request, + * wait for active transactions to complete and retry takedown. + */ + retry = 10; + while (retry) { + usleep_range(5, 10); + retry--; + ret = regmap_read(map, offset + QACCEPT_DENY_REG, &val); + if (!ret && val) { + regmap_write(map, offset + QACCEPT_REQ_REG, 1); + break; + } + + ret = regmap_read(map, offset + QACCEPT_ACCEPT_REG, &val); + if (!ret && !val) { + takedown_complete = true; + break; + } + } + + if (!retry) + break; + } + + /* Rely on mss_restart to clear out pending transactions on takedown failure */ + if (!takedown_complete) + dev_err(qproc->dev, "qchannel takedown failed\n"); +} + +static void q6v5proc_halt_axi_port(struct q6v5 *qproc, + struct regmap *halt_map, + u32 offset) +{ + unsigned int val; + int ret; + + /* Check if we're already idle */ + ret = regmap_read(halt_map, offset + AXI_IDLE_REG, &val); + if (!ret && val) + return; + + /* Assert halt request */ + regmap_write(halt_map, offset + AXI_HALTREQ_REG, 1); + + /* Wait for halt */ + regmap_read_poll_timeout(halt_map, offset + AXI_HALTACK_REG, val, + val, 1000, HALT_ACK_TIMEOUT_US); + + ret = regmap_read(halt_map, offset + AXI_IDLE_REG, &val); + if (ret || !val) + dev_err(qproc->dev, "port failed halt\n"); + + /* Clear halt request (port will remain halted until reset) */ + regmap_write(halt_map, offset + AXI_HALTREQ_REG, 0); +} + +static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw, + const char *fw_name) +{ + unsigned long dma_attrs = DMA_ATTR_FORCE_CONTIGUOUS; + dma_addr_t phys; + void *metadata; + int mdata_perm; + int xferop_ret; + size_t size; + void *ptr; + int ret; + + metadata = qcom_mdt_read_metadata(fw, &size, fw_name, qproc->dev); + if (IS_ERR(metadata)) + return PTR_ERR(metadata); + + if (qproc->mdata_phys) { + if (size > qproc->mdata_size) { + ret = -EINVAL; + dev_err(qproc->dev, "metadata size outside memory range\n"); + goto free_metadata; + } + + phys = qproc->mdata_phys; + ptr = memremap(qproc->mdata_phys, size, MEMREMAP_WC); + if (!ptr) { + ret = -EBUSY; + dev_err(qproc->dev, "unable to map memory region: %pa+%zx\n", + &qproc->mdata_phys, size); + goto free_metadata; + } + } else { + ptr = dma_alloc_attrs(qproc->dev, size, &phys, GFP_KERNEL, dma_attrs); + if (!ptr) { + ret = -ENOMEM; + dev_err(qproc->dev, "failed to allocate mdt buffer\n"); + goto free_metadata; + } + } + + memcpy(ptr, metadata, size); + + if (qproc->mdata_phys) + memunmap(ptr); + + /* Hypervisor mapping to access metadata by modem */ + mdata_perm = BIT(QCOM_SCM_VMID_HLOS); + ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, false, true, + phys, size); + if (ret) { + dev_err(qproc->dev, + "assigning Q6 access to metadata failed: %d\n", ret); + ret = -EAGAIN; + goto free_dma_attrs; + } + + writel(phys, qproc->rmb_base + RMB_PMI_META_DATA_REG); + writel(RMB_CMD_META_DATA_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG); + + ret = q6v5_rmb_mba_wait(qproc, RMB_MBA_META_DATA_AUTH_SUCCESS, 1000); + if (ret == -ETIMEDOUT) + dev_err(qproc->dev, "MPSS header authentication timed out\n"); + else if (ret < 0) + dev_err(qproc->dev, "MPSS header authentication failed: %d\n", ret); + + /* Metadata authentication done, remove modem access */ + xferop_ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, true, false, + phys, size); + if (xferop_ret) + dev_warn(qproc->dev, + "mdt buffer not reclaimed system may become unstable\n"); + +free_dma_attrs: + if (!qproc->mdata_phys) + dma_free_attrs(qproc->dev, size, ptr, phys, dma_attrs); +free_metadata: + kfree(metadata); + + return ret < 0 ? ret : 0; +} + +static bool q6v5_phdr_valid(const struct elf32_phdr *phdr) +{ + if (phdr->p_type != PT_LOAD) + return false; + + if ((phdr->p_flags & QCOM_MDT_TYPE_MASK) == QCOM_MDT_TYPE_HASH) + return false; + + if (!phdr->p_memsz) + return false; + + return true; +} + +static int q6v5_mba_load(struct q6v5 *qproc) +{ + int ret; + int xfermemop_ret; + bool mba_load_err = false; + + ret = qcom_q6v5_prepare(&qproc->q6v5); + if (ret) + return ret; + + ret = q6v5_pds_enable(qproc, qproc->proxy_pds, qproc->proxy_pd_count); + if (ret < 0) { + dev_err(qproc->dev, "failed to enable proxy power domains\n"); + goto disable_irqs; + } + + ret = q6v5_regulator_enable(qproc, qproc->fallback_proxy_regs, + qproc->fallback_proxy_reg_count); + if (ret) { + dev_err(qproc->dev, "failed to enable fallback proxy supplies\n"); + goto disable_proxy_pds; + } + + ret = q6v5_regulator_enable(qproc, qproc->proxy_regs, + qproc->proxy_reg_count); + if (ret) { + dev_err(qproc->dev, "failed to enable proxy supplies\n"); + goto disable_fallback_proxy_reg; + } + + ret = q6v5_clk_enable(qproc->dev, qproc->proxy_clks, + qproc->proxy_clk_count); + if (ret) { + dev_err(qproc->dev, "failed to enable proxy clocks\n"); + goto disable_proxy_reg; + } + + ret = q6v5_regulator_enable(qproc, qproc->active_regs, + qproc->active_reg_count); + if (ret) { + dev_err(qproc->dev, "failed to enable supplies\n"); + goto disable_proxy_clk; + } + + ret = q6v5_clk_enable(qproc->dev, qproc->reset_clks, + qproc->reset_clk_count); + if (ret) { + dev_err(qproc->dev, "failed to enable reset clocks\n"); + goto disable_vdd; + } + + ret = q6v5_reset_deassert(qproc); + if (ret) { + dev_err(qproc->dev, "failed to deassert mss restart\n"); + goto disable_reset_clks; + } + + ret = q6v5_clk_enable(qproc->dev, qproc->active_clks, + qproc->active_clk_count); + if (ret) { + dev_err(qproc->dev, "failed to enable clocks\n"); + goto assert_reset; + } + + ret = q6v5proc_enable_qchannel(qproc, qproc->halt_map, qproc->qaccept_axi); + if (ret) { + dev_err(qproc->dev, "failed to enable axi bridge\n"); + goto disable_active_clks; + } + + /* + * Some versions of the MBA firmware will upon boot wipe the MPSS region as well, so provide + * the Q6 access to this region. + */ + ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false, true, + qproc->mpss_phys, qproc->mpss_size); + if (ret) { + dev_err(qproc->dev, "assigning Q6 access to mpss memory failed: %d\n", ret); + goto disable_active_clks; + } + + /* Assign MBA image access in DDR to q6 */ + ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false, true, + qproc->mba_phys, qproc->mba_size); + if (ret) { + dev_err(qproc->dev, + "assigning Q6 access to mba memory failed: %d\n", ret); + goto disable_active_clks; + } + + writel(qproc->mba_phys, qproc->rmb_base + RMB_MBA_IMAGE_REG); + if (qproc->dp_size) { + writel(qproc->mba_phys + SZ_1M, qproc->rmb_base + RMB_PMI_CODE_START_REG); + writel(qproc->dp_size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG); + } + + ret = q6v5proc_reset(qproc); + if (ret) + goto reclaim_mba; + + if (qproc->has_mba_logs) + qcom_pil_info_store("mba", qproc->mba_phys, MBA_LOG_SIZE); + + ret = q6v5_rmb_mba_wait(qproc, 0, 5000); + if (ret == -ETIMEDOUT) { + dev_err(qproc->dev, "MBA boot timed out\n"); + goto halt_axi_ports; + } else if (ret != RMB_MBA_XPU_UNLOCKED && + ret != RMB_MBA_XPU_UNLOCKED_SCRIBBLED) { + dev_err(qproc->dev, "MBA returned unexpected status %d\n", ret); + ret = -EINVAL; + goto halt_axi_ports; + } + + qproc->dump_mba_loaded = true; + return 0; + +halt_axi_ports: + q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6); + if (qproc->has_vq6) + q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_vq6); + q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem); + q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc); + q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_mdm); + q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_cx); + q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_axi); + mba_load_err = true; +reclaim_mba: + xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true, + false, qproc->mba_phys, + qproc->mba_size); + if (xfermemop_ret) { + dev_err(qproc->dev, + "Failed to reclaim mba buffer, system may become unstable\n"); + } else if (mba_load_err) { + q6v5_dump_mba_logs(qproc); + } + +disable_active_clks: + q6v5_clk_disable(qproc->dev, qproc->active_clks, + qproc->active_clk_count); +assert_reset: + q6v5_reset_assert(qproc); +disable_reset_clks: + q6v5_clk_disable(qproc->dev, qproc->reset_clks, + qproc->reset_clk_count); +disable_vdd: + q6v5_regulator_disable(qproc, qproc->active_regs, + qproc->active_reg_count); +disable_proxy_clk: + q6v5_clk_disable(qproc->dev, qproc->proxy_clks, + qproc->proxy_clk_count); +disable_proxy_reg: + q6v5_regulator_disable(qproc, qproc->proxy_regs, + qproc->proxy_reg_count); +disable_fallback_proxy_reg: + q6v5_regulator_disable(qproc, qproc->fallback_proxy_regs, + qproc->fallback_proxy_reg_count); +disable_proxy_pds: + q6v5_pds_disable(qproc, qproc->proxy_pds, qproc->proxy_pd_count); +disable_irqs: + qcom_q6v5_unprepare(&qproc->q6v5); + + return ret; +} + +static void q6v5_mba_reclaim(struct q6v5 *qproc) +{ + int ret; + u32 val; + + qproc->dump_mba_loaded = false; + qproc->dp_size = 0; + + q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_q6); + if (qproc->has_vq6) + q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_vq6); + q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem); + q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc); + if (qproc->version == MSS_MSM8996) { + /* + * To avoid high MX current during LPASS/MSS restart. + */ + val = readl(qproc->reg_base + QDSP6SS_PWR_CTL_REG); + val |= Q6SS_CLAMP_IO | QDSP6v56_CLAMP_WL | + QDSP6v56_CLAMP_QMC_MEM; + writel(val, qproc->reg_base + QDSP6SS_PWR_CTL_REG); + } + + if (qproc->has_ext_cntl_regs) { + regmap_write(qproc->conn_map, qproc->rscc_disable, 1); + + ret = regmap_read_poll_timeout(qproc->halt_map, qproc->axim1_clk_off, val, + !val, 1, Q6SS_CBCR_TIMEOUT_US); + if (ret) + dev_err(qproc->dev, "failed to enable axim1 clock\n"); + + ret = regmap_read_poll_timeout(qproc->halt_map, qproc->crypto_clk_off, val, + !val, 1, Q6SS_CBCR_TIMEOUT_US); + if (ret) + dev_err(qproc->dev, "failed to enable crypto clock\n"); + } + + q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_mdm); + q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_cx); + q6v5proc_disable_qchannel(qproc, qproc->halt_map, qproc->qaccept_axi); + + q6v5_reset_assert(qproc); + + q6v5_clk_disable(qproc->dev, qproc->reset_clks, + qproc->reset_clk_count); + q6v5_clk_disable(qproc->dev, qproc->active_clks, + qproc->active_clk_count); + q6v5_regulator_disable(qproc, qproc->active_regs, + qproc->active_reg_count); + + /* In case of failure or coredump scenario where reclaiming MBA memory + * could not happen reclaim it here. + */ + ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true, false, + qproc->mba_phys, + qproc->mba_size); + WARN_ON(ret); + + ret = qcom_q6v5_unprepare(&qproc->q6v5); + if (ret) { + q6v5_pds_disable(qproc, qproc->proxy_pds, + qproc->proxy_pd_count); + q6v5_clk_disable(qproc->dev, qproc->proxy_clks, + qproc->proxy_clk_count); + q6v5_regulator_disable(qproc, qproc->fallback_proxy_regs, + qproc->fallback_proxy_reg_count); + q6v5_regulator_disable(qproc, qproc->proxy_regs, + qproc->proxy_reg_count); + } +} + +static int q6v5_reload_mba(struct rproc *rproc) +{ + struct q6v5 *qproc = rproc->priv; + const struct firmware *fw; + int ret; + + ret = request_firmware(&fw, rproc->firmware, qproc->dev); + if (ret < 0) + return ret; + + q6v5_load(rproc, fw); + ret = q6v5_mba_load(qproc); + release_firmware(fw); + + return ret; +} + +static int q6v5_mpss_load(struct q6v5 *qproc) +{ + const struct elf32_phdr *phdrs; + const struct elf32_phdr *phdr; + const struct firmware *seg_fw; + const struct firmware *fw; + struct elf32_hdr *ehdr; + phys_addr_t mpss_reloc; + phys_addr_t boot_addr; + phys_addr_t min_addr = PHYS_ADDR_MAX; + phys_addr_t max_addr = 0; + u32 code_length; + bool relocate = false; + char *fw_name; + size_t fw_name_len; + ssize_t offset; + size_t size = 0; + void *ptr; + int ret; + int i; + + fw_name_len = strlen(qproc->hexagon_mdt_image); + if (fw_name_len <= 4) + return -EINVAL; + + fw_name = kstrdup(qproc->hexagon_mdt_image, GFP_KERNEL); + if (!fw_name) + return -ENOMEM; + + ret = request_firmware(&fw, fw_name, qproc->dev); + if (ret < 0) { + dev_err(qproc->dev, "unable to load %s\n", fw_name); + goto out; + } + + /* Initialize the RMB validator */ + writel(0, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG); + + ret = q6v5_mpss_init_image(qproc, fw, qproc->hexagon_mdt_image); + if (ret) + goto release_firmware; + + ehdr = (struct elf32_hdr *)fw->data; + phdrs = (struct elf32_phdr *)(ehdr + 1); + + for (i = 0; i < ehdr->e_phnum; i++) { + phdr = &phdrs[i]; + + if (!q6v5_phdr_valid(phdr)) + continue; + + if (phdr->p_flags & QCOM_MDT_RELOCATABLE) + relocate = true; + + if (phdr->p_paddr < min_addr) + min_addr = phdr->p_paddr; + + if (phdr->p_paddr + phdr->p_memsz > max_addr) + max_addr = ALIGN(phdr->p_paddr + phdr->p_memsz, SZ_4K); + } + + /* + * In case of a modem subsystem restart on secure devices, the modem + * memory can be reclaimed only after MBA is loaded. + */ + q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true, false, + qproc->mpss_phys, qproc->mpss_size); + + /* Share ownership between Linux and MSS, during segment loading */ + ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true, true, + qproc->mpss_phys, qproc->mpss_size); + if (ret) { + dev_err(qproc->dev, + "assigning Q6 access to mpss memory failed: %d\n", ret); + ret = -EAGAIN; + goto release_firmware; + } + + mpss_reloc = relocate ? min_addr : qproc->mpss_phys; + qproc->mpss_reloc = mpss_reloc; + /* Load firmware segments */ + for (i = 0; i < ehdr->e_phnum; i++) { + phdr = &phdrs[i]; + + if (!q6v5_phdr_valid(phdr)) + continue; + + offset = phdr->p_paddr - mpss_reloc; + if (offset < 0 || offset + phdr->p_memsz > qproc->mpss_size) { + dev_err(qproc->dev, "segment outside memory range\n"); + ret = -EINVAL; + goto release_firmware; + } + + if (phdr->p_filesz > phdr->p_memsz) { + dev_err(qproc->dev, + "refusing to load segment %d with p_filesz > p_memsz\n", + i); + ret = -EINVAL; + goto release_firmware; + } + + ptr = memremap(qproc->mpss_phys + offset, phdr->p_memsz, MEMREMAP_WC); + if (!ptr) { + dev_err(qproc->dev, + "unable to map memory region: %pa+%zx-%x\n", + &qproc->mpss_phys, offset, phdr->p_memsz); + goto release_firmware; + } + + if (phdr->p_filesz && phdr->p_offset < fw->size) { + /* Firmware is large enough to be non-split */ + if (phdr->p_offset + phdr->p_filesz > fw->size) { + dev_err(qproc->dev, + "failed to load segment %d from truncated file %s\n", + i, fw_name); + ret = -EINVAL; + memunmap(ptr); + goto release_firmware; + } + + memcpy(ptr, fw->data + phdr->p_offset, phdr->p_filesz); + } else if (phdr->p_filesz) { + /* Replace "xxx.xxx" with "xxx.bxx" */ + sprintf(fw_name + fw_name_len - 3, "b%02d", i); + ret = request_firmware_into_buf(&seg_fw, fw_name, qproc->dev, + ptr, phdr->p_filesz); + if (ret) { + dev_err(qproc->dev, "failed to load %s\n", fw_name); + memunmap(ptr); + goto release_firmware; + } + + if (seg_fw->size != phdr->p_filesz) { + dev_err(qproc->dev, + "failed to load segment %d from truncated file %s\n", + i, fw_name); + ret = -EINVAL; + release_firmware(seg_fw); + memunmap(ptr); + goto release_firmware; + } + + release_firmware(seg_fw); + } + + if (phdr->p_memsz > phdr->p_filesz) { + memset(ptr + phdr->p_filesz, 0, + phdr->p_memsz - phdr->p_filesz); + } + memunmap(ptr); + size += phdr->p_memsz; + + code_length = readl(qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG); + if (!code_length) { + boot_addr = relocate ? qproc->mpss_phys : min_addr; + writel(boot_addr, qproc->rmb_base + RMB_PMI_CODE_START_REG); + writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG); + } + writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG); + + ret = readl(qproc->rmb_base + RMB_MBA_STATUS_REG); + if (ret < 0) { + dev_err(qproc->dev, "MPSS authentication failed: %d\n", + ret); + goto release_firmware; + } + } + + /* Transfer ownership of modem ddr region to q6 */ + ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false, true, + qproc->mpss_phys, qproc->mpss_size); + if (ret) { + dev_err(qproc->dev, + "assigning Q6 access to mpss memory failed: %d\n", ret); + ret = -EAGAIN; + goto release_firmware; + } + + ret = q6v5_rmb_mba_wait(qproc, RMB_MBA_AUTH_COMPLETE, 10000); + if (ret == -ETIMEDOUT) + dev_err(qproc->dev, "MPSS authentication timed out\n"); + else if (ret < 0) + dev_err(qproc->dev, "MPSS authentication failed: %d\n", ret); + + qcom_pil_info_store("modem", qproc->mpss_phys, qproc->mpss_size); + +release_firmware: + release_firmware(fw); +out: + kfree(fw_name); + + return ret < 0 ? ret : 0; +} + +static void qcom_q6v5_dump_segment(struct rproc *rproc, + struct rproc_dump_segment *segment, + void *dest, size_t cp_offset, size_t size) +{ + int ret = 0; + struct q6v5 *qproc = rproc->priv; + int offset = segment->da - qproc->mpss_reloc; + void *ptr = NULL; + + /* Unlock mba before copying segments */ + if (!qproc->dump_mba_loaded) { + ret = q6v5_reload_mba(rproc); + if (!ret) { + /* Reset ownership back to Linux to copy segments */ + ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, + true, false, + qproc->mpss_phys, + qproc->mpss_size); + } + } + + if (!ret) + ptr = memremap(qproc->mpss_phys + offset + cp_offset, size, MEMREMAP_WC); + + if (ptr) { + memcpy(dest, ptr, size); + memunmap(ptr); + } else { + memset(dest, 0xff, size); + } + + qproc->current_dump_size += size; + + /* Reclaim mba after copying segments */ + if (qproc->current_dump_size == qproc->total_dump_size) { + if (qproc->dump_mba_loaded) { + /* Try to reset ownership back to Q6 */ + q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, + false, true, + qproc->mpss_phys, + qproc->mpss_size); + q6v5_mba_reclaim(qproc); + } + } +} + +static int q6v5_start(struct rproc *rproc) +{ + struct q6v5 *qproc = (struct q6v5 *)rproc->priv; + int xfermemop_ret; + int ret; + + ret = q6v5_mba_load(qproc); + if (ret) + return ret; + + dev_info(qproc->dev, "MBA booted with%s debug policy, loading mpss\n", + qproc->dp_size ? "" : "out"); + + ret = q6v5_mpss_load(qproc); + if (ret) + goto reclaim_mpss; + + ret = qcom_q6v5_wait_for_start(&qproc->q6v5, msecs_to_jiffies(5000)); + if (ret == -ETIMEDOUT) { + dev_err(qproc->dev, "start timed out\n"); + goto reclaim_mpss; + } + + xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true, + false, qproc->mba_phys, + qproc->mba_size); + if (xfermemop_ret) + dev_err(qproc->dev, + "Failed to reclaim mba buffer system may become unstable\n"); + + /* Reset Dump Segment Mask */ + qproc->current_dump_size = 0; + + return 0; + +reclaim_mpss: + q6v5_mba_reclaim(qproc); + q6v5_dump_mba_logs(qproc); + + return ret; +} + +static int q6v5_stop(struct rproc *rproc) +{ + struct q6v5 *qproc = (struct q6v5 *)rproc->priv; + int ret; + + ret = qcom_q6v5_request_stop(&qproc->q6v5, qproc->sysmon); + if (ret == -ETIMEDOUT) + dev_err(qproc->dev, "timed out on wait\n"); + + q6v5_mba_reclaim(qproc); + + return 0; +} + +static int qcom_q6v5_register_dump_segments(struct rproc *rproc, + const struct firmware *mba_fw) +{ + const struct firmware *fw; + const struct elf32_phdr *phdrs; + const struct elf32_phdr *phdr; + const struct elf32_hdr *ehdr; + struct q6v5 *qproc = rproc->priv; + unsigned long i; + int ret; + + ret = request_firmware(&fw, qproc->hexagon_mdt_image, qproc->dev); + if (ret < 0) { + dev_err(qproc->dev, "unable to load %s\n", + qproc->hexagon_mdt_image); + return ret; + } + + rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE); + + ehdr = (struct elf32_hdr *)fw->data; + phdrs = (struct elf32_phdr *)(ehdr + 1); + qproc->total_dump_size = 0; + + for (i = 0; i < ehdr->e_phnum; i++) { + phdr = &phdrs[i]; + + if (!q6v5_phdr_valid(phdr)) + continue; + + ret = rproc_coredump_add_custom_segment(rproc, phdr->p_paddr, + phdr->p_memsz, + qcom_q6v5_dump_segment, + NULL); + if (ret) + break; + + qproc->total_dump_size += phdr->p_memsz; + } + + release_firmware(fw); + return ret; +} + +static unsigned long q6v5_panic(struct rproc *rproc) +{ + struct q6v5 *qproc = (struct q6v5 *)rproc->priv; + + return qcom_q6v5_panic(&qproc->q6v5); +} + +static const struct rproc_ops q6v5_ops = { + .start = q6v5_start, + .stop = q6v5_stop, + .parse_fw = qcom_q6v5_register_dump_segments, + .load = q6v5_load, + .panic = q6v5_panic, +}; + +static void qcom_msa_handover(struct qcom_q6v5 *q6v5) +{ + struct q6v5 *qproc = container_of(q6v5, struct q6v5, q6v5); + + q6v5_clk_disable(qproc->dev, qproc->proxy_clks, + qproc->proxy_clk_count); + q6v5_regulator_disable(qproc, qproc->proxy_regs, + qproc->proxy_reg_count); + q6v5_regulator_disable(qproc, qproc->fallback_proxy_regs, + qproc->fallback_proxy_reg_count); + q6v5_pds_disable(qproc, qproc->proxy_pds, qproc->proxy_pd_count); +} + +static int q6v5_init_mem(struct q6v5 *qproc, struct platform_device *pdev) +{ + struct of_phandle_args args; + int halt_cell_cnt = 3; + int ret; + + qproc->reg_base = devm_platform_ioremap_resource_byname(pdev, "qdsp6"); + if (IS_ERR(qproc->reg_base)) + return PTR_ERR(qproc->reg_base); + + qproc->rmb_base = devm_platform_ioremap_resource_byname(pdev, "rmb"); + if (IS_ERR(qproc->rmb_base)) + return PTR_ERR(qproc->rmb_base); + + if (qproc->has_vq6) + halt_cell_cnt++; + + ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node, + "qcom,halt-regs", halt_cell_cnt, 0, &args); + if (ret < 0) { + dev_err(&pdev->dev, "failed to parse qcom,halt-regs\n"); + return -EINVAL; + } + + qproc->halt_map = syscon_node_to_regmap(args.np); + of_node_put(args.np); + if (IS_ERR(qproc->halt_map)) + return PTR_ERR(qproc->halt_map); + + qproc->halt_q6 = args.args[0]; + qproc->halt_modem = args.args[1]; + qproc->halt_nc = args.args[2]; + + if (qproc->has_vq6) + qproc->halt_vq6 = args.args[3]; + + if (qproc->has_qaccept_regs) { + ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node, + "qcom,qaccept-regs", + 3, 0, &args); + if (ret < 0) { + dev_err(&pdev->dev, "failed to parse qaccept-regs\n"); + return -EINVAL; + } + + qproc->qaccept_mdm = args.args[0]; + qproc->qaccept_cx = args.args[1]; + qproc->qaccept_axi = args.args[2]; + } + + if (qproc->has_ext_cntl_regs) { + ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node, + "qcom,ext-regs", + 2, 0, &args); + if (ret < 0) { + dev_err(&pdev->dev, "failed to parse ext-regs index 0\n"); + return -EINVAL; + } + + qproc->conn_map = syscon_node_to_regmap(args.np); + of_node_put(args.np); + if (IS_ERR(qproc->conn_map)) + return PTR_ERR(qproc->conn_map); + + qproc->force_clk_on = args.args[0]; + qproc->rscc_disable = args.args[1]; + + ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node, + "qcom,ext-regs", + 2, 1, &args); + if (ret < 0) { + dev_err(&pdev->dev, "failed to parse ext-regs index 1\n"); + return -EINVAL; + } + + qproc->axim1_clk_off = args.args[0]; + qproc->crypto_clk_off = args.args[1]; + } + + if (qproc->has_spare_reg) { + ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node, + "qcom,spare-regs", + 1, 0, &args); + if (ret < 0) { + dev_err(&pdev->dev, "failed to parse spare-regs\n"); + return -EINVAL; + } + + qproc->conn_map = syscon_node_to_regmap(args.np); + of_node_put(args.np); + if (IS_ERR(qproc->conn_map)) + return PTR_ERR(qproc->conn_map); + + qproc->conn_box = args.args[0]; + } + + return 0; +} + +static int q6v5_init_clocks(struct device *dev, struct clk **clks, + char **clk_names) +{ + int i; + + if (!clk_names) + return 0; + + for (i = 0; clk_names[i]; i++) { + clks[i] = devm_clk_get(dev, clk_names[i]); + if (IS_ERR(clks[i])) { + int rc = PTR_ERR(clks[i]); + + if (rc != -EPROBE_DEFER) + dev_err(dev, "Failed to get %s clock\n", + clk_names[i]); + return rc; + } + } + + return i; +} + +static int q6v5_pds_attach(struct device *dev, struct device **devs, + char **pd_names) +{ + size_t num_pds = 0; + int ret; + int i; + + if (!pd_names) + return 0; + + while (pd_names[num_pds]) + num_pds++; + + for (i = 0; i < num_pds; i++) { + devs[i] = dev_pm_domain_attach_by_name(dev, pd_names[i]); + if (IS_ERR_OR_NULL(devs[i])) { + ret = PTR_ERR(devs[i]) ? : -ENODATA; + goto unroll_attach; + } + } + + return num_pds; + +unroll_attach: + for (i--; i >= 0; i--) + dev_pm_domain_detach(devs[i], false); + + return ret; +} + +static void q6v5_pds_detach(struct q6v5 *qproc, struct device **pds, + size_t pd_count) +{ + int i; + + for (i = 0; i < pd_count; i++) + dev_pm_domain_detach(pds[i], false); +} + +static int q6v5_init_reset(struct q6v5 *qproc) +{ + qproc->mss_restart = devm_reset_control_get_exclusive(qproc->dev, + "mss_restart"); + if (IS_ERR(qproc->mss_restart)) { + dev_err(qproc->dev, "failed to acquire mss restart\n"); + return PTR_ERR(qproc->mss_restart); + } + + if (qproc->has_alt_reset || qproc->has_spare_reg || qproc->has_ext_cntl_regs) { + qproc->pdc_reset = devm_reset_control_get_exclusive(qproc->dev, + "pdc_reset"); + if (IS_ERR(qproc->pdc_reset)) { + dev_err(qproc->dev, "failed to acquire pdc reset\n"); + return PTR_ERR(qproc->pdc_reset); + } + } + + return 0; +} + +static int q6v5_alloc_memory_region(struct q6v5 *qproc) +{ + struct device_node *child; + struct reserved_mem *rmem; + struct device_node *node; + struct resource r; + int ret; + + /* + * In the absence of mba/mpss sub-child, extract the mba and mpss + * reserved memory regions from device's memory-region property. + */ + child = of_get_child_by_name(qproc->dev->of_node, "mba"); + if (!child) { + node = of_parse_phandle(qproc->dev->of_node, + "memory-region", 0); + } else { + node = of_parse_phandle(child, "memory-region", 0); + of_node_put(child); + } + + ret = of_address_to_resource(node, 0, &r); + of_node_put(node); + if (ret) { + dev_err(qproc->dev, "unable to resolve mba region\n"); + return ret; + } + + qproc->mba_phys = r.start; + qproc->mba_size = resource_size(&r); + + if (!child) { + node = of_parse_phandle(qproc->dev->of_node, + "memory-region", 1); + } else { + child = of_get_child_by_name(qproc->dev->of_node, "mpss"); + node = of_parse_phandle(child, "memory-region", 0); + of_node_put(child); + } + + ret = of_address_to_resource(node, 0, &r); + of_node_put(node); + if (ret) { + dev_err(qproc->dev, "unable to resolve mpss region\n"); + return ret; + } + + qproc->mpss_phys = qproc->mpss_reloc = r.start; + qproc->mpss_size = resource_size(&r); + + if (!child) { + node = of_parse_phandle(qproc->dev->of_node, "memory-region", 2); + } else { + child = of_get_child_by_name(qproc->dev->of_node, "metadata"); + node = of_parse_phandle(child, "memory-region", 0); + of_node_put(child); + } + + if (!node) + return 0; + + rmem = of_reserved_mem_lookup(node); + if (!rmem) { + dev_err(qproc->dev, "unable to resolve metadata region\n"); + return -EINVAL; + } + + qproc->mdata_phys = rmem->base; + qproc->mdata_size = rmem->size; + + return 0; +} + +static int q6v5_probe(struct platform_device *pdev) +{ + const struct rproc_hexagon_res *desc; + struct device_node *node; + struct q6v5 *qproc; + struct rproc *rproc; + const char *mba_image; + int ret; + + desc = of_device_get_match_data(&pdev->dev); + if (!desc) + return -EINVAL; + + if (desc->need_mem_protection && !qcom_scm_is_available()) + return -EPROBE_DEFER; + + mba_image = desc->hexagon_mba_image; + ret = of_property_read_string_index(pdev->dev.of_node, "firmware-name", + 0, &mba_image); + if (ret < 0 && ret != -EINVAL) { + dev_err(&pdev->dev, "unable to read mba firmware-name\n"); + return ret; + } + + rproc = rproc_alloc(&pdev->dev, pdev->name, &q6v5_ops, + mba_image, sizeof(*qproc)); + if (!rproc) { + dev_err(&pdev->dev, "failed to allocate rproc\n"); + return -ENOMEM; + } + + rproc->auto_boot = false; + rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE); + + qproc = (struct q6v5 *)rproc->priv; + qproc->dev = &pdev->dev; + qproc->rproc = rproc; + qproc->hexagon_mdt_image = "modem.mdt"; + ret = of_property_read_string_index(pdev->dev.of_node, "firmware-name", + 1, &qproc->hexagon_mdt_image); + if (ret < 0 && ret != -EINVAL) { + dev_err(&pdev->dev, "unable to read mpss firmware-name\n"); + goto free_rproc; + } + + platform_set_drvdata(pdev, qproc); + + qproc->has_qaccept_regs = desc->has_qaccept_regs; + qproc->has_ext_cntl_regs = desc->has_ext_cntl_regs; + qproc->has_vq6 = desc->has_vq6; + qproc->has_spare_reg = desc->has_spare_reg; + ret = q6v5_init_mem(qproc, pdev); + if (ret) + goto free_rproc; + + ret = q6v5_alloc_memory_region(qproc); + if (ret) + goto free_rproc; + + ret = q6v5_init_clocks(&pdev->dev, qproc->proxy_clks, + desc->proxy_clk_names); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to get proxy clocks.\n"); + goto free_rproc; + } + qproc->proxy_clk_count = ret; + + ret = q6v5_init_clocks(&pdev->dev, qproc->reset_clks, + desc->reset_clk_names); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to get reset clocks.\n"); + goto free_rproc; + } + qproc->reset_clk_count = ret; + + ret = q6v5_init_clocks(&pdev->dev, qproc->active_clks, + desc->active_clk_names); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to get active clocks.\n"); + goto free_rproc; + } + qproc->active_clk_count = ret; + + ret = q6v5_regulator_init(&pdev->dev, qproc->proxy_regs, + desc->proxy_supply); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to get proxy regulators.\n"); + goto free_rproc; + } + qproc->proxy_reg_count = ret; + + ret = q6v5_regulator_init(&pdev->dev, qproc->active_regs, + desc->active_supply); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to get active regulators.\n"); + goto free_rproc; + } + qproc->active_reg_count = ret; + + ret = q6v5_pds_attach(&pdev->dev, qproc->proxy_pds, + desc->proxy_pd_names); + /* Fallback to regulators for old device trees */ + if (ret == -ENODATA && desc->fallback_proxy_supply) { + ret = q6v5_regulator_init(&pdev->dev, + qproc->fallback_proxy_regs, + desc->fallback_proxy_supply); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to get fallback proxy regulators.\n"); + goto free_rproc; + } + qproc->fallback_proxy_reg_count = ret; + } else if (ret < 0) { + dev_err(&pdev->dev, "Failed to init power domains\n"); + goto free_rproc; + } else { + qproc->proxy_pd_count = ret; + } + + qproc->has_alt_reset = desc->has_alt_reset; + ret = q6v5_init_reset(qproc); + if (ret) + goto detach_proxy_pds; + + qproc->version = desc->version; + qproc->need_mem_protection = desc->need_mem_protection; + qproc->has_mba_logs = desc->has_mba_logs; + + ret = qcom_q6v5_init(&qproc->q6v5, pdev, rproc, MPSS_CRASH_REASON_SMEM, "modem", + qcom_msa_handover); + if (ret) + goto detach_proxy_pds; + + qproc->mpss_perm = BIT(QCOM_SCM_VMID_HLOS); + qproc->mba_perm = BIT(QCOM_SCM_VMID_HLOS); + qcom_add_glink_subdev(rproc, &qproc->glink_subdev, "mpss"); + qcom_add_smd_subdev(rproc, &qproc->smd_subdev); + qcom_add_ssr_subdev(rproc, &qproc->ssr_subdev, "mpss"); + qproc->sysmon = qcom_add_sysmon_subdev(rproc, "modem", 0x12); + if (IS_ERR(qproc->sysmon)) { + ret = PTR_ERR(qproc->sysmon); + goto remove_subdevs; + } + + ret = rproc_add(rproc); + if (ret) + goto remove_sysmon_subdev; + + node = of_get_compatible_child(pdev->dev.of_node, "qcom,bam-dmux"); + qproc->bam_dmux = of_platform_device_create(node, NULL, &pdev->dev); + of_node_put(node); + + return 0; + +remove_sysmon_subdev: + qcom_remove_sysmon_subdev(qproc->sysmon); +remove_subdevs: + qcom_remove_ssr_subdev(rproc, &qproc->ssr_subdev); + qcom_remove_smd_subdev(rproc, &qproc->smd_subdev); + qcom_remove_glink_subdev(rproc, &qproc->glink_subdev); +detach_proxy_pds: + q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count); +free_rproc: + rproc_free(rproc); + + return ret; +} + +static int q6v5_remove(struct platform_device *pdev) +{ + struct q6v5 *qproc = platform_get_drvdata(pdev); + struct rproc *rproc = qproc->rproc; + + if (qproc->bam_dmux) + of_platform_device_destroy(&qproc->bam_dmux->dev, NULL); + rproc_del(rproc); + + qcom_q6v5_deinit(&qproc->q6v5); + qcom_remove_sysmon_subdev(qproc->sysmon); + qcom_remove_ssr_subdev(rproc, &qproc->ssr_subdev); + qcom_remove_smd_subdev(rproc, &qproc->smd_subdev); + qcom_remove_glink_subdev(rproc, &qproc->glink_subdev); + + q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count); + + rproc_free(rproc); + + return 0; +} + +static const struct rproc_hexagon_res sc7180_mss = { + .hexagon_mba_image = "mba.mbn", + .proxy_clk_names = (char*[]){ + "xo", + NULL + }, + .reset_clk_names = (char*[]){ + "iface", + "bus", + "snoc_axi", + NULL + }, + .active_clk_names = (char*[]){ + "mnoc_axi", + "nav", + NULL + }, + .proxy_pd_names = (char*[]){ + "cx", + "mx", + "mss", + NULL + }, + .need_mem_protection = true, + .has_alt_reset = false, + .has_mba_logs = true, + .has_spare_reg = true, + .has_qaccept_regs = false, + .has_ext_cntl_regs = false, + .has_vq6 = false, + .version = MSS_SC7180, +}; + +static const struct rproc_hexagon_res sc7280_mss = { + .hexagon_mba_image = "mba.mbn", + .proxy_clk_names = (char*[]){ + "xo", + "pka", + NULL + }, + .active_clk_names = (char*[]){ + "iface", + "offline", + "snoc_axi", + NULL + }, + .proxy_pd_names = (char*[]){ + "cx", + "mss", + NULL + }, + .need_mem_protection = true, + .has_alt_reset = false, + .has_mba_logs = true, + .has_spare_reg = false, + .has_qaccept_regs = true, + .has_ext_cntl_regs = true, + .has_vq6 = true, + .version = MSS_SC7280, +}; + +static const struct rproc_hexagon_res sdm845_mss = { + .hexagon_mba_image = "mba.mbn", + .proxy_clk_names = (char*[]){ + "xo", + "prng", + NULL + }, + .reset_clk_names = (char*[]){ + "iface", + "snoc_axi", + NULL + }, + .active_clk_names = (char*[]){ + "bus", + "mem", + "gpll0_mss", + "mnoc_axi", + NULL + }, + .proxy_pd_names = (char*[]){ + "cx", + "mx", + "mss", + NULL + }, + .need_mem_protection = true, + .has_alt_reset = true, + .has_mba_logs = false, + .has_spare_reg = false, + .has_qaccept_regs = false, + .has_ext_cntl_regs = false, + .has_vq6 = false, + .version = MSS_SDM845, +}; + +static const struct rproc_hexagon_res msm8998_mss = { + .hexagon_mba_image = "mba.mbn", + .proxy_clk_names = (char*[]){ + "xo", + "qdss", + "mem", + NULL + }, + .active_clk_names = (char*[]){ + "iface", + "bus", + "gpll0_mss", + "mnoc_axi", + "snoc_axi", + NULL + }, + .proxy_pd_names = (char*[]){ + "cx", + "mx", + NULL + }, + .need_mem_protection = true, + .has_alt_reset = false, + .has_mba_logs = false, + .has_spare_reg = false, + .has_qaccept_regs = false, + .has_ext_cntl_regs = false, + .has_vq6 = false, + .version = MSS_MSM8998, +}; + +static const struct rproc_hexagon_res msm8996_mss = { + .hexagon_mba_image = "mba.mbn", + .proxy_supply = (struct qcom_mss_reg_res[]) { + { + .supply = "pll", + .uA = 100000, + }, + {} + }, + .proxy_clk_names = (char*[]){ + "xo", + "pnoc", + "qdss", + NULL + }, + .active_clk_names = (char*[]){ + "iface", + "bus", + "mem", + "gpll0_mss", + "snoc_axi", + "mnoc_axi", + NULL + }, + .proxy_pd_names = (char*[]){ + "mx", + "cx", + NULL + }, + .need_mem_protection = true, + .has_alt_reset = false, + .has_mba_logs = false, + .has_spare_reg = false, + .has_qaccept_regs = false, + .has_ext_cntl_regs = false, + .has_vq6 = false, + .version = MSS_MSM8996, +}; + +static const struct rproc_hexagon_res msm8916_mss = { + .hexagon_mba_image = "mba.mbn", + .proxy_supply = (struct qcom_mss_reg_res[]) { + { + .supply = "pll", + .uA = 100000, + }, + {} + }, + .fallback_proxy_supply = (struct qcom_mss_reg_res[]) { + { + .supply = "mx", + .uV = 1050000, + }, + { + .supply = "cx", + .uA = 100000, + }, + {} + }, + .proxy_clk_names = (char*[]){ + "xo", + NULL + }, + .active_clk_names = (char*[]){ + "iface", + "bus", + "mem", + NULL + }, + .proxy_pd_names = (char*[]){ + "mx", + "cx", + NULL + }, + .need_mem_protection = false, + .has_alt_reset = false, + .has_mba_logs = false, + .has_spare_reg = false, + .has_qaccept_regs = false, + .has_ext_cntl_regs = false, + .has_vq6 = false, + .version = MSS_MSM8916, +}; + +static const struct rproc_hexagon_res msm8974_mss = { + .hexagon_mba_image = "mba.b00", + .proxy_supply = (struct qcom_mss_reg_res[]) { + { + .supply = "pll", + .uA = 100000, + }, + {} + }, + .fallback_proxy_supply = (struct qcom_mss_reg_res[]) { + { + .supply = "mx", + .uV = 1050000, + }, + { + .supply = "cx", + .uA = 100000, + }, + {} + }, + .active_supply = (struct qcom_mss_reg_res[]) { + { + .supply = "mss", + .uV = 1050000, + .uA = 100000, + }, + {} + }, + .proxy_clk_names = (char*[]){ + "xo", + NULL + }, + .active_clk_names = (char*[]){ + "iface", + "bus", + "mem", + NULL + }, + .proxy_pd_names = (char*[]){ + "mx", + "cx", + NULL + }, + .need_mem_protection = false, + .has_alt_reset = false, + .has_mba_logs = false, + .has_spare_reg = false, + .has_qaccept_regs = false, + .has_ext_cntl_regs = false, + .has_vq6 = false, + .version = MSS_MSM8974, +}; + +static const struct of_device_id q6v5_of_match[] = { + { .compatible = "qcom,q6v5-pil", .data = &msm8916_mss}, + { .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss}, + { .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss}, + { .compatible = "qcom,msm8996-mss-pil", .data = &msm8996_mss}, + { .compatible = "qcom,msm8998-mss-pil", .data = &msm8998_mss}, + { .compatible = "qcom,sc7180-mss-pil", .data = &sc7180_mss}, + { .compatible = "qcom,sc7280-mss-pil", .data = &sc7280_mss}, + { .compatible = "qcom,sdm845-mss-pil", .data = &sdm845_mss}, + { }, +}; +MODULE_DEVICE_TABLE(of, q6v5_of_match); + +static struct platform_driver q6v5_driver = { + .probe = q6v5_probe, + .remove = q6v5_remove, + .driver = { + .name = "qcom-q6v5-mss", + .of_match_table = q6v5_of_match, + }, +}; +module_platform_driver(q6v5_driver); + +MODULE_DESCRIPTION("Qualcomm Self-authenticating modem remoteproc driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3