From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/scsi/aic7xxx/aic7xxx_osm.c | 2577 ++++++++++++++++++++++++++++++++++++ 1 file changed, 2577 insertions(+) create mode 100644 drivers/scsi/aic7xxx/aic7xxx_osm.c (limited to 'drivers/scsi/aic7xxx/aic7xxx_osm.c') diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c new file mode 100644 index 000000000..d3b108265 --- /dev/null +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c @@ -0,0 +1,2577 @@ + +/* + * Adaptec AIC7xxx device driver for Linux. + * + * $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic7xxx_osm.c#235 $ + * + * Copyright (c) 1994 John Aycock + * The University of Calgary Department of Computer Science. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Sources include the Adaptec 1740 driver (aha1740.c), the Ultrastor 24F + * driver (ultrastor.c), various Linux kernel source, the Adaptec EISA + * config file (!adp7771.cfg), the Adaptec AHA-2740A Series User's Guide, + * the Linux Kernel Hacker's Guide, Writing a SCSI Device Driver for Linux, + * the Adaptec 1542 driver (aha1542.c), the Adaptec EISA overlay file + * (adp7770.ovl), the Adaptec AHA-2740 Series Technical Reference Manual, + * the Adaptec AIC-7770 Data Book, the ANSI SCSI specification, the + * ANSI SCSI-2 specification (draft 10c), ... + * + * -------------------------------------------------------------------------- + * + * Modifications by Daniel M. Eischen (deischen@iworks.InterWorks.org): + * + * Substantially modified to include support for wide and twin bus + * adapters, DMAing of SCBs, tagged queueing, IRQ sharing, bug fixes, + * SCB paging, and other rework of the code. + * + * -------------------------------------------------------------------------- + * Copyright (c) 1994-2000 Justin T. Gibbs. + * Copyright (c) 2000-2001 Adaptec Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + * + *--------------------------------------------------------------------------- + * + * Thanks also go to (in alphabetical order) the following: + * + * Rory Bolt - Sequencer bug fixes + * Jay Estabrook - Initial DEC Alpha support + * Doug Ledford - Much needed abort/reset bug fixes + * Kai Makisara - DMAing of SCBs + * + * A Boot time option was also added for not resetting the scsi bus. + * + * Form: aic7xxx=extended + * aic7xxx=no_reset + * aic7xxx=verbose + * + * Daniel M. Eischen, deischen@iworks.InterWorks.org, 1/23/97 + * + * Id: aic7xxx.c,v 4.1 1997/06/12 08:23:42 deang Exp + */ + +/* + * Further driver modifications made by Doug Ledford + * + * Copyright (c) 1997-1999 Doug Ledford + * + * These changes are released under the same licensing terms as the FreeBSD + * driver written by Justin Gibbs. Please see his Copyright notice above + * for the exact terms and conditions covering my changes as well as the + * warranty statement. + * + * Modifications made to the aic7xxx.c,v 4.1 driver from Dan Eischen include + * but are not limited to: + * + * 1: Import of the latest FreeBSD sequencer code for this driver + * 2: Modification of kernel code to accommodate different sequencer semantics + * 3: Extensive changes throughout kernel portion of driver to improve + * abort/reset processing and error hanndling + * 4: Other work contributed by various people on the Internet + * 5: Changes to printk information and verbosity selection code + * 6: General reliability related changes, especially in IRQ management + * 7: Modifications to the default probe/attach order for supported cards + * 8: SMP friendliness has been improved + * + */ + +#include "aic7xxx_osm.h" +#include "aic7xxx_inline.h" +#include + +static struct scsi_transport_template *ahc_linux_transport_template = NULL; + +#include /* __setup */ +#include /* For fetching system memory size */ +#include /* For block_size() */ +#include /* For ssleep/msleep */ +#include + + +/* + * Set this to the delay in seconds after SCSI bus reset. + * Note, we honor this only for the initial bus reset. + * The scsi error recovery code performs its own bus settle + * delay handling for error recovery actions. + */ +#ifdef CONFIG_AIC7XXX_RESET_DELAY_MS +#define AIC7XXX_RESET_DELAY CONFIG_AIC7XXX_RESET_DELAY_MS +#else +#define AIC7XXX_RESET_DELAY 5000 +#endif + +/* + * To change the default number of tagged transactions allowed per-device, + * add a line to the lilo.conf file like: + * append="aic7xxx=verbose,tag_info:{{32,32,32,32},{32,32,32,32}}" + * which will result in the first four devices on the first two + * controllers being set to a tagged queue depth of 32. + * + * The tag_commands is an array of 16 to allow for wide and twin adapters. + * Twin adapters will use indexes 0-7 for channel 0, and indexes 8-15 + * for channel 1. + */ +typedef struct { + uint8_t tag_commands[16]; /* Allow for wide/twin adapters. */ +} adapter_tag_info_t; + +/* + * Modify this as you see fit for your system. + * + * 0 tagged queuing disabled + * 1 <= n <= 253 n == max tags ever dispatched. + * + * The driver will throttle the number of commands dispatched to a + * device if it returns queue full. For devices with a fixed maximum + * queue depth, the driver will eventually determine this depth and + * lock it in (a console message is printed to indicate that a lock + * has occurred). On some devices, queue full is returned for a temporary + * resource shortage. These devices will return queue full at varying + * depths. The driver will throttle back when the queue fulls occur and + * attempt to slowly increase the depth over time as the device recovers + * from the resource shortage. + * + * In this example, the first line will disable tagged queueing for all + * the devices on the first probed aic7xxx adapter. + * + * The second line enables tagged queueing with 4 commands/LUN for IDs + * (0, 2-11, 13-15), disables tagged queueing for ID 12, and tells the + * driver to attempt to use up to 64 tags for ID 1. + * + * The third line is the same as the first line. + * + * The fourth line disables tagged queueing for devices 0 and 3. It + * enables tagged queueing for the other IDs, with 16 commands/LUN + * for IDs 1 and 4, 127 commands/LUN for ID 8, and 4 commands/LUN for + * IDs 2, 5-7, and 9-15. + */ + +/* + * NOTE: The below structure is for reference only, the actual structure + * to modify in order to change things is just below this comment block. +adapter_tag_info_t aic7xxx_tag_info[] = +{ + {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}}, + {{4, 64, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 4, 4, 4}}, + {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}}, + {{0, 16, 4, 0, 16, 4, 4, 4, 127, 4, 4, 4, 4, 4, 4, 4}} +}; +*/ + +#ifdef CONFIG_AIC7XXX_CMDS_PER_DEVICE +#define AIC7XXX_CMDS_PER_DEVICE CONFIG_AIC7XXX_CMDS_PER_DEVICE +#else +#define AIC7XXX_CMDS_PER_DEVICE AHC_MAX_QUEUE +#endif + +#define AIC7XXX_CONFIGED_TAG_COMMANDS { \ + AIC7XXX_CMDS_PER_DEVICE, AIC7XXX_CMDS_PER_DEVICE, \ + AIC7XXX_CMDS_PER_DEVICE, AIC7XXX_CMDS_PER_DEVICE, \ + AIC7XXX_CMDS_PER_DEVICE, AIC7XXX_CMDS_PER_DEVICE, \ + AIC7XXX_CMDS_PER_DEVICE, AIC7XXX_CMDS_PER_DEVICE, \ + AIC7XXX_CMDS_PER_DEVICE, AIC7XXX_CMDS_PER_DEVICE, \ + AIC7XXX_CMDS_PER_DEVICE, AIC7XXX_CMDS_PER_DEVICE, \ + AIC7XXX_CMDS_PER_DEVICE, AIC7XXX_CMDS_PER_DEVICE, \ + AIC7XXX_CMDS_PER_DEVICE, AIC7XXX_CMDS_PER_DEVICE \ +} + +/* + * By default, use the number of commands specified by + * the users kernel configuration. + */ +static adapter_tag_info_t aic7xxx_tag_info[] = +{ + {AIC7XXX_CONFIGED_TAG_COMMANDS}, + {AIC7XXX_CONFIGED_TAG_COMMANDS}, + {AIC7XXX_CONFIGED_TAG_COMMANDS}, + {AIC7XXX_CONFIGED_TAG_COMMANDS}, + {AIC7XXX_CONFIGED_TAG_COMMANDS}, + {AIC7XXX_CONFIGED_TAG_COMMANDS}, + {AIC7XXX_CONFIGED_TAG_COMMANDS}, + {AIC7XXX_CONFIGED_TAG_COMMANDS}, + {AIC7XXX_CONFIGED_TAG_COMMANDS}, + {AIC7XXX_CONFIGED_TAG_COMMANDS}, + {AIC7XXX_CONFIGED_TAG_COMMANDS}, + {AIC7XXX_CONFIGED_TAG_COMMANDS}, + {AIC7XXX_CONFIGED_TAG_COMMANDS}, + {AIC7XXX_CONFIGED_TAG_COMMANDS}, + {AIC7XXX_CONFIGED_TAG_COMMANDS}, + {AIC7XXX_CONFIGED_TAG_COMMANDS} +}; + +/* + * There should be a specific return value for this in scsi.h, but + * it seems that most drivers ignore it. + */ +#define DID_UNDERFLOW DID_ERROR + +void +ahc_print_path(struct ahc_softc *ahc, struct scb *scb) +{ + printk("(scsi%d:%c:%d:%d): ", + ahc->platform_data->host->host_no, + scb != NULL ? SCB_GET_CHANNEL(ahc, scb) : 'X', + scb != NULL ? SCB_GET_TARGET(ahc, scb) : -1, + scb != NULL ? SCB_GET_LUN(scb) : -1); +} + +/* + * XXX - these options apply unilaterally to _all_ 274x/284x/294x + * cards in the system. This should be fixed. Exceptions to this + * rule are noted in the comments. + */ + +/* + * Skip the scsi bus reset. Non 0 make us skip the reset at startup. This + * has no effect on any later resets that might occur due to things like + * SCSI bus timeouts. + */ +static uint32_t aic7xxx_no_reset; + +/* + * Should we force EXTENDED translation on a controller. + * 0 == Use whatever is in the SEEPROM or default to off + * 1 == Use whatever is in the SEEPROM or default to on + */ +static uint32_t aic7xxx_extended; + +/* + * PCI bus parity checking of the Adaptec controllers. This is somewhat + * dubious at best. To my knowledge, this option has never actually + * solved a PCI parity problem, but on certain machines with broken PCI + * chipset configurations where stray PCI transactions with bad parity are + * the norm rather than the exception, the error messages can be overwhelming. + * It's included in the driver for completeness. + * 0 = Shut off PCI parity check + * non-0 = reverse polarity pci parity checking + */ +static uint32_t aic7xxx_pci_parity = ~0; + +/* + * There are lots of broken chipsets in the world. Some of them will + * violate the PCI spec when we issue byte sized memory writes to our + * controller. I/O mapped register access, if allowed by the given + * platform, will work in almost all cases. + */ +uint32_t aic7xxx_allow_memio = ~0; + +/* + * So that we can set how long each device is given as a selection timeout. + * The table of values goes like this: + * 0 - 256ms + * 1 - 128ms + * 2 - 64ms + * 3 - 32ms + * We default to 256ms because some older devices need a longer time + * to respond to initial selection. + */ +static uint32_t aic7xxx_seltime; + +/* + * Certain devices do not perform any aging on commands. Should the + * device be saturated by commands in one portion of the disk, it is + * possible for transactions on far away sectors to never be serviced. + * To handle these devices, we can periodically send an ordered tag to + * force all outstanding transactions to be serviced prior to a new + * transaction. + */ +static uint32_t aic7xxx_periodic_otag; + +/* + * Module information and settable options. + */ +static char *aic7xxx = NULL; + +MODULE_AUTHOR("Maintainer: Hannes Reinecke "); +MODULE_DESCRIPTION("Adaptec AIC77XX/78XX SCSI Host Bus Adapter driver"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_VERSION(AIC7XXX_DRIVER_VERSION); +module_param(aic7xxx, charp, 0444); +MODULE_PARM_DESC(aic7xxx, +"period-delimited options string:\n" +" verbose Enable verbose/diagnostic logging\n" +" allow_memio Allow device registers to be memory mapped\n" +" debug Bitmask of debug values to enable\n" +" no_probe Toggle EISA/VLB controller probing\n" +" probe_eisa_vl Toggle EISA/VLB controller probing\n" +" no_reset Suppress initial bus resets\n" +" extended Enable extended geometry on all controllers\n" +" periodic_otag Send an ordered tagged transaction\n" +" periodically to prevent tag starvation.\n" +" This may be required by some older disk\n" +" drives or RAID arrays.\n" +" tag_info: Set per-target tag depth\n" +" global_tag_depth: Global tag depth for every target\n" +" on every bus\n" +" seltime: Selection Timeout\n" +" (0/256ms,1/128ms,2/64ms,3/32ms)\n" +"\n" +" Sample modprobe configuration file:\n" +" # Toggle EISA/VLB probing\n" +" # Set tag depth on Controller 1/Target 1 to 10 tags\n" +" # Shorten the selection timeout to 128ms\n" +"\n" +" options aic7xxx 'aic7xxx=probe_eisa_vl.tag_info:{{}.{.10}}.seltime:1'\n" +); + +static void ahc_linux_handle_scsi_status(struct ahc_softc *, + struct scsi_device *, + struct scb *); +static void ahc_linux_queue_cmd_complete(struct ahc_softc *ahc, + struct scsi_cmnd *cmd); +static void ahc_linux_freeze_simq(struct ahc_softc *ahc); +static void ahc_linux_release_simq(struct ahc_softc *ahc); +static int ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag); +static void ahc_linux_initialize_scsi_bus(struct ahc_softc *ahc); +static u_int ahc_linux_user_tagdepth(struct ahc_softc *ahc, + struct ahc_devinfo *devinfo); +static void ahc_linux_device_queue_depth(struct scsi_device *); +static int ahc_linux_run_command(struct ahc_softc*, + struct ahc_linux_device *, + struct scsi_cmnd *); +static void ahc_linux_setup_tag_info_global(char *p); +static int aic7xxx_setup(char *s); + +static int ahc_linux_unit; + + +/************************** OS Utility Wrappers *******************************/ +void +ahc_delay(long usec) +{ + /* + * udelay on Linux can have problems for + * multi-millisecond waits. Wait at most + * 1024us per call. + */ + while (usec > 0) { + udelay(usec % 1024); + usec -= 1024; + } +} + +/***************************** Low Level I/O **********************************/ +uint8_t +ahc_inb(struct ahc_softc * ahc, long port) +{ + uint8_t x; + + if (ahc->tag == BUS_SPACE_MEMIO) { + x = readb(ahc->bsh.maddr + port); + } else { + x = inb(ahc->bsh.ioport + port); + } + mb(); + return (x); +} + +void +ahc_outb(struct ahc_softc * ahc, long port, uint8_t val) +{ + if (ahc->tag == BUS_SPACE_MEMIO) { + writeb(val, ahc->bsh.maddr + port); + } else { + outb(val, ahc->bsh.ioport + port); + } + mb(); +} + +void +ahc_outsb(struct ahc_softc * ahc, long port, uint8_t *array, int count) +{ + int i; + + /* + * There is probably a more efficient way to do this on Linux + * but we don't use this for anything speed critical and this + * should work. + */ + for (i = 0; i < count; i++) + ahc_outb(ahc, port, *array++); +} + +void +ahc_insb(struct ahc_softc * ahc, long port, uint8_t *array, int count) +{ + int i; + + /* + * There is probably a more efficient way to do this on Linux + * but we don't use this for anything speed critical and this + * should work. + */ + for (i = 0; i < count; i++) + *array++ = ahc_inb(ahc, port); +} + +/********************************* Inlines ************************************/ +static void ahc_linux_unmap_scb(struct ahc_softc*, struct scb*); + +static int ahc_linux_map_seg(struct ahc_softc *ahc, struct scb *scb, + struct ahc_dma_seg *sg, + dma_addr_t addr, bus_size_t len); + +static void +ahc_linux_unmap_scb(struct ahc_softc *ahc, struct scb *scb) +{ + struct scsi_cmnd *cmd; + + cmd = scb->io_ctx; + ahc_sync_sglist(ahc, scb, BUS_DMASYNC_POSTWRITE); + + scsi_dma_unmap(cmd); +} + +static int +ahc_linux_map_seg(struct ahc_softc *ahc, struct scb *scb, + struct ahc_dma_seg *sg, dma_addr_t addr, bus_size_t len) +{ + int consumed; + + if ((scb->sg_count + 1) > AHC_NSEG) + panic("Too few segs for dma mapping. " + "Increase AHC_NSEG\n"); + + consumed = 1; + sg->addr = ahc_htole32(addr & 0xFFFFFFFF); + scb->platform_data->xfer_len += len; + + if (sizeof(dma_addr_t) > 4 + && (ahc->flags & AHC_39BIT_ADDRESSING) != 0) + len |= (addr >> 8) & AHC_SG_HIGH_ADDR_MASK; + + sg->len = ahc_htole32(len); + return (consumed); +} + +/* + * Return a string describing the driver. + */ +static const char * +ahc_linux_info(struct Scsi_Host *host) +{ + static char buffer[512]; + char ahc_info[256]; + char *bp; + struct ahc_softc *ahc; + + bp = &buffer[0]; + ahc = *(struct ahc_softc **)host->hostdata; + memset(bp, 0, sizeof(buffer)); + strcpy(bp, "Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev " AIC7XXX_DRIVER_VERSION "\n" + " <"); + strcat(bp, ahc->description); + strcat(bp, ">\n" + " "); + ahc_controller_info(ahc, ahc_info); + strcat(bp, ahc_info); + strcat(bp, "\n"); + + return (bp); +} + +/* + * Queue an SCB to the controller. + */ +static int ahc_linux_queue_lck(struct scsi_cmnd *cmd) +{ + struct ahc_softc *ahc; + struct ahc_linux_device *dev = scsi_transport_device_data(cmd->device); + int rtn = SCSI_MLQUEUE_HOST_BUSY; + unsigned long flags; + + ahc = *(struct ahc_softc **)cmd->device->host->hostdata; + + ahc_lock(ahc, &flags); + if (ahc->platform_data->qfrozen == 0) { + cmd->result = CAM_REQ_INPROG << 16; + rtn = ahc_linux_run_command(ahc, dev, cmd); + } + ahc_unlock(ahc, &flags); + + return rtn; +} + +static DEF_SCSI_QCMD(ahc_linux_queue) + +static inline struct scsi_target ** +ahc_linux_target_in_softc(struct scsi_target *starget) +{ + struct ahc_softc *ahc = + *((struct ahc_softc **)dev_to_shost(&starget->dev)->hostdata); + unsigned int target_offset; + + target_offset = starget->id; + if (starget->channel != 0) + target_offset += 8; + + return &ahc->platform_data->starget[target_offset]; +} + +static int +ahc_linux_target_alloc(struct scsi_target *starget) +{ + struct ahc_softc *ahc = + *((struct ahc_softc **)dev_to_shost(&starget->dev)->hostdata); + struct seeprom_config *sc = ahc->seep_config; + unsigned long flags; + struct scsi_target **ahc_targp = ahc_linux_target_in_softc(starget); + unsigned short scsirate; + struct ahc_devinfo devinfo; + char channel = starget->channel + 'A'; + unsigned int our_id = ahc->our_id; + unsigned int target_offset; + + target_offset = starget->id; + if (starget->channel != 0) + target_offset += 8; + + if (starget->channel) + our_id = ahc->our_id_b; + + ahc_lock(ahc, &flags); + + BUG_ON(*ahc_targp != NULL); + + *ahc_targp = starget; + + if (sc) { + int maxsync = AHC_SYNCRATE_DT; + int ultra = 0; + int flags = sc->device_flags[target_offset]; + + if (ahc->flags & AHC_NEWEEPROM_FMT) { + if (flags & CFSYNCHISULTRA) + ultra = 1; + } else if (flags & CFULTRAEN) + ultra = 1; + /* AIC nutcase; 10MHz appears as ultra = 1, CFXFER = 0x04 + * change it to ultra=0, CFXFER = 0 */ + if(ultra && (flags & CFXFER) == 0x04) { + ultra = 0; + flags &= ~CFXFER; + } + + if ((ahc->features & AHC_ULTRA2) != 0) { + scsirate = (flags & CFXFER) | (ultra ? 0x8 : 0); + } else { + scsirate = (flags & CFXFER) << 4; + maxsync = ultra ? AHC_SYNCRATE_ULTRA : + AHC_SYNCRATE_FAST; + } + spi_max_width(starget) = (flags & CFWIDEB) ? 1 : 0; + if (!(flags & CFSYNCH)) + spi_max_offset(starget) = 0; + spi_min_period(starget) = + ahc_find_period(ahc, scsirate, maxsync); + } + ahc_compile_devinfo(&devinfo, our_id, starget->id, + CAM_LUN_WILDCARD, channel, + ROLE_INITIATOR); + ahc_set_syncrate(ahc, &devinfo, NULL, 0, 0, 0, + AHC_TRANS_GOAL, /*paused*/FALSE); + ahc_set_width(ahc, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, + AHC_TRANS_GOAL, /*paused*/FALSE); + ahc_unlock(ahc, &flags); + + return 0; +} + +static void +ahc_linux_target_destroy(struct scsi_target *starget) +{ + struct scsi_target **ahc_targp = ahc_linux_target_in_softc(starget); + + *ahc_targp = NULL; +} + +static int +ahc_linux_slave_alloc(struct scsi_device *sdev) +{ + struct ahc_softc *ahc = + *((struct ahc_softc **)sdev->host->hostdata); + struct scsi_target *starget = sdev->sdev_target; + struct ahc_linux_device *dev; + + if (bootverbose) + printk("%s: Slave Alloc %d\n", ahc_name(ahc), sdev->id); + + dev = scsi_transport_device_data(sdev); + memset(dev, 0, sizeof(*dev)); + + /* + * We start out life using untagged + * transactions of which we allow one. + */ + dev->openings = 1; + + /* + * Set maxtags to 0. This will be changed if we + * later determine that we are dealing with + * a tagged queuing capable device. + */ + dev->maxtags = 0; + + spi_period(starget) = 0; + + return 0; +} + +static int +ahc_linux_slave_configure(struct scsi_device *sdev) +{ + if (bootverbose) + sdev_printk(KERN_INFO, sdev, "Slave Configure\n"); + + ahc_linux_device_queue_depth(sdev); + + /* Initial Domain Validation */ + if (!spi_initial_dv(sdev->sdev_target)) + spi_dv_device(sdev); + + return 0; +} + +#if defined(__i386__) +/* + * Return the disk geometry for the given SCSI device. + */ +static int +ahc_linux_biosparam(struct scsi_device *sdev, struct block_device *bdev, + sector_t capacity, int geom[]) +{ + int heads; + int sectors; + int cylinders; + int extended; + struct ahc_softc *ahc; + u_int channel; + + ahc = *((struct ahc_softc **)sdev->host->hostdata); + channel = sdev_channel(sdev); + + if (scsi_partsize(bdev, capacity, geom)) + return 0; + + heads = 64; + sectors = 32; + cylinders = aic_sector_div(capacity, heads, sectors); + + if (aic7xxx_extended != 0) + extended = 1; + else if (channel == 0) + extended = (ahc->flags & AHC_EXTENDED_TRANS_A) != 0; + else + extended = (ahc->flags & AHC_EXTENDED_TRANS_B) != 0; + if (extended && cylinders >= 1024) { + heads = 255; + sectors = 63; + cylinders = aic_sector_div(capacity, heads, sectors); + } + geom[0] = heads; + geom[1] = sectors; + geom[2] = cylinders; + return (0); +} +#endif + +/* + * Abort the current SCSI command(s). + */ +static int +ahc_linux_abort(struct scsi_cmnd *cmd) +{ + int error; + + error = ahc_linux_queue_recovery_cmd(cmd, SCB_ABORT); + if (error != SUCCESS) + printk("aic7xxx_abort returns 0x%x\n", error); + return (error); +} + +/* + * Attempt to send a target reset message to the device that timed out. + */ +static int +ahc_linux_dev_reset(struct scsi_cmnd *cmd) +{ + int error; + + error = ahc_linux_queue_recovery_cmd(cmd, SCB_DEVICE_RESET); + if (error != SUCCESS) + printk("aic7xxx_dev_reset returns 0x%x\n", error); + return (error); +} + +/* + * Reset the SCSI bus. + */ +static int +ahc_linux_bus_reset(struct scsi_cmnd *cmd) +{ + struct ahc_softc *ahc; + int found; + unsigned long flags; + + ahc = *(struct ahc_softc **)cmd->device->host->hostdata; + + ahc_lock(ahc, &flags); + found = ahc_reset_channel(ahc, scmd_channel(cmd) + 'A', + /*initiate reset*/TRUE); + ahc_unlock(ahc, &flags); + + if (bootverbose) + printk("%s: SCSI bus reset delivered. " + "%d SCBs aborted.\n", ahc_name(ahc), found); + + return SUCCESS; +} + +struct scsi_host_template aic7xxx_driver_template = { + .module = THIS_MODULE, + .name = "aic7xxx", + .proc_name = "aic7xxx", + .show_info = ahc_linux_show_info, + .write_info = ahc_proc_write_seeprom, + .info = ahc_linux_info, + .queuecommand = ahc_linux_queue, + .eh_abort_handler = ahc_linux_abort, + .eh_device_reset_handler = ahc_linux_dev_reset, + .eh_bus_reset_handler = ahc_linux_bus_reset, +#if defined(__i386__) + .bios_param = ahc_linux_biosparam, +#endif + .can_queue = AHC_MAX_QUEUE, + .this_id = -1, + .max_sectors = 8192, + .cmd_per_lun = 2, + .slave_alloc = ahc_linux_slave_alloc, + .slave_configure = ahc_linux_slave_configure, + .target_alloc = ahc_linux_target_alloc, + .target_destroy = ahc_linux_target_destroy, +}; + +/**************************** Tasklet Handler *********************************/ + +/******************************** Macros **************************************/ +#define BUILD_SCSIID(ahc, cmd) \ + ((((cmd)->device->id << TID_SHIFT) & TID) \ + | (((cmd)->device->channel == 0) ? (ahc)->our_id : (ahc)->our_id_b) \ + | (((cmd)->device->channel == 0) ? 0 : TWIN_CHNLB)) + +/******************************** Bus DMA *************************************/ +int +ahc_dma_tag_create(struct ahc_softc *ahc, bus_dma_tag_t parent, + bus_size_t alignment, bus_size_t boundary, + dma_addr_t lowaddr, dma_addr_t highaddr, + bus_dma_filter_t *filter, void *filterarg, + bus_size_t maxsize, int nsegments, + bus_size_t maxsegsz, int flags, bus_dma_tag_t *ret_tag) +{ + bus_dma_tag_t dmat; + + dmat = kmalloc(sizeof(*dmat), GFP_ATOMIC); + if (dmat == NULL) + return (ENOMEM); + + /* + * Linux is very simplistic about DMA memory. For now don't + * maintain all specification information. Once Linux supplies + * better facilities for doing these operations, or the + * needs of this particular driver change, we might need to do + * more here. + */ + dmat->alignment = alignment; + dmat->boundary = boundary; + dmat->maxsize = maxsize; + *ret_tag = dmat; + return (0); +} + +void +ahc_dma_tag_destroy(struct ahc_softc *ahc, bus_dma_tag_t dmat) +{ + kfree(dmat); +} + +int +ahc_dmamem_alloc(struct ahc_softc *ahc, bus_dma_tag_t dmat, void** vaddr, + int flags, bus_dmamap_t *mapp) +{ + /* XXX: check if we really need the GFP_ATOMIC and unwind this mess! */ + *vaddr = dma_alloc_coherent(ahc->dev, dmat->maxsize, mapp, GFP_ATOMIC); + if (*vaddr == NULL) + return ENOMEM; + return 0; +} + +void +ahc_dmamem_free(struct ahc_softc *ahc, bus_dma_tag_t dmat, + void* vaddr, bus_dmamap_t map) +{ + dma_free_coherent(ahc->dev, dmat->maxsize, vaddr, map); +} + +int +ahc_dmamap_load(struct ahc_softc *ahc, bus_dma_tag_t dmat, bus_dmamap_t map, + void *buf, bus_size_t buflen, bus_dmamap_callback_t *cb, + void *cb_arg, int flags) +{ + /* + * Assume for now that this will only be used during + * initialization and not for per-transaction buffer mapping. + */ + bus_dma_segment_t stack_sg; + + stack_sg.ds_addr = map; + stack_sg.ds_len = dmat->maxsize; + cb(cb_arg, &stack_sg, /*nseg*/1, /*error*/0); + return (0); +} + +void +ahc_dmamap_destroy(struct ahc_softc *ahc, bus_dma_tag_t dmat, bus_dmamap_t map) +{ +} + +int +ahc_dmamap_unload(struct ahc_softc *ahc, bus_dma_tag_t dmat, bus_dmamap_t map) +{ + /* Nothing to do */ + return (0); +} + +static void +ahc_linux_setup_tag_info_global(char *p) +{ + int tags, i, j; + + tags = simple_strtoul(p + 1, NULL, 0) & 0xff; + printk("Setting Global Tags= %d\n", tags); + + for (i = 0; i < ARRAY_SIZE(aic7xxx_tag_info); i++) { + for (j = 0; j < AHC_NUM_TARGETS; j++) { + aic7xxx_tag_info[i].tag_commands[j] = tags; + } + } +} + +static void +ahc_linux_setup_tag_info(u_long arg, int instance, int targ, int32_t value) +{ + + if ((instance >= 0) && (targ >= 0) + && (instance < ARRAY_SIZE(aic7xxx_tag_info)) + && (targ < AHC_NUM_TARGETS)) { + aic7xxx_tag_info[instance].tag_commands[targ] = value & 0xff; + if (bootverbose) + printk("tag_info[%d:%d] = %d\n", instance, targ, value); + } +} + +static char * +ahc_parse_brace_option(char *opt_name, char *opt_arg, char *end, int depth, + void (*callback)(u_long, int, int, int32_t), + u_long callback_arg) +{ + char *tok_end; + char *tok_end2; + int i; + int instance; + int targ; + int done; + char tok_list[] = {'.', ',', '{', '}', '\0'}; + + /* All options use a ':' name/arg separator */ + if (*opt_arg != ':') + return (opt_arg); + opt_arg++; + instance = -1; + targ = -1; + done = FALSE; + /* + * Restore separator that may be in + * the middle of our option argument. + */ + tok_end = strchr(opt_arg, '\0'); + if (tok_end < end) + *tok_end = ','; + while (!done) { + switch (*opt_arg) { + case '{': + if (instance == -1) { + instance = 0; + } else { + if (depth > 1) { + if (targ == -1) + targ = 0; + } else { + printk("Malformed Option %s\n", + opt_name); + done = TRUE; + } + } + opt_arg++; + break; + case '}': + if (targ != -1) + targ = -1; + else if (instance != -1) + instance = -1; + opt_arg++; + break; + case ',': + case '.': + if (instance == -1) + done = TRUE; + else if (targ >= 0) + targ++; + else if (instance >= 0) + instance++; + opt_arg++; + break; + case '\0': + done = TRUE; + break; + default: + tok_end = end; + for (i = 0; tok_list[i]; i++) { + tok_end2 = strchr(opt_arg, tok_list[i]); + if ((tok_end2) && (tok_end2 < tok_end)) + tok_end = tok_end2; + } + callback(callback_arg, instance, targ, + simple_strtol(opt_arg, NULL, 0)); + opt_arg = tok_end; + break; + } + } + return (opt_arg); +} + +/* + * Handle Linux boot parameters. This routine allows for assigning a value + * to a parameter with a ':' between the parameter and the value. + * ie. aic7xxx=stpwlev:1,extended + */ +static int +aic7xxx_setup(char *s) +{ + int i, n; + char *p; + char *end; + + static const struct { + const char *name; + uint32_t *flag; + } options[] = { + { "extended", &aic7xxx_extended }, + { "no_reset", &aic7xxx_no_reset }, + { "verbose", &aic7xxx_verbose }, + { "allow_memio", &aic7xxx_allow_memio}, +#ifdef AHC_DEBUG + { "debug", &ahc_debug }, +#endif + { "periodic_otag", &aic7xxx_periodic_otag }, + { "pci_parity", &aic7xxx_pci_parity }, + { "seltime", &aic7xxx_seltime }, + { "tag_info", NULL }, + { "global_tag_depth", NULL }, + { "dv", NULL } + }; + + end = strchr(s, '\0'); + + /* + * XXX ia64 gcc isn't smart enough to know that ARRAY_SIZE + * will never be 0 in this case. + */ + n = 0; + + while ((p = strsep(&s, ",.")) != NULL) { + if (*p == '\0') + continue; + for (i = 0; i < ARRAY_SIZE(options); i++) { + + n = strlen(options[i].name); + if (strncmp(options[i].name, p, n) == 0) + break; + } + if (i == ARRAY_SIZE(options)) + continue; + + if (strncmp(p, "global_tag_depth", n) == 0) { + ahc_linux_setup_tag_info_global(p + n); + } else if (strncmp(p, "tag_info", n) == 0) { + s = ahc_parse_brace_option("tag_info", p + n, end, + 2, ahc_linux_setup_tag_info, 0); + } else if (p[n] == ':') { + *(options[i].flag) = simple_strtoul(p + n + 1, NULL, 0); + } else if (strncmp(p, "verbose", n) == 0) { + *(options[i].flag) = 1; + } else { + *(options[i].flag) ^= 0xFFFFFFFF; + } + } + return 1; +} + +__setup("aic7xxx=", aic7xxx_setup); + +uint32_t aic7xxx_verbose; + +int +ahc_linux_register_host(struct ahc_softc *ahc, struct scsi_host_template *template) +{ + char buf[80]; + struct Scsi_Host *host; + char *new_name; + u_long s; + int retval; + + template->name = ahc->description; + host = scsi_host_alloc(template, sizeof(struct ahc_softc *)); + if (host == NULL) + return (ENOMEM); + + *((struct ahc_softc **)host->hostdata) = ahc; + ahc->platform_data->host = host; + host->can_queue = AHC_MAX_QUEUE; + host->cmd_per_lun = 2; + /* XXX No way to communicate the ID for multiple channels */ + host->this_id = ahc->our_id; + host->irq = ahc->platform_data->irq; + host->max_id = (ahc->features & AHC_WIDE) ? 16 : 8; + host->max_lun = AHC_NUM_LUNS; + host->max_channel = (ahc->features & AHC_TWIN) ? 1 : 0; + host->sg_tablesize = AHC_NSEG; + ahc_lock(ahc, &s); + ahc_set_unit(ahc, ahc_linux_unit++); + ahc_unlock(ahc, &s); + sprintf(buf, "scsi%d", host->host_no); + new_name = kmalloc(strlen(buf) + 1, GFP_ATOMIC); + if (new_name != NULL) { + strcpy(new_name, buf); + ahc_set_name(ahc, new_name); + } + host->unique_id = ahc->unit; + ahc_linux_initialize_scsi_bus(ahc); + ahc_intr_enable(ahc, TRUE); + + host->transportt = ahc_linux_transport_template; + + retval = scsi_add_host(host, ahc->dev); + if (retval) { + printk(KERN_WARNING "aic7xxx: scsi_add_host failed\n"); + scsi_host_put(host); + return retval; + } + + scsi_scan_host(host); + return 0; +} + +/* + * Place the SCSI bus into a known state by either resetting it, + * or forcing transfer negotiations on the next command to any + * target. + */ +static void +ahc_linux_initialize_scsi_bus(struct ahc_softc *ahc) +{ + int i; + int numtarg; + unsigned long s; + + i = 0; + numtarg = 0; + + ahc_lock(ahc, &s); + + if (aic7xxx_no_reset != 0) + ahc->flags &= ~(AHC_RESET_BUS_A|AHC_RESET_BUS_B); + + if ((ahc->flags & AHC_RESET_BUS_A) != 0) + ahc_reset_channel(ahc, 'A', /*initiate_reset*/TRUE); + else + numtarg = (ahc->features & AHC_WIDE) ? 16 : 8; + + if ((ahc->features & AHC_TWIN) != 0) { + + if ((ahc->flags & AHC_RESET_BUS_B) != 0) { + ahc_reset_channel(ahc, 'B', /*initiate_reset*/TRUE); + } else { + if (numtarg == 0) + i = 8; + numtarg += 8; + } + } + + /* + * Force negotiation to async for all targets that + * will not see an initial bus reset. + */ + for (; i < numtarg; i++) { + struct ahc_devinfo devinfo; + struct ahc_initiator_tinfo *tinfo; + struct ahc_tmode_tstate *tstate; + u_int our_id; + u_int target_id; + char channel; + + channel = 'A'; + our_id = ahc->our_id; + target_id = i; + if (i > 7 && (ahc->features & AHC_TWIN) != 0) { + channel = 'B'; + our_id = ahc->our_id_b; + target_id = i % 8; + } + tinfo = ahc_fetch_transinfo(ahc, channel, our_id, + target_id, &tstate); + ahc_compile_devinfo(&devinfo, our_id, target_id, + CAM_LUN_WILDCARD, channel, ROLE_INITIATOR); + ahc_update_neg_request(ahc, &devinfo, tstate, + tinfo, AHC_NEG_ALWAYS); + } + ahc_unlock(ahc, &s); + /* Give the bus some time to recover */ + if ((ahc->flags & (AHC_RESET_BUS_A|AHC_RESET_BUS_B)) != 0) { + ahc_linux_freeze_simq(ahc); + msleep(AIC7XXX_RESET_DELAY); + ahc_linux_release_simq(ahc); + } +} + +int +ahc_platform_alloc(struct ahc_softc *ahc, void *platform_arg) +{ + + ahc->platform_data = + kzalloc(sizeof(struct ahc_platform_data), GFP_ATOMIC); + if (ahc->platform_data == NULL) + return (ENOMEM); + ahc->platform_data->irq = AHC_LINUX_NOIRQ; + ahc_lockinit(ahc); + ahc->seltime = (aic7xxx_seltime & 0x3) << 4; + ahc->seltime_b = (aic7xxx_seltime & 0x3) << 4; + if (aic7xxx_pci_parity == 0) + ahc->flags |= AHC_DISABLE_PCI_PERR; + + return (0); +} + +void +ahc_platform_free(struct ahc_softc *ahc) +{ + struct scsi_target *starget; + int i; + + if (ahc->platform_data != NULL) { + /* destroy all of the device and target objects */ + for (i = 0; i < AHC_NUM_TARGETS; i++) { + starget = ahc->platform_data->starget[i]; + if (starget != NULL) { + ahc->platform_data->starget[i] = NULL; + } + } + + if (ahc->platform_data->irq != AHC_LINUX_NOIRQ) + free_irq(ahc->platform_data->irq, ahc); + if (ahc->tag == BUS_SPACE_PIO + && ahc->bsh.ioport != 0) + release_region(ahc->bsh.ioport, 256); + if (ahc->tag == BUS_SPACE_MEMIO + && ahc->bsh.maddr != NULL) { + iounmap(ahc->bsh.maddr); + release_mem_region(ahc->platform_data->mem_busaddr, + 0x1000); + } + + if (ahc->platform_data->host) + scsi_host_put(ahc->platform_data->host); + + kfree(ahc->platform_data); + } +} + +void +ahc_platform_freeze_devq(struct ahc_softc *ahc, struct scb *scb) +{ + ahc_platform_abort_scbs(ahc, SCB_GET_TARGET(ahc, scb), + SCB_GET_CHANNEL(ahc, scb), + SCB_GET_LUN(scb), SCB_LIST_NULL, + ROLE_UNKNOWN, CAM_REQUEUE_REQ); +} + +void +ahc_platform_set_tags(struct ahc_softc *ahc, struct scsi_device *sdev, + struct ahc_devinfo *devinfo, ahc_queue_alg alg) +{ + struct ahc_linux_device *dev; + int was_queuing; + int now_queuing; + + if (sdev == NULL) + return; + dev = scsi_transport_device_data(sdev); + + was_queuing = dev->flags & (AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED); + switch (alg) { + default: + case AHC_QUEUE_NONE: + now_queuing = 0; + break; + case AHC_QUEUE_BASIC: + now_queuing = AHC_DEV_Q_BASIC; + break; + case AHC_QUEUE_TAGGED: + now_queuing = AHC_DEV_Q_TAGGED; + break; + } + if ((dev->flags & AHC_DEV_FREEZE_TIL_EMPTY) == 0 + && (was_queuing != now_queuing) + && (dev->active != 0)) { + dev->flags |= AHC_DEV_FREEZE_TIL_EMPTY; + dev->qfrozen++; + } + + dev->flags &= ~(AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED|AHC_DEV_PERIODIC_OTAG); + if (now_queuing) { + u_int usertags; + + usertags = ahc_linux_user_tagdepth(ahc, devinfo); + if (!was_queuing) { + /* + * Start out aggressively and allow our + * dynamic queue depth algorithm to take + * care of the rest. + */ + dev->maxtags = usertags; + dev->openings = dev->maxtags - dev->active; + } + if (dev->maxtags == 0) { + /* + * Queueing is disabled by the user. + */ + dev->openings = 1; + } else if (alg == AHC_QUEUE_TAGGED) { + dev->flags |= AHC_DEV_Q_TAGGED; + if (aic7xxx_periodic_otag != 0) + dev->flags |= AHC_DEV_PERIODIC_OTAG; + } else + dev->flags |= AHC_DEV_Q_BASIC; + } else { + /* We can only have one opening. */ + dev->maxtags = 0; + dev->openings = 1 - dev->active; + } + switch ((dev->flags & (AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED))) { + case AHC_DEV_Q_BASIC: + case AHC_DEV_Q_TAGGED: + scsi_change_queue_depth(sdev, + dev->openings + dev->active); + break; + default: + /* + * We allow the OS to queue 2 untagged transactions to + * us at any time even though we can only execute them + * serially on the controller/device. This should + * remove some latency. + */ + scsi_change_queue_depth(sdev, 2); + break; + } +} + +int +ahc_platform_abort_scbs(struct ahc_softc *ahc, int target, char channel, + int lun, u_int tag, role_t role, uint32_t status) +{ + return 0; +} + +static u_int +ahc_linux_user_tagdepth(struct ahc_softc *ahc, struct ahc_devinfo *devinfo) +{ + static int warned_user; + u_int tags; + + tags = 0; + if ((ahc->user_discenable & devinfo->target_mask) != 0) { + if (ahc->unit >= ARRAY_SIZE(aic7xxx_tag_info)) { + if (warned_user == 0) { + + printk(KERN_WARNING +"aic7xxx: WARNING: Insufficient tag_info instances\n" +"aic7xxx: for installed controllers. Using defaults\n" +"aic7xxx: Please update the aic7xxx_tag_info array in\n" +"aic7xxx: the aic7xxx_osm..c source file.\n"); + warned_user++; + } + tags = AHC_MAX_QUEUE; + } else { + adapter_tag_info_t *tag_info; + + tag_info = &aic7xxx_tag_info[ahc->unit]; + tags = tag_info->tag_commands[devinfo->target_offset]; + if (tags > AHC_MAX_QUEUE) + tags = AHC_MAX_QUEUE; + } + } + return (tags); +} + +/* + * Determines the queue depth for a given device. + */ +static void +ahc_linux_device_queue_depth(struct scsi_device *sdev) +{ + struct ahc_devinfo devinfo; + u_int tags; + struct ahc_softc *ahc = *((struct ahc_softc **)sdev->host->hostdata); + + ahc_compile_devinfo(&devinfo, + sdev->sdev_target->channel == 0 + ? ahc->our_id : ahc->our_id_b, + sdev->sdev_target->id, sdev->lun, + sdev->sdev_target->channel == 0 ? 'A' : 'B', + ROLE_INITIATOR); + tags = ahc_linux_user_tagdepth(ahc, &devinfo); + if (tags != 0 && sdev->tagged_supported != 0) { + + ahc_platform_set_tags(ahc, sdev, &devinfo, AHC_QUEUE_TAGGED); + ahc_send_async(ahc, devinfo.channel, devinfo.target, + devinfo.lun, AC_TRANSFER_NEG); + ahc_print_devinfo(ahc, &devinfo); + printk("Tagged Queuing enabled. Depth %d\n", tags); + } else { + ahc_platform_set_tags(ahc, sdev, &devinfo, AHC_QUEUE_NONE); + ahc_send_async(ahc, devinfo.channel, devinfo.target, + devinfo.lun, AC_TRANSFER_NEG); + } +} + +static int +ahc_linux_run_command(struct ahc_softc *ahc, struct ahc_linux_device *dev, + struct scsi_cmnd *cmd) +{ + struct scb *scb; + struct hardware_scb *hscb; + struct ahc_initiator_tinfo *tinfo; + struct ahc_tmode_tstate *tstate; + uint16_t mask; + struct scb_tailq *untagged_q = NULL; + int nseg; + + /* + * Schedule us to run later. The only reason we are not + * running is because the whole controller Q is frozen. + */ + if (ahc->platform_data->qfrozen != 0) + return SCSI_MLQUEUE_HOST_BUSY; + + /* + * We only allow one untagged transaction + * per target in the initiator role unless + * we are storing a full busy target *lun* + * table in SCB space. + */ + if (!(cmd->flags & SCMD_TAGGED) + && (ahc->features & AHC_SCB_BTT) == 0) { + int target_offset; + + target_offset = cmd->device->id + cmd->device->channel * 8; + untagged_q = &(ahc->untagged_queues[target_offset]); + if (!TAILQ_EMPTY(untagged_q)) + /* if we're already executing an untagged command + * we're busy to another */ + return SCSI_MLQUEUE_DEVICE_BUSY; + } + + nseg = scsi_dma_map(cmd); + if (nseg < 0) + return SCSI_MLQUEUE_HOST_BUSY; + + /* + * Get an scb to use. + */ + scb = ahc_get_scb(ahc); + if (!scb) { + scsi_dma_unmap(cmd); + return SCSI_MLQUEUE_HOST_BUSY; + } + + scb->io_ctx = cmd; + scb->platform_data->dev = dev; + hscb = scb->hscb; + cmd->host_scribble = (char *)scb; + + /* + * Fill out basics of the HSCB. + */ + hscb->control = 0; + hscb->scsiid = BUILD_SCSIID(ahc, cmd); + hscb->lun = cmd->device->lun; + mask = SCB_GET_TARGET_MASK(ahc, scb); + tinfo = ahc_fetch_transinfo(ahc, SCB_GET_CHANNEL(ahc, scb), + SCB_GET_OUR_ID(scb), + SCB_GET_TARGET(ahc, scb), &tstate); + hscb->scsirate = tinfo->scsirate; + hscb->scsioffset = tinfo->curr.offset; + if ((tstate->ultraenb & mask) != 0) + hscb->control |= ULTRAENB; + + if ((ahc->user_discenable & mask) != 0) + hscb->control |= DISCENB; + + if ((tstate->auto_negotiate & mask) != 0) { + scb->flags |= SCB_AUTO_NEGOTIATE; + scb->hscb->control |= MK_MESSAGE; + } + + if ((dev->flags & (AHC_DEV_Q_TAGGED|AHC_DEV_Q_BASIC)) != 0) { + if (dev->commands_since_idle_or_otag == AHC_OTAG_THRESH + && (dev->flags & AHC_DEV_Q_TAGGED) != 0) { + hscb->control |= ORDERED_QUEUE_TAG; + dev->commands_since_idle_or_otag = 0; + } else { + hscb->control |= SIMPLE_QUEUE_TAG; + } + } + + hscb->cdb_len = cmd->cmd_len; + if (hscb->cdb_len <= 12) { + memcpy(hscb->shared_data.cdb, cmd->cmnd, hscb->cdb_len); + } else { + memcpy(hscb->cdb32, cmd->cmnd, hscb->cdb_len); + scb->flags |= SCB_CDB32_PTR; + } + + scb->platform_data->xfer_len = 0; + ahc_set_residual(scb, 0); + ahc_set_sense_residual(scb, 0); + scb->sg_count = 0; + + if (nseg > 0) { + struct ahc_dma_seg *sg; + struct scatterlist *cur_seg; + int i; + + /* Copy the segments into the SG list. */ + sg = scb->sg_list; + /* + * The sg_count may be larger than nseg if + * a transfer crosses a 32bit page. + */ + scsi_for_each_sg(cmd, cur_seg, nseg, i) { + dma_addr_t addr; + bus_size_t len; + int consumed; + + addr = sg_dma_address(cur_seg); + len = sg_dma_len(cur_seg); + consumed = ahc_linux_map_seg(ahc, scb, + sg, addr, len); + sg += consumed; + scb->sg_count += consumed; + } + sg--; + sg->len |= ahc_htole32(AHC_DMA_LAST_SEG); + + /* + * Reset the sg list pointer. + */ + scb->hscb->sgptr = + ahc_htole32(scb->sg_list_phys | SG_FULL_RESID); + + /* + * Copy the first SG into the "current" + * data pointer area. + */ + scb->hscb->dataptr = scb->sg_list->addr; + scb->hscb->datacnt = scb->sg_list->len; + } else { + scb->hscb->sgptr = ahc_htole32(SG_LIST_NULL); + scb->hscb->dataptr = 0; + scb->hscb->datacnt = 0; + scb->sg_count = 0; + } + + LIST_INSERT_HEAD(&ahc->pending_scbs, scb, pending_links); + dev->openings--; + dev->active++; + dev->commands_issued++; + if ((dev->flags & AHC_DEV_PERIODIC_OTAG) != 0) + dev->commands_since_idle_or_otag++; + + scb->flags |= SCB_ACTIVE; + if (untagged_q) { + TAILQ_INSERT_TAIL(untagged_q, scb, links.tqe); + scb->flags |= SCB_UNTAGGEDQ; + } + ahc_queue_scb(ahc, scb); + return 0; +} + +/* + * SCSI controller interrupt handler. + */ +irqreturn_t +ahc_linux_isr(int irq, void *dev_id) +{ + struct ahc_softc *ahc; + u_long flags; + int ours; + + ahc = (struct ahc_softc *) dev_id; + ahc_lock(ahc, &flags); + ours = ahc_intr(ahc); + ahc_unlock(ahc, &flags); + return IRQ_RETVAL(ours); +} + +void +ahc_platform_flushwork(struct ahc_softc *ahc) +{ + +} + +void +ahc_send_async(struct ahc_softc *ahc, char channel, + u_int target, u_int lun, ac_code code) +{ + switch (code) { + case AC_TRANSFER_NEG: + { + struct scsi_target *starget; + struct ahc_initiator_tinfo *tinfo; + struct ahc_tmode_tstate *tstate; + int target_offset; + unsigned int target_ppr_options; + + BUG_ON(target == CAM_TARGET_WILDCARD); + + tinfo = ahc_fetch_transinfo(ahc, channel, + channel == 'A' ? ahc->our_id + : ahc->our_id_b, + target, &tstate); + + /* + * Don't bother reporting results while + * negotiations are still pending. + */ + if (tinfo->curr.period != tinfo->goal.period + || tinfo->curr.width != tinfo->goal.width + || tinfo->curr.offset != tinfo->goal.offset + || tinfo->curr.ppr_options != tinfo->goal.ppr_options) + if (bootverbose == 0) + break; + + /* + * Don't bother reporting results that + * are identical to those last reported. + */ + target_offset = target; + if (channel == 'B') + target_offset += 8; + starget = ahc->platform_data->starget[target_offset]; + if (starget == NULL) + break; + + target_ppr_options = + (spi_dt(starget) ? MSG_EXT_PPR_DT_REQ : 0) + + (spi_qas(starget) ? MSG_EXT_PPR_QAS_REQ : 0) + + (spi_iu(starget) ? MSG_EXT_PPR_IU_REQ : 0); + + if (tinfo->curr.period == spi_period(starget) + && tinfo->curr.width == spi_width(starget) + && tinfo->curr.offset == spi_offset(starget) + && tinfo->curr.ppr_options == target_ppr_options) + if (bootverbose == 0) + break; + + spi_period(starget) = tinfo->curr.period; + spi_width(starget) = tinfo->curr.width; + spi_offset(starget) = tinfo->curr.offset; + spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ ? 1 : 0; + spi_qas(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_QAS_REQ ? 1 : 0; + spi_iu(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ ? 1 : 0; + spi_display_xfer_agreement(starget); + break; + } + case AC_SENT_BDR: + { + WARN_ON(lun != CAM_LUN_WILDCARD); + scsi_report_device_reset(ahc->platform_data->host, + channel - 'A', target); + break; + } + case AC_BUS_RESET: + if (ahc->platform_data->host != NULL) { + scsi_report_bus_reset(ahc->platform_data->host, + channel - 'A'); + } + break; + default: + panic("ahc_send_async: Unexpected async event"); + } +} + +/* + * Calls the higher level scsi done function and frees the scb. + */ +void +ahc_done(struct ahc_softc *ahc, struct scb *scb) +{ + struct scsi_cmnd *cmd; + struct ahc_linux_device *dev; + + LIST_REMOVE(scb, pending_links); + if ((scb->flags & SCB_UNTAGGEDQ) != 0) { + struct scb_tailq *untagged_q; + int target_offset; + + target_offset = SCB_GET_TARGET_OFFSET(ahc, scb); + untagged_q = &(ahc->untagged_queues[target_offset]); + TAILQ_REMOVE(untagged_q, scb, links.tqe); + BUG_ON(!TAILQ_EMPTY(untagged_q)); + } else if ((scb->flags & SCB_ACTIVE) == 0) { + /* + * Transactions aborted from the untagged queue may + * not have been dispatched to the controller, so + * only check the SCB_ACTIVE flag for tagged transactions. + */ + printk("SCB %d done'd twice\n", scb->hscb->tag); + ahc_dump_card_state(ahc); + panic("Stopping for safety"); + } + cmd = scb->io_ctx; + dev = scb->platform_data->dev; + dev->active--; + dev->openings++; + if ((cmd->result & (CAM_DEV_QFRZN << 16)) != 0) { + cmd->result &= ~(CAM_DEV_QFRZN << 16); + dev->qfrozen--; + } + ahc_linux_unmap_scb(ahc, scb); + + /* + * Guard against stale sense data. + * The Linux mid-layer assumes that sense + * was retrieved anytime the first byte of + * the sense buffer looks "sane". + */ + cmd->sense_buffer[0] = 0; + if (ahc_get_transaction_status(scb) == CAM_REQ_INPROG) { +#ifdef AHC_REPORT_UNDERFLOWS + uint32_t amount_xferred; + + amount_xferred = + ahc_get_transfer_length(scb) - ahc_get_residual(scb); +#endif + if ((scb->flags & SCB_TRANSMISSION_ERROR) != 0) { +#ifdef AHC_DEBUG + if ((ahc_debug & AHC_SHOW_MISC) != 0) { + ahc_print_path(ahc, scb); + printk("Set CAM_UNCOR_PARITY\n"); + } +#endif + ahc_set_transaction_status(scb, CAM_UNCOR_PARITY); +#ifdef AHC_REPORT_UNDERFLOWS + /* + * This code is disabled by default as some + * clients of the SCSI system do not properly + * initialize the underflow parameter. This + * results in spurious termination of commands + * that complete as expected (e.g. underflow is + * allowed as command can return variable amounts + * of data. + */ + } else if (amount_xferred < scb->io_ctx->underflow) { + u_int i; + + ahc_print_path(ahc, scb); + printk("CDB:"); + for (i = 0; i < scb->io_ctx->cmd_len; i++) + printk(" 0x%x", scb->io_ctx->cmnd[i]); + printk("\n"); + ahc_print_path(ahc, scb); + printk("Saw underflow (%ld of %ld bytes). " + "Treated as error\n", + ahc_get_residual(scb), + ahc_get_transfer_length(scb)); + ahc_set_transaction_status(scb, CAM_DATA_RUN_ERR); +#endif + } else { + ahc_set_transaction_status(scb, CAM_REQ_CMP); + } + } else if (ahc_get_transaction_status(scb) == CAM_SCSI_STATUS_ERROR) { + ahc_linux_handle_scsi_status(ahc, cmd->device, scb); + } + + if (dev->openings == 1 + && ahc_get_transaction_status(scb) == CAM_REQ_CMP + && ahc_get_scsi_status(scb) != SAM_STAT_TASK_SET_FULL) + dev->tag_success_count++; + /* + * Some devices deal with temporary internal resource + * shortages by returning queue full. When the queue + * full occurrs, we throttle back. Slowly try to get + * back to our previous queue depth. + */ + if ((dev->openings + dev->active) < dev->maxtags + && dev->tag_success_count > AHC_TAG_SUCCESS_INTERVAL) { + dev->tag_success_count = 0; + dev->openings++; + } + + if (dev->active == 0) + dev->commands_since_idle_or_otag = 0; + + if ((scb->flags & SCB_RECOVERY_SCB) != 0) { + printk("Recovery SCB completes\n"); + if (ahc_get_transaction_status(scb) == CAM_BDR_SENT + || ahc_get_transaction_status(scb) == CAM_REQ_ABORTED) + ahc_set_transaction_status(scb, CAM_CMD_TIMEOUT); + + if (ahc->platform_data->eh_done) + complete(ahc->platform_data->eh_done); + } + + ahc_free_scb(ahc, scb); + ahc_linux_queue_cmd_complete(ahc, cmd); +} + +static void +ahc_linux_handle_scsi_status(struct ahc_softc *ahc, + struct scsi_device *sdev, struct scb *scb) +{ + struct ahc_devinfo devinfo; + struct ahc_linux_device *dev = scsi_transport_device_data(sdev); + + ahc_compile_devinfo(&devinfo, + ahc->our_id, + sdev->sdev_target->id, sdev->lun, + sdev->sdev_target->channel == 0 ? 'A' : 'B', + ROLE_INITIATOR); + + /* + * We don't currently trust the mid-layer to + * properly deal with queue full or busy. So, + * when one occurs, we tell the mid-layer to + * unconditionally requeue the command to us + * so that we can retry it ourselves. We also + * implement our own throttling mechanism so + * we don't clobber the device with too many + * commands. + */ + switch (ahc_get_scsi_status(scb)) { + default: + break; + case SAM_STAT_CHECK_CONDITION: + case SAM_STAT_COMMAND_TERMINATED: + { + struct scsi_cmnd *cmd; + + /* + * Copy sense information to the OS's cmd + * structure if it is available. + */ + cmd = scb->io_ctx; + if (scb->flags & SCB_SENSE) { + u_int sense_size; + + sense_size = min(sizeof(struct scsi_sense_data) + - ahc_get_sense_residual(scb), + (u_long)SCSI_SENSE_BUFFERSIZE); + memcpy(cmd->sense_buffer, + ahc_get_sense_buf(ahc, scb), sense_size); + if (sense_size < SCSI_SENSE_BUFFERSIZE) + memset(&cmd->sense_buffer[sense_size], 0, + SCSI_SENSE_BUFFERSIZE - sense_size); +#ifdef AHC_DEBUG + if (ahc_debug & AHC_SHOW_SENSE) { + int i; + + printk("Copied %d bytes of sense data:", + sense_size); + for (i = 0; i < sense_size; i++) { + if ((i & 0xF) == 0) + printk("\n"); + printk("0x%x ", cmd->sense_buffer[i]); + } + printk("\n"); + } +#endif + } + break; + } + case SAM_STAT_TASK_SET_FULL: + { + /* + * By the time the core driver has returned this + * command, all other commands that were queued + * to us but not the device have been returned. + * This ensures that dev->active is equal to + * the number of commands actually queued to + * the device. + */ + dev->tag_success_count = 0; + if (dev->active != 0) { + /* + * Drop our opening count to the number + * of commands currently outstanding. + */ + dev->openings = 0; +/* + ahc_print_path(ahc, scb); + printk("Dropping tag count to %d\n", dev->active); + */ + if (dev->active == dev->tags_on_last_queuefull) { + + dev->last_queuefull_same_count++; + /* + * If we repeatedly see a queue full + * at the same queue depth, this + * device has a fixed number of tag + * slots. Lock in this tag depth + * so we stop seeing queue fulls from + * this device. + */ + if (dev->last_queuefull_same_count + == AHC_LOCK_TAGS_COUNT) { + dev->maxtags = dev->active; + ahc_print_path(ahc, scb); + printk("Locking max tag count at %d\n", + dev->active); + } + } else { + dev->tags_on_last_queuefull = dev->active; + dev->last_queuefull_same_count = 0; + } + ahc_set_transaction_status(scb, CAM_REQUEUE_REQ); + ahc_set_scsi_status(scb, SAM_STAT_GOOD); + ahc_platform_set_tags(ahc, sdev, &devinfo, + (dev->flags & AHC_DEV_Q_BASIC) + ? AHC_QUEUE_BASIC : AHC_QUEUE_TAGGED); + break; + } + /* + * Drop down to a single opening, and treat this + * as if the target returned BUSY SCSI status. + */ + dev->openings = 1; + ahc_set_scsi_status(scb, SAM_STAT_BUSY); + ahc_platform_set_tags(ahc, sdev, &devinfo, + (dev->flags & AHC_DEV_Q_BASIC) + ? AHC_QUEUE_BASIC : AHC_QUEUE_TAGGED); + break; + } + } +} + +static void +ahc_linux_queue_cmd_complete(struct ahc_softc *ahc, struct scsi_cmnd *cmd) +{ + /* + * Map CAM error codes into Linux Error codes. We + * avoid the conversion so that the DV code has the + * full error information available when making + * state change decisions. + */ + { + u_int new_status; + + switch (ahc_cmd_get_transaction_status(cmd)) { + case CAM_REQ_INPROG: + case CAM_REQ_CMP: + case CAM_SCSI_STATUS_ERROR: + new_status = DID_OK; + break; + case CAM_REQ_ABORTED: + new_status = DID_ABORT; + break; + case CAM_BUSY: + new_status = DID_BUS_BUSY; + break; + case CAM_REQ_INVALID: + case CAM_PATH_INVALID: + new_status = DID_BAD_TARGET; + break; + case CAM_SEL_TIMEOUT: + new_status = DID_NO_CONNECT; + break; + case CAM_SCSI_BUS_RESET: + case CAM_BDR_SENT: + new_status = DID_RESET; + break; + case CAM_UNCOR_PARITY: + new_status = DID_PARITY; + break; + case CAM_CMD_TIMEOUT: + new_status = DID_TIME_OUT; + break; + case CAM_UA_ABORT: + case CAM_REQ_CMP_ERR: + case CAM_AUTOSENSE_FAIL: + case CAM_NO_HBA: + case CAM_DATA_RUN_ERR: + case CAM_UNEXP_BUSFREE: + case CAM_SEQUENCE_FAIL: + case CAM_CCB_LEN_ERR: + case CAM_PROVIDE_FAIL: + case CAM_REQ_TERMIO: + case CAM_UNREC_HBA_ERROR: + case CAM_REQ_TOO_BIG: + new_status = DID_ERROR; + break; + case CAM_REQUEUE_REQ: + new_status = DID_REQUEUE; + break; + default: + /* We should never get here */ + new_status = DID_ERROR; + break; + } + + ahc_cmd_set_transaction_status(cmd, new_status); + } + + scsi_done(cmd); +} + +static void +ahc_linux_freeze_simq(struct ahc_softc *ahc) +{ + unsigned long s; + + ahc_lock(ahc, &s); + ahc->platform_data->qfrozen++; + if (ahc->platform_data->qfrozen == 1) { + scsi_block_requests(ahc->platform_data->host); + + /* XXX What about Twin channels? */ + ahc_platform_abort_scbs(ahc, CAM_TARGET_WILDCARD, ALL_CHANNELS, + CAM_LUN_WILDCARD, SCB_LIST_NULL, + ROLE_INITIATOR, CAM_REQUEUE_REQ); + } + ahc_unlock(ahc, &s); +} + +static void +ahc_linux_release_simq(struct ahc_softc *ahc) +{ + u_long s; + int unblock_reqs; + + unblock_reqs = 0; + ahc_lock(ahc, &s); + if (ahc->platform_data->qfrozen > 0) + ahc->platform_data->qfrozen--; + if (ahc->platform_data->qfrozen == 0) + unblock_reqs = 1; + ahc_unlock(ahc, &s); + /* + * There is still a race here. The mid-layer + * should keep its own freeze count and use + * a bottom half handler to run the queues + * so we can unblock with our own lock held. + */ + if (unblock_reqs) + scsi_unblock_requests(ahc->platform_data->host); +} + +static int +ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag) +{ + struct ahc_softc *ahc; + struct ahc_linux_device *dev; + struct scb *pending_scb; + u_int saved_scbptr; + u_int active_scb_index; + u_int last_phase; + u_int saved_scsiid; + u_int cdb_byte; + int retval; + int was_paused; + int paused; + int wait; + int disconnected; + unsigned long flags; + + pending_scb = NULL; + paused = FALSE; + wait = FALSE; + ahc = *(struct ahc_softc **)cmd->device->host->hostdata; + + scmd_printk(KERN_INFO, cmd, "Attempting to queue a%s message\n", + flag == SCB_ABORT ? "n ABORT" : " TARGET RESET"); + + printk("CDB:"); + for (cdb_byte = 0; cdb_byte < cmd->cmd_len; cdb_byte++) + printk(" 0x%x", cmd->cmnd[cdb_byte]); + printk("\n"); + + ahc_lock(ahc, &flags); + + /* + * First determine if we currently own this command. + * Start by searching the device queue. If not found + * there, check the pending_scb list. If not found + * at all, and the system wanted us to just abort the + * command, return success. + */ + dev = scsi_transport_device_data(cmd->device); + + if (dev == NULL) { + /* + * No target device for this command exists, + * so we must not still own the command. + */ + printk("%s:%d:%d:%d: Is not an active device\n", + ahc_name(ahc), cmd->device->channel, cmd->device->id, + (u8)cmd->device->lun); + retval = SUCCESS; + goto no_cmd; + } + + if ((dev->flags & (AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED)) == 0 + && ahc_search_untagged_queues(ahc, cmd, cmd->device->id, + cmd->device->channel + 'A', + (u8)cmd->device->lun, + CAM_REQ_ABORTED, SEARCH_COMPLETE) != 0) { + printk("%s:%d:%d:%d: Command found on untagged queue\n", + ahc_name(ahc), cmd->device->channel, cmd->device->id, + (u8)cmd->device->lun); + retval = SUCCESS; + goto done; + } + + /* + * See if we can find a matching cmd in the pending list. + */ + LIST_FOREACH(pending_scb, &ahc->pending_scbs, pending_links) { + if (pending_scb->io_ctx == cmd) + break; + } + + if (pending_scb == NULL && flag == SCB_DEVICE_RESET) { + + /* Any SCB for this device will do for a target reset */ + LIST_FOREACH(pending_scb, &ahc->pending_scbs, pending_links) { + if (ahc_match_scb(ahc, pending_scb, scmd_id(cmd), + scmd_channel(cmd) + 'A', + CAM_LUN_WILDCARD, + SCB_LIST_NULL, ROLE_INITIATOR)) + break; + } + } + + if (pending_scb == NULL) { + scmd_printk(KERN_INFO, cmd, "Command not found\n"); + goto no_cmd; + } + + if ((pending_scb->flags & SCB_RECOVERY_SCB) != 0) { + /* + * We can't queue two recovery actions using the same SCB + */ + retval = FAILED; + goto done; + } + + /* + * Ensure that the card doesn't do anything + * behind our back and that we didn't "just" miss + * an interrupt that would affect this cmd. + */ + was_paused = ahc_is_paused(ahc); + ahc_pause_and_flushwork(ahc); + paused = TRUE; + + if ((pending_scb->flags & SCB_ACTIVE) == 0) { + scmd_printk(KERN_INFO, cmd, "Command already completed\n"); + goto no_cmd; + } + + printk("%s: At time of recovery, card was %spaused\n", + ahc_name(ahc), was_paused ? "" : "not "); + ahc_dump_card_state(ahc); + + disconnected = TRUE; + if (flag == SCB_ABORT) { + if (ahc_search_qinfifo(ahc, cmd->device->id, + cmd->device->channel + 'A', + cmd->device->lun, + pending_scb->hscb->tag, + ROLE_INITIATOR, CAM_REQ_ABORTED, + SEARCH_COMPLETE) > 0) { + printk("%s:%d:%d:%d: Cmd aborted from QINFIFO\n", + ahc_name(ahc), cmd->device->channel, + cmd->device->id, (u8)cmd->device->lun); + retval = SUCCESS; + goto done; + } + } else if (ahc_search_qinfifo(ahc, cmd->device->id, + cmd->device->channel + 'A', + cmd->device->lun, + pending_scb->hscb->tag, + ROLE_INITIATOR, /*status*/0, + SEARCH_COUNT) > 0) { + disconnected = FALSE; + } + + if (disconnected && (ahc_inb(ahc, SEQ_FLAGS) & NOT_IDENTIFIED) == 0) { + struct scb *bus_scb; + + bus_scb = ahc_lookup_scb(ahc, ahc_inb(ahc, SCB_TAG)); + if (bus_scb == pending_scb) + disconnected = FALSE; + else if (flag != SCB_ABORT + && ahc_inb(ahc, SAVED_SCSIID) == pending_scb->hscb->scsiid + && ahc_inb(ahc, SAVED_LUN) == SCB_GET_LUN(pending_scb)) + disconnected = FALSE; + } + + /* + * At this point, pending_scb is the scb associated with the + * passed in command. That command is currently active on the + * bus, is in the disconnected state, or we're hoping to find + * a command for the same target active on the bus to abuse to + * send a BDR. Queue the appropriate message based on which of + * these states we are in. + */ + last_phase = ahc_inb(ahc, LASTPHASE); + saved_scbptr = ahc_inb(ahc, SCBPTR); + active_scb_index = ahc_inb(ahc, SCB_TAG); + saved_scsiid = ahc_inb(ahc, SAVED_SCSIID); + if (last_phase != P_BUSFREE + && (pending_scb->hscb->tag == active_scb_index + || (flag == SCB_DEVICE_RESET + && SCSIID_TARGET(ahc, saved_scsiid) == scmd_id(cmd)))) { + + /* + * We're active on the bus, so assert ATN + * and hope that the target responds. + */ + pending_scb = ahc_lookup_scb(ahc, active_scb_index); + pending_scb->flags |= SCB_RECOVERY_SCB|flag; + ahc_outb(ahc, MSG_OUT, HOST_MSG); + ahc_outb(ahc, SCSISIGO, last_phase|ATNO); + scmd_printk(KERN_INFO, cmd, "Device is active, asserting ATN\n"); + wait = TRUE; + } else if (disconnected) { + + /* + * Actually re-queue this SCB in an attempt + * to select the device before it reconnects. + * In either case (selection or reselection), + * we will now issue the approprate message + * to the timed-out device. + * + * Set the MK_MESSAGE control bit indicating + * that we desire to send a message. We + * also set the disconnected flag since + * in the paging case there is no guarantee + * that our SCB control byte matches the + * version on the card. We don't want the + * sequencer to abort the command thinking + * an unsolicited reselection occurred. + */ + pending_scb->hscb->control |= MK_MESSAGE|DISCONNECTED; + pending_scb->flags |= SCB_RECOVERY_SCB|flag; + + /* + * Remove any cached copy of this SCB in the + * disconnected list in preparation for the + * queuing of our abort SCB. We use the + * same element in the SCB, SCB_NEXT, for + * both the qinfifo and the disconnected list. + */ + ahc_search_disc_list(ahc, cmd->device->id, + cmd->device->channel + 'A', + cmd->device->lun, pending_scb->hscb->tag, + /*stop_on_first*/TRUE, + /*remove*/TRUE, + /*save_state*/FALSE); + + /* + * In the non-paging case, the sequencer will + * never re-reference the in-core SCB. + * To make sure we are notified during + * reselection, set the MK_MESSAGE flag in + * the card's copy of the SCB. + */ + if ((ahc->flags & AHC_PAGESCBS) == 0) { + ahc_outb(ahc, SCBPTR, pending_scb->hscb->tag); + ahc_outb(ahc, SCB_CONTROL, + ahc_inb(ahc, SCB_CONTROL)|MK_MESSAGE); + } + + /* + * Clear out any entries in the QINFIFO first + * so we are the next SCB for this target + * to run. + */ + ahc_search_qinfifo(ahc, cmd->device->id, + cmd->device->channel + 'A', + cmd->device->lun, SCB_LIST_NULL, + ROLE_INITIATOR, CAM_REQUEUE_REQ, + SEARCH_COMPLETE); + ahc_qinfifo_requeue_tail(ahc, pending_scb); + ahc_outb(ahc, SCBPTR, saved_scbptr); + ahc_print_path(ahc, pending_scb); + printk("Device is disconnected, re-queuing SCB\n"); + wait = TRUE; + } else { + scmd_printk(KERN_INFO, cmd, "Unable to deliver message\n"); + retval = FAILED; + goto done; + } + +no_cmd: + /* + * Our assumption is that if we don't have the command, no + * recovery action was required, so we return success. Again, + * the semantics of the mid-layer recovery engine are not + * well defined, so this may change in time. + */ + retval = SUCCESS; +done: + if (paused) + ahc_unpause(ahc); + if (wait) { + DECLARE_COMPLETION_ONSTACK(done); + + ahc->platform_data->eh_done = &done; + ahc_unlock(ahc, &flags); + + printk("Recovery code sleeping\n"); + if (!wait_for_completion_timeout(&done, 5 * HZ)) { + ahc_lock(ahc, &flags); + ahc->platform_data->eh_done = NULL; + ahc_unlock(ahc, &flags); + + printk("Timer Expired\n"); + retval = FAILED; + } + printk("Recovery code awake\n"); + } else + ahc_unlock(ahc, &flags); + return (retval); +} + +static void ahc_linux_set_width(struct scsi_target *starget, int width) +{ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct ahc_softc *ahc = *((struct ahc_softc **)shost->hostdata); + struct ahc_devinfo devinfo; + unsigned long flags; + + ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, + starget->channel + 'A', ROLE_INITIATOR); + ahc_lock(ahc, &flags); + ahc_set_width(ahc, &devinfo, width, AHC_TRANS_GOAL, FALSE); + ahc_unlock(ahc, &flags); +} + +static void ahc_linux_set_period(struct scsi_target *starget, int period) +{ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct ahc_softc *ahc = *((struct ahc_softc **)shost->hostdata); + struct ahc_tmode_tstate *tstate; + struct ahc_initiator_tinfo *tinfo + = ahc_fetch_transinfo(ahc, + starget->channel + 'A', + shost->this_id, starget->id, &tstate); + struct ahc_devinfo devinfo; + unsigned int ppr_options = tinfo->goal.ppr_options; + unsigned long flags; + unsigned long offset = tinfo->goal.offset; + const struct ahc_syncrate *syncrate; + + if (offset == 0) + offset = MAX_OFFSET; + + if (period < 9) + period = 9; /* 12.5ns is our minimum */ + if (period == 9) { + if (spi_max_width(starget)) + ppr_options |= MSG_EXT_PPR_DT_REQ; + else + /* need wide for DT and need DT for 12.5 ns */ + period = 10; + } + + ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, + starget->channel + 'A', ROLE_INITIATOR); + + /* all PPR requests apart from QAS require wide transfers */ + if (ppr_options & ~MSG_EXT_PPR_QAS_REQ) { + if (spi_width(starget) == 0) + ppr_options &= MSG_EXT_PPR_QAS_REQ; + } + + syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, + AHC_SYNCRATE_DT); + ahc_lock(ahc, &flags); + ahc_set_syncrate(ahc, &devinfo, syncrate, period, offset, + ppr_options, AHC_TRANS_GOAL, FALSE); + ahc_unlock(ahc, &flags); +} + +static void ahc_linux_set_offset(struct scsi_target *starget, int offset) +{ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct ahc_softc *ahc = *((struct ahc_softc **)shost->hostdata); + struct ahc_tmode_tstate *tstate; + struct ahc_initiator_tinfo *tinfo + = ahc_fetch_transinfo(ahc, + starget->channel + 'A', + shost->this_id, starget->id, &tstate); + struct ahc_devinfo devinfo; + unsigned int ppr_options = 0; + unsigned int period = 0; + unsigned long flags; + const struct ahc_syncrate *syncrate = NULL; + + ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, + starget->channel + 'A', ROLE_INITIATOR); + if (offset != 0) { + syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, + AHC_SYNCRATE_DT); + period = tinfo->goal.period; + ppr_options = tinfo->goal.ppr_options; + } + ahc_lock(ahc, &flags); + ahc_set_syncrate(ahc, &devinfo, syncrate, period, offset, + ppr_options, AHC_TRANS_GOAL, FALSE); + ahc_unlock(ahc, &flags); +} + +static void ahc_linux_set_dt(struct scsi_target *starget, int dt) +{ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct ahc_softc *ahc = *((struct ahc_softc **)shost->hostdata); + struct ahc_tmode_tstate *tstate; + struct ahc_initiator_tinfo *tinfo + = ahc_fetch_transinfo(ahc, + starget->channel + 'A', + shost->this_id, starget->id, &tstate); + struct ahc_devinfo devinfo; + unsigned int ppr_options = tinfo->goal.ppr_options + & ~MSG_EXT_PPR_DT_REQ; + unsigned int period = tinfo->goal.period; + unsigned int width = tinfo->goal.width; + unsigned long flags; + const struct ahc_syncrate *syncrate; + + if (dt && spi_max_width(starget)) { + ppr_options |= MSG_EXT_PPR_DT_REQ; + if (!width) + ahc_linux_set_width(starget, 1); + } else if (period == 9) + period = 10; /* if resetting DT, period must be >= 25ns */ + + ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, + starget->channel + 'A', ROLE_INITIATOR); + syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, + AHC_SYNCRATE_DT); + ahc_lock(ahc, &flags); + ahc_set_syncrate(ahc, &devinfo, syncrate, period, tinfo->goal.offset, + ppr_options, AHC_TRANS_GOAL, FALSE); + ahc_unlock(ahc, &flags); +} + +#if 0 +/* FIXME: This code claims to support IU and QAS. However, the actual + * sequencer code and aic7xxx_core have no support for these parameters and + * will get into a bad state if they're negotiated. Do not enable this + * unless you know what you're doing */ +static void ahc_linux_set_qas(struct scsi_target *starget, int qas) +{ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct ahc_softc *ahc = *((struct ahc_softc **)shost->hostdata); + struct ahc_tmode_tstate *tstate; + struct ahc_initiator_tinfo *tinfo + = ahc_fetch_transinfo(ahc, + starget->channel + 'A', + shost->this_id, starget->id, &tstate); + struct ahc_devinfo devinfo; + unsigned int ppr_options = tinfo->goal.ppr_options + & ~MSG_EXT_PPR_QAS_REQ; + unsigned int period = tinfo->goal.period; + unsigned long flags; + struct ahc_syncrate *syncrate; + + if (qas) + ppr_options |= MSG_EXT_PPR_QAS_REQ; + + ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, + starget->channel + 'A', ROLE_INITIATOR); + syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, + AHC_SYNCRATE_DT); + ahc_lock(ahc, &flags); + ahc_set_syncrate(ahc, &devinfo, syncrate, period, tinfo->goal.offset, + ppr_options, AHC_TRANS_GOAL, FALSE); + ahc_unlock(ahc, &flags); +} + +static void ahc_linux_set_iu(struct scsi_target *starget, int iu) +{ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct ahc_softc *ahc = *((struct ahc_softc **)shost->hostdata); + struct ahc_tmode_tstate *tstate; + struct ahc_initiator_tinfo *tinfo + = ahc_fetch_transinfo(ahc, + starget->channel + 'A', + shost->this_id, starget->id, &tstate); + struct ahc_devinfo devinfo; + unsigned int ppr_options = tinfo->goal.ppr_options + & ~MSG_EXT_PPR_IU_REQ; + unsigned int period = tinfo->goal.period; + unsigned long flags; + struct ahc_syncrate *syncrate; + + if (iu) + ppr_options |= MSG_EXT_PPR_IU_REQ; + + ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, + starget->channel + 'A', ROLE_INITIATOR); + syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, + AHC_SYNCRATE_DT); + ahc_lock(ahc, &flags); + ahc_set_syncrate(ahc, &devinfo, syncrate, period, tinfo->goal.offset, + ppr_options, AHC_TRANS_GOAL, FALSE); + ahc_unlock(ahc, &flags); +} +#endif + +static void ahc_linux_get_signalling(struct Scsi_Host *shost) +{ + struct ahc_softc *ahc = *(struct ahc_softc **)shost->hostdata; + unsigned long flags; + u8 mode; + + if (!(ahc->features & AHC_ULTRA2)) { + /* non-LVD chipset, may not have SBLKCTL reg */ + spi_signalling(shost) = + ahc->features & AHC_HVD ? + SPI_SIGNAL_HVD : + SPI_SIGNAL_SE; + return; + } + + ahc_lock(ahc, &flags); + ahc_pause(ahc); + mode = ahc_inb(ahc, SBLKCTL); + ahc_unpause(ahc); + ahc_unlock(ahc, &flags); + + if (mode & ENAB40) + spi_signalling(shost) = SPI_SIGNAL_LVD; + else if (mode & ENAB20) + spi_signalling(shost) = SPI_SIGNAL_SE; + else + spi_signalling(shost) = SPI_SIGNAL_UNKNOWN; +} + +static struct spi_function_template ahc_linux_transport_functions = { + .set_offset = ahc_linux_set_offset, + .show_offset = 1, + .set_period = ahc_linux_set_period, + .show_period = 1, + .set_width = ahc_linux_set_width, + .show_width = 1, + .set_dt = ahc_linux_set_dt, + .show_dt = 1, +#if 0 + .set_iu = ahc_linux_set_iu, + .show_iu = 1, + .set_qas = ahc_linux_set_qas, + .show_qas = 1, +#endif + .get_signalling = ahc_linux_get_signalling, +}; + + + +static int __init +ahc_linux_init(void) +{ + /* + * If we've been passed any parameters, process them now. + */ + if (aic7xxx) + aic7xxx_setup(aic7xxx); + + ahc_linux_transport_template = + spi_attach_transport(&ahc_linux_transport_functions); + if (!ahc_linux_transport_template) + return -ENODEV; + + scsi_transport_reserve_device(ahc_linux_transport_template, + sizeof(struct ahc_linux_device)); + + ahc_linux_pci_init(); + ahc_linux_eisa_init(); + return 0; +} + +static void +ahc_linux_exit(void) +{ + ahc_linux_pci_exit(); + ahc_linux_eisa_exit(); + spi_release_transport(ahc_linux_transport_template); +} + +module_init(ahc_linux_init); +module_exit(ahc_linux_exit); -- cgit v1.2.3