From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/scsi/device_handler/scsi_dh_alua.c | 1287 ++++++++++++++++++++++++++++ 1 file changed, 1287 insertions(+) create mode 100644 drivers/scsi/device_handler/scsi_dh_alua.c (limited to 'drivers/scsi/device_handler/scsi_dh_alua.c') diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c new file mode 100644 index 000000000..0781f991e --- /dev/null +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -0,0 +1,1287 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Generic SCSI-3 ALUA SCSI Device Handler + * + * Copyright (C) 2007-2010 Hannes Reinecke, SUSE Linux Products GmbH. + * All rights reserved. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define ALUA_DH_NAME "alua" +#define ALUA_DH_VER "2.0" + +#define TPGS_SUPPORT_NONE 0x00 +#define TPGS_SUPPORT_OPTIMIZED 0x01 +#define TPGS_SUPPORT_NONOPTIMIZED 0x02 +#define TPGS_SUPPORT_STANDBY 0x04 +#define TPGS_SUPPORT_UNAVAILABLE 0x08 +#define TPGS_SUPPORT_LBA_DEPENDENT 0x10 +#define TPGS_SUPPORT_OFFLINE 0x40 +#define TPGS_SUPPORT_TRANSITION 0x80 +#define TPGS_SUPPORT_ALL 0xdf + +#define RTPG_FMT_MASK 0x70 +#define RTPG_FMT_EXT_HDR 0x10 + +#define TPGS_MODE_UNINITIALIZED -1 +#define TPGS_MODE_NONE 0x0 +#define TPGS_MODE_IMPLICIT 0x1 +#define TPGS_MODE_EXPLICIT 0x2 + +#define ALUA_RTPG_SIZE 128 +#define ALUA_FAILOVER_TIMEOUT 60 +#define ALUA_FAILOVER_RETRIES 5 +#define ALUA_RTPG_DELAY_MSECS 5 +#define ALUA_RTPG_RETRY_DELAY 2 + +/* device handler flags */ +#define ALUA_OPTIMIZE_STPG 0x01 +#define ALUA_RTPG_EXT_HDR_UNSUPP 0x02 +/* State machine flags */ +#define ALUA_PG_RUN_RTPG 0x10 +#define ALUA_PG_RUN_STPG 0x20 +#define ALUA_PG_RUNNING 0x40 + +static uint optimize_stpg; +module_param(optimize_stpg, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(optimize_stpg, "Allow use of a non-optimized path, rather than sending a STPG, when implicit TPGS is supported (0=No,1=Yes). Default is 0."); + +static LIST_HEAD(port_group_list); +static DEFINE_SPINLOCK(port_group_lock); +static struct workqueue_struct *kaluad_wq; + +struct alua_port_group { + struct kref kref; + struct rcu_head rcu; + struct list_head node; + struct list_head dh_list; + unsigned char device_id_str[256]; + int device_id_len; + int group_id; + int tpgs; + int state; + int pref; + int valid_states; + unsigned flags; /* used for optimizing STPG */ + unsigned char transition_tmo; + unsigned long expiry; + unsigned long interval; + struct delayed_work rtpg_work; + spinlock_t lock; + struct list_head rtpg_list; + struct scsi_device *rtpg_sdev; +}; + +struct alua_dh_data { + struct list_head node; + struct alua_port_group __rcu *pg; + int group_id; + spinlock_t pg_lock; + struct scsi_device *sdev; + int init_error; + struct mutex init_mutex; + bool disabled; +}; + +struct alua_queue_data { + struct list_head entry; + activate_complete callback_fn; + void *callback_data; +}; + +#define ALUA_POLICY_SWITCH_CURRENT 0 +#define ALUA_POLICY_SWITCH_ALL 1 + +static void alua_rtpg_work(struct work_struct *work); +static bool alua_rtpg_queue(struct alua_port_group *pg, + struct scsi_device *sdev, + struct alua_queue_data *qdata, bool force); +static void alua_check(struct scsi_device *sdev, bool force); + +static void release_port_group(struct kref *kref) +{ + struct alua_port_group *pg; + + pg = container_of(kref, struct alua_port_group, kref); + if (pg->rtpg_sdev) + flush_delayed_work(&pg->rtpg_work); + spin_lock(&port_group_lock); + list_del(&pg->node); + spin_unlock(&port_group_lock); + kfree_rcu(pg, rcu); +} + +/* + * submit_rtpg - Issue a REPORT TARGET GROUP STATES command + * @sdev: sdev the command should be sent to + */ +static int submit_rtpg(struct scsi_device *sdev, unsigned char *buff, + int bufflen, struct scsi_sense_hdr *sshdr, int flags) +{ + u8 cdb[MAX_COMMAND_SIZE]; + blk_opf_t req_flags = REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER; + + /* Prepare the command. */ + memset(cdb, 0x0, MAX_COMMAND_SIZE); + cdb[0] = MAINTENANCE_IN; + if (!(flags & ALUA_RTPG_EXT_HDR_UNSUPP)) + cdb[1] = MI_REPORT_TARGET_PGS | MI_EXT_HDR_PARAM_FMT; + else + cdb[1] = MI_REPORT_TARGET_PGS; + put_unaligned_be32(bufflen, &cdb[6]); + + return scsi_execute(sdev, cdb, DMA_FROM_DEVICE, buff, bufflen, NULL, + sshdr, ALUA_FAILOVER_TIMEOUT * HZ, + ALUA_FAILOVER_RETRIES, req_flags, 0, NULL); +} + +/* + * submit_stpg - Issue a SET TARGET PORT GROUP command + * + * Currently we're only setting the current target port group state + * to 'active/optimized' and let the array firmware figure out + * the states of the remaining groups. + */ +static int submit_stpg(struct scsi_device *sdev, int group_id, + struct scsi_sense_hdr *sshdr) +{ + u8 cdb[MAX_COMMAND_SIZE]; + unsigned char stpg_data[8]; + int stpg_len = 8; + blk_opf_t req_flags = REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | + REQ_FAILFAST_DRIVER; + + /* Prepare the data buffer */ + memset(stpg_data, 0, stpg_len); + stpg_data[4] = SCSI_ACCESS_STATE_OPTIMAL; + put_unaligned_be16(group_id, &stpg_data[6]); + + /* Prepare the command. */ + memset(cdb, 0x0, MAX_COMMAND_SIZE); + cdb[0] = MAINTENANCE_OUT; + cdb[1] = MO_SET_TARGET_PGS; + put_unaligned_be32(stpg_len, &cdb[6]); + + return scsi_execute(sdev, cdb, DMA_TO_DEVICE, stpg_data, stpg_len, NULL, + sshdr, ALUA_FAILOVER_TIMEOUT * HZ, + ALUA_FAILOVER_RETRIES, req_flags, 0, NULL); +} + +static struct alua_port_group *alua_find_get_pg(char *id_str, size_t id_size, + int group_id) +{ + struct alua_port_group *pg; + + if (!id_str || !id_size || !strlen(id_str)) + return NULL; + + list_for_each_entry(pg, &port_group_list, node) { + if (pg->group_id != group_id) + continue; + if (!pg->device_id_len || pg->device_id_len != id_size) + continue; + if (strncmp(pg->device_id_str, id_str, id_size)) + continue; + if (!kref_get_unless_zero(&pg->kref)) + continue; + return pg; + } + + return NULL; +} + +/* + * alua_alloc_pg - Allocate a new port_group structure + * @sdev: scsi device + * @group_id: port group id + * @tpgs: target port group settings + * + * Allocate a new port_group structure for a given + * device. + */ +static struct alua_port_group *alua_alloc_pg(struct scsi_device *sdev, + int group_id, int tpgs) +{ + struct alua_port_group *pg, *tmp_pg; + + pg = kzalloc(sizeof(struct alua_port_group), GFP_KERNEL); + if (!pg) + return ERR_PTR(-ENOMEM); + + pg->device_id_len = scsi_vpd_lun_id(sdev, pg->device_id_str, + sizeof(pg->device_id_str)); + if (pg->device_id_len <= 0) { + /* + * TPGS supported but no device identification found. + * Generate private device identification. + */ + sdev_printk(KERN_INFO, sdev, + "%s: No device descriptors found\n", + ALUA_DH_NAME); + pg->device_id_str[0] = '\0'; + pg->device_id_len = 0; + } + pg->group_id = group_id; + pg->tpgs = tpgs; + pg->state = SCSI_ACCESS_STATE_OPTIMAL; + pg->valid_states = TPGS_SUPPORT_ALL; + if (optimize_stpg) + pg->flags |= ALUA_OPTIMIZE_STPG; + kref_init(&pg->kref); + INIT_DELAYED_WORK(&pg->rtpg_work, alua_rtpg_work); + INIT_LIST_HEAD(&pg->rtpg_list); + INIT_LIST_HEAD(&pg->node); + INIT_LIST_HEAD(&pg->dh_list); + spin_lock_init(&pg->lock); + + spin_lock(&port_group_lock); + tmp_pg = alua_find_get_pg(pg->device_id_str, pg->device_id_len, + group_id); + if (tmp_pg) { + spin_unlock(&port_group_lock); + kfree(pg); + return tmp_pg; + } + + list_add(&pg->node, &port_group_list); + spin_unlock(&port_group_lock); + + return pg; +} + +/* + * alua_check_tpgs - Evaluate TPGS setting + * @sdev: device to be checked + * + * Examine the TPGS setting of the sdev to find out if ALUA + * is supported. + */ +static int alua_check_tpgs(struct scsi_device *sdev) +{ + int tpgs = TPGS_MODE_NONE; + + /* + * ALUA support for non-disk devices is fraught with + * difficulties, so disable it for now. + */ + if (sdev->type != TYPE_DISK) { + sdev_printk(KERN_INFO, sdev, + "%s: disable for non-disk devices\n", + ALUA_DH_NAME); + return tpgs; + } + + tpgs = scsi_device_tpgs(sdev); + switch (tpgs) { + case TPGS_MODE_EXPLICIT|TPGS_MODE_IMPLICIT: + sdev_printk(KERN_INFO, sdev, + "%s: supports implicit and explicit TPGS\n", + ALUA_DH_NAME); + break; + case TPGS_MODE_EXPLICIT: + sdev_printk(KERN_INFO, sdev, "%s: supports explicit TPGS\n", + ALUA_DH_NAME); + break; + case TPGS_MODE_IMPLICIT: + sdev_printk(KERN_INFO, sdev, "%s: supports implicit TPGS\n", + ALUA_DH_NAME); + break; + case TPGS_MODE_NONE: + sdev_printk(KERN_INFO, sdev, "%s: not supported\n", + ALUA_DH_NAME); + break; + default: + sdev_printk(KERN_INFO, sdev, + "%s: unsupported TPGS setting %d\n", + ALUA_DH_NAME, tpgs); + tpgs = TPGS_MODE_NONE; + break; + } + + return tpgs; +} + +/* + * alua_check_vpd - Evaluate INQUIRY vpd page 0x83 + * @sdev: device to be checked + * + * Extract the relative target port and the target port group + * descriptor from the list of identificators. + */ +static int alua_check_vpd(struct scsi_device *sdev, struct alua_dh_data *h, + int tpgs) +{ + int rel_port = -1, group_id; + struct alua_port_group *pg, *old_pg = NULL; + bool pg_updated = false; + unsigned long flags; + + group_id = scsi_vpd_tpg_id(sdev, &rel_port); + if (group_id < 0) { + /* + * Internal error; TPGS supported but required + * VPD identification descriptors not present. + * Disable ALUA support + */ + sdev_printk(KERN_INFO, sdev, + "%s: No target port descriptors found\n", + ALUA_DH_NAME); + return SCSI_DH_DEV_UNSUPP; + } + + pg = alua_alloc_pg(sdev, group_id, tpgs); + if (IS_ERR(pg)) { + if (PTR_ERR(pg) == -ENOMEM) + return SCSI_DH_NOMEM; + return SCSI_DH_DEV_UNSUPP; + } + if (pg->device_id_len) + sdev_printk(KERN_INFO, sdev, + "%s: device %s port group %x rel port %x\n", + ALUA_DH_NAME, pg->device_id_str, + group_id, rel_port); + else + sdev_printk(KERN_INFO, sdev, + "%s: port group %x rel port %x\n", + ALUA_DH_NAME, group_id, rel_port); + + /* Check for existing port group references */ + spin_lock(&h->pg_lock); + old_pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock)); + if (old_pg != pg) { + /* port group has changed. Update to new port group */ + if (h->pg) { + spin_lock_irqsave(&old_pg->lock, flags); + list_del_rcu(&h->node); + spin_unlock_irqrestore(&old_pg->lock, flags); + } + rcu_assign_pointer(h->pg, pg); + pg_updated = true; + } + + spin_lock_irqsave(&pg->lock, flags); + if (pg_updated) + list_add_rcu(&h->node, &pg->dh_list); + spin_unlock_irqrestore(&pg->lock, flags); + + alua_rtpg_queue(rcu_dereference_protected(h->pg, + lockdep_is_held(&h->pg_lock)), + sdev, NULL, true); + spin_unlock(&h->pg_lock); + + if (old_pg) + kref_put(&old_pg->kref, release_port_group); + + return SCSI_DH_OK; +} + +static char print_alua_state(unsigned char state) +{ + switch (state) { + case SCSI_ACCESS_STATE_OPTIMAL: + return 'A'; + case SCSI_ACCESS_STATE_ACTIVE: + return 'N'; + case SCSI_ACCESS_STATE_STANDBY: + return 'S'; + case SCSI_ACCESS_STATE_UNAVAILABLE: + return 'U'; + case SCSI_ACCESS_STATE_LBA: + return 'L'; + case SCSI_ACCESS_STATE_OFFLINE: + return 'O'; + case SCSI_ACCESS_STATE_TRANSITIONING: + return 'T'; + default: + return 'X'; + } +} + +static enum scsi_disposition alua_check_sense(struct scsi_device *sdev, + struct scsi_sense_hdr *sense_hdr) +{ + struct alua_dh_data *h = sdev->handler_data; + struct alua_port_group *pg; + + switch (sense_hdr->sense_key) { + case NOT_READY: + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) { + /* + * LUN Not Accessible - ALUA state transition + */ + rcu_read_lock(); + pg = rcu_dereference(h->pg); + if (pg) + pg->state = SCSI_ACCESS_STATE_TRANSITIONING; + rcu_read_unlock(); + alua_check(sdev, false); + return NEEDS_RETRY; + } + break; + case UNIT_ATTENTION: + if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) { + /* + * Power On, Reset, or Bus Device Reset. + * Might have obscured a state transition, + * so schedule a recheck. + */ + alua_check(sdev, true); + return ADD_TO_MLQUEUE; + } + if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x04) + /* + * Device internal reset + */ + return ADD_TO_MLQUEUE; + if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x01) + /* + * Mode Parameters Changed + */ + return ADD_TO_MLQUEUE; + if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) { + /* + * ALUA state changed + */ + alua_check(sdev, true); + return ADD_TO_MLQUEUE; + } + if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07) { + /* + * Implicit ALUA state transition failed + */ + alua_check(sdev, true); + return ADD_TO_MLQUEUE; + } + if (sense_hdr->asc == 0x3f && sense_hdr->ascq == 0x03) + /* + * Inquiry data has changed + */ + return ADD_TO_MLQUEUE; + if (sense_hdr->asc == 0x3f && sense_hdr->ascq == 0x0e) + /* + * REPORTED_LUNS_DATA_HAS_CHANGED is reported + * when switching controllers on targets like + * Intel Multi-Flex. We can just retry. + */ + return ADD_TO_MLQUEUE; + break; + } + + return SCSI_RETURN_NOT_HANDLED; +} + +/* + * alua_tur - Send a TEST UNIT READY + * @sdev: device to which the TEST UNIT READY command should be send + * + * Send a TEST UNIT READY to @sdev to figure out the device state + * Returns SCSI_DH_RETRY if the sense code is NOT READY/ALUA TRANSITIONING, + * SCSI_DH_OK if no error occurred, and SCSI_DH_IO otherwise. + */ +static int alua_tur(struct scsi_device *sdev) +{ + struct scsi_sense_hdr sense_hdr; + int retval; + + retval = scsi_test_unit_ready(sdev, ALUA_FAILOVER_TIMEOUT * HZ, + ALUA_FAILOVER_RETRIES, &sense_hdr); + if (sense_hdr.sense_key == NOT_READY && + sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a) + return SCSI_DH_RETRY; + else if (retval) + return SCSI_DH_IO; + else + return SCSI_DH_OK; +} + +/* + * alua_rtpg - Evaluate REPORT TARGET GROUP STATES + * @sdev: the device to be evaluated. + * + * Evaluate the Target Port Group State. + * Returns SCSI_DH_DEV_OFFLINED if the path is + * found to be unusable. + */ +static int alua_rtpg(struct scsi_device *sdev, struct alua_port_group *pg) +{ + struct scsi_sense_hdr sense_hdr; + struct alua_port_group *tmp_pg; + int len, k, off, bufflen = ALUA_RTPG_SIZE; + int group_id_old, state_old, pref_old, valid_states_old; + unsigned char *desc, *buff; + unsigned err; + int retval; + unsigned int tpg_desc_tbl_off; + unsigned char orig_transition_tmo; + unsigned long flags; + bool transitioning_sense = false; + + group_id_old = pg->group_id; + state_old = pg->state; + pref_old = pg->pref; + valid_states_old = pg->valid_states; + + if (!pg->expiry) { + unsigned long transition_tmo = ALUA_FAILOVER_TIMEOUT * HZ; + + if (pg->transition_tmo) + transition_tmo = pg->transition_tmo * HZ; + + pg->expiry = round_jiffies_up(jiffies + transition_tmo); + } + + buff = kzalloc(bufflen, GFP_KERNEL); + if (!buff) + return SCSI_DH_DEV_TEMP_BUSY; + + retry: + err = 0; + retval = submit_rtpg(sdev, buff, bufflen, &sense_hdr, pg->flags); + + if (retval) { + /* + * Some (broken) implementations have a habit of returning + * an error during things like firmware update etc. + * But if the target only supports active/optimized there's + * not much we can do; it's not that we can switch paths + * or anything. + * So ignore any errors to avoid spurious failures during + * path failover. + */ + if ((pg->valid_states & ~TPGS_SUPPORT_OPTIMIZED) == 0) { + sdev_printk(KERN_INFO, sdev, + "%s: ignoring rtpg result %d\n", + ALUA_DH_NAME, retval); + kfree(buff); + return SCSI_DH_OK; + } + if (retval < 0 || !scsi_sense_valid(&sense_hdr)) { + sdev_printk(KERN_INFO, sdev, + "%s: rtpg failed, result %d\n", + ALUA_DH_NAME, retval); + kfree(buff); + if (retval < 0) + return SCSI_DH_DEV_TEMP_BUSY; + if (host_byte(retval) == DID_NO_CONNECT) + return SCSI_DH_RES_TEMP_UNAVAIL; + return SCSI_DH_IO; + } + + /* + * submit_rtpg() has failed on existing arrays + * when requesting extended header info, and + * the array doesn't support extended headers, + * even though it shouldn't according to T10. + * The retry without rtpg_ext_hdr_req set + * handles this. + * Note: some arrays return a sense key of ILLEGAL_REQUEST + * with ASC 00h if they don't support the extended header. + */ + if (!(pg->flags & ALUA_RTPG_EXT_HDR_UNSUPP) && + sense_hdr.sense_key == ILLEGAL_REQUEST) { + pg->flags |= ALUA_RTPG_EXT_HDR_UNSUPP; + goto retry; + } + /* + * If the array returns with 'ALUA state transition' + * sense code here it cannot return RTPG data during + * transition. So set the state to 'transitioning' directly. + */ + if (sense_hdr.sense_key == NOT_READY && + sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a) { + transitioning_sense = true; + goto skip_rtpg; + } + /* + * Retry on any other UNIT ATTENTION occurred. + */ + if (sense_hdr.sense_key == UNIT_ATTENTION) + err = SCSI_DH_RETRY; + if (err == SCSI_DH_RETRY && + pg->expiry != 0 && time_before(jiffies, pg->expiry)) { + sdev_printk(KERN_ERR, sdev, "%s: rtpg retry\n", + ALUA_DH_NAME); + scsi_print_sense_hdr(sdev, ALUA_DH_NAME, &sense_hdr); + kfree(buff); + return err; + } + sdev_printk(KERN_ERR, sdev, "%s: rtpg failed\n", + ALUA_DH_NAME); + scsi_print_sense_hdr(sdev, ALUA_DH_NAME, &sense_hdr); + kfree(buff); + pg->expiry = 0; + return SCSI_DH_IO; + } + + len = get_unaligned_be32(&buff[0]) + 4; + + if (len > bufflen) { + /* Resubmit with the correct length */ + kfree(buff); + bufflen = len; + buff = kmalloc(bufflen, GFP_KERNEL); + if (!buff) { + sdev_printk(KERN_WARNING, sdev, + "%s: kmalloc buffer failed\n",__func__); + /* Temporary failure, bypass */ + pg->expiry = 0; + return SCSI_DH_DEV_TEMP_BUSY; + } + goto retry; + } + + orig_transition_tmo = pg->transition_tmo; + if ((buff[4] & RTPG_FMT_MASK) == RTPG_FMT_EXT_HDR && buff[5] != 0) + pg->transition_tmo = buff[5]; + else + pg->transition_tmo = ALUA_FAILOVER_TIMEOUT; + + if (orig_transition_tmo != pg->transition_tmo) { + sdev_printk(KERN_INFO, sdev, + "%s: transition timeout set to %d seconds\n", + ALUA_DH_NAME, pg->transition_tmo); + pg->expiry = jiffies + pg->transition_tmo * HZ; + } + + if ((buff[4] & RTPG_FMT_MASK) == RTPG_FMT_EXT_HDR) + tpg_desc_tbl_off = 8; + else + tpg_desc_tbl_off = 4; + + for (k = tpg_desc_tbl_off, desc = buff + tpg_desc_tbl_off; + k < len; + k += off, desc += off) { + u16 group_id = get_unaligned_be16(&desc[2]); + + spin_lock_irqsave(&port_group_lock, flags); + tmp_pg = alua_find_get_pg(pg->device_id_str, pg->device_id_len, + group_id); + spin_unlock_irqrestore(&port_group_lock, flags); + if (tmp_pg) { + if (spin_trylock_irqsave(&tmp_pg->lock, flags)) { + if ((tmp_pg == pg) || + !(tmp_pg->flags & ALUA_PG_RUNNING)) { + struct alua_dh_data *h; + + tmp_pg->state = desc[0] & 0x0f; + tmp_pg->pref = desc[0] >> 7; + rcu_read_lock(); + list_for_each_entry_rcu(h, + &tmp_pg->dh_list, node) { + if (!h->sdev) + continue; + h->sdev->access_state = desc[0]; + } + rcu_read_unlock(); + } + if (tmp_pg == pg) + tmp_pg->valid_states = desc[1]; + spin_unlock_irqrestore(&tmp_pg->lock, flags); + } + kref_put(&tmp_pg->kref, release_port_group); + } + off = 8 + (desc[7] * 4); + } + + skip_rtpg: + spin_lock_irqsave(&pg->lock, flags); + if (transitioning_sense) + pg->state = SCSI_ACCESS_STATE_TRANSITIONING; + + if (group_id_old != pg->group_id || state_old != pg->state || + pref_old != pg->pref || valid_states_old != pg->valid_states) + sdev_printk(KERN_INFO, sdev, + "%s: port group %02x state %c %s supports %c%c%c%c%c%c%c\n", + ALUA_DH_NAME, pg->group_id, print_alua_state(pg->state), + pg->pref ? "preferred" : "non-preferred", + pg->valid_states&TPGS_SUPPORT_TRANSITION?'T':'t', + pg->valid_states&TPGS_SUPPORT_OFFLINE?'O':'o', + pg->valid_states&TPGS_SUPPORT_LBA_DEPENDENT?'L':'l', + pg->valid_states&TPGS_SUPPORT_UNAVAILABLE?'U':'u', + pg->valid_states&TPGS_SUPPORT_STANDBY?'S':'s', + pg->valid_states&TPGS_SUPPORT_NONOPTIMIZED?'N':'n', + pg->valid_states&TPGS_SUPPORT_OPTIMIZED?'A':'a'); + + switch (pg->state) { + case SCSI_ACCESS_STATE_TRANSITIONING: + if (time_before(jiffies, pg->expiry)) { + /* State transition, retry */ + pg->interval = ALUA_RTPG_RETRY_DELAY; + err = SCSI_DH_RETRY; + } else { + struct alua_dh_data *h; + + /* Transitioning time exceeded, set port to standby */ + err = SCSI_DH_IO; + pg->state = SCSI_ACCESS_STATE_STANDBY; + pg->expiry = 0; + rcu_read_lock(); + list_for_each_entry_rcu(h, &pg->dh_list, node) { + if (!h->sdev) + continue; + h->sdev->access_state = + (pg->state & SCSI_ACCESS_STATE_MASK); + if (pg->pref) + h->sdev->access_state |= + SCSI_ACCESS_STATE_PREFERRED; + } + rcu_read_unlock(); + } + break; + case SCSI_ACCESS_STATE_OFFLINE: + /* Path unusable */ + err = SCSI_DH_DEV_OFFLINED; + pg->expiry = 0; + break; + default: + /* Useable path if active */ + err = SCSI_DH_OK; + pg->expiry = 0; + break; + } + spin_unlock_irqrestore(&pg->lock, flags); + kfree(buff); + return err; +} + +/* + * alua_stpg - Issue a SET TARGET PORT GROUP command + * + * Issue a SET TARGET PORT GROUP command and evaluate the + * response. Returns SCSI_DH_RETRY per default to trigger + * a re-evaluation of the target group state or SCSI_DH_OK + * if no further action needs to be taken. + */ +static unsigned alua_stpg(struct scsi_device *sdev, struct alua_port_group *pg) +{ + int retval; + struct scsi_sense_hdr sense_hdr; + + if (!(pg->tpgs & TPGS_MODE_EXPLICIT)) { + /* Only implicit ALUA supported, retry */ + return SCSI_DH_RETRY; + } + switch (pg->state) { + case SCSI_ACCESS_STATE_OPTIMAL: + return SCSI_DH_OK; + case SCSI_ACCESS_STATE_ACTIVE: + if ((pg->flags & ALUA_OPTIMIZE_STPG) && + !pg->pref && + (pg->tpgs & TPGS_MODE_IMPLICIT)) + return SCSI_DH_OK; + break; + case SCSI_ACCESS_STATE_STANDBY: + case SCSI_ACCESS_STATE_UNAVAILABLE: + break; + case SCSI_ACCESS_STATE_OFFLINE: + return SCSI_DH_IO; + case SCSI_ACCESS_STATE_TRANSITIONING: + break; + default: + sdev_printk(KERN_INFO, sdev, + "%s: stpg failed, unhandled TPGS state %d", + ALUA_DH_NAME, pg->state); + return SCSI_DH_NOSYS; + } + retval = submit_stpg(sdev, pg->group_id, &sense_hdr); + + if (retval) { + if (retval < 0 || !scsi_sense_valid(&sense_hdr)) { + sdev_printk(KERN_INFO, sdev, + "%s: stpg failed, result %d", + ALUA_DH_NAME, retval); + if (retval < 0) + return SCSI_DH_DEV_TEMP_BUSY; + } else { + sdev_printk(KERN_INFO, sdev, "%s: stpg failed\n", + ALUA_DH_NAME); + scsi_print_sense_hdr(sdev, ALUA_DH_NAME, &sense_hdr); + } + } + /* Retry RTPG */ + return SCSI_DH_RETRY; +} + +static bool alua_rtpg_select_sdev(struct alua_port_group *pg) +{ + struct alua_dh_data *h; + struct scsi_device *sdev = NULL; + + lockdep_assert_held(&pg->lock); + if (WARN_ON(!pg->rtpg_sdev)) + return false; + + /* + * RCU protection isn't necessary for dh_list here + * as we hold pg->lock, but for access to h->pg. + */ + rcu_read_lock(); + list_for_each_entry_rcu(h, &pg->dh_list, node) { + if (!h->sdev) + continue; + if (h->sdev == pg->rtpg_sdev) { + h->disabled = true; + continue; + } + if (rcu_dereference(h->pg) == pg && + !h->disabled && + !scsi_device_get(h->sdev)) { + sdev = h->sdev; + break; + } + } + rcu_read_unlock(); + + if (!sdev) { + pr_warn("%s: no device found for rtpg\n", + (pg->device_id_len ? + (char *)pg->device_id_str : "(nameless PG)")); + return false; + } + + sdev_printk(KERN_INFO, sdev, "rtpg retry on different device\n"); + + scsi_device_put(pg->rtpg_sdev); + pg->rtpg_sdev = sdev; + + return true; +} + +static void alua_rtpg_work(struct work_struct *work) +{ + struct alua_port_group *pg = + container_of(work, struct alua_port_group, rtpg_work.work); + struct scsi_device *sdev; + LIST_HEAD(qdata_list); + int err = SCSI_DH_OK; + struct alua_queue_data *qdata, *tmp; + struct alua_dh_data *h; + unsigned long flags; + + spin_lock_irqsave(&pg->lock, flags); + sdev = pg->rtpg_sdev; + if (!sdev) { + WARN_ON(pg->flags & ALUA_PG_RUN_RTPG); + WARN_ON(pg->flags & ALUA_PG_RUN_STPG); + spin_unlock_irqrestore(&pg->lock, flags); + kref_put(&pg->kref, release_port_group); + return; + } + pg->flags |= ALUA_PG_RUNNING; + if (pg->flags & ALUA_PG_RUN_RTPG) { + int state = pg->state; + + pg->flags &= ~ALUA_PG_RUN_RTPG; + spin_unlock_irqrestore(&pg->lock, flags); + if (state == SCSI_ACCESS_STATE_TRANSITIONING) { + if (alua_tur(sdev) == SCSI_DH_RETRY) { + spin_lock_irqsave(&pg->lock, flags); + pg->flags &= ~ALUA_PG_RUNNING; + pg->flags |= ALUA_PG_RUN_RTPG; + if (!pg->interval) + pg->interval = ALUA_RTPG_RETRY_DELAY; + spin_unlock_irqrestore(&pg->lock, flags); + queue_delayed_work(kaluad_wq, &pg->rtpg_work, + pg->interval * HZ); + return; + } + /* Send RTPG on failure or if TUR indicates SUCCESS */ + } + err = alua_rtpg(sdev, pg); + spin_lock_irqsave(&pg->lock, flags); + + /* If RTPG failed on the current device, try using another */ + if (err == SCSI_DH_RES_TEMP_UNAVAIL && + alua_rtpg_select_sdev(pg)) + err = SCSI_DH_IMM_RETRY; + + if (err == SCSI_DH_RETRY || err == SCSI_DH_IMM_RETRY || + pg->flags & ALUA_PG_RUN_RTPG) { + pg->flags &= ~ALUA_PG_RUNNING; + if (err == SCSI_DH_IMM_RETRY) + pg->interval = 0; + else if (!pg->interval && !(pg->flags & ALUA_PG_RUN_RTPG)) + pg->interval = ALUA_RTPG_RETRY_DELAY; + pg->flags |= ALUA_PG_RUN_RTPG; + spin_unlock_irqrestore(&pg->lock, flags); + queue_delayed_work(kaluad_wq, &pg->rtpg_work, + pg->interval * HZ); + return; + } + if (err != SCSI_DH_OK) + pg->flags &= ~ALUA_PG_RUN_STPG; + } + if (pg->flags & ALUA_PG_RUN_STPG) { + pg->flags &= ~ALUA_PG_RUN_STPG; + spin_unlock_irqrestore(&pg->lock, flags); + err = alua_stpg(sdev, pg); + spin_lock_irqsave(&pg->lock, flags); + if (err == SCSI_DH_RETRY || pg->flags & ALUA_PG_RUN_RTPG) { + pg->flags |= ALUA_PG_RUN_RTPG; + pg->interval = 0; + pg->flags &= ~ALUA_PG_RUNNING; + spin_unlock_irqrestore(&pg->lock, flags); + queue_delayed_work(kaluad_wq, &pg->rtpg_work, + pg->interval * HZ); + return; + } + } + + list_splice_init(&pg->rtpg_list, &qdata_list); + /* + * We went through an RTPG, for good or bad. + * Re-enable all devices for the next attempt. + */ + list_for_each_entry(h, &pg->dh_list, node) + h->disabled = false; + pg->rtpg_sdev = NULL; + spin_unlock_irqrestore(&pg->lock, flags); + + list_for_each_entry_safe(qdata, tmp, &qdata_list, entry) { + list_del(&qdata->entry); + if (qdata->callback_fn) + qdata->callback_fn(qdata->callback_data, err); + kfree(qdata); + } + spin_lock_irqsave(&pg->lock, flags); + pg->flags &= ~ALUA_PG_RUNNING; + spin_unlock_irqrestore(&pg->lock, flags); + scsi_device_put(sdev); + kref_put(&pg->kref, release_port_group); +} + +/** + * alua_rtpg_queue() - cause RTPG to be submitted asynchronously + * @pg: ALUA port group associated with @sdev. + * @sdev: SCSI device for which to submit an RTPG. + * @qdata: Information about the callback to invoke after the RTPG. + * @force: Whether or not to submit an RTPG if a work item that will submit an + * RTPG already has been scheduled. + * + * Returns true if and only if alua_rtpg_work() will be called asynchronously. + * That function is responsible for calling @qdata->fn(). + */ +static bool alua_rtpg_queue(struct alua_port_group *pg, + struct scsi_device *sdev, + struct alua_queue_data *qdata, bool force) +{ + int start_queue = 0; + unsigned long flags; + if (WARN_ON_ONCE(!pg) || scsi_device_get(sdev)) + return false; + + spin_lock_irqsave(&pg->lock, flags); + if (qdata) { + list_add_tail(&qdata->entry, &pg->rtpg_list); + pg->flags |= ALUA_PG_RUN_STPG; + force = true; + } + if (pg->rtpg_sdev == NULL) { + pg->interval = 0; + pg->flags |= ALUA_PG_RUN_RTPG; + kref_get(&pg->kref); + pg->rtpg_sdev = sdev; + start_queue = 1; + } else if (!(pg->flags & ALUA_PG_RUN_RTPG) && force) { + pg->flags |= ALUA_PG_RUN_RTPG; + /* Do not queue if the worker is already running */ + if (!(pg->flags & ALUA_PG_RUNNING)) { + kref_get(&pg->kref); + start_queue = 1; + } + } + + spin_unlock_irqrestore(&pg->lock, flags); + + if (start_queue) { + if (queue_delayed_work(kaluad_wq, &pg->rtpg_work, + msecs_to_jiffies(ALUA_RTPG_DELAY_MSECS))) + sdev = NULL; + else + kref_put(&pg->kref, release_port_group); + } + if (sdev) + scsi_device_put(sdev); + + return true; +} + +/* + * alua_initialize - Initialize ALUA state + * @sdev: the device to be initialized + * + * For the prep_fn to work correctly we have + * to initialize the ALUA state for the device. + */ +static int alua_initialize(struct scsi_device *sdev, struct alua_dh_data *h) +{ + int err = SCSI_DH_DEV_UNSUPP, tpgs; + + mutex_lock(&h->init_mutex); + h->disabled = false; + tpgs = alua_check_tpgs(sdev); + if (tpgs != TPGS_MODE_NONE) + err = alua_check_vpd(sdev, h, tpgs); + h->init_error = err; + mutex_unlock(&h->init_mutex); + return err; +} +/* + * alua_set_params - set/unset the optimize flag + * @sdev: device on the path to be activated + * params - parameters in the following format + * "no_of_params\0param1\0param2\0param3\0...\0" + * For example, to set the flag pass the following parameters + * from multipath.conf + * hardware_handler "2 alua 1" + */ +static int alua_set_params(struct scsi_device *sdev, const char *params) +{ + struct alua_dh_data *h = sdev->handler_data; + struct alua_port_group *pg = NULL; + unsigned int optimize = 0, argc; + const char *p = params; + int result = SCSI_DH_OK; + unsigned long flags; + + if ((sscanf(params, "%u", &argc) != 1) || (argc != 1)) + return -EINVAL; + + while (*p++) + ; + if ((sscanf(p, "%u", &optimize) != 1) || (optimize > 1)) + return -EINVAL; + + rcu_read_lock(); + pg = rcu_dereference(h->pg); + if (!pg) { + rcu_read_unlock(); + return -ENXIO; + } + spin_lock_irqsave(&pg->lock, flags); + if (optimize) + pg->flags |= ALUA_OPTIMIZE_STPG; + else + pg->flags &= ~ALUA_OPTIMIZE_STPG; + spin_unlock_irqrestore(&pg->lock, flags); + rcu_read_unlock(); + + return result; +} + +/* + * alua_activate - activate a path + * @sdev: device on the path to be activated + * + * We're currently switching the port group to be activated only and + * let the array figure out the rest. + * There may be other arrays which require us to switch all port groups + * based on a certain policy. But until we actually encounter them it + * should be okay. + */ +static int alua_activate(struct scsi_device *sdev, + activate_complete fn, void *data) +{ + struct alua_dh_data *h = sdev->handler_data; + int err = SCSI_DH_OK; + struct alua_queue_data *qdata; + struct alua_port_group *pg; + + qdata = kzalloc(sizeof(*qdata), GFP_KERNEL); + if (!qdata) { + err = SCSI_DH_RES_TEMP_UNAVAIL; + goto out; + } + qdata->callback_fn = fn; + qdata->callback_data = data; + + mutex_lock(&h->init_mutex); + rcu_read_lock(); + pg = rcu_dereference(h->pg); + if (!pg || !kref_get_unless_zero(&pg->kref)) { + rcu_read_unlock(); + kfree(qdata); + err = h->init_error; + mutex_unlock(&h->init_mutex); + goto out; + } + rcu_read_unlock(); + mutex_unlock(&h->init_mutex); + + if (alua_rtpg_queue(pg, sdev, qdata, true)) { + fn = NULL; + } else { + kfree(qdata); + err = SCSI_DH_DEV_OFFLINED; + } + kref_put(&pg->kref, release_port_group); +out: + if (fn) + fn(data, err); + return 0; +} + +/* + * alua_check - check path status + * @sdev: device on the path to be checked + * + * Check the device status + */ +static void alua_check(struct scsi_device *sdev, bool force) +{ + struct alua_dh_data *h = sdev->handler_data; + struct alua_port_group *pg; + + rcu_read_lock(); + pg = rcu_dereference(h->pg); + if (!pg || !kref_get_unless_zero(&pg->kref)) { + rcu_read_unlock(); + return; + } + rcu_read_unlock(); + alua_rtpg_queue(pg, sdev, NULL, force); + kref_put(&pg->kref, release_port_group); +} + +/* + * alua_prep_fn - request callback + * + * Fail I/O to all paths not in state + * active/optimized or active/non-optimized. + */ +static blk_status_t alua_prep_fn(struct scsi_device *sdev, struct request *req) +{ + struct alua_dh_data *h = sdev->handler_data; + struct alua_port_group *pg; + unsigned char state = SCSI_ACCESS_STATE_OPTIMAL; + + rcu_read_lock(); + pg = rcu_dereference(h->pg); + if (pg) + state = pg->state; + rcu_read_unlock(); + + switch (state) { + case SCSI_ACCESS_STATE_OPTIMAL: + case SCSI_ACCESS_STATE_ACTIVE: + case SCSI_ACCESS_STATE_LBA: + case SCSI_ACCESS_STATE_TRANSITIONING: + return BLK_STS_OK; + default: + req->rq_flags |= RQF_QUIET; + return BLK_STS_IOERR; + } +} + +static void alua_rescan(struct scsi_device *sdev) +{ + struct alua_dh_data *h = sdev->handler_data; + + alua_initialize(sdev, h); +} + +/* + * alua_bus_attach - Attach device handler + * @sdev: device to be attached to + */ +static int alua_bus_attach(struct scsi_device *sdev) +{ + struct alua_dh_data *h; + int err; + + h = kzalloc(sizeof(*h) , GFP_KERNEL); + if (!h) + return SCSI_DH_NOMEM; + spin_lock_init(&h->pg_lock); + rcu_assign_pointer(h->pg, NULL); + h->init_error = SCSI_DH_OK; + h->sdev = sdev; + INIT_LIST_HEAD(&h->node); + + mutex_init(&h->init_mutex); + err = alua_initialize(sdev, h); + if (err != SCSI_DH_OK && err != SCSI_DH_DEV_OFFLINED) + goto failed; + + sdev->handler_data = h; + return SCSI_DH_OK; +failed: + kfree(h); + return err; +} + +/* + * alua_bus_detach - Detach device handler + * @sdev: device to be detached from + */ +static void alua_bus_detach(struct scsi_device *sdev) +{ + struct alua_dh_data *h = sdev->handler_data; + struct alua_port_group *pg; + + spin_lock(&h->pg_lock); + pg = rcu_dereference_protected(h->pg, lockdep_is_held(&h->pg_lock)); + rcu_assign_pointer(h->pg, NULL); + spin_unlock(&h->pg_lock); + if (pg) { + spin_lock_irq(&pg->lock); + list_del_rcu(&h->node); + spin_unlock_irq(&pg->lock); + kref_put(&pg->kref, release_port_group); + } + sdev->handler_data = NULL; + synchronize_rcu(); + kfree(h); +} + +static struct scsi_device_handler alua_dh = { + .name = ALUA_DH_NAME, + .module = THIS_MODULE, + .attach = alua_bus_attach, + .detach = alua_bus_detach, + .prep_fn = alua_prep_fn, + .check_sense = alua_check_sense, + .activate = alua_activate, + .rescan = alua_rescan, + .set_params = alua_set_params, +}; + +static int __init alua_init(void) +{ + int r; + + kaluad_wq = alloc_workqueue("kaluad", WQ_MEM_RECLAIM, 0); + if (!kaluad_wq) + return -ENOMEM; + + r = scsi_register_device_handler(&alua_dh); + if (r != 0) { + printk(KERN_ERR "%s: Failed to register scsi device handler", + ALUA_DH_NAME); + destroy_workqueue(kaluad_wq); + } + return r; +} + +static void __exit alua_exit(void) +{ + scsi_unregister_device_handler(&alua_dh); + destroy_workqueue(kaluad_wq); +} + +module_init(alua_init); +module_exit(alua_exit); + +MODULE_DESCRIPTION("DM Multipath ALUA support"); +MODULE_AUTHOR("Hannes Reinecke "); +MODULE_LICENSE("GPL"); +MODULE_VERSION(ALUA_DH_VER); -- cgit v1.2.3