From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/ssb/driver_pcicore.c | 742 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 742 insertions(+) create mode 100644 drivers/ssb/driver_pcicore.c (limited to 'drivers/ssb/driver_pcicore.c') diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c new file mode 100644 index 000000000..d11b4242b --- /dev/null +++ b/drivers/ssb/driver_pcicore.c @@ -0,0 +1,742 @@ +/* + * Sonics Silicon Backplane + * Broadcom PCI-core driver + * + * Copyright 2005, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "ssb_private.h" + +#include +#include +#include +#include +#include + +static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address); +static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data); +static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address); +static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, + u8 address, u16 data); + +static inline +u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset) +{ + return ssb_read32(pc->dev, offset); +} + +static inline +void pcicore_write32(struct ssb_pcicore *pc, u16 offset, u32 value) +{ + ssb_write32(pc->dev, offset, value); +} + +static inline +u16 pcicore_read16(struct ssb_pcicore *pc, u16 offset) +{ + return ssb_read16(pc->dev, offset); +} + +static inline +void pcicore_write16(struct ssb_pcicore *pc, u16 offset, u16 value) +{ + ssb_write16(pc->dev, offset, value); +} + +/************************************************** + * Code for hostmode operation. + **************************************************/ + +#ifdef CONFIG_SSB_PCICORE_HOSTMODE + +#include +/* Probe a 32bit value on the bus and catch bus exceptions. + * Returns nonzero on a bus exception. + * This is MIPS specific + */ +#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) + +/* Assume one-hot slot wiring */ +#define SSB_PCI_SLOT_MAX 16 + +/* Global lock is OK, as we won't have more than one extpci anyway. */ +static DEFINE_SPINLOCK(cfgspace_lock); +/* Core to access the external PCI config space. Can only have one. */ +static struct ssb_pcicore *extpci_core; + + +static u32 get_cfgspace_addr(struct ssb_pcicore *pc, + unsigned int bus, unsigned int dev, + unsigned int func, unsigned int off) +{ + u32 addr = 0; + u32 tmp; + + /* We do only have one cardbus device behind the bridge. */ + if (pc->cardbusmode && (dev > 1)) + goto out; + + if (bus == 0) { + /* Type 0 transaction */ + if (unlikely(dev >= SSB_PCI_SLOT_MAX)) + goto out; + /* Slide the window */ + tmp = SSB_PCICORE_SBTOPCI_CFG0; + tmp |= ((1 << (dev + 16)) & SSB_PCICORE_SBTOPCI1_MASK); + pcicore_write32(pc, SSB_PCICORE_SBTOPCI1, tmp); + /* Calculate the address */ + addr = SSB_PCI_CFG; + addr |= ((1 << (dev + 16)) & ~SSB_PCICORE_SBTOPCI1_MASK); + addr |= (func << 8); + addr |= (off & ~3); + } else { + /* Type 1 transaction */ + pcicore_write32(pc, SSB_PCICORE_SBTOPCI1, + SSB_PCICORE_SBTOPCI_CFG1); + /* Calculate the address */ + addr = SSB_PCI_CFG; + addr |= (bus << 16); + addr |= (dev << 11); + addr |= (func << 8); + addr |= (off & ~3); + } +out: + return addr; +} + +static int ssb_extpci_read_config(struct ssb_pcicore *pc, + unsigned int bus, unsigned int dev, + unsigned int func, unsigned int off, + void *buf, int len) +{ + int err = -EINVAL; + u32 addr, val; + void __iomem *mmio; + + WARN_ON(!pc->hostmode); + if (unlikely(len != 1 && len != 2 && len != 4)) + goto out; + addr = get_cfgspace_addr(pc, bus, dev, func, off); + if (unlikely(!addr)) + goto out; + err = -ENOMEM; + mmio = ioremap(addr, len); + if (!mmio) + goto out; + + if (mips_busprobe32(val, mmio)) { + val = 0xffffffff; + goto unmap; + } + + val = readl(mmio); + val >>= (8 * (off & 3)); + + switch (len) { + case 1: + *((u8 *)buf) = (u8)val; + break; + case 2: + *((u16 *)buf) = (u16)val; + break; + case 4: + *((u32 *)buf) = (u32)val; + break; + } + err = 0; +unmap: + iounmap(mmio); +out: + return err; +} + +static int ssb_extpci_write_config(struct ssb_pcicore *pc, + unsigned int bus, unsigned int dev, + unsigned int func, unsigned int off, + const void *buf, int len) +{ + int err = -EINVAL; + u32 addr, val = 0; + void __iomem *mmio; + + WARN_ON(!pc->hostmode); + if (unlikely(len != 1 && len != 2 && len != 4)) + goto out; + addr = get_cfgspace_addr(pc, bus, dev, func, off); + if (unlikely(!addr)) + goto out; + err = -ENOMEM; + mmio = ioremap(addr, len); + if (!mmio) + goto out; + + if (mips_busprobe32(val, mmio)) { + val = 0xffffffff; + goto unmap; + } + + switch (len) { + case 1: + val = readl(mmio); + val &= ~(0xFF << (8 * (off & 3))); + val |= *((const u8 *)buf) << (8 * (off & 3)); + break; + case 2: + val = readl(mmio); + val &= ~(0xFFFF << (8 * (off & 3))); + val |= *((const u16 *)buf) << (8 * (off & 3)); + break; + case 4: + val = *((const u32 *)buf); + break; + } + writel(val, mmio); + + err = 0; +unmap: + iounmap(mmio); +out: + return err; +} + +static int ssb_pcicore_read_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 *val) +{ + unsigned long flags; + int err; + + spin_lock_irqsave(&cfgspace_lock, flags); + err = ssb_extpci_read_config(extpci_core, bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), reg, val, size); + spin_unlock_irqrestore(&cfgspace_lock, flags); + + return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int ssb_pcicore_write_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 val) +{ + unsigned long flags; + int err; + + spin_lock_irqsave(&cfgspace_lock, flags); + err = ssb_extpci_write_config(extpci_core, bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), reg, &val, size); + spin_unlock_irqrestore(&cfgspace_lock, flags); + + return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops ssb_pcicore_pciops = { + .read = ssb_pcicore_read_config, + .write = ssb_pcicore_write_config, +}; + +static struct resource ssb_pcicore_mem_resource = { + .name = "SSB PCIcore external memory", + .start = SSB_PCI_DMA, + .end = SSB_PCI_DMA + SSB_PCI_DMA_SZ - 1, + .flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED, +}; + +static struct resource ssb_pcicore_io_resource = { + .name = "SSB PCIcore external I/O", + .start = 0x100, + .end = 0x7FF, + .flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED, +}; + +static struct pci_controller ssb_pcicore_controller = { + .pci_ops = &ssb_pcicore_pciops, + .io_resource = &ssb_pcicore_io_resource, + .mem_resource = &ssb_pcicore_mem_resource, +}; + +/* This function is called when doing a pci_enable_device(). + * We must first check if the device is a device on the PCI-core bridge. + */ +int ssb_pcicore_plat_dev_init(struct pci_dev *d) +{ + if (d->bus->ops != &ssb_pcicore_pciops) { + /* This is not a device on the PCI-core bridge. */ + return -ENODEV; + } + + dev_info(&d->dev, "PCI: Fixing up device %s\n", pci_name(d)); + + /* Fix up interrupt lines */ + d->irq = ssb_mips_irq(extpci_core->dev) + 2; + pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); + + return 0; +} + +/* Early PCI fixup for a device on the PCI-core bridge. */ +static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev) +{ + u8 lat; + + if (dev->bus->ops != &ssb_pcicore_pciops) { + /* This is not a device on the PCI-core bridge. */ + return; + } + if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0) + return; + + dev_info(&dev->dev, "PCI: Fixing up bridge %s\n", pci_name(dev)); + + /* Enable PCI bridge bus mastering and memory space */ + pci_set_master(dev); + if (pcibios_enable_device(dev, ~0) < 0) { + dev_err(&dev->dev, "PCI: SSB bridge enable failed\n"); + return; + } + + /* Enable PCI bridge BAR1 prefetch and burst */ + pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3); + + /* Make sure our latency is high enough to handle the devices behind us */ + lat = 168; + dev_info(&dev->dev, + "PCI: Fixing latency timer of device %s to %u\n", + pci_name(dev), lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} +DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge); + +/* PCI device IRQ mapping. */ +int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (dev->bus->ops != &ssb_pcicore_pciops) { + /* This is not a device on the PCI-core bridge. */ + return -ENODEV; + } + return ssb_mips_irq(extpci_core->dev) + 2; +} + +static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) +{ + u32 val; + + if (WARN_ON(extpci_core)) + return; + extpci_core = pc; + + dev_dbg(pc->dev->dev, "PCIcore in host mode found\n"); + /* Reset devices on the external PCI bus */ + val = SSB_PCICORE_CTL_RST_OE; + val |= SSB_PCICORE_CTL_CLK_OE; + pcicore_write32(pc, SSB_PCICORE_CTL, val); + val |= SSB_PCICORE_CTL_CLK; /* Clock on */ + pcicore_write32(pc, SSB_PCICORE_CTL, val); + udelay(150); /* Assertion time demanded by the PCI standard */ + val |= SSB_PCICORE_CTL_RST; /* Deassert RST# */ + pcicore_write32(pc, SSB_PCICORE_CTL, val); + val = SSB_PCICORE_ARBCTL_INTERN; + pcicore_write32(pc, SSB_PCICORE_ARBCTL, val); + udelay(1); /* Assertion time demanded by the PCI standard */ + + if (pc->dev->bus->has_cardbus_slot) { + dev_dbg(pc->dev->dev, "CardBus slot detected\n"); + pc->cardbusmode = 1; + /* GPIO 1 resets the bridge */ + ssb_gpio_out(pc->dev->bus, 1, 1); + ssb_gpio_outen(pc->dev->bus, 1, 1); + pcicore_write16(pc, SSB_PCICORE_SPROM(0), + pcicore_read16(pc, SSB_PCICORE_SPROM(0)) + | 0x0400); + } + + /* 64MB I/O window */ + pcicore_write32(pc, SSB_PCICORE_SBTOPCI0, + SSB_PCICORE_SBTOPCI_IO); + /* 64MB config space */ + pcicore_write32(pc, SSB_PCICORE_SBTOPCI1, + SSB_PCICORE_SBTOPCI_CFG0); + /* 1GB memory window */ + pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, + SSB_PCICORE_SBTOPCI_MEM | SSB_PCI_DMA); + + /* + * Accessing PCI config without a proper delay after devices reset (not + * GPIO reset) was causing reboots on WRT300N v1.0 (BCM4704). + * Tested delay 850 us lowered reboot chance to 50-80%, 1000 us fixed it + * completely. Flushing all writes was also tested but with no luck. + * The same problem was reported for WRT350N v1 (BCM4705), so we just + * sleep here unconditionally. + */ + usleep_range(1000, 2000); + + /* Enable PCI bridge BAR0 prefetch and burst */ + val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + ssb_extpci_write_config(pc, 0, 0, 0, PCI_COMMAND, &val, 2); + /* Clear error conditions */ + val = 0; + ssb_extpci_write_config(pc, 0, 0, 0, PCI_STATUS, &val, 2); + + /* Enable PCI interrupts */ + pcicore_write32(pc, SSB_PCICORE_IMASK, + SSB_PCICORE_IMASK_INTA); + + /* Ok, ready to run, register it to the system. + * The following needs change, if we want to port hostmode + * to non-MIPS platform. + */ + ssb_pcicore_controller.io_map_base = (unsigned long)ioremap(SSB_PCI_MEM, 0x04000000); + set_io_port_base(ssb_pcicore_controller.io_map_base); + /* Give some time to the PCI controller to configure itself with the new + * values. Not waiting at this point causes crashes of the machine. + */ + mdelay(10); + register_pci_controller(&ssb_pcicore_controller); +} + +static int pcicore_is_in_hostmode(struct ssb_pcicore *pc) +{ + struct ssb_bus *bus = pc->dev->bus; + u16 chipid_top; + u32 tmp; + + chipid_top = (bus->chip_id & 0xFF00); + if (chipid_top != 0x4700 && + chipid_top != 0x5300) + return 0; + + if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI) + return 0; + + /* The 200-pin BCM4712 package does not bond out PCI. Even when + * PCI is bonded out, some boards may leave the pins floating. + */ + if (bus->chip_id == 0x4712) { + if (bus->chip_package == SSB_CHIPPACK_BCM4712S) + return 0; + if (bus->chip_package == SSB_CHIPPACK_BCM4712M) + return 0; + } + if (bus->chip_id == 0x5350) + return 0; + + return !mips_busprobe32(tmp, (bus->mmio + (pc->dev->core_index * SSB_CORE_SIZE))); +} +#endif /* CONFIG_SSB_PCICORE_HOSTMODE */ + +/************************************************** + * Workarounds. + **************************************************/ + +static void ssb_pcicore_fix_sprom_core_index(struct ssb_pcicore *pc) +{ + u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0)); + if (((tmp & 0xF000) >> 12) != pc->dev->core_index) { + tmp &= ~0xF000; + tmp |= (pc->dev->core_index << 12); + pcicore_write16(pc, SSB_PCICORE_SPROM(0), tmp); + } +} + +static u8 ssb_pcicore_polarity_workaround(struct ssb_pcicore *pc) +{ + return (ssb_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; +} + +static void ssb_pcicore_serdes_workaround(struct ssb_pcicore *pc) +{ + const u8 serdes_pll_device = 0x1D; + const u8 serdes_rx_device = 0x1F; + u16 tmp; + + ssb_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, + ssb_pcicore_polarity_workaround(pc)); + tmp = ssb_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); + if (tmp & 0x4000) + ssb_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); +} + +static void ssb_pcicore_pci_setup_workarounds(struct ssb_pcicore *pc) +{ + struct ssb_device *pdev = pc->dev; + struct ssb_bus *bus = pdev->bus; + u32 tmp; + + tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); + tmp |= SSB_PCICORE_SBTOPCI_PREF; + tmp |= SSB_PCICORE_SBTOPCI_BURST; + pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); + + if (pdev->id.revision < 5) { + tmp = ssb_read32(pdev, SSB_IMCFGLO); + tmp &= ~SSB_IMCFGLO_SERTO; + tmp |= 2; + tmp &= ~SSB_IMCFGLO_REQTO; + tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT; + ssb_write32(pdev, SSB_IMCFGLO, tmp); + ssb_commit_settings(bus); + } else if (pdev->id.revision >= 11) { + tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); + tmp |= SSB_PCICORE_SBTOPCI_MRM; + pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); + } +} + +static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc) +{ + u32 tmp; + u8 rev = pc->dev->id.revision; + + if (rev == 0 || rev == 1) { + /* TLP Workaround register. */ + tmp = ssb_pcie_read(pc, 0x4); + tmp |= 0x8; + ssb_pcie_write(pc, 0x4, tmp); + } + if (rev == 1) { + /* DLLP Link Control register. */ + tmp = ssb_pcie_read(pc, 0x100); + tmp |= 0x40; + ssb_pcie_write(pc, 0x100, tmp); + } + + if (rev == 0) { + const u8 serdes_rx_device = 0x1F; + + ssb_pcie_mdio_write(pc, serdes_rx_device, + 2 /* Timer */, 0x8128); + ssb_pcie_mdio_write(pc, serdes_rx_device, + 6 /* CDR */, 0x0100); + ssb_pcie_mdio_write(pc, serdes_rx_device, + 7 /* CDR BW */, 0x1466); + } else if (rev == 3 || rev == 4 || rev == 5) { + /* TODO: DLLP Power Management Threshold */ + ssb_pcicore_serdes_workaround(pc); + /* TODO: ASPM */ + } else if (rev == 7) { + /* TODO: No PLL down */ + } + + if (rev >= 6) { + /* Miscellaneous Configuration Fixup */ + tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(5)); + if (!(tmp & 0x8000)) + pcicore_write16(pc, SSB_PCICORE_SPROM(5), + tmp | 0x8000); + } +} + +/************************************************** + * Generic and Clientmode operation code. + **************************************************/ + +static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) +{ + struct ssb_device *pdev = pc->dev; + struct ssb_bus *bus = pdev->bus; + + if (bus->bustype == SSB_BUSTYPE_PCI) + ssb_pcicore_fix_sprom_core_index(pc); + + /* Disable PCI interrupts. */ + ssb_write32(pdev, SSB_INTVEC, 0); + + /* Additional PCIe always once-executed workarounds */ + if (pc->dev->id.coreid == SSB_DEV_PCIE) { + ssb_pcicore_serdes_workaround(pc); + /* TODO: ASPM */ + /* TODO: Clock Request Update */ + } +} + +void ssb_pcicore_init(struct ssb_pcicore *pc) +{ + struct ssb_device *dev = pc->dev; + + if (!dev) + return; + if (!ssb_device_is_enabled(dev)) + ssb_device_enable(dev, 0); + +#ifdef CONFIG_SSB_PCICORE_HOSTMODE + pc->hostmode = pcicore_is_in_hostmode(pc); + if (pc->hostmode) + ssb_pcicore_init_hostmode(pc); +#endif /* CONFIG_SSB_PCICORE_HOSTMODE */ + if (!pc->hostmode) + ssb_pcicore_init_clientmode(pc); +} + +static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address) +{ + pcicore_write32(pc, 0x130, address); + return pcicore_read32(pc, 0x134); +} + +static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data) +{ + pcicore_write32(pc, 0x130, address); + pcicore_write32(pc, 0x134, data); +} + +static void ssb_pcie_mdio_set_phy(struct ssb_pcicore *pc, u8 phy) +{ + const u16 mdio_control = 0x128; + const u16 mdio_data = 0x12C; + u32 v; + int i; + + v = (1 << 30); /* Start of Transaction */ + v |= (1 << 28); /* Write Transaction */ + v |= (1 << 17); /* Turnaround */ + v |= (0x1F << 18); + v |= (phy << 4); + pcicore_write32(pc, mdio_data, v); + + udelay(10); + for (i = 0; i < 200; i++) { + v = pcicore_read32(pc, mdio_control); + if (v & 0x100 /* Trans complete */) + break; + msleep(1); + } +} + +static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address) +{ + const u16 mdio_control = 0x128; + const u16 mdio_data = 0x12C; + int max_retries = 10; + u16 ret = 0; + u32 v; + int i; + + v = 0x80; /* Enable Preamble Sequence */ + v |= 0x2; /* MDIO Clock Divisor */ + pcicore_write32(pc, mdio_control, v); + + if (pc->dev->id.revision >= 10) { + max_retries = 200; + ssb_pcie_mdio_set_phy(pc, device); + } + + v = (1 << 30); /* Start of Transaction */ + v |= (1 << 29); /* Read Transaction */ + v |= (1 << 17); /* Turnaround */ + if (pc->dev->id.revision < 10) + v |= (u32)device << 22; + v |= (u32)address << 18; + pcicore_write32(pc, mdio_data, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { + v = pcicore_read32(pc, mdio_control); + if (v & 0x100 /* Trans complete */) { + udelay(10); + ret = pcicore_read32(pc, mdio_data); + break; + } + msleep(1); + } + pcicore_write32(pc, mdio_control, 0); + return ret; +} + +static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, + u8 address, u16 data) +{ + const u16 mdio_control = 0x128; + const u16 mdio_data = 0x12C; + int max_retries = 10; + u32 v; + int i; + + v = 0x80; /* Enable Preamble Sequence */ + v |= 0x2; /* MDIO Clock Divisor */ + pcicore_write32(pc, mdio_control, v); + + if (pc->dev->id.revision >= 10) { + max_retries = 200; + ssb_pcie_mdio_set_phy(pc, device); + } + + v = (1 << 30); /* Start of Transaction */ + v |= (1 << 28); /* Write Transaction */ + v |= (1 << 17); /* Turnaround */ + if (pc->dev->id.revision < 10) + v |= (u32)device << 22; + v |= (u32)address << 18; + v |= data; + pcicore_write32(pc, mdio_data, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { + v = pcicore_read32(pc, mdio_control); + if (v & 0x100 /* Trans complete */) + break; + msleep(1); + } + pcicore_write32(pc, mdio_control, 0); +} + +int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, + struct ssb_device *dev) +{ + struct ssb_device *pdev = pc->dev; + struct ssb_bus *bus; + int err = 0; + u32 tmp; + + if (dev->bus->bustype != SSB_BUSTYPE_PCI) { + /* This SSB device is not on a PCI host-bus. So the IRQs are + * not routed through the PCI core. + * So we must not enable routing through the PCI core. + */ + goto out; + } + + if (!pdev) + goto out; + bus = pdev->bus; + + might_sleep_if(pdev->id.coreid != SSB_DEV_PCI); + + /* Enable interrupts for this device. */ + if ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE)) { + u32 coremask; + + /* Calculate the "coremask" for the device. */ + coremask = (1 << dev->core_index); + + WARN_ON(bus->bustype != SSB_BUSTYPE_PCI); + err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp); + if (err) + goto out; + tmp |= coremask << 8; + err = pci_write_config_dword(bus->host_pci, SSB_PCI_IRQMASK, tmp); + if (err) + goto out; + } else { + u32 intvec; + + intvec = ssb_read32(pdev, SSB_INTVEC); + tmp = ssb_read32(dev, SSB_TPSFLAG); + tmp &= SSB_TPSFLAG_BPFLAG; + intvec |= (1 << tmp); + ssb_write32(pdev, SSB_INTVEC, intvec); + } + + /* Setup PCIcore operation. */ + if (pc->setup_done) + goto out; + if (pdev->id.coreid == SSB_DEV_PCI) { + ssb_pcicore_pci_setup_workarounds(pc); + } else { + WARN_ON(pdev->id.coreid != SSB_DEV_PCIE); + ssb_pcicore_pcie_setup_workarounds(pc); + } + pc->setup_done = 1; +out: + return err; +} +EXPORT_SYMBOL(ssb_pcicore_dev_irqvecs_enable); -- cgit v1.2.3