From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/thermal/intel/therm_throt.c | 752 ++++++++++++++++++++++++++++++++++++ 1 file changed, 752 insertions(+) create mode 100644 drivers/thermal/intel/therm_throt.c (limited to 'drivers/thermal/intel/therm_throt.c') diff --git a/drivers/thermal/intel/therm_throt.c b/drivers/thermal/intel/therm_throt.c new file mode 100644 index 000000000..8352083b8 --- /dev/null +++ b/drivers/thermal/intel/therm_throt.c @@ -0,0 +1,752 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Thermal throttle event support code (such as syslog messaging and rate + * limiting) that was factored out from x86_64 (mce_intel.c) and i386 (p4.c). + * + * This allows consistent reporting of CPU thermal throttle events. + * + * Maintains a counter in /sys that keeps track of the number of thermal + * events, such that the user knows how bad the thermal problem might be + * (since the logging to syslog is rate limited). + * + * Author: Dmitriy Zavin (dmitriyz@google.com) + * + * Credits: Adapted from Zwane Mwaikambo's original code in mce_intel.c. + * Inspired by Ross Biro's and Al Borchers' counter code. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "intel_hfi.h" +#include "thermal_interrupt.h" + +/* How long to wait between reporting thermal events */ +#define CHECK_INTERVAL (300 * HZ) + +#define THERMAL_THROTTLING_EVENT 0 +#define POWER_LIMIT_EVENT 1 + +/** + * struct _thermal_state - Represent the current thermal event state + * @next_check: Stores the next timestamp, when it is allowed + * to log the next warning message. + * @last_interrupt_time: Stores the timestamp for the last threshold + * high event. + * @therm_work: Delayed workqueue structure + * @count: Stores the current running count for thermal + * or power threshold interrupts. + * @last_count: Stores the previous running count for thermal + * or power threshold interrupts. + * @max_time_ms: This shows the maximum amount of time CPU was + * in throttled state for a single thermal + * threshold high to low state. + * @total_time_ms: This is a cumulative time during which CPU was + * in the throttled state. + * @rate_control_active: Set when a throttling message is logged. + * This is used for the purpose of rate-control. + * @new_event: Stores the last high/low status of the + * THERM_STATUS_PROCHOT or + * THERM_STATUS_POWER_LIMIT. + * @level: Stores whether this _thermal_state instance is + * for a CORE level or for PACKAGE level. + * @sample_index: Index for storing the next sample in the buffer + * temp_samples[]. + * @sample_count: Total number of samples collected in the buffer + * temp_samples[]. + * @average: The last moving average of temperature samples + * @baseline_temp: Temperature at which thermal threshold high + * interrupt was generated. + * @temp_samples: Storage for temperature samples to calculate + * moving average. + * + * This structure is used to represent data related to thermal state for a CPU. + * There is a separate storage for core and package level for each CPU. + */ +struct _thermal_state { + u64 next_check; + u64 last_interrupt_time; + struct delayed_work therm_work; + unsigned long count; + unsigned long last_count; + unsigned long max_time_ms; + unsigned long total_time_ms; + bool rate_control_active; + bool new_event; + u8 level; + u8 sample_index; + u8 sample_count; + u8 average; + u8 baseline_temp; + u8 temp_samples[3]; +}; + +struct thermal_state { + struct _thermal_state core_throttle; + struct _thermal_state core_power_limit; + struct _thermal_state package_throttle; + struct _thermal_state package_power_limit; + struct _thermal_state core_thresh0; + struct _thermal_state core_thresh1; + struct _thermal_state pkg_thresh0; + struct _thermal_state pkg_thresh1; +}; + +/* Callback to handle core threshold interrupts */ +int (*platform_thermal_notify)(__u64 msr_val); +EXPORT_SYMBOL(platform_thermal_notify); + +/* Callback to handle core package threshold_interrupts */ +int (*platform_thermal_package_notify)(__u64 msr_val); +EXPORT_SYMBOL_GPL(platform_thermal_package_notify); + +/* Callback support of rate control, return true, if + * callback has rate control */ +bool (*platform_thermal_package_rate_control)(void); +EXPORT_SYMBOL_GPL(platform_thermal_package_rate_control); + + +static DEFINE_PER_CPU(struct thermal_state, thermal_state); + +static atomic_t therm_throt_en = ATOMIC_INIT(0); + +static u32 lvtthmr_init __read_mostly; + +#ifdef CONFIG_SYSFS +#define define_therm_throt_device_one_ro(_name) \ + static DEVICE_ATTR(_name, 0444, \ + therm_throt_device_show_##_name, \ + NULL) \ + +#define define_therm_throt_device_show_func(event, name) \ + \ +static ssize_t therm_throt_device_show_##event##_##name( \ + struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + unsigned int cpu = dev->id; \ + ssize_t ret; \ + \ + preempt_disable(); /* CPU hotplug */ \ + if (cpu_online(cpu)) { \ + ret = sprintf(buf, "%lu\n", \ + per_cpu(thermal_state, cpu).event.name); \ + } else \ + ret = 0; \ + preempt_enable(); \ + \ + return ret; \ +} + +define_therm_throt_device_show_func(core_throttle, count); +define_therm_throt_device_one_ro(core_throttle_count); + +define_therm_throt_device_show_func(core_power_limit, count); +define_therm_throt_device_one_ro(core_power_limit_count); + +define_therm_throt_device_show_func(package_throttle, count); +define_therm_throt_device_one_ro(package_throttle_count); + +define_therm_throt_device_show_func(package_power_limit, count); +define_therm_throt_device_one_ro(package_power_limit_count); + +define_therm_throt_device_show_func(core_throttle, max_time_ms); +define_therm_throt_device_one_ro(core_throttle_max_time_ms); + +define_therm_throt_device_show_func(package_throttle, max_time_ms); +define_therm_throt_device_one_ro(package_throttle_max_time_ms); + +define_therm_throt_device_show_func(core_throttle, total_time_ms); +define_therm_throt_device_one_ro(core_throttle_total_time_ms); + +define_therm_throt_device_show_func(package_throttle, total_time_ms); +define_therm_throt_device_one_ro(package_throttle_total_time_ms); + +static struct attribute *thermal_throttle_attrs[] = { + &dev_attr_core_throttle_count.attr, + &dev_attr_core_throttle_max_time_ms.attr, + &dev_attr_core_throttle_total_time_ms.attr, + NULL +}; + +static const struct attribute_group thermal_attr_group = { + .attrs = thermal_throttle_attrs, + .name = "thermal_throttle" +}; +#endif /* CONFIG_SYSFS */ + +#define CORE_LEVEL 0 +#define PACKAGE_LEVEL 1 + +#define THERM_THROT_POLL_INTERVAL HZ +#define THERM_STATUS_PROCHOT_LOG BIT(1) + +#define THERM_STATUS_CLEAR_CORE_MASK (BIT(1) | BIT(3) | BIT(5) | BIT(7) | BIT(9) | BIT(11) | BIT(13) | BIT(15)) +#define THERM_STATUS_CLEAR_PKG_MASK (BIT(1) | BIT(3) | BIT(5) | BIT(7) | BIT(9) | BIT(11)) + +static void clear_therm_status_log(int level) +{ + int msr; + u64 mask, msr_val; + + if (level == CORE_LEVEL) { + msr = MSR_IA32_THERM_STATUS; + mask = THERM_STATUS_CLEAR_CORE_MASK; + } else { + msr = MSR_IA32_PACKAGE_THERM_STATUS; + mask = THERM_STATUS_CLEAR_PKG_MASK; + } + + rdmsrl(msr, msr_val); + msr_val &= mask; + wrmsrl(msr, msr_val & ~THERM_STATUS_PROCHOT_LOG); +} + +static void get_therm_status(int level, bool *proc_hot, u8 *temp) +{ + int msr; + u64 msr_val; + + if (level == CORE_LEVEL) + msr = MSR_IA32_THERM_STATUS; + else + msr = MSR_IA32_PACKAGE_THERM_STATUS; + + rdmsrl(msr, msr_val); + if (msr_val & THERM_STATUS_PROCHOT_LOG) + *proc_hot = true; + else + *proc_hot = false; + + *temp = (msr_val >> 16) & 0x7F; +} + +static void __maybe_unused throttle_active_work(struct work_struct *work) +{ + struct _thermal_state *state = container_of(to_delayed_work(work), + struct _thermal_state, therm_work); + unsigned int i, avg, this_cpu = smp_processor_id(); + u64 now = get_jiffies_64(); + bool hot; + u8 temp; + + get_therm_status(state->level, &hot, &temp); + /* temperature value is offset from the max so lesser means hotter */ + if (!hot && temp > state->baseline_temp) { + if (state->rate_control_active) + pr_info("CPU%d: %s temperature/speed normal (total events = %lu)\n", + this_cpu, + state->level == CORE_LEVEL ? "Core" : "Package", + state->count); + + state->rate_control_active = false; + return; + } + + if (time_before64(now, state->next_check) && + state->rate_control_active) + goto re_arm; + + state->next_check = now + CHECK_INTERVAL; + + if (state->count != state->last_count) { + /* There was one new thermal interrupt */ + state->last_count = state->count; + state->average = 0; + state->sample_count = 0; + state->sample_index = 0; + } + + state->temp_samples[state->sample_index] = temp; + state->sample_count++; + state->sample_index = (state->sample_index + 1) % ARRAY_SIZE(state->temp_samples); + if (state->sample_count < ARRAY_SIZE(state->temp_samples)) + goto re_arm; + + avg = 0; + for (i = 0; i < ARRAY_SIZE(state->temp_samples); ++i) + avg += state->temp_samples[i]; + + avg /= ARRAY_SIZE(state->temp_samples); + + if (state->average > avg) { + pr_warn("CPU%d: %s temperature is above threshold, cpu clock is throttled (total events = %lu)\n", + this_cpu, + state->level == CORE_LEVEL ? "Core" : "Package", + state->count); + state->rate_control_active = true; + } + + state->average = avg; + +re_arm: + clear_therm_status_log(state->level); + schedule_delayed_work_on(this_cpu, &state->therm_work, THERM_THROT_POLL_INTERVAL); +} + +/*** + * therm_throt_process - Process thermal throttling event from interrupt + * @curr: Whether the condition is current or not (boolean), since the + * thermal interrupt normally gets called both when the thermal + * event begins and once the event has ended. + * + * This function is called by the thermal interrupt after the + * IRQ has been acknowledged. + * + * It will take care of rate limiting and printing messages to the syslog. + */ +static void therm_throt_process(bool new_event, int event, int level) +{ + struct _thermal_state *state; + unsigned int this_cpu = smp_processor_id(); + bool old_event; + u64 now; + struct thermal_state *pstate = &per_cpu(thermal_state, this_cpu); + + now = get_jiffies_64(); + if (level == CORE_LEVEL) { + if (event == THERMAL_THROTTLING_EVENT) + state = &pstate->core_throttle; + else if (event == POWER_LIMIT_EVENT) + state = &pstate->core_power_limit; + else + return; + } else if (level == PACKAGE_LEVEL) { + if (event == THERMAL_THROTTLING_EVENT) + state = &pstate->package_throttle; + else if (event == POWER_LIMIT_EVENT) + state = &pstate->package_power_limit; + else + return; + } else + return; + + old_event = state->new_event; + state->new_event = new_event; + + if (new_event) + state->count++; + + if (event != THERMAL_THROTTLING_EVENT) + return; + + if (new_event && !state->last_interrupt_time) { + bool hot; + u8 temp; + + get_therm_status(state->level, &hot, &temp); + /* + * Ignore short temperature spike as the system is not close + * to PROCHOT. 10C offset is large enough to ignore. It is + * already dropped from the high threshold temperature. + */ + if (temp > 10) + return; + + state->baseline_temp = temp; + state->last_interrupt_time = now; + schedule_delayed_work_on(this_cpu, &state->therm_work, THERM_THROT_POLL_INTERVAL); + } else if (old_event && state->last_interrupt_time) { + unsigned long throttle_time; + + throttle_time = jiffies_delta_to_msecs(now - state->last_interrupt_time); + if (throttle_time > state->max_time_ms) + state->max_time_ms = throttle_time; + state->total_time_ms += throttle_time; + state->last_interrupt_time = 0; + } +} + +static int thresh_event_valid(int level, int event) +{ + struct _thermal_state *state; + unsigned int this_cpu = smp_processor_id(); + struct thermal_state *pstate = &per_cpu(thermal_state, this_cpu); + u64 now = get_jiffies_64(); + + if (level == PACKAGE_LEVEL) + state = (event == 0) ? &pstate->pkg_thresh0 : + &pstate->pkg_thresh1; + else + state = (event == 0) ? &pstate->core_thresh0 : + &pstate->core_thresh1; + + if (time_before64(now, state->next_check)) + return 0; + + state->next_check = now + CHECK_INTERVAL; + + return 1; +} + +static bool int_pln_enable; +static int __init int_pln_enable_setup(char *s) +{ + int_pln_enable = true; + + return 1; +} +__setup("int_pln_enable", int_pln_enable_setup); + +#ifdef CONFIG_SYSFS +/* Add/Remove thermal_throttle interface for CPU device: */ +static int thermal_throttle_add_dev(struct device *dev, unsigned int cpu) +{ + int err; + struct cpuinfo_x86 *c = &cpu_data(cpu); + + err = sysfs_create_group(&dev->kobj, &thermal_attr_group); + if (err) + return err; + + if (cpu_has(c, X86_FEATURE_PLN) && int_pln_enable) { + err = sysfs_add_file_to_group(&dev->kobj, + &dev_attr_core_power_limit_count.attr, + thermal_attr_group.name); + if (err) + goto del_group; + } + + if (cpu_has(c, X86_FEATURE_PTS)) { + err = sysfs_add_file_to_group(&dev->kobj, + &dev_attr_package_throttle_count.attr, + thermal_attr_group.name); + if (err) + goto del_group; + + err = sysfs_add_file_to_group(&dev->kobj, + &dev_attr_package_throttle_max_time_ms.attr, + thermal_attr_group.name); + if (err) + goto del_group; + + err = sysfs_add_file_to_group(&dev->kobj, + &dev_attr_package_throttle_total_time_ms.attr, + thermal_attr_group.name); + if (err) + goto del_group; + + if (cpu_has(c, X86_FEATURE_PLN) && int_pln_enable) { + err = sysfs_add_file_to_group(&dev->kobj, + &dev_attr_package_power_limit_count.attr, + thermal_attr_group.name); + if (err) + goto del_group; + } + } + + return 0; + +del_group: + sysfs_remove_group(&dev->kobj, &thermal_attr_group); + + return err; +} + +static void thermal_throttle_remove_dev(struct device *dev) +{ + sysfs_remove_group(&dev->kobj, &thermal_attr_group); +} + +/* Get notified when a cpu comes on/off. Be hotplug friendly. */ +static int thermal_throttle_online(unsigned int cpu) +{ + struct thermal_state *state = &per_cpu(thermal_state, cpu); + struct device *dev = get_cpu_device(cpu); + u32 l; + + state->package_throttle.level = PACKAGE_LEVEL; + state->core_throttle.level = CORE_LEVEL; + + INIT_DELAYED_WORK(&state->package_throttle.therm_work, throttle_active_work); + INIT_DELAYED_WORK(&state->core_throttle.therm_work, throttle_active_work); + + /* + * The first CPU coming online will enable the HFI. Usually this causes + * hardware to issue an HFI thermal interrupt. Such interrupt will reach + * the CPU once we enable the thermal vector in the local APIC. + */ + intel_hfi_online(cpu); + + /* Unmask the thermal vector after the above workqueues are initialized. */ + l = apic_read(APIC_LVTTHMR); + apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED); + + return thermal_throttle_add_dev(dev, cpu); +} + +static int thermal_throttle_offline(unsigned int cpu) +{ + struct thermal_state *state = &per_cpu(thermal_state, cpu); + struct device *dev = get_cpu_device(cpu); + u32 l; + + /* Mask the thermal vector before draining evtl. pending work */ + l = apic_read(APIC_LVTTHMR); + apic_write(APIC_LVTTHMR, l | APIC_LVT_MASKED); + + intel_hfi_offline(cpu); + + cancel_delayed_work_sync(&state->package_throttle.therm_work); + cancel_delayed_work_sync(&state->core_throttle.therm_work); + + state->package_throttle.rate_control_active = false; + state->core_throttle.rate_control_active = false; + + thermal_throttle_remove_dev(dev); + return 0; +} + +static __init int thermal_throttle_init_device(void) +{ + int ret; + + if (!atomic_read(&therm_throt_en)) + return 0; + + intel_hfi_init(); + + ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/therm:online", + thermal_throttle_online, + thermal_throttle_offline); + return ret < 0 ? ret : 0; +} +device_initcall(thermal_throttle_init_device); + +#endif /* CONFIG_SYSFS */ + +static void notify_package_thresholds(__u64 msr_val) +{ + bool notify_thres_0 = false; + bool notify_thres_1 = false; + + if (!platform_thermal_package_notify) + return; + + /* lower threshold check */ + if (msr_val & THERM_LOG_THRESHOLD0) + notify_thres_0 = true; + /* higher threshold check */ + if (msr_val & THERM_LOG_THRESHOLD1) + notify_thres_1 = true; + + if (!notify_thres_0 && !notify_thres_1) + return; + + if (platform_thermal_package_rate_control && + platform_thermal_package_rate_control()) { + /* Rate control is implemented in callback */ + platform_thermal_package_notify(msr_val); + return; + } + + /* lower threshold reached */ + if (notify_thres_0 && thresh_event_valid(PACKAGE_LEVEL, 0)) + platform_thermal_package_notify(msr_val); + /* higher threshold reached */ + if (notify_thres_1 && thresh_event_valid(PACKAGE_LEVEL, 1)) + platform_thermal_package_notify(msr_val); +} + +static void notify_thresholds(__u64 msr_val) +{ + /* check whether the interrupt handler is defined; + * otherwise simply return + */ + if (!platform_thermal_notify) + return; + + /* lower threshold reached */ + if ((msr_val & THERM_LOG_THRESHOLD0) && + thresh_event_valid(CORE_LEVEL, 0)) + platform_thermal_notify(msr_val); + /* higher threshold reached */ + if ((msr_val & THERM_LOG_THRESHOLD1) && + thresh_event_valid(CORE_LEVEL, 1)) + platform_thermal_notify(msr_val); +} + +void __weak notify_hwp_interrupt(void) +{ + wrmsrl_safe(MSR_HWP_STATUS, 0); +} + +/* Thermal transition interrupt handler */ +void intel_thermal_interrupt(void) +{ + __u64 msr_val; + + if (static_cpu_has(X86_FEATURE_HWP)) + notify_hwp_interrupt(); + + rdmsrl(MSR_IA32_THERM_STATUS, msr_val); + + /* Check for violation of core thermal thresholds*/ + notify_thresholds(msr_val); + + therm_throt_process(msr_val & THERM_STATUS_PROCHOT, + THERMAL_THROTTLING_EVENT, + CORE_LEVEL); + + if (this_cpu_has(X86_FEATURE_PLN) && int_pln_enable) + therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT, + POWER_LIMIT_EVENT, + CORE_LEVEL); + + if (this_cpu_has(X86_FEATURE_PTS)) { + rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val); + /* check violations of package thermal thresholds */ + notify_package_thresholds(msr_val); + therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT, + THERMAL_THROTTLING_EVENT, + PACKAGE_LEVEL); + if (this_cpu_has(X86_FEATURE_PLN) && int_pln_enable) + therm_throt_process(msr_val & + PACKAGE_THERM_STATUS_POWER_LIMIT, + POWER_LIMIT_EVENT, + PACKAGE_LEVEL); + + if (this_cpu_has(X86_FEATURE_HFI)) + intel_hfi_process_event(msr_val & + PACKAGE_THERM_STATUS_HFI_UPDATED); + } +} + +/* Thermal monitoring depends on APIC, ACPI and clock modulation */ +static int intel_thermal_supported(struct cpuinfo_x86 *c) +{ + if (!boot_cpu_has(X86_FEATURE_APIC)) + return 0; + if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC)) + return 0; + return 1; +} + +bool x86_thermal_enabled(void) +{ + return atomic_read(&therm_throt_en); +} + +void __init therm_lvt_init(void) +{ + /* + * This function is only called on boot CPU. Save the init thermal + * LVT value on BSP and use that value to restore APs' thermal LVT + * entry BIOS programmed later + */ + if (intel_thermal_supported(&boot_cpu_data)) + lvtthmr_init = apic_read(APIC_LVTTHMR); +} + +void intel_init_thermal(struct cpuinfo_x86 *c) +{ + unsigned int cpu = smp_processor_id(); + int tm2 = 0; + u32 l, h; + + if (!intel_thermal_supported(c)) + return; + + /* + * First check if its enabled already, in which case there might + * be some SMM goo which handles it, so we can't even put a handler + * since it might be delivered via SMI already: + */ + rdmsr(MSR_IA32_MISC_ENABLE, l, h); + + h = lvtthmr_init; + /* + * The initial value of thermal LVT entries on all APs always reads + * 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI + * sequence to them and LVT registers are reset to 0s except for + * the mask bits which are set to 1s when APs receive INIT IPI. + * If BIOS takes over the thermal interrupt and sets its interrupt + * delivery mode to SMI (not fixed), it restores the value that the + * BIOS has programmed on AP based on BSP's info we saved since BIOS + * is always setting the same value for all threads/cores. + */ + if ((h & APIC_DM_FIXED_MASK) != APIC_DM_FIXED) + apic_write(APIC_LVTTHMR, lvtthmr_init); + + + if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) { + if (system_state == SYSTEM_BOOTING) + pr_debug("CPU%d: Thermal monitoring handled by SMI\n", cpu); + return; + } + + /* early Pentium M models use different method for enabling TM2 */ + if (cpu_has(c, X86_FEATURE_TM2)) { + if (c->x86 == 6 && (c->x86_model == 9 || c->x86_model == 13)) { + rdmsr(MSR_THERM2_CTL, l, h); + if (l & MSR_THERM2_CTL_TM_SELECT) + tm2 = 1; + } else if (l & MSR_IA32_MISC_ENABLE_TM2) + tm2 = 1; + } + + /* We'll mask the thermal vector in the lapic till we're ready: */ + h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED; + apic_write(APIC_LVTTHMR, h); + + rdmsr(MSR_IA32_THERM_INTERRUPT, l, h); + if (cpu_has(c, X86_FEATURE_PLN) && !int_pln_enable) + wrmsr(MSR_IA32_THERM_INTERRUPT, + (l | (THERM_INT_LOW_ENABLE + | THERM_INT_HIGH_ENABLE)) & ~THERM_INT_PLN_ENABLE, h); + else if (cpu_has(c, X86_FEATURE_PLN) && int_pln_enable) + wrmsr(MSR_IA32_THERM_INTERRUPT, + l | (THERM_INT_LOW_ENABLE + | THERM_INT_HIGH_ENABLE | THERM_INT_PLN_ENABLE), h); + else + wrmsr(MSR_IA32_THERM_INTERRUPT, + l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h); + + if (cpu_has(c, X86_FEATURE_PTS)) { + rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h); + if (cpu_has(c, X86_FEATURE_PLN) && !int_pln_enable) + wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, + (l | (PACKAGE_THERM_INT_LOW_ENABLE + | PACKAGE_THERM_INT_HIGH_ENABLE)) + & ~PACKAGE_THERM_INT_PLN_ENABLE, h); + else if (cpu_has(c, X86_FEATURE_PLN) && int_pln_enable) + wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, + l | (PACKAGE_THERM_INT_LOW_ENABLE + | PACKAGE_THERM_INT_HIGH_ENABLE + | PACKAGE_THERM_INT_PLN_ENABLE), h); + else + wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, + l | (PACKAGE_THERM_INT_LOW_ENABLE + | PACKAGE_THERM_INT_HIGH_ENABLE), h); + + if (cpu_has(c, X86_FEATURE_HFI)) { + rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h); + wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, + l | PACKAGE_THERM_INT_HFI_ENABLE, h); + } + } + + rdmsr(MSR_IA32_MISC_ENABLE, l, h); + wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h); + + pr_info_once("CPU0: Thermal monitoring enabled (%s)\n", + tm2 ? "TM2" : "TM1"); + + /* enable thermal throttle processing */ + atomic_set(&therm_throt_en, 1); +} -- cgit v1.2.3