From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/ufs/core/ufshcd.c | 10085 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 10085 insertions(+) create mode 100644 drivers/ufs/core/ufshcd.c (limited to 'drivers/ufs/core/ufshcd.c') diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c new file mode 100644 index 000000000..9fd4e9ed9 --- /dev/null +++ b/drivers/ufs/core/ufshcd.c @@ -0,0 +1,10085 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Universal Flash Storage Host controller driver Core + * Copyright (C) 2011-2013 Samsung India Software Operations + * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. + * + * Authors: + * Santosh Yaraganavi + * Vinayak Holikatti + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ufshcd-priv.h" +#include +#include +#include "ufs-sysfs.h" +#include "ufs-debugfs.h" +#include "ufs-fault-injection.h" +#include "ufs_bsg.h" +#include "ufshcd-crypto.h" +#include "ufshpb.h" +#include + +#define CREATE_TRACE_POINTS +#include + +#define UFSHCD_ENABLE_INTRS (UTP_TRANSFER_REQ_COMPL |\ + UTP_TASK_REQ_COMPL |\ + UFSHCD_ERROR_MASK) +/* UIC command timeout, unit: ms */ +#define UIC_CMD_TIMEOUT 500 + +/* NOP OUT retries waiting for NOP IN response */ +#define NOP_OUT_RETRIES 10 +/* Timeout after 50 msecs if NOP OUT hangs without response */ +#define NOP_OUT_TIMEOUT 50 /* msecs */ + +/* Query request retries */ +#define QUERY_REQ_RETRIES 3 +/* Query request timeout */ +#define QUERY_REQ_TIMEOUT 1500 /* 1.5 seconds */ + +/* Task management command timeout */ +#define TM_CMD_TIMEOUT 100 /* msecs */ + +/* maximum number of retries for a general UIC command */ +#define UFS_UIC_COMMAND_RETRIES 3 + +/* maximum number of link-startup retries */ +#define DME_LINKSTARTUP_RETRIES 3 + +/* maximum number of reset retries before giving up */ +#define MAX_HOST_RESET_RETRIES 5 + +/* Maximum number of error handler retries before giving up */ +#define MAX_ERR_HANDLER_RETRIES 5 + +/* Expose the flag value from utp_upiu_query.value */ +#define MASK_QUERY_UPIU_FLAG_LOC 0xFF + +/* Interrupt aggregation default timeout, unit: 40us */ +#define INT_AGGR_DEF_TO 0x02 + +/* default delay of autosuspend: 2000 ms */ +#define RPM_AUTOSUSPEND_DELAY_MS 2000 + +/* Default delay of RPM device flush delayed work */ +#define RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS 5000 + +/* Default value of wait time before gating device ref clock */ +#define UFSHCD_REF_CLK_GATING_WAIT_US 0xFF /* microsecs */ + +/* Polling time to wait for fDeviceInit */ +#define FDEVICEINIT_COMPL_TIMEOUT 1500 /* millisecs */ + +#define ufshcd_toggle_vreg(_dev, _vreg, _on) \ + ({ \ + int _ret; \ + if (_on) \ + _ret = ufshcd_enable_vreg(_dev, _vreg); \ + else \ + _ret = ufshcd_disable_vreg(_dev, _vreg); \ + _ret; \ + }) + +#define ufshcd_hex_dump(prefix_str, buf, len) do { \ + size_t __len = (len); \ + print_hex_dump(KERN_ERR, prefix_str, \ + __len > 4 ? DUMP_PREFIX_OFFSET : DUMP_PREFIX_NONE,\ + 16, 4, buf, __len, false); \ +} while (0) + +int ufshcd_dump_regs(struct ufs_hba *hba, size_t offset, size_t len, + const char *prefix) +{ + u32 *regs; + size_t pos; + + if (offset % 4 != 0 || len % 4 != 0) /* keep readl happy */ + return -EINVAL; + + regs = kzalloc(len, GFP_ATOMIC); + if (!regs) + return -ENOMEM; + + for (pos = 0; pos < len; pos += 4) { + if (offset == 0 && + pos >= REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER && + pos <= REG_UIC_ERROR_CODE_DME) + continue; + regs[pos / 4] = ufshcd_readl(hba, offset + pos); + } + + ufshcd_hex_dump(prefix, regs, len); + kfree(regs); + + return 0; +} +EXPORT_SYMBOL_GPL(ufshcd_dump_regs); + +enum { + UFSHCD_MAX_CHANNEL = 0, + UFSHCD_MAX_ID = 1, + UFSHCD_NUM_RESERVED = 1, + UFSHCD_CMD_PER_LUN = 32 - UFSHCD_NUM_RESERVED, + UFSHCD_CAN_QUEUE = 32 - UFSHCD_NUM_RESERVED, +}; + +static const char *const ufshcd_state_name[] = { + [UFSHCD_STATE_RESET] = "reset", + [UFSHCD_STATE_OPERATIONAL] = "operational", + [UFSHCD_STATE_ERROR] = "error", + [UFSHCD_STATE_EH_SCHEDULED_FATAL] = "eh_fatal", + [UFSHCD_STATE_EH_SCHEDULED_NON_FATAL] = "eh_non_fatal", +}; + +/* UFSHCD error handling flags */ +enum { + UFSHCD_EH_IN_PROGRESS = (1 << 0), +}; + +/* UFSHCD UIC layer error flags */ +enum { + UFSHCD_UIC_DL_PA_INIT_ERROR = (1 << 0), /* Data link layer error */ + UFSHCD_UIC_DL_NAC_RECEIVED_ERROR = (1 << 1), /* Data link layer error */ + UFSHCD_UIC_DL_TCx_REPLAY_ERROR = (1 << 2), /* Data link layer error */ + UFSHCD_UIC_NL_ERROR = (1 << 3), /* Network layer error */ + UFSHCD_UIC_TL_ERROR = (1 << 4), /* Transport Layer error */ + UFSHCD_UIC_DME_ERROR = (1 << 5), /* DME error */ + UFSHCD_UIC_PA_GENERIC_ERROR = (1 << 6), /* Generic PA error */ +}; + +#define ufshcd_set_eh_in_progress(h) \ + ((h)->eh_flags |= UFSHCD_EH_IN_PROGRESS) +#define ufshcd_eh_in_progress(h) \ + ((h)->eh_flags & UFSHCD_EH_IN_PROGRESS) +#define ufshcd_clear_eh_in_progress(h) \ + ((h)->eh_flags &= ~UFSHCD_EH_IN_PROGRESS) + +const struct ufs_pm_lvl_states ufs_pm_lvl_states[] = { + [UFS_PM_LVL_0] = {UFS_ACTIVE_PWR_MODE, UIC_LINK_ACTIVE_STATE}, + [UFS_PM_LVL_1] = {UFS_ACTIVE_PWR_MODE, UIC_LINK_HIBERN8_STATE}, + [UFS_PM_LVL_2] = {UFS_SLEEP_PWR_MODE, UIC_LINK_ACTIVE_STATE}, + [UFS_PM_LVL_3] = {UFS_SLEEP_PWR_MODE, UIC_LINK_HIBERN8_STATE}, + [UFS_PM_LVL_4] = {UFS_POWERDOWN_PWR_MODE, UIC_LINK_HIBERN8_STATE}, + [UFS_PM_LVL_5] = {UFS_POWERDOWN_PWR_MODE, UIC_LINK_OFF_STATE}, + /* + * For DeepSleep, the link is first put in hibern8 and then off. + * Leaving the link in hibern8 is not supported. + */ + [UFS_PM_LVL_6] = {UFS_DEEPSLEEP_PWR_MODE, UIC_LINK_OFF_STATE}, +}; + +static inline enum ufs_dev_pwr_mode +ufs_get_pm_lvl_to_dev_pwr_mode(enum ufs_pm_level lvl) +{ + return ufs_pm_lvl_states[lvl].dev_state; +} + +static inline enum uic_link_state +ufs_get_pm_lvl_to_link_pwr_state(enum ufs_pm_level lvl) +{ + return ufs_pm_lvl_states[lvl].link_state; +} + +static inline enum ufs_pm_level +ufs_get_desired_pm_lvl_for_dev_link_state(enum ufs_dev_pwr_mode dev_state, + enum uic_link_state link_state) +{ + enum ufs_pm_level lvl; + + for (lvl = UFS_PM_LVL_0; lvl < UFS_PM_LVL_MAX; lvl++) { + if ((ufs_pm_lvl_states[lvl].dev_state == dev_state) && + (ufs_pm_lvl_states[lvl].link_state == link_state)) + return lvl; + } + + /* if no match found, return the level 0 */ + return UFS_PM_LVL_0; +} + +static const struct ufs_dev_quirk ufs_fixups[] = { + /* UFS cards deviations table */ + { .wmanufacturerid = UFS_VENDOR_MICRON, + .model = UFS_ANY_MODEL, + .quirk = UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM | + UFS_DEVICE_QUIRK_SWAP_L2P_ENTRY_FOR_HPB_READ }, + { .wmanufacturerid = UFS_VENDOR_SAMSUNG, + .model = UFS_ANY_MODEL, + .quirk = UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM | + UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE | + UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS }, + { .wmanufacturerid = UFS_VENDOR_SKHYNIX, + .model = UFS_ANY_MODEL, + .quirk = UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME }, + { .wmanufacturerid = UFS_VENDOR_SKHYNIX, + .model = "hB8aL1" /*H28U62301AMR*/, + .quirk = UFS_DEVICE_QUIRK_HOST_VS_DEBUGSAVECONFIGTIME }, + { .wmanufacturerid = UFS_VENDOR_TOSHIBA, + .model = UFS_ANY_MODEL, + .quirk = UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM }, + { .wmanufacturerid = UFS_VENDOR_TOSHIBA, + .model = "THGLF2G9C8KBADG", + .quirk = UFS_DEVICE_QUIRK_PA_TACTIVATE }, + { .wmanufacturerid = UFS_VENDOR_TOSHIBA, + .model = "THGLF2G9D8KBADG", + .quirk = UFS_DEVICE_QUIRK_PA_TACTIVATE }, + {} +}; + +static irqreturn_t ufshcd_tmc_handler(struct ufs_hba *hba); +static void ufshcd_async_scan(void *data, async_cookie_t cookie); +static int ufshcd_reset_and_restore(struct ufs_hba *hba); +static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd); +static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag); +static void ufshcd_hba_exit(struct ufs_hba *hba); +static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params); +static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on); +static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba); +static int ufshcd_host_reset_and_restore(struct ufs_hba *hba); +static void ufshcd_resume_clkscaling(struct ufs_hba *hba); +static void ufshcd_suspend_clkscaling(struct ufs_hba *hba); +static void __ufshcd_suspend_clkscaling(struct ufs_hba *hba); +static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up); +static irqreturn_t ufshcd_intr(int irq, void *__hba); +static int ufshcd_change_power_mode(struct ufs_hba *hba, + struct ufs_pa_layer_attr *pwr_mode); +static int ufshcd_setup_hba_vreg(struct ufs_hba *hba, bool on); +static int ufshcd_setup_vreg(struct ufs_hba *hba, bool on); +static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba, + struct ufs_vreg *vreg); +static int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag); +static void ufshcd_wb_toggle_buf_flush_during_h8(struct ufs_hba *hba, + bool enable); +static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba); +static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba); + +static inline void ufshcd_enable_irq(struct ufs_hba *hba) +{ + if (!hba->is_irq_enabled) { + enable_irq(hba->irq); + hba->is_irq_enabled = true; + } +} + +static inline void ufshcd_disable_irq(struct ufs_hba *hba) +{ + if (hba->is_irq_enabled) { + disable_irq(hba->irq); + hba->is_irq_enabled = false; + } +} + +static void ufshcd_configure_wb(struct ufs_hba *hba) +{ + if (!ufshcd_is_wb_allowed(hba)) + return; + + ufshcd_wb_toggle(hba, true); + + ufshcd_wb_toggle_buf_flush_during_h8(hba, true); + + if (ufshcd_is_wb_buf_flush_allowed(hba)) + ufshcd_wb_toggle_buf_flush(hba, true); +} + +static void ufshcd_scsi_unblock_requests(struct ufs_hba *hba) +{ + if (atomic_dec_and_test(&hba->scsi_block_reqs_cnt)) + scsi_unblock_requests(hba->host); +} + +static void ufshcd_scsi_block_requests(struct ufs_hba *hba) +{ + if (atomic_inc_return(&hba->scsi_block_reqs_cnt) == 1) + scsi_block_requests(hba->host); +} + +static void ufshcd_add_cmd_upiu_trace(struct ufs_hba *hba, unsigned int tag, + enum ufs_trace_str_t str_t) +{ + struct utp_upiu_req *rq = hba->lrb[tag].ucd_req_ptr; + struct utp_upiu_header *header; + + if (!trace_ufshcd_upiu_enabled()) + return; + + if (str_t == UFS_CMD_SEND) + header = &rq->header; + else + header = &hba->lrb[tag].ucd_rsp_ptr->header; + + trace_ufshcd_upiu(dev_name(hba->dev), str_t, header, &rq->sc.cdb, + UFS_TSF_CDB); +} + +static void ufshcd_add_query_upiu_trace(struct ufs_hba *hba, + enum ufs_trace_str_t str_t, + struct utp_upiu_req *rq_rsp) +{ + if (!trace_ufshcd_upiu_enabled()) + return; + + trace_ufshcd_upiu(dev_name(hba->dev), str_t, &rq_rsp->header, + &rq_rsp->qr, UFS_TSF_OSF); +} + +static void ufshcd_add_tm_upiu_trace(struct ufs_hba *hba, unsigned int tag, + enum ufs_trace_str_t str_t) +{ + struct utp_task_req_desc *descp = &hba->utmrdl_base_addr[tag]; + + if (!trace_ufshcd_upiu_enabled()) + return; + + if (str_t == UFS_TM_SEND) + trace_ufshcd_upiu(dev_name(hba->dev), str_t, + &descp->upiu_req.req_header, + &descp->upiu_req.input_param1, + UFS_TSF_TM_INPUT); + else + trace_ufshcd_upiu(dev_name(hba->dev), str_t, + &descp->upiu_rsp.rsp_header, + &descp->upiu_rsp.output_param1, + UFS_TSF_TM_OUTPUT); +} + +static void ufshcd_add_uic_command_trace(struct ufs_hba *hba, + const struct uic_command *ucmd, + enum ufs_trace_str_t str_t) +{ + u32 cmd; + + if (!trace_ufshcd_uic_command_enabled()) + return; + + if (str_t == UFS_CMD_SEND) + cmd = ucmd->command; + else + cmd = ufshcd_readl(hba, REG_UIC_COMMAND); + + trace_ufshcd_uic_command(dev_name(hba->dev), str_t, cmd, + ufshcd_readl(hba, REG_UIC_COMMAND_ARG_1), + ufshcd_readl(hba, REG_UIC_COMMAND_ARG_2), + ufshcd_readl(hba, REG_UIC_COMMAND_ARG_3)); +} + +static void ufshcd_add_command_trace(struct ufs_hba *hba, unsigned int tag, + enum ufs_trace_str_t str_t) +{ + u64 lba = 0; + u8 opcode = 0, group_id = 0; + u32 intr, doorbell; + struct ufshcd_lrb *lrbp = &hba->lrb[tag]; + struct scsi_cmnd *cmd = lrbp->cmd; + struct request *rq = scsi_cmd_to_rq(cmd); + int transfer_len = -1; + + if (!cmd) + return; + + /* trace UPIU also */ + ufshcd_add_cmd_upiu_trace(hba, tag, str_t); + if (!trace_ufshcd_command_enabled()) + return; + + opcode = cmd->cmnd[0]; + + if (opcode == READ_10 || opcode == WRITE_10) { + /* + * Currently we only fully trace read(10) and write(10) commands + */ + transfer_len = + be32_to_cpu(lrbp->ucd_req_ptr->sc.exp_data_transfer_len); + lba = scsi_get_lba(cmd); + if (opcode == WRITE_10) + group_id = lrbp->cmd->cmnd[6]; + } else if (opcode == UNMAP) { + /* + * The number of Bytes to be unmapped beginning with the lba. + */ + transfer_len = blk_rq_bytes(rq); + lba = scsi_get_lba(cmd); + } + + intr = ufshcd_readl(hba, REG_INTERRUPT_STATUS); + doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); + trace_ufshcd_command(dev_name(hba->dev), str_t, tag, + doorbell, transfer_len, intr, lba, opcode, group_id); +} + +static void ufshcd_print_clk_freqs(struct ufs_hba *hba) +{ + struct ufs_clk_info *clki; + struct list_head *head = &hba->clk_list_head; + + if (list_empty(head)) + return; + + list_for_each_entry(clki, head, list) { + if (!IS_ERR_OR_NULL(clki->clk) && clki->min_freq && + clki->max_freq) + dev_err(hba->dev, "clk: %s, rate: %u\n", + clki->name, clki->curr_freq); + } +} + +static void ufshcd_print_evt(struct ufs_hba *hba, u32 id, + const char *err_name) +{ + int i; + bool found = false; + const struct ufs_event_hist *e; + + if (id >= UFS_EVT_CNT) + return; + + e = &hba->ufs_stats.event[id]; + + for (i = 0; i < UFS_EVENT_HIST_LENGTH; i++) { + int p = (i + e->pos) % UFS_EVENT_HIST_LENGTH; + + if (e->tstamp[p] == 0) + continue; + dev_err(hba->dev, "%s[%d] = 0x%x at %lld us\n", err_name, p, + e->val[p], div_u64(e->tstamp[p], 1000)); + found = true; + } + + if (!found) + dev_err(hba->dev, "No record of %s\n", err_name); + else + dev_err(hba->dev, "%s: total cnt=%llu\n", err_name, e->cnt); +} + +static void ufshcd_print_evt_hist(struct ufs_hba *hba) +{ + ufshcd_dump_regs(hba, 0, UFSHCI_REG_SPACE_SIZE, "host_regs: "); + + ufshcd_print_evt(hba, UFS_EVT_PA_ERR, "pa_err"); + ufshcd_print_evt(hba, UFS_EVT_DL_ERR, "dl_err"); + ufshcd_print_evt(hba, UFS_EVT_NL_ERR, "nl_err"); + ufshcd_print_evt(hba, UFS_EVT_TL_ERR, "tl_err"); + ufshcd_print_evt(hba, UFS_EVT_DME_ERR, "dme_err"); + ufshcd_print_evt(hba, UFS_EVT_AUTO_HIBERN8_ERR, + "auto_hibern8_err"); + ufshcd_print_evt(hba, UFS_EVT_FATAL_ERR, "fatal_err"); + ufshcd_print_evt(hba, UFS_EVT_LINK_STARTUP_FAIL, + "link_startup_fail"); + ufshcd_print_evt(hba, UFS_EVT_RESUME_ERR, "resume_fail"); + ufshcd_print_evt(hba, UFS_EVT_SUSPEND_ERR, + "suspend_fail"); + ufshcd_print_evt(hba, UFS_EVT_DEV_RESET, "dev_reset"); + ufshcd_print_evt(hba, UFS_EVT_HOST_RESET, "host_reset"); + ufshcd_print_evt(hba, UFS_EVT_ABORT, "task_abort"); + + ufshcd_vops_dbg_register_dump(hba); +} + +static +void ufshcd_print_trs(struct ufs_hba *hba, unsigned long bitmap, bool pr_prdt) +{ + const struct ufshcd_lrb *lrbp; + int prdt_length; + int tag; + + for_each_set_bit(tag, &bitmap, hba->nutrs) { + lrbp = &hba->lrb[tag]; + + dev_err(hba->dev, "UPIU[%d] - issue time %lld us\n", + tag, div_u64(lrbp->issue_time_stamp_local_clock, 1000)); + dev_err(hba->dev, "UPIU[%d] - complete time %lld us\n", + tag, div_u64(lrbp->compl_time_stamp_local_clock, 1000)); + dev_err(hba->dev, + "UPIU[%d] - Transfer Request Descriptor phys@0x%llx\n", + tag, (u64)lrbp->utrd_dma_addr); + + ufshcd_hex_dump("UPIU TRD: ", lrbp->utr_descriptor_ptr, + sizeof(struct utp_transfer_req_desc)); + dev_err(hba->dev, "UPIU[%d] - Request UPIU phys@0x%llx\n", tag, + (u64)lrbp->ucd_req_dma_addr); + ufshcd_hex_dump("UPIU REQ: ", lrbp->ucd_req_ptr, + sizeof(struct utp_upiu_req)); + dev_err(hba->dev, "UPIU[%d] - Response UPIU phys@0x%llx\n", tag, + (u64)lrbp->ucd_rsp_dma_addr); + ufshcd_hex_dump("UPIU RSP: ", lrbp->ucd_rsp_ptr, + sizeof(struct utp_upiu_rsp)); + + prdt_length = le16_to_cpu( + lrbp->utr_descriptor_ptr->prd_table_length); + if (hba->quirks & UFSHCD_QUIRK_PRDT_BYTE_GRAN) + prdt_length /= sizeof(struct ufshcd_sg_entry); + + dev_err(hba->dev, + "UPIU[%d] - PRDT - %d entries phys@0x%llx\n", + tag, prdt_length, + (u64)lrbp->ucd_prdt_dma_addr); + + if (pr_prdt) + ufshcd_hex_dump("UPIU PRDT: ", lrbp->ucd_prdt_ptr, + sizeof(struct ufshcd_sg_entry) * prdt_length); + } +} + +static void ufshcd_print_tmrs(struct ufs_hba *hba, unsigned long bitmap) +{ + int tag; + + for_each_set_bit(tag, &bitmap, hba->nutmrs) { + struct utp_task_req_desc *tmrdp = &hba->utmrdl_base_addr[tag]; + + dev_err(hba->dev, "TM[%d] - Task Management Header\n", tag); + ufshcd_hex_dump("", tmrdp, sizeof(*tmrdp)); + } +} + +static void ufshcd_print_host_state(struct ufs_hba *hba) +{ + const struct scsi_device *sdev_ufs = hba->ufs_device_wlun; + + dev_err(hba->dev, "UFS Host state=%d\n", hba->ufshcd_state); + dev_err(hba->dev, "outstanding reqs=0x%lx tasks=0x%lx\n", + hba->outstanding_reqs, hba->outstanding_tasks); + dev_err(hba->dev, "saved_err=0x%x, saved_uic_err=0x%x\n", + hba->saved_err, hba->saved_uic_err); + dev_err(hba->dev, "Device power mode=%d, UIC link state=%d\n", + hba->curr_dev_pwr_mode, hba->uic_link_state); + dev_err(hba->dev, "PM in progress=%d, sys. suspended=%d\n", + hba->pm_op_in_progress, hba->is_sys_suspended); + dev_err(hba->dev, "Auto BKOPS=%d, Host self-block=%d\n", + hba->auto_bkops_enabled, hba->host->host_self_blocked); + dev_err(hba->dev, "Clk gate=%d\n", hba->clk_gating.state); + dev_err(hba->dev, + "last_hibern8_exit_tstamp at %lld us, hibern8_exit_cnt=%d\n", + div_u64(hba->ufs_stats.last_hibern8_exit_tstamp, 1000), + hba->ufs_stats.hibern8_exit_cnt); + dev_err(hba->dev, "last intr at %lld us, last intr status=0x%x\n", + div_u64(hba->ufs_stats.last_intr_ts, 1000), + hba->ufs_stats.last_intr_status); + dev_err(hba->dev, "error handling flags=0x%x, req. abort count=%d\n", + hba->eh_flags, hba->req_abort_count); + dev_err(hba->dev, "hba->ufs_version=0x%x, Host capabilities=0x%x, caps=0x%x\n", + hba->ufs_version, hba->capabilities, hba->caps); + dev_err(hba->dev, "quirks=0x%x, dev. quirks=0x%x\n", hba->quirks, + hba->dev_quirks); + if (sdev_ufs) + dev_err(hba->dev, "UFS dev info: %.8s %.16s rev %.4s\n", + sdev_ufs->vendor, sdev_ufs->model, sdev_ufs->rev); + + ufshcd_print_clk_freqs(hba); +} + +/** + * ufshcd_print_pwr_info - print power params as saved in hba + * power info + * @hba: per-adapter instance + */ +static void ufshcd_print_pwr_info(struct ufs_hba *hba) +{ + static const char * const names[] = { + "INVALID MODE", + "FAST MODE", + "SLOW_MODE", + "INVALID MODE", + "FASTAUTO_MODE", + "SLOWAUTO_MODE", + "INVALID MODE", + }; + + /* + * Using dev_dbg to avoid messages during runtime PM to avoid + * never-ending cycles of messages written back to storage by user space + * causing runtime resume, causing more messages and so on. + */ + dev_dbg(hba->dev, "%s:[RX, TX]: gear=[%d, %d], lane[%d, %d], pwr[%s, %s], rate = %d\n", + __func__, + hba->pwr_info.gear_rx, hba->pwr_info.gear_tx, + hba->pwr_info.lane_rx, hba->pwr_info.lane_tx, + names[hba->pwr_info.pwr_rx], + names[hba->pwr_info.pwr_tx], + hba->pwr_info.hs_rate); +} + +static void ufshcd_device_reset(struct ufs_hba *hba) +{ + int err; + + err = ufshcd_vops_device_reset(hba); + + if (!err) { + ufshcd_set_ufs_dev_active(hba); + if (ufshcd_is_wb_allowed(hba)) { + hba->dev_info.wb_enabled = false; + hba->dev_info.wb_buf_flush_enabled = false; + } + } + if (err != -EOPNOTSUPP) + ufshcd_update_evt_hist(hba, UFS_EVT_DEV_RESET, err); +} + +void ufshcd_delay_us(unsigned long us, unsigned long tolerance) +{ + if (!us) + return; + + if (us < 10) + udelay(us); + else + usleep_range(us, us + tolerance); +} +EXPORT_SYMBOL_GPL(ufshcd_delay_us); + +/** + * ufshcd_wait_for_register - wait for register value to change + * @hba: per-adapter interface + * @reg: mmio register offset + * @mask: mask to apply to the read register value + * @val: value to wait for + * @interval_us: polling interval in microseconds + * @timeout_ms: timeout in milliseconds + * + * Return: + * -ETIMEDOUT on error, zero on success. + */ +static int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask, + u32 val, unsigned long interval_us, + unsigned long timeout_ms) +{ + int err = 0; + unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms); + + /* ignore bits that we don't intend to wait on */ + val = val & mask; + + while ((ufshcd_readl(hba, reg) & mask) != val) { + usleep_range(interval_us, interval_us + 50); + if (time_after(jiffies, timeout)) { + if ((ufshcd_readl(hba, reg) & mask) != val) + err = -ETIMEDOUT; + break; + } + } + + return err; +} + +/** + * ufshcd_get_intr_mask - Get the interrupt bit mask + * @hba: Pointer to adapter instance + * + * Returns interrupt bit mask per version + */ +static inline u32 ufshcd_get_intr_mask(struct ufs_hba *hba) +{ + if (hba->ufs_version == ufshci_version(1, 0)) + return INTERRUPT_MASK_ALL_VER_10; + if (hba->ufs_version <= ufshci_version(2, 0)) + return INTERRUPT_MASK_ALL_VER_11; + + return INTERRUPT_MASK_ALL_VER_21; +} + +/** + * ufshcd_get_ufs_version - Get the UFS version supported by the HBA + * @hba: Pointer to adapter instance + * + * Returns UFSHCI version supported by the controller + */ +static inline u32 ufshcd_get_ufs_version(struct ufs_hba *hba) +{ + u32 ufshci_ver; + + if (hba->quirks & UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION) + ufshci_ver = ufshcd_vops_get_ufs_hci_version(hba); + else + ufshci_ver = ufshcd_readl(hba, REG_UFS_VERSION); + + /* + * UFSHCI v1.x uses a different version scheme, in order + * to allow the use of comparisons with the ufshci_version + * function, we convert it to the same scheme as ufs 2.0+. + */ + if (ufshci_ver & 0x00010000) + return ufshci_version(1, ufshci_ver & 0x00000100); + + return ufshci_ver; +} + +/** + * ufshcd_is_device_present - Check if any device connected to + * the host controller + * @hba: pointer to adapter instance + * + * Returns true if device present, false if no device detected + */ +static inline bool ufshcd_is_device_present(struct ufs_hba *hba) +{ + return ufshcd_readl(hba, REG_CONTROLLER_STATUS) & DEVICE_PRESENT; +} + +/** + * ufshcd_get_tr_ocs - Get the UTRD Overall Command Status + * @lrbp: pointer to local command reference block + * + * This function is used to get the OCS field from UTRD + * Returns the OCS field in the UTRD + */ +static enum utp_ocs ufshcd_get_tr_ocs(struct ufshcd_lrb *lrbp) +{ + return le32_to_cpu(lrbp->utr_descriptor_ptr->header.dword_2) & MASK_OCS; +} + +/** + * ufshcd_utrl_clear() - Clear requests from the controller request list. + * @hba: per adapter instance + * @mask: mask with one bit set for each request to be cleared + */ +static inline void ufshcd_utrl_clear(struct ufs_hba *hba, u32 mask) +{ + if (hba->quirks & UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR) + mask = ~mask; + /* + * From the UFSHCI specification: "UTP Transfer Request List CLear + * Register (UTRLCLR): This field is bit significant. Each bit + * corresponds to a slot in the UTP Transfer Request List, where bit 0 + * corresponds to request slot 0. A bit in this field is set to ‘0’ + * by host software to indicate to the host controller that a transfer + * request slot is cleared. The host controller + * shall free up any resources associated to the request slot + * immediately, and shall set the associated bit in UTRLDBR to ‘0’. The + * host software indicates no change to request slots by setting the + * associated bits in this field to ‘1’. Bits in this field shall only + * be set ‘1’ or ‘0’ by host software when UTRLRSR is set to ‘1’." + */ + ufshcd_writel(hba, ~mask, REG_UTP_TRANSFER_REQ_LIST_CLEAR); +} + +/** + * ufshcd_utmrl_clear - Clear a bit in UTMRLCLR register + * @hba: per adapter instance + * @pos: position of the bit to be cleared + */ +static inline void ufshcd_utmrl_clear(struct ufs_hba *hba, u32 pos) +{ + if (hba->quirks & UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR) + ufshcd_writel(hba, (1 << pos), REG_UTP_TASK_REQ_LIST_CLEAR); + else + ufshcd_writel(hba, ~(1 << pos), REG_UTP_TASK_REQ_LIST_CLEAR); +} + +/** + * ufshcd_get_lists_status - Check UCRDY, UTRLRDY and UTMRLRDY + * @reg: Register value of host controller status + * + * Returns integer, 0 on Success and positive value if failed + */ +static inline int ufshcd_get_lists_status(u32 reg) +{ + return !((reg & UFSHCD_STATUS_READY) == UFSHCD_STATUS_READY); +} + +/** + * ufshcd_get_uic_cmd_result - Get the UIC command result + * @hba: Pointer to adapter instance + * + * This function gets the result of UIC command completion + * Returns 0 on success, non zero value on error + */ +static inline int ufshcd_get_uic_cmd_result(struct ufs_hba *hba) +{ + return ufshcd_readl(hba, REG_UIC_COMMAND_ARG_2) & + MASK_UIC_COMMAND_RESULT; +} + +/** + * ufshcd_get_dme_attr_val - Get the value of attribute returned by UIC command + * @hba: Pointer to adapter instance + * + * This function gets UIC command argument3 + * Returns 0 on success, non zero value on error + */ +static inline u32 ufshcd_get_dme_attr_val(struct ufs_hba *hba) +{ + return ufshcd_readl(hba, REG_UIC_COMMAND_ARG_3); +} + +/** + * ufshcd_get_req_rsp - returns the TR response transaction type + * @ucd_rsp_ptr: pointer to response UPIU + */ +static inline int +ufshcd_get_req_rsp(struct utp_upiu_rsp *ucd_rsp_ptr) +{ + return be32_to_cpu(ucd_rsp_ptr->header.dword_0) >> 24; +} + +/** + * ufshcd_get_rsp_upiu_result - Get the result from response UPIU + * @ucd_rsp_ptr: pointer to response UPIU + * + * This function gets the response status and scsi_status from response UPIU + * Returns the response result code. + */ +static inline int +ufshcd_get_rsp_upiu_result(struct utp_upiu_rsp *ucd_rsp_ptr) +{ + return be32_to_cpu(ucd_rsp_ptr->header.dword_1) & MASK_RSP_UPIU_RESULT; +} + +/* + * ufshcd_get_rsp_upiu_data_seg_len - Get the data segment length + * from response UPIU + * @ucd_rsp_ptr: pointer to response UPIU + * + * Return the data segment length. + */ +static inline unsigned int +ufshcd_get_rsp_upiu_data_seg_len(struct utp_upiu_rsp *ucd_rsp_ptr) +{ + return be32_to_cpu(ucd_rsp_ptr->header.dword_2) & + MASK_RSP_UPIU_DATA_SEG_LEN; +} + +/** + * ufshcd_is_exception_event - Check if the device raised an exception event + * @ucd_rsp_ptr: pointer to response UPIU + * + * The function checks if the device raised an exception event indicated in + * the Device Information field of response UPIU. + * + * Returns true if exception is raised, false otherwise. + */ +static inline bool ufshcd_is_exception_event(struct utp_upiu_rsp *ucd_rsp_ptr) +{ + return be32_to_cpu(ucd_rsp_ptr->header.dword_2) & + MASK_RSP_EXCEPTION_EVENT; +} + +/** + * ufshcd_reset_intr_aggr - Reset interrupt aggregation values. + * @hba: per adapter instance + */ +static inline void +ufshcd_reset_intr_aggr(struct ufs_hba *hba) +{ + ufshcd_writel(hba, INT_AGGR_ENABLE | + INT_AGGR_COUNTER_AND_TIMER_RESET, + REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL); +} + +/** + * ufshcd_config_intr_aggr - Configure interrupt aggregation values. + * @hba: per adapter instance + * @cnt: Interrupt aggregation counter threshold + * @tmout: Interrupt aggregation timeout value + */ +static inline void +ufshcd_config_intr_aggr(struct ufs_hba *hba, u8 cnt, u8 tmout) +{ + ufshcd_writel(hba, INT_AGGR_ENABLE | INT_AGGR_PARAM_WRITE | + INT_AGGR_COUNTER_THLD_VAL(cnt) | + INT_AGGR_TIMEOUT_VAL(tmout), + REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL); +} + +/** + * ufshcd_disable_intr_aggr - Disables interrupt aggregation. + * @hba: per adapter instance + */ +static inline void ufshcd_disable_intr_aggr(struct ufs_hba *hba) +{ + ufshcd_writel(hba, 0, REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL); +} + +/** + * ufshcd_enable_run_stop_reg - Enable run-stop registers, + * When run-stop registers are set to 1, it indicates the + * host controller that it can process the requests + * @hba: per adapter instance + */ +static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba) +{ + ufshcd_writel(hba, UTP_TASK_REQ_LIST_RUN_STOP_BIT, + REG_UTP_TASK_REQ_LIST_RUN_STOP); + ufshcd_writel(hba, UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT, + REG_UTP_TRANSFER_REQ_LIST_RUN_STOP); +} + +/** + * ufshcd_hba_start - Start controller initialization sequence + * @hba: per adapter instance + */ +static inline void ufshcd_hba_start(struct ufs_hba *hba) +{ + u32 val = CONTROLLER_ENABLE; + + if (ufshcd_crypto_enable(hba)) + val |= CRYPTO_GENERAL_ENABLE; + + ufshcd_writel(hba, val, REG_CONTROLLER_ENABLE); +} + +/** + * ufshcd_is_hba_active - Get controller state + * @hba: per adapter instance + * + * Returns true if and only if the controller is active. + */ +static inline bool ufshcd_is_hba_active(struct ufs_hba *hba) +{ + return ufshcd_readl(hba, REG_CONTROLLER_ENABLE) & CONTROLLER_ENABLE; +} + +u32 ufshcd_get_local_unipro_ver(struct ufs_hba *hba) +{ + /* HCI version 1.0 and 1.1 supports UniPro 1.41 */ + if (hba->ufs_version <= ufshci_version(1, 1)) + return UFS_UNIPRO_VER_1_41; + else + return UFS_UNIPRO_VER_1_6; +} +EXPORT_SYMBOL(ufshcd_get_local_unipro_ver); + +static bool ufshcd_is_unipro_pa_params_tuning_req(struct ufs_hba *hba) +{ + /* + * If both host and device support UniPro ver1.6 or later, PA layer + * parameters tuning happens during link startup itself. + * + * We can manually tune PA layer parameters if either host or device + * doesn't support UniPro ver 1.6 or later. But to keep manual tuning + * logic simple, we will only do manual tuning if local unipro version + * doesn't support ver1.6 or later. + */ + return ufshcd_get_local_unipro_ver(hba) < UFS_UNIPRO_VER_1_6; +} + +/** + * ufshcd_set_clk_freq - set UFS controller clock frequencies + * @hba: per adapter instance + * @scale_up: If True, set max possible frequency othewise set low frequency + * + * Returns 0 if successful + * Returns < 0 for any other errors + */ +static int ufshcd_set_clk_freq(struct ufs_hba *hba, bool scale_up) +{ + int ret = 0; + struct ufs_clk_info *clki; + struct list_head *head = &hba->clk_list_head; + + if (list_empty(head)) + goto out; + + list_for_each_entry(clki, head, list) { + if (!IS_ERR_OR_NULL(clki->clk)) { + if (scale_up && clki->max_freq) { + if (clki->curr_freq == clki->max_freq) + continue; + + ret = clk_set_rate(clki->clk, clki->max_freq); + if (ret) { + dev_err(hba->dev, "%s: %s clk set rate(%dHz) failed, %d\n", + __func__, clki->name, + clki->max_freq, ret); + break; + } + trace_ufshcd_clk_scaling(dev_name(hba->dev), + "scaled up", clki->name, + clki->curr_freq, + clki->max_freq); + + clki->curr_freq = clki->max_freq; + + } else if (!scale_up && clki->min_freq) { + if (clki->curr_freq == clki->min_freq) + continue; + + ret = clk_set_rate(clki->clk, clki->min_freq); + if (ret) { + dev_err(hba->dev, "%s: %s clk set rate(%dHz) failed, %d\n", + __func__, clki->name, + clki->min_freq, ret); + break; + } + trace_ufshcd_clk_scaling(dev_name(hba->dev), + "scaled down", clki->name, + clki->curr_freq, + clki->min_freq); + clki->curr_freq = clki->min_freq; + } + } + dev_dbg(hba->dev, "%s: clk: %s, rate: %lu\n", __func__, + clki->name, clk_get_rate(clki->clk)); + } + +out: + return ret; +} + +/** + * ufshcd_scale_clks - scale up or scale down UFS controller clocks + * @hba: per adapter instance + * @scale_up: True if scaling up and false if scaling down + * + * Returns 0 if successful + * Returns < 0 for any other errors + */ +static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up) +{ + int ret = 0; + ktime_t start = ktime_get(); + + ret = ufshcd_vops_clk_scale_notify(hba, scale_up, PRE_CHANGE); + if (ret) + goto out; + + ret = ufshcd_set_clk_freq(hba, scale_up); + if (ret) + goto out; + + ret = ufshcd_vops_clk_scale_notify(hba, scale_up, POST_CHANGE); + if (ret) + ufshcd_set_clk_freq(hba, !scale_up); + +out: + trace_ufshcd_profile_clk_scaling(dev_name(hba->dev), + (scale_up ? "up" : "down"), + ktime_to_us(ktime_sub(ktime_get(), start)), ret); + return ret; +} + +/** + * ufshcd_is_devfreq_scaling_required - check if scaling is required or not + * @hba: per adapter instance + * @scale_up: True if scaling up and false if scaling down + * + * Returns true if scaling is required, false otherwise. + */ +static bool ufshcd_is_devfreq_scaling_required(struct ufs_hba *hba, + bool scale_up) +{ + struct ufs_clk_info *clki; + struct list_head *head = &hba->clk_list_head; + + if (list_empty(head)) + return false; + + list_for_each_entry(clki, head, list) { + if (!IS_ERR_OR_NULL(clki->clk)) { + if (scale_up && clki->max_freq) { + if (clki->curr_freq == clki->max_freq) + continue; + return true; + } else if (!scale_up && clki->min_freq) { + if (clki->curr_freq == clki->min_freq) + continue; + return true; + } + } + } + + return false; +} + +/* + * Determine the number of pending commands by counting the bits in the SCSI + * device budget maps. This approach has been selected because a bit is set in + * the budget map before scsi_host_queue_ready() checks the host_self_blocked + * flag. The host_self_blocked flag can be modified by calling + * scsi_block_requests() or scsi_unblock_requests(). + */ +static u32 ufshcd_pending_cmds(struct ufs_hba *hba) +{ + const struct scsi_device *sdev; + u32 pending = 0; + + lockdep_assert_held(hba->host->host_lock); + __shost_for_each_device(sdev, hba->host) + pending += sbitmap_weight(&sdev->budget_map); + + return pending; +} + +static int ufshcd_wait_for_doorbell_clr(struct ufs_hba *hba, + u64 wait_timeout_us) +{ + unsigned long flags; + int ret = 0; + u32 tm_doorbell; + u32 tr_pending; + bool timeout = false, do_last_check = false; + ktime_t start; + + ufshcd_hold(hba, false); + spin_lock_irqsave(hba->host->host_lock, flags); + /* + * Wait for all the outstanding tasks/transfer requests. + * Verify by checking the doorbell registers are clear. + */ + start = ktime_get(); + do { + if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL) { + ret = -EBUSY; + goto out; + } + + tm_doorbell = ufshcd_readl(hba, REG_UTP_TASK_REQ_DOOR_BELL); + tr_pending = ufshcd_pending_cmds(hba); + if (!tm_doorbell && !tr_pending) { + timeout = false; + break; + } else if (do_last_check) { + break; + } + + spin_unlock_irqrestore(hba->host->host_lock, flags); + schedule(); + if (ktime_to_us(ktime_sub(ktime_get(), start)) > + wait_timeout_us) { + timeout = true; + /* + * We might have scheduled out for long time so make + * sure to check if doorbells are cleared by this time + * or not. + */ + do_last_check = true; + } + spin_lock_irqsave(hba->host->host_lock, flags); + } while (tm_doorbell || tr_pending); + + if (timeout) { + dev_err(hba->dev, + "%s: timedout waiting for doorbell to clear (tm=0x%x, tr=0x%x)\n", + __func__, tm_doorbell, tr_pending); + ret = -EBUSY; + } +out: + spin_unlock_irqrestore(hba->host->host_lock, flags); + ufshcd_release(hba); + return ret; +} + +/** + * ufshcd_scale_gear - scale up/down UFS gear + * @hba: per adapter instance + * @scale_up: True for scaling up gear and false for scaling down + * + * Returns 0 for success, + * Returns -EBUSY if scaling can't happen at this time + * Returns non-zero for any other errors + */ +static int ufshcd_scale_gear(struct ufs_hba *hba, bool scale_up) +{ + int ret = 0; + struct ufs_pa_layer_attr new_pwr_info; + + if (scale_up) { + memcpy(&new_pwr_info, &hba->clk_scaling.saved_pwr_info.info, + sizeof(struct ufs_pa_layer_attr)); + } else { + memcpy(&new_pwr_info, &hba->pwr_info, + sizeof(struct ufs_pa_layer_attr)); + + if (hba->pwr_info.gear_tx > hba->clk_scaling.min_gear || + hba->pwr_info.gear_rx > hba->clk_scaling.min_gear) { + /* save the current power mode */ + memcpy(&hba->clk_scaling.saved_pwr_info.info, + &hba->pwr_info, + sizeof(struct ufs_pa_layer_attr)); + + /* scale down gear */ + new_pwr_info.gear_tx = hba->clk_scaling.min_gear; + new_pwr_info.gear_rx = hba->clk_scaling.min_gear; + } + } + + /* check if the power mode needs to be changed or not? */ + ret = ufshcd_config_pwr_mode(hba, &new_pwr_info); + if (ret) + dev_err(hba->dev, "%s: failed err %d, old gear: (tx %d rx %d), new gear: (tx %d rx %d)", + __func__, ret, + hba->pwr_info.gear_tx, hba->pwr_info.gear_rx, + new_pwr_info.gear_tx, new_pwr_info.gear_rx); + + return ret; +} + +static int ufshcd_clock_scaling_prepare(struct ufs_hba *hba) +{ + #define DOORBELL_CLR_TOUT_US (1000 * 1000) /* 1 sec */ + int ret = 0; + /* + * make sure that there are no outstanding requests when + * clock scaling is in progress + */ + ufshcd_scsi_block_requests(hba); + mutex_lock(&hba->wb_mutex); + down_write(&hba->clk_scaling_lock); + + if (!hba->clk_scaling.is_allowed || + ufshcd_wait_for_doorbell_clr(hba, DOORBELL_CLR_TOUT_US)) { + ret = -EBUSY; + up_write(&hba->clk_scaling_lock); + mutex_unlock(&hba->wb_mutex); + ufshcd_scsi_unblock_requests(hba); + goto out; + } + + /* let's not get into low power until clock scaling is completed */ + ufshcd_hold(hba, false); + +out: + return ret; +} + +static void ufshcd_clock_scaling_unprepare(struct ufs_hba *hba, int err, bool scale_up) +{ + up_write(&hba->clk_scaling_lock); + + /* Enable Write Booster if we have scaled up else disable it */ + if (ufshcd_enable_wb_if_scaling_up(hba) && !err) + ufshcd_wb_toggle(hba, scale_up); + + mutex_unlock(&hba->wb_mutex); + + ufshcd_scsi_unblock_requests(hba); + ufshcd_release(hba); +} + +/** + * ufshcd_devfreq_scale - scale up/down UFS clocks and gear + * @hba: per adapter instance + * @scale_up: True for scaling up and false for scalin down + * + * Returns 0 for success, + * Returns -EBUSY if scaling can't happen at this time + * Returns non-zero for any other errors + */ +static int ufshcd_devfreq_scale(struct ufs_hba *hba, bool scale_up) +{ + int ret = 0; + + ret = ufshcd_clock_scaling_prepare(hba); + if (ret) + return ret; + + /* scale down the gear before scaling down clocks */ + if (!scale_up) { + ret = ufshcd_scale_gear(hba, false); + if (ret) + goto out_unprepare; + } + + ret = ufshcd_scale_clks(hba, scale_up); + if (ret) { + if (!scale_up) + ufshcd_scale_gear(hba, true); + goto out_unprepare; + } + + /* scale up the gear after scaling up clocks */ + if (scale_up) { + ret = ufshcd_scale_gear(hba, true); + if (ret) { + ufshcd_scale_clks(hba, false); + goto out_unprepare; + } + } + +out_unprepare: + ufshcd_clock_scaling_unprepare(hba, ret, scale_up); + return ret; +} + +static void ufshcd_clk_scaling_suspend_work(struct work_struct *work) +{ + struct ufs_hba *hba = container_of(work, struct ufs_hba, + clk_scaling.suspend_work); + unsigned long irq_flags; + + spin_lock_irqsave(hba->host->host_lock, irq_flags); + if (hba->clk_scaling.active_reqs || hba->clk_scaling.is_suspended) { + spin_unlock_irqrestore(hba->host->host_lock, irq_flags); + return; + } + hba->clk_scaling.is_suspended = true; + spin_unlock_irqrestore(hba->host->host_lock, irq_flags); + + __ufshcd_suspend_clkscaling(hba); +} + +static void ufshcd_clk_scaling_resume_work(struct work_struct *work) +{ + struct ufs_hba *hba = container_of(work, struct ufs_hba, + clk_scaling.resume_work); + unsigned long irq_flags; + + spin_lock_irqsave(hba->host->host_lock, irq_flags); + if (!hba->clk_scaling.is_suspended) { + spin_unlock_irqrestore(hba->host->host_lock, irq_flags); + return; + } + hba->clk_scaling.is_suspended = false; + spin_unlock_irqrestore(hba->host->host_lock, irq_flags); + + devfreq_resume_device(hba->devfreq); +} + +static int ufshcd_devfreq_target(struct device *dev, + unsigned long *freq, u32 flags) +{ + int ret = 0; + struct ufs_hba *hba = dev_get_drvdata(dev); + ktime_t start; + bool scale_up, sched_clk_scaling_suspend_work = false; + struct list_head *clk_list = &hba->clk_list_head; + struct ufs_clk_info *clki; + unsigned long irq_flags; + + if (!ufshcd_is_clkscaling_supported(hba)) + return -EINVAL; + + clki = list_first_entry(&hba->clk_list_head, struct ufs_clk_info, list); + /* Override with the closest supported frequency */ + *freq = (unsigned long) clk_round_rate(clki->clk, *freq); + spin_lock_irqsave(hba->host->host_lock, irq_flags); + if (ufshcd_eh_in_progress(hba)) { + spin_unlock_irqrestore(hba->host->host_lock, irq_flags); + return 0; + } + + if (!hba->clk_scaling.active_reqs) + sched_clk_scaling_suspend_work = true; + + if (list_empty(clk_list)) { + spin_unlock_irqrestore(hba->host->host_lock, irq_flags); + goto out; + } + + /* Decide based on the rounded-off frequency and update */ + scale_up = *freq == clki->max_freq; + if (!scale_up) + *freq = clki->min_freq; + /* Update the frequency */ + if (!ufshcd_is_devfreq_scaling_required(hba, scale_up)) { + spin_unlock_irqrestore(hba->host->host_lock, irq_flags); + ret = 0; + goto out; /* no state change required */ + } + spin_unlock_irqrestore(hba->host->host_lock, irq_flags); + + start = ktime_get(); + ret = ufshcd_devfreq_scale(hba, scale_up); + + trace_ufshcd_profile_clk_scaling(dev_name(hba->dev), + (scale_up ? "up" : "down"), + ktime_to_us(ktime_sub(ktime_get(), start)), ret); + +out: + if (sched_clk_scaling_suspend_work) + queue_work(hba->clk_scaling.workq, + &hba->clk_scaling.suspend_work); + + return ret; +} + +static int ufshcd_devfreq_get_dev_status(struct device *dev, + struct devfreq_dev_status *stat) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + struct ufs_clk_scaling *scaling = &hba->clk_scaling; + unsigned long flags; + struct list_head *clk_list = &hba->clk_list_head; + struct ufs_clk_info *clki; + ktime_t curr_t; + + if (!ufshcd_is_clkscaling_supported(hba)) + return -EINVAL; + + memset(stat, 0, sizeof(*stat)); + + spin_lock_irqsave(hba->host->host_lock, flags); + curr_t = ktime_get(); + if (!scaling->window_start_t) + goto start_window; + + clki = list_first_entry(clk_list, struct ufs_clk_info, list); + /* + * If current frequency is 0, then the ondemand governor considers + * there's no initial frequency set. And it always requests to set + * to max. frequency. + */ + stat->current_frequency = clki->curr_freq; + if (scaling->is_busy_started) + scaling->tot_busy_t += ktime_us_delta(curr_t, + scaling->busy_start_t); + + stat->total_time = ktime_us_delta(curr_t, scaling->window_start_t); + stat->busy_time = scaling->tot_busy_t; +start_window: + scaling->window_start_t = curr_t; + scaling->tot_busy_t = 0; + + if (hba->outstanding_reqs) { + scaling->busy_start_t = curr_t; + scaling->is_busy_started = true; + } else { + scaling->busy_start_t = 0; + scaling->is_busy_started = false; + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + return 0; +} + +static int ufshcd_devfreq_init(struct ufs_hba *hba) +{ + struct list_head *clk_list = &hba->clk_list_head; + struct ufs_clk_info *clki; + struct devfreq *devfreq; + int ret; + + /* Skip devfreq if we don't have any clocks in the list */ + if (list_empty(clk_list)) + return 0; + + clki = list_first_entry(clk_list, struct ufs_clk_info, list); + dev_pm_opp_add(hba->dev, clki->min_freq, 0); + dev_pm_opp_add(hba->dev, clki->max_freq, 0); + + ufshcd_vops_config_scaling_param(hba, &hba->vps->devfreq_profile, + &hba->vps->ondemand_data); + devfreq = devfreq_add_device(hba->dev, + &hba->vps->devfreq_profile, + DEVFREQ_GOV_SIMPLE_ONDEMAND, + &hba->vps->ondemand_data); + if (IS_ERR(devfreq)) { + ret = PTR_ERR(devfreq); + dev_err(hba->dev, "Unable to register with devfreq %d\n", ret); + + dev_pm_opp_remove(hba->dev, clki->min_freq); + dev_pm_opp_remove(hba->dev, clki->max_freq); + return ret; + } + + hba->devfreq = devfreq; + + return 0; +} + +static void ufshcd_devfreq_remove(struct ufs_hba *hba) +{ + struct list_head *clk_list = &hba->clk_list_head; + struct ufs_clk_info *clki; + + if (!hba->devfreq) + return; + + devfreq_remove_device(hba->devfreq); + hba->devfreq = NULL; + + clki = list_first_entry(clk_list, struct ufs_clk_info, list); + dev_pm_opp_remove(hba->dev, clki->min_freq); + dev_pm_opp_remove(hba->dev, clki->max_freq); +} + +static void __ufshcd_suspend_clkscaling(struct ufs_hba *hba) +{ + unsigned long flags; + + devfreq_suspend_device(hba->devfreq); + spin_lock_irqsave(hba->host->host_lock, flags); + hba->clk_scaling.window_start_t = 0; + spin_unlock_irqrestore(hba->host->host_lock, flags); +} + +static void ufshcd_suspend_clkscaling(struct ufs_hba *hba) +{ + unsigned long flags; + bool suspend = false; + + cancel_work_sync(&hba->clk_scaling.suspend_work); + cancel_work_sync(&hba->clk_scaling.resume_work); + + spin_lock_irqsave(hba->host->host_lock, flags); + if (!hba->clk_scaling.is_suspended) { + suspend = true; + hba->clk_scaling.is_suspended = true; + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + + if (suspend) + __ufshcd_suspend_clkscaling(hba); +} + +static void ufshcd_resume_clkscaling(struct ufs_hba *hba) +{ + unsigned long flags; + bool resume = false; + + spin_lock_irqsave(hba->host->host_lock, flags); + if (hba->clk_scaling.is_suspended) { + resume = true; + hba->clk_scaling.is_suspended = false; + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + + if (resume) + devfreq_resume_device(hba->devfreq); +} + +static ssize_t ufshcd_clkscale_enable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%d\n", hba->clk_scaling.is_enabled); +} + +static ssize_t ufshcd_clkscale_enable_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + u32 value; + int err = 0; + + if (kstrtou32(buf, 0, &value)) + return -EINVAL; + + down(&hba->host_sem); + if (!ufshcd_is_user_access_allowed(hba)) { + err = -EBUSY; + goto out; + } + + value = !!value; + if (value == hba->clk_scaling.is_enabled) + goto out; + + ufshcd_rpm_get_sync(hba); + ufshcd_hold(hba, false); + + hba->clk_scaling.is_enabled = value; + + if (value) { + ufshcd_resume_clkscaling(hba); + } else { + ufshcd_suspend_clkscaling(hba); + err = ufshcd_devfreq_scale(hba, true); + if (err) + dev_err(hba->dev, "%s: failed to scale clocks up %d\n", + __func__, err); + } + + ufshcd_release(hba); + ufshcd_rpm_put_sync(hba); +out: + up(&hba->host_sem); + return err ? err : count; +} + +static void ufshcd_init_clk_scaling_sysfs(struct ufs_hba *hba) +{ + hba->clk_scaling.enable_attr.show = ufshcd_clkscale_enable_show; + hba->clk_scaling.enable_attr.store = ufshcd_clkscale_enable_store; + sysfs_attr_init(&hba->clk_scaling.enable_attr.attr); + hba->clk_scaling.enable_attr.attr.name = "clkscale_enable"; + hba->clk_scaling.enable_attr.attr.mode = 0644; + if (device_create_file(hba->dev, &hba->clk_scaling.enable_attr)) + dev_err(hba->dev, "Failed to create sysfs for clkscale_enable\n"); +} + +static void ufshcd_remove_clk_scaling_sysfs(struct ufs_hba *hba) +{ + if (hba->clk_scaling.enable_attr.attr.name) + device_remove_file(hba->dev, &hba->clk_scaling.enable_attr); +} + +static void ufshcd_init_clk_scaling(struct ufs_hba *hba) +{ + char wq_name[sizeof("ufs_clkscaling_00")]; + + if (!ufshcd_is_clkscaling_supported(hba)) + return; + + if (!hba->clk_scaling.min_gear) + hba->clk_scaling.min_gear = UFS_HS_G1; + + INIT_WORK(&hba->clk_scaling.suspend_work, + ufshcd_clk_scaling_suspend_work); + INIT_WORK(&hba->clk_scaling.resume_work, + ufshcd_clk_scaling_resume_work); + + snprintf(wq_name, sizeof(wq_name), "ufs_clkscaling_%d", + hba->host->host_no); + hba->clk_scaling.workq = create_singlethread_workqueue(wq_name); + + hba->clk_scaling.is_initialized = true; +} + +static void ufshcd_exit_clk_scaling(struct ufs_hba *hba) +{ + if (!hba->clk_scaling.is_initialized) + return; + + ufshcd_remove_clk_scaling_sysfs(hba); + destroy_workqueue(hba->clk_scaling.workq); + ufshcd_devfreq_remove(hba); + hba->clk_scaling.is_initialized = false; +} + +static void ufshcd_ungate_work(struct work_struct *work) +{ + int ret; + unsigned long flags; + struct ufs_hba *hba = container_of(work, struct ufs_hba, + clk_gating.ungate_work); + + cancel_delayed_work_sync(&hba->clk_gating.gate_work); + + spin_lock_irqsave(hba->host->host_lock, flags); + if (hba->clk_gating.state == CLKS_ON) { + spin_unlock_irqrestore(hba->host->host_lock, flags); + goto unblock_reqs; + } + + spin_unlock_irqrestore(hba->host->host_lock, flags); + ufshcd_hba_vreg_set_hpm(hba); + ufshcd_setup_clocks(hba, true); + + ufshcd_enable_irq(hba); + + /* Exit from hibern8 */ + if (ufshcd_can_hibern8_during_gating(hba)) { + /* Prevent gating in this path */ + hba->clk_gating.is_suspended = true; + if (ufshcd_is_link_hibern8(hba)) { + ret = ufshcd_uic_hibern8_exit(hba); + if (ret) + dev_err(hba->dev, "%s: hibern8 exit failed %d\n", + __func__, ret); + else + ufshcd_set_link_active(hba); + } + hba->clk_gating.is_suspended = false; + } +unblock_reqs: + ufshcd_scsi_unblock_requests(hba); +} + +/** + * ufshcd_hold - Enable clocks that were gated earlier due to ufshcd_release. + * Also, exit from hibern8 mode and set the link as active. + * @hba: per adapter instance + * @async: This indicates whether caller should ungate clocks asynchronously. + */ +int ufshcd_hold(struct ufs_hba *hba, bool async) +{ + int rc = 0; + bool flush_result; + unsigned long flags; + + if (!ufshcd_is_clkgating_allowed(hba) || + !hba->clk_gating.is_initialized) + goto out; + spin_lock_irqsave(hba->host->host_lock, flags); + hba->clk_gating.active_reqs++; + +start: + switch (hba->clk_gating.state) { + case CLKS_ON: + /* + * Wait for the ungate work to complete if in progress. + * Though the clocks may be in ON state, the link could + * still be in hibner8 state if hibern8 is allowed + * during clock gating. + * Make sure we exit hibern8 state also in addition to + * clocks being ON. + */ + if (ufshcd_can_hibern8_during_gating(hba) && + ufshcd_is_link_hibern8(hba)) { + if (async) { + rc = -EAGAIN; + hba->clk_gating.active_reqs--; + break; + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + flush_result = flush_work(&hba->clk_gating.ungate_work); + if (hba->clk_gating.is_suspended && !flush_result) + goto out; + spin_lock_irqsave(hba->host->host_lock, flags); + goto start; + } + break; + case REQ_CLKS_OFF: + if (cancel_delayed_work(&hba->clk_gating.gate_work)) { + hba->clk_gating.state = CLKS_ON; + trace_ufshcd_clk_gating(dev_name(hba->dev), + hba->clk_gating.state); + break; + } + /* + * If we are here, it means gating work is either done or + * currently running. Hence, fall through to cancel gating + * work and to enable clocks. + */ + fallthrough; + case CLKS_OFF: + hba->clk_gating.state = REQ_CLKS_ON; + trace_ufshcd_clk_gating(dev_name(hba->dev), + hba->clk_gating.state); + if (queue_work(hba->clk_gating.clk_gating_workq, + &hba->clk_gating.ungate_work)) + ufshcd_scsi_block_requests(hba); + /* + * fall through to check if we should wait for this + * work to be done or not. + */ + fallthrough; + case REQ_CLKS_ON: + if (async) { + rc = -EAGAIN; + hba->clk_gating.active_reqs--; + break; + } + + spin_unlock_irqrestore(hba->host->host_lock, flags); + flush_work(&hba->clk_gating.ungate_work); + /* Make sure state is CLKS_ON before returning */ + spin_lock_irqsave(hba->host->host_lock, flags); + goto start; + default: + dev_err(hba->dev, "%s: clk gating is in invalid state %d\n", + __func__, hba->clk_gating.state); + break; + } + spin_unlock_irqrestore(hba->host->host_lock, flags); +out: + return rc; +} +EXPORT_SYMBOL_GPL(ufshcd_hold); + +static void ufshcd_gate_work(struct work_struct *work) +{ + struct ufs_hba *hba = container_of(work, struct ufs_hba, + clk_gating.gate_work.work); + unsigned long flags; + int ret; + + spin_lock_irqsave(hba->host->host_lock, flags); + /* + * In case you are here to cancel this work the gating state + * would be marked as REQ_CLKS_ON. In this case save time by + * skipping the gating work and exit after changing the clock + * state to CLKS_ON. + */ + if (hba->clk_gating.is_suspended || + (hba->clk_gating.state != REQ_CLKS_OFF)) { + hba->clk_gating.state = CLKS_ON; + trace_ufshcd_clk_gating(dev_name(hba->dev), + hba->clk_gating.state); + goto rel_lock; + } + + if (hba->clk_gating.active_reqs + || hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL + || hba->outstanding_reqs || hba->outstanding_tasks + || hba->active_uic_cmd || hba->uic_async_done) + goto rel_lock; + + spin_unlock_irqrestore(hba->host->host_lock, flags); + + /* put the link into hibern8 mode before turning off clocks */ + if (ufshcd_can_hibern8_during_gating(hba)) { + ret = ufshcd_uic_hibern8_enter(hba); + if (ret) { + hba->clk_gating.state = CLKS_ON; + dev_err(hba->dev, "%s: hibern8 enter failed %d\n", + __func__, ret); + trace_ufshcd_clk_gating(dev_name(hba->dev), + hba->clk_gating.state); + goto out; + } + ufshcd_set_link_hibern8(hba); + } + + ufshcd_disable_irq(hba); + + ufshcd_setup_clocks(hba, false); + + /* Put the host controller in low power mode if possible */ + ufshcd_hba_vreg_set_lpm(hba); + /* + * In case you are here to cancel this work the gating state + * would be marked as REQ_CLKS_ON. In this case keep the state + * as REQ_CLKS_ON which would anyway imply that clocks are off + * and a request to turn them on is pending. By doing this way, + * we keep the state machine in tact and this would ultimately + * prevent from doing cancel work multiple times when there are + * new requests arriving before the current cancel work is done. + */ + spin_lock_irqsave(hba->host->host_lock, flags); + if (hba->clk_gating.state == REQ_CLKS_OFF) { + hba->clk_gating.state = CLKS_OFF; + trace_ufshcd_clk_gating(dev_name(hba->dev), + hba->clk_gating.state); + } +rel_lock: + spin_unlock_irqrestore(hba->host->host_lock, flags); +out: + return; +} + +/* host lock must be held before calling this variant */ +static void __ufshcd_release(struct ufs_hba *hba) +{ + if (!ufshcd_is_clkgating_allowed(hba)) + return; + + hba->clk_gating.active_reqs--; + + if (hba->clk_gating.active_reqs || hba->clk_gating.is_suspended || + hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL || + hba->outstanding_tasks || !hba->clk_gating.is_initialized || + hba->active_uic_cmd || hba->uic_async_done || + hba->clk_gating.state == CLKS_OFF) + return; + + hba->clk_gating.state = REQ_CLKS_OFF; + trace_ufshcd_clk_gating(dev_name(hba->dev), hba->clk_gating.state); + queue_delayed_work(hba->clk_gating.clk_gating_workq, + &hba->clk_gating.gate_work, + msecs_to_jiffies(hba->clk_gating.delay_ms)); +} + +void ufshcd_release(struct ufs_hba *hba) +{ + unsigned long flags; + + spin_lock_irqsave(hba->host->host_lock, flags); + __ufshcd_release(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); +} +EXPORT_SYMBOL_GPL(ufshcd_release); + +static ssize_t ufshcd_clkgate_delay_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%lu\n", hba->clk_gating.delay_ms); +} + +void ufshcd_clkgate_delay_set(struct device *dev, unsigned long value) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + unsigned long flags; + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->clk_gating.delay_ms = value; + spin_unlock_irqrestore(hba->host->host_lock, flags); +} +EXPORT_SYMBOL_GPL(ufshcd_clkgate_delay_set); + +static ssize_t ufshcd_clkgate_delay_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + unsigned long value; + + if (kstrtoul(buf, 0, &value)) + return -EINVAL; + + ufshcd_clkgate_delay_set(dev, value); + return count; +} + +static ssize_t ufshcd_clkgate_enable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%d\n", hba->clk_gating.is_enabled); +} + +static ssize_t ufshcd_clkgate_enable_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + unsigned long flags; + u32 value; + + if (kstrtou32(buf, 0, &value)) + return -EINVAL; + + value = !!value; + + spin_lock_irqsave(hba->host->host_lock, flags); + if (value == hba->clk_gating.is_enabled) + goto out; + + if (value) + __ufshcd_release(hba); + else + hba->clk_gating.active_reqs++; + + hba->clk_gating.is_enabled = value; +out: + spin_unlock_irqrestore(hba->host->host_lock, flags); + return count; +} + +static void ufshcd_init_clk_gating_sysfs(struct ufs_hba *hba) +{ + hba->clk_gating.delay_attr.show = ufshcd_clkgate_delay_show; + hba->clk_gating.delay_attr.store = ufshcd_clkgate_delay_store; + sysfs_attr_init(&hba->clk_gating.delay_attr.attr); + hba->clk_gating.delay_attr.attr.name = "clkgate_delay_ms"; + hba->clk_gating.delay_attr.attr.mode = 0644; + if (device_create_file(hba->dev, &hba->clk_gating.delay_attr)) + dev_err(hba->dev, "Failed to create sysfs for clkgate_delay\n"); + + hba->clk_gating.enable_attr.show = ufshcd_clkgate_enable_show; + hba->clk_gating.enable_attr.store = ufshcd_clkgate_enable_store; + sysfs_attr_init(&hba->clk_gating.enable_attr.attr); + hba->clk_gating.enable_attr.attr.name = "clkgate_enable"; + hba->clk_gating.enable_attr.attr.mode = 0644; + if (device_create_file(hba->dev, &hba->clk_gating.enable_attr)) + dev_err(hba->dev, "Failed to create sysfs for clkgate_enable\n"); +} + +static void ufshcd_remove_clk_gating_sysfs(struct ufs_hba *hba) +{ + if (hba->clk_gating.delay_attr.attr.name) + device_remove_file(hba->dev, &hba->clk_gating.delay_attr); + if (hba->clk_gating.enable_attr.attr.name) + device_remove_file(hba->dev, &hba->clk_gating.enable_attr); +} + +static void ufshcd_init_clk_gating(struct ufs_hba *hba) +{ + char wq_name[sizeof("ufs_clk_gating_00")]; + + if (!ufshcd_is_clkgating_allowed(hba)) + return; + + hba->clk_gating.state = CLKS_ON; + + hba->clk_gating.delay_ms = 150; + INIT_DELAYED_WORK(&hba->clk_gating.gate_work, ufshcd_gate_work); + INIT_WORK(&hba->clk_gating.ungate_work, ufshcd_ungate_work); + + snprintf(wq_name, ARRAY_SIZE(wq_name), "ufs_clk_gating_%d", + hba->host->host_no); + hba->clk_gating.clk_gating_workq = alloc_ordered_workqueue(wq_name, + WQ_MEM_RECLAIM | WQ_HIGHPRI); + + ufshcd_init_clk_gating_sysfs(hba); + + hba->clk_gating.is_enabled = true; + hba->clk_gating.is_initialized = true; +} + +static void ufshcd_exit_clk_gating(struct ufs_hba *hba) +{ + if (!hba->clk_gating.is_initialized) + return; + + ufshcd_remove_clk_gating_sysfs(hba); + + /* Ungate the clock if necessary. */ + ufshcd_hold(hba, false); + hba->clk_gating.is_initialized = false; + ufshcd_release(hba); + + destroy_workqueue(hba->clk_gating.clk_gating_workq); +} + +/* Must be called with host lock acquired */ +static void ufshcd_clk_scaling_start_busy(struct ufs_hba *hba) +{ + bool queue_resume_work = false; + ktime_t curr_t = ktime_get(); + unsigned long flags; + + if (!ufshcd_is_clkscaling_supported(hba)) + return; + + spin_lock_irqsave(hba->host->host_lock, flags); + if (!hba->clk_scaling.active_reqs++) + queue_resume_work = true; + + if (!hba->clk_scaling.is_enabled || hba->pm_op_in_progress) { + spin_unlock_irqrestore(hba->host->host_lock, flags); + return; + } + + if (queue_resume_work) + queue_work(hba->clk_scaling.workq, + &hba->clk_scaling.resume_work); + + if (!hba->clk_scaling.window_start_t) { + hba->clk_scaling.window_start_t = curr_t; + hba->clk_scaling.tot_busy_t = 0; + hba->clk_scaling.is_busy_started = false; + } + + if (!hba->clk_scaling.is_busy_started) { + hba->clk_scaling.busy_start_t = curr_t; + hba->clk_scaling.is_busy_started = true; + } + spin_unlock_irqrestore(hba->host->host_lock, flags); +} + +static void ufshcd_clk_scaling_update_busy(struct ufs_hba *hba) +{ + struct ufs_clk_scaling *scaling = &hba->clk_scaling; + unsigned long flags; + + if (!ufshcd_is_clkscaling_supported(hba)) + return; + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->clk_scaling.active_reqs--; + if (!hba->outstanding_reqs && scaling->is_busy_started) { + scaling->tot_busy_t += ktime_to_us(ktime_sub(ktime_get(), + scaling->busy_start_t)); + scaling->busy_start_t = 0; + scaling->is_busy_started = false; + } + spin_unlock_irqrestore(hba->host->host_lock, flags); +} + +static inline int ufshcd_monitor_opcode2dir(u8 opcode) +{ + if (opcode == READ_6 || opcode == READ_10 || opcode == READ_16) + return READ; + else if (opcode == WRITE_6 || opcode == WRITE_10 || opcode == WRITE_16) + return WRITE; + else + return -EINVAL; +} + +static inline bool ufshcd_should_inform_monitor(struct ufs_hba *hba, + struct ufshcd_lrb *lrbp) +{ + const struct ufs_hba_monitor *m = &hba->monitor; + + return (m->enabled && lrbp && lrbp->cmd && + (!m->chunk_size || m->chunk_size == lrbp->cmd->sdb.length) && + ktime_before(hba->monitor.enabled_ts, lrbp->issue_time_stamp)); +} + +static void ufshcd_start_monitor(struct ufs_hba *hba, + const struct ufshcd_lrb *lrbp) +{ + int dir = ufshcd_monitor_opcode2dir(*lrbp->cmd->cmnd); + unsigned long flags; + + spin_lock_irqsave(hba->host->host_lock, flags); + if (dir >= 0 && hba->monitor.nr_queued[dir]++ == 0) + hba->monitor.busy_start_ts[dir] = ktime_get(); + spin_unlock_irqrestore(hba->host->host_lock, flags); +} + +static void ufshcd_update_monitor(struct ufs_hba *hba, const struct ufshcd_lrb *lrbp) +{ + int dir = ufshcd_monitor_opcode2dir(*lrbp->cmd->cmnd); + unsigned long flags; + + spin_lock_irqsave(hba->host->host_lock, flags); + if (dir >= 0 && hba->monitor.nr_queued[dir] > 0) { + const struct request *req = scsi_cmd_to_rq(lrbp->cmd); + struct ufs_hba_monitor *m = &hba->monitor; + ktime_t now, inc, lat; + + now = lrbp->compl_time_stamp; + inc = ktime_sub(now, m->busy_start_ts[dir]); + m->total_busy[dir] = ktime_add(m->total_busy[dir], inc); + m->nr_sec_rw[dir] += blk_rq_sectors(req); + + /* Update latencies */ + m->nr_req[dir]++; + lat = ktime_sub(now, lrbp->issue_time_stamp); + m->lat_sum[dir] += lat; + if (m->lat_max[dir] < lat || !m->lat_max[dir]) + m->lat_max[dir] = lat; + if (m->lat_min[dir] > lat || !m->lat_min[dir]) + m->lat_min[dir] = lat; + + m->nr_queued[dir]--; + /* Push forward the busy start of monitor */ + m->busy_start_ts[dir] = now; + } + spin_unlock_irqrestore(hba->host->host_lock, flags); +} + +/** + * ufshcd_send_command - Send SCSI or device management commands + * @hba: per adapter instance + * @task_tag: Task tag of the command + */ +static inline +void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag) +{ + struct ufshcd_lrb *lrbp = &hba->lrb[task_tag]; + unsigned long flags; + + lrbp->issue_time_stamp = ktime_get(); + lrbp->issue_time_stamp_local_clock = local_clock(); + lrbp->compl_time_stamp = ktime_set(0, 0); + lrbp->compl_time_stamp_local_clock = 0; + ufshcd_add_command_trace(hba, task_tag, UFS_CMD_SEND); + ufshcd_clk_scaling_start_busy(hba); + if (unlikely(ufshcd_should_inform_monitor(hba, lrbp))) + ufshcd_start_monitor(hba, lrbp); + + spin_lock_irqsave(&hba->outstanding_lock, flags); + if (hba->vops && hba->vops->setup_xfer_req) + hba->vops->setup_xfer_req(hba, task_tag, !!lrbp->cmd); + __set_bit(task_tag, &hba->outstanding_reqs); + ufshcd_writel(hba, 1 << task_tag, REG_UTP_TRANSFER_REQ_DOOR_BELL); + spin_unlock_irqrestore(&hba->outstanding_lock, flags); +} + +/** + * ufshcd_copy_sense_data - Copy sense data in case of check condition + * @lrbp: pointer to local reference block + */ +static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp) +{ + u8 *const sense_buffer = lrbp->cmd->sense_buffer; + int len; + + if (sense_buffer && + ufshcd_get_rsp_upiu_data_seg_len(lrbp->ucd_rsp_ptr)) { + int len_to_copy; + + len = be16_to_cpu(lrbp->ucd_rsp_ptr->sr.sense_data_len); + len_to_copy = min_t(int, UFS_SENSE_SIZE, len); + + memcpy(sense_buffer, lrbp->ucd_rsp_ptr->sr.sense_data, + len_to_copy); + } +} + +/** + * ufshcd_copy_query_response() - Copy the Query Response and the data + * descriptor + * @hba: per adapter instance + * @lrbp: pointer to local reference block + */ +static +int ufshcd_copy_query_response(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) +{ + struct ufs_query_res *query_res = &hba->dev_cmd.query.response; + + memcpy(&query_res->upiu_res, &lrbp->ucd_rsp_ptr->qr, QUERY_OSF_SIZE); + + /* Get the descriptor */ + if (hba->dev_cmd.query.descriptor && + lrbp->ucd_rsp_ptr->qr.opcode == UPIU_QUERY_OPCODE_READ_DESC) { + u8 *descp = (u8 *)lrbp->ucd_rsp_ptr + + GENERAL_UPIU_REQUEST_SIZE; + u16 resp_len; + u16 buf_len; + + /* data segment length */ + resp_len = be32_to_cpu(lrbp->ucd_rsp_ptr->header.dword_2) & + MASK_QUERY_DATA_SEG_LEN; + buf_len = be16_to_cpu( + hba->dev_cmd.query.request.upiu_req.length); + if (likely(buf_len >= resp_len)) { + memcpy(hba->dev_cmd.query.descriptor, descp, resp_len); + } else { + dev_warn(hba->dev, + "%s: rsp size %d is bigger than buffer size %d", + __func__, resp_len, buf_len); + return -EINVAL; + } + } + + return 0; +} + +/** + * ufshcd_hba_capabilities - Read controller capabilities + * @hba: per adapter instance + * + * Return: 0 on success, negative on error. + */ +static inline int ufshcd_hba_capabilities(struct ufs_hba *hba) +{ + int err; + + hba->capabilities = ufshcd_readl(hba, REG_CONTROLLER_CAPABILITIES); + if (hba->quirks & UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS) + hba->capabilities &= ~MASK_64_ADDRESSING_SUPPORT; + + /* nutrs and nutmrs are 0 based values */ + hba->nutrs = (hba->capabilities & MASK_TRANSFER_REQUESTS_SLOTS) + 1; + hba->nutmrs = + ((hba->capabilities & MASK_TASK_MANAGEMENT_REQUEST_SLOTS) >> 16) + 1; + hba->reserved_slot = hba->nutrs - 1; + + /* Read crypto capabilities */ + err = ufshcd_hba_init_crypto_capabilities(hba); + if (err) + dev_err(hba->dev, "crypto setup failed\n"); + + return err; +} + +/** + * ufshcd_ready_for_uic_cmd - Check if controller is ready + * to accept UIC commands + * @hba: per adapter instance + * Return true on success, else false + */ +static inline bool ufshcd_ready_for_uic_cmd(struct ufs_hba *hba) +{ + u32 val; + int ret = read_poll_timeout(ufshcd_readl, val, val & UIC_COMMAND_READY, + 500, UIC_CMD_TIMEOUT * 1000, false, hba, + REG_CONTROLLER_STATUS); + return ret == 0 ? true : false; +} + +/** + * ufshcd_get_upmcrs - Get the power mode change request status + * @hba: Pointer to adapter instance + * + * This function gets the UPMCRS field of HCS register + * Returns value of UPMCRS field + */ +static inline u8 ufshcd_get_upmcrs(struct ufs_hba *hba) +{ + return (ufshcd_readl(hba, REG_CONTROLLER_STATUS) >> 8) & 0x7; +} + +/** + * ufshcd_dispatch_uic_cmd - Dispatch an UIC command to the Unipro layer + * @hba: per adapter instance + * @uic_cmd: UIC command + */ +static inline void +ufshcd_dispatch_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) +{ + lockdep_assert_held(&hba->uic_cmd_mutex); + + WARN_ON(hba->active_uic_cmd); + + hba->active_uic_cmd = uic_cmd; + + /* Write Args */ + ufshcd_writel(hba, uic_cmd->argument1, REG_UIC_COMMAND_ARG_1); + ufshcd_writel(hba, uic_cmd->argument2, REG_UIC_COMMAND_ARG_2); + ufshcd_writel(hba, uic_cmd->argument3, REG_UIC_COMMAND_ARG_3); + + ufshcd_add_uic_command_trace(hba, uic_cmd, UFS_CMD_SEND); + + /* Write UIC Cmd */ + ufshcd_writel(hba, uic_cmd->command & COMMAND_OPCODE_MASK, + REG_UIC_COMMAND); +} + +/** + * ufshcd_wait_for_uic_cmd - Wait for completion of an UIC command + * @hba: per adapter instance + * @uic_cmd: UIC command + * + * Returns 0 only if success. + */ +static int +ufshcd_wait_for_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) +{ + int ret; + unsigned long flags; + + lockdep_assert_held(&hba->uic_cmd_mutex); + + if (wait_for_completion_timeout(&uic_cmd->done, + msecs_to_jiffies(UIC_CMD_TIMEOUT))) { + ret = uic_cmd->argument2 & MASK_UIC_COMMAND_RESULT; + } else { + ret = -ETIMEDOUT; + dev_err(hba->dev, + "uic cmd 0x%x with arg3 0x%x completion timeout\n", + uic_cmd->command, uic_cmd->argument3); + + if (!uic_cmd->cmd_active) { + dev_err(hba->dev, "%s: UIC cmd has been completed, return the result\n", + __func__); + ret = uic_cmd->argument2 & MASK_UIC_COMMAND_RESULT; + } + } + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->active_uic_cmd = NULL; + spin_unlock_irqrestore(hba->host->host_lock, flags); + + return ret; +} + +/** + * __ufshcd_send_uic_cmd - Send UIC commands and retrieve the result + * @hba: per adapter instance + * @uic_cmd: UIC command + * @completion: initialize the completion only if this is set to true + * + * Returns 0 only if success. + */ +static int +__ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd, + bool completion) +{ + lockdep_assert_held(&hba->uic_cmd_mutex); + + if (!ufshcd_ready_for_uic_cmd(hba)) { + dev_err(hba->dev, + "Controller not ready to accept UIC commands\n"); + return -EIO; + } + + if (completion) + init_completion(&uic_cmd->done); + + uic_cmd->cmd_active = 1; + ufshcd_dispatch_uic_cmd(hba, uic_cmd); + + return 0; +} + +/** + * ufshcd_send_uic_cmd - Send UIC commands and retrieve the result + * @hba: per adapter instance + * @uic_cmd: UIC command + * + * Returns 0 only if success. + */ +int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) +{ + int ret; + + if (hba->quirks & UFSHCD_QUIRK_BROKEN_UIC_CMD) + return 0; + + ufshcd_hold(hba, false); + mutex_lock(&hba->uic_cmd_mutex); + ufshcd_add_delay_before_dme_cmd(hba); + + ret = __ufshcd_send_uic_cmd(hba, uic_cmd, true); + if (!ret) + ret = ufshcd_wait_for_uic_cmd(hba, uic_cmd); + + mutex_unlock(&hba->uic_cmd_mutex); + + ufshcd_release(hba); + return ret; +} + +/** + * ufshcd_map_sg - Map scatter-gather list to prdt + * @hba: per adapter instance + * @lrbp: pointer to local reference block + * + * Returns 0 in case of success, non-zero value in case of failure + */ +static int ufshcd_map_sg(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) +{ + struct ufshcd_sg_entry *prd_table; + struct scatterlist *sg; + struct scsi_cmnd *cmd; + int sg_segments; + int i; + + cmd = lrbp->cmd; + sg_segments = scsi_dma_map(cmd); + if (sg_segments < 0) + return sg_segments; + + if (sg_segments) { + + if (hba->quirks & UFSHCD_QUIRK_PRDT_BYTE_GRAN) + lrbp->utr_descriptor_ptr->prd_table_length = + cpu_to_le16((sg_segments * + sizeof(struct ufshcd_sg_entry))); + else + lrbp->utr_descriptor_ptr->prd_table_length = + cpu_to_le16(sg_segments); + + prd_table = lrbp->ucd_prdt_ptr; + + scsi_for_each_sg(cmd, sg, sg_segments, i) { + const unsigned int len = sg_dma_len(sg); + + /* + * From the UFSHCI spec: "Data Byte Count (DBC): A '0' + * based value that indicates the length, in bytes, of + * the data block. A maximum of length of 256KB may + * exist for any entry. Bits 1:0 of this field shall be + * 11b to indicate Dword granularity. A value of '3' + * indicates 4 bytes, '7' indicates 8 bytes, etc." + */ + WARN_ONCE(len > 256 * 1024, "len = %#x\n", len); + prd_table[i].size = cpu_to_le32(len - 1); + prd_table[i].addr = cpu_to_le64(sg->dma_address); + prd_table[i].reserved = 0; + } + } else { + lrbp->utr_descriptor_ptr->prd_table_length = 0; + } + + return 0; +} + +/** + * ufshcd_enable_intr - enable interrupts + * @hba: per adapter instance + * @intrs: interrupt bits + */ +static void ufshcd_enable_intr(struct ufs_hba *hba, u32 intrs) +{ + u32 set = ufshcd_readl(hba, REG_INTERRUPT_ENABLE); + + if (hba->ufs_version == ufshci_version(1, 0)) { + u32 rw; + rw = set & INTERRUPT_MASK_RW_VER_10; + set = rw | ((set ^ intrs) & intrs); + } else { + set |= intrs; + } + + ufshcd_writel(hba, set, REG_INTERRUPT_ENABLE); +} + +/** + * ufshcd_disable_intr - disable interrupts + * @hba: per adapter instance + * @intrs: interrupt bits + */ +static void ufshcd_disable_intr(struct ufs_hba *hba, u32 intrs) +{ + u32 set = ufshcd_readl(hba, REG_INTERRUPT_ENABLE); + + if (hba->ufs_version == ufshci_version(1, 0)) { + u32 rw; + rw = (set & INTERRUPT_MASK_RW_VER_10) & + ~(intrs & INTERRUPT_MASK_RW_VER_10); + set = rw | ((set & intrs) & ~INTERRUPT_MASK_RW_VER_10); + + } else { + set &= ~intrs; + } + + ufshcd_writel(hba, set, REG_INTERRUPT_ENABLE); +} + +/** + * ufshcd_prepare_req_desc_hdr() - Fills the requests header + * descriptor according to request + * @lrbp: pointer to local reference block + * @upiu_flags: flags required in the header + * @cmd_dir: requests data direction + */ +static void ufshcd_prepare_req_desc_hdr(struct ufshcd_lrb *lrbp, + u8 *upiu_flags, enum dma_data_direction cmd_dir) +{ + struct utp_transfer_req_desc *req_desc = lrbp->utr_descriptor_ptr; + u32 data_direction; + u32 dword_0; + u32 dword_1 = 0; + u32 dword_3 = 0; + + if (cmd_dir == DMA_FROM_DEVICE) { + data_direction = UTP_DEVICE_TO_HOST; + *upiu_flags = UPIU_CMD_FLAGS_READ; + } else if (cmd_dir == DMA_TO_DEVICE) { + data_direction = UTP_HOST_TO_DEVICE; + *upiu_flags = UPIU_CMD_FLAGS_WRITE; + } else { + data_direction = UTP_NO_DATA_TRANSFER; + *upiu_flags = UPIU_CMD_FLAGS_NONE; + } + + dword_0 = data_direction | (lrbp->command_type + << UPIU_COMMAND_TYPE_OFFSET); + if (lrbp->intr_cmd) + dword_0 |= UTP_REQ_DESC_INT_CMD; + + /* Prepare crypto related dwords */ + ufshcd_prepare_req_desc_hdr_crypto(lrbp, &dword_0, &dword_1, &dword_3); + + /* Transfer request descriptor header fields */ + req_desc->header.dword_0 = cpu_to_le32(dword_0); + req_desc->header.dword_1 = cpu_to_le32(dword_1); + /* + * assigning invalid value for command status. Controller + * updates OCS on command completion, with the command + * status + */ + req_desc->header.dword_2 = + cpu_to_le32(OCS_INVALID_COMMAND_STATUS); + req_desc->header.dword_3 = cpu_to_le32(dword_3); + + req_desc->prd_table_length = 0; +} + +/** + * ufshcd_prepare_utp_scsi_cmd_upiu() - fills the utp_transfer_req_desc, + * for scsi commands + * @lrbp: local reference block pointer + * @upiu_flags: flags + */ +static +void ufshcd_prepare_utp_scsi_cmd_upiu(struct ufshcd_lrb *lrbp, u8 upiu_flags) +{ + struct scsi_cmnd *cmd = lrbp->cmd; + struct utp_upiu_req *ucd_req_ptr = lrbp->ucd_req_ptr; + unsigned short cdb_len; + + /* command descriptor fields */ + ucd_req_ptr->header.dword_0 = UPIU_HEADER_DWORD( + UPIU_TRANSACTION_COMMAND, upiu_flags, + lrbp->lun, lrbp->task_tag); + ucd_req_ptr->header.dword_1 = UPIU_HEADER_DWORD( + UPIU_COMMAND_SET_TYPE_SCSI, 0, 0, 0); + + /* Total EHS length and Data segment length will be zero */ + ucd_req_ptr->header.dword_2 = 0; + + ucd_req_ptr->sc.exp_data_transfer_len = cpu_to_be32(cmd->sdb.length); + + cdb_len = min_t(unsigned short, cmd->cmd_len, UFS_CDB_SIZE); + memset(ucd_req_ptr->sc.cdb, 0, UFS_CDB_SIZE); + memcpy(ucd_req_ptr->sc.cdb, cmd->cmnd, cdb_len); + + memset(lrbp->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp)); +} + +/** + * ufshcd_prepare_utp_query_req_upiu() - fills the utp_transfer_req_desc, + * for query requsts + * @hba: UFS hba + * @lrbp: local reference block pointer + * @upiu_flags: flags + */ +static void ufshcd_prepare_utp_query_req_upiu(struct ufs_hba *hba, + struct ufshcd_lrb *lrbp, u8 upiu_flags) +{ + struct utp_upiu_req *ucd_req_ptr = lrbp->ucd_req_ptr; + struct ufs_query *query = &hba->dev_cmd.query; + u16 len = be16_to_cpu(query->request.upiu_req.length); + + /* Query request header */ + ucd_req_ptr->header.dword_0 = UPIU_HEADER_DWORD( + UPIU_TRANSACTION_QUERY_REQ, upiu_flags, + lrbp->lun, lrbp->task_tag); + ucd_req_ptr->header.dword_1 = UPIU_HEADER_DWORD( + 0, query->request.query_func, 0, 0); + + /* Data segment length only need for WRITE_DESC */ + if (query->request.upiu_req.opcode == UPIU_QUERY_OPCODE_WRITE_DESC) + ucd_req_ptr->header.dword_2 = + UPIU_HEADER_DWORD(0, 0, (len >> 8), (u8)len); + else + ucd_req_ptr->header.dword_2 = 0; + + /* Copy the Query Request buffer as is */ + memcpy(&ucd_req_ptr->qr, &query->request.upiu_req, + QUERY_OSF_SIZE); + + /* Copy the Descriptor */ + if (query->request.upiu_req.opcode == UPIU_QUERY_OPCODE_WRITE_DESC) + memcpy(ucd_req_ptr + 1, query->descriptor, len); + + memset(lrbp->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp)); +} + +static inline void ufshcd_prepare_utp_nop_upiu(struct ufshcd_lrb *lrbp) +{ + struct utp_upiu_req *ucd_req_ptr = lrbp->ucd_req_ptr; + + memset(ucd_req_ptr, 0, sizeof(struct utp_upiu_req)); + + /* command descriptor fields */ + ucd_req_ptr->header.dword_0 = + UPIU_HEADER_DWORD( + UPIU_TRANSACTION_NOP_OUT, 0, 0, lrbp->task_tag); + /* clear rest of the fields of basic header */ + ucd_req_ptr->header.dword_1 = 0; + ucd_req_ptr->header.dword_2 = 0; + + memset(lrbp->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp)); +} + +/** + * ufshcd_compose_devman_upiu - UFS Protocol Information Unit(UPIU) + * for Device Management Purposes + * @hba: per adapter instance + * @lrbp: pointer to local reference block + */ +static int ufshcd_compose_devman_upiu(struct ufs_hba *hba, + struct ufshcd_lrb *lrbp) +{ + u8 upiu_flags; + int ret = 0; + + if (hba->ufs_version <= ufshci_version(1, 1)) + lrbp->command_type = UTP_CMD_TYPE_DEV_MANAGE; + else + lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE; + + ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE); + if (hba->dev_cmd.type == DEV_CMD_TYPE_QUERY) + ufshcd_prepare_utp_query_req_upiu(hba, lrbp, upiu_flags); + else if (hba->dev_cmd.type == DEV_CMD_TYPE_NOP) + ufshcd_prepare_utp_nop_upiu(lrbp); + else + ret = -EINVAL; + + return ret; +} + +/** + * ufshcd_comp_scsi_upiu - UFS Protocol Information Unit(UPIU) + * for SCSI Purposes + * @hba: per adapter instance + * @lrbp: pointer to local reference block + */ +static int ufshcd_comp_scsi_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) +{ + u8 upiu_flags; + int ret = 0; + + if (hba->ufs_version <= ufshci_version(1, 1)) + lrbp->command_type = UTP_CMD_TYPE_SCSI; + else + lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE; + + if (likely(lrbp->cmd)) { + ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, + lrbp->cmd->sc_data_direction); + ufshcd_prepare_utp_scsi_cmd_upiu(lrbp, upiu_flags); + } else { + ret = -EINVAL; + } + + return ret; +} + +/** + * ufshcd_upiu_wlun_to_scsi_wlun - maps UPIU W-LUN id to SCSI W-LUN ID + * @upiu_wlun_id: UPIU W-LUN id + * + * Returns SCSI W-LUN id + */ +static inline u16 ufshcd_upiu_wlun_to_scsi_wlun(u8 upiu_wlun_id) +{ + return (upiu_wlun_id & ~UFS_UPIU_WLUN_ID) | SCSI_W_LUN_BASE; +} + +static inline bool is_device_wlun(struct scsi_device *sdev) +{ + return sdev->lun == + ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_UFS_DEVICE_WLUN); +} + +/* + * Associate the UFS controller queue with the default and poll HCTX types. + * Initialize the mq_map[] arrays. + */ +static void ufshcd_map_queues(struct Scsi_Host *shost) +{ + int i; + + for (i = 0; i < shost->nr_maps; i++) { + struct blk_mq_queue_map *map = &shost->tag_set.map[i]; + + switch (i) { + case HCTX_TYPE_DEFAULT: + case HCTX_TYPE_POLL: + map->nr_queues = 1; + break; + case HCTX_TYPE_READ: + map->nr_queues = 0; + continue; + default: + WARN_ON_ONCE(true); + } + map->queue_offset = 0; + blk_mq_map_queues(map); + } +} + +static void ufshcd_init_lrb(struct ufs_hba *hba, struct ufshcd_lrb *lrb, int i) +{ + struct utp_transfer_cmd_desc *cmd_descp = hba->ucdl_base_addr; + struct utp_transfer_req_desc *utrdlp = hba->utrdl_base_addr; + dma_addr_t cmd_desc_element_addr = hba->ucdl_dma_addr + + i * sizeof(struct utp_transfer_cmd_desc); + u16 response_offset = offsetof(struct utp_transfer_cmd_desc, + response_upiu); + u16 prdt_offset = offsetof(struct utp_transfer_cmd_desc, prd_table); + + lrb->utr_descriptor_ptr = utrdlp + i; + lrb->utrd_dma_addr = hba->utrdl_dma_addr + + i * sizeof(struct utp_transfer_req_desc); + lrb->ucd_req_ptr = (struct utp_upiu_req *)(cmd_descp + i); + lrb->ucd_req_dma_addr = cmd_desc_element_addr; + lrb->ucd_rsp_ptr = (struct utp_upiu_rsp *)cmd_descp[i].response_upiu; + lrb->ucd_rsp_dma_addr = cmd_desc_element_addr + response_offset; + lrb->ucd_prdt_ptr = cmd_descp[i].prd_table; + lrb->ucd_prdt_dma_addr = cmd_desc_element_addr + prdt_offset; +} + +/** + * ufshcd_queuecommand - main entry point for SCSI requests + * @host: SCSI host pointer + * @cmd: command from SCSI Midlayer + * + * Returns 0 for success, non-zero in case of failure + */ +static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) +{ + struct ufs_hba *hba = shost_priv(host); + int tag = scsi_cmd_to_rq(cmd)->tag; + struct ufshcd_lrb *lrbp; + int err = 0; + + WARN_ONCE(tag < 0 || tag >= hba->nutrs, "Invalid tag %d\n", tag); + + /* + * Allows the UFS error handler to wait for prior ufshcd_queuecommand() + * calls. + */ + rcu_read_lock(); + + switch (hba->ufshcd_state) { + case UFSHCD_STATE_OPERATIONAL: + break; + case UFSHCD_STATE_EH_SCHEDULED_NON_FATAL: + /* + * SCSI error handler can call ->queuecommand() while UFS error + * handler is in progress. Error interrupts could change the + * state from UFSHCD_STATE_RESET to + * UFSHCD_STATE_EH_SCHEDULED_NON_FATAL. Prevent requests + * being issued in that case. + */ + if (ufshcd_eh_in_progress(hba)) { + err = SCSI_MLQUEUE_HOST_BUSY; + goto out; + } + break; + case UFSHCD_STATE_EH_SCHEDULED_FATAL: + /* + * pm_runtime_get_sync() is used at error handling preparation + * stage. If a scsi cmd, e.g. the SSU cmd, is sent from hba's + * PM ops, it can never be finished if we let SCSI layer keep + * retrying it, which gets err handler stuck forever. Neither + * can we let the scsi cmd pass through, because UFS is in bad + * state, the scsi cmd may eventually time out, which will get + * err handler blocked for too long. So, just fail the scsi cmd + * sent from PM ops, err handler can recover PM error anyways. + */ + if (hba->pm_op_in_progress) { + hba->force_reset = true; + set_host_byte(cmd, DID_BAD_TARGET); + scsi_done(cmd); + goto out; + } + fallthrough; + case UFSHCD_STATE_RESET: + err = SCSI_MLQUEUE_HOST_BUSY; + goto out; + case UFSHCD_STATE_ERROR: + set_host_byte(cmd, DID_ERROR); + scsi_done(cmd); + goto out; + } + + hba->req_abort_count = 0; + + err = ufshcd_hold(hba, true); + if (err) { + err = SCSI_MLQUEUE_HOST_BUSY; + goto out; + } + WARN_ON(ufshcd_is_clkgating_allowed(hba) && + (hba->clk_gating.state != CLKS_ON)); + + lrbp = &hba->lrb[tag]; + WARN_ON(lrbp->cmd); + lrbp->cmd = cmd; + lrbp->task_tag = tag; + lrbp->lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun); + lrbp->intr_cmd = !ufshcd_is_intr_aggr_allowed(hba); + + ufshcd_prepare_lrbp_crypto(scsi_cmd_to_rq(cmd), lrbp); + + lrbp->req_abort_skip = false; + + ufshpb_prep(hba, lrbp); + + ufshcd_comp_scsi_upiu(hba, lrbp); + + err = ufshcd_map_sg(hba, lrbp); + if (err) { + lrbp->cmd = NULL; + ufshcd_release(hba); + goto out; + } + + ufshcd_send_command(hba, tag); + +out: + rcu_read_unlock(); + + if (ufs_trigger_eh()) { + unsigned long flags; + + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_schedule_eh_work(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + } + + return err; +} + +static int ufshcd_compose_dev_cmd(struct ufs_hba *hba, + struct ufshcd_lrb *lrbp, enum dev_cmd_type cmd_type, int tag) +{ + lrbp->cmd = NULL; + lrbp->task_tag = tag; + lrbp->lun = 0; /* device management cmd is not specific to any LUN */ + lrbp->intr_cmd = true; /* No interrupt aggregation */ + ufshcd_prepare_lrbp_crypto(NULL, lrbp); + hba->dev_cmd.type = cmd_type; + + return ufshcd_compose_devman_upiu(hba, lrbp); +} + +/* + * Clear all the requests from the controller for which a bit has been set in + * @mask and wait until the controller confirms that these requests have been + * cleared. + */ +static int ufshcd_clear_cmds(struct ufs_hba *hba, u32 mask) +{ + unsigned long flags; + + /* clear outstanding transaction before retry */ + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_utrl_clear(hba, mask); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + /* + * wait for h/w to clear corresponding bit in door-bell. + * max. wait is 1 sec. + */ + return ufshcd_wait_for_register(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL, + mask, ~mask, 1000, 1000); +} + +static int +ufshcd_check_query_response(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) +{ + struct ufs_query_res *query_res = &hba->dev_cmd.query.response; + + /* Get the UPIU response */ + query_res->response = ufshcd_get_rsp_upiu_result(lrbp->ucd_rsp_ptr) >> + UPIU_RSP_CODE_OFFSET; + return query_res->response; +} + +/** + * ufshcd_dev_cmd_completion() - handles device management command responses + * @hba: per adapter instance + * @lrbp: pointer to local reference block + */ +static int +ufshcd_dev_cmd_completion(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) +{ + int resp; + int err = 0; + + hba->ufs_stats.last_hibern8_exit_tstamp = ktime_set(0, 0); + resp = ufshcd_get_req_rsp(lrbp->ucd_rsp_ptr); + + switch (resp) { + case UPIU_TRANSACTION_NOP_IN: + if (hba->dev_cmd.type != DEV_CMD_TYPE_NOP) { + err = -EINVAL; + dev_err(hba->dev, "%s: unexpected response %x\n", + __func__, resp); + } + break; + case UPIU_TRANSACTION_QUERY_RSP: + err = ufshcd_check_query_response(hba, lrbp); + if (!err) + err = ufshcd_copy_query_response(hba, lrbp); + break; + case UPIU_TRANSACTION_REJECT_UPIU: + /* TODO: handle Reject UPIU Response */ + err = -EPERM; + dev_err(hba->dev, "%s: Reject UPIU not fully implemented\n", + __func__); + break; + default: + err = -EINVAL; + dev_err(hba->dev, "%s: Invalid device management cmd response: %x\n", + __func__, resp); + break; + } + + return err; +} + +static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba, + struct ufshcd_lrb *lrbp, int max_timeout) +{ + unsigned long time_left = msecs_to_jiffies(max_timeout); + unsigned long flags; + bool pending; + int err; + +retry: + time_left = wait_for_completion_timeout(hba->dev_cmd.complete, + time_left); + + if (likely(time_left)) { + /* + * The completion handler called complete() and the caller of + * this function still owns the @lrbp tag so the code below does + * not trigger any race conditions. + */ + hba->dev_cmd.complete = NULL; + err = ufshcd_get_tr_ocs(lrbp); + if (!err) + err = ufshcd_dev_cmd_completion(hba, lrbp); + } else { + err = -ETIMEDOUT; + dev_dbg(hba->dev, "%s: dev_cmd request timedout, tag %d\n", + __func__, lrbp->task_tag); + if (ufshcd_clear_cmds(hba, 1U << lrbp->task_tag) == 0) { + /* successfully cleared the command, retry if needed */ + err = -EAGAIN; + /* + * Since clearing the command succeeded we also need to + * clear the task tag bit from the outstanding_reqs + * variable. + */ + spin_lock_irqsave(&hba->outstanding_lock, flags); + pending = test_bit(lrbp->task_tag, + &hba->outstanding_reqs); + if (pending) { + hba->dev_cmd.complete = NULL; + __clear_bit(lrbp->task_tag, + &hba->outstanding_reqs); + } + spin_unlock_irqrestore(&hba->outstanding_lock, flags); + + if (!pending) { + /* + * The completion handler ran while we tried to + * clear the command. + */ + time_left = 1; + goto retry; + } + } else { + dev_err(hba->dev, "%s: failed to clear tag %d\n", + __func__, lrbp->task_tag); + + spin_lock_irqsave(&hba->outstanding_lock, flags); + pending = test_bit(lrbp->task_tag, + &hba->outstanding_reqs); + if (pending) + hba->dev_cmd.complete = NULL; + spin_unlock_irqrestore(&hba->outstanding_lock, flags); + + if (!pending) { + /* + * The completion handler ran while we tried to + * clear the command. + */ + time_left = 1; + goto retry; + } + } + } + + return err; +} + +/** + * ufshcd_exec_dev_cmd - API for sending device management requests + * @hba: UFS hba + * @cmd_type: specifies the type (NOP, Query...) + * @timeout: timeout in milliseconds + * + * NOTE: Since there is only one available tag for device management commands, + * it is expected you hold the hba->dev_cmd.lock mutex. + */ +static int ufshcd_exec_dev_cmd(struct ufs_hba *hba, + enum dev_cmd_type cmd_type, int timeout) +{ + DECLARE_COMPLETION_ONSTACK(wait); + const u32 tag = hba->reserved_slot; + struct ufshcd_lrb *lrbp; + int err; + + /* Protects use of hba->reserved_slot. */ + lockdep_assert_held(&hba->dev_cmd.lock); + + down_read(&hba->clk_scaling_lock); + + lrbp = &hba->lrb[tag]; + WARN_ON(lrbp->cmd); + err = ufshcd_compose_dev_cmd(hba, lrbp, cmd_type, tag); + if (unlikely(err)) + goto out; + + hba->dev_cmd.complete = &wait; + + ufshcd_add_query_upiu_trace(hba, UFS_QUERY_SEND, lrbp->ucd_req_ptr); + + ufshcd_send_command(hba, tag); + err = ufshcd_wait_for_dev_cmd(hba, lrbp, timeout); + ufshcd_add_query_upiu_trace(hba, err ? UFS_QUERY_ERR : UFS_QUERY_COMP, + (struct utp_upiu_req *)lrbp->ucd_rsp_ptr); + +out: + up_read(&hba->clk_scaling_lock); + return err; +} + +/** + * ufshcd_init_query() - init the query response and request parameters + * @hba: per-adapter instance + * @request: address of the request pointer to be initialized + * @response: address of the response pointer to be initialized + * @opcode: operation to perform + * @idn: flag idn to access + * @index: LU number to access + * @selector: query/flag/descriptor further identification + */ +static inline void ufshcd_init_query(struct ufs_hba *hba, + struct ufs_query_req **request, struct ufs_query_res **response, + enum query_opcode opcode, u8 idn, u8 index, u8 selector) +{ + *request = &hba->dev_cmd.query.request; + *response = &hba->dev_cmd.query.response; + memset(*request, 0, sizeof(struct ufs_query_req)); + memset(*response, 0, sizeof(struct ufs_query_res)); + (*request)->upiu_req.opcode = opcode; + (*request)->upiu_req.idn = idn; + (*request)->upiu_req.index = index; + (*request)->upiu_req.selector = selector; +} + +static int ufshcd_query_flag_retry(struct ufs_hba *hba, + enum query_opcode opcode, enum flag_idn idn, u8 index, bool *flag_res) +{ + int ret; + int retries; + + for (retries = 0; retries < QUERY_REQ_RETRIES; retries++) { + ret = ufshcd_query_flag(hba, opcode, idn, index, flag_res); + if (ret) + dev_dbg(hba->dev, + "%s: failed with error %d, retries %d\n", + __func__, ret, retries); + else + break; + } + + if (ret) + dev_err(hba->dev, + "%s: query flag, opcode %d, idn %d, failed with error %d after %d retries\n", + __func__, opcode, idn, ret, retries); + return ret; +} + +/** + * ufshcd_query_flag() - API function for sending flag query requests + * @hba: per-adapter instance + * @opcode: flag query to perform + * @idn: flag idn to access + * @index: flag index to access + * @flag_res: the flag value after the query request completes + * + * Returns 0 for success, non-zero in case of failure + */ +int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode, + enum flag_idn idn, u8 index, bool *flag_res) +{ + struct ufs_query_req *request = NULL; + struct ufs_query_res *response = NULL; + int err, selector = 0; + int timeout = QUERY_REQ_TIMEOUT; + + BUG_ON(!hba); + + ufshcd_hold(hba, false); + mutex_lock(&hba->dev_cmd.lock); + ufshcd_init_query(hba, &request, &response, opcode, idn, index, + selector); + + switch (opcode) { + case UPIU_QUERY_OPCODE_SET_FLAG: + case UPIU_QUERY_OPCODE_CLEAR_FLAG: + case UPIU_QUERY_OPCODE_TOGGLE_FLAG: + request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST; + break; + case UPIU_QUERY_OPCODE_READ_FLAG: + request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST; + if (!flag_res) { + /* No dummy reads */ + dev_err(hba->dev, "%s: Invalid argument for read request\n", + __func__); + err = -EINVAL; + goto out_unlock; + } + break; + default: + dev_err(hba->dev, + "%s: Expected query flag opcode but got = %d\n", + __func__, opcode); + err = -EINVAL; + goto out_unlock; + } + + err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, timeout); + + if (err) { + dev_err(hba->dev, + "%s: Sending flag query for idn %d failed, err = %d\n", + __func__, idn, err); + goto out_unlock; + } + + if (flag_res) + *flag_res = (be32_to_cpu(response->upiu_res.value) & + MASK_QUERY_UPIU_FLAG_LOC) & 0x1; + +out_unlock: + mutex_unlock(&hba->dev_cmd.lock); + ufshcd_release(hba); + return err; +} + +/** + * ufshcd_query_attr - API function for sending attribute requests + * @hba: per-adapter instance + * @opcode: attribute opcode + * @idn: attribute idn to access + * @index: index field + * @selector: selector field + * @attr_val: the attribute value after the query request completes + * + * Returns 0 for success, non-zero in case of failure +*/ +int ufshcd_query_attr(struct ufs_hba *hba, enum query_opcode opcode, + enum attr_idn idn, u8 index, u8 selector, u32 *attr_val) +{ + struct ufs_query_req *request = NULL; + struct ufs_query_res *response = NULL; + int err; + + BUG_ON(!hba); + + if (!attr_val) { + dev_err(hba->dev, "%s: attribute value required for opcode 0x%x\n", + __func__, opcode); + return -EINVAL; + } + + ufshcd_hold(hba, false); + + mutex_lock(&hba->dev_cmd.lock); + ufshcd_init_query(hba, &request, &response, opcode, idn, index, + selector); + + switch (opcode) { + case UPIU_QUERY_OPCODE_WRITE_ATTR: + request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST; + request->upiu_req.value = cpu_to_be32(*attr_val); + break; + case UPIU_QUERY_OPCODE_READ_ATTR: + request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST; + break; + default: + dev_err(hba->dev, "%s: Expected query attr opcode but got = 0x%.2x\n", + __func__, opcode); + err = -EINVAL; + goto out_unlock; + } + + err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, QUERY_REQ_TIMEOUT); + + if (err) { + dev_err(hba->dev, "%s: opcode 0x%.2x for idn %d failed, index %d, err = %d\n", + __func__, opcode, idn, index, err); + goto out_unlock; + } + + *attr_val = be32_to_cpu(response->upiu_res.value); + +out_unlock: + mutex_unlock(&hba->dev_cmd.lock); + ufshcd_release(hba); + return err; +} + +/** + * ufshcd_query_attr_retry() - API function for sending query + * attribute with retries + * @hba: per-adapter instance + * @opcode: attribute opcode + * @idn: attribute idn to access + * @index: index field + * @selector: selector field + * @attr_val: the attribute value after the query request + * completes + * + * Returns 0 for success, non-zero in case of failure +*/ +int ufshcd_query_attr_retry(struct ufs_hba *hba, + enum query_opcode opcode, enum attr_idn idn, u8 index, u8 selector, + u32 *attr_val) +{ + int ret = 0; + u32 retries; + + for (retries = QUERY_REQ_RETRIES; retries > 0; retries--) { + ret = ufshcd_query_attr(hba, opcode, idn, index, + selector, attr_val); + if (ret) + dev_dbg(hba->dev, "%s: failed with error %d, retries %d\n", + __func__, ret, retries); + else + break; + } + + if (ret) + dev_err(hba->dev, + "%s: query attribute, idn %d, failed with error %d after %d retries\n", + __func__, idn, ret, QUERY_REQ_RETRIES); + return ret; +} + +static int __ufshcd_query_descriptor(struct ufs_hba *hba, + enum query_opcode opcode, enum desc_idn idn, u8 index, + u8 selector, u8 *desc_buf, int *buf_len) +{ + struct ufs_query_req *request = NULL; + struct ufs_query_res *response = NULL; + int err; + + BUG_ON(!hba); + + if (!desc_buf) { + dev_err(hba->dev, "%s: descriptor buffer required for opcode 0x%x\n", + __func__, opcode); + return -EINVAL; + } + + if (*buf_len < QUERY_DESC_MIN_SIZE || *buf_len > QUERY_DESC_MAX_SIZE) { + dev_err(hba->dev, "%s: descriptor buffer size (%d) is out of range\n", + __func__, *buf_len); + return -EINVAL; + } + + ufshcd_hold(hba, false); + + mutex_lock(&hba->dev_cmd.lock); + ufshcd_init_query(hba, &request, &response, opcode, idn, index, + selector); + hba->dev_cmd.query.descriptor = desc_buf; + request->upiu_req.length = cpu_to_be16(*buf_len); + + switch (opcode) { + case UPIU_QUERY_OPCODE_WRITE_DESC: + request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST; + break; + case UPIU_QUERY_OPCODE_READ_DESC: + request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST; + break; + default: + dev_err(hba->dev, + "%s: Expected query descriptor opcode but got = 0x%.2x\n", + __func__, opcode); + err = -EINVAL; + goto out_unlock; + } + + err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, QUERY_REQ_TIMEOUT); + + if (err) { + dev_err(hba->dev, "%s: opcode 0x%.2x for idn %d failed, index %d, err = %d\n", + __func__, opcode, idn, index, err); + goto out_unlock; + } + + *buf_len = be16_to_cpu(response->upiu_res.length); + +out_unlock: + hba->dev_cmd.query.descriptor = NULL; + mutex_unlock(&hba->dev_cmd.lock); + ufshcd_release(hba); + return err; +} + +/** + * ufshcd_query_descriptor_retry - API function for sending descriptor requests + * @hba: per-adapter instance + * @opcode: attribute opcode + * @idn: attribute idn to access + * @index: index field + * @selector: selector field + * @desc_buf: the buffer that contains the descriptor + * @buf_len: length parameter passed to the device + * + * Returns 0 for success, non-zero in case of failure. + * The buf_len parameter will contain, on return, the length parameter + * received on the response. + */ +int ufshcd_query_descriptor_retry(struct ufs_hba *hba, + enum query_opcode opcode, + enum desc_idn idn, u8 index, + u8 selector, + u8 *desc_buf, int *buf_len) +{ + int err; + int retries; + + for (retries = QUERY_REQ_RETRIES; retries > 0; retries--) { + err = __ufshcd_query_descriptor(hba, opcode, idn, index, + selector, desc_buf, buf_len); + if (!err || err == -EINVAL) + break; + } + + return err; +} + +/** + * ufshcd_map_desc_id_to_length - map descriptor IDN to its length + * @hba: Pointer to adapter instance + * @desc_id: descriptor idn value + * @desc_len: mapped desc length (out) + */ +void ufshcd_map_desc_id_to_length(struct ufs_hba *hba, enum desc_idn desc_id, + int *desc_len) +{ + if (desc_id >= QUERY_DESC_IDN_MAX || desc_id == QUERY_DESC_IDN_RFU_0 || + desc_id == QUERY_DESC_IDN_RFU_1) + *desc_len = 0; + else + *desc_len = hba->desc_size[desc_id]; +} +EXPORT_SYMBOL(ufshcd_map_desc_id_to_length); + +static void ufshcd_update_desc_length(struct ufs_hba *hba, + enum desc_idn desc_id, int desc_index, + unsigned char desc_len) +{ + if (hba->desc_size[desc_id] == QUERY_DESC_MAX_SIZE && + desc_id != QUERY_DESC_IDN_STRING && desc_index != UFS_RPMB_UNIT) + /* For UFS 3.1, the normal unit descriptor is 10 bytes larger + * than the RPMB unit, however, both descriptors share the same + * desc_idn, to cover both unit descriptors with one length, we + * choose the normal unit descriptor length by desc_index. + */ + hba->desc_size[desc_id] = desc_len; +} + +/** + * ufshcd_read_desc_param - read the specified descriptor parameter + * @hba: Pointer to adapter instance + * @desc_id: descriptor idn value + * @desc_index: descriptor index + * @param_offset: offset of the parameter to read + * @param_read_buf: pointer to buffer where parameter would be read + * @param_size: sizeof(param_read_buf) + * + * Return 0 in case of success, non-zero otherwise + */ +int ufshcd_read_desc_param(struct ufs_hba *hba, + enum desc_idn desc_id, + int desc_index, + u8 param_offset, + u8 *param_read_buf, + u8 param_size) +{ + int ret; + u8 *desc_buf; + int buff_len; + bool is_kmalloc = true; + + /* Safety check */ + if (desc_id >= QUERY_DESC_IDN_MAX || !param_size) + return -EINVAL; + + /* Get the length of descriptor */ + ufshcd_map_desc_id_to_length(hba, desc_id, &buff_len); + if (!buff_len) { + dev_err(hba->dev, "%s: Failed to get desc length\n", __func__); + return -EINVAL; + } + + if (param_offset >= buff_len) { + dev_err(hba->dev, "%s: Invalid offset 0x%x in descriptor IDN 0x%x, length 0x%x\n", + __func__, param_offset, desc_id, buff_len); + return -EINVAL; + } + + /* Check whether we need temp memory */ + if (param_offset != 0 || param_size < buff_len) { + desc_buf = kzalloc(buff_len, GFP_KERNEL); + if (!desc_buf) + return -ENOMEM; + } else { + desc_buf = param_read_buf; + is_kmalloc = false; + } + + /* Request for full descriptor */ + ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_READ_DESC, + desc_id, desc_index, 0, + desc_buf, &buff_len); + + if (ret) { + dev_err(hba->dev, "%s: Failed reading descriptor. desc_id %d, desc_index %d, param_offset %d, ret %d\n", + __func__, desc_id, desc_index, param_offset, ret); + goto out; + } + + /* Sanity check */ + if (desc_buf[QUERY_DESC_DESC_TYPE_OFFSET] != desc_id) { + dev_err(hba->dev, "%s: invalid desc_id %d in descriptor header\n", + __func__, desc_buf[QUERY_DESC_DESC_TYPE_OFFSET]); + ret = -EINVAL; + goto out; + } + + /* Update descriptor length */ + buff_len = desc_buf[QUERY_DESC_LENGTH_OFFSET]; + ufshcd_update_desc_length(hba, desc_id, desc_index, buff_len); + + if (is_kmalloc) { + /* Make sure we don't copy more data than available */ + if (param_offset >= buff_len) + ret = -EINVAL; + else + memcpy(param_read_buf, &desc_buf[param_offset], + min_t(u32, param_size, buff_len - param_offset)); + } +out: + if (is_kmalloc) + kfree(desc_buf); + return ret; +} + +/** + * struct uc_string_id - unicode string + * + * @len: size of this descriptor inclusive + * @type: descriptor type + * @uc: unicode string character + */ +struct uc_string_id { + u8 len; + u8 type; + wchar_t uc[]; +} __packed; + +/* replace non-printable or non-ASCII characters with spaces */ +static inline char ufshcd_remove_non_printable(u8 ch) +{ + return (ch >= 0x20 && ch <= 0x7e) ? ch : ' '; +} + +/** + * ufshcd_read_string_desc - read string descriptor + * @hba: pointer to adapter instance + * @desc_index: descriptor index + * @buf: pointer to buffer where descriptor would be read, + * the caller should free the memory. + * @ascii: if true convert from unicode to ascii characters + * null terminated string. + * + * Return: + * * string size on success. + * * -ENOMEM: on allocation failure + * * -EINVAL: on a wrong parameter + */ +int ufshcd_read_string_desc(struct ufs_hba *hba, u8 desc_index, + u8 **buf, bool ascii) +{ + struct uc_string_id *uc_str; + u8 *str; + int ret; + + if (!buf) + return -EINVAL; + + uc_str = kzalloc(QUERY_DESC_MAX_SIZE, GFP_KERNEL); + if (!uc_str) + return -ENOMEM; + + ret = ufshcd_read_desc_param(hba, QUERY_DESC_IDN_STRING, desc_index, 0, + (u8 *)uc_str, QUERY_DESC_MAX_SIZE); + if (ret < 0) { + dev_err(hba->dev, "Reading String Desc failed after %d retries. err = %d\n", + QUERY_REQ_RETRIES, ret); + str = NULL; + goto out; + } + + if (uc_str->len <= QUERY_DESC_HDR_SIZE) { + dev_dbg(hba->dev, "String Desc is of zero length\n"); + str = NULL; + ret = 0; + goto out; + } + + if (ascii) { + ssize_t ascii_len; + int i; + /* remove header and divide by 2 to move from UTF16 to UTF8 */ + ascii_len = (uc_str->len - QUERY_DESC_HDR_SIZE) / 2 + 1; + str = kzalloc(ascii_len, GFP_KERNEL); + if (!str) { + ret = -ENOMEM; + goto out; + } + + /* + * the descriptor contains string in UTF16 format + * we need to convert to utf-8 so it can be displayed + */ + ret = utf16s_to_utf8s(uc_str->uc, + uc_str->len - QUERY_DESC_HDR_SIZE, + UTF16_BIG_ENDIAN, str, ascii_len - 1); + + /* replace non-printable or non-ASCII characters with spaces */ + for (i = 0; i < ret; i++) + str[i] = ufshcd_remove_non_printable(str[i]); + + str[ret++] = '\0'; + + } else { + str = kmemdup(uc_str, uc_str->len, GFP_KERNEL); + if (!str) { + ret = -ENOMEM; + goto out; + } + ret = uc_str->len; + } +out: + *buf = str; + kfree(uc_str); + return ret; +} + +/** + * ufshcd_read_unit_desc_param - read the specified unit descriptor parameter + * @hba: Pointer to adapter instance + * @lun: lun id + * @param_offset: offset of the parameter to read + * @param_read_buf: pointer to buffer where parameter would be read + * @param_size: sizeof(param_read_buf) + * + * Return 0 in case of success, non-zero otherwise + */ +static inline int ufshcd_read_unit_desc_param(struct ufs_hba *hba, + int lun, + enum unit_desc_param param_offset, + u8 *param_read_buf, + u32 param_size) +{ + /* + * Unit descriptors are only available for general purpose LUs (LUN id + * from 0 to 7) and RPMB Well known LU. + */ + if (!ufs_is_valid_unit_desc_lun(&hba->dev_info, lun, param_offset)) + return -EOPNOTSUPP; + + return ufshcd_read_desc_param(hba, QUERY_DESC_IDN_UNIT, lun, + param_offset, param_read_buf, param_size); +} + +static int ufshcd_get_ref_clk_gating_wait(struct ufs_hba *hba) +{ + int err = 0; + u32 gating_wait = UFSHCD_REF_CLK_GATING_WAIT_US; + + if (hba->dev_info.wspecversion >= 0x300) { + err = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR, + QUERY_ATTR_IDN_REF_CLK_GATING_WAIT_TIME, 0, 0, + &gating_wait); + if (err) + dev_err(hba->dev, "Failed reading bRefClkGatingWait. err = %d, use default %uus\n", + err, gating_wait); + + if (gating_wait == 0) { + gating_wait = UFSHCD_REF_CLK_GATING_WAIT_US; + dev_err(hba->dev, "Undefined ref clk gating wait time, use default %uus\n", + gating_wait); + } + + hba->dev_info.clk_gating_wait_us = gating_wait; + } + + return err; +} + +/** + * ufshcd_memory_alloc - allocate memory for host memory space data structures + * @hba: per adapter instance + * + * 1. Allocate DMA memory for Command Descriptor array + * Each command descriptor consist of Command UPIU, Response UPIU and PRDT + * 2. Allocate DMA memory for UTP Transfer Request Descriptor List (UTRDL). + * 3. Allocate DMA memory for UTP Task Management Request Descriptor List + * (UTMRDL) + * 4. Allocate memory for local reference block(lrb). + * + * Returns 0 for success, non-zero in case of failure + */ +static int ufshcd_memory_alloc(struct ufs_hba *hba) +{ + size_t utmrdl_size, utrdl_size, ucdl_size; + + /* Allocate memory for UTP command descriptors */ + ucdl_size = (sizeof(struct utp_transfer_cmd_desc) * hba->nutrs); + hba->ucdl_base_addr = dmam_alloc_coherent(hba->dev, + ucdl_size, + &hba->ucdl_dma_addr, + GFP_KERNEL); + + /* + * UFSHCI requires UTP command descriptor to be 128 byte aligned. + * make sure hba->ucdl_dma_addr is aligned to PAGE_SIZE + * if hba->ucdl_dma_addr is aligned to PAGE_SIZE, then it will + * be aligned to 128 bytes as well + */ + if (!hba->ucdl_base_addr || + WARN_ON(hba->ucdl_dma_addr & (PAGE_SIZE - 1))) { + dev_err(hba->dev, + "Command Descriptor Memory allocation failed\n"); + goto out; + } + + /* + * Allocate memory for UTP Transfer descriptors + * UFSHCI requires 1024 byte alignment of UTRD + */ + utrdl_size = (sizeof(struct utp_transfer_req_desc) * hba->nutrs); + hba->utrdl_base_addr = dmam_alloc_coherent(hba->dev, + utrdl_size, + &hba->utrdl_dma_addr, + GFP_KERNEL); + if (!hba->utrdl_base_addr || + WARN_ON(hba->utrdl_dma_addr & (PAGE_SIZE - 1))) { + dev_err(hba->dev, + "Transfer Descriptor Memory allocation failed\n"); + goto out; + } + + /* + * Allocate memory for UTP Task Management descriptors + * UFSHCI requires 1024 byte alignment of UTMRD + */ + utmrdl_size = sizeof(struct utp_task_req_desc) * hba->nutmrs; + hba->utmrdl_base_addr = dmam_alloc_coherent(hba->dev, + utmrdl_size, + &hba->utmrdl_dma_addr, + GFP_KERNEL); + if (!hba->utmrdl_base_addr || + WARN_ON(hba->utmrdl_dma_addr & (PAGE_SIZE - 1))) { + dev_err(hba->dev, + "Task Management Descriptor Memory allocation failed\n"); + goto out; + } + + /* Allocate memory for local reference block */ + hba->lrb = devm_kcalloc(hba->dev, + hba->nutrs, sizeof(struct ufshcd_lrb), + GFP_KERNEL); + if (!hba->lrb) { + dev_err(hba->dev, "LRB Memory allocation failed\n"); + goto out; + } + return 0; +out: + return -ENOMEM; +} + +/** + * ufshcd_host_memory_configure - configure local reference block with + * memory offsets + * @hba: per adapter instance + * + * Configure Host memory space + * 1. Update Corresponding UTRD.UCDBA and UTRD.UCDBAU with UCD DMA + * address. + * 2. Update each UTRD with Response UPIU offset, Response UPIU length + * and PRDT offset. + * 3. Save the corresponding addresses of UTRD, UCD.CMD, UCD.RSP and UCD.PRDT + * into local reference block. + */ +static void ufshcd_host_memory_configure(struct ufs_hba *hba) +{ + struct utp_transfer_req_desc *utrdlp; + dma_addr_t cmd_desc_dma_addr; + dma_addr_t cmd_desc_element_addr; + u16 response_offset; + u16 prdt_offset; + int cmd_desc_size; + int i; + + utrdlp = hba->utrdl_base_addr; + + response_offset = + offsetof(struct utp_transfer_cmd_desc, response_upiu); + prdt_offset = + offsetof(struct utp_transfer_cmd_desc, prd_table); + + cmd_desc_size = sizeof(struct utp_transfer_cmd_desc); + cmd_desc_dma_addr = hba->ucdl_dma_addr; + + for (i = 0; i < hba->nutrs; i++) { + /* Configure UTRD with command descriptor base address */ + cmd_desc_element_addr = + (cmd_desc_dma_addr + (cmd_desc_size * i)); + utrdlp[i].command_desc_base_addr_lo = + cpu_to_le32(lower_32_bits(cmd_desc_element_addr)); + utrdlp[i].command_desc_base_addr_hi = + cpu_to_le32(upper_32_bits(cmd_desc_element_addr)); + + /* Response upiu and prdt offset should be in double words */ + if (hba->quirks & UFSHCD_QUIRK_PRDT_BYTE_GRAN) { + utrdlp[i].response_upiu_offset = + cpu_to_le16(response_offset); + utrdlp[i].prd_table_offset = + cpu_to_le16(prdt_offset); + utrdlp[i].response_upiu_length = + cpu_to_le16(ALIGNED_UPIU_SIZE); + } else { + utrdlp[i].response_upiu_offset = + cpu_to_le16(response_offset >> 2); + utrdlp[i].prd_table_offset = + cpu_to_le16(prdt_offset >> 2); + utrdlp[i].response_upiu_length = + cpu_to_le16(ALIGNED_UPIU_SIZE >> 2); + } + + ufshcd_init_lrb(hba, &hba->lrb[i], i); + } +} + +/** + * ufshcd_dme_link_startup - Notify Unipro to perform link startup + * @hba: per adapter instance + * + * UIC_CMD_DME_LINK_STARTUP command must be issued to Unipro layer, + * in order to initialize the Unipro link startup procedure. + * Once the Unipro links are up, the device connected to the controller + * is detected. + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_dme_link_startup(struct ufs_hba *hba) +{ + struct uic_command uic_cmd = {0}; + int ret; + + uic_cmd.command = UIC_CMD_DME_LINK_STARTUP; + + ret = ufshcd_send_uic_cmd(hba, &uic_cmd); + if (ret) + dev_dbg(hba->dev, + "dme-link-startup: error code %d\n", ret); + return ret; +} +/** + * ufshcd_dme_reset - UIC command for DME_RESET + * @hba: per adapter instance + * + * DME_RESET command is issued in order to reset UniPro stack. + * This function now deals with cold reset. + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_dme_reset(struct ufs_hba *hba) +{ + struct uic_command uic_cmd = {0}; + int ret; + + uic_cmd.command = UIC_CMD_DME_RESET; + + ret = ufshcd_send_uic_cmd(hba, &uic_cmd); + if (ret) + dev_err(hba->dev, + "dme-reset: error code %d\n", ret); + + return ret; +} + +int ufshcd_dme_configure_adapt(struct ufs_hba *hba, + int agreed_gear, + int adapt_val) +{ + int ret; + + if (agreed_gear < UFS_HS_G4) + adapt_val = PA_NO_ADAPT; + + ret = ufshcd_dme_set(hba, + UIC_ARG_MIB(PA_TXHSADAPTTYPE), + adapt_val); + return ret; +} +EXPORT_SYMBOL_GPL(ufshcd_dme_configure_adapt); + +/** + * ufshcd_dme_enable - UIC command for DME_ENABLE + * @hba: per adapter instance + * + * DME_ENABLE command is issued in order to enable UniPro stack. + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_dme_enable(struct ufs_hba *hba) +{ + struct uic_command uic_cmd = {0}; + int ret; + + uic_cmd.command = UIC_CMD_DME_ENABLE; + + ret = ufshcd_send_uic_cmd(hba, &uic_cmd); + if (ret) + dev_err(hba->dev, + "dme-enable: error code %d\n", ret); + + return ret; +} + +static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba) +{ + #define MIN_DELAY_BEFORE_DME_CMDS_US 1000 + unsigned long min_sleep_time_us; + + if (!(hba->quirks & UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS)) + return; + + /* + * last_dme_cmd_tstamp will be 0 only for 1st call to + * this function + */ + if (unlikely(!ktime_to_us(hba->last_dme_cmd_tstamp))) { + min_sleep_time_us = MIN_DELAY_BEFORE_DME_CMDS_US; + } else { + unsigned long delta = + (unsigned long) ktime_to_us( + ktime_sub(ktime_get(), + hba->last_dme_cmd_tstamp)); + + if (delta < MIN_DELAY_BEFORE_DME_CMDS_US) + min_sleep_time_us = + MIN_DELAY_BEFORE_DME_CMDS_US - delta; + else + return; /* no more delay required */ + } + + /* allow sleep for extra 50us if needed */ + usleep_range(min_sleep_time_us, min_sleep_time_us + 50); +} + +/** + * ufshcd_dme_set_attr - UIC command for DME_SET, DME_PEER_SET + * @hba: per adapter instance + * @attr_sel: uic command argument1 + * @attr_set: attribute set type as uic command argument2 + * @mib_val: setting value as uic command argument3 + * @peer: indicate whether peer or local + * + * Returns 0 on success, non-zero value on failure + */ +int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel, + u8 attr_set, u32 mib_val, u8 peer) +{ + struct uic_command uic_cmd = {0}; + static const char *const action[] = { + "dme-set", + "dme-peer-set" + }; + const char *set = action[!!peer]; + int ret; + int retries = UFS_UIC_COMMAND_RETRIES; + + uic_cmd.command = peer ? + UIC_CMD_DME_PEER_SET : UIC_CMD_DME_SET; + uic_cmd.argument1 = attr_sel; + uic_cmd.argument2 = UIC_ARG_ATTR_TYPE(attr_set); + uic_cmd.argument3 = mib_val; + + do { + /* for peer attributes we retry upon failure */ + ret = ufshcd_send_uic_cmd(hba, &uic_cmd); + if (ret) + dev_dbg(hba->dev, "%s: attr-id 0x%x val 0x%x error code %d\n", + set, UIC_GET_ATTR_ID(attr_sel), mib_val, ret); + } while (ret && peer && --retries); + + if (ret) + dev_err(hba->dev, "%s: attr-id 0x%x val 0x%x failed %d retries\n", + set, UIC_GET_ATTR_ID(attr_sel), mib_val, + UFS_UIC_COMMAND_RETRIES - retries); + + return ret; +} +EXPORT_SYMBOL_GPL(ufshcd_dme_set_attr); + +/** + * ufshcd_dme_get_attr - UIC command for DME_GET, DME_PEER_GET + * @hba: per adapter instance + * @attr_sel: uic command argument1 + * @mib_val: the value of the attribute as returned by the UIC command + * @peer: indicate whether peer or local + * + * Returns 0 on success, non-zero value on failure + */ +int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, + u32 *mib_val, u8 peer) +{ + struct uic_command uic_cmd = {0}; + static const char *const action[] = { + "dme-get", + "dme-peer-get" + }; + const char *get = action[!!peer]; + int ret; + int retries = UFS_UIC_COMMAND_RETRIES; + struct ufs_pa_layer_attr orig_pwr_info; + struct ufs_pa_layer_attr temp_pwr_info; + bool pwr_mode_change = false; + + if (peer && (hba->quirks & UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE)) { + orig_pwr_info = hba->pwr_info; + temp_pwr_info = orig_pwr_info; + + if (orig_pwr_info.pwr_tx == FAST_MODE || + orig_pwr_info.pwr_rx == FAST_MODE) { + temp_pwr_info.pwr_tx = FASTAUTO_MODE; + temp_pwr_info.pwr_rx = FASTAUTO_MODE; + pwr_mode_change = true; + } else if (orig_pwr_info.pwr_tx == SLOW_MODE || + orig_pwr_info.pwr_rx == SLOW_MODE) { + temp_pwr_info.pwr_tx = SLOWAUTO_MODE; + temp_pwr_info.pwr_rx = SLOWAUTO_MODE; + pwr_mode_change = true; + } + if (pwr_mode_change) { + ret = ufshcd_change_power_mode(hba, &temp_pwr_info); + if (ret) + goto out; + } + } + + uic_cmd.command = peer ? + UIC_CMD_DME_PEER_GET : UIC_CMD_DME_GET; + uic_cmd.argument1 = attr_sel; + + do { + /* for peer attributes we retry upon failure */ + ret = ufshcd_send_uic_cmd(hba, &uic_cmd); + if (ret) + dev_dbg(hba->dev, "%s: attr-id 0x%x error code %d\n", + get, UIC_GET_ATTR_ID(attr_sel), ret); + } while (ret && peer && --retries); + + if (ret) + dev_err(hba->dev, "%s: attr-id 0x%x failed %d retries\n", + get, UIC_GET_ATTR_ID(attr_sel), + UFS_UIC_COMMAND_RETRIES - retries); + + if (mib_val && !ret) + *mib_val = uic_cmd.argument3; + + if (peer && (hba->quirks & UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE) + && pwr_mode_change) + ufshcd_change_power_mode(hba, &orig_pwr_info); +out: + return ret; +} +EXPORT_SYMBOL_GPL(ufshcd_dme_get_attr); + +/** + * ufshcd_uic_pwr_ctrl - executes UIC commands (which affects the link power + * state) and waits for it to take effect. + * + * @hba: per adapter instance + * @cmd: UIC command to execute + * + * DME operations like DME_SET(PA_PWRMODE), DME_HIBERNATE_ENTER & + * DME_HIBERNATE_EXIT commands take some time to take its effect on both host + * and device UniPro link and hence it's final completion would be indicated by + * dedicated status bits in Interrupt Status register (UPMS, UHES, UHXS) in + * addition to normal UIC command completion Status (UCCS). This function only + * returns after the relevant status bits indicate the completion. + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba, struct uic_command *cmd) +{ + DECLARE_COMPLETION_ONSTACK(uic_async_done); + unsigned long flags; + u8 status; + int ret; + bool reenable_intr = false; + + mutex_lock(&hba->uic_cmd_mutex); + ufshcd_add_delay_before_dme_cmd(hba); + + spin_lock_irqsave(hba->host->host_lock, flags); + if (ufshcd_is_link_broken(hba)) { + ret = -ENOLINK; + goto out_unlock; + } + hba->uic_async_done = &uic_async_done; + if (ufshcd_readl(hba, REG_INTERRUPT_ENABLE) & UIC_COMMAND_COMPL) { + ufshcd_disable_intr(hba, UIC_COMMAND_COMPL); + /* + * Make sure UIC command completion interrupt is disabled before + * issuing UIC command. + */ + wmb(); + reenable_intr = true; + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + ret = __ufshcd_send_uic_cmd(hba, cmd, false); + if (ret) { + dev_err(hba->dev, + "pwr ctrl cmd 0x%x with mode 0x%x uic error %d\n", + cmd->command, cmd->argument3, ret); + goto out; + } + + if (!wait_for_completion_timeout(hba->uic_async_done, + msecs_to_jiffies(UIC_CMD_TIMEOUT))) { + dev_err(hba->dev, + "pwr ctrl cmd 0x%x with mode 0x%x completion timeout\n", + cmd->command, cmd->argument3); + + if (!cmd->cmd_active) { + dev_err(hba->dev, "%s: Power Mode Change operation has been completed, go check UPMCRS\n", + __func__); + goto check_upmcrs; + } + + ret = -ETIMEDOUT; + goto out; + } + +check_upmcrs: + status = ufshcd_get_upmcrs(hba); + if (status != PWR_LOCAL) { + dev_err(hba->dev, + "pwr ctrl cmd 0x%x failed, host upmcrs:0x%x\n", + cmd->command, status); + ret = (status != PWR_OK) ? status : -1; + } +out: + if (ret) { + ufshcd_print_host_state(hba); + ufshcd_print_pwr_info(hba); + ufshcd_print_evt_hist(hba); + } + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->active_uic_cmd = NULL; + hba->uic_async_done = NULL; + if (reenable_intr) + ufshcd_enable_intr(hba, UIC_COMMAND_COMPL); + if (ret) { + ufshcd_set_link_broken(hba); + ufshcd_schedule_eh_work(hba); + } +out_unlock: + spin_unlock_irqrestore(hba->host->host_lock, flags); + mutex_unlock(&hba->uic_cmd_mutex); + + return ret; +} + +/** + * ufshcd_uic_change_pwr_mode - Perform the UIC power mode chage + * using DME_SET primitives. + * @hba: per adapter instance + * @mode: powr mode value + * + * Returns 0 on success, non-zero value on failure + */ +int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode) +{ + struct uic_command uic_cmd = {0}; + int ret; + + if (hba->quirks & UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP) { + ret = ufshcd_dme_set(hba, + UIC_ARG_MIB_SEL(PA_RXHSUNTERMCAP, 0), 1); + if (ret) { + dev_err(hba->dev, "%s: failed to enable PA_RXHSUNTERMCAP ret %d\n", + __func__, ret); + goto out; + } + } + + uic_cmd.command = UIC_CMD_DME_SET; + uic_cmd.argument1 = UIC_ARG_MIB(PA_PWRMODE); + uic_cmd.argument3 = mode; + ufshcd_hold(hba, false); + ret = ufshcd_uic_pwr_ctrl(hba, &uic_cmd); + ufshcd_release(hba); + +out: + return ret; +} +EXPORT_SYMBOL_GPL(ufshcd_uic_change_pwr_mode); + +int ufshcd_link_recovery(struct ufs_hba *hba) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->ufshcd_state = UFSHCD_STATE_RESET; + ufshcd_set_eh_in_progress(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + /* Reset the attached device */ + ufshcd_device_reset(hba); + + ret = ufshcd_host_reset_and_restore(hba); + + spin_lock_irqsave(hba->host->host_lock, flags); + if (ret) + hba->ufshcd_state = UFSHCD_STATE_ERROR; + ufshcd_clear_eh_in_progress(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + if (ret) + dev_err(hba->dev, "%s: link recovery failed, err %d", + __func__, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(ufshcd_link_recovery); + +int ufshcd_uic_hibern8_enter(struct ufs_hba *hba) +{ + int ret; + struct uic_command uic_cmd = {0}; + ktime_t start = ktime_get(); + + ufshcd_vops_hibern8_notify(hba, UIC_CMD_DME_HIBER_ENTER, PRE_CHANGE); + + uic_cmd.command = UIC_CMD_DME_HIBER_ENTER; + ret = ufshcd_uic_pwr_ctrl(hba, &uic_cmd); + trace_ufshcd_profile_hibern8(dev_name(hba->dev), "enter", + ktime_to_us(ktime_sub(ktime_get(), start)), ret); + + if (ret) + dev_err(hba->dev, "%s: hibern8 enter failed. ret = %d\n", + __func__, ret); + else + ufshcd_vops_hibern8_notify(hba, UIC_CMD_DME_HIBER_ENTER, + POST_CHANGE); + + return ret; +} +EXPORT_SYMBOL_GPL(ufshcd_uic_hibern8_enter); + +int ufshcd_uic_hibern8_exit(struct ufs_hba *hba) +{ + struct uic_command uic_cmd = {0}; + int ret; + ktime_t start = ktime_get(); + + ufshcd_vops_hibern8_notify(hba, UIC_CMD_DME_HIBER_EXIT, PRE_CHANGE); + + uic_cmd.command = UIC_CMD_DME_HIBER_EXIT; + ret = ufshcd_uic_pwr_ctrl(hba, &uic_cmd); + trace_ufshcd_profile_hibern8(dev_name(hba->dev), "exit", + ktime_to_us(ktime_sub(ktime_get(), start)), ret); + + if (ret) { + dev_err(hba->dev, "%s: hibern8 exit failed. ret = %d\n", + __func__, ret); + } else { + ufshcd_vops_hibern8_notify(hba, UIC_CMD_DME_HIBER_EXIT, + POST_CHANGE); + hba->ufs_stats.last_hibern8_exit_tstamp = local_clock(); + hba->ufs_stats.hibern8_exit_cnt++; + } + + return ret; +} +EXPORT_SYMBOL_GPL(ufshcd_uic_hibern8_exit); + +void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit) +{ + unsigned long flags; + bool update = false; + + if (!ufshcd_is_auto_hibern8_supported(hba)) + return; + + spin_lock_irqsave(hba->host->host_lock, flags); + if (hba->ahit != ahit) { + hba->ahit = ahit; + update = true; + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + + if (update && + !pm_runtime_suspended(&hba->ufs_device_wlun->sdev_gendev)) { + ufshcd_rpm_get_sync(hba); + ufshcd_hold(hba, false); + ufshcd_auto_hibern8_enable(hba); + ufshcd_release(hba); + ufshcd_rpm_put_sync(hba); + } +} +EXPORT_SYMBOL_GPL(ufshcd_auto_hibern8_update); + +void ufshcd_auto_hibern8_enable(struct ufs_hba *hba) +{ + if (!ufshcd_is_auto_hibern8_supported(hba)) + return; + + ufshcd_writel(hba, hba->ahit, REG_AUTO_HIBERNATE_IDLE_TIMER); +} + + /** + * ufshcd_init_pwr_info - setting the POR (power on reset) + * values in hba power info + * @hba: per-adapter instance + */ +static void ufshcd_init_pwr_info(struct ufs_hba *hba) +{ + hba->pwr_info.gear_rx = UFS_PWM_G1; + hba->pwr_info.gear_tx = UFS_PWM_G1; + hba->pwr_info.lane_rx = 1; + hba->pwr_info.lane_tx = 1; + hba->pwr_info.pwr_rx = SLOWAUTO_MODE; + hba->pwr_info.pwr_tx = SLOWAUTO_MODE; + hba->pwr_info.hs_rate = 0; +} + +/** + * ufshcd_get_max_pwr_mode - reads the max power mode negotiated with device + * @hba: per-adapter instance + */ +static int ufshcd_get_max_pwr_mode(struct ufs_hba *hba) +{ + struct ufs_pa_layer_attr *pwr_info = &hba->max_pwr_info.info; + + if (hba->max_pwr_info.is_valid) + return 0; + + if (hba->quirks & UFSHCD_QUIRK_HIBERN_FASTAUTO) { + pwr_info->pwr_tx = FASTAUTO_MODE; + pwr_info->pwr_rx = FASTAUTO_MODE; + } else { + pwr_info->pwr_tx = FAST_MODE; + pwr_info->pwr_rx = FAST_MODE; + } + pwr_info->hs_rate = PA_HS_MODE_B; + + /* Get the connected lane count */ + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES), + &pwr_info->lane_rx); + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), + &pwr_info->lane_tx); + + if (!pwr_info->lane_rx || !pwr_info->lane_tx) { + dev_err(hba->dev, "%s: invalid connected lanes value. rx=%d, tx=%d\n", + __func__, + pwr_info->lane_rx, + pwr_info->lane_tx); + return -EINVAL; + } + + /* + * First, get the maximum gears of HS speed. + * If a zero value, it means there is no HSGEAR capability. + * Then, get the maximum gears of PWM speed. + */ + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), &pwr_info->gear_rx); + if (!pwr_info->gear_rx) { + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR), + &pwr_info->gear_rx); + if (!pwr_info->gear_rx) { + dev_err(hba->dev, "%s: invalid max pwm rx gear read = %d\n", + __func__, pwr_info->gear_rx); + return -EINVAL; + } + pwr_info->pwr_rx = SLOW_MODE; + } + + ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), + &pwr_info->gear_tx); + if (!pwr_info->gear_tx) { + ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR), + &pwr_info->gear_tx); + if (!pwr_info->gear_tx) { + dev_err(hba->dev, "%s: invalid max pwm tx gear read = %d\n", + __func__, pwr_info->gear_tx); + return -EINVAL; + } + pwr_info->pwr_tx = SLOW_MODE; + } + + hba->max_pwr_info.is_valid = true; + return 0; +} + +static int ufshcd_change_power_mode(struct ufs_hba *hba, + struct ufs_pa_layer_attr *pwr_mode) +{ + int ret; + + /* if already configured to the requested pwr_mode */ + if (!hba->force_pmc && + pwr_mode->gear_rx == hba->pwr_info.gear_rx && + pwr_mode->gear_tx == hba->pwr_info.gear_tx && + pwr_mode->lane_rx == hba->pwr_info.lane_rx && + pwr_mode->lane_tx == hba->pwr_info.lane_tx && + pwr_mode->pwr_rx == hba->pwr_info.pwr_rx && + pwr_mode->pwr_tx == hba->pwr_info.pwr_tx && + pwr_mode->hs_rate == hba->pwr_info.hs_rate) { + dev_dbg(hba->dev, "%s: power already configured\n", __func__); + return 0; + } + + /* + * Configure attributes for power mode change with below. + * - PA_RXGEAR, PA_ACTIVERXDATALANES, PA_RXTERMINATION, + * - PA_TXGEAR, PA_ACTIVETXDATALANES, PA_TXTERMINATION, + * - PA_HSSERIES + */ + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXGEAR), pwr_mode->gear_rx); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVERXDATALANES), + pwr_mode->lane_rx); + if (pwr_mode->pwr_rx == FASTAUTO_MODE || + pwr_mode->pwr_rx == FAST_MODE) + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), true); + else + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), false); + + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXGEAR), pwr_mode->gear_tx); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVETXDATALANES), + pwr_mode->lane_tx); + if (pwr_mode->pwr_tx == FASTAUTO_MODE || + pwr_mode->pwr_tx == FAST_MODE) + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), true); + else + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), false); + + if (pwr_mode->pwr_rx == FASTAUTO_MODE || + pwr_mode->pwr_tx == FASTAUTO_MODE || + pwr_mode->pwr_rx == FAST_MODE || + pwr_mode->pwr_tx == FAST_MODE) + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HSSERIES), + pwr_mode->hs_rate); + + if (!(hba->quirks & UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING)) { + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA0), + DL_FC0ProtectionTimeOutVal_Default); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA1), + DL_TC0ReplayTimeOutVal_Default); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA2), + DL_AFC0ReqTimeOutVal_Default); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA3), + DL_FC1ProtectionTimeOutVal_Default); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA4), + DL_TC1ReplayTimeOutVal_Default); + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA5), + DL_AFC1ReqTimeOutVal_Default); + + ufshcd_dme_set(hba, UIC_ARG_MIB(DME_LocalFC0ProtectionTimeOutVal), + DL_FC0ProtectionTimeOutVal_Default); + ufshcd_dme_set(hba, UIC_ARG_MIB(DME_LocalTC0ReplayTimeOutVal), + DL_TC0ReplayTimeOutVal_Default); + ufshcd_dme_set(hba, UIC_ARG_MIB(DME_LocalAFC0ReqTimeOutVal), + DL_AFC0ReqTimeOutVal_Default); + } + + ret = ufshcd_uic_change_pwr_mode(hba, pwr_mode->pwr_rx << 4 + | pwr_mode->pwr_tx); + + if (ret) { + dev_err(hba->dev, + "%s: power mode change failed %d\n", __func__, ret); + } else { + ufshcd_vops_pwr_change_notify(hba, POST_CHANGE, NULL, + pwr_mode); + + memcpy(&hba->pwr_info, pwr_mode, + sizeof(struct ufs_pa_layer_attr)); + } + + return ret; +} + +/** + * ufshcd_config_pwr_mode - configure a new power mode + * @hba: per-adapter instance + * @desired_pwr_mode: desired power configuration + */ +int ufshcd_config_pwr_mode(struct ufs_hba *hba, + struct ufs_pa_layer_attr *desired_pwr_mode) +{ + struct ufs_pa_layer_attr final_params = { 0 }; + int ret; + + ret = ufshcd_vops_pwr_change_notify(hba, PRE_CHANGE, + desired_pwr_mode, &final_params); + + if (ret) + memcpy(&final_params, desired_pwr_mode, sizeof(final_params)); + + ret = ufshcd_change_power_mode(hba, &final_params); + + return ret; +} +EXPORT_SYMBOL_GPL(ufshcd_config_pwr_mode); + +/** + * ufshcd_complete_dev_init() - checks device readiness + * @hba: per-adapter instance + * + * Set fDeviceInit flag and poll until device toggles it. + */ +static int ufshcd_complete_dev_init(struct ufs_hba *hba) +{ + int err; + bool flag_res = true; + ktime_t timeout; + + err = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_SET_FLAG, + QUERY_FLAG_IDN_FDEVICEINIT, 0, NULL); + if (err) { + dev_err(hba->dev, + "%s setting fDeviceInit flag failed with error %d\n", + __func__, err); + goto out; + } + + /* Poll fDeviceInit flag to be cleared */ + timeout = ktime_add_ms(ktime_get(), FDEVICEINIT_COMPL_TIMEOUT); + do { + err = ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_READ_FLAG, + QUERY_FLAG_IDN_FDEVICEINIT, 0, &flag_res); + if (!flag_res) + break; + usleep_range(500, 1000); + } while (ktime_before(ktime_get(), timeout)); + + if (err) { + dev_err(hba->dev, + "%s reading fDeviceInit flag failed with error %d\n", + __func__, err); + } else if (flag_res) { + dev_err(hba->dev, + "%s fDeviceInit was not cleared by the device\n", + __func__); + err = -EBUSY; + } +out: + return err; +} + +/** + * ufshcd_make_hba_operational - Make UFS controller operational + * @hba: per adapter instance + * + * To bring UFS host controller to operational state, + * 1. Enable required interrupts + * 2. Configure interrupt aggregation + * 3. Program UTRL and UTMRL base address + * 4. Configure run-stop-registers + * + * Returns 0 on success, non-zero value on failure + */ +int ufshcd_make_hba_operational(struct ufs_hba *hba) +{ + int err = 0; + u32 reg; + + /* Enable required interrupts */ + ufshcd_enable_intr(hba, UFSHCD_ENABLE_INTRS); + + /* Configure interrupt aggregation */ + if (ufshcd_is_intr_aggr_allowed(hba)) + ufshcd_config_intr_aggr(hba, hba->nutrs - 1, INT_AGGR_DEF_TO); + else + ufshcd_disable_intr_aggr(hba); + + /* Configure UTRL and UTMRL base address registers */ + ufshcd_writel(hba, lower_32_bits(hba->utrdl_dma_addr), + REG_UTP_TRANSFER_REQ_LIST_BASE_L); + ufshcd_writel(hba, upper_32_bits(hba->utrdl_dma_addr), + REG_UTP_TRANSFER_REQ_LIST_BASE_H); + ufshcd_writel(hba, lower_32_bits(hba->utmrdl_dma_addr), + REG_UTP_TASK_REQ_LIST_BASE_L); + ufshcd_writel(hba, upper_32_bits(hba->utmrdl_dma_addr), + REG_UTP_TASK_REQ_LIST_BASE_H); + + /* + * Make sure base address and interrupt setup are updated before + * enabling the run/stop registers below. + */ + wmb(); + + /* + * UCRDY, UTMRLDY and UTRLRDY bits must be 1 + */ + reg = ufshcd_readl(hba, REG_CONTROLLER_STATUS); + if (!(ufshcd_get_lists_status(reg))) { + ufshcd_enable_run_stop_reg(hba); + } else { + dev_err(hba->dev, + "Host controller not ready to process requests"); + err = -EIO; + } + + return err; +} +EXPORT_SYMBOL_GPL(ufshcd_make_hba_operational); + +/** + * ufshcd_hba_stop - Send controller to reset state + * @hba: per adapter instance + */ +void ufshcd_hba_stop(struct ufs_hba *hba) +{ + unsigned long flags; + int err; + + /* + * Obtain the host lock to prevent that the controller is disabled + * while the UFS interrupt handler is active on another CPU. + */ + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_writel(hba, CONTROLLER_DISABLE, REG_CONTROLLER_ENABLE); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + err = ufshcd_wait_for_register(hba, REG_CONTROLLER_ENABLE, + CONTROLLER_ENABLE, CONTROLLER_DISABLE, + 10, 1); + if (err) + dev_err(hba->dev, "%s: Controller disable failed\n", __func__); +} +EXPORT_SYMBOL_GPL(ufshcd_hba_stop); + +/** + * ufshcd_hba_execute_hce - initialize the controller + * @hba: per adapter instance + * + * The controller resets itself and controller firmware initialization + * sequence kicks off. When controller is ready it will set + * the Host Controller Enable bit to 1. + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_hba_execute_hce(struct ufs_hba *hba) +{ + int retry_outer = 3; + int retry_inner; + +start: + if (ufshcd_is_hba_active(hba)) + /* change controller state to "reset state" */ + ufshcd_hba_stop(hba); + + /* UniPro link is disabled at this point */ + ufshcd_set_link_off(hba); + + ufshcd_vops_hce_enable_notify(hba, PRE_CHANGE); + + /* start controller initialization sequence */ + ufshcd_hba_start(hba); + + /* + * To initialize a UFS host controller HCE bit must be set to 1. + * During initialization the HCE bit value changes from 1->0->1. + * When the host controller completes initialization sequence + * it sets the value of HCE bit to 1. The same HCE bit is read back + * to check if the controller has completed initialization sequence. + * So without this delay the value HCE = 1, set in the previous + * instruction might be read back. + * This delay can be changed based on the controller. + */ + ufshcd_delay_us(hba->vps->hba_enable_delay_us, 100); + + /* wait for the host controller to complete initialization */ + retry_inner = 50; + while (!ufshcd_is_hba_active(hba)) { + if (retry_inner) { + retry_inner--; + } else { + dev_err(hba->dev, + "Controller enable failed\n"); + if (retry_outer) { + retry_outer--; + goto start; + } + return -EIO; + } + usleep_range(1000, 1100); + } + + /* enable UIC related interrupts */ + ufshcd_enable_intr(hba, UFSHCD_UIC_MASK); + + ufshcd_vops_hce_enable_notify(hba, POST_CHANGE); + + return 0; +} + +int ufshcd_hba_enable(struct ufs_hba *hba) +{ + int ret; + + if (hba->quirks & UFSHCI_QUIRK_BROKEN_HCE) { + ufshcd_set_link_off(hba); + ufshcd_vops_hce_enable_notify(hba, PRE_CHANGE); + + /* enable UIC related interrupts */ + ufshcd_enable_intr(hba, UFSHCD_UIC_MASK); + ret = ufshcd_dme_reset(hba); + if (!ret) { + ret = ufshcd_dme_enable(hba); + if (!ret) + ufshcd_vops_hce_enable_notify(hba, POST_CHANGE); + if (ret) + dev_err(hba->dev, + "Host controller enable failed with non-hce\n"); + } + } else { + ret = ufshcd_hba_execute_hce(hba); + } + + return ret; +} +EXPORT_SYMBOL_GPL(ufshcd_hba_enable); + +static int ufshcd_disable_tx_lcc(struct ufs_hba *hba, bool peer) +{ + int tx_lanes = 0, i, err = 0; + + if (!peer) + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), + &tx_lanes); + else + ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), + &tx_lanes); + for (i = 0; i < tx_lanes; i++) { + if (!peer) + err = ufshcd_dme_set(hba, + UIC_ARG_MIB_SEL(TX_LCC_ENABLE, + UIC_ARG_MPHY_TX_GEN_SEL_INDEX(i)), + 0); + else + err = ufshcd_dme_peer_set(hba, + UIC_ARG_MIB_SEL(TX_LCC_ENABLE, + UIC_ARG_MPHY_TX_GEN_SEL_INDEX(i)), + 0); + if (err) { + dev_err(hba->dev, "%s: TX LCC Disable failed, peer = %d, lane = %d, err = %d", + __func__, peer, i, err); + break; + } + } + + return err; +} + +static inline int ufshcd_disable_device_tx_lcc(struct ufs_hba *hba) +{ + return ufshcd_disable_tx_lcc(hba, true); +} + +void ufshcd_update_evt_hist(struct ufs_hba *hba, u32 id, u32 val) +{ + struct ufs_event_hist *e; + + if (id >= UFS_EVT_CNT) + return; + + e = &hba->ufs_stats.event[id]; + e->val[e->pos] = val; + e->tstamp[e->pos] = local_clock(); + e->cnt += 1; + e->pos = (e->pos + 1) % UFS_EVENT_HIST_LENGTH; + + ufshcd_vops_event_notify(hba, id, &val); +} +EXPORT_SYMBOL_GPL(ufshcd_update_evt_hist); + +/** + * ufshcd_link_startup - Initialize unipro link startup + * @hba: per adapter instance + * + * Returns 0 for success, non-zero in case of failure + */ +static int ufshcd_link_startup(struct ufs_hba *hba) +{ + int ret; + int retries = DME_LINKSTARTUP_RETRIES; + bool link_startup_again = false; + + /* + * If UFS device isn't active then we will have to issue link startup + * 2 times to make sure the device state move to active. + */ + if (!ufshcd_is_ufs_dev_active(hba)) + link_startup_again = true; + +link_startup: + do { + ufshcd_vops_link_startup_notify(hba, PRE_CHANGE); + + ret = ufshcd_dme_link_startup(hba); + + /* check if device is detected by inter-connect layer */ + if (!ret && !ufshcd_is_device_present(hba)) { + ufshcd_update_evt_hist(hba, + UFS_EVT_LINK_STARTUP_FAIL, + 0); + dev_err(hba->dev, "%s: Device not present\n", __func__); + ret = -ENXIO; + goto out; + } + + /* + * DME link lost indication is only received when link is up, + * but we can't be sure if the link is up until link startup + * succeeds. So reset the local Uni-Pro and try again. + */ + if (ret && retries && ufshcd_hba_enable(hba)) { + ufshcd_update_evt_hist(hba, + UFS_EVT_LINK_STARTUP_FAIL, + (u32)ret); + goto out; + } + } while (ret && retries--); + + if (ret) { + /* failed to get the link up... retire */ + ufshcd_update_evt_hist(hba, + UFS_EVT_LINK_STARTUP_FAIL, + (u32)ret); + goto out; + } + + if (link_startup_again) { + link_startup_again = false; + retries = DME_LINKSTARTUP_RETRIES; + goto link_startup; + } + + /* Mark that link is up in PWM-G1, 1-lane, SLOW-AUTO mode */ + ufshcd_init_pwr_info(hba); + ufshcd_print_pwr_info(hba); + + if (hba->quirks & UFSHCD_QUIRK_BROKEN_LCC) { + ret = ufshcd_disable_device_tx_lcc(hba); + if (ret) + goto out; + } + + /* Include any host controller configuration via UIC commands */ + ret = ufshcd_vops_link_startup_notify(hba, POST_CHANGE); + if (ret) + goto out; + + /* Clear UECPA once due to LINERESET has happened during LINK_STARTUP */ + ufshcd_readl(hba, REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER); + ret = ufshcd_make_hba_operational(hba); +out: + if (ret) { + dev_err(hba->dev, "link startup failed %d\n", ret); + ufshcd_print_host_state(hba); + ufshcd_print_pwr_info(hba); + ufshcd_print_evt_hist(hba); + } + return ret; +} + +/** + * ufshcd_verify_dev_init() - Verify device initialization + * @hba: per-adapter instance + * + * Send NOP OUT UPIU and wait for NOP IN response to check whether the + * device Transport Protocol (UTP) layer is ready after a reset. + * If the UTP layer at the device side is not initialized, it may + * not respond with NOP IN UPIU within timeout of %NOP_OUT_TIMEOUT + * and we retry sending NOP OUT for %NOP_OUT_RETRIES iterations. + */ +static int ufshcd_verify_dev_init(struct ufs_hba *hba) +{ + int err = 0; + int retries; + + ufshcd_hold(hba, false); + mutex_lock(&hba->dev_cmd.lock); + for (retries = NOP_OUT_RETRIES; retries > 0; retries--) { + err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_NOP, + hba->nop_out_timeout); + + if (!err || err == -ETIMEDOUT) + break; + + dev_dbg(hba->dev, "%s: error %d retrying\n", __func__, err); + } + mutex_unlock(&hba->dev_cmd.lock); + ufshcd_release(hba); + + if (err) + dev_err(hba->dev, "%s: NOP OUT failed %d\n", __func__, err); + return err; +} + +/** + * ufshcd_set_queue_depth - set lun queue depth + * @sdev: pointer to SCSI device + * + * Read bLUQueueDepth value and activate scsi tagged command + * queueing. For WLUN, queue depth is set to 1. For best-effort + * cases (bLUQueueDepth = 0) the queue depth is set to a maximum + * value that host can queue. + */ +static void ufshcd_set_queue_depth(struct scsi_device *sdev) +{ + int ret = 0; + u8 lun_qdepth; + struct ufs_hba *hba; + + hba = shost_priv(sdev->host); + + lun_qdepth = hba->nutrs; + ret = ufshcd_read_unit_desc_param(hba, + ufshcd_scsi_to_upiu_lun(sdev->lun), + UNIT_DESC_PARAM_LU_Q_DEPTH, + &lun_qdepth, + sizeof(lun_qdepth)); + + /* Some WLUN doesn't support unit descriptor */ + if (ret == -EOPNOTSUPP) + lun_qdepth = 1; + else if (!lun_qdepth) + /* eventually, we can figure out the real queue depth */ + lun_qdepth = hba->nutrs; + else + lun_qdepth = min_t(int, lun_qdepth, hba->nutrs); + + dev_dbg(hba->dev, "%s: activate tcq with queue depth %d\n", + __func__, lun_qdepth); + scsi_change_queue_depth(sdev, lun_qdepth); +} + +/* + * ufshcd_get_lu_wp - returns the "b_lu_write_protect" from UNIT DESCRIPTOR + * @hba: per-adapter instance + * @lun: UFS device lun id + * @b_lu_write_protect: pointer to buffer to hold the LU's write protect info + * + * Returns 0 in case of success and b_lu_write_protect status would be returned + * @b_lu_write_protect parameter. + * Returns -ENOTSUPP if reading b_lu_write_protect is not supported. + * Returns -EINVAL in case of invalid parameters passed to this function. + */ +static int ufshcd_get_lu_wp(struct ufs_hba *hba, + u8 lun, + u8 *b_lu_write_protect) +{ + int ret; + + if (!b_lu_write_protect) + ret = -EINVAL; + /* + * According to UFS device spec, RPMB LU can't be write + * protected so skip reading bLUWriteProtect parameter for + * it. For other W-LUs, UNIT DESCRIPTOR is not available. + */ + else if (lun >= hba->dev_info.max_lu_supported) + ret = -ENOTSUPP; + else + ret = ufshcd_read_unit_desc_param(hba, + lun, + UNIT_DESC_PARAM_LU_WR_PROTECT, + b_lu_write_protect, + sizeof(*b_lu_write_protect)); + return ret; +} + +/** + * ufshcd_get_lu_power_on_wp_status - get LU's power on write protect + * status + * @hba: per-adapter instance + * @sdev: pointer to SCSI device + * + */ +static inline void ufshcd_get_lu_power_on_wp_status(struct ufs_hba *hba, + const struct scsi_device *sdev) +{ + if (hba->dev_info.f_power_on_wp_en && + !hba->dev_info.is_lu_power_on_wp) { + u8 b_lu_write_protect; + + if (!ufshcd_get_lu_wp(hba, ufshcd_scsi_to_upiu_lun(sdev->lun), + &b_lu_write_protect) && + (b_lu_write_protect == UFS_LU_POWER_ON_WP)) + hba->dev_info.is_lu_power_on_wp = true; + } +} + +/** + * ufshcd_setup_links - associate link b/w device wlun and other luns + * @sdev: pointer to SCSI device + * @hba: pointer to ufs hba + */ +static void ufshcd_setup_links(struct ufs_hba *hba, struct scsi_device *sdev) +{ + struct device_link *link; + + /* + * Device wlun is the supplier & rest of the luns are consumers. + * This ensures that device wlun suspends after all other luns. + */ + if (hba->ufs_device_wlun) { + link = device_link_add(&sdev->sdev_gendev, + &hba->ufs_device_wlun->sdev_gendev, + DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE); + if (!link) { + dev_err(&sdev->sdev_gendev, "Failed establishing link - %s\n", + dev_name(&hba->ufs_device_wlun->sdev_gendev)); + return; + } + hba->luns_avail--; + /* Ignore REPORT_LUN wlun probing */ + if (hba->luns_avail == 1) { + ufshcd_rpm_put(hba); + return; + } + } else { + /* + * Device wlun is probed. The assumption is that WLUNs are + * scanned before other LUNs. + */ + hba->luns_avail--; + } +} + +/** + * ufshcd_slave_alloc - handle initial SCSI device configurations + * @sdev: pointer to SCSI device + * + * Returns success + */ +static int ufshcd_slave_alloc(struct scsi_device *sdev) +{ + struct ufs_hba *hba; + + hba = shost_priv(sdev->host); + + /* Mode sense(6) is not supported by UFS, so use Mode sense(10) */ + sdev->use_10_for_ms = 1; + + /* DBD field should be set to 1 in mode sense(10) */ + sdev->set_dbd_for_ms = 1; + + /* allow SCSI layer to restart the device in case of errors */ + sdev->allow_restart = 1; + + /* REPORT SUPPORTED OPERATION CODES is not supported */ + sdev->no_report_opcodes = 1; + + /* WRITE_SAME command is not supported */ + sdev->no_write_same = 1; + + ufshcd_set_queue_depth(sdev); + + ufshcd_get_lu_power_on_wp_status(hba, sdev); + + ufshcd_setup_links(hba, sdev); + + return 0; +} + +/** + * ufshcd_change_queue_depth - change queue depth + * @sdev: pointer to SCSI device + * @depth: required depth to set + * + * Change queue depth and make sure the max. limits are not crossed. + */ +static int ufshcd_change_queue_depth(struct scsi_device *sdev, int depth) +{ + return scsi_change_queue_depth(sdev, min(depth, sdev->host->can_queue)); +} + +static void ufshcd_hpb_destroy(struct ufs_hba *hba, struct scsi_device *sdev) +{ + /* skip well-known LU */ + if ((sdev->lun >= UFS_UPIU_MAX_UNIT_NUM_ID) || + !(hba->dev_info.hpb_enabled) || !ufshpb_is_allowed(hba)) + return; + + ufshpb_destroy_lu(hba, sdev); +} + +static void ufshcd_hpb_configure(struct ufs_hba *hba, struct scsi_device *sdev) +{ + /* skip well-known LU */ + if ((sdev->lun >= UFS_UPIU_MAX_UNIT_NUM_ID) || + !(hba->dev_info.hpb_enabled) || !ufshpb_is_allowed(hba)) + return; + + ufshpb_init_hpb_lu(hba, sdev); +} + +/** + * ufshcd_slave_configure - adjust SCSI device configurations + * @sdev: pointer to SCSI device + */ +static int ufshcd_slave_configure(struct scsi_device *sdev) +{ + struct ufs_hba *hba = shost_priv(sdev->host); + struct request_queue *q = sdev->request_queue; + + ufshcd_hpb_configure(hba, sdev); + + blk_queue_update_dma_pad(q, PRDT_DATA_BYTE_COUNT_PAD - 1); + if (hba->quirks & UFSHCD_QUIRK_4KB_DMA_ALIGNMENT) + blk_queue_update_dma_alignment(q, 4096 - 1); + /* + * Block runtime-pm until all consumers are added. + * Refer ufshcd_setup_links(). + */ + if (is_device_wlun(sdev)) + pm_runtime_get_noresume(&sdev->sdev_gendev); + else if (ufshcd_is_rpm_autosuspend_allowed(hba)) + sdev->rpm_autosuspend = 1; + /* + * Do not print messages during runtime PM to avoid never-ending cycles + * of messages written back to storage by user space causing runtime + * resume, causing more messages and so on. + */ + sdev->silence_suspend = 1; + + ufshcd_crypto_register(hba, q); + + return 0; +} + +/** + * ufshcd_slave_destroy - remove SCSI device configurations + * @sdev: pointer to SCSI device + */ +static void ufshcd_slave_destroy(struct scsi_device *sdev) +{ + struct ufs_hba *hba; + unsigned long flags; + + hba = shost_priv(sdev->host); + + ufshcd_hpb_destroy(hba, sdev); + + /* Drop the reference as it won't be needed anymore */ + if (ufshcd_scsi_to_upiu_lun(sdev->lun) == UFS_UPIU_UFS_DEVICE_WLUN) { + spin_lock_irqsave(hba->host->host_lock, flags); + hba->ufs_device_wlun = NULL; + spin_unlock_irqrestore(hba->host->host_lock, flags); + } else if (hba->ufs_device_wlun) { + struct device *supplier = NULL; + + /* Ensure UFS Device WLUN exists and does not disappear */ + spin_lock_irqsave(hba->host->host_lock, flags); + if (hba->ufs_device_wlun) { + supplier = &hba->ufs_device_wlun->sdev_gendev; + get_device(supplier); + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + + if (supplier) { + /* + * If a LUN fails to probe (e.g. absent BOOT WLUN), the + * device will not have been registered but can still + * have a device link holding a reference to the device. + */ + device_link_remove(&sdev->sdev_gendev, supplier); + put_device(supplier); + } + } +} + +/** + * ufshcd_scsi_cmd_status - Update SCSI command result based on SCSI status + * @lrbp: pointer to local reference block of completed command + * @scsi_status: SCSI command status + * + * Returns value base on SCSI command status + */ +static inline int +ufshcd_scsi_cmd_status(struct ufshcd_lrb *lrbp, int scsi_status) +{ + int result = 0; + + switch (scsi_status) { + case SAM_STAT_CHECK_CONDITION: + ufshcd_copy_sense_data(lrbp); + fallthrough; + case SAM_STAT_GOOD: + result |= DID_OK << 16 | scsi_status; + break; + case SAM_STAT_TASK_SET_FULL: + case SAM_STAT_BUSY: + case SAM_STAT_TASK_ABORTED: + ufshcd_copy_sense_data(lrbp); + result |= scsi_status; + break; + default: + result |= DID_ERROR << 16; + break; + } /* end of switch */ + + return result; +} + +/** + * ufshcd_transfer_rsp_status - Get overall status of the response + * @hba: per adapter instance + * @lrbp: pointer to local reference block of completed command + * + * Returns result of the command to notify SCSI midlayer + */ +static inline int +ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) +{ + int result = 0; + int scsi_status; + enum utp_ocs ocs; + + /* overall command status of utrd */ + ocs = ufshcd_get_tr_ocs(lrbp); + + if (hba->quirks & UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR) { + if (be32_to_cpu(lrbp->ucd_rsp_ptr->header.dword_1) & + MASK_RSP_UPIU_RESULT) + ocs = OCS_SUCCESS; + } + + switch (ocs) { + case OCS_SUCCESS: + result = ufshcd_get_req_rsp(lrbp->ucd_rsp_ptr); + hba->ufs_stats.last_hibern8_exit_tstamp = ktime_set(0, 0); + switch (result) { + case UPIU_TRANSACTION_RESPONSE: + /* + * get the response UPIU result to extract + * the SCSI command status + */ + result = ufshcd_get_rsp_upiu_result(lrbp->ucd_rsp_ptr); + + /* + * get the result based on SCSI status response + * to notify the SCSI midlayer of the command status + */ + scsi_status = result & MASK_SCSI_STATUS; + result = ufshcd_scsi_cmd_status(lrbp, scsi_status); + + /* + * Currently we are only supporting BKOPs exception + * events hence we can ignore BKOPs exception event + * during power management callbacks. BKOPs exception + * event is not expected to be raised in runtime suspend + * callback as it allows the urgent bkops. + * During system suspend, we are anyway forcefully + * disabling the bkops and if urgent bkops is needed + * it will be enabled on system resume. Long term + * solution could be to abort the system suspend if + * UFS device needs urgent BKOPs. + */ + if (!hba->pm_op_in_progress && + !ufshcd_eh_in_progress(hba) && + ufshcd_is_exception_event(lrbp->ucd_rsp_ptr)) + /* Flushed in suspend */ + schedule_work(&hba->eeh_work); + + if (scsi_status == SAM_STAT_GOOD) + ufshpb_rsp_upiu(hba, lrbp); + break; + case UPIU_TRANSACTION_REJECT_UPIU: + /* TODO: handle Reject UPIU Response */ + result = DID_ERROR << 16; + dev_err(hba->dev, + "Reject UPIU not fully implemented\n"); + break; + default: + dev_err(hba->dev, + "Unexpected request response code = %x\n", + result); + result = DID_ERROR << 16; + break; + } + break; + case OCS_ABORTED: + result |= DID_ABORT << 16; + break; + case OCS_INVALID_COMMAND_STATUS: + result |= DID_REQUEUE << 16; + break; + case OCS_INVALID_CMD_TABLE_ATTR: + case OCS_INVALID_PRDT_ATTR: + case OCS_MISMATCH_DATA_BUF_SIZE: + case OCS_MISMATCH_RESP_UPIU_SIZE: + case OCS_PEER_COMM_FAILURE: + case OCS_FATAL_ERROR: + case OCS_DEVICE_FATAL_ERROR: + case OCS_INVALID_CRYPTO_CONFIG: + case OCS_GENERAL_CRYPTO_ERROR: + default: + result |= DID_ERROR << 16; + dev_err(hba->dev, + "OCS error from controller = %x for tag %d\n", + ocs, lrbp->task_tag); + ufshcd_print_evt_hist(hba); + ufshcd_print_host_state(hba); + break; + } /* end of switch */ + + if ((host_byte(result) != DID_OK) && + (host_byte(result) != DID_REQUEUE) && !hba->silence_err_logs) + ufshcd_print_trs(hba, 1 << lrbp->task_tag, true); + return result; +} + +static bool ufshcd_is_auto_hibern8_error(struct ufs_hba *hba, + u32 intr_mask) +{ + if (!ufshcd_is_auto_hibern8_supported(hba) || + !ufshcd_is_auto_hibern8_enabled(hba)) + return false; + + if (!(intr_mask & UFSHCD_UIC_HIBERN8_MASK)) + return false; + + if (hba->active_uic_cmd && + (hba->active_uic_cmd->command == UIC_CMD_DME_HIBER_ENTER || + hba->active_uic_cmd->command == UIC_CMD_DME_HIBER_EXIT)) + return false; + + return true; +} + +/** + * ufshcd_uic_cmd_compl - handle completion of uic command + * @hba: per adapter instance + * @intr_status: interrupt status generated by the controller + * + * Returns + * IRQ_HANDLED - If interrupt is valid + * IRQ_NONE - If invalid interrupt + */ +static irqreturn_t ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status) +{ + irqreturn_t retval = IRQ_NONE; + + spin_lock(hba->host->host_lock); + if (ufshcd_is_auto_hibern8_error(hba, intr_status)) + hba->errors |= (UFSHCD_UIC_HIBERN8_MASK & intr_status); + + if ((intr_status & UIC_COMMAND_COMPL) && hba->active_uic_cmd) { + hba->active_uic_cmd->argument2 |= + ufshcd_get_uic_cmd_result(hba); + hba->active_uic_cmd->argument3 = + ufshcd_get_dme_attr_val(hba); + if (!hba->uic_async_done) + hba->active_uic_cmd->cmd_active = 0; + complete(&hba->active_uic_cmd->done); + retval = IRQ_HANDLED; + } + + if ((intr_status & UFSHCD_UIC_PWR_MASK) && hba->uic_async_done) { + hba->active_uic_cmd->cmd_active = 0; + complete(hba->uic_async_done); + retval = IRQ_HANDLED; + } + + if (retval == IRQ_HANDLED) + ufshcd_add_uic_command_trace(hba, hba->active_uic_cmd, + UFS_CMD_COMP); + spin_unlock(hba->host->host_lock); + return retval; +} + +/* Release the resources allocated for processing a SCSI command. */ +static void ufshcd_release_scsi_cmd(struct ufs_hba *hba, + struct ufshcd_lrb *lrbp) +{ + struct scsi_cmnd *cmd = lrbp->cmd; + + scsi_dma_unmap(cmd); + lrbp->cmd = NULL; /* Mark the command as completed. */ + ufshcd_release(hba); + ufshcd_clk_scaling_update_busy(hba); +} + +/** + * __ufshcd_transfer_req_compl - handle SCSI and query command completion + * @hba: per adapter instance + * @completed_reqs: bitmask that indicates which requests to complete + */ +static void __ufshcd_transfer_req_compl(struct ufs_hba *hba, + unsigned long completed_reqs) +{ + struct ufshcd_lrb *lrbp; + struct scsi_cmnd *cmd; + int index; + + for_each_set_bit(index, &completed_reqs, hba->nutrs) { + lrbp = &hba->lrb[index]; + lrbp->compl_time_stamp = ktime_get(); + lrbp->compl_time_stamp_local_clock = local_clock(); + cmd = lrbp->cmd; + if (cmd) { + if (unlikely(ufshcd_should_inform_monitor(hba, lrbp))) + ufshcd_update_monitor(hba, lrbp); + ufshcd_add_command_trace(hba, index, UFS_CMD_COMP); + cmd->result = ufshcd_transfer_rsp_status(hba, lrbp); + ufshcd_release_scsi_cmd(hba, lrbp); + /* Do not touch lrbp after scsi done */ + scsi_done(cmd); + } else if (lrbp->command_type == UTP_CMD_TYPE_DEV_MANAGE || + lrbp->command_type == UTP_CMD_TYPE_UFS_STORAGE) { + if (hba->dev_cmd.complete) { + ufshcd_add_command_trace(hba, index, + UFS_DEV_COMP); + complete(hba->dev_cmd.complete); + ufshcd_clk_scaling_update_busy(hba); + } + } + } +} + +/* Any value that is not an existing queue number is fine for this constant. */ +enum { + UFSHCD_POLL_FROM_INTERRUPT_CONTEXT = -1 +}; + +static void ufshcd_clear_polled(struct ufs_hba *hba, + unsigned long *completed_reqs) +{ + int tag; + + for_each_set_bit(tag, completed_reqs, hba->nutrs) { + struct scsi_cmnd *cmd = hba->lrb[tag].cmd; + + if (!cmd) + continue; + if (scsi_cmd_to_rq(cmd)->cmd_flags & REQ_POLLED) + __clear_bit(tag, completed_reqs); + } +} + +/* + * Returns > 0 if one or more commands have been completed or 0 if no + * requests have been completed. + */ +static int ufshcd_poll(struct Scsi_Host *shost, unsigned int queue_num) +{ + struct ufs_hba *hba = shost_priv(shost); + unsigned long completed_reqs, flags; + u32 tr_doorbell; + + spin_lock_irqsave(&hba->outstanding_lock, flags); + tr_doorbell = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); + completed_reqs = ~tr_doorbell & hba->outstanding_reqs; + WARN_ONCE(completed_reqs & ~hba->outstanding_reqs, + "completed: %#lx; outstanding: %#lx\n", completed_reqs, + hba->outstanding_reqs); + if (queue_num == UFSHCD_POLL_FROM_INTERRUPT_CONTEXT) { + /* Do not complete polled requests from interrupt context. */ + ufshcd_clear_polled(hba, &completed_reqs); + } + hba->outstanding_reqs &= ~completed_reqs; + spin_unlock_irqrestore(&hba->outstanding_lock, flags); + + if (completed_reqs) + __ufshcd_transfer_req_compl(hba, completed_reqs); + + return completed_reqs != 0; +} + +/** + * ufshcd_transfer_req_compl - handle SCSI and query command completion + * @hba: per adapter instance + * + * Returns + * IRQ_HANDLED - If interrupt is valid + * IRQ_NONE - If invalid interrupt + */ +static irqreturn_t ufshcd_transfer_req_compl(struct ufs_hba *hba) +{ + /* Resetting interrupt aggregation counters first and reading the + * DOOR_BELL afterward allows us to handle all the completed requests. + * In order to prevent other interrupts starvation the DB is read once + * after reset. The down side of this solution is the possibility of + * false interrupt if device completes another request after resetting + * aggregation and before reading the DB. + */ + if (ufshcd_is_intr_aggr_allowed(hba) && + !(hba->quirks & UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR)) + ufshcd_reset_intr_aggr(hba); + + if (ufs_fail_completion()) + return IRQ_HANDLED; + + /* + * Ignore the ufshcd_poll() return value and return IRQ_HANDLED since we + * do not want polling to trigger spurious interrupt complaints. + */ + ufshcd_poll(hba->host, UFSHCD_POLL_FROM_INTERRUPT_CONTEXT); + + return IRQ_HANDLED; +} + +int __ufshcd_write_ee_control(struct ufs_hba *hba, u32 ee_ctrl_mask) +{ + return ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR, + QUERY_ATTR_IDN_EE_CONTROL, 0, 0, + &ee_ctrl_mask); +} + +int ufshcd_write_ee_control(struct ufs_hba *hba) +{ + int err; + + mutex_lock(&hba->ee_ctrl_mutex); + err = __ufshcd_write_ee_control(hba, hba->ee_ctrl_mask); + mutex_unlock(&hba->ee_ctrl_mutex); + if (err) + dev_err(hba->dev, "%s: failed to write ee control %d\n", + __func__, err); + return err; +} + +int ufshcd_update_ee_control(struct ufs_hba *hba, u16 *mask, + const u16 *other_mask, u16 set, u16 clr) +{ + u16 new_mask, ee_ctrl_mask; + int err = 0; + + mutex_lock(&hba->ee_ctrl_mutex); + new_mask = (*mask & ~clr) | set; + ee_ctrl_mask = new_mask | *other_mask; + if (ee_ctrl_mask != hba->ee_ctrl_mask) + err = __ufshcd_write_ee_control(hba, ee_ctrl_mask); + /* Still need to update 'mask' even if 'ee_ctrl_mask' was unchanged */ + if (!err) { + hba->ee_ctrl_mask = ee_ctrl_mask; + *mask = new_mask; + } + mutex_unlock(&hba->ee_ctrl_mutex); + return err; +} + +/** + * ufshcd_disable_ee - disable exception event + * @hba: per-adapter instance + * @mask: exception event to disable + * + * Disables exception event in the device so that the EVENT_ALERT + * bit is not set. + * + * Returns zero on success, non-zero error value on failure. + */ +static inline int ufshcd_disable_ee(struct ufs_hba *hba, u16 mask) +{ + return ufshcd_update_ee_drv_mask(hba, 0, mask); +} + +/** + * ufshcd_enable_ee - enable exception event + * @hba: per-adapter instance + * @mask: exception event to enable + * + * Enable corresponding exception event in the device to allow + * device to alert host in critical scenarios. + * + * Returns zero on success, non-zero error value on failure. + */ +static inline int ufshcd_enable_ee(struct ufs_hba *hba, u16 mask) +{ + return ufshcd_update_ee_drv_mask(hba, mask, 0); +} + +/** + * ufshcd_enable_auto_bkops - Allow device managed BKOPS + * @hba: per-adapter instance + * + * Allow device to manage background operations on its own. Enabling + * this might lead to inconsistent latencies during normal data transfers + * as the device is allowed to manage its own way of handling background + * operations. + * + * Returns zero on success, non-zero on failure. + */ +static int ufshcd_enable_auto_bkops(struct ufs_hba *hba) +{ + int err = 0; + + if (hba->auto_bkops_enabled) + goto out; + + err = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_SET_FLAG, + QUERY_FLAG_IDN_BKOPS_EN, 0, NULL); + if (err) { + dev_err(hba->dev, "%s: failed to enable bkops %d\n", + __func__, err); + goto out; + } + + hba->auto_bkops_enabled = true; + trace_ufshcd_auto_bkops_state(dev_name(hba->dev), "Enabled"); + + /* No need of URGENT_BKOPS exception from the device */ + err = ufshcd_disable_ee(hba, MASK_EE_URGENT_BKOPS); + if (err) + dev_err(hba->dev, "%s: failed to disable exception event %d\n", + __func__, err); +out: + return err; +} + +/** + * ufshcd_disable_auto_bkops - block device in doing background operations + * @hba: per-adapter instance + * + * Disabling background operations improves command response latency but + * has drawback of device moving into critical state where the device is + * not-operable. Make sure to call ufshcd_enable_auto_bkops() whenever the + * host is idle so that BKOPS are managed effectively without any negative + * impacts. + * + * Returns zero on success, non-zero on failure. + */ +static int ufshcd_disable_auto_bkops(struct ufs_hba *hba) +{ + int err = 0; + + if (!hba->auto_bkops_enabled) + goto out; + + /* + * If host assisted BKOPs is to be enabled, make sure + * urgent bkops exception is allowed. + */ + err = ufshcd_enable_ee(hba, MASK_EE_URGENT_BKOPS); + if (err) { + dev_err(hba->dev, "%s: failed to enable exception event %d\n", + __func__, err); + goto out; + } + + err = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_CLEAR_FLAG, + QUERY_FLAG_IDN_BKOPS_EN, 0, NULL); + if (err) { + dev_err(hba->dev, "%s: failed to disable bkops %d\n", + __func__, err); + ufshcd_disable_ee(hba, MASK_EE_URGENT_BKOPS); + goto out; + } + + hba->auto_bkops_enabled = false; + trace_ufshcd_auto_bkops_state(dev_name(hba->dev), "Disabled"); + hba->is_urgent_bkops_lvl_checked = false; +out: + return err; +} + +/** + * ufshcd_force_reset_auto_bkops - force reset auto bkops state + * @hba: per adapter instance + * + * After a device reset the device may toggle the BKOPS_EN flag + * to default value. The s/w tracking variables should be updated + * as well. This function would change the auto-bkops state based on + * UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND. + */ +static void ufshcd_force_reset_auto_bkops(struct ufs_hba *hba) +{ + if (ufshcd_keep_autobkops_enabled_except_suspend(hba)) { + hba->auto_bkops_enabled = false; + hba->ee_ctrl_mask |= MASK_EE_URGENT_BKOPS; + ufshcd_enable_auto_bkops(hba); + } else { + hba->auto_bkops_enabled = true; + hba->ee_ctrl_mask &= ~MASK_EE_URGENT_BKOPS; + ufshcd_disable_auto_bkops(hba); + } + hba->urgent_bkops_lvl = BKOPS_STATUS_PERF_IMPACT; + hba->is_urgent_bkops_lvl_checked = false; +} + +static inline int ufshcd_get_bkops_status(struct ufs_hba *hba, u32 *status) +{ + return ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR, + QUERY_ATTR_IDN_BKOPS_STATUS, 0, 0, status); +} + +/** + * ufshcd_bkops_ctrl - control the auto bkops based on current bkops status + * @hba: per-adapter instance + * @status: bkops_status value + * + * Read the bkops_status from the UFS device and Enable fBackgroundOpsEn + * flag in the device to permit background operations if the device + * bkops_status is greater than or equal to "status" argument passed to + * this function, disable otherwise. + * + * Returns 0 for success, non-zero in case of failure. + * + * NOTE: Caller of this function can check the "hba->auto_bkops_enabled" flag + * to know whether auto bkops is enabled or disabled after this function + * returns control to it. + */ +static int ufshcd_bkops_ctrl(struct ufs_hba *hba, + enum bkops_status status) +{ + int err; + u32 curr_status = 0; + + err = ufshcd_get_bkops_status(hba, &curr_status); + if (err) { + dev_err(hba->dev, "%s: failed to get BKOPS status %d\n", + __func__, err); + goto out; + } else if (curr_status > BKOPS_STATUS_MAX) { + dev_err(hba->dev, "%s: invalid BKOPS status %d\n", + __func__, curr_status); + err = -EINVAL; + goto out; + } + + if (curr_status >= status) + err = ufshcd_enable_auto_bkops(hba); + else + err = ufshcd_disable_auto_bkops(hba); +out: + return err; +} + +/** + * ufshcd_urgent_bkops - handle urgent bkops exception event + * @hba: per-adapter instance + * + * Enable fBackgroundOpsEn flag in the device to permit background + * operations. + * + * If BKOPs is enabled, this function returns 0, 1 if the bkops in not enabled + * and negative error value for any other failure. + */ +static int ufshcd_urgent_bkops(struct ufs_hba *hba) +{ + return ufshcd_bkops_ctrl(hba, hba->urgent_bkops_lvl); +} + +static inline int ufshcd_get_ee_status(struct ufs_hba *hba, u32 *status) +{ + return ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR, + QUERY_ATTR_IDN_EE_STATUS, 0, 0, status); +} + +static void ufshcd_bkops_exception_event_handler(struct ufs_hba *hba) +{ + int err; + u32 curr_status = 0; + + if (hba->is_urgent_bkops_lvl_checked) + goto enable_auto_bkops; + + err = ufshcd_get_bkops_status(hba, &curr_status); + if (err) { + dev_err(hba->dev, "%s: failed to get BKOPS status %d\n", + __func__, err); + goto out; + } + + /* + * We are seeing that some devices are raising the urgent bkops + * exception events even when BKOPS status doesn't indicate performace + * impacted or critical. Handle these device by determining their urgent + * bkops status at runtime. + */ + if (curr_status < BKOPS_STATUS_PERF_IMPACT) { + dev_err(hba->dev, "%s: device raised urgent BKOPS exception for bkops status %d\n", + __func__, curr_status); + /* update the current status as the urgent bkops level */ + hba->urgent_bkops_lvl = curr_status; + hba->is_urgent_bkops_lvl_checked = true; + } + +enable_auto_bkops: + err = ufshcd_enable_auto_bkops(hba); +out: + if (err < 0) + dev_err(hba->dev, "%s: failed to handle urgent bkops %d\n", + __func__, err); +} + +static void ufshcd_temp_exception_event_handler(struct ufs_hba *hba, u16 status) +{ + u32 value; + + if (ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR, + QUERY_ATTR_IDN_CASE_ROUGH_TEMP, 0, 0, &value)) + return; + + dev_info(hba->dev, "exception Tcase %d\n", value - 80); + + ufs_hwmon_notify_event(hba, status & MASK_EE_URGENT_TEMP); + + /* + * A placeholder for the platform vendors to add whatever additional + * steps required + */ +} + +static int __ufshcd_wb_toggle(struct ufs_hba *hba, bool set, enum flag_idn idn) +{ + u8 index; + enum query_opcode opcode = set ? UPIU_QUERY_OPCODE_SET_FLAG : + UPIU_QUERY_OPCODE_CLEAR_FLAG; + + index = ufshcd_wb_get_query_index(hba); + return ufshcd_query_flag_retry(hba, opcode, idn, index, NULL); +} + +int ufshcd_wb_toggle(struct ufs_hba *hba, bool enable) +{ + int ret; + + if (!ufshcd_is_wb_allowed(hba) || + hba->dev_info.wb_enabled == enable) + return 0; + + ret = __ufshcd_wb_toggle(hba, enable, QUERY_FLAG_IDN_WB_EN); + if (ret) { + dev_err(hba->dev, "%s: Write Booster %s failed %d\n", + __func__, enable ? "enabling" : "disabling", ret); + return ret; + } + + hba->dev_info.wb_enabled = enable; + dev_dbg(hba->dev, "%s: Write Booster %s\n", + __func__, enable ? "enabled" : "disabled"); + + return ret; +} + +static void ufshcd_wb_toggle_buf_flush_during_h8(struct ufs_hba *hba, + bool enable) +{ + int ret; + + ret = __ufshcd_wb_toggle(hba, enable, + QUERY_FLAG_IDN_WB_BUFF_FLUSH_DURING_HIBERN8); + if (ret) { + dev_err(hba->dev, "%s: WB-Buf Flush during H8 %s failed %d\n", + __func__, enable ? "enabling" : "disabling", ret); + return; + } + dev_dbg(hba->dev, "%s: WB-Buf Flush during H8 %s\n", + __func__, enable ? "enabled" : "disabled"); +} + +int ufshcd_wb_toggle_buf_flush(struct ufs_hba *hba, bool enable) +{ + int ret; + + if (!ufshcd_is_wb_allowed(hba) || + hba->dev_info.wb_buf_flush_enabled == enable) + return 0; + + ret = __ufshcd_wb_toggle(hba, enable, QUERY_FLAG_IDN_WB_BUFF_FLUSH_EN); + if (ret) { + dev_err(hba->dev, "%s: WB-Buf Flush %s failed %d\n", + __func__, enable ? "enabling" : "disabling", ret); + return ret; + } + + hba->dev_info.wb_buf_flush_enabled = enable; + dev_dbg(hba->dev, "%s: WB-Buf Flush %s\n", + __func__, enable ? "enabled" : "disabled"); + + return ret; +} + +static bool ufshcd_wb_presrv_usrspc_keep_vcc_on(struct ufs_hba *hba, + u32 avail_buf) +{ + u32 cur_buf; + int ret; + u8 index; + + index = ufshcd_wb_get_query_index(hba); + ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR, + QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE, + index, 0, &cur_buf); + if (ret) { + dev_err(hba->dev, "%s: dCurWriteBoosterBufferSize read failed %d\n", + __func__, ret); + return false; + } + + if (!cur_buf) { + dev_info(hba->dev, "dCurWBBuf: %d WB disabled until free-space is available\n", + cur_buf); + return false; + } + /* Let it continue to flush when available buffer exceeds threshold */ + return avail_buf < hba->vps->wb_flush_threshold; +} + +static void ufshcd_wb_force_disable(struct ufs_hba *hba) +{ + if (ufshcd_is_wb_buf_flush_allowed(hba)) + ufshcd_wb_toggle_buf_flush(hba, false); + + ufshcd_wb_toggle_buf_flush_during_h8(hba, false); + ufshcd_wb_toggle(hba, false); + hba->caps &= ~UFSHCD_CAP_WB_EN; + + dev_info(hba->dev, "%s: WB force disabled\n", __func__); +} + +static bool ufshcd_is_wb_buf_lifetime_available(struct ufs_hba *hba) +{ + u32 lifetime; + int ret; + u8 index; + + index = ufshcd_wb_get_query_index(hba); + ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR, + QUERY_ATTR_IDN_WB_BUFF_LIFE_TIME_EST, + index, 0, &lifetime); + if (ret) { + dev_err(hba->dev, + "%s: bWriteBoosterBufferLifeTimeEst read failed %d\n", + __func__, ret); + return false; + } + + if (lifetime == UFS_WB_EXCEED_LIFETIME) { + dev_err(hba->dev, "%s: WB buf lifetime is exhausted 0x%02X\n", + __func__, lifetime); + return false; + } + + dev_dbg(hba->dev, "%s: WB buf lifetime is 0x%02X\n", + __func__, lifetime); + + return true; +} + +static bool ufshcd_wb_need_flush(struct ufs_hba *hba) +{ + int ret; + u32 avail_buf; + u8 index; + + if (!ufshcd_is_wb_allowed(hba)) + return false; + + if (!ufshcd_is_wb_buf_lifetime_available(hba)) { + ufshcd_wb_force_disable(hba); + return false; + } + + /* + * The ufs device needs the vcc to be ON to flush. + * With user-space reduction enabled, it's enough to enable flush + * by checking only the available buffer. The threshold + * defined here is > 90% full. + * With user-space preserved enabled, the current-buffer + * should be checked too because the wb buffer size can reduce + * when disk tends to be full. This info is provided by current + * buffer (dCurrentWriteBoosterBufferSize). There's no point in + * keeping vcc on when current buffer is empty. + */ + index = ufshcd_wb_get_query_index(hba); + ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR, + QUERY_ATTR_IDN_AVAIL_WB_BUFF_SIZE, + index, 0, &avail_buf); + if (ret) { + dev_warn(hba->dev, "%s: dAvailableWriteBoosterBufferSize read failed %d\n", + __func__, ret); + return false; + } + + if (!hba->dev_info.b_presrv_uspc_en) + return avail_buf <= UFS_WB_BUF_REMAIN_PERCENT(10); + + return ufshcd_wb_presrv_usrspc_keep_vcc_on(hba, avail_buf); +} + +static void ufshcd_rpm_dev_flush_recheck_work(struct work_struct *work) +{ + struct ufs_hba *hba = container_of(to_delayed_work(work), + struct ufs_hba, + rpm_dev_flush_recheck_work); + /* + * To prevent unnecessary VCC power drain after device finishes + * WriteBooster buffer flush or Auto BKOPs, force runtime resume + * after a certain delay to recheck the threshold by next runtime + * suspend. + */ + ufshcd_rpm_get_sync(hba); + ufshcd_rpm_put_sync(hba); +} + +/** + * ufshcd_exception_event_handler - handle exceptions raised by device + * @work: pointer to work data + * + * Read bExceptionEventStatus attribute from the device and handle the + * exception event accordingly. + */ +static void ufshcd_exception_event_handler(struct work_struct *work) +{ + struct ufs_hba *hba; + int err; + u32 status = 0; + hba = container_of(work, struct ufs_hba, eeh_work); + + ufshcd_scsi_block_requests(hba); + err = ufshcd_get_ee_status(hba, &status); + if (err) { + dev_err(hba->dev, "%s: failed to get exception status %d\n", + __func__, err); + goto out; + } + + trace_ufshcd_exception_event(dev_name(hba->dev), status); + + if (status & hba->ee_drv_mask & MASK_EE_URGENT_BKOPS) + ufshcd_bkops_exception_event_handler(hba); + + if (status & hba->ee_drv_mask & MASK_EE_URGENT_TEMP) + ufshcd_temp_exception_event_handler(hba, status); + + ufs_debugfs_exception_event(hba, status); +out: + ufshcd_scsi_unblock_requests(hba); +} + +/* Complete requests that have door-bell cleared */ +static void ufshcd_complete_requests(struct ufs_hba *hba) +{ + ufshcd_transfer_req_compl(hba); + ufshcd_tmc_handler(hba); +} + +/** + * ufshcd_quirk_dl_nac_errors - This function checks if error handling is + * to recover from the DL NAC errors or not. + * @hba: per-adapter instance + * + * Returns true if error handling is required, false otherwise + */ +static bool ufshcd_quirk_dl_nac_errors(struct ufs_hba *hba) +{ + unsigned long flags; + bool err_handling = true; + + spin_lock_irqsave(hba->host->host_lock, flags); + /* + * UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS only workaround the + * device fatal error and/or DL NAC & REPLAY timeout errors. + */ + if (hba->saved_err & (CONTROLLER_FATAL_ERROR | SYSTEM_BUS_FATAL_ERROR)) + goto out; + + if ((hba->saved_err & DEVICE_FATAL_ERROR) || + ((hba->saved_err & UIC_ERROR) && + (hba->saved_uic_err & UFSHCD_UIC_DL_TCx_REPLAY_ERROR))) + goto out; + + if ((hba->saved_err & UIC_ERROR) && + (hba->saved_uic_err & UFSHCD_UIC_DL_NAC_RECEIVED_ERROR)) { + int err; + /* + * wait for 50ms to see if we can get any other errors or not. + */ + spin_unlock_irqrestore(hba->host->host_lock, flags); + msleep(50); + spin_lock_irqsave(hba->host->host_lock, flags); + + /* + * now check if we have got any other severe errors other than + * DL NAC error? + */ + if ((hba->saved_err & INT_FATAL_ERRORS) || + ((hba->saved_err & UIC_ERROR) && + (hba->saved_uic_err & ~UFSHCD_UIC_DL_NAC_RECEIVED_ERROR))) + goto out; + + /* + * As DL NAC is the only error received so far, send out NOP + * command to confirm if link is still active or not. + * - If we don't get any response then do error recovery. + * - If we get response then clear the DL NAC error bit. + */ + + spin_unlock_irqrestore(hba->host->host_lock, flags); + err = ufshcd_verify_dev_init(hba); + spin_lock_irqsave(hba->host->host_lock, flags); + + if (err) + goto out; + + /* Link seems to be alive hence ignore the DL NAC errors */ + if (hba->saved_uic_err == UFSHCD_UIC_DL_NAC_RECEIVED_ERROR) + hba->saved_err &= ~UIC_ERROR; + /* clear NAC error */ + hba->saved_uic_err &= ~UFSHCD_UIC_DL_NAC_RECEIVED_ERROR; + if (!hba->saved_uic_err) + err_handling = false; + } +out: + spin_unlock_irqrestore(hba->host->host_lock, flags); + return err_handling; +} + +/* host lock must be held before calling this func */ +static inline bool ufshcd_is_saved_err_fatal(struct ufs_hba *hba) +{ + return (hba->saved_uic_err & UFSHCD_UIC_DL_PA_INIT_ERROR) || + (hba->saved_err & (INT_FATAL_ERRORS | UFSHCD_UIC_HIBERN8_MASK)); +} + +void ufshcd_schedule_eh_work(struct ufs_hba *hba) +{ + lockdep_assert_held(hba->host->host_lock); + + /* handle fatal errors only when link is not in error state */ + if (hba->ufshcd_state != UFSHCD_STATE_ERROR) { + if (hba->force_reset || ufshcd_is_link_broken(hba) || + ufshcd_is_saved_err_fatal(hba)) + hba->ufshcd_state = UFSHCD_STATE_EH_SCHEDULED_FATAL; + else + hba->ufshcd_state = UFSHCD_STATE_EH_SCHEDULED_NON_FATAL; + queue_work(hba->eh_wq, &hba->eh_work); + } +} + +static void ufshcd_force_error_recovery(struct ufs_hba *hba) +{ + spin_lock_irq(hba->host->host_lock); + hba->force_reset = true; + ufshcd_schedule_eh_work(hba); + spin_unlock_irq(hba->host->host_lock); +} + +static void ufshcd_clk_scaling_allow(struct ufs_hba *hba, bool allow) +{ + mutex_lock(&hba->wb_mutex); + down_write(&hba->clk_scaling_lock); + hba->clk_scaling.is_allowed = allow; + up_write(&hba->clk_scaling_lock); + mutex_unlock(&hba->wb_mutex); +} + +static void ufshcd_clk_scaling_suspend(struct ufs_hba *hba, bool suspend) +{ + if (suspend) { + if (hba->clk_scaling.is_enabled) + ufshcd_suspend_clkscaling(hba); + ufshcd_clk_scaling_allow(hba, false); + } else { + ufshcd_clk_scaling_allow(hba, true); + if (hba->clk_scaling.is_enabled) + ufshcd_resume_clkscaling(hba); + } +} + +static void ufshcd_err_handling_prepare(struct ufs_hba *hba) +{ + ufshcd_rpm_get_sync(hba); + if (pm_runtime_status_suspended(&hba->ufs_device_wlun->sdev_gendev) || + hba->is_sys_suspended) { + enum ufs_pm_op pm_op; + + /* + * Don't assume anything of resume, if + * resume fails, irq and clocks can be OFF, and powers + * can be OFF or in LPM. + */ + ufshcd_setup_hba_vreg(hba, true); + ufshcd_enable_irq(hba); + ufshcd_setup_vreg(hba, true); + ufshcd_config_vreg_hpm(hba, hba->vreg_info.vccq); + ufshcd_config_vreg_hpm(hba, hba->vreg_info.vccq2); + ufshcd_hold(hba, false); + if (!ufshcd_is_clkgating_allowed(hba)) + ufshcd_setup_clocks(hba, true); + ufshcd_release(hba); + pm_op = hba->is_sys_suspended ? UFS_SYSTEM_PM : UFS_RUNTIME_PM; + ufshcd_vops_resume(hba, pm_op); + } else { + ufshcd_hold(hba, false); + if (ufshcd_is_clkscaling_supported(hba) && + hba->clk_scaling.is_enabled) + ufshcd_suspend_clkscaling(hba); + ufshcd_clk_scaling_allow(hba, false); + } + ufshcd_scsi_block_requests(hba); + /* Drain ufshcd_queuecommand() */ + synchronize_rcu(); + cancel_work_sync(&hba->eeh_work); +} + +static void ufshcd_err_handling_unprepare(struct ufs_hba *hba) +{ + ufshcd_scsi_unblock_requests(hba); + ufshcd_release(hba); + if (ufshcd_is_clkscaling_supported(hba)) + ufshcd_clk_scaling_suspend(hba, false); + ufshcd_rpm_put(hba); +} + +static inline bool ufshcd_err_handling_should_stop(struct ufs_hba *hba) +{ + return (!hba->is_powered || hba->shutting_down || + !hba->ufs_device_wlun || + hba->ufshcd_state == UFSHCD_STATE_ERROR || + (!(hba->saved_err || hba->saved_uic_err || hba->force_reset || + ufshcd_is_link_broken(hba)))); +} + +#ifdef CONFIG_PM +static void ufshcd_recover_pm_error(struct ufs_hba *hba) +{ + struct Scsi_Host *shost = hba->host; + struct scsi_device *sdev; + struct request_queue *q; + int ret; + + hba->is_sys_suspended = false; + /* + * Set RPM status of wlun device to RPM_ACTIVE, + * this also clears its runtime error. + */ + ret = pm_runtime_set_active(&hba->ufs_device_wlun->sdev_gendev); + + /* hba device might have a runtime error otherwise */ + if (ret) + ret = pm_runtime_set_active(hba->dev); + /* + * If wlun device had runtime error, we also need to resume those + * consumer scsi devices in case any of them has failed to be + * resumed due to supplier runtime resume failure. This is to unblock + * blk_queue_enter in case there are bios waiting inside it. + */ + if (!ret) { + shost_for_each_device(sdev, shost) { + q = sdev->request_queue; + if (q->dev && (q->rpm_status == RPM_SUSPENDED || + q->rpm_status == RPM_SUSPENDING)) + pm_request_resume(q->dev); + } + } +} +#else +static inline void ufshcd_recover_pm_error(struct ufs_hba *hba) +{ +} +#endif + +static bool ufshcd_is_pwr_mode_restore_needed(struct ufs_hba *hba) +{ + struct ufs_pa_layer_attr *pwr_info = &hba->pwr_info; + u32 mode; + + ufshcd_dme_get(hba, UIC_ARG_MIB(PA_PWRMODE), &mode); + + if (pwr_info->pwr_rx != ((mode >> PWRMODE_RX_OFFSET) & PWRMODE_MASK)) + return true; + + if (pwr_info->pwr_tx != (mode & PWRMODE_MASK)) + return true; + + return false; +} + +/** + * ufshcd_err_handler - handle UFS errors that require s/w attention + * @work: pointer to work structure + */ +static void ufshcd_err_handler(struct work_struct *work) +{ + int retries = MAX_ERR_HANDLER_RETRIES; + struct ufs_hba *hba; + unsigned long flags; + bool needs_restore; + bool needs_reset; + bool err_xfer; + bool err_tm; + int pmc_err; + int tag; + + hba = container_of(work, struct ufs_hba, eh_work); + + dev_info(hba->dev, + "%s started; HBA state %s; powered %d; shutting down %d; saved_err = %d; saved_uic_err = %d; force_reset = %d%s\n", + __func__, ufshcd_state_name[hba->ufshcd_state], + hba->is_powered, hba->shutting_down, hba->saved_err, + hba->saved_uic_err, hba->force_reset, + ufshcd_is_link_broken(hba) ? "; link is broken" : ""); + + down(&hba->host_sem); + spin_lock_irqsave(hba->host->host_lock, flags); + if (ufshcd_err_handling_should_stop(hba)) { + if (hba->ufshcd_state != UFSHCD_STATE_ERROR) + hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL; + spin_unlock_irqrestore(hba->host->host_lock, flags); + up(&hba->host_sem); + return; + } + ufshcd_set_eh_in_progress(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + ufshcd_err_handling_prepare(hba); + /* Complete requests that have door-bell cleared by h/w */ + ufshcd_complete_requests(hba); + spin_lock_irqsave(hba->host->host_lock, flags); +again: + needs_restore = false; + needs_reset = false; + err_xfer = false; + err_tm = false; + + if (hba->ufshcd_state != UFSHCD_STATE_ERROR) + hba->ufshcd_state = UFSHCD_STATE_RESET; + /* + * A full reset and restore might have happened after preparation + * is finished, double check whether we should stop. + */ + if (ufshcd_err_handling_should_stop(hba)) + goto skip_err_handling; + + if (hba->dev_quirks & UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS) { + bool ret; + + spin_unlock_irqrestore(hba->host->host_lock, flags); + /* release the lock as ufshcd_quirk_dl_nac_errors() may sleep */ + ret = ufshcd_quirk_dl_nac_errors(hba); + spin_lock_irqsave(hba->host->host_lock, flags); + if (!ret && ufshcd_err_handling_should_stop(hba)) + goto skip_err_handling; + } + + if ((hba->saved_err & (INT_FATAL_ERRORS | UFSHCD_UIC_HIBERN8_MASK)) || + (hba->saved_uic_err && + (hba->saved_uic_err != UFSHCD_UIC_PA_GENERIC_ERROR))) { + bool pr_prdt = !!(hba->saved_err & SYSTEM_BUS_FATAL_ERROR); + + spin_unlock_irqrestore(hba->host->host_lock, flags); + ufshcd_print_host_state(hba); + ufshcd_print_pwr_info(hba); + ufshcd_print_evt_hist(hba); + ufshcd_print_tmrs(hba, hba->outstanding_tasks); + ufshcd_print_trs(hba, hba->outstanding_reqs, pr_prdt); + spin_lock_irqsave(hba->host->host_lock, flags); + } + + /* + * if host reset is required then skip clearing the pending + * transfers forcefully because they will get cleared during + * host reset and restore + */ + if (hba->force_reset || ufshcd_is_link_broken(hba) || + ufshcd_is_saved_err_fatal(hba) || + ((hba->saved_err & UIC_ERROR) && + (hba->saved_uic_err & (UFSHCD_UIC_DL_NAC_RECEIVED_ERROR | + UFSHCD_UIC_DL_TCx_REPLAY_ERROR)))) { + needs_reset = true; + goto do_reset; + } + + /* + * If LINERESET was caught, UFS might have been put to PWM mode, + * check if power mode restore is needed. + */ + if (hba->saved_uic_err & UFSHCD_UIC_PA_GENERIC_ERROR) { + hba->saved_uic_err &= ~UFSHCD_UIC_PA_GENERIC_ERROR; + if (!hba->saved_uic_err) + hba->saved_err &= ~UIC_ERROR; + spin_unlock_irqrestore(hba->host->host_lock, flags); + if (ufshcd_is_pwr_mode_restore_needed(hba)) + needs_restore = true; + spin_lock_irqsave(hba->host->host_lock, flags); + if (!hba->saved_err && !needs_restore) + goto skip_err_handling; + } + + hba->silence_err_logs = true; + /* release lock as clear command might sleep */ + spin_unlock_irqrestore(hba->host->host_lock, flags); + /* Clear pending transfer requests */ + for_each_set_bit(tag, &hba->outstanding_reqs, hba->nutrs) { + if (ufshcd_try_to_abort_task(hba, tag)) { + err_xfer = true; + goto lock_skip_pending_xfer_clear; + } + dev_err(hba->dev, "Aborted tag %d / CDB %#02x\n", tag, + hba->lrb[tag].cmd ? hba->lrb[tag].cmd->cmnd[0] : -1); + } + + /* Clear pending task management requests */ + for_each_set_bit(tag, &hba->outstanding_tasks, hba->nutmrs) { + if (ufshcd_clear_tm_cmd(hba, tag)) { + err_tm = true; + goto lock_skip_pending_xfer_clear; + } + } + +lock_skip_pending_xfer_clear: + /* Complete the requests that are cleared by s/w */ + ufshcd_complete_requests(hba); + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->silence_err_logs = false; + if (err_xfer || err_tm) { + needs_reset = true; + goto do_reset; + } + + /* + * After all reqs and tasks are cleared from doorbell, + * now it is safe to retore power mode. + */ + if (needs_restore) { + spin_unlock_irqrestore(hba->host->host_lock, flags); + /* + * Hold the scaling lock just in case dev cmds + * are sent via bsg and/or sysfs. + */ + down_write(&hba->clk_scaling_lock); + hba->force_pmc = true; + pmc_err = ufshcd_config_pwr_mode(hba, &(hba->pwr_info)); + if (pmc_err) { + needs_reset = true; + dev_err(hba->dev, "%s: Failed to restore power mode, err = %d\n", + __func__, pmc_err); + } + hba->force_pmc = false; + ufshcd_print_pwr_info(hba); + up_write(&hba->clk_scaling_lock); + spin_lock_irqsave(hba->host->host_lock, flags); + } + +do_reset: + /* Fatal errors need reset */ + if (needs_reset) { + int err; + + hba->force_reset = false; + spin_unlock_irqrestore(hba->host->host_lock, flags); + err = ufshcd_reset_and_restore(hba); + if (err) + dev_err(hba->dev, "%s: reset and restore failed with err %d\n", + __func__, err); + else + ufshcd_recover_pm_error(hba); + spin_lock_irqsave(hba->host->host_lock, flags); + } + +skip_err_handling: + if (!needs_reset) { + if (hba->ufshcd_state == UFSHCD_STATE_RESET) + hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL; + if (hba->saved_err || hba->saved_uic_err) + dev_err_ratelimited(hba->dev, "%s: exit: saved_err 0x%x saved_uic_err 0x%x", + __func__, hba->saved_err, hba->saved_uic_err); + } + /* Exit in an operational state or dead */ + if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL && + hba->ufshcd_state != UFSHCD_STATE_ERROR) { + if (--retries) + goto again; + hba->ufshcd_state = UFSHCD_STATE_ERROR; + } + ufshcd_clear_eh_in_progress(hba); + spin_unlock_irqrestore(hba->host->host_lock, flags); + ufshcd_err_handling_unprepare(hba); + up(&hba->host_sem); + + dev_info(hba->dev, "%s finished; HBA state %s\n", __func__, + ufshcd_state_name[hba->ufshcd_state]); +} + +/** + * ufshcd_update_uic_error - check and set fatal UIC error flags. + * @hba: per-adapter instance + * + * Returns + * IRQ_HANDLED - If interrupt is valid + * IRQ_NONE - If invalid interrupt + */ +static irqreturn_t ufshcd_update_uic_error(struct ufs_hba *hba) +{ + u32 reg; + irqreturn_t retval = IRQ_NONE; + + /* PHY layer error */ + reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER); + if ((reg & UIC_PHY_ADAPTER_LAYER_ERROR) && + (reg & UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK)) { + ufshcd_update_evt_hist(hba, UFS_EVT_PA_ERR, reg); + /* + * To know whether this error is fatal or not, DB timeout + * must be checked but this error is handled separately. + */ + if (reg & UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK) + dev_dbg(hba->dev, "%s: UIC Lane error reported\n", + __func__); + + /* Got a LINERESET indication. */ + if (reg & UIC_PHY_ADAPTER_LAYER_GENERIC_ERROR) { + struct uic_command *cmd = NULL; + + hba->uic_error |= UFSHCD_UIC_PA_GENERIC_ERROR; + if (hba->uic_async_done && hba->active_uic_cmd) + cmd = hba->active_uic_cmd; + /* + * Ignore the LINERESET during power mode change + * operation via DME_SET command. + */ + if (cmd && (cmd->command == UIC_CMD_DME_SET)) + hba->uic_error &= ~UFSHCD_UIC_PA_GENERIC_ERROR; + } + retval |= IRQ_HANDLED; + } + + /* PA_INIT_ERROR is fatal and needs UIC reset */ + reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_DATA_LINK_LAYER); + if ((reg & UIC_DATA_LINK_LAYER_ERROR) && + (reg & UIC_DATA_LINK_LAYER_ERROR_CODE_MASK)) { + ufshcd_update_evt_hist(hba, UFS_EVT_DL_ERR, reg); + + if (reg & UIC_DATA_LINK_LAYER_ERROR_PA_INIT) + hba->uic_error |= UFSHCD_UIC_DL_PA_INIT_ERROR; + else if (hba->dev_quirks & + UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS) { + if (reg & UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED) + hba->uic_error |= + UFSHCD_UIC_DL_NAC_RECEIVED_ERROR; + else if (reg & UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT) + hba->uic_error |= UFSHCD_UIC_DL_TCx_REPLAY_ERROR; + } + retval |= IRQ_HANDLED; + } + + /* UIC NL/TL/DME errors needs software retry */ + reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_NETWORK_LAYER); + if ((reg & UIC_NETWORK_LAYER_ERROR) && + (reg & UIC_NETWORK_LAYER_ERROR_CODE_MASK)) { + ufshcd_update_evt_hist(hba, UFS_EVT_NL_ERR, reg); + hba->uic_error |= UFSHCD_UIC_NL_ERROR; + retval |= IRQ_HANDLED; + } + + reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_TRANSPORT_LAYER); + if ((reg & UIC_TRANSPORT_LAYER_ERROR) && + (reg & UIC_TRANSPORT_LAYER_ERROR_CODE_MASK)) { + ufshcd_update_evt_hist(hba, UFS_EVT_TL_ERR, reg); + hba->uic_error |= UFSHCD_UIC_TL_ERROR; + retval |= IRQ_HANDLED; + } + + reg = ufshcd_readl(hba, REG_UIC_ERROR_CODE_DME); + if ((reg & UIC_DME_ERROR) && + (reg & UIC_DME_ERROR_CODE_MASK)) { + ufshcd_update_evt_hist(hba, UFS_EVT_DME_ERR, reg); + hba->uic_error |= UFSHCD_UIC_DME_ERROR; + retval |= IRQ_HANDLED; + } + + dev_dbg(hba->dev, "%s: UIC error flags = 0x%08x\n", + __func__, hba->uic_error); + return retval; +} + +/** + * ufshcd_check_errors - Check for errors that need s/w attention + * @hba: per-adapter instance + * @intr_status: interrupt status generated by the controller + * + * Returns + * IRQ_HANDLED - If interrupt is valid + * IRQ_NONE - If invalid interrupt + */ +static irqreturn_t ufshcd_check_errors(struct ufs_hba *hba, u32 intr_status) +{ + bool queue_eh_work = false; + irqreturn_t retval = IRQ_NONE; + + spin_lock(hba->host->host_lock); + hba->errors |= UFSHCD_ERROR_MASK & intr_status; + + if (hba->errors & INT_FATAL_ERRORS) { + ufshcd_update_evt_hist(hba, UFS_EVT_FATAL_ERR, + hba->errors); + queue_eh_work = true; + } + + if (hba->errors & UIC_ERROR) { + hba->uic_error = 0; + retval = ufshcd_update_uic_error(hba); + if (hba->uic_error) + queue_eh_work = true; + } + + if (hba->errors & UFSHCD_UIC_HIBERN8_MASK) { + dev_err(hba->dev, + "%s: Auto Hibern8 %s failed - status: 0x%08x, upmcrs: 0x%08x\n", + __func__, (hba->errors & UIC_HIBERNATE_ENTER) ? + "Enter" : "Exit", + hba->errors, ufshcd_get_upmcrs(hba)); + ufshcd_update_evt_hist(hba, UFS_EVT_AUTO_HIBERN8_ERR, + hba->errors); + ufshcd_set_link_broken(hba); + queue_eh_work = true; + } + + if (queue_eh_work) { + /* + * update the transfer error masks to sticky bits, let's do this + * irrespective of current ufshcd_state. + */ + hba->saved_err |= hba->errors; + hba->saved_uic_err |= hba->uic_error; + + /* dump controller state before resetting */ + if ((hba->saved_err & + (INT_FATAL_ERRORS | UFSHCD_UIC_HIBERN8_MASK)) || + (hba->saved_uic_err && + (hba->saved_uic_err != UFSHCD_UIC_PA_GENERIC_ERROR))) { + dev_err(hba->dev, "%s: saved_err 0x%x saved_uic_err 0x%x\n", + __func__, hba->saved_err, + hba->saved_uic_err); + ufshcd_dump_regs(hba, 0, UFSHCI_REG_SPACE_SIZE, + "host_regs: "); + ufshcd_print_pwr_info(hba); + } + ufshcd_schedule_eh_work(hba); + retval |= IRQ_HANDLED; + } + /* + * if (!queue_eh_work) - + * Other errors are either non-fatal where host recovers + * itself without s/w intervention or errors that will be + * handled by the SCSI core layer. + */ + hba->errors = 0; + hba->uic_error = 0; + spin_unlock(hba->host->host_lock); + return retval; +} + +/** + * ufshcd_tmc_handler - handle task management function completion + * @hba: per adapter instance + * + * Returns + * IRQ_HANDLED - If interrupt is valid + * IRQ_NONE - If invalid interrupt + */ +static irqreturn_t ufshcd_tmc_handler(struct ufs_hba *hba) +{ + unsigned long flags, pending, issued; + irqreturn_t ret = IRQ_NONE; + int tag; + + spin_lock_irqsave(hba->host->host_lock, flags); + pending = ufshcd_readl(hba, REG_UTP_TASK_REQ_DOOR_BELL); + issued = hba->outstanding_tasks & ~pending; + for_each_set_bit(tag, &issued, hba->nutmrs) { + struct request *req = hba->tmf_rqs[tag]; + struct completion *c = req->end_io_data; + + complete(c); + ret = IRQ_HANDLED; + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + + return ret; +} + +/** + * ufshcd_sl_intr - Interrupt service routine + * @hba: per adapter instance + * @intr_status: contains interrupts generated by the controller + * + * Returns + * IRQ_HANDLED - If interrupt is valid + * IRQ_NONE - If invalid interrupt + */ +static irqreturn_t ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status) +{ + irqreturn_t retval = IRQ_NONE; + + if (intr_status & UFSHCD_UIC_MASK) + retval |= ufshcd_uic_cmd_compl(hba, intr_status); + + if (intr_status & UFSHCD_ERROR_MASK || hba->errors) + retval |= ufshcd_check_errors(hba, intr_status); + + if (intr_status & UTP_TASK_REQ_COMPL) + retval |= ufshcd_tmc_handler(hba); + + if (intr_status & UTP_TRANSFER_REQ_COMPL) + retval |= ufshcd_transfer_req_compl(hba); + + return retval; +} + +/** + * ufshcd_intr - Main interrupt service routine + * @irq: irq number + * @__hba: pointer to adapter instance + * + * Returns + * IRQ_HANDLED - If interrupt is valid + * IRQ_NONE - If invalid interrupt + */ +static irqreturn_t ufshcd_intr(int irq, void *__hba) +{ + u32 intr_status, enabled_intr_status = 0; + irqreturn_t retval = IRQ_NONE; + struct ufs_hba *hba = __hba; + int retries = hba->nutrs; + + intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); + hba->ufs_stats.last_intr_status = intr_status; + hba->ufs_stats.last_intr_ts = local_clock(); + + /* + * There could be max of hba->nutrs reqs in flight and in worst case + * if the reqs get finished 1 by 1 after the interrupt status is + * read, make sure we handle them by checking the interrupt status + * again in a loop until we process all of the reqs before returning. + */ + while (intr_status && retries--) { + enabled_intr_status = + intr_status & ufshcd_readl(hba, REG_INTERRUPT_ENABLE); + ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS); + if (enabled_intr_status) + retval |= ufshcd_sl_intr(hba, enabled_intr_status); + + intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); + } + + if (enabled_intr_status && retval == IRQ_NONE && + (!(enabled_intr_status & UTP_TRANSFER_REQ_COMPL) || + hba->outstanding_reqs) && !ufshcd_eh_in_progress(hba)) { + dev_err(hba->dev, "%s: Unhandled interrupt 0x%08x (0x%08x, 0x%08x)\n", + __func__, + intr_status, + hba->ufs_stats.last_intr_status, + enabled_intr_status); + ufshcd_dump_regs(hba, 0, UFSHCI_REG_SPACE_SIZE, "host_regs: "); + } + + return retval; +} + +static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag) +{ + int err = 0; + u32 mask = 1 << tag; + unsigned long flags; + + if (!test_bit(tag, &hba->outstanding_tasks)) + goto out; + + spin_lock_irqsave(hba->host->host_lock, flags); + ufshcd_utmrl_clear(hba, tag); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + /* poll for max. 1 sec to clear door bell register by h/w */ + err = ufshcd_wait_for_register(hba, + REG_UTP_TASK_REQ_DOOR_BELL, + mask, 0, 1000, 1000); + + dev_err(hba->dev, "Clearing task management function with tag %d %s\n", + tag, err < 0 ? "failed" : "succeeded"); + +out: + return err; +} + +static int __ufshcd_issue_tm_cmd(struct ufs_hba *hba, + struct utp_task_req_desc *treq, u8 tm_function) +{ + struct request_queue *q = hba->tmf_queue; + struct Scsi_Host *host = hba->host; + DECLARE_COMPLETION_ONSTACK(wait); + struct request *req; + unsigned long flags; + int task_tag, err; + + /* + * blk_mq_alloc_request() is used here only to get a free tag. + */ + req = blk_mq_alloc_request(q, REQ_OP_DRV_OUT, 0); + if (IS_ERR(req)) + return PTR_ERR(req); + + req->end_io_data = &wait; + ufshcd_hold(hba, false); + + spin_lock_irqsave(host->host_lock, flags); + + task_tag = req->tag; + WARN_ONCE(task_tag < 0 || task_tag >= hba->nutmrs, "Invalid tag %d\n", + task_tag); + hba->tmf_rqs[req->tag] = req; + treq->upiu_req.req_header.dword_0 |= cpu_to_be32(task_tag); + + memcpy(hba->utmrdl_base_addr + task_tag, treq, sizeof(*treq)); + ufshcd_vops_setup_task_mgmt(hba, task_tag, tm_function); + + /* send command to the controller */ + __set_bit(task_tag, &hba->outstanding_tasks); + + ufshcd_writel(hba, 1 << task_tag, REG_UTP_TASK_REQ_DOOR_BELL); + /* Make sure that doorbell is committed immediately */ + wmb(); + + spin_unlock_irqrestore(host->host_lock, flags); + + ufshcd_add_tm_upiu_trace(hba, task_tag, UFS_TM_SEND); + + /* wait until the task management command is completed */ + err = wait_for_completion_io_timeout(&wait, + msecs_to_jiffies(TM_CMD_TIMEOUT)); + if (!err) { + ufshcd_add_tm_upiu_trace(hba, task_tag, UFS_TM_ERR); + dev_err(hba->dev, "%s: task management cmd 0x%.2x timed-out\n", + __func__, tm_function); + if (ufshcd_clear_tm_cmd(hba, task_tag)) + dev_WARN(hba->dev, "%s: unable to clear tm cmd (slot %d) after timeout\n", + __func__, task_tag); + err = -ETIMEDOUT; + } else { + err = 0; + memcpy(treq, hba->utmrdl_base_addr + task_tag, sizeof(*treq)); + + ufshcd_add_tm_upiu_trace(hba, task_tag, UFS_TM_COMP); + } + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->tmf_rqs[req->tag] = NULL; + __clear_bit(task_tag, &hba->outstanding_tasks); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + ufshcd_release(hba); + blk_mq_free_request(req); + + return err; +} + +/** + * ufshcd_issue_tm_cmd - issues task management commands to controller + * @hba: per adapter instance + * @lun_id: LUN ID to which TM command is sent + * @task_id: task ID to which the TM command is applicable + * @tm_function: task management function opcode + * @tm_response: task management service response return value + * + * Returns non-zero value on error, zero on success. + */ +static int ufshcd_issue_tm_cmd(struct ufs_hba *hba, int lun_id, int task_id, + u8 tm_function, u8 *tm_response) +{ + struct utp_task_req_desc treq = { { 0 }, }; + enum utp_ocs ocs_value; + int err; + + /* Configure task request descriptor */ + treq.header.dword_0 = cpu_to_le32(UTP_REQ_DESC_INT_CMD); + treq.header.dword_2 = cpu_to_le32(OCS_INVALID_COMMAND_STATUS); + + /* Configure task request UPIU */ + treq.upiu_req.req_header.dword_0 = cpu_to_be32(lun_id << 8) | + cpu_to_be32(UPIU_TRANSACTION_TASK_REQ << 24); + treq.upiu_req.req_header.dword_1 = cpu_to_be32(tm_function << 16); + + /* + * The host shall provide the same value for LUN field in the basic + * header and for Input Parameter. + */ + treq.upiu_req.input_param1 = cpu_to_be32(lun_id); + treq.upiu_req.input_param2 = cpu_to_be32(task_id); + + err = __ufshcd_issue_tm_cmd(hba, &treq, tm_function); + if (err == -ETIMEDOUT) + return err; + + ocs_value = le32_to_cpu(treq.header.dword_2) & MASK_OCS; + if (ocs_value != OCS_SUCCESS) + dev_err(hba->dev, "%s: failed, ocs = 0x%x\n", + __func__, ocs_value); + else if (tm_response) + *tm_response = be32_to_cpu(treq.upiu_rsp.output_param1) & + MASK_TM_SERVICE_RESP; + return err; +} + +/** + * ufshcd_issue_devman_upiu_cmd - API for sending "utrd" type requests + * @hba: per-adapter instance + * @req_upiu: upiu request + * @rsp_upiu: upiu reply + * @desc_buff: pointer to descriptor buffer, NULL if NA + * @buff_len: descriptor size, 0 if NA + * @cmd_type: specifies the type (NOP, Query...) + * @desc_op: descriptor operation + * + * Those type of requests uses UTP Transfer Request Descriptor - utrd. + * Therefore, it "rides" the device management infrastructure: uses its tag and + * tasks work queues. + * + * Since there is only one available tag for device management commands, + * the caller is expected to hold the hba->dev_cmd.lock mutex. + */ +static int ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba, + struct utp_upiu_req *req_upiu, + struct utp_upiu_req *rsp_upiu, + u8 *desc_buff, int *buff_len, + enum dev_cmd_type cmd_type, + enum query_opcode desc_op) +{ + DECLARE_COMPLETION_ONSTACK(wait); + const u32 tag = hba->reserved_slot; + struct ufshcd_lrb *lrbp; + int err = 0; + u8 upiu_flags; + + /* Protects use of hba->reserved_slot. */ + lockdep_assert_held(&hba->dev_cmd.lock); + + down_read(&hba->clk_scaling_lock); + + lrbp = &hba->lrb[tag]; + WARN_ON(lrbp->cmd); + lrbp->cmd = NULL; + lrbp->task_tag = tag; + lrbp->lun = 0; + lrbp->intr_cmd = true; + ufshcd_prepare_lrbp_crypto(NULL, lrbp); + hba->dev_cmd.type = cmd_type; + + if (hba->ufs_version <= ufshci_version(1, 1)) + lrbp->command_type = UTP_CMD_TYPE_DEV_MANAGE; + else + lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE; + + /* update the task tag in the request upiu */ + req_upiu->header.dword_0 |= cpu_to_be32(tag); + + ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE); + + /* just copy the upiu request as it is */ + memcpy(lrbp->ucd_req_ptr, req_upiu, sizeof(*lrbp->ucd_req_ptr)); + if (desc_buff && desc_op == UPIU_QUERY_OPCODE_WRITE_DESC) { + /* The Data Segment Area is optional depending upon the query + * function value. for WRITE DESCRIPTOR, the data segment + * follows right after the tsf. + */ + memcpy(lrbp->ucd_req_ptr + 1, desc_buff, *buff_len); + *buff_len = 0; + } + + memset(lrbp->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp)); + + hba->dev_cmd.complete = &wait; + + ufshcd_add_query_upiu_trace(hba, UFS_QUERY_SEND, lrbp->ucd_req_ptr); + + ufshcd_send_command(hba, tag); + /* + * ignore the returning value here - ufshcd_check_query_response is + * bound to fail since dev_cmd.query and dev_cmd.type were left empty. + * read the response directly ignoring all errors. + */ + ufshcd_wait_for_dev_cmd(hba, lrbp, QUERY_REQ_TIMEOUT); + + /* just copy the upiu response as it is */ + memcpy(rsp_upiu, lrbp->ucd_rsp_ptr, sizeof(*rsp_upiu)); + if (desc_buff && desc_op == UPIU_QUERY_OPCODE_READ_DESC) { + u8 *descp = (u8 *)lrbp->ucd_rsp_ptr + sizeof(*rsp_upiu); + u16 resp_len = be32_to_cpu(lrbp->ucd_rsp_ptr->header.dword_2) & + MASK_QUERY_DATA_SEG_LEN; + + if (*buff_len >= resp_len) { + memcpy(desc_buff, descp, resp_len); + *buff_len = resp_len; + } else { + dev_warn(hba->dev, + "%s: rsp size %d is bigger than buffer size %d", + __func__, resp_len, *buff_len); + *buff_len = 0; + err = -EINVAL; + } + } + ufshcd_add_query_upiu_trace(hba, err ? UFS_QUERY_ERR : UFS_QUERY_COMP, + (struct utp_upiu_req *)lrbp->ucd_rsp_ptr); + + up_read(&hba->clk_scaling_lock); + return err; +} + +/** + * ufshcd_exec_raw_upiu_cmd - API function for sending raw upiu commands + * @hba: per-adapter instance + * @req_upiu: upiu request + * @rsp_upiu: upiu reply - only 8 DW as we do not support scsi commands + * @msgcode: message code, one of UPIU Transaction Codes Initiator to Target + * @desc_buff: pointer to descriptor buffer, NULL if NA + * @buff_len: descriptor size, 0 if NA + * @desc_op: descriptor operation + * + * Supports UTP Transfer requests (nop and query), and UTP Task + * Management requests. + * It is up to the caller to fill the upiu conent properly, as it will + * be copied without any further input validations. + */ +int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba, + struct utp_upiu_req *req_upiu, + struct utp_upiu_req *rsp_upiu, + int msgcode, + u8 *desc_buff, int *buff_len, + enum query_opcode desc_op) +{ + int err; + enum dev_cmd_type cmd_type = DEV_CMD_TYPE_QUERY; + struct utp_task_req_desc treq = { { 0 }, }; + enum utp_ocs ocs_value; + u8 tm_f = be32_to_cpu(req_upiu->header.dword_1) >> 16 & MASK_TM_FUNC; + + switch (msgcode) { + case UPIU_TRANSACTION_NOP_OUT: + cmd_type = DEV_CMD_TYPE_NOP; + fallthrough; + case UPIU_TRANSACTION_QUERY_REQ: + ufshcd_hold(hba, false); + mutex_lock(&hba->dev_cmd.lock); + err = ufshcd_issue_devman_upiu_cmd(hba, req_upiu, rsp_upiu, + desc_buff, buff_len, + cmd_type, desc_op); + mutex_unlock(&hba->dev_cmd.lock); + ufshcd_release(hba); + + break; + case UPIU_TRANSACTION_TASK_REQ: + treq.header.dword_0 = cpu_to_le32(UTP_REQ_DESC_INT_CMD); + treq.header.dword_2 = cpu_to_le32(OCS_INVALID_COMMAND_STATUS); + + memcpy(&treq.upiu_req, req_upiu, sizeof(*req_upiu)); + + err = __ufshcd_issue_tm_cmd(hba, &treq, tm_f); + if (err == -ETIMEDOUT) + break; + + ocs_value = le32_to_cpu(treq.header.dword_2) & MASK_OCS; + if (ocs_value != OCS_SUCCESS) { + dev_err(hba->dev, "%s: failed, ocs = 0x%x\n", __func__, + ocs_value); + break; + } + + memcpy(rsp_upiu, &treq.upiu_rsp, sizeof(*rsp_upiu)); + + break; + default: + err = -EINVAL; + + break; + } + + return err; +} + +/** + * ufshcd_eh_device_reset_handler() - Reset a single logical unit. + * @cmd: SCSI command pointer + * + * Returns SUCCESS/FAILED + */ +static int ufshcd_eh_device_reset_handler(struct scsi_cmnd *cmd) +{ + unsigned long flags, pending_reqs = 0, not_cleared = 0; + struct Scsi_Host *host; + struct ufs_hba *hba; + u32 pos; + int err; + u8 resp = 0xF, lun; + + host = cmd->device->host; + hba = shost_priv(host); + + lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun); + err = ufshcd_issue_tm_cmd(hba, lun, 0, UFS_LOGICAL_RESET, &resp); + if (err || resp != UPIU_TASK_MANAGEMENT_FUNC_COMPL) { + if (!err) + err = resp; + goto out; + } + + /* clear the commands that were pending for corresponding LUN */ + spin_lock_irqsave(&hba->outstanding_lock, flags); + for_each_set_bit(pos, &hba->outstanding_reqs, hba->nutrs) + if (hba->lrb[pos].lun == lun) + __set_bit(pos, &pending_reqs); + hba->outstanding_reqs &= ~pending_reqs; + spin_unlock_irqrestore(&hba->outstanding_lock, flags); + + if (ufshcd_clear_cmds(hba, pending_reqs) < 0) { + spin_lock_irqsave(&hba->outstanding_lock, flags); + not_cleared = pending_reqs & + ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); + hba->outstanding_reqs |= not_cleared; + spin_unlock_irqrestore(&hba->outstanding_lock, flags); + + dev_err(hba->dev, "%s: failed to clear requests %#lx\n", + __func__, not_cleared); + } + __ufshcd_transfer_req_compl(hba, pending_reqs & ~not_cleared); + +out: + hba->req_abort_count = 0; + ufshcd_update_evt_hist(hba, UFS_EVT_DEV_RESET, (u32)err); + if (!err) { + err = SUCCESS; + } else { + dev_err(hba->dev, "%s: failed with err %d\n", __func__, err); + err = FAILED; + } + return err; +} + +static void ufshcd_set_req_abort_skip(struct ufs_hba *hba, unsigned long bitmap) +{ + struct ufshcd_lrb *lrbp; + int tag; + + for_each_set_bit(tag, &bitmap, hba->nutrs) { + lrbp = &hba->lrb[tag]; + lrbp->req_abort_skip = true; + } +} + +/** + * ufshcd_try_to_abort_task - abort a specific task + * @hba: Pointer to adapter instance + * @tag: Task tag/index to be aborted + * + * Abort the pending command in device by sending UFS_ABORT_TASK task management + * command, and in host controller by clearing the door-bell register. There can + * be race between controller sending the command to the device while abort is + * issued. To avoid that, first issue UFS_QUERY_TASK to check if the command is + * really issued and then try to abort it. + * + * Returns zero on success, non-zero on failure + */ +static int ufshcd_try_to_abort_task(struct ufs_hba *hba, int tag) +{ + struct ufshcd_lrb *lrbp = &hba->lrb[tag]; + int err = 0; + int poll_cnt; + u8 resp = 0xF; + u32 reg; + + for (poll_cnt = 100; poll_cnt; poll_cnt--) { + err = ufshcd_issue_tm_cmd(hba, lrbp->lun, lrbp->task_tag, + UFS_QUERY_TASK, &resp); + if (!err && resp == UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED) { + /* cmd pending in the device */ + dev_err(hba->dev, "%s: cmd pending in the device. tag = %d\n", + __func__, tag); + break; + } else if (!err && resp == UPIU_TASK_MANAGEMENT_FUNC_COMPL) { + /* + * cmd not pending in the device, check if it is + * in transition. + */ + dev_err(hba->dev, "%s: cmd at tag %d not pending in the device.\n", + __func__, tag); + reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); + if (reg & (1 << tag)) { + /* sleep for max. 200us to stabilize */ + usleep_range(100, 200); + continue; + } + /* command completed already */ + dev_err(hba->dev, "%s: cmd at tag %d successfully cleared from DB.\n", + __func__, tag); + goto out; + } else { + dev_err(hba->dev, + "%s: no response from device. tag = %d, err %d\n", + __func__, tag, err); + if (!err) + err = resp; /* service response error */ + goto out; + } + } + + if (!poll_cnt) { + err = -EBUSY; + goto out; + } + + err = ufshcd_issue_tm_cmd(hba, lrbp->lun, lrbp->task_tag, + UFS_ABORT_TASK, &resp); + if (err || resp != UPIU_TASK_MANAGEMENT_FUNC_COMPL) { + if (!err) { + err = resp; /* service response error */ + dev_err(hba->dev, "%s: issued. tag = %d, err %d\n", + __func__, tag, err); + } + goto out; + } + + err = ufshcd_clear_cmds(hba, 1U << tag); + if (err) + dev_err(hba->dev, "%s: Failed clearing cmd at tag %d, err %d\n", + __func__, tag, err); + +out: + return err; +} + +/** + * ufshcd_abort - scsi host template eh_abort_handler callback + * @cmd: SCSI command pointer + * + * Returns SUCCESS/FAILED + */ +static int ufshcd_abort(struct scsi_cmnd *cmd) +{ + struct Scsi_Host *host = cmd->device->host; + struct ufs_hba *hba = shost_priv(host); + int tag = scsi_cmd_to_rq(cmd)->tag; + struct ufshcd_lrb *lrbp = &hba->lrb[tag]; + unsigned long flags; + int err = FAILED; + bool outstanding; + u32 reg; + + WARN_ONCE(tag < 0, "Invalid tag %d\n", tag); + + ufshcd_hold(hba, false); + reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL); + /* If command is already aborted/completed, return FAILED. */ + if (!(test_bit(tag, &hba->outstanding_reqs))) { + dev_err(hba->dev, + "%s: cmd at tag %d already completed, outstanding=0x%lx, doorbell=0x%x\n", + __func__, tag, hba->outstanding_reqs, reg); + goto release; + } + + /* Print Transfer Request of aborted task */ + dev_info(hba->dev, "%s: Device abort task at tag %d\n", __func__, tag); + + /* + * Print detailed info about aborted request. + * As more than one request might get aborted at the same time, + * print full information only for the first aborted request in order + * to reduce repeated printouts. For other aborted requests only print + * basic details. + */ + scsi_print_command(cmd); + if (!hba->req_abort_count) { + ufshcd_update_evt_hist(hba, UFS_EVT_ABORT, tag); + ufshcd_print_evt_hist(hba); + ufshcd_print_host_state(hba); + ufshcd_print_pwr_info(hba); + ufshcd_print_trs(hba, 1 << tag, true); + } else { + ufshcd_print_trs(hba, 1 << tag, false); + } + hba->req_abort_count++; + + if (!(reg & (1 << tag))) { + dev_err(hba->dev, + "%s: cmd was completed, but without a notifying intr, tag = %d", + __func__, tag); + __ufshcd_transfer_req_compl(hba, 1UL << tag); + goto release; + } + + /* + * Task abort to the device W-LUN is illegal. When this command + * will fail, due to spec violation, scsi err handling next step + * will be to send LU reset which, again, is a spec violation. + * To avoid these unnecessary/illegal steps, first we clean up + * the lrb taken by this cmd and re-set it in outstanding_reqs, + * then queue the eh_work and bail. + */ + if (lrbp->lun == UFS_UPIU_UFS_DEVICE_WLUN) { + ufshcd_update_evt_hist(hba, UFS_EVT_ABORT, lrbp->lun); + + spin_lock_irqsave(host->host_lock, flags); + hba->force_reset = true; + ufshcd_schedule_eh_work(hba); + spin_unlock_irqrestore(host->host_lock, flags); + goto release; + } + + /* Skip task abort in case previous aborts failed and report failure */ + if (lrbp->req_abort_skip) { + dev_err(hba->dev, "%s: skipping abort\n", __func__); + ufshcd_set_req_abort_skip(hba, hba->outstanding_reqs); + goto release; + } + + err = ufshcd_try_to_abort_task(hba, tag); + if (err) { + dev_err(hba->dev, "%s: failed with err %d\n", __func__, err); + ufshcd_set_req_abort_skip(hba, hba->outstanding_reqs); + err = FAILED; + goto release; + } + + /* + * Clear the corresponding bit from outstanding_reqs since the command + * has been aborted successfully. + */ + spin_lock_irqsave(&hba->outstanding_lock, flags); + outstanding = __test_and_clear_bit(tag, &hba->outstanding_reqs); + spin_unlock_irqrestore(&hba->outstanding_lock, flags); + + if (outstanding) + ufshcd_release_scsi_cmd(hba, lrbp); + + err = SUCCESS; + +release: + /* Matches the ufshcd_hold() call at the start of this function. */ + ufshcd_release(hba); + return err; +} + +/** + * ufshcd_host_reset_and_restore - reset and restore host controller + * @hba: per-adapter instance + * + * Note that host controller reset may issue DME_RESET to + * local and remote (device) Uni-Pro stack and the attributes + * are reset to default state. + * + * Returns zero on success, non-zero on failure + */ +static int ufshcd_host_reset_and_restore(struct ufs_hba *hba) +{ + int err; + + /* + * Stop the host controller and complete the requests + * cleared by h/w + */ + ufshpb_toggle_state(hba, HPB_PRESENT, HPB_RESET); + ufshcd_hba_stop(hba); + hba->silence_err_logs = true; + ufshcd_complete_requests(hba); + hba->silence_err_logs = false; + + /* scale up clocks to max frequency before full reinitialization */ + ufshcd_scale_clks(hba, true); + + err = ufshcd_hba_enable(hba); + + /* Establish the link again and restore the device */ + if (!err) + err = ufshcd_probe_hba(hba, false); + + if (err) + dev_err(hba->dev, "%s: Host init failed %d\n", __func__, err); + ufshcd_update_evt_hist(hba, UFS_EVT_HOST_RESET, (u32)err); + return err; +} + +/** + * ufshcd_reset_and_restore - reset and re-initialize host/device + * @hba: per-adapter instance + * + * Reset and recover device, host and re-establish link. This + * is helpful to recover the communication in fatal error conditions. + * + * Returns zero on success, non-zero on failure + */ +static int ufshcd_reset_and_restore(struct ufs_hba *hba) +{ + u32 saved_err = 0; + u32 saved_uic_err = 0; + int err = 0; + unsigned long flags; + int retries = MAX_HOST_RESET_RETRIES; + + spin_lock_irqsave(hba->host->host_lock, flags); + do { + /* + * This is a fresh start, cache and clear saved error first, + * in case new error generated during reset and restore. + */ + saved_err |= hba->saved_err; + saved_uic_err |= hba->saved_uic_err; + hba->saved_err = 0; + hba->saved_uic_err = 0; + hba->force_reset = false; + hba->ufshcd_state = UFSHCD_STATE_RESET; + spin_unlock_irqrestore(hba->host->host_lock, flags); + + /* Reset the attached device */ + ufshcd_device_reset(hba); + + err = ufshcd_host_reset_and_restore(hba); + + spin_lock_irqsave(hba->host->host_lock, flags); + if (err) + continue; + /* Do not exit unless operational or dead */ + if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL && + hba->ufshcd_state != UFSHCD_STATE_ERROR && + hba->ufshcd_state != UFSHCD_STATE_EH_SCHEDULED_NON_FATAL) + err = -EAGAIN; + } while (err && --retries); + + /* + * Inform scsi mid-layer that we did reset and allow to handle + * Unit Attention properly. + */ + scsi_report_bus_reset(hba->host, 0); + if (err) { + hba->ufshcd_state = UFSHCD_STATE_ERROR; + hba->saved_err |= saved_err; + hba->saved_uic_err |= saved_uic_err; + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + + return err; +} + +/** + * ufshcd_eh_host_reset_handler - host reset handler registered to scsi layer + * @cmd: SCSI command pointer + * + * Returns SUCCESS/FAILED + */ +static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd) +{ + int err = SUCCESS; + unsigned long flags; + struct ufs_hba *hba; + + hba = shost_priv(cmd->device->host); + + spin_lock_irqsave(hba->host->host_lock, flags); + hba->force_reset = true; + ufshcd_schedule_eh_work(hba); + dev_err(hba->dev, "%s: reset in progress - 1\n", __func__); + spin_unlock_irqrestore(hba->host->host_lock, flags); + + flush_work(&hba->eh_work); + + spin_lock_irqsave(hba->host->host_lock, flags); + if (hba->ufshcd_state == UFSHCD_STATE_ERROR) + err = FAILED; + spin_unlock_irqrestore(hba->host->host_lock, flags); + + return err; +} + +/** + * ufshcd_get_max_icc_level - calculate the ICC level + * @sup_curr_uA: max. current supported by the regulator + * @start_scan: row at the desc table to start scan from + * @buff: power descriptor buffer + * + * Returns calculated max ICC level for specific regulator + */ +static u32 ufshcd_get_max_icc_level(int sup_curr_uA, u32 start_scan, + const char *buff) +{ + int i; + int curr_uA; + u16 data; + u16 unit; + + for (i = start_scan; i >= 0; i--) { + data = get_unaligned_be16(&buff[2 * i]); + unit = (data & ATTR_ICC_LVL_UNIT_MASK) >> + ATTR_ICC_LVL_UNIT_OFFSET; + curr_uA = data & ATTR_ICC_LVL_VALUE_MASK; + switch (unit) { + case UFSHCD_NANO_AMP: + curr_uA = curr_uA / 1000; + break; + case UFSHCD_MILI_AMP: + curr_uA = curr_uA * 1000; + break; + case UFSHCD_AMP: + curr_uA = curr_uA * 1000 * 1000; + break; + case UFSHCD_MICRO_AMP: + default: + break; + } + if (sup_curr_uA >= curr_uA) + break; + } + if (i < 0) { + i = 0; + pr_err("%s: Couldn't find valid icc_level = %d", __func__, i); + } + + return (u32)i; +} + +/** + * ufshcd_find_max_sup_active_icc_level - calculate the max ICC level + * In case regulators are not initialized we'll return 0 + * @hba: per-adapter instance + * @desc_buf: power descriptor buffer to extract ICC levels from. + * @len: length of desc_buff + * + * Returns calculated ICC level + */ +static u32 ufshcd_find_max_sup_active_icc_level(struct ufs_hba *hba, + const u8 *desc_buf, int len) +{ + u32 icc_level = 0; + + if (!hba->vreg_info.vcc || !hba->vreg_info.vccq || + !hba->vreg_info.vccq2) { + /* + * Using dev_dbg to avoid messages during runtime PM to avoid + * never-ending cycles of messages written back to storage by + * user space causing runtime resume, causing more messages and + * so on. + */ + dev_dbg(hba->dev, + "%s: Regulator capability was not set, actvIccLevel=%d", + __func__, icc_level); + goto out; + } + + if (hba->vreg_info.vcc->max_uA) + icc_level = ufshcd_get_max_icc_level( + hba->vreg_info.vcc->max_uA, + POWER_DESC_MAX_ACTV_ICC_LVLS - 1, + &desc_buf[PWR_DESC_ACTIVE_LVLS_VCC_0]); + + if (hba->vreg_info.vccq->max_uA) + icc_level = ufshcd_get_max_icc_level( + hba->vreg_info.vccq->max_uA, + icc_level, + &desc_buf[PWR_DESC_ACTIVE_LVLS_VCCQ_0]); + + if (hba->vreg_info.vccq2->max_uA) + icc_level = ufshcd_get_max_icc_level( + hba->vreg_info.vccq2->max_uA, + icc_level, + &desc_buf[PWR_DESC_ACTIVE_LVLS_VCCQ2_0]); +out: + return icc_level; +} + +static void ufshcd_set_active_icc_lvl(struct ufs_hba *hba) +{ + int ret; + int buff_len = hba->desc_size[QUERY_DESC_IDN_POWER]; + u8 *desc_buf; + u32 icc_level; + + desc_buf = kmalloc(buff_len, GFP_KERNEL); + if (!desc_buf) + return; + + ret = ufshcd_read_desc_param(hba, QUERY_DESC_IDN_POWER, 0, 0, + desc_buf, buff_len); + if (ret) { + dev_err(hba->dev, + "%s: Failed reading power descriptor.len = %d ret = %d", + __func__, buff_len, ret); + goto out; + } + + icc_level = ufshcd_find_max_sup_active_icc_level(hba, desc_buf, + buff_len); + dev_dbg(hba->dev, "%s: setting icc_level 0x%x", __func__, icc_level); + + ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR, + QUERY_ATTR_IDN_ACTIVE_ICC_LVL, 0, 0, &icc_level); + + if (ret) + dev_err(hba->dev, + "%s: Failed configuring bActiveICCLevel = %d ret = %d", + __func__, icc_level, ret); + +out: + kfree(desc_buf); +} + +static inline void ufshcd_blk_pm_runtime_init(struct scsi_device *sdev) +{ + scsi_autopm_get_device(sdev); + blk_pm_runtime_init(sdev->request_queue, &sdev->sdev_gendev); + if (sdev->rpm_autosuspend) + pm_runtime_set_autosuspend_delay(&sdev->sdev_gendev, + RPM_AUTOSUSPEND_DELAY_MS); + scsi_autopm_put_device(sdev); +} + +/** + * ufshcd_scsi_add_wlus - Adds required W-LUs + * @hba: per-adapter instance + * + * UFS device specification requires the UFS devices to support 4 well known + * logical units: + * "REPORT_LUNS" (address: 01h) + * "UFS Device" (address: 50h) + * "RPMB" (address: 44h) + * "BOOT" (address: 30h) + * UFS device's power management needs to be controlled by "POWER CONDITION" + * field of SSU (START STOP UNIT) command. But this "power condition" field + * will take effect only when its sent to "UFS device" well known logical unit + * hence we require the scsi_device instance to represent this logical unit in + * order for the UFS host driver to send the SSU command for power management. + * + * We also require the scsi_device instance for "RPMB" (Replay Protected Memory + * Block) LU so user space process can control this LU. User space may also + * want to have access to BOOT LU. + * + * This function adds scsi device instances for each of all well known LUs + * (except "REPORT LUNS" LU). + * + * Returns zero on success (all required W-LUs are added successfully), + * non-zero error value on failure (if failed to add any of the required W-LU). + */ +static int ufshcd_scsi_add_wlus(struct ufs_hba *hba) +{ + int ret = 0; + struct scsi_device *sdev_boot, *sdev_rpmb; + + hba->ufs_device_wlun = __scsi_add_device(hba->host, 0, 0, + ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_UFS_DEVICE_WLUN), NULL); + if (IS_ERR(hba->ufs_device_wlun)) { + ret = PTR_ERR(hba->ufs_device_wlun); + hba->ufs_device_wlun = NULL; + goto out; + } + scsi_device_put(hba->ufs_device_wlun); + + sdev_rpmb = __scsi_add_device(hba->host, 0, 0, + ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_RPMB_WLUN), NULL); + if (IS_ERR(sdev_rpmb)) { + ret = PTR_ERR(sdev_rpmb); + goto remove_ufs_device_wlun; + } + ufshcd_blk_pm_runtime_init(sdev_rpmb); + scsi_device_put(sdev_rpmb); + + sdev_boot = __scsi_add_device(hba->host, 0, 0, + ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_BOOT_WLUN), NULL); + if (IS_ERR(sdev_boot)) { + dev_err(hba->dev, "%s: BOOT WLUN not found\n", __func__); + } else { + ufshcd_blk_pm_runtime_init(sdev_boot); + scsi_device_put(sdev_boot); + } + goto out; + +remove_ufs_device_wlun: + scsi_remove_device(hba->ufs_device_wlun); +out: + return ret; +} + +static void ufshcd_wb_probe(struct ufs_hba *hba, const u8 *desc_buf) +{ + struct ufs_dev_info *dev_info = &hba->dev_info; + u8 lun; + u32 d_lu_wb_buf_alloc; + u32 ext_ufs_feature; + + if (!ufshcd_is_wb_allowed(hba)) + return; + + /* + * Probe WB only for UFS-2.2 and UFS-3.1 (and later) devices or + * UFS devices with quirk UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES + * enabled + */ + if (!(dev_info->wspecversion >= 0x310 || + dev_info->wspecversion == 0x220 || + (hba->dev_quirks & UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES))) + goto wb_disabled; + + if (hba->desc_size[QUERY_DESC_IDN_DEVICE] < + DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP + 4) + goto wb_disabled; + + ext_ufs_feature = get_unaligned_be32(desc_buf + + DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP); + + if (!(ext_ufs_feature & UFS_DEV_WRITE_BOOSTER_SUP)) + goto wb_disabled; + + /* + * WB may be supported but not configured while provisioning. The spec + * says, in dedicated wb buffer mode, a max of 1 lun would have wb + * buffer configured. + */ + dev_info->wb_buffer_type = desc_buf[DEVICE_DESC_PARAM_WB_TYPE]; + + dev_info->b_presrv_uspc_en = + desc_buf[DEVICE_DESC_PARAM_WB_PRESRV_USRSPC_EN]; + + if (dev_info->wb_buffer_type == WB_BUF_MODE_SHARED) { + if (!get_unaligned_be32(desc_buf + + DEVICE_DESC_PARAM_WB_SHARED_ALLOC_UNITS)) + goto wb_disabled; + } else { + for (lun = 0; lun < UFS_UPIU_MAX_WB_LUN_ID; lun++) { + d_lu_wb_buf_alloc = 0; + ufshcd_read_unit_desc_param(hba, + lun, + UNIT_DESC_PARAM_WB_BUF_ALLOC_UNITS, + (u8 *)&d_lu_wb_buf_alloc, + sizeof(d_lu_wb_buf_alloc)); + if (d_lu_wb_buf_alloc) { + dev_info->wb_dedicated_lu = lun; + break; + } + } + + if (!d_lu_wb_buf_alloc) + goto wb_disabled; + } + + if (!ufshcd_is_wb_buf_lifetime_available(hba)) + goto wb_disabled; + + return; + +wb_disabled: + hba->caps &= ~UFSHCD_CAP_WB_EN; +} + +static void ufshcd_temp_notif_probe(struct ufs_hba *hba, const u8 *desc_buf) +{ + struct ufs_dev_info *dev_info = &hba->dev_info; + u32 ext_ufs_feature; + u8 mask = 0; + + if (!(hba->caps & UFSHCD_CAP_TEMP_NOTIF) || dev_info->wspecversion < 0x300) + return; + + ext_ufs_feature = get_unaligned_be32(desc_buf + DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP); + + if (ext_ufs_feature & UFS_DEV_LOW_TEMP_NOTIF) + mask |= MASK_EE_TOO_LOW_TEMP; + + if (ext_ufs_feature & UFS_DEV_HIGH_TEMP_NOTIF) + mask |= MASK_EE_TOO_HIGH_TEMP; + + if (mask) { + ufshcd_enable_ee(hba, mask); + ufs_hwmon_probe(hba, mask); + } +} + +void ufshcd_fixup_dev_quirks(struct ufs_hba *hba, + const struct ufs_dev_quirk *fixups) +{ + const struct ufs_dev_quirk *f; + struct ufs_dev_info *dev_info = &hba->dev_info; + + if (!fixups) + return; + + for (f = fixups; f->quirk; f++) { + if ((f->wmanufacturerid == dev_info->wmanufacturerid || + f->wmanufacturerid == UFS_ANY_VENDOR) && + ((dev_info->model && + STR_PRFX_EQUAL(f->model, dev_info->model)) || + !strcmp(f->model, UFS_ANY_MODEL))) + hba->dev_quirks |= f->quirk; + } +} +EXPORT_SYMBOL_GPL(ufshcd_fixup_dev_quirks); + +static void ufs_fixup_device_setup(struct ufs_hba *hba) +{ + /* fix by general quirk table */ + ufshcd_fixup_dev_quirks(hba, ufs_fixups); + + /* allow vendors to fix quirks */ + ufshcd_vops_fixup_dev_quirks(hba); +} + +static int ufs_get_device_desc(struct ufs_hba *hba) +{ + int err; + u8 model_index; + u8 b_ufs_feature_sup; + u8 *desc_buf; + struct ufs_dev_info *dev_info = &hba->dev_info; + + desc_buf = kmalloc(QUERY_DESC_MAX_SIZE, GFP_KERNEL); + if (!desc_buf) { + err = -ENOMEM; + goto out; + } + + err = ufshcd_read_desc_param(hba, QUERY_DESC_IDN_DEVICE, 0, 0, desc_buf, + hba->desc_size[QUERY_DESC_IDN_DEVICE]); + if (err) { + dev_err(hba->dev, "%s: Failed reading Device Desc. err = %d\n", + __func__, err); + goto out; + } + + /* + * getting vendor (manufacturerID) and Bank Index in big endian + * format + */ + dev_info->wmanufacturerid = desc_buf[DEVICE_DESC_PARAM_MANF_ID] << 8 | + desc_buf[DEVICE_DESC_PARAM_MANF_ID + 1]; + + /* getting Specification Version in big endian format */ + dev_info->wspecversion = desc_buf[DEVICE_DESC_PARAM_SPEC_VER] << 8 | + desc_buf[DEVICE_DESC_PARAM_SPEC_VER + 1]; + b_ufs_feature_sup = desc_buf[DEVICE_DESC_PARAM_UFS_FEAT]; + + model_index = desc_buf[DEVICE_DESC_PARAM_PRDCT_NAME]; + + if (dev_info->wspecversion >= UFS_DEV_HPB_SUPPORT_VERSION && + (b_ufs_feature_sup & UFS_DEV_HPB_SUPPORT)) { + bool hpb_en = false; + + ufshpb_get_dev_info(hba, desc_buf); + + if (!ufshpb_is_legacy(hba)) + err = ufshcd_query_flag_retry(hba, + UPIU_QUERY_OPCODE_READ_FLAG, + QUERY_FLAG_IDN_HPB_EN, 0, + &hpb_en); + + if (ufshpb_is_legacy(hba) || (!err && hpb_en)) + dev_info->hpb_enabled = true; + } + + err = ufshcd_read_string_desc(hba, model_index, + &dev_info->model, SD_ASCII_STD); + if (err < 0) { + dev_err(hba->dev, "%s: Failed reading Product Name. err = %d\n", + __func__, err); + goto out; + } + + hba->luns_avail = desc_buf[DEVICE_DESC_PARAM_NUM_LU] + + desc_buf[DEVICE_DESC_PARAM_NUM_WLU]; + + ufs_fixup_device_setup(hba); + + ufshcd_wb_probe(hba, desc_buf); + + ufshcd_temp_notif_probe(hba, desc_buf); + + /* + * ufshcd_read_string_desc returns size of the string + * reset the error value + */ + err = 0; + +out: + kfree(desc_buf); + return err; +} + +static void ufs_put_device_desc(struct ufs_hba *hba) +{ + struct ufs_dev_info *dev_info = &hba->dev_info; + + kfree(dev_info->model); + dev_info->model = NULL; +} + +/** + * ufshcd_tune_pa_tactivate - Tunes PA_TActivate of local UniPro + * @hba: per-adapter instance + * + * PA_TActivate parameter can be tuned manually if UniPro version is less than + * 1.61. PA_TActivate needs to be greater than or equal to peerM-PHY's + * RX_MIN_ACTIVATETIME_CAPABILITY attribute. This optimal value can help reduce + * the hibern8 exit latency. + * + * Returns zero on success, non-zero error value on failure. + */ +static int ufshcd_tune_pa_tactivate(struct ufs_hba *hba) +{ + int ret = 0; + u32 peer_rx_min_activatetime = 0, tuned_pa_tactivate; + + ret = ufshcd_dme_peer_get(hba, + UIC_ARG_MIB_SEL( + RX_MIN_ACTIVATETIME_CAPABILITY, + UIC_ARG_MPHY_RX_GEN_SEL_INDEX(0)), + &peer_rx_min_activatetime); + if (ret) + goto out; + + /* make sure proper unit conversion is applied */ + tuned_pa_tactivate = + ((peer_rx_min_activatetime * RX_MIN_ACTIVATETIME_UNIT_US) + / PA_TACTIVATE_TIME_UNIT_US); + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TACTIVATE), + tuned_pa_tactivate); + +out: + return ret; +} + +/** + * ufshcd_tune_pa_hibern8time - Tunes PA_Hibern8Time of local UniPro + * @hba: per-adapter instance + * + * PA_Hibern8Time parameter can be tuned manually if UniPro version is less than + * 1.61. PA_Hibern8Time needs to be maximum of local M-PHY's + * TX_HIBERN8TIME_CAPABILITY & peer M-PHY's RX_HIBERN8TIME_CAPABILITY. + * This optimal value can help reduce the hibern8 exit latency. + * + * Returns zero on success, non-zero error value on failure. + */ +static int ufshcd_tune_pa_hibern8time(struct ufs_hba *hba) +{ + int ret = 0; + u32 local_tx_hibern8_time_cap = 0, peer_rx_hibern8_time_cap = 0; + u32 max_hibern8_time, tuned_pa_hibern8time; + + ret = ufshcd_dme_get(hba, + UIC_ARG_MIB_SEL(TX_HIBERN8TIME_CAPABILITY, + UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)), + &local_tx_hibern8_time_cap); + if (ret) + goto out; + + ret = ufshcd_dme_peer_get(hba, + UIC_ARG_MIB_SEL(RX_HIBERN8TIME_CAPABILITY, + UIC_ARG_MPHY_RX_GEN_SEL_INDEX(0)), + &peer_rx_hibern8_time_cap); + if (ret) + goto out; + + max_hibern8_time = max(local_tx_hibern8_time_cap, + peer_rx_hibern8_time_cap); + /* make sure proper unit conversion is applied */ + tuned_pa_hibern8time = ((max_hibern8_time * HIBERN8TIME_UNIT_US) + / PA_HIBERN8_TIME_UNIT_US); + ret = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HIBERN8TIME), + tuned_pa_hibern8time); +out: + return ret; +} + +/** + * ufshcd_quirk_tune_host_pa_tactivate - Ensures that host PA_TACTIVATE is + * less than device PA_TACTIVATE time. + * @hba: per-adapter instance + * + * Some UFS devices require host PA_TACTIVATE to be lower than device + * PA_TACTIVATE, we need to enable UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE quirk + * for such devices. + * + * Returns zero on success, non-zero error value on failure. + */ +static int ufshcd_quirk_tune_host_pa_tactivate(struct ufs_hba *hba) +{ + int ret = 0; + u32 granularity, peer_granularity; + u32 pa_tactivate, peer_pa_tactivate; + u32 pa_tactivate_us, peer_pa_tactivate_us; + static const u8 gran_to_us_table[] = {1, 4, 8, 16, 32, 100}; + + ret = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_GRANULARITY), + &granularity); + if (ret) + goto out; + + ret = ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_GRANULARITY), + &peer_granularity); + if (ret) + goto out; + + if ((granularity < PA_GRANULARITY_MIN_VAL) || + (granularity > PA_GRANULARITY_MAX_VAL)) { + dev_err(hba->dev, "%s: invalid host PA_GRANULARITY %d", + __func__, granularity); + return -EINVAL; + } + + if ((peer_granularity < PA_GRANULARITY_MIN_VAL) || + (peer_granularity > PA_GRANULARITY_MAX_VAL)) { + dev_err(hba->dev, "%s: invalid device PA_GRANULARITY %d", + __func__, peer_granularity); + return -EINVAL; + } + + ret = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_TACTIVATE), &pa_tactivate); + if (ret) + goto out; + + ret = ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_TACTIVATE), + &peer_pa_tactivate); + if (ret) + goto out; + + pa_tactivate_us = pa_tactivate * gran_to_us_table[granularity - 1]; + peer_pa_tactivate_us = peer_pa_tactivate * + gran_to_us_table[peer_granularity - 1]; + + if (pa_tactivate_us >= peer_pa_tactivate_us) { + u32 new_peer_pa_tactivate; + + new_peer_pa_tactivate = pa_tactivate_us / + gran_to_us_table[peer_granularity - 1]; + new_peer_pa_tactivate++; + ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(PA_TACTIVATE), + new_peer_pa_tactivate); + } + +out: + return ret; +} + +static void ufshcd_tune_unipro_params(struct ufs_hba *hba) +{ + if (ufshcd_is_unipro_pa_params_tuning_req(hba)) { + ufshcd_tune_pa_tactivate(hba); + ufshcd_tune_pa_hibern8time(hba); + } + + ufshcd_vops_apply_dev_quirks(hba); + + if (hba->dev_quirks & UFS_DEVICE_QUIRK_PA_TACTIVATE) + /* set 1ms timeout for PA_TACTIVATE */ + ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TACTIVATE), 10); + + if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE) + ufshcd_quirk_tune_host_pa_tactivate(hba); +} + +static void ufshcd_clear_dbg_ufs_stats(struct ufs_hba *hba) +{ + hba->ufs_stats.hibern8_exit_cnt = 0; + hba->ufs_stats.last_hibern8_exit_tstamp = ktime_set(0, 0); + hba->req_abort_count = 0; +} + +static int ufshcd_device_geo_params_init(struct ufs_hba *hba) +{ + int err; + size_t buff_len; + u8 *desc_buf; + + buff_len = hba->desc_size[QUERY_DESC_IDN_GEOMETRY]; + desc_buf = kmalloc(buff_len, GFP_KERNEL); + if (!desc_buf) { + err = -ENOMEM; + goto out; + } + + err = ufshcd_read_desc_param(hba, QUERY_DESC_IDN_GEOMETRY, 0, 0, + desc_buf, buff_len); + if (err) { + dev_err(hba->dev, "%s: Failed reading Geometry Desc. err = %d\n", + __func__, err); + goto out; + } + + if (desc_buf[GEOMETRY_DESC_PARAM_MAX_NUM_LUN] == 1) + hba->dev_info.max_lu_supported = 32; + else if (desc_buf[GEOMETRY_DESC_PARAM_MAX_NUM_LUN] == 0) + hba->dev_info.max_lu_supported = 8; + + if (hba->desc_size[QUERY_DESC_IDN_GEOMETRY] >= + GEOMETRY_DESC_PARAM_HPB_MAX_ACTIVE_REGS) + ufshpb_get_geo_info(hba, desc_buf); + +out: + kfree(desc_buf); + return err; +} + +struct ufs_ref_clk { + unsigned long freq_hz; + enum ufs_ref_clk_freq val; +}; + +static const struct ufs_ref_clk ufs_ref_clk_freqs[] = { + {19200000, REF_CLK_FREQ_19_2_MHZ}, + {26000000, REF_CLK_FREQ_26_MHZ}, + {38400000, REF_CLK_FREQ_38_4_MHZ}, + {52000000, REF_CLK_FREQ_52_MHZ}, + {0, REF_CLK_FREQ_INVAL}, +}; + +static enum ufs_ref_clk_freq +ufs_get_bref_clk_from_hz(unsigned long freq) +{ + int i; + + for (i = 0; ufs_ref_clk_freqs[i].freq_hz; i++) + if (ufs_ref_clk_freqs[i].freq_hz == freq) + return ufs_ref_clk_freqs[i].val; + + return REF_CLK_FREQ_INVAL; +} + +void ufshcd_parse_dev_ref_clk_freq(struct ufs_hba *hba, struct clk *refclk) +{ + unsigned long freq; + + freq = clk_get_rate(refclk); + + hba->dev_ref_clk_freq = + ufs_get_bref_clk_from_hz(freq); + + if (hba->dev_ref_clk_freq == REF_CLK_FREQ_INVAL) + dev_err(hba->dev, + "invalid ref_clk setting = %ld\n", freq); +} + +static int ufshcd_set_dev_ref_clk(struct ufs_hba *hba) +{ + int err; + u32 ref_clk; + u32 freq = hba->dev_ref_clk_freq; + + err = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR, + QUERY_ATTR_IDN_REF_CLK_FREQ, 0, 0, &ref_clk); + + if (err) { + dev_err(hba->dev, "failed reading bRefClkFreq. err = %d\n", + err); + goto out; + } + + if (ref_clk == freq) + goto out; /* nothing to update */ + + err = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR, + QUERY_ATTR_IDN_REF_CLK_FREQ, 0, 0, &freq); + + if (err) { + dev_err(hba->dev, "bRefClkFreq setting to %lu Hz failed\n", + ufs_ref_clk_freqs[freq].freq_hz); + goto out; + } + + dev_dbg(hba->dev, "bRefClkFreq setting to %lu Hz succeeded\n", + ufs_ref_clk_freqs[freq].freq_hz); + +out: + return err; +} + +static int ufshcd_device_params_init(struct ufs_hba *hba) +{ + bool flag; + int ret, i; + + /* Init device descriptor sizes */ + for (i = 0; i < QUERY_DESC_IDN_MAX; i++) + hba->desc_size[i] = QUERY_DESC_MAX_SIZE; + + /* Init UFS geometry descriptor related parameters */ + ret = ufshcd_device_geo_params_init(hba); + if (ret) + goto out; + + /* Check and apply UFS device quirks */ + ret = ufs_get_device_desc(hba); + if (ret) { + dev_err(hba->dev, "%s: Failed getting device info. err = %d\n", + __func__, ret); + goto out; + } + + ufshcd_get_ref_clk_gating_wait(hba); + + if (!ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_READ_FLAG, + QUERY_FLAG_IDN_PWR_ON_WPE, 0, &flag)) + hba->dev_info.f_power_on_wp_en = flag; + + /* Probe maximum power mode co-supported by both UFS host and device */ + if (ufshcd_get_max_pwr_mode(hba)) + dev_err(hba->dev, + "%s: Failed getting max supported power mode\n", + __func__); +out: + return ret; +} + +/** + * ufshcd_add_lus - probe and add UFS logical units + * @hba: per-adapter instance + */ +static int ufshcd_add_lus(struct ufs_hba *hba) +{ + int ret; + + /* Add required well known logical units to scsi mid layer */ + ret = ufshcd_scsi_add_wlus(hba); + if (ret) + goto out; + + /* Initialize devfreq after UFS device is detected */ + if (ufshcd_is_clkscaling_supported(hba)) { + memcpy(&hba->clk_scaling.saved_pwr_info.info, + &hba->pwr_info, + sizeof(struct ufs_pa_layer_attr)); + hba->clk_scaling.saved_pwr_info.is_valid = true; + hba->clk_scaling.is_allowed = true; + + ret = ufshcd_devfreq_init(hba); + if (ret) + goto out; + + hba->clk_scaling.is_enabled = true; + ufshcd_init_clk_scaling_sysfs(hba); + } + + ufs_bsg_probe(hba); + ufshpb_init(hba); + scsi_scan_host(hba->host); + +out: + return ret; +} + +/** + * ufshcd_probe_hba - probe hba to detect device and initialize it + * @hba: per-adapter instance + * @init_dev_params: whether or not to call ufshcd_device_params_init(). + * + * Execute link-startup and verify device initialization + */ +static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params) +{ + int ret; + unsigned long flags; + ktime_t start = ktime_get(); + + hba->ufshcd_state = UFSHCD_STATE_RESET; + + ret = ufshcd_link_startup(hba); + if (ret) + goto out; + + if (hba->quirks & UFSHCD_QUIRK_SKIP_PH_CONFIGURATION) + goto out; + + /* Debug counters initialization */ + ufshcd_clear_dbg_ufs_stats(hba); + + /* UniPro link is active now */ + ufshcd_set_link_active(hba); + + /* Verify device initialization by sending NOP OUT UPIU */ + ret = ufshcd_verify_dev_init(hba); + if (ret) + goto out; + + /* Initiate UFS initialization, and waiting until completion */ + ret = ufshcd_complete_dev_init(hba); + if (ret) + goto out; + + /* + * Initialize UFS device parameters used by driver, these + * parameters are associated with UFS descriptors. + */ + if (init_dev_params) { + ret = ufshcd_device_params_init(hba); + if (ret) + goto out; + } + + ufshcd_tune_unipro_params(hba); + + /* UFS device is also active now */ + ufshcd_set_ufs_dev_active(hba); + ufshcd_force_reset_auto_bkops(hba); + + /* Gear up to HS gear if supported */ + if (hba->max_pwr_info.is_valid) { + /* + * Set the right value to bRefClkFreq before attempting to + * switch to HS gears. + */ + if (hba->dev_ref_clk_freq != REF_CLK_FREQ_INVAL) + ufshcd_set_dev_ref_clk(hba); + ret = ufshcd_config_pwr_mode(hba, &hba->max_pwr_info.info); + if (ret) { + dev_err(hba->dev, "%s: Failed setting power mode, err = %d\n", + __func__, ret); + goto out; + } + ufshcd_print_pwr_info(hba); + } + + /* + * bActiveICCLevel is volatile for UFS device (as per latest v2.1 spec) + * and for removable UFS card as well, hence always set the parameter. + * Note: Error handler may issue the device reset hence resetting + * bActiveICCLevel as well so it is always safe to set this here. + */ + ufshcd_set_active_icc_lvl(hba); + + /* Enable UFS Write Booster if supported */ + ufshcd_configure_wb(hba); + + if (hba->ee_usr_mask) + ufshcd_write_ee_control(hba); + /* Enable Auto-Hibernate if configured */ + ufshcd_auto_hibern8_enable(hba); + + ufshpb_toggle_state(hba, HPB_RESET, HPB_PRESENT); +out: + spin_lock_irqsave(hba->host->host_lock, flags); + if (ret) + hba->ufshcd_state = UFSHCD_STATE_ERROR; + else if (hba->ufshcd_state == UFSHCD_STATE_RESET) + hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL; + spin_unlock_irqrestore(hba->host->host_lock, flags); + + trace_ufshcd_init(dev_name(hba->dev), ret, + ktime_to_us(ktime_sub(ktime_get(), start)), + hba->curr_dev_pwr_mode, hba->uic_link_state); + return ret; +} + +/** + * ufshcd_async_scan - asynchronous execution for probing hba + * @data: data pointer to pass to this function + * @cookie: cookie data + */ +static void ufshcd_async_scan(void *data, async_cookie_t cookie) +{ + struct ufs_hba *hba = (struct ufs_hba *)data; + int ret; + + down(&hba->host_sem); + /* Initialize hba, detect and initialize UFS device */ + ret = ufshcd_probe_hba(hba, true); + up(&hba->host_sem); + if (ret) + goto out; + + /* Probe and add UFS logical units */ + ret = ufshcd_add_lus(hba); + +out: + pm_runtime_put_sync(hba->dev); + + if (ret) + dev_err(hba->dev, "%s failed: %d\n", __func__, ret); +} + +static const struct attribute_group *ufshcd_driver_groups[] = { + &ufs_sysfs_unit_descriptor_group, + &ufs_sysfs_lun_attributes_group, +#ifdef CONFIG_SCSI_UFS_HPB + &ufs_sysfs_hpb_stat_group, + &ufs_sysfs_hpb_param_group, +#endif + NULL, +}; + +static struct ufs_hba_variant_params ufs_hba_vps = { + .hba_enable_delay_us = 1000, + .wb_flush_threshold = UFS_WB_BUF_REMAIN_PERCENT(40), + .devfreq_profile.polling_ms = 100, + .devfreq_profile.target = ufshcd_devfreq_target, + .devfreq_profile.get_dev_status = ufshcd_devfreq_get_dev_status, + .ondemand_data.upthreshold = 70, + .ondemand_data.downdifferential = 5, +}; + +static struct scsi_host_template ufshcd_driver_template = { + .module = THIS_MODULE, + .name = UFSHCD, + .proc_name = UFSHCD, + .map_queues = ufshcd_map_queues, + .queuecommand = ufshcd_queuecommand, + .mq_poll = ufshcd_poll, + .slave_alloc = ufshcd_slave_alloc, + .slave_configure = ufshcd_slave_configure, + .slave_destroy = ufshcd_slave_destroy, + .change_queue_depth = ufshcd_change_queue_depth, + .eh_abort_handler = ufshcd_abort, + .eh_device_reset_handler = ufshcd_eh_device_reset_handler, + .eh_host_reset_handler = ufshcd_eh_host_reset_handler, + .this_id = -1, + .sg_tablesize = SG_ALL, + .cmd_per_lun = UFSHCD_CMD_PER_LUN, + .can_queue = UFSHCD_CAN_QUEUE, + .max_segment_size = PRDT_DATA_BYTE_COUNT_MAX, + .max_sectors = (1 << 20) / SECTOR_SIZE, /* 1 MiB */ + .max_host_blocked = 1, + .track_queue_depth = 1, + .sdev_groups = ufshcd_driver_groups, + .dma_boundary = PAGE_SIZE - 1, + .rpm_autosuspend_delay = RPM_AUTOSUSPEND_DELAY_MS, +}; + +static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg, + int ua) +{ + int ret; + + if (!vreg) + return 0; + + /* + * "set_load" operation shall be required on those regulators + * which specifically configured current limitation. Otherwise + * zero max_uA may cause unexpected behavior when regulator is + * enabled or set as high power mode. + */ + if (!vreg->max_uA) + return 0; + + ret = regulator_set_load(vreg->reg, ua); + if (ret < 0) { + dev_err(dev, "%s: %s set load (ua=%d) failed, err=%d\n", + __func__, vreg->name, ua, ret); + } + + return ret; +} + +static inline int ufshcd_config_vreg_lpm(struct ufs_hba *hba, + struct ufs_vreg *vreg) +{ + return ufshcd_config_vreg_load(hba->dev, vreg, UFS_VREG_LPM_LOAD_UA); +} + +static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba, + struct ufs_vreg *vreg) +{ + if (!vreg) + return 0; + + return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA); +} + +static int ufshcd_config_vreg(struct device *dev, + struct ufs_vreg *vreg, bool on) +{ + if (regulator_count_voltages(vreg->reg) <= 0) + return 0; + + return ufshcd_config_vreg_load(dev, vreg, on ? vreg->max_uA : 0); +} + +static int ufshcd_enable_vreg(struct device *dev, struct ufs_vreg *vreg) +{ + int ret = 0; + + if (!vreg || vreg->enabled) + goto out; + + ret = ufshcd_config_vreg(dev, vreg, true); + if (!ret) + ret = regulator_enable(vreg->reg); + + if (!ret) + vreg->enabled = true; + else + dev_err(dev, "%s: %s enable failed, err=%d\n", + __func__, vreg->name, ret); +out: + return ret; +} + +static int ufshcd_disable_vreg(struct device *dev, struct ufs_vreg *vreg) +{ + int ret = 0; + + if (!vreg || !vreg->enabled || vreg->always_on) + goto out; + + ret = regulator_disable(vreg->reg); + + if (!ret) { + /* ignore errors on applying disable config */ + ufshcd_config_vreg(dev, vreg, false); + vreg->enabled = false; + } else { + dev_err(dev, "%s: %s disable failed, err=%d\n", + __func__, vreg->name, ret); + } +out: + return ret; +} + +static int ufshcd_setup_vreg(struct ufs_hba *hba, bool on) +{ + int ret = 0; + struct device *dev = hba->dev; + struct ufs_vreg_info *info = &hba->vreg_info; + + ret = ufshcd_toggle_vreg(dev, info->vcc, on); + if (ret) + goto out; + + ret = ufshcd_toggle_vreg(dev, info->vccq, on); + if (ret) + goto out; + + ret = ufshcd_toggle_vreg(dev, info->vccq2, on); + +out: + if (ret) { + ufshcd_toggle_vreg(dev, info->vccq2, false); + ufshcd_toggle_vreg(dev, info->vccq, false); + ufshcd_toggle_vreg(dev, info->vcc, false); + } + return ret; +} + +static int ufshcd_setup_hba_vreg(struct ufs_hba *hba, bool on) +{ + struct ufs_vreg_info *info = &hba->vreg_info; + + return ufshcd_toggle_vreg(hba->dev, info->vdd_hba, on); +} + +int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg) +{ + int ret = 0; + + if (!vreg) + goto out; + + vreg->reg = devm_regulator_get(dev, vreg->name); + if (IS_ERR(vreg->reg)) { + ret = PTR_ERR(vreg->reg); + dev_err(dev, "%s: %s get failed, err=%d\n", + __func__, vreg->name, ret); + } +out: + return ret; +} +EXPORT_SYMBOL_GPL(ufshcd_get_vreg); + +static int ufshcd_init_vreg(struct ufs_hba *hba) +{ + int ret = 0; + struct device *dev = hba->dev; + struct ufs_vreg_info *info = &hba->vreg_info; + + ret = ufshcd_get_vreg(dev, info->vcc); + if (ret) + goto out; + + ret = ufshcd_get_vreg(dev, info->vccq); + if (!ret) + ret = ufshcd_get_vreg(dev, info->vccq2); +out: + return ret; +} + +static int ufshcd_init_hba_vreg(struct ufs_hba *hba) +{ + struct ufs_vreg_info *info = &hba->vreg_info; + + return ufshcd_get_vreg(hba->dev, info->vdd_hba); +} + +static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on) +{ + int ret = 0; + struct ufs_clk_info *clki; + struct list_head *head = &hba->clk_list_head; + unsigned long flags; + ktime_t start = ktime_get(); + bool clk_state_changed = false; + + if (list_empty(head)) + goto out; + + ret = ufshcd_vops_setup_clocks(hba, on, PRE_CHANGE); + if (ret) + return ret; + + list_for_each_entry(clki, head, list) { + if (!IS_ERR_OR_NULL(clki->clk)) { + /* + * Don't disable clocks which are needed + * to keep the link active. + */ + if (ufshcd_is_link_active(hba) && + clki->keep_link_active) + continue; + + clk_state_changed = on ^ clki->enabled; + if (on && !clki->enabled) { + ret = clk_prepare_enable(clki->clk); + if (ret) { + dev_err(hba->dev, "%s: %s prepare enable failed, %d\n", + __func__, clki->name, ret); + goto out; + } + } else if (!on && clki->enabled) { + clk_disable_unprepare(clki->clk); + } + clki->enabled = on; + dev_dbg(hba->dev, "%s: clk: %s %sabled\n", __func__, + clki->name, on ? "en" : "dis"); + } + } + + ret = ufshcd_vops_setup_clocks(hba, on, POST_CHANGE); + if (ret) + return ret; + +out: + if (ret) { + list_for_each_entry(clki, head, list) { + if (!IS_ERR_OR_NULL(clki->clk) && clki->enabled) + clk_disable_unprepare(clki->clk); + } + } else if (!ret && on) { + spin_lock_irqsave(hba->host->host_lock, flags); + hba->clk_gating.state = CLKS_ON; + trace_ufshcd_clk_gating(dev_name(hba->dev), + hba->clk_gating.state); + spin_unlock_irqrestore(hba->host->host_lock, flags); + } + + if (clk_state_changed) + trace_ufshcd_profile_clk_gating(dev_name(hba->dev), + (on ? "on" : "off"), + ktime_to_us(ktime_sub(ktime_get(), start)), ret); + return ret; +} + +static enum ufs_ref_clk_freq ufshcd_parse_ref_clk_property(struct ufs_hba *hba) +{ + u32 freq; + int ret = device_property_read_u32(hba->dev, "ref-clk-freq", &freq); + + if (ret) { + dev_dbg(hba->dev, "Cannot query 'ref-clk-freq' property = %d", ret); + return REF_CLK_FREQ_INVAL; + } + + return ufs_get_bref_clk_from_hz(freq); +} + +static int ufshcd_init_clocks(struct ufs_hba *hba) +{ + int ret = 0; + struct ufs_clk_info *clki; + struct device *dev = hba->dev; + struct list_head *head = &hba->clk_list_head; + + if (list_empty(head)) + goto out; + + list_for_each_entry(clki, head, list) { + if (!clki->name) + continue; + + clki->clk = devm_clk_get(dev, clki->name); + if (IS_ERR(clki->clk)) { + ret = PTR_ERR(clki->clk); + dev_err(dev, "%s: %s clk get failed, %d\n", + __func__, clki->name, ret); + goto out; + } + + /* + * Parse device ref clk freq as per device tree "ref_clk". + * Default dev_ref_clk_freq is set to REF_CLK_FREQ_INVAL + * in ufshcd_alloc_host(). + */ + if (!strcmp(clki->name, "ref_clk")) + ufshcd_parse_dev_ref_clk_freq(hba, clki->clk); + + if (clki->max_freq) { + ret = clk_set_rate(clki->clk, clki->max_freq); + if (ret) { + dev_err(hba->dev, "%s: %s clk set rate(%dHz) failed, %d\n", + __func__, clki->name, + clki->max_freq, ret); + goto out; + } + clki->curr_freq = clki->max_freq; + } + dev_dbg(dev, "%s: clk: %s, rate: %lu\n", __func__, + clki->name, clk_get_rate(clki->clk)); + } +out: + return ret; +} + +static int ufshcd_variant_hba_init(struct ufs_hba *hba) +{ + int err = 0; + + if (!hba->vops) + goto out; + + err = ufshcd_vops_init(hba); + if (err) + dev_err(hba->dev, "%s: variant %s init failed err %d\n", + __func__, ufshcd_get_var_name(hba), err); +out: + return err; +} + +static void ufshcd_variant_hba_exit(struct ufs_hba *hba) +{ + if (!hba->vops) + return; + + ufshcd_vops_exit(hba); +} + +static int ufshcd_hba_init(struct ufs_hba *hba) +{ + int err; + + /* + * Handle host controller power separately from the UFS device power + * rails as it will help controlling the UFS host controller power + * collapse easily which is different than UFS device power collapse. + * Also, enable the host controller power before we go ahead with rest + * of the initialization here. + */ + err = ufshcd_init_hba_vreg(hba); + if (err) + goto out; + + err = ufshcd_setup_hba_vreg(hba, true); + if (err) + goto out; + + err = ufshcd_init_clocks(hba); + if (err) + goto out_disable_hba_vreg; + + if (hba->dev_ref_clk_freq == REF_CLK_FREQ_INVAL) + hba->dev_ref_clk_freq = ufshcd_parse_ref_clk_property(hba); + + err = ufshcd_setup_clocks(hba, true); + if (err) + goto out_disable_hba_vreg; + + err = ufshcd_init_vreg(hba); + if (err) + goto out_disable_clks; + + err = ufshcd_setup_vreg(hba, true); + if (err) + goto out_disable_clks; + + err = ufshcd_variant_hba_init(hba); + if (err) + goto out_disable_vreg; + + ufs_debugfs_hba_init(hba); + + hba->is_powered = true; + goto out; + +out_disable_vreg: + ufshcd_setup_vreg(hba, false); +out_disable_clks: + ufshcd_setup_clocks(hba, false); +out_disable_hba_vreg: + ufshcd_setup_hba_vreg(hba, false); +out: + return err; +} + +static void ufshcd_hba_exit(struct ufs_hba *hba) +{ + if (hba->is_powered) { + ufshcd_exit_clk_scaling(hba); + ufshcd_exit_clk_gating(hba); + if (hba->eh_wq) + destroy_workqueue(hba->eh_wq); + ufs_debugfs_hba_exit(hba); + ufshcd_variant_hba_exit(hba); + ufshcd_setup_vreg(hba, false); + ufshcd_setup_clocks(hba, false); + ufshcd_setup_hba_vreg(hba, false); + hba->is_powered = false; + ufs_put_device_desc(hba); + } +} + +/** + * ufshcd_set_dev_pwr_mode - sends START STOP UNIT command to set device + * power mode + * @hba: per adapter instance + * @pwr_mode: device power mode to set + * + * Returns 0 if requested power mode is set successfully + * Returns < 0 if failed to set the requested power mode + */ +static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba, + enum ufs_dev_pwr_mode pwr_mode) +{ + unsigned char cmd[6] = { START_STOP }; + struct scsi_sense_hdr sshdr; + struct scsi_device *sdp; + unsigned long flags; + int ret, retries; + + spin_lock_irqsave(hba->host->host_lock, flags); + sdp = hba->ufs_device_wlun; + if (sdp) { + ret = scsi_device_get(sdp); + if (!ret && !scsi_device_online(sdp)) { + ret = -ENODEV; + scsi_device_put(sdp); + } + } else { + ret = -ENODEV; + } + spin_unlock_irqrestore(hba->host->host_lock, flags); + + if (ret) + return ret; + + /* + * If scsi commands fail, the scsi mid-layer schedules scsi error- + * handling, which would wait for host to be resumed. Since we know + * we are functional while we are here, skip host resume in error + * handling context. + */ + hba->host->eh_noresume = 1; + + cmd[4] = pwr_mode << 4; + + /* + * Current function would be generally called from the power management + * callbacks hence set the RQF_PM flag so that it doesn't resume the + * already suspended childs. + */ + for (retries = 3; retries > 0; --retries) { + ret = scsi_execute(sdp, cmd, DMA_NONE, NULL, 0, NULL, &sshdr, + HZ, 0, 0, RQF_PM, NULL); + /* + * scsi_execute() only returns a negative value if the request + * queue is dying. + */ + if (ret <= 0) + break; + } + if (ret) { + sdev_printk(KERN_WARNING, sdp, + "START_STOP failed for power mode: %d, result %x\n", + pwr_mode, ret); + if (ret > 0) { + if (scsi_sense_valid(&sshdr)) + scsi_print_sense_hdr(sdp, NULL, &sshdr); + ret = -EIO; + } + } + + if (!ret) + hba->curr_dev_pwr_mode = pwr_mode; + + scsi_device_put(sdp); + hba->host->eh_noresume = 0; + return ret; +} + +static int ufshcd_link_state_transition(struct ufs_hba *hba, + enum uic_link_state req_link_state, + int check_for_bkops) +{ + int ret = 0; + + if (req_link_state == hba->uic_link_state) + return 0; + + if (req_link_state == UIC_LINK_HIBERN8_STATE) { + ret = ufshcd_uic_hibern8_enter(hba); + if (!ret) { + ufshcd_set_link_hibern8(hba); + } else { + dev_err(hba->dev, "%s: hibern8 enter failed %d\n", + __func__, ret); + goto out; + } + } + /* + * If autobkops is enabled, link can't be turned off because + * turning off the link would also turn off the device, except in the + * case of DeepSleep where the device is expected to remain powered. + */ + else if ((req_link_state == UIC_LINK_OFF_STATE) && + (!check_for_bkops || !hba->auto_bkops_enabled)) { + /* + * Let's make sure that link is in low power mode, we are doing + * this currently by putting the link in Hibern8. Otherway to + * put the link in low power mode is to send the DME end point + * to device and then send the DME reset command to local + * unipro. But putting the link in hibern8 is much faster. + * + * Note also that putting the link in Hibern8 is a requirement + * for entering DeepSleep. + */ + ret = ufshcd_uic_hibern8_enter(hba); + if (ret) { + dev_err(hba->dev, "%s: hibern8 enter failed %d\n", + __func__, ret); + goto out; + } + /* + * Change controller state to "reset state" which + * should also put the link in off/reset state + */ + ufshcd_hba_stop(hba); + /* + * TODO: Check if we need any delay to make sure that + * controller is reset + */ + ufshcd_set_link_off(hba); + } + +out: + return ret; +} + +static void ufshcd_vreg_set_lpm(struct ufs_hba *hba) +{ + bool vcc_off = false; + + /* + * It seems some UFS devices may keep drawing more than sleep current + * (atleast for 500us) from UFS rails (especially from VCCQ rail). + * To avoid this situation, add 2ms delay before putting these UFS + * rails in LPM mode. + */ + if (!ufshcd_is_link_active(hba) && + hba->dev_quirks & UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM) + usleep_range(2000, 2100); + + /* + * If UFS device is either in UFS_Sleep turn off VCC rail to save some + * power. + * + * If UFS device and link is in OFF state, all power supplies (VCC, + * VCCQ, VCCQ2) can be turned off if power on write protect is not + * required. If UFS link is inactive (Hibern8 or OFF state) and device + * is in sleep state, put VCCQ & VCCQ2 rails in LPM mode. + * + * Ignore the error returned by ufshcd_toggle_vreg() as device is anyway + * in low power state which would save some power. + * + * If Write Booster is enabled and the device needs to flush the WB + * buffer OR if bkops status is urgent for WB, keep Vcc on. + */ + if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba) && + !hba->dev_info.is_lu_power_on_wp) { + ufshcd_setup_vreg(hba, false); + vcc_off = true; + } else if (!ufshcd_is_ufs_dev_active(hba)) { + ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false); + vcc_off = true; + if (ufshcd_is_link_hibern8(hba) || ufshcd_is_link_off(hba)) { + ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq); + ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2); + } + } + + /* + * Some UFS devices require delay after VCC power rail is turned-off. + */ + if (vcc_off && hba->vreg_info.vcc && + hba->dev_quirks & UFS_DEVICE_QUIRK_DELAY_AFTER_LPM) + usleep_range(5000, 5100); +} + +#ifdef CONFIG_PM +static int ufshcd_vreg_set_hpm(struct ufs_hba *hba) +{ + int ret = 0; + + if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba) && + !hba->dev_info.is_lu_power_on_wp) { + ret = ufshcd_setup_vreg(hba, true); + } else if (!ufshcd_is_ufs_dev_active(hba)) { + if (!ufshcd_is_link_active(hba)) { + ret = ufshcd_config_vreg_hpm(hba, hba->vreg_info.vccq); + if (ret) + goto vcc_disable; + ret = ufshcd_config_vreg_hpm(hba, hba->vreg_info.vccq2); + if (ret) + goto vccq_lpm; + } + ret = ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, true); + } + goto out; + +vccq_lpm: + ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq); +vcc_disable: + ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false); +out: + return ret; +} +#endif /* CONFIG_PM */ + +static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba) +{ + if (ufshcd_is_link_off(hba) || ufshcd_can_aggressive_pc(hba)) + ufshcd_setup_hba_vreg(hba, false); +} + +static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba) +{ + if (ufshcd_is_link_off(hba) || ufshcd_can_aggressive_pc(hba)) + ufshcd_setup_hba_vreg(hba, true); +} + +static int __ufshcd_wl_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) +{ + int ret = 0; + int check_for_bkops; + enum ufs_pm_level pm_lvl; + enum ufs_dev_pwr_mode req_dev_pwr_mode; + enum uic_link_state req_link_state; + + hba->pm_op_in_progress = true; + if (pm_op != UFS_SHUTDOWN_PM) { + pm_lvl = pm_op == UFS_RUNTIME_PM ? + hba->rpm_lvl : hba->spm_lvl; + req_dev_pwr_mode = ufs_get_pm_lvl_to_dev_pwr_mode(pm_lvl); + req_link_state = ufs_get_pm_lvl_to_link_pwr_state(pm_lvl); + } else { + req_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE; + req_link_state = UIC_LINK_OFF_STATE; + } + + ufshpb_suspend(hba); + + /* + * If we can't transition into any of the low power modes + * just gate the clocks. + */ + ufshcd_hold(hba, false); + hba->clk_gating.is_suspended = true; + + if (ufshcd_is_clkscaling_supported(hba)) + ufshcd_clk_scaling_suspend(hba, true); + + if (req_dev_pwr_mode == UFS_ACTIVE_PWR_MODE && + req_link_state == UIC_LINK_ACTIVE_STATE) { + goto vops_suspend; + } + + if ((req_dev_pwr_mode == hba->curr_dev_pwr_mode) && + (req_link_state == hba->uic_link_state)) + goto enable_scaling; + + /* UFS device & link must be active before we enter in this function */ + if (!ufshcd_is_ufs_dev_active(hba) || !ufshcd_is_link_active(hba)) { + ret = -EINVAL; + goto enable_scaling; + } + + if (pm_op == UFS_RUNTIME_PM) { + if (ufshcd_can_autobkops_during_suspend(hba)) { + /* + * The device is idle with no requests in the queue, + * allow background operations if bkops status shows + * that performance might be impacted. + */ + ret = ufshcd_urgent_bkops(hba); + if (ret) { + /* + * If return err in suspend flow, IO will hang. + * Trigger error handler and break suspend for + * error recovery. + */ + ufshcd_force_error_recovery(hba); + ret = -EBUSY; + goto enable_scaling; + } + } else { + /* make sure that auto bkops is disabled */ + ufshcd_disable_auto_bkops(hba); + } + /* + * If device needs to do BKOP or WB buffer flush during + * Hibern8, keep device power mode as "active power mode" + * and VCC supply. + */ + hba->dev_info.b_rpm_dev_flush_capable = + hba->auto_bkops_enabled || + (((req_link_state == UIC_LINK_HIBERN8_STATE) || + ((req_link_state == UIC_LINK_ACTIVE_STATE) && + ufshcd_is_auto_hibern8_enabled(hba))) && + ufshcd_wb_need_flush(hba)); + } + + flush_work(&hba->eeh_work); + + ret = ufshcd_vops_suspend(hba, pm_op, PRE_CHANGE); + if (ret) + goto enable_scaling; + + if (req_dev_pwr_mode != hba->curr_dev_pwr_mode) { + if (pm_op != UFS_RUNTIME_PM) + /* ensure that bkops is disabled */ + ufshcd_disable_auto_bkops(hba); + + if (!hba->dev_info.b_rpm_dev_flush_capable) { + ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode); + if (ret && pm_op != UFS_SHUTDOWN_PM) { + /* + * If return err in suspend flow, IO will hang. + * Trigger error handler and break suspend for + * error recovery. + */ + ufshcd_force_error_recovery(hba); + ret = -EBUSY; + } + if (ret) + goto enable_scaling; + } + } + + /* + * In the case of DeepSleep, the device is expected to remain powered + * with the link off, so do not check for bkops. + */ + check_for_bkops = !ufshcd_is_ufs_dev_deepsleep(hba); + ret = ufshcd_link_state_transition(hba, req_link_state, check_for_bkops); + if (ret && pm_op != UFS_SHUTDOWN_PM) { + /* + * If return err in suspend flow, IO will hang. + * Trigger error handler and break suspend for + * error recovery. + */ + ufshcd_force_error_recovery(hba); + ret = -EBUSY; + } + if (ret) + goto set_dev_active; + +vops_suspend: + /* + * Call vendor specific suspend callback. As these callbacks may access + * vendor specific host controller register space call them before the + * host clocks are ON. + */ + ret = ufshcd_vops_suspend(hba, pm_op, POST_CHANGE); + if (ret) + goto set_link_active; + goto out; + +set_link_active: + /* + * Device hardware reset is required to exit DeepSleep. Also, for + * DeepSleep, the link is off so host reset and restore will be done + * further below. + */ + if (ufshcd_is_ufs_dev_deepsleep(hba)) { + ufshcd_device_reset(hba); + WARN_ON(!ufshcd_is_link_off(hba)); + } + if (ufshcd_is_link_hibern8(hba) && !ufshcd_uic_hibern8_exit(hba)) + ufshcd_set_link_active(hba); + else if (ufshcd_is_link_off(hba)) + ufshcd_host_reset_and_restore(hba); +set_dev_active: + /* Can also get here needing to exit DeepSleep */ + if (ufshcd_is_ufs_dev_deepsleep(hba)) { + ufshcd_device_reset(hba); + ufshcd_host_reset_and_restore(hba); + } + if (!ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE)) + ufshcd_disable_auto_bkops(hba); +enable_scaling: + if (ufshcd_is_clkscaling_supported(hba)) + ufshcd_clk_scaling_suspend(hba, false); + + hba->dev_info.b_rpm_dev_flush_capable = false; +out: + if (hba->dev_info.b_rpm_dev_flush_capable) { + schedule_delayed_work(&hba->rpm_dev_flush_recheck_work, + msecs_to_jiffies(RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS)); + } + + if (ret) { + ufshcd_update_evt_hist(hba, UFS_EVT_WL_SUSP_ERR, (u32)ret); + hba->clk_gating.is_suspended = false; + ufshcd_release(hba); + ufshpb_resume(hba); + } + hba->pm_op_in_progress = false; + return ret; +} + +#ifdef CONFIG_PM +static int __ufshcd_wl_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) +{ + int ret; + enum uic_link_state old_link_state = hba->uic_link_state; + + hba->pm_op_in_progress = true; + + /* + * Call vendor specific resume callback. As these callbacks may access + * vendor specific host controller register space call them when the + * host clocks are ON. + */ + ret = ufshcd_vops_resume(hba, pm_op); + if (ret) + goto out; + + /* For DeepSleep, the only supported option is to have the link off */ + WARN_ON(ufshcd_is_ufs_dev_deepsleep(hba) && !ufshcd_is_link_off(hba)); + + if (ufshcd_is_link_hibern8(hba)) { + ret = ufshcd_uic_hibern8_exit(hba); + if (!ret) { + ufshcd_set_link_active(hba); + } else { + dev_err(hba->dev, "%s: hibern8 exit failed %d\n", + __func__, ret); + goto vendor_suspend; + } + } else if (ufshcd_is_link_off(hba)) { + /* + * A full initialization of the host and the device is + * required since the link was put to off during suspend. + * Note, in the case of DeepSleep, the device will exit + * DeepSleep due to device reset. + */ + ret = ufshcd_reset_and_restore(hba); + /* + * ufshcd_reset_and_restore() should have already + * set the link state as active + */ + if (ret || !ufshcd_is_link_active(hba)) + goto vendor_suspend; + } + + if (!ufshcd_is_ufs_dev_active(hba)) { + ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE); + if (ret) + goto set_old_link_state; + } + + if (ufshcd_keep_autobkops_enabled_except_suspend(hba)) + ufshcd_enable_auto_bkops(hba); + else + /* + * If BKOPs operations are urgently needed at this moment then + * keep auto-bkops enabled or else disable it. + */ + ufshcd_urgent_bkops(hba); + + if (hba->ee_usr_mask) + ufshcd_write_ee_control(hba); + + if (ufshcd_is_clkscaling_supported(hba)) + ufshcd_clk_scaling_suspend(hba, false); + + if (hba->dev_info.b_rpm_dev_flush_capable) { + hba->dev_info.b_rpm_dev_flush_capable = false; + cancel_delayed_work(&hba->rpm_dev_flush_recheck_work); + } + + /* Enable Auto-Hibernate if configured */ + ufshcd_auto_hibern8_enable(hba); + + ufshpb_resume(hba); + goto out; + +set_old_link_state: + ufshcd_link_state_transition(hba, old_link_state, 0); +vendor_suspend: + ufshcd_vops_suspend(hba, pm_op, PRE_CHANGE); + ufshcd_vops_suspend(hba, pm_op, POST_CHANGE); +out: + if (ret) + ufshcd_update_evt_hist(hba, UFS_EVT_WL_RES_ERR, (u32)ret); + hba->clk_gating.is_suspended = false; + ufshcd_release(hba); + hba->pm_op_in_progress = false; + return ret; +} + +static int ufshcd_wl_runtime_suspend(struct device *dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct ufs_hba *hba; + int ret; + ktime_t start = ktime_get(); + + hba = shost_priv(sdev->host); + + ret = __ufshcd_wl_suspend(hba, UFS_RUNTIME_PM); + if (ret) + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); + + trace_ufshcd_wl_runtime_suspend(dev_name(dev), ret, + ktime_to_us(ktime_sub(ktime_get(), start)), + hba->curr_dev_pwr_mode, hba->uic_link_state); + + return ret; +} + +static int ufshcd_wl_runtime_resume(struct device *dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct ufs_hba *hba; + int ret = 0; + ktime_t start = ktime_get(); + + hba = shost_priv(sdev->host); + + ret = __ufshcd_wl_resume(hba, UFS_RUNTIME_PM); + if (ret) + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); + + trace_ufshcd_wl_runtime_resume(dev_name(dev), ret, + ktime_to_us(ktime_sub(ktime_get(), start)), + hba->curr_dev_pwr_mode, hba->uic_link_state); + + return ret; +} +#endif + +#ifdef CONFIG_PM_SLEEP +static int ufshcd_wl_suspend(struct device *dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct ufs_hba *hba; + int ret = 0; + ktime_t start = ktime_get(); + + hba = shost_priv(sdev->host); + down(&hba->host_sem); + + if (pm_runtime_suspended(dev)) + goto out; + + ret = __ufshcd_wl_suspend(hba, UFS_SYSTEM_PM); + if (ret) { + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); + up(&hba->host_sem); + } + +out: + if (!ret) + hba->is_sys_suspended = true; + trace_ufshcd_wl_suspend(dev_name(dev), ret, + ktime_to_us(ktime_sub(ktime_get(), start)), + hba->curr_dev_pwr_mode, hba->uic_link_state); + + return ret; +} + +static int ufshcd_wl_resume(struct device *dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct ufs_hba *hba; + int ret = 0; + ktime_t start = ktime_get(); + + hba = shost_priv(sdev->host); + + if (pm_runtime_suspended(dev)) + goto out; + + ret = __ufshcd_wl_resume(hba, UFS_SYSTEM_PM); + if (ret) + dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret); +out: + trace_ufshcd_wl_resume(dev_name(dev), ret, + ktime_to_us(ktime_sub(ktime_get(), start)), + hba->curr_dev_pwr_mode, hba->uic_link_state); + if (!ret) + hba->is_sys_suspended = false; + up(&hba->host_sem); + return ret; +} +#endif + +static void ufshcd_wl_shutdown(struct device *dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct ufs_hba *hba; + + hba = shost_priv(sdev->host); + + down(&hba->host_sem); + hba->shutting_down = true; + up(&hba->host_sem); + + /* Turn on everything while shutting down */ + ufshcd_rpm_get_sync(hba); + scsi_device_quiesce(sdev); + shost_for_each_device(sdev, hba->host) { + if (sdev == hba->ufs_device_wlun) + continue; + scsi_device_quiesce(sdev); + } + __ufshcd_wl_suspend(hba, UFS_SHUTDOWN_PM); +} + +/** + * ufshcd_suspend - helper function for suspend operations + * @hba: per adapter instance + * + * This function will put disable irqs, turn off clocks + * and set vreg and hba-vreg in lpm mode. + */ +static int ufshcd_suspend(struct ufs_hba *hba) +{ + int ret; + + if (!hba->is_powered) + return 0; + /* + * Disable the host irq as host controller as there won't be any + * host controller transaction expected till resume. + */ + ufshcd_disable_irq(hba); + ret = ufshcd_setup_clocks(hba, false); + if (ret) { + ufshcd_enable_irq(hba); + return ret; + } + if (ufshcd_is_clkgating_allowed(hba)) { + hba->clk_gating.state = CLKS_OFF; + trace_ufshcd_clk_gating(dev_name(hba->dev), + hba->clk_gating.state); + } + + ufshcd_vreg_set_lpm(hba); + /* Put the host controller in low power mode if possible */ + ufshcd_hba_vreg_set_lpm(hba); + return ret; +} + +#ifdef CONFIG_PM +/** + * ufshcd_resume - helper function for resume operations + * @hba: per adapter instance + * + * This function basically turns on the regulators, clocks and + * irqs of the hba. + * + * Returns 0 for success and non-zero for failure + */ +static int ufshcd_resume(struct ufs_hba *hba) +{ + int ret; + + if (!hba->is_powered) + return 0; + + ufshcd_hba_vreg_set_hpm(hba); + ret = ufshcd_vreg_set_hpm(hba); + if (ret) + goto out; + + /* Make sure clocks are enabled before accessing controller */ + ret = ufshcd_setup_clocks(hba, true); + if (ret) + goto disable_vreg; + + /* enable the host irq as host controller would be active soon */ + ufshcd_enable_irq(hba); + goto out; + +disable_vreg: + ufshcd_vreg_set_lpm(hba); +out: + if (ret) + ufshcd_update_evt_hist(hba, UFS_EVT_RESUME_ERR, (u32)ret); + return ret; +} +#endif /* CONFIG_PM */ + +#ifdef CONFIG_PM_SLEEP +/** + * ufshcd_system_suspend - system suspend callback + * @dev: Device associated with the UFS controller. + * + * Executed before putting the system into a sleep state in which the contents + * of main memory are preserved. + * + * Returns 0 for success and non-zero for failure + */ +int ufshcd_system_suspend(struct device *dev) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + int ret = 0; + ktime_t start = ktime_get(); + + if (pm_runtime_suspended(hba->dev)) + goto out; + + ret = ufshcd_suspend(hba); +out: + trace_ufshcd_system_suspend(dev_name(hba->dev), ret, + ktime_to_us(ktime_sub(ktime_get(), start)), + hba->curr_dev_pwr_mode, hba->uic_link_state); + return ret; +} +EXPORT_SYMBOL(ufshcd_system_suspend); + +/** + * ufshcd_system_resume - system resume callback + * @dev: Device associated with the UFS controller. + * + * Executed after waking the system up from a sleep state in which the contents + * of main memory were preserved. + * + * Returns 0 for success and non-zero for failure + */ +int ufshcd_system_resume(struct device *dev) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + ktime_t start = ktime_get(); + int ret = 0; + + if (pm_runtime_suspended(hba->dev)) + goto out; + + ret = ufshcd_resume(hba); + +out: + trace_ufshcd_system_resume(dev_name(hba->dev), ret, + ktime_to_us(ktime_sub(ktime_get(), start)), + hba->curr_dev_pwr_mode, hba->uic_link_state); + + return ret; +} +EXPORT_SYMBOL(ufshcd_system_resume); +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_PM +/** + * ufshcd_runtime_suspend - runtime suspend callback + * @dev: Device associated with the UFS controller. + * + * Check the description of ufshcd_suspend() function for more details. + * + * Returns 0 for success and non-zero for failure + */ +int ufshcd_runtime_suspend(struct device *dev) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + int ret; + ktime_t start = ktime_get(); + + ret = ufshcd_suspend(hba); + + trace_ufshcd_runtime_suspend(dev_name(hba->dev), ret, + ktime_to_us(ktime_sub(ktime_get(), start)), + hba->curr_dev_pwr_mode, hba->uic_link_state); + return ret; +} +EXPORT_SYMBOL(ufshcd_runtime_suspend); + +/** + * ufshcd_runtime_resume - runtime resume routine + * @dev: Device associated with the UFS controller. + * + * This function basically brings controller + * to active state. Following operations are done in this function: + * + * 1. Turn on all the controller related clocks + * 2. Turn ON VCC rail + */ +int ufshcd_runtime_resume(struct device *dev) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + int ret; + ktime_t start = ktime_get(); + + ret = ufshcd_resume(hba); + + trace_ufshcd_runtime_resume(dev_name(hba->dev), ret, + ktime_to_us(ktime_sub(ktime_get(), start)), + hba->curr_dev_pwr_mode, hba->uic_link_state); + return ret; +} +EXPORT_SYMBOL(ufshcd_runtime_resume); +#endif /* CONFIG_PM */ + +/** + * ufshcd_shutdown - shutdown routine + * @hba: per adapter instance + * + * This function would turn off both UFS device and UFS hba + * regulators. It would also disable clocks. + * + * Returns 0 always to allow force shutdown even in case of errors. + */ +int ufshcd_shutdown(struct ufs_hba *hba) +{ + if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba)) + ufshcd_suspend(hba); + + hba->is_powered = false; + /* allow force shutdown even in case of errors */ + return 0; +} +EXPORT_SYMBOL(ufshcd_shutdown); + +/** + * ufshcd_remove - de-allocate SCSI host and host memory space + * data structure memory + * @hba: per adapter instance + */ +void ufshcd_remove(struct ufs_hba *hba) +{ + if (hba->ufs_device_wlun) + ufshcd_rpm_get_sync(hba); + ufs_hwmon_remove(hba); + ufs_bsg_remove(hba); + ufshpb_remove(hba); + ufs_sysfs_remove_nodes(hba->dev); + blk_mq_destroy_queue(hba->tmf_queue); + blk_mq_free_tag_set(&hba->tmf_tag_set); + scsi_remove_host(hba->host); + /* disable interrupts */ + ufshcd_disable_intr(hba, hba->intr_mask); + ufshcd_hba_stop(hba); + ufshcd_hba_exit(hba); +} +EXPORT_SYMBOL_GPL(ufshcd_remove); + +/** + * ufshcd_dealloc_host - deallocate Host Bus Adapter (HBA) + * @hba: pointer to Host Bus Adapter (HBA) + */ +void ufshcd_dealloc_host(struct ufs_hba *hba) +{ + scsi_host_put(hba->host); +} +EXPORT_SYMBOL_GPL(ufshcd_dealloc_host); + +/** + * ufshcd_set_dma_mask - Set dma mask based on the controller + * addressing capability + * @hba: per adapter instance + * + * Returns 0 for success, non-zero for failure + */ +static int ufshcd_set_dma_mask(struct ufs_hba *hba) +{ + if (hba->capabilities & MASK_64_ADDRESSING_SUPPORT) { + if (!dma_set_mask_and_coherent(hba->dev, DMA_BIT_MASK(64))) + return 0; + } + return dma_set_mask_and_coherent(hba->dev, DMA_BIT_MASK(32)); +} + +/** + * ufshcd_alloc_host - allocate Host Bus Adapter (HBA) + * @dev: pointer to device handle + * @hba_handle: driver private handle + * Returns 0 on success, non-zero value on failure + */ +int ufshcd_alloc_host(struct device *dev, struct ufs_hba **hba_handle) +{ + struct Scsi_Host *host; + struct ufs_hba *hba; + int err = 0; + + if (!dev) { + dev_err(dev, + "Invalid memory reference for dev is NULL\n"); + err = -ENODEV; + goto out_error; + } + + host = scsi_host_alloc(&ufshcd_driver_template, + sizeof(struct ufs_hba)); + if (!host) { + dev_err(dev, "scsi_host_alloc failed\n"); + err = -ENOMEM; + goto out_error; + } + host->nr_maps = HCTX_TYPE_POLL + 1; + hba = shost_priv(host); + hba->host = host; + hba->dev = dev; + hba->dev_ref_clk_freq = REF_CLK_FREQ_INVAL; + hba->nop_out_timeout = NOP_OUT_TIMEOUT; + INIT_LIST_HEAD(&hba->clk_list_head); + spin_lock_init(&hba->outstanding_lock); + + *hba_handle = hba; + +out_error: + return err; +} +EXPORT_SYMBOL(ufshcd_alloc_host); + +/* This function exists because blk_mq_alloc_tag_set() requires this. */ +static blk_status_t ufshcd_queue_tmf(struct blk_mq_hw_ctx *hctx, + const struct blk_mq_queue_data *qd) +{ + WARN_ON_ONCE(true); + return BLK_STS_NOTSUPP; +} + +static const struct blk_mq_ops ufshcd_tmf_ops = { + .queue_rq = ufshcd_queue_tmf, +}; + +/** + * ufshcd_init - Driver initialization routine + * @hba: per-adapter instance + * @mmio_base: base register address + * @irq: Interrupt line of device + * Returns 0 on success, non-zero value on failure + */ +int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) +{ + int err; + struct Scsi_Host *host = hba->host; + struct device *dev = hba->dev; + char eh_wq_name[sizeof("ufs_eh_wq_00")]; + + /* + * dev_set_drvdata() must be called before any callbacks are registered + * that use dev_get_drvdata() (frequency scaling, clock scaling, hwmon, + * sysfs). + */ + dev_set_drvdata(dev, hba); + + if (!mmio_base) { + dev_err(hba->dev, + "Invalid memory reference for mmio_base is NULL\n"); + err = -ENODEV; + goto out_error; + } + + hba->mmio_base = mmio_base; + hba->irq = irq; + hba->vps = &ufs_hba_vps; + + err = ufshcd_hba_init(hba); + if (err) + goto out_error; + + /* Read capabilities registers */ + err = ufshcd_hba_capabilities(hba); + if (err) + goto out_disable; + + /* Get UFS version supported by the controller */ + hba->ufs_version = ufshcd_get_ufs_version(hba); + + /* Get Interrupt bit mask per version */ + hba->intr_mask = ufshcd_get_intr_mask(hba); + + err = ufshcd_set_dma_mask(hba); + if (err) { + dev_err(hba->dev, "set dma mask failed\n"); + goto out_disable; + } + + /* Allocate memory for host memory space */ + err = ufshcd_memory_alloc(hba); + if (err) { + dev_err(hba->dev, "Memory allocation failed\n"); + goto out_disable; + } + + /* Configure LRB */ + ufshcd_host_memory_configure(hba); + + host->can_queue = hba->nutrs - UFSHCD_NUM_RESERVED; + host->cmd_per_lun = hba->nutrs - UFSHCD_NUM_RESERVED; + host->max_id = UFSHCD_MAX_ID; + host->max_lun = UFS_MAX_LUNS; + host->max_channel = UFSHCD_MAX_CHANNEL; + host->unique_id = host->host_no; + host->max_cmd_len = UFS_CDB_SIZE; + + hba->max_pwr_info.is_valid = false; + + /* Initialize work queues */ + snprintf(eh_wq_name, sizeof(eh_wq_name), "ufs_eh_wq_%d", + hba->host->host_no); + hba->eh_wq = create_singlethread_workqueue(eh_wq_name); + if (!hba->eh_wq) { + dev_err(hba->dev, "%s: failed to create eh workqueue\n", + __func__); + err = -ENOMEM; + goto out_disable; + } + INIT_WORK(&hba->eh_work, ufshcd_err_handler); + INIT_WORK(&hba->eeh_work, ufshcd_exception_event_handler); + + sema_init(&hba->host_sem, 1); + + /* Initialize UIC command mutex */ + mutex_init(&hba->uic_cmd_mutex); + + /* Initialize mutex for device management commands */ + mutex_init(&hba->dev_cmd.lock); + + /* Initialize mutex for exception event control */ + mutex_init(&hba->ee_ctrl_mutex); + + mutex_init(&hba->wb_mutex); + init_rwsem(&hba->clk_scaling_lock); + + ufshcd_init_clk_gating(hba); + + ufshcd_init_clk_scaling(hba); + + /* + * In order to avoid any spurious interrupt immediately after + * registering UFS controller interrupt handler, clear any pending UFS + * interrupt status and disable all the UFS interrupts. + */ + ufshcd_writel(hba, ufshcd_readl(hba, REG_INTERRUPT_STATUS), + REG_INTERRUPT_STATUS); + ufshcd_writel(hba, 0, REG_INTERRUPT_ENABLE); + /* + * Make sure that UFS interrupts are disabled and any pending interrupt + * status is cleared before registering UFS interrupt handler. + */ + mb(); + + /* IRQ registration */ + err = devm_request_irq(dev, irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba); + if (err) { + dev_err(hba->dev, "request irq failed\n"); + goto out_disable; + } else { + hba->is_irq_enabled = true; + } + + err = scsi_add_host(host, hba->dev); + if (err) { + dev_err(hba->dev, "scsi_add_host failed\n"); + goto out_disable; + } + + hba->tmf_tag_set = (struct blk_mq_tag_set) { + .nr_hw_queues = 1, + .queue_depth = hba->nutmrs, + .ops = &ufshcd_tmf_ops, + .flags = BLK_MQ_F_NO_SCHED, + }; + err = blk_mq_alloc_tag_set(&hba->tmf_tag_set); + if (err < 0) + goto out_remove_scsi_host; + hba->tmf_queue = blk_mq_init_queue(&hba->tmf_tag_set); + if (IS_ERR(hba->tmf_queue)) { + err = PTR_ERR(hba->tmf_queue); + goto free_tmf_tag_set; + } + hba->tmf_rqs = devm_kcalloc(hba->dev, hba->nutmrs, + sizeof(*hba->tmf_rqs), GFP_KERNEL); + if (!hba->tmf_rqs) { + err = -ENOMEM; + goto free_tmf_queue; + } + + /* Reset the attached device */ + ufshcd_device_reset(hba); + + ufshcd_init_crypto(hba); + + /* Host controller enable */ + err = ufshcd_hba_enable(hba); + if (err) { + dev_err(hba->dev, "Host controller enable failed\n"); + ufshcd_print_evt_hist(hba); + ufshcd_print_host_state(hba); + goto free_tmf_queue; + } + + /* + * Set the default power management level for runtime and system PM. + * Default power saving mode is to keep UFS link in Hibern8 state + * and UFS device in sleep state. + */ + hba->rpm_lvl = ufs_get_desired_pm_lvl_for_dev_link_state( + UFS_SLEEP_PWR_MODE, + UIC_LINK_HIBERN8_STATE); + hba->spm_lvl = ufs_get_desired_pm_lvl_for_dev_link_state( + UFS_SLEEP_PWR_MODE, + UIC_LINK_HIBERN8_STATE); + + INIT_DELAYED_WORK(&hba->rpm_dev_flush_recheck_work, + ufshcd_rpm_dev_flush_recheck_work); + + /* Set the default auto-hiberate idle timer value to 150 ms */ + if (ufshcd_is_auto_hibern8_supported(hba) && !hba->ahit) { + hba->ahit = FIELD_PREP(UFSHCI_AHIBERN8_TIMER_MASK, 150) | + FIELD_PREP(UFSHCI_AHIBERN8_SCALE_MASK, 3); + } + + /* Hold auto suspend until async scan completes */ + pm_runtime_get_sync(dev); + atomic_set(&hba->scsi_block_reqs_cnt, 0); + /* + * We are assuming that device wasn't put in sleep/power-down + * state exclusively during the boot stage before kernel. + * This assumption helps avoid doing link startup twice during + * ufshcd_probe_hba(). + */ + ufshcd_set_ufs_dev_active(hba); + + async_schedule(ufshcd_async_scan, hba); + ufs_sysfs_add_nodes(hba->dev); + + device_enable_async_suspend(dev); + return 0; + +free_tmf_queue: + blk_mq_destroy_queue(hba->tmf_queue); +free_tmf_tag_set: + blk_mq_free_tag_set(&hba->tmf_tag_set); +out_remove_scsi_host: + scsi_remove_host(hba->host); +out_disable: + hba->is_irq_enabled = false; + ufshcd_hba_exit(hba); +out_error: + return err; +} +EXPORT_SYMBOL_GPL(ufshcd_init); + +void ufshcd_resume_complete(struct device *dev) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + + if (hba->complete_put) { + ufshcd_rpm_put(hba); + hba->complete_put = false; + } +} +EXPORT_SYMBOL_GPL(ufshcd_resume_complete); + +static bool ufshcd_rpm_ok_for_spm(struct ufs_hba *hba) +{ + struct device *dev = &hba->ufs_device_wlun->sdev_gendev; + enum ufs_dev_pwr_mode dev_pwr_mode; + enum uic_link_state link_state; + unsigned long flags; + bool res; + + spin_lock_irqsave(&dev->power.lock, flags); + dev_pwr_mode = ufs_get_pm_lvl_to_dev_pwr_mode(hba->spm_lvl); + link_state = ufs_get_pm_lvl_to_link_pwr_state(hba->spm_lvl); + res = pm_runtime_suspended(dev) && + hba->curr_dev_pwr_mode == dev_pwr_mode && + hba->uic_link_state == link_state && + !hba->dev_info.b_rpm_dev_flush_capable; + spin_unlock_irqrestore(&dev->power.lock, flags); + + return res; +} + +int __ufshcd_suspend_prepare(struct device *dev, bool rpm_ok_for_spm) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + int ret; + + /* + * SCSI assumes that runtime-pm and system-pm for scsi drivers + * are same. And it doesn't wake up the device for system-suspend + * if it's runtime suspended. But ufs doesn't follow that. + * Refer ufshcd_resume_complete() + */ + if (hba->ufs_device_wlun) { + /* Prevent runtime suspend */ + ufshcd_rpm_get_noresume(hba); + /* + * Check if already runtime suspended in same state as system + * suspend would be. + */ + if (!rpm_ok_for_spm || !ufshcd_rpm_ok_for_spm(hba)) { + /* RPM state is not ok for SPM, so runtime resume */ + ret = ufshcd_rpm_resume(hba); + if (ret < 0 && ret != -EACCES) { + ufshcd_rpm_put(hba); + return ret; + } + } + hba->complete_put = true; + } + return 0; +} +EXPORT_SYMBOL_GPL(__ufshcd_suspend_prepare); + +int ufshcd_suspend_prepare(struct device *dev) +{ + return __ufshcd_suspend_prepare(dev, true); +} +EXPORT_SYMBOL_GPL(ufshcd_suspend_prepare); + +#ifdef CONFIG_PM_SLEEP +static int ufshcd_wl_poweroff(struct device *dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct ufs_hba *hba = shost_priv(sdev->host); + + __ufshcd_wl_suspend(hba, UFS_SHUTDOWN_PM); + return 0; +} +#endif + +static int ufshcd_wl_probe(struct device *dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + + if (!is_device_wlun(sdev)) + return -ENODEV; + + blk_pm_runtime_init(sdev->request_queue, dev); + pm_runtime_set_autosuspend_delay(dev, 0); + pm_runtime_allow(dev); + + return 0; +} + +static int ufshcd_wl_remove(struct device *dev) +{ + pm_runtime_forbid(dev); + return 0; +} + +static const struct dev_pm_ops ufshcd_wl_pm_ops = { +#ifdef CONFIG_PM_SLEEP + .suspend = ufshcd_wl_suspend, + .resume = ufshcd_wl_resume, + .freeze = ufshcd_wl_suspend, + .thaw = ufshcd_wl_resume, + .poweroff = ufshcd_wl_poweroff, + .restore = ufshcd_wl_resume, +#endif + SET_RUNTIME_PM_OPS(ufshcd_wl_runtime_suspend, ufshcd_wl_runtime_resume, NULL) +}; + +/* + * ufs_dev_wlun_template - describes ufs device wlun + * ufs-device wlun - used to send pm commands + * All luns are consumers of ufs-device wlun. + * + * Currently, no sd driver is present for wluns. + * Hence the no specific pm operations are performed. + * With ufs design, SSU should be sent to ufs-device wlun. + * Hence register a scsi driver for ufs wluns only. + */ +static struct scsi_driver ufs_dev_wlun_template = { + .gendrv = { + .name = "ufs_device_wlun", + .owner = THIS_MODULE, + .probe = ufshcd_wl_probe, + .remove = ufshcd_wl_remove, + .pm = &ufshcd_wl_pm_ops, + .shutdown = ufshcd_wl_shutdown, + }, +}; + +static int __init ufshcd_core_init(void) +{ + int ret; + + /* Verify that there are no gaps in struct utp_transfer_cmd_desc. */ + static_assert(sizeof(struct utp_transfer_cmd_desc) == + 2 * ALIGNED_UPIU_SIZE + + SG_ALL * sizeof(struct ufshcd_sg_entry)); + + ufs_debugfs_init(); + + ret = scsi_register_driver(&ufs_dev_wlun_template.gendrv); + if (ret) + ufs_debugfs_exit(); + return ret; +} + +static void __exit ufshcd_core_exit(void) +{ + ufs_debugfs_exit(); + scsi_unregister_driver(&ufs_dev_wlun_template.gendrv); +} + +module_init(ufshcd_core_init); +module_exit(ufshcd_core_exit); + +MODULE_AUTHOR("Santosh Yaragnavi "); +MODULE_AUTHOR("Vinayak Holikatti "); +MODULE_DESCRIPTION("Generic UFS host controller driver Core"); +MODULE_SOFTDEP("pre: governor_simpleondemand"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3