From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/usb/chipidea/usbmisc_imx.c | 1187 ++++++++++++++++++++++++++++++++++++ 1 file changed, 1187 insertions(+) create mode 100644 drivers/usb/chipidea/usbmisc_imx.c (limited to 'drivers/usb/chipidea/usbmisc_imx.c') diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c new file mode 100644 index 000000000..a2cb4f48c --- /dev/null +++ b/drivers/usb/chipidea/usbmisc_imx.c @@ -0,0 +1,1187 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + */ + +#include +#include +#include +#include +#include +#include + +#include "ci_hdrc_imx.h" + +#define MX25_USB_PHY_CTRL_OFFSET 0x08 +#define MX25_BM_EXTERNAL_VBUS_DIVIDER BIT(23) + +#define MX25_EHCI_INTERFACE_SINGLE_UNI (2 << 0) +#define MX25_EHCI_INTERFACE_DIFF_UNI (0 << 0) +#define MX25_EHCI_INTERFACE_MASK (0xf) + +#define MX25_OTG_SIC_SHIFT 29 +#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT) +#define MX25_OTG_PM_BIT BIT(24) +#define MX25_OTG_PP_BIT BIT(11) +#define MX25_OTG_OCPOL_BIT BIT(3) + +#define MX25_H1_SIC_SHIFT 21 +#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) +#define MX25_H1_PP_BIT BIT(18) +#define MX25_H1_PM_BIT BIT(16) +#define MX25_H1_IPPUE_UP_BIT BIT(7) +#define MX25_H1_IPPUE_DOWN_BIT BIT(6) +#define MX25_H1_TLL_BIT BIT(5) +#define MX25_H1_USBTE_BIT BIT(4) +#define MX25_H1_OCPOL_BIT BIT(2) + +#define MX27_H1_PM_BIT BIT(8) +#define MX27_H2_PM_BIT BIT(16) +#define MX27_OTG_PM_BIT BIT(24) + +#define MX53_USB_OTG_PHY_CTRL_0_OFFSET 0x08 +#define MX53_USB_OTG_PHY_CTRL_1_OFFSET 0x0c +#define MX53_USB_CTRL_1_OFFSET 0x10 +#define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK (0x11 << 2) +#define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI BIT(2) +#define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK (0x11 << 6) +#define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI BIT(6) +#define MX53_USB_UH2_CTRL_OFFSET 0x14 +#define MX53_USB_UH3_CTRL_OFFSET 0x18 +#define MX53_USB_CLKONOFF_CTRL_OFFSET 0x24 +#define MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF BIT(21) +#define MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF BIT(22) +#define MX53_BM_OVER_CUR_DIS_H1 BIT(5) +#define MX53_BM_OVER_CUR_DIS_OTG BIT(8) +#define MX53_BM_OVER_CUR_DIS_UHx BIT(30) +#define MX53_USB_CTRL_1_UH2_ULPI_EN BIT(26) +#define MX53_USB_CTRL_1_UH3_ULPI_EN BIT(27) +#define MX53_USB_UHx_CTRL_WAKE_UP_EN BIT(7) +#define MX53_USB_UHx_CTRL_ULPI_INT_EN BIT(8) +#define MX53_USB_PHYCTRL1_PLLDIV_MASK 0x3 +#define MX53_USB_PLL_DIV_24_MHZ 0x01 + +#define MX6_BM_NON_BURST_SETTING BIT(1) +#define MX6_BM_OVER_CUR_DIS BIT(7) +#define MX6_BM_OVER_CUR_POLARITY BIT(8) +#define MX6_BM_PWR_POLARITY BIT(9) +#define MX6_BM_WAKEUP_ENABLE BIT(10) +#define MX6_BM_UTMI_ON_CLOCK BIT(13) +#define MX6_BM_ID_WAKEUP BIT(16) +#define MX6_BM_VBUS_WAKEUP BIT(17) +#define MX6SX_BM_DPDM_WAKEUP_EN BIT(29) +#define MX6_BM_WAKEUP_INTR BIT(31) + +#define MX6_USB_HSIC_CTRL_OFFSET 0x10 +/* Send resume signal without 480Mhz PHY clock */ +#define MX6SX_BM_HSIC_AUTO_RESUME BIT(23) +/* set before portsc.suspendM = 1 */ +#define MX6_BM_HSIC_DEV_CONN BIT(21) +/* HSIC enable */ +#define MX6_BM_HSIC_EN BIT(12) +/* Force HSIC module 480M clock on, even when in Host is in suspend mode */ +#define MX6_BM_HSIC_CLK_ON BIT(11) + +#define MX6_USB_OTG1_PHY_CTRL 0x18 +/* For imx6dql, it is host-only controller, for later imx6, it is otg's */ +#define MX6_USB_OTG2_PHY_CTRL 0x1c +#define MX6SX_USB_VBUS_WAKEUP_SOURCE(v) (v << 8) +#define MX6SX_USB_VBUS_WAKEUP_SOURCE_VBUS MX6SX_USB_VBUS_WAKEUP_SOURCE(0) +#define MX6SX_USB_VBUS_WAKEUP_SOURCE_AVALID MX6SX_USB_VBUS_WAKEUP_SOURCE(1) +#define MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID MX6SX_USB_VBUS_WAKEUP_SOURCE(2) +#define MX6SX_USB_VBUS_WAKEUP_SOURCE_SESS_END MX6SX_USB_VBUS_WAKEUP_SOURCE(3) + +#define VF610_OVER_CUR_DIS BIT(7) + +#define MX7D_USBNC_USB_CTRL2 0x4 +#define MX7D_USB_VBUS_WAKEUP_SOURCE_MASK 0x3 +#define MX7D_USB_VBUS_WAKEUP_SOURCE(v) (v << 0) +#define MX7D_USB_VBUS_WAKEUP_SOURCE_VBUS MX7D_USB_VBUS_WAKEUP_SOURCE(0) +#define MX7D_USB_VBUS_WAKEUP_SOURCE_AVALID MX7D_USB_VBUS_WAKEUP_SOURCE(1) +#define MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID MX7D_USB_VBUS_WAKEUP_SOURCE(2) +#define MX7D_USB_VBUS_WAKEUP_SOURCE_SESS_END MX7D_USB_VBUS_WAKEUP_SOURCE(3) +#define MX7D_USBNC_AUTO_RESUME BIT(2) +/* The default DM/DP value is pull-down */ +#define MX7D_USBNC_USB_CTRL2_OPMODE(v) (v << 6) +#define MX7D_USBNC_USB_CTRL2_OPMODE_NON_DRIVING MX7D_USBNC_USB_CTRL2_OPMODE(1) +#define MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK (BIT(7) | BIT(6)) +#define MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN BIT(8) +#define MX7D_USBNC_USB_CTRL2_DP_OVERRIDE_VAL BIT(12) +#define MX7D_USBNC_USB_CTRL2_DP_OVERRIDE_EN BIT(13) +#define MX7D_USBNC_USB_CTRL2_DM_OVERRIDE_VAL BIT(14) +#define MX7D_USBNC_USB_CTRL2_DM_OVERRIDE_EN BIT(15) +#define MX7D_USBNC_USB_CTRL2_DP_DM_MASK (BIT(12) | BIT(13) | \ + BIT(14) | BIT(15)) + +#define MX7D_USB_OTG_PHY_CFG1 0x30 +#define MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL BIT(0) +#define MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0 BIT(1) +#define MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 BIT(2) +#define MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB BIT(3) +#define MX7D_USB_OTG_PHY_CFG2_DRVVBUS0 BIT(16) + +#define MX7D_USB_OTG_PHY_CFG2 0x34 + +#define MX7D_USB_OTG_PHY_STATUS 0x3c +#define MX7D_USB_OTG_PHY_STATUS_LINE_STATE0 BIT(0) +#define MX7D_USB_OTG_PHY_STATUS_LINE_STATE1 BIT(1) +#define MX7D_USB_OTG_PHY_STATUS_VBUS_VLD BIT(3) +#define MX7D_USB_OTG_PHY_STATUS_CHRGDET BIT(29) + +#define MX7D_USB_OTG_PHY_CFG1 0x30 +#define TXPREEMPAMPTUNE0_BIT 28 +#define TXPREEMPAMPTUNE0_MASK (3 << 28) +#define TXVREFTUNE0_BIT 20 +#define TXVREFTUNE0_MASK (0xf << 20) + +#define MX6_USB_OTG_WAKEUP_BITS (MX6_BM_WAKEUP_ENABLE | MX6_BM_VBUS_WAKEUP | \ + MX6_BM_ID_WAKEUP | MX6SX_BM_DPDM_WAKEUP_EN) + +struct usbmisc_ops { + /* It's called once when probe a usb device */ + int (*init)(struct imx_usbmisc_data *data); + /* It's called once after adding a usb device */ + int (*post)(struct imx_usbmisc_data *data); + /* It's called when we need to enable/disable usb wakeup */ + int (*set_wakeup)(struct imx_usbmisc_data *data, bool enabled); + /* It's called before setting portsc.suspendM */ + int (*hsic_set_connect)(struct imx_usbmisc_data *data); + /* It's called during suspend/resume */ + int (*hsic_set_clk)(struct imx_usbmisc_data *data, bool enabled); + /* usb charger detection */ + int (*charger_detection)(struct imx_usbmisc_data *data); +}; + +struct imx_usbmisc { + void __iomem *base; + spinlock_t lock; + const struct usbmisc_ops *ops; +}; + +static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data); + +static int usbmisc_imx25_init(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + unsigned long flags; + u32 val = 0; + + if (data->index > 1) + return -EINVAL; + + spin_lock_irqsave(&usbmisc->lock, flags); + switch (data->index) { + case 0: + val = readl(usbmisc->base); + val &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PP_BIT); + val |= (MX25_EHCI_INTERFACE_DIFF_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT; + val |= (MX25_OTG_PM_BIT | MX25_OTG_OCPOL_BIT); + + /* + * If the polarity is not configured assume active high for + * historical reasons. + */ + if (data->oc_pol_configured && data->oc_pol_active_low) + val &= ~MX25_OTG_OCPOL_BIT; + + writel(val, usbmisc->base); + break; + case 1: + val = readl(usbmisc->base); + val &= ~(MX25_H1_SIC_MASK | MX25_H1_PP_BIT | MX25_H1_IPPUE_UP_BIT); + val |= (MX25_EHCI_INTERFACE_SINGLE_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT; + val |= (MX25_H1_PM_BIT | MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | + MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT); + + /* + * If the polarity is not configured assume active high for + * historical reasons. + */ + if (data->oc_pol_configured && data->oc_pol_active_low) + val &= ~MX25_H1_OCPOL_BIT; + + writel(val, usbmisc->base); + + break; + } + spin_unlock_irqrestore(&usbmisc->lock, flags); + + return 0; +} + +static int usbmisc_imx25_post(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + void __iomem *reg; + unsigned long flags; + u32 val; + + if (data->index > 2) + return -EINVAL; + + if (data->index) + return 0; + + spin_lock_irqsave(&usbmisc->lock, flags); + reg = usbmisc->base + MX25_USB_PHY_CTRL_OFFSET; + val = readl(reg); + + if (data->evdo) + val |= MX25_BM_EXTERNAL_VBUS_DIVIDER; + else + val &= ~MX25_BM_EXTERNAL_VBUS_DIVIDER; + + writel(val, reg); + spin_unlock_irqrestore(&usbmisc->lock, flags); + usleep_range(5000, 10000); /* needed to stabilize voltage */ + + return 0; +} + +static int usbmisc_imx27_init(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + unsigned long flags; + u32 val; + + switch (data->index) { + case 0: + val = MX27_OTG_PM_BIT; + break; + case 1: + val = MX27_H1_PM_BIT; + break; + case 2: + val = MX27_H2_PM_BIT; + break; + default: + return -EINVAL; + } + + spin_lock_irqsave(&usbmisc->lock, flags); + if (data->disable_oc) + val = readl(usbmisc->base) | val; + else + val = readl(usbmisc->base) & ~val; + writel(val, usbmisc->base); + spin_unlock_irqrestore(&usbmisc->lock, flags); + + return 0; +} + +static int usbmisc_imx53_init(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + void __iomem *reg = NULL; + unsigned long flags; + u32 val = 0; + + if (data->index > 3) + return -EINVAL; + + /* Select a 24 MHz reference clock for the PHY */ + val = readl(usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET); + val &= ~MX53_USB_PHYCTRL1_PLLDIV_MASK; + val |= MX53_USB_PLL_DIV_24_MHZ; + writel(val, usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET); + + spin_lock_irqsave(&usbmisc->lock, flags); + + switch (data->index) { + case 0: + if (data->disable_oc) { + reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET; + val = readl(reg) | MX53_BM_OVER_CUR_DIS_OTG; + writel(val, reg); + } + break; + case 1: + if (data->disable_oc) { + reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET; + val = readl(reg) | MX53_BM_OVER_CUR_DIS_H1; + writel(val, reg); + } + break; + case 2: + if (data->ulpi) { + /* set USBH2 into ULPI-mode. */ + reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET; + val = readl(reg) | MX53_USB_CTRL_1_UH2_ULPI_EN; + /* select ULPI clock */ + val &= ~MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK; + val |= MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI; + writel(val, reg); + /* Set interrupt wake up enable */ + reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET; + val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN + | MX53_USB_UHx_CTRL_ULPI_INT_EN; + writel(val, reg); + if (is_imx53_usbmisc(data)) { + /* Disable internal 60Mhz clock */ + reg = usbmisc->base + + MX53_USB_CLKONOFF_CTRL_OFFSET; + val = readl(reg) | + MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF; + writel(val, reg); + } + + } + if (data->disable_oc) { + reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET; + val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx; + writel(val, reg); + } + break; + case 3: + if (data->ulpi) { + /* set USBH3 into ULPI-mode. */ + reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET; + val = readl(reg) | MX53_USB_CTRL_1_UH3_ULPI_EN; + /* select ULPI clock */ + val &= ~MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK; + val |= MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI; + writel(val, reg); + /* Set interrupt wake up enable */ + reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET; + val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN + | MX53_USB_UHx_CTRL_ULPI_INT_EN; + writel(val, reg); + + if (is_imx53_usbmisc(data)) { + /* Disable internal 60Mhz clock */ + reg = usbmisc->base + + MX53_USB_CLKONOFF_CTRL_OFFSET; + val = readl(reg) | + MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF; + writel(val, reg); + } + } + if (data->disable_oc) { + reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET; + val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx; + writel(val, reg); + } + break; + } + + spin_unlock_irqrestore(&usbmisc->lock, flags); + + return 0; +} + +static u32 usbmisc_wakeup_setting(struct imx_usbmisc_data *data) +{ + u32 wakeup_setting = MX6_USB_OTG_WAKEUP_BITS; + + if (data->ext_id || data->available_role != USB_DR_MODE_OTG) + wakeup_setting &= ~MX6_BM_ID_WAKEUP; + + if (data->ext_vbus || data->available_role == USB_DR_MODE_HOST) + wakeup_setting &= ~MX6_BM_VBUS_WAKEUP; + + return wakeup_setting; +} + +static int usbmisc_imx6q_set_wakeup + (struct imx_usbmisc_data *data, bool enabled) +{ + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + unsigned long flags; + u32 val; + int ret = 0; + + if (data->index > 3) + return -EINVAL; + + spin_lock_irqsave(&usbmisc->lock, flags); + val = readl(usbmisc->base + data->index * 4); + if (enabled) { + val &= ~MX6_USB_OTG_WAKEUP_BITS; + val |= usbmisc_wakeup_setting(data); + } else { + if (val & MX6_BM_WAKEUP_INTR) + pr_debug("wakeup int at ci_hdrc.%d\n", data->index); + val &= ~MX6_USB_OTG_WAKEUP_BITS; + } + writel(val, usbmisc->base + data->index * 4); + spin_unlock_irqrestore(&usbmisc->lock, flags); + + return ret; +} + +static int usbmisc_imx6q_init(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + unsigned long flags; + u32 reg; + + if (data->index > 3) + return -EINVAL; + + spin_lock_irqsave(&usbmisc->lock, flags); + + reg = readl(usbmisc->base + data->index * 4); + if (data->disable_oc) { + reg |= MX6_BM_OVER_CUR_DIS; + } else { + reg &= ~MX6_BM_OVER_CUR_DIS; + + /* + * If the polarity is not configured keep it as setup by the + * bootloader. + */ + if (data->oc_pol_configured && data->oc_pol_active_low) + reg |= MX6_BM_OVER_CUR_POLARITY; + else if (data->oc_pol_configured) + reg &= ~MX6_BM_OVER_CUR_POLARITY; + } + /* If the polarity is not set keep it as setup by the bootlader */ + if (data->pwr_pol == 1) + reg |= MX6_BM_PWR_POLARITY; + writel(reg, usbmisc->base + data->index * 4); + + /* SoC non-burst setting */ + reg = readl(usbmisc->base + data->index * 4); + writel(reg | MX6_BM_NON_BURST_SETTING, + usbmisc->base + data->index * 4); + + /* For HSIC controller */ + if (data->hsic) { + reg = readl(usbmisc->base + data->index * 4); + writel(reg | MX6_BM_UTMI_ON_CLOCK, + usbmisc->base + data->index * 4); + reg = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + + (data->index - 2) * 4); + reg |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON; + writel(reg, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + + (data->index - 2) * 4); + } + + spin_unlock_irqrestore(&usbmisc->lock, flags); + + usbmisc_imx6q_set_wakeup(data, false); + + return 0; +} + +static int usbmisc_imx6_hsic_get_reg_offset(struct imx_usbmisc_data *data) +{ + int offset, ret = 0; + + if (data->index == 2 || data->index == 3) { + offset = (data->index - 2) * 4; + } else if (data->index == 0) { + /* + * For SoCs like i.MX7D and later, each USB controller has + * its own non-core register region. For SoCs before i.MX7D, + * the first two USB controllers are non-HSIC controllers. + */ + offset = 0; + } else { + dev_err(data->dev, "index is error for usbmisc\n"); + ret = -EINVAL; + } + + return ret ? ret : offset; +} + +static int usbmisc_imx6_hsic_set_connect(struct imx_usbmisc_data *data) +{ + unsigned long flags; + u32 val; + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + int offset; + + spin_lock_irqsave(&usbmisc->lock, flags); + offset = usbmisc_imx6_hsic_get_reg_offset(data); + if (offset < 0) { + spin_unlock_irqrestore(&usbmisc->lock, flags); + return offset; + } + + val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); + if (!(val & MX6_BM_HSIC_DEV_CONN)) + writel(val | MX6_BM_HSIC_DEV_CONN, + usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); + + spin_unlock_irqrestore(&usbmisc->lock, flags); + + return 0; +} + +static int usbmisc_imx6_hsic_set_clk(struct imx_usbmisc_data *data, bool on) +{ + unsigned long flags; + u32 val; + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + int offset; + + spin_lock_irqsave(&usbmisc->lock, flags); + offset = usbmisc_imx6_hsic_get_reg_offset(data); + if (offset < 0) { + spin_unlock_irqrestore(&usbmisc->lock, flags); + return offset; + } + + val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); + val |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON; + if (on) + val |= MX6_BM_HSIC_CLK_ON; + else + val &= ~MX6_BM_HSIC_CLK_ON; + + writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset); + spin_unlock_irqrestore(&usbmisc->lock, flags); + + return 0; +} + + +static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data) +{ + void __iomem *reg = NULL; + unsigned long flags; + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + u32 val; + + usbmisc_imx6q_init(data); + + if (data->index == 0 || data->index == 1) { + reg = usbmisc->base + MX6_USB_OTG1_PHY_CTRL + data->index * 4; + spin_lock_irqsave(&usbmisc->lock, flags); + /* Set vbus wakeup source as bvalid */ + val = readl(reg); + writel(val | MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID, reg); + /* + * Disable dp/dm wakeup in device mode when vbus is + * not there. + */ + val = readl(usbmisc->base + data->index * 4); + writel(val & ~MX6SX_BM_DPDM_WAKEUP_EN, + usbmisc->base + data->index * 4); + spin_unlock_irqrestore(&usbmisc->lock, flags); + } + + /* For HSIC controller */ + if (data->hsic) { + val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET); + val |= MX6SX_BM_HSIC_AUTO_RESUME; + writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET); + } + + return 0; +} + +static int usbmisc_vf610_init(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + u32 reg; + + /* + * Vybrid only has one misc register set, but in two different + * areas. These is reflected in two instances of this driver. + */ + if (data->index >= 1) + return -EINVAL; + + if (data->disable_oc) { + reg = readl(usbmisc->base); + writel(reg | VF610_OVER_CUR_DIS, usbmisc->base); + } + + return 0; +} + +static int usbmisc_imx7d_set_wakeup + (struct imx_usbmisc_data *data, bool enabled) +{ + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + unsigned long flags; + u32 val; + + spin_lock_irqsave(&usbmisc->lock, flags); + val = readl(usbmisc->base); + if (enabled) { + val &= ~MX6_USB_OTG_WAKEUP_BITS; + val |= usbmisc_wakeup_setting(data); + writel(val, usbmisc->base); + } else { + if (val & MX6_BM_WAKEUP_INTR) + dev_dbg(data->dev, "wakeup int\n"); + writel(val & ~MX6_USB_OTG_WAKEUP_BITS, usbmisc->base); + } + spin_unlock_irqrestore(&usbmisc->lock, flags); + + return 0; +} + +static int usbmisc_imx7d_init(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + unsigned long flags; + u32 reg; + + if (data->index >= 1) + return -EINVAL; + + spin_lock_irqsave(&usbmisc->lock, flags); + reg = readl(usbmisc->base); + if (data->disable_oc) { + reg |= MX6_BM_OVER_CUR_DIS; + } else { + reg &= ~MX6_BM_OVER_CUR_DIS; + + /* + * If the polarity is not configured keep it as setup by the + * bootloader. + */ + if (data->oc_pol_configured && data->oc_pol_active_low) + reg |= MX6_BM_OVER_CUR_POLARITY; + else if (data->oc_pol_configured) + reg &= ~MX6_BM_OVER_CUR_POLARITY; + } + /* If the polarity is not set keep it as setup by the bootlader */ + if (data->pwr_pol == 1) + reg |= MX6_BM_PWR_POLARITY; + writel(reg, usbmisc->base); + + /* SoC non-burst setting */ + reg = readl(usbmisc->base); + writel(reg | MX6_BM_NON_BURST_SETTING, usbmisc->base); + + if (!data->hsic) { + reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2); + reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK; + writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID + | MX7D_USBNC_AUTO_RESUME, + usbmisc->base + MX7D_USBNC_USB_CTRL2); + /* PHY tuning for signal quality */ + reg = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG1); + if (data->emp_curr_control >= 0 && + data->emp_curr_control <= + (TXPREEMPAMPTUNE0_MASK >> TXPREEMPAMPTUNE0_BIT)) { + reg &= ~TXPREEMPAMPTUNE0_MASK; + reg |= (data->emp_curr_control << TXPREEMPAMPTUNE0_BIT); + } + + if (data->dc_vol_level_adjust >= 0 && + data->dc_vol_level_adjust <= + (TXVREFTUNE0_MASK >> TXVREFTUNE0_BIT)) { + reg &= ~TXVREFTUNE0_MASK; + reg |= (data->dc_vol_level_adjust << TXVREFTUNE0_BIT); + } + + writel(reg, usbmisc->base + MX7D_USB_OTG_PHY_CFG1); + } + + spin_unlock_irqrestore(&usbmisc->lock, flags); + + usbmisc_imx7d_set_wakeup(data, false); + + return 0; +} + +static int imx7d_charger_secondary_detection(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + struct usb_phy *usb_phy = data->usb_phy; + int val; + unsigned long flags; + + /* Clear VDATSRCENB0 to disable VDP_SRC and IDM_SNK required by BC 1.2 spec */ + spin_lock_irqsave(&usbmisc->lock, flags); + val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2); + val &= ~MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0; + writel(val, usbmisc->base + MX7D_USB_OTG_PHY_CFG2); + spin_unlock_irqrestore(&usbmisc->lock, flags); + + /* TVDMSRC_DIS */ + msleep(20); + + /* VDM_SRC is connected to D- and IDP_SINK is connected to D+ */ + spin_lock_irqsave(&usbmisc->lock, flags); + val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2); + writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 | + MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0 | + MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL, + usbmisc->base + MX7D_USB_OTG_PHY_CFG2); + spin_unlock_irqrestore(&usbmisc->lock, flags); + + /* TVDMSRC_ON */ + msleep(40); + + /* + * Per BC 1.2, check voltage of D+: + * DCP: if greater than VDAT_REF; + * CDP: if less than VDAT_REF. + */ + val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS); + if (val & MX7D_USB_OTG_PHY_STATUS_CHRGDET) { + dev_dbg(data->dev, "It is a dedicate charging port\n"); + usb_phy->chg_type = DCP_TYPE; + } else { + dev_dbg(data->dev, "It is a charging downstream port\n"); + usb_phy->chg_type = CDP_TYPE; + } + + return 0; +} + +static void imx7_disable_charger_detector(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + unsigned long flags; + u32 val; + + spin_lock_irqsave(&usbmisc->lock, flags); + val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2); + val &= ~(MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB | + MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 | + MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0 | + MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL); + writel(val, usbmisc->base + MX7D_USB_OTG_PHY_CFG2); + + /* Set OPMODE to be 2'b00 and disable its override */ + val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2); + val &= ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK; + writel(val, usbmisc->base + MX7D_USBNC_USB_CTRL2); + + val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2); + writel(val & ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN, + usbmisc->base + MX7D_USBNC_USB_CTRL2); + spin_unlock_irqrestore(&usbmisc->lock, flags); +} + +static int imx7d_charger_data_contact_detect(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + unsigned long flags; + u32 val; + int i, data_pin_contact_count = 0; + + /* Enable Data Contact Detect (DCD) per the USB BC 1.2 */ + spin_lock_irqsave(&usbmisc->lock, flags); + val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2); + writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB, + usbmisc->base + MX7D_USB_OTG_PHY_CFG2); + spin_unlock_irqrestore(&usbmisc->lock, flags); + + for (i = 0; i < 100; i = i + 1) { + val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS); + if (!(val & MX7D_USB_OTG_PHY_STATUS_LINE_STATE0)) { + if (data_pin_contact_count++ > 5) + /* Data pin makes contact */ + break; + usleep_range(5000, 10000); + } else { + data_pin_contact_count = 0; + usleep_range(5000, 6000); + } + } + + /* Disable DCD after finished data contact check */ + spin_lock_irqsave(&usbmisc->lock, flags); + val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2); + writel(val & ~MX7D_USB_OTG_PHY_CFG2_CHRG_DCDENB, + usbmisc->base + MX7D_USB_OTG_PHY_CFG2); + spin_unlock_irqrestore(&usbmisc->lock, flags); + + if (i == 100) { + dev_err(data->dev, + "VBUS is coming from a dedicated power supply.\n"); + return -ENXIO; + } + + return 0; +} + +static int imx7d_charger_primary_detection(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + struct usb_phy *usb_phy = data->usb_phy; + unsigned long flags; + u32 val; + + /* VDP_SRC is connected to D+ and IDM_SINK is connected to D- */ + spin_lock_irqsave(&usbmisc->lock, flags); + val = readl(usbmisc->base + MX7D_USB_OTG_PHY_CFG2); + val &= ~MX7D_USB_OTG_PHY_CFG2_CHRG_CHRGSEL; + writel(val | MX7D_USB_OTG_PHY_CFG2_CHRG_VDATSRCENB0 | + MX7D_USB_OTG_PHY_CFG2_CHRG_VDATDETENB0, + usbmisc->base + MX7D_USB_OTG_PHY_CFG2); + spin_unlock_irqrestore(&usbmisc->lock, flags); + + /* TVDPSRC_ON */ + msleep(40); + + /* Check if D- is less than VDAT_REF to determine an SDP per BC 1.2 */ + val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS); + if (!(val & MX7D_USB_OTG_PHY_STATUS_CHRGDET)) { + dev_dbg(data->dev, "It is a standard downstream port\n"); + usb_phy->chg_type = SDP_TYPE; + } + + return 0; +} + +/* + * Whole charger detection process: + * 1. OPMODE override to be non-driving + * 2. Data contact check + * 3. Primary detection + * 4. Secondary detection + * 5. Disable charger detection + */ +static int imx7d_charger_detection(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + struct usb_phy *usb_phy = data->usb_phy; + unsigned long flags; + u32 val; + int ret; + + /* Check if vbus is valid */ + val = readl(usbmisc->base + MX7D_USB_OTG_PHY_STATUS); + if (!(val & MX7D_USB_OTG_PHY_STATUS_VBUS_VLD)) { + dev_err(data->dev, "vbus is error\n"); + return -EINVAL; + } + + /* + * Keep OPMODE to be non-driving mode during the whole + * charger detection process. + */ + spin_lock_irqsave(&usbmisc->lock, flags); + val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2); + val &= ~MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_MASK; + val |= MX7D_USBNC_USB_CTRL2_OPMODE_NON_DRIVING; + writel(val, usbmisc->base + MX7D_USBNC_USB_CTRL2); + + val = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2); + writel(val | MX7D_USBNC_USB_CTRL2_OPMODE_OVERRIDE_EN, + usbmisc->base + MX7D_USBNC_USB_CTRL2); + spin_unlock_irqrestore(&usbmisc->lock, flags); + + ret = imx7d_charger_data_contact_detect(data); + if (ret) + return ret; + + ret = imx7d_charger_primary_detection(data); + if (!ret && usb_phy->chg_type != SDP_TYPE) + ret = imx7d_charger_secondary_detection(data); + + imx7_disable_charger_detector(data); + + return ret; +} + +static int usbmisc_imx7ulp_init(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + unsigned long flags; + u32 reg; + + if (data->index >= 1) + return -EINVAL; + + spin_lock_irqsave(&usbmisc->lock, flags); + reg = readl(usbmisc->base); + if (data->disable_oc) { + reg |= MX6_BM_OVER_CUR_DIS; + } else { + reg &= ~MX6_BM_OVER_CUR_DIS; + + /* + * If the polarity is not configured keep it as setup by the + * bootloader. + */ + if (data->oc_pol_configured && data->oc_pol_active_low) + reg |= MX6_BM_OVER_CUR_POLARITY; + else if (data->oc_pol_configured) + reg &= ~MX6_BM_OVER_CUR_POLARITY; + } + /* If the polarity is not set keep it as setup by the bootlader */ + if (data->pwr_pol == 1) + reg |= MX6_BM_PWR_POLARITY; + + writel(reg, usbmisc->base); + + /* SoC non-burst setting */ + reg = readl(usbmisc->base); + writel(reg | MX6_BM_NON_BURST_SETTING, usbmisc->base); + + if (data->hsic) { + reg = readl(usbmisc->base); + writel(reg | MX6_BM_UTMI_ON_CLOCK, usbmisc->base); + + reg = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET); + reg |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON; + writel(reg, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET); + + /* + * For non-HSIC controller, the autoresume is enabled + * at MXS PHY driver (usbphy_ctrl bit18). + */ + reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2); + writel(reg | MX7D_USBNC_AUTO_RESUME, + usbmisc->base + MX7D_USBNC_USB_CTRL2); + } else { + reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2); + reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK; + writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID, + usbmisc->base + MX7D_USBNC_USB_CTRL2); + } + + spin_unlock_irqrestore(&usbmisc->lock, flags); + + usbmisc_imx7d_set_wakeup(data, false); + + return 0; +} + +static const struct usbmisc_ops imx25_usbmisc_ops = { + .init = usbmisc_imx25_init, + .post = usbmisc_imx25_post, +}; + +static const struct usbmisc_ops imx27_usbmisc_ops = { + .init = usbmisc_imx27_init, +}; + +static const struct usbmisc_ops imx51_usbmisc_ops = { + .init = usbmisc_imx53_init, +}; + +static const struct usbmisc_ops imx53_usbmisc_ops = { + .init = usbmisc_imx53_init, +}; + +static const struct usbmisc_ops imx6q_usbmisc_ops = { + .set_wakeup = usbmisc_imx6q_set_wakeup, + .init = usbmisc_imx6q_init, + .hsic_set_connect = usbmisc_imx6_hsic_set_connect, + .hsic_set_clk = usbmisc_imx6_hsic_set_clk, +}; + +static const struct usbmisc_ops vf610_usbmisc_ops = { + .init = usbmisc_vf610_init, +}; + +static const struct usbmisc_ops imx6sx_usbmisc_ops = { + .set_wakeup = usbmisc_imx6q_set_wakeup, + .init = usbmisc_imx6sx_init, + .hsic_set_connect = usbmisc_imx6_hsic_set_connect, + .hsic_set_clk = usbmisc_imx6_hsic_set_clk, +}; + +static const struct usbmisc_ops imx7d_usbmisc_ops = { + .init = usbmisc_imx7d_init, + .set_wakeup = usbmisc_imx7d_set_wakeup, + .charger_detection = imx7d_charger_detection, +}; + +static const struct usbmisc_ops imx7ulp_usbmisc_ops = { + .init = usbmisc_imx7ulp_init, + .set_wakeup = usbmisc_imx7d_set_wakeup, + .hsic_set_connect = usbmisc_imx6_hsic_set_connect, + .hsic_set_clk = usbmisc_imx6_hsic_set_clk, +}; + +static inline bool is_imx53_usbmisc(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev); + + return usbmisc->ops == &imx53_usbmisc_ops; +} + +int imx_usbmisc_init(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc; + + if (!data) + return 0; + + usbmisc = dev_get_drvdata(data->dev); + if (!usbmisc->ops->init) + return 0; + return usbmisc->ops->init(data); +} +EXPORT_SYMBOL_GPL(imx_usbmisc_init); + +int imx_usbmisc_init_post(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc; + + if (!data) + return 0; + + usbmisc = dev_get_drvdata(data->dev); + if (!usbmisc->ops->post) + return 0; + return usbmisc->ops->post(data); +} +EXPORT_SYMBOL_GPL(imx_usbmisc_init_post); + +int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled) +{ + struct imx_usbmisc *usbmisc; + + if (!data) + return 0; + + usbmisc = dev_get_drvdata(data->dev); + if (!usbmisc->ops->set_wakeup) + return 0; + return usbmisc->ops->set_wakeup(data, enabled); +} +EXPORT_SYMBOL_GPL(imx_usbmisc_set_wakeup); + +int imx_usbmisc_hsic_set_connect(struct imx_usbmisc_data *data) +{ + struct imx_usbmisc *usbmisc; + + if (!data) + return 0; + + usbmisc = dev_get_drvdata(data->dev); + if (!usbmisc->ops->hsic_set_connect || !data->hsic) + return 0; + return usbmisc->ops->hsic_set_connect(data); +} +EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_connect); + +int imx_usbmisc_hsic_set_clk(struct imx_usbmisc_data *data, bool on) +{ + struct imx_usbmisc *usbmisc; + + if (!data) + return 0; + + usbmisc = dev_get_drvdata(data->dev); + if (!usbmisc->ops->hsic_set_clk || !data->hsic) + return 0; + return usbmisc->ops->hsic_set_clk(data, on); +} +EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_clk); + +int imx_usbmisc_charger_detection(struct imx_usbmisc_data *data, bool connect) +{ + struct imx_usbmisc *usbmisc; + struct usb_phy *usb_phy; + int ret = 0; + + if (!data) + return -EINVAL; + + usbmisc = dev_get_drvdata(data->dev); + usb_phy = data->usb_phy; + if (!usbmisc->ops->charger_detection) + return -ENOTSUPP; + + if (connect) { + ret = usbmisc->ops->charger_detection(data); + if (ret) { + dev_err(data->dev, + "Error occurs during detection: %d\n", + ret); + usb_phy->chg_state = USB_CHARGER_ABSENT; + } else { + usb_phy->chg_state = USB_CHARGER_PRESENT; + } + } else { + usb_phy->chg_state = USB_CHARGER_ABSENT; + usb_phy->chg_type = UNKNOWN_TYPE; + } + return ret; +} +EXPORT_SYMBOL_GPL(imx_usbmisc_charger_detection); + +static const struct of_device_id usbmisc_imx_dt_ids[] = { + { + .compatible = "fsl,imx25-usbmisc", + .data = &imx25_usbmisc_ops, + }, + { + .compatible = "fsl,imx35-usbmisc", + .data = &imx25_usbmisc_ops, + }, + { + .compatible = "fsl,imx27-usbmisc", + .data = &imx27_usbmisc_ops, + }, + { + .compatible = "fsl,imx51-usbmisc", + .data = &imx51_usbmisc_ops, + }, + { + .compatible = "fsl,imx53-usbmisc", + .data = &imx53_usbmisc_ops, + }, + { + .compatible = "fsl,imx6q-usbmisc", + .data = &imx6q_usbmisc_ops, + }, + { + .compatible = "fsl,vf610-usbmisc", + .data = &vf610_usbmisc_ops, + }, + { + .compatible = "fsl,imx6sx-usbmisc", + .data = &imx6sx_usbmisc_ops, + }, + { + .compatible = "fsl,imx6ul-usbmisc", + .data = &imx6sx_usbmisc_ops, + }, + { + .compatible = "fsl,imx7d-usbmisc", + .data = &imx7d_usbmisc_ops, + }, + { + .compatible = "fsl,imx7ulp-usbmisc", + .data = &imx7ulp_usbmisc_ops, + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids); + +static int usbmisc_imx_probe(struct platform_device *pdev) +{ + struct imx_usbmisc *data; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + spin_lock_init(&data->lock); + + data->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(data->base)) + return PTR_ERR(data->base); + + data->ops = of_device_get_match_data(&pdev->dev); + platform_set_drvdata(pdev, data); + + return 0; +} + +static int usbmisc_imx_remove(struct platform_device *pdev) +{ + return 0; +} + +static struct platform_driver usbmisc_imx_driver = { + .probe = usbmisc_imx_probe, + .remove = usbmisc_imx_remove, + .driver = { + .name = "usbmisc_imx", + .of_match_table = usbmisc_imx_dt_ids, + }, +}; + +module_platform_driver(usbmisc_imx_driver); + +MODULE_ALIAS("platform:usbmisc-imx"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("driver for imx usb non-core registers"); +MODULE_AUTHOR("Richard Zhao "); -- cgit v1.2.3