From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/usb/host/ohci-at91.c | 732 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 732 insertions(+) create mode 100644 drivers/usb/host/ohci-at91.c (limited to 'drivers/usb/host/ohci-at91.c') diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c new file mode 100644 index 000000000..360680769 --- /dev/null +++ b/drivers/usb/host/ohci-at91.c @@ -0,0 +1,732 @@ +// SPDX-License-Identifier: GPL-1.0+ +/* + * OHCI HCD (Host Controller Driver) for USB. + * + * Copyright (C) 2004 SAN People (Pty) Ltd. + * Copyright (C) 2005 Thibaut VARENE + * + * AT91 Bus Glue + * + * Based on fragments of 2.4 driver by Rick Bronson. + * Based on ohci-omap.c + * + * This file is licenced under the GPL. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ohci.h" + +#define valid_port(index) ((index) >= 0 && (index) < AT91_MAX_USBH_PORTS) +#define at91_for_each_port(index) \ + for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++) + +/* interface, function and usb clocks; sometimes also an AHB clock */ +#define hcd_to_ohci_at91_priv(h) \ + ((struct ohci_at91_priv *)hcd_to_ohci(h)->priv) + +#define AT91_MAX_USBH_PORTS 3 +struct at91_usbh_data { + struct gpio_desc *vbus_pin[AT91_MAX_USBH_PORTS]; + struct gpio_desc *overcurrent_pin[AT91_MAX_USBH_PORTS]; + u8 ports; /* number of ports on root hub */ + u8 overcurrent_supported; + u8 overcurrent_status[AT91_MAX_USBH_PORTS]; + u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; +}; + +struct ohci_at91_priv { + struct clk *iclk; + struct clk *fclk; + struct clk *hclk; + bool clocked; + bool wakeup; /* Saved wake-up state for resume */ + struct regmap *sfr_regmap; + u32 suspend_smc_id; +}; +/* interface and function clocks; sometimes also an AHB clock */ + +#define DRIVER_DESC "OHCI Atmel driver" + +static struct hc_driver __read_mostly ohci_at91_hc_driver; + +static const struct ohci_driver_overrides ohci_at91_drv_overrides __initconst = { + .extra_priv_size = sizeof(struct ohci_at91_priv), +}; + +/*-------------------------------------------------------------------------*/ + +static void at91_start_clock(struct ohci_at91_priv *ohci_at91) +{ + if (ohci_at91->clocked) + return; + + clk_set_rate(ohci_at91->fclk, 48000000); + clk_prepare_enable(ohci_at91->hclk); + clk_prepare_enable(ohci_at91->iclk); + clk_prepare_enable(ohci_at91->fclk); + ohci_at91->clocked = true; +} + +static void at91_stop_clock(struct ohci_at91_priv *ohci_at91) +{ + if (!ohci_at91->clocked) + return; + + clk_disable_unprepare(ohci_at91->fclk); + clk_disable_unprepare(ohci_at91->iclk); + clk_disable_unprepare(ohci_at91->hclk); + ohci_at91->clocked = false; +} + +static void at91_start_hc(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_regs __iomem *regs = hcd->regs; + struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd); + + dev_dbg(&pdev->dev, "start\n"); + + /* + * Start the USB clocks. + */ + at91_start_clock(ohci_at91); + + /* + * The USB host controller must remain in reset. + */ + writel(0, ®s->control); +} + +static void at91_stop_hc(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd); + + dev_dbg(&pdev->dev, "stop\n"); + + /* + * Put the USB host controller into reset. + */ + usb_hcd_platform_shutdown(pdev); + + /* + * Stop the USB clocks. + */ + at91_stop_clock(ohci_at91); +} + + +/*-------------------------------------------------------------------------*/ + +static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *); + +static u32 at91_dt_suspend_smc(struct device *dev) +{ + u32 suspend_smc_id; + + if (!dev->of_node) + return 0; + + if (of_property_read_u32(dev->of_node, "microchip,suspend-smc-id", &suspend_smc_id)) + return 0; + + return suspend_smc_id; +} + +static struct regmap *at91_dt_syscon_sfr(void) +{ + struct regmap *regmap; + + regmap = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr"); + if (IS_ERR(regmap)) { + regmap = syscon_regmap_lookup_by_compatible("microchip,sam9x60-sfr"); + if (IS_ERR(regmap)) + regmap = NULL; + } + + return regmap; +} + +/* configure so an HC device and id are always provided */ +/* always called with process context; sleeping is OK */ + + +/* + * usb_hcd_at91_probe - initialize AT91-based HCDs + * @driver: Pointer to hc driver instance + * @pdev: USB controller to probe + * + * Context: task context, might sleep + * + * Allocates basic resources for this USB host controller, and + * then invokes the start() method for the HCD associated with it + * through the hotplug entry's driver_data. + */ +static int usb_hcd_at91_probe(const struct hc_driver *driver, + struct platform_device *pdev) +{ + struct at91_usbh_data *board; + struct ohci_hcd *ohci; + int retval; + struct usb_hcd *hcd; + struct ohci_at91_priv *ohci_at91; + struct device *dev = &pdev->dev; + struct resource *res; + int irq; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_dbg(dev, "hcd probe: missing irq resource\n"); + return irq; + } + + hcd = usb_create_hcd(driver, dev, "at91"); + if (!hcd) + return -ENOMEM; + ohci_at91 = hcd_to_ohci_at91_priv(hcd); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hcd->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(hcd->regs)) { + retval = PTR_ERR(hcd->regs); + goto err; + } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + + ohci_at91->iclk = devm_clk_get(dev, "ohci_clk"); + if (IS_ERR(ohci_at91->iclk)) { + dev_err(dev, "failed to get ohci_clk\n"); + retval = PTR_ERR(ohci_at91->iclk); + goto err; + } + ohci_at91->fclk = devm_clk_get(dev, "uhpck"); + if (IS_ERR(ohci_at91->fclk)) { + dev_err(dev, "failed to get uhpck\n"); + retval = PTR_ERR(ohci_at91->fclk); + goto err; + } + ohci_at91->hclk = devm_clk_get(dev, "hclk"); + if (IS_ERR(ohci_at91->hclk)) { + dev_err(dev, "failed to get hclk\n"); + retval = PTR_ERR(ohci_at91->hclk); + goto err; + } + + ohci_at91->suspend_smc_id = at91_dt_suspend_smc(dev); + if (!ohci_at91->suspend_smc_id) { + dev_dbg(dev, "failed to find sfr suspend smc id, using regmap\n"); + ohci_at91->sfr_regmap = at91_dt_syscon_sfr(); + if (!ohci_at91->sfr_regmap) + dev_dbg(dev, "failed to find sfr node\n"); + } + + board = hcd->self.controller->platform_data; + ohci = hcd_to_ohci(hcd); + ohci->num_ports = board->ports; + at91_start_hc(pdev); + + /* + * The RemoteWakeupConnected bit has to be set explicitly + * before calling ohci_run. The reset value of this bit is 0. + */ + ohci->hc_control = OHCI_CTRL_RWC; + + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (retval == 0) { + device_wakeup_enable(hcd->self.controller); + return retval; + } + + /* Error handling */ + at91_stop_hc(pdev); + + err: + usb_put_hcd(hcd); + return retval; +} + + +/* may be called with controller, bus, and devices active */ + +/* + * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs + * @hcd: USB controller to remove + * @pdev: Platform device required for cleanup + * + * Context: task context, might sleep + * + * Reverses the effect of usb_hcd_at91_probe(), first invoking + * the HCD's stop() method. It is always called from a thread + * context, "rmmod" or something similar. + */ +static void usb_hcd_at91_remove(struct usb_hcd *hcd, + struct platform_device *pdev) +{ + usb_remove_hcd(hcd); + at91_stop_hc(pdev); + usb_put_hcd(hcd); +} + +/*-------------------------------------------------------------------------*/ +static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable) +{ + if (!valid_port(port)) + return; + + gpiod_set_value(pdata->vbus_pin[port], enable); +} + +static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) +{ + if (!valid_port(port)) + return -EINVAL; + + return gpiod_get_value(pdata->vbus_pin[port]); +} + +/* + * Update the status data from the hub with the over-current indicator change. + */ +static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct at91_usbh_data *pdata = hcd->self.controller->platform_data; + int length = ohci_hub_status_data(hcd, buf); + int port; + + at91_for_each_port(port) { + if (pdata->overcurrent_changed[port]) { + if (!length) + length = 1; + buf[0] |= 1 << (port + 1); + } + } + + return length; +} + +static int ohci_at91_port_suspend(struct ohci_at91_priv *ohci_at91, u8 set) +{ + struct regmap *regmap = ohci_at91->sfr_regmap; + u32 regval; + int ret; + + if (ohci_at91->suspend_smc_id) { + struct arm_smccc_res res; + + arm_smccc_smc(ohci_at91->suspend_smc_id, set, 0, 0, 0, 0, 0, 0, &res); + if (res.a0) + return -EINVAL; + } else if (regmap) { + ret = regmap_read(regmap, AT91_SFR_OHCIICR, ®val); + if (ret) + return ret; + + if (set) + regval |= AT91_OHCIICR_USB_SUSPEND; + else + regval &= ~AT91_OHCIICR_USB_SUSPEND; + + regmap_write(regmap, AT91_SFR_OHCIICR, regval); + } + + return 0; +} + +/* + * Look at the control requests to the root hub and see if we need to override. + */ +static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct at91_usbh_data *pdata = dev_get_platdata(hcd->self.controller); + struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd); + struct usb_hub_descriptor *desc; + int ret = -EINVAL; + u32 *data = (u32 *)buf; + + dev_dbg(hcd->self.controller, + "ohci_at91_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n", + hcd, typeReq, wValue, wIndex, buf, wLength); + + wIndex--; + + switch (typeReq) { + case SetPortFeature: + switch (wValue) { + case USB_PORT_FEAT_POWER: + dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n"); + if (valid_port(wIndex)) { + ohci_at91_usb_set_power(pdata, wIndex, 1); + ret = 0; + } + + goto out; + + case USB_PORT_FEAT_SUSPEND: + dev_dbg(hcd->self.controller, "SetPortFeat: SUSPEND\n"); + if (valid_port(wIndex)) { + ohci_at91_port_suspend(ohci_at91, 1); + return 0; + } + break; + } + break; + + case ClearPortFeature: + switch (wValue) { + case USB_PORT_FEAT_C_OVER_CURRENT: + dev_dbg(hcd->self.controller, + "ClearPortFeature: C_OVER_CURRENT\n"); + + if (valid_port(wIndex)) { + pdata->overcurrent_changed[wIndex] = 0; + pdata->overcurrent_status[wIndex] = 0; + } + + goto out; + + case USB_PORT_FEAT_OVER_CURRENT: + dev_dbg(hcd->self.controller, + "ClearPortFeature: OVER_CURRENT\n"); + + if (valid_port(wIndex)) + pdata->overcurrent_status[wIndex] = 0; + + goto out; + + case USB_PORT_FEAT_POWER: + dev_dbg(hcd->self.controller, + "ClearPortFeature: POWER\n"); + + if (valid_port(wIndex)) { + ohci_at91_usb_set_power(pdata, wIndex, 0); + return 0; + } + break; + + case USB_PORT_FEAT_SUSPEND: + dev_dbg(hcd->self.controller, "ClearPortFeature: SUSPEND\n"); + if (valid_port(wIndex)) { + ohci_at91_port_suspend(ohci_at91, 0); + return 0; + } + break; + } + break; + } + + ret = ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, buf, wLength); + if (ret) + goto out; + + switch (typeReq) { + case GetHubDescriptor: + + /* update the hub's descriptor */ + + desc = (struct usb_hub_descriptor *)buf; + + dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n", + desc->wHubCharacteristics); + + /* remove the old configurations for power-switching, and + * over-current protection, and insert our new configuration + */ + + desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM); + desc->wHubCharacteristics |= + cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM); + + if (pdata->overcurrent_supported) { + desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM); + desc->wHubCharacteristics |= + cpu_to_le16(HUB_CHAR_INDV_PORT_OCPM); + } + + dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n", + desc->wHubCharacteristics); + + return ret; + + case GetPortStatus: + /* check port status */ + + dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex); + + if (valid_port(wIndex)) { + if (!ohci_at91_usb_get_power(pdata, wIndex)) + *data &= ~cpu_to_le32(RH_PS_PPS); + + if (pdata->overcurrent_changed[wIndex]) + *data |= cpu_to_le32(RH_PS_OCIC); + + if (pdata->overcurrent_status[wIndex]) + *data |= cpu_to_le32(RH_PS_POCI); + } + } + + out: + return ret; +} + +/*-------------------------------------------------------------------------*/ + +static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data) +{ + struct platform_device *pdev = data; + struct at91_usbh_data *pdata = dev_get_platdata(&pdev->dev); + int val, port; + + /* From the GPIO notifying the over-current situation, find + * out the corresponding port */ + at91_for_each_port(port) { + if (gpiod_to_irq(pdata->overcurrent_pin[port]) == irq) + break; + } + + if (port == AT91_MAX_USBH_PORTS) { + dev_err(& pdev->dev, "overcurrent interrupt from unknown GPIO\n"); + return IRQ_HANDLED; + } + + val = gpiod_get_value(pdata->overcurrent_pin[port]); + + /* When notified of an over-current situation, disable power + on the corresponding port, and mark this port in + over-current. */ + if (!val) { + ohci_at91_usb_set_power(pdata, port, 0); + pdata->overcurrent_status[port] = 1; + pdata->overcurrent_changed[port] = 1; + } + + dev_dbg(& pdev->dev, "overcurrent situation %s\n", + val ? "exited" : "notified"); + + return IRQ_HANDLED; +} + +static const struct of_device_id at91_ohci_dt_ids[] = { + { .compatible = "atmel,at91rm9200-ohci" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids); + +/*-------------------------------------------------------------------------*/ + +static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct at91_usbh_data *pdata; + int i; + int ret; + int err; + u32 ports; + + /* Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + return ret; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + pdev->dev.platform_data = pdata; + + if (!of_property_read_u32(np, "num-ports", &ports)) + pdata->ports = ports; + + at91_for_each_port(i) { + if (i >= pdata->ports) + break; + + pdata->vbus_pin[i] = + devm_gpiod_get_index_optional(&pdev->dev, "atmel,vbus", + i, GPIOD_OUT_HIGH); + if (IS_ERR(pdata->vbus_pin[i])) { + err = PTR_ERR(pdata->vbus_pin[i]); + dev_err(&pdev->dev, "unable to claim gpio \"vbus\": %d\n", err); + continue; + } + } + + at91_for_each_port(i) { + if (i >= pdata->ports) + break; + + pdata->overcurrent_pin[i] = + devm_gpiod_get_index_optional(&pdev->dev, "atmel,oc", + i, GPIOD_IN); + if (!pdata->overcurrent_pin[i]) + continue; + if (IS_ERR(pdata->overcurrent_pin[i])) { + err = PTR_ERR(pdata->overcurrent_pin[i]); + dev_err(&pdev->dev, "unable to claim gpio \"overcurrent\": %d\n", err); + continue; + } + + ret = devm_request_irq(&pdev->dev, + gpiod_to_irq(pdata->overcurrent_pin[i]), + ohci_hcd_at91_overcurrent_irq, + IRQF_SHARED, + "ohci_overcurrent", pdev); + if (ret) + dev_info(&pdev->dev, "failed to request gpio \"overcurrent\" IRQ\n"); + } + + device_init_wakeup(&pdev->dev, 1); + return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev); +} + +static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) +{ + struct at91_usbh_data *pdata = dev_get_platdata(&pdev->dev); + int i; + + if (pdata) { + at91_for_each_port(i) + ohci_at91_usb_set_power(pdata, i, 0); + } + + device_init_wakeup(&pdev->dev, 0); + usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev); + return 0; +} + +static int __maybe_unused +ohci_hcd_at91_drv_suspend(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd); + int ret; + + /* + * Disable wakeup if we are going to sleep with slow clock mode + * enabled. + */ + ohci_at91->wakeup = device_may_wakeup(dev) + && !at91_suspend_entering_slow_clock(); + + if (ohci_at91->wakeup) + enable_irq_wake(hcd->irq); + + ret = ohci_suspend(hcd, ohci_at91->wakeup); + if (ret) { + if (ohci_at91->wakeup) + disable_irq_wake(hcd->irq); + return ret; + } + /* + * The integrated transceivers seem unable to notice disconnect, + * reconnect, or wakeup without the 48 MHz clock active. so for + * correctness, always discard connection state (using reset). + * + * REVISIT: some boards will be able to turn VBUS off... + */ + if (!ohci_at91->wakeup) { + ohci->rh_state = OHCI_RH_HALTED; + + /* flush the writes */ + (void) ohci_readl (ohci, &ohci->regs->control); + msleep(1); + ohci_at91_port_suspend(ohci_at91, 1); + at91_stop_clock(ohci_at91); + } else { + ohci_at91_port_suspend(ohci_at91, 1); + } + + return ret; +} + +static int __maybe_unused +ohci_hcd_at91_drv_resume(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd); + + ohci_at91_port_suspend(ohci_at91, 0); + + if (ohci_at91->wakeup) + disable_irq_wake(hcd->irq); + else + at91_start_clock(ohci_at91); + + /* + * According to the comment in ohci_hcd_at91_drv_suspend() + * we need to do a reset if the 48Mhz clock was stopped, + * that is, if ohci_at91->wakeup is clear. Tell ohci_resume() + * to reset in this case by setting its "hibernated" flag. + */ + ohci_resume(hcd, !ohci_at91->wakeup); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(ohci_hcd_at91_pm_ops, ohci_hcd_at91_drv_suspend, + ohci_hcd_at91_drv_resume); + +static struct platform_driver ohci_hcd_at91_driver = { + .probe = ohci_hcd_at91_drv_probe, + .remove = ohci_hcd_at91_drv_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "at91_ohci", + .pm = &ohci_hcd_at91_pm_ops, + .of_match_table = at91_ohci_dt_ids, + }, +}; + +static int __init ohci_at91_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + ohci_init_driver(&ohci_at91_hc_driver, &ohci_at91_drv_overrides); + + /* + * The Atmel HW has some unusual quirks, which require Atmel-specific + * workarounds. We override certain hc_driver functions here to + * achieve that. We explicitly do not enhance ohci_driver_overrides to + * allow this more easily, since this is an unusual case, and we don't + * want to encourage others to override these functions by making it + * too easy. + */ + + ohci_at91_hc_driver.hub_status_data = ohci_at91_hub_status_data; + ohci_at91_hc_driver.hub_control = ohci_at91_hub_control; + + return platform_driver_register(&ohci_hcd_at91_driver); +} +module_init(ohci_at91_init); + +static void __exit ohci_at91_cleanup(void) +{ + platform_driver_unregister(&ohci_hcd_at91_driver); +} +module_exit(ohci_at91_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:at91_ohci"); -- cgit v1.2.3