From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/usb/host/xhci-pci.c | 769 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 769 insertions(+) create mode 100644 drivers/usb/host/xhci-pci.c (limited to 'drivers/usb/host/xhci-pci.c') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c new file mode 100644 index 000000000..e02ef31da --- /dev/null +++ b/drivers/usb/host/xhci-pci.c @@ -0,0 +1,769 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * xHCI host controller driver PCI Bus Glue. + * + * Copyright (C) 2008 Intel Corp. + * + * Author: Sarah Sharp + * Some code borrowed from the Linux EHCI driver. + */ + +#include +#include +#include +#include +#include +#include + +#include "xhci.h" +#include "xhci-trace.h" +#include "xhci-pci.h" + +#define SSIC_PORT_NUM 2 +#define SSIC_PORT_CFG2 0x880c +#define SSIC_PORT_CFG2_OFFSET 0x30 +#define PROG_DONE (1 << 30) +#define SSIC_PORT_UNUSED (1 << 31) +#define SPARSE_DISABLE_BIT 17 +#define SPARSE_CNTL_ENABLE 0xC12C + +/* Device for a quirk */ +#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 +#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 +#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009 0x1009 +#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1100 0x1100 +#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400 + +#define PCI_VENDOR_ID_ETRON 0x1b6f +#define PCI_DEVICE_ID_EJ168 0x7023 + +#define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31 +#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 +#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI 0x9cb1 +#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5 +#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI 0xa12f +#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f +#define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8 +#define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8 +#define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8 +#define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0 +#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI 0x15b5 +#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI 0x15b6 +#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI 0x15c1 +#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI 0x15db +#define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI 0x15d4 +#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI 0x15e9 +#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI 0x15ec +#define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI 0x15f0 +#define PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI 0x8a13 +#define PCI_DEVICE_ID_INTEL_CML_XHCI 0xa3af +#define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI 0x9a13 +#define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI 0x1138 +#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI 0x51ed +#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI 0x54ed + +#define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639 +#define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9 +#define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba +#define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb +#define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc + +#define PCI_DEVICE_ID_ASMEDIA_1042_XHCI 0x1042 +#define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142 +#define PCI_DEVICE_ID_ASMEDIA_1142_XHCI 0x1242 +#define PCI_DEVICE_ID_ASMEDIA_2142_XHCI 0x2142 +#define PCI_DEVICE_ID_ASMEDIA_3242_XHCI 0x3242 + +static const char hcd_name[] = "xhci_hcd"; + +static struct hc_driver __read_mostly xhci_pci_hc_driver; + +static int xhci_pci_setup(struct usb_hcd *hcd); +static int xhci_pci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, + struct usb_tt *tt, gfp_t mem_flags); + +static const struct xhci_driver_overrides xhci_pci_overrides __initconst = { + .reset = xhci_pci_setup, + .update_hub_device = xhci_pci_update_hub_device, +}; + +/* called after powerup, by probe or system-pm "wakeup" */ +static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev) +{ + /* + * TODO: Implement finding debug ports later. + * TODO: see if there are any quirks that need to be added to handle + * new extended capabilities. + */ + + /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */ + if (!pci_set_mwi(pdev)) + xhci_dbg(xhci, "MWI active\n"); + + xhci_dbg(xhci, "Finished xhci_pci_reinit\n"); + return 0; +} + +static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct xhci_driver_data *driver_data; + const struct pci_device_id *id; + + id = pci_match_id(to_pci_driver(pdev->dev.driver)->id_table, pdev); + + if (id && id->driver_data) { + driver_data = (struct xhci_driver_data *)id->driver_data; + xhci->quirks |= driver_data->quirks; + } + + /* Look for vendor-specific quirks */ + if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && + (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK || + pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) { + if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && + pdev->revision == 0x0) { + xhci->quirks |= XHCI_RESET_EP_QUIRK; + xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, + "XHCI_RESET_EP_QUIRK for this evaluation HW is deprecated"); + } + if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && + pdev->revision == 0x4) { + xhci->quirks |= XHCI_SLOW_SUSPEND; + xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, + "QUIRK: Fresco Logic xHC revision %u" + "must be suspended extra slowly", + pdev->revision); + } + if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) + xhci->quirks |= XHCI_BROKEN_STREAMS; + /* Fresco Logic confirms: all revisions of this chip do not + * support MSI, even though some of them claim to in their PCI + * capabilities. + */ + xhci->quirks |= XHCI_BROKEN_MSI; + xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, + "QUIRK: Fresco Logic revision %u " + "has broken MSI implementation", + pdev->revision); + xhci->quirks |= XHCI_TRUST_TX_LENGTH; + } + + if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && + pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009) + xhci->quirks |= XHCI_BROKEN_STREAMS; + + if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && + pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1100) + xhci->quirks |= XHCI_TRUST_TX_LENGTH; + + if (pdev->vendor == PCI_VENDOR_ID_NEC) + xhci->quirks |= XHCI_NEC_HOST; + + if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) + xhci->quirks |= XHCI_AMD_0x96_HOST; + + /* AMD PLL quirk */ + if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_quirk_pll_check()) + xhci->quirks |= XHCI_AMD_PLL_FIX; + + if (pdev->vendor == PCI_VENDOR_ID_AMD && + (pdev->device == 0x145c || + pdev->device == 0x15e0 || + pdev->device == 0x15e1 || + pdev->device == 0x43bb)) + xhci->quirks |= XHCI_SUSPEND_DELAY; + + if (pdev->vendor == PCI_VENDOR_ID_AMD && + (pdev->device == 0x15e0 || pdev->device == 0x15e1)) + xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND; + + if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x15e5) { + xhci->quirks |= XHCI_DISABLE_SPARSE; + xhci->quirks |= XHCI_RESET_ON_RESUME; + } + + if (pdev->vendor == PCI_VENDOR_ID_AMD) + xhci->quirks |= XHCI_TRUST_TX_LENGTH; + + if ((pdev->vendor == PCI_VENDOR_ID_AMD) && + ((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) || + (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_3) || + (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2) || + (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1))) + xhci->quirks |= XHCI_U2_DISABLE_WAKE; + + if (pdev->vendor == PCI_VENDOR_ID_AMD && + pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI) + xhci->quirks |= XHCI_BROKEN_D3COLD_S2I; + + if (pdev->vendor == PCI_VENDOR_ID_INTEL) { + xhci->quirks |= XHCI_LPM_SUPPORT; + xhci->quirks |= XHCI_INTEL_HOST; + xhci->quirks |= XHCI_AVOID_BEI; + } + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) { + xhci->quirks |= XHCI_EP_LIMIT_QUIRK; + xhci->limit_active_eps = 64; + xhci->quirks |= XHCI_SW_BW_CHECKING; + /* + * PPT desktop boards DH77EB and DH77DF will power back on after + * a few seconds of being shutdown. The fix for this is to + * switch the ports from xHCI to EHCI on shutdown. We can't use + * DMI information to find those particular boards (since each + * vendor will change the board name), so we have to key off all + * PPT chipsets. + */ + xhci->quirks |= XHCI_SPURIOUS_REBOOT; + } + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI)) { + xhci->quirks |= XHCI_SPURIOUS_REBOOT; + xhci->quirks |= XHCI_SPURIOUS_WAKEUP; + } + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + (pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_CML_XHCI)) { + xhci->quirks |= XHCI_PME_STUCK_QUIRK; + } + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) + xhci->quirks |= XHCI_SSIC_PORT_UNUSED; + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) + xhci->quirks |= XHCI_INTEL_USB_ROLE_SW; + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI)) + xhci->quirks |= XHCI_MISSING_CAS; + + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + (pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_PCH_XHCI)) + xhci->quirks |= XHCI_RESET_TO_DEFAULT; + + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + (pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI)) + xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW; + + if (pdev->vendor == PCI_VENDOR_ID_ETRON && + pdev->device == PCI_DEVICE_ID_EJ168) { + xhci->quirks |= XHCI_RESET_ON_RESUME; + xhci->quirks |= XHCI_TRUST_TX_LENGTH; + xhci->quirks |= XHCI_BROKEN_STREAMS; + } + if (pdev->vendor == PCI_VENDOR_ID_RENESAS && + pdev->device == 0x0014) { + xhci->quirks |= XHCI_TRUST_TX_LENGTH; + xhci->quirks |= XHCI_ZERO_64B_REGS; + } + if (pdev->vendor == PCI_VENDOR_ID_RENESAS && + pdev->device == 0x0015) { + xhci->quirks |= XHCI_RESET_ON_RESUME; + xhci->quirks |= XHCI_ZERO_64B_REGS; + } + if (pdev->vendor == PCI_VENDOR_ID_VIA) + xhci->quirks |= XHCI_RESET_ON_RESUME; + + /* See https://bugzilla.kernel.org/show_bug.cgi?id=79511 */ + if (pdev->vendor == PCI_VENDOR_ID_VIA && + pdev->device == 0x3432) + xhci->quirks |= XHCI_BROKEN_STREAMS; + + if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) + xhci->quirks |= XHCI_LPM_SUPPORT; + + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && + pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) { + /* + * try to tame the ASMedia 1042 controller which reports 0.96 + * but appears to behave more like 1.0 + */ + xhci->quirks |= XHCI_SPURIOUS_SUCCESS; + xhci->quirks |= XHCI_BROKEN_STREAMS; + } + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && + pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) { + xhci->quirks |= XHCI_TRUST_TX_LENGTH; + xhci->quirks |= XHCI_NO_64BIT_SUPPORT; + } + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && + (pdev->device == PCI_DEVICE_ID_ASMEDIA_1142_XHCI || + pdev->device == PCI_DEVICE_ID_ASMEDIA_2142_XHCI || + pdev->device == PCI_DEVICE_ID_ASMEDIA_3242_XHCI)) + xhci->quirks |= XHCI_NO_64BIT_SUPPORT; + + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && + pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) + xhci->quirks |= XHCI_ASMEDIA_MODIFY_FLOWCONTROL; + + if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) + xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7; + + if ((pdev->vendor == PCI_VENDOR_ID_BROADCOM || + pdev->vendor == PCI_VENDOR_ID_CAVIUM) && + pdev->device == 0x9026) + xhci->quirks |= XHCI_RESET_PLL_ON_DISCONNECT; + + if (pdev->vendor == PCI_VENDOR_ID_AMD && + (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2 || + pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4)) + xhci->quirks |= XHCI_NO_SOFT_RETRY; + + if (pdev->vendor == PCI_VENDOR_ID_ZHAOXIN) { + xhci->quirks |= XHCI_ZHAOXIN_HOST; + + if (pdev->device == 0x9202) { + xhci->quirks |= XHCI_RESET_ON_RESUME; + xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH; + } + + if (pdev->device == 0x9203) + xhci->quirks |= XHCI_ZHAOXIN_TRB_FETCH; + } + + /* xHC spec requires PCI devices to support D3hot and D3cold */ + if (xhci->hci_version >= 0x120) + xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW; + + if (xhci->quirks & XHCI_RESET_ON_RESUME) + xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, + "QUIRK: Resetting on resume"); +} + +#ifdef CONFIG_ACPI +static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) +{ + static const guid_t intel_dsm_guid = + GUID_INIT(0xac340cb7, 0xe901, 0x45bf, + 0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23); + union acpi_object *obj; + + obj = acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), &intel_dsm_guid, 3, 1, + NULL); + ACPI_FREE(obj); +} + +static void xhci_find_lpm_incapable_ports(struct usb_hcd *hcd, struct usb_device *hdev) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct xhci_hub *rhub = &xhci->usb3_rhub; + int ret; + int i; + + /* This is not the usb3 roothub we are looking for */ + if (hcd != rhub->hcd) + return; + + if (hdev->maxchild > rhub->num_ports) { + dev_err(&hdev->dev, "USB3 roothub port number mismatch\n"); + return; + } + + for (i = 0; i < hdev->maxchild; i++) { + ret = usb_acpi_port_lpm_incapable(hdev, i); + + dev_dbg(&hdev->dev, "port-%d disable U1/U2 _DSM: %d\n", i + 1, ret); + + if (ret >= 0) { + rhub->ports[i]->lpm_incapable = ret; + continue; + } + } +} + +#else +static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { } +static void xhci_find_lpm_incapable_ports(struct usb_hcd *hcd, struct usb_device *hdev) { } +#endif /* CONFIG_ACPI */ + +/* called during probe() after chip reset completes */ +static int xhci_pci_setup(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci; + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + int retval; + + xhci = hcd_to_xhci(hcd); + if (!xhci->sbrn) + pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn); + + /* imod_interval is the interrupt moderation value in nanoseconds. */ + xhci->imod_interval = 40000; + + retval = xhci_gen_setup(hcd, xhci_pci_quirks); + if (retval) + return retval; + + if (!usb_hcd_is_primary_hcd(hcd)) + return 0; + + if (xhci->quirks & XHCI_PME_STUCK_QUIRK) + xhci_pme_acpi_rtd3_enable(pdev); + + xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn); + + /* Find any debug ports */ + return xhci_pci_reinit(xhci, pdev); +} + +static int xhci_pci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, + struct usb_tt *tt, gfp_t mem_flags) +{ + /* Check if acpi claims some USB3 roothub ports are lpm incapable */ + if (!hdev->parent) + xhci_find_lpm_incapable_ports(hcd, hdev); + + return xhci_update_hub_device(hcd, hdev, tt, mem_flags); +} + +/* + * We need to register our own PCI probe function (instead of the USB core's + * function) in order to create a second roothub under xHCI. + */ +static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + int retval; + struct xhci_hcd *xhci; + struct usb_hcd *hcd; + struct xhci_driver_data *driver_data; + struct reset_control *reset; + + driver_data = (struct xhci_driver_data *)id->driver_data; + if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) { + retval = renesas_xhci_check_request_fw(dev, id); + if (retval) + return retval; + } + + reset = devm_reset_control_get_optional_exclusive(&dev->dev, NULL); + if (IS_ERR(reset)) + return PTR_ERR(reset); + reset_control_reset(reset); + + /* Prevent runtime suspending between USB-2 and USB-3 initialization */ + pm_runtime_get_noresume(&dev->dev); + + /* Register the USB 2.0 roothub. + * FIXME: USB core must know to register the USB 2.0 roothub first. + * This is sort of silly, because we could just set the HCD driver flags + * to say USB 2.0, but I'm not sure what the implications would be in + * the other parts of the HCD code. + */ + retval = usb_hcd_pci_probe(dev, &xhci_pci_hc_driver); + + if (retval) + goto put_runtime_pm; + + /* USB 2.0 roothub is stored in the PCI device now. */ + hcd = dev_get_drvdata(&dev->dev); + xhci = hcd_to_xhci(hcd); + xhci->reset = reset; + xhci->shared_hcd = usb_create_shared_hcd(&xhci_pci_hc_driver, &dev->dev, + pci_name(dev), hcd); + if (!xhci->shared_hcd) { + retval = -ENOMEM; + goto dealloc_usb2_hcd; + } + + retval = xhci_ext_cap_init(xhci); + if (retval) + goto put_usb3_hcd; + + retval = usb_add_hcd(xhci->shared_hcd, dev->irq, + IRQF_SHARED); + if (retval) + goto put_usb3_hcd; + /* Roothub already marked as USB 3.0 speed */ + + if (!(xhci->quirks & XHCI_BROKEN_STREAMS) && + HCC_MAX_PSA(xhci->hcc_params) >= 4) + xhci->shared_hcd->can_do_streams = 1; + + /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */ + pm_runtime_put_noidle(&dev->dev); + + if (pci_choose_state(dev, PMSG_SUSPEND) == PCI_D0) + pm_runtime_forbid(&dev->dev); + else if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW) + pm_runtime_allow(&dev->dev); + + dma_set_max_seg_size(&dev->dev, UINT_MAX); + + return 0; + +put_usb3_hcd: + usb_put_hcd(xhci->shared_hcd); +dealloc_usb2_hcd: + usb_hcd_pci_remove(dev); +put_runtime_pm: + pm_runtime_put_noidle(&dev->dev); + return retval; +} + +static void xhci_pci_remove(struct pci_dev *dev) +{ + struct xhci_hcd *xhci; + + xhci = hcd_to_xhci(pci_get_drvdata(dev)); + + xhci->xhc_state |= XHCI_STATE_REMOVING; + + if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW) + pm_runtime_forbid(&dev->dev); + + if (xhci->shared_hcd) { + usb_remove_hcd(xhci->shared_hcd); + usb_put_hcd(xhci->shared_hcd); + xhci->shared_hcd = NULL; + } + + /* Workaround for spurious wakeups at shutdown with HSW */ + if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) + pci_set_power_state(dev, PCI_D3hot); + + usb_hcd_pci_remove(dev); +} + +#ifdef CONFIG_PM +/* + * In some Intel xHCI controllers, in order to get D3 working, + * through a vendor specific SSIC CONFIG register at offset 0x883c, + * SSIC PORT need to be marked as "unused" before putting xHCI + * into D3. After D3 exit, the SSIC port need to be marked as "used". + * Without this change, xHCI might not enter D3 state. + */ +static void xhci_ssic_port_unused_quirk(struct usb_hcd *hcd, bool suspend) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + u32 val; + void __iomem *reg; + int i; + + for (i = 0; i < SSIC_PORT_NUM; i++) { + reg = (void __iomem *) xhci->cap_regs + + SSIC_PORT_CFG2 + + i * SSIC_PORT_CFG2_OFFSET; + + /* Notify SSIC that SSIC profile programming is not done. */ + val = readl(reg) & ~PROG_DONE; + writel(val, reg); + + /* Mark SSIC port as unused(suspend) or used(resume) */ + val = readl(reg); + if (suspend) + val |= SSIC_PORT_UNUSED; + else + val &= ~SSIC_PORT_UNUSED; + writel(val, reg); + + /* Notify SSIC that SSIC profile programming is done */ + val = readl(reg) | PROG_DONE; + writel(val, reg); + readl(reg); + } +} + +/* + * Make sure PME works on some Intel xHCI controllers by writing 1 to clear + * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4 + */ +static void xhci_pme_quirk(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + void __iomem *reg; + u32 val; + + reg = (void __iomem *) xhci->cap_regs + 0x80a4; + val = readl(reg); + writel(val | BIT(28), reg); + readl(reg); +} + +static void xhci_sparse_control_quirk(struct usb_hcd *hcd) +{ + u32 reg; + + reg = readl(hcd->regs + SPARSE_CNTL_ENABLE); + reg &= ~BIT(SPARSE_DISABLE_BIT); + writel(reg, hcd->regs + SPARSE_CNTL_ENABLE); +} + +static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + int ret; + + /* + * Systems with the TI redriver that loses port status change events + * need to have the registers polled during D3, so avoid D3cold. + */ + if (xhci->quirks & XHCI_COMP_MODE_QUIRK) + pci_d3cold_disable(pdev); + +#ifdef CONFIG_SUSPEND + /* d3cold is broken, but only when s2idle is used */ + if (pm_suspend_target_state == PM_SUSPEND_TO_IDLE && + xhci->quirks & (XHCI_BROKEN_D3COLD_S2I)) + pci_d3cold_disable(pdev); +#endif + + if (xhci->quirks & XHCI_PME_STUCK_QUIRK) + xhci_pme_quirk(hcd); + + if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) + xhci_ssic_port_unused_quirk(hcd, true); + + if (xhci->quirks & XHCI_DISABLE_SPARSE) + xhci_sparse_control_quirk(hcd); + + ret = xhci_suspend(xhci, do_wakeup); + if (ret && (xhci->quirks & XHCI_SSIC_PORT_UNUSED)) + xhci_ssic_port_unused_quirk(hcd, false); + + return ret; +} + +static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + int retval = 0; + + reset_control_reset(xhci->reset); + + /* The BIOS on systems with the Intel Panther Point chipset may or may + * not support xHCI natively. That means that during system resume, it + * may switch the ports back to EHCI so that users can use their + * keyboard to select a kernel from GRUB after resume from hibernate. + * + * The BIOS is supposed to remember whether the OS had xHCI ports + * enabled before resume, and switch the ports back to xHCI when the + * BIOS/OS semaphore is written, but we all know we can't trust BIOS + * writers. + * + * Unconditionally switch the ports back to xHCI after a system resume. + * It should not matter whether the EHCI or xHCI controller is + * resumed first. It's enough to do the switchover in xHCI because + * USB core won't notice anything as the hub driver doesn't start + * running again until after all the devices (including both EHCI and + * xHCI host controllers) have been resumed. + */ + + if (pdev->vendor == PCI_VENDOR_ID_INTEL) + usb_enable_intel_xhci_ports(pdev); + + if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) + xhci_ssic_port_unused_quirk(hcd, false); + + if (xhci->quirks & XHCI_PME_STUCK_QUIRK) + xhci_pme_quirk(hcd); + + retval = xhci_resume(xhci, hibernated); + return retval; +} + +static void xhci_pci_shutdown(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + + xhci_shutdown(hcd); + + /* Yet another workaround for spurious wakeups at shutdown with HSW */ + if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) + pci_set_power_state(pdev, PCI_D3hot); +} +#endif /* CONFIG_PM */ + +/*-------------------------------------------------------------------------*/ + +static const struct xhci_driver_data reneses_data = { + .quirks = XHCI_RENESAS_FW_QUIRK, + .firmware = "renesas_usb_fw.mem", +}; + +/* PCI driver selection metadata; PCI hotplugging uses this */ +static const struct pci_device_id pci_ids[] = { + { PCI_DEVICE(0x1912, 0x0014), + .driver_data = (unsigned long)&reneses_data, + }, + { PCI_DEVICE(0x1912, 0x0015), + .driver_data = (unsigned long)&reneses_data, + }, + /* handle any USB 3.0 xHCI controller */ + { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0), + }, + { /* end: all zeroes */ } +}; +MODULE_DEVICE_TABLE(pci, pci_ids); + +/* + * Without CONFIG_USB_XHCI_PCI_RENESAS renesas_xhci_check_request_fw() won't + * load firmware, so don't encumber the xhci-pci driver with it. + */ +#if IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS) +MODULE_FIRMWARE("renesas_usb_fw.mem"); +#endif + +/* pci driver glue; this is a "new style" PCI driver module */ +static struct pci_driver xhci_pci_driver = { + .name = hcd_name, + .id_table = pci_ids, + + .probe = xhci_pci_probe, + .remove = xhci_pci_remove, + /* suspend and resume implemented later */ + + .shutdown = usb_hcd_pci_shutdown, +#ifdef CONFIG_PM + .driver = { + .pm = &usb_hcd_pci_pm_ops + }, +#endif +}; + +static int __init xhci_pci_init(void) +{ + xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides); +#ifdef CONFIG_PM + xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend; + xhci_pci_hc_driver.pci_resume = xhci_pci_resume; + xhci_pci_hc_driver.shutdown = xhci_pci_shutdown; +#endif + return pci_register_driver(&xhci_pci_driver); +} +module_init(xhci_pci_init); + +static void __exit xhci_pci_exit(void) +{ + pci_unregister_driver(&xhci_pci_driver); +} +module_exit(xhci_pci_exit); + +MODULE_DESCRIPTION("xHCI PCI Host Controller Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3