From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/usb/misc/Kconfig | 313 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 313 insertions(+) create mode 100644 drivers/usb/misc/Kconfig (limited to 'drivers/usb/misc/Kconfig') diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig new file mode 100644 index 000000000..9367c12c7 --- /dev/null +++ b/drivers/usb/misc/Kconfig @@ -0,0 +1,313 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# USB Miscellaneous driver configuration +# +comment "USB Miscellaneous drivers" + +config USB_EMI62 + tristate "EMI 6|2m USB Audio interface support" + help + This driver loads firmware to Emagic EMI 6|2m low latency USB + Audio and Midi interface. + + After firmware load the device is handled with standard linux + USB Audio driver. + + This code is also available as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called audio. If you want to compile it as a + module, say M here and read . + +config USB_EMI26 + tristate "EMI 2|6 USB Audio interface support" + help + This driver loads firmware to Emagic EMI 2|6 low latency USB + Audio interface. + + After firmware load the device is handled with standard linux + USB Audio driver. + + To compile this driver as a module, choose M here: the + module will be called emi26. + +config USB_ADUTUX + tristate "ADU devices from Ontrak Control Systems" + help + Say Y if you want to use an ADU device from Ontrak Control + Systems. + + To compile this driver as a module, choose M here. The module + will be called adutux. + +config USB_SEVSEG + tristate "USB 7-Segment LED Display" + help + Say Y here if you have a USB 7-Segment Display by Delcom + + To compile this driver as a module, choose M here: the + module will be called usbsevseg. + +config USB_LEGOTOWER + tristate "USB Lego Infrared Tower support" + help + Say Y here if you want to connect a USB Lego Infrared Tower to your + computer's USB port. + + This code is also available as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called legousbtower. If you want to compile it as + a module, say M here and read + . + +config USB_LCD + tristate "USB LCD driver support" + help + Say Y here if you want to connect an USBLCD to your computer's + USB port. The USBLCD is a small USB interface board for + alphanumeric LCD modules. See for more + information. + + To compile this driver as a module, choose M here: the + module will be called usblcd. + +config USB_CYPRESS_CY7C63 + tristate "Cypress CY7C63xxx USB driver support" + help + Say Y here if you want to connect a Cypress CY7C63xxx + micro controller to your computer's USB port. Currently this + driver supports the pre-programmed devices (incl. firmware) + by AK Modul-Bus Computer GmbH. + + Please see: https://www.ak-modul-bus.de/stat/mikrocontroller.html + + To compile this driver as a module, choose M here: the + module will be called cypress_cy7c63. + +config USB_CYTHERM + tristate "Cypress USB thermometer driver support" + help + Say Y here if you want to connect a Cypress USB thermometer + device to your computer's USB port. This device is also known + as the Cypress USB Starter kit or demo board. The Elektor + magazine published a modified version of this device in issue + #291. + + To compile this driver as a module, choose M here: the + module will be called cytherm. + +config USB_IDMOUSE + tristate "Siemens ID USB Mouse Fingerprint sensor support" + help + Say Y here if you want to use the fingerprint sensor on + the Siemens ID Mouse. There is also a Siemens ID Mouse + _Professional_, which has not been tested with this driver, + but uses the same sensor and may therefore work. + + This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX", + which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm". + + See also . + +config USB_FTDI_ELAN + tristate "Elan PCMCIA CardBus Adapter USB Client" + help + ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters. + Currently only the U132 adapter is available. + + The U132 is specifically designed for CardBus PC cards that contain + an OHCI host controller. Typical PC cards are the Orange Mobile 3G + Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work + with PC cards that do not contain an OHCI controller. To use a U132 + adapter you will need this "ftdi-elan" module as well as the "u132-hcd" + module which is a USB host controller driver that talks to the OHCI + controller within CardBus card that are inserted in the U132 adapter. + + This driver has been tested with a CardBus OHCI USB adapter, and + worked with a USB PEN Drive inserted into the first USB port of + the PCCARD. A rather pointless thing to do, but useful for testing. + + See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller" + + It is safe to say M here. + +config USB_APPLEDISPLAY + tristate "Apple Cinema Display support" + select BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to control the backlight of Apple Cinema + Displays over USB. This driver provides a sysfs interface. + +config USB_QCOM_EUD + tristate "QCOM Embedded USB Debugger(EUD) Driver" + depends on ARCH_QCOM || COMPILE_TEST + select USB_ROLE_SWITCH + help + This module enables support for Qualcomm Technologies, Inc. + Embedded USB Debugger (EUD). The EUD is a control peripheral + which reports VBUS attach/detach events and has USB-based + debug and trace capabilities. On selecting m, the module name + that is built is qcom_eud.ko + +config APPLE_MFI_FASTCHARGE + tristate "Fast charge control for iOS devices" + select POWER_SUPPLY + help + Say Y here if you want to control whether iOS devices will + fast charge from the USB interface, as implemented in "MFi" + chargers. + + It is safe to say M here. + +source "drivers/usb/misc/sisusbvga/Kconfig" + +config USB_LD + tristate "USB LD driver" + help + This driver is for generic USB devices that use interrupt transfers, + like LD Didactic's USB devices. + + To compile this driver as a module, choose M here: the + module will be called ldusb. + +config USB_TRANCEVIBRATOR + tristate "PlayStation 2 Trance Vibrator driver support" + help + Say Y here if you want to connect a PlayStation 2 Trance Vibrator + device to your computer's USB port. + + To compile this driver as a module, choose M here: the + module will be called trancevibrator. + +config USB_IOWARRIOR + tristate "IO Warrior driver support" + help + Say Y here if you want to support the IO Warrior devices from Code + Mercenaries. This includes support for the following devices: + IO Warrior 40 + IO Warrior 24 + IO Warrior 56 + IO Warrior 24 Power Vampire + + To compile this driver as a module, choose M here: the + module will be called iowarrior. + +config USB_TEST + tristate "USB testing driver" + help + This driver is for testing host controller software. It is used + with specialized device firmware for regression and stress testing, + to help prevent problems from cropping up with "real" drivers. + + See for more information, + including sample test device firmware and "how to use it". + +config USB_EHSET_TEST_FIXTURE + tristate "USB EHSET Test Fixture driver" + help + Say Y here if you want to support the special test fixture device + used for the USB-IF Embedded Host High-Speed Electrical Test procedure. + + When the test fixture is connected, it can enumerate as one of several + VID/PID pairs. This driver then initiates a corresponding test mode on + the downstream port to which the test fixture is attached. + + See for more + information. + +config USB_ISIGHTFW + tristate "iSight firmware loading support" + select FW_LOADER + help + This driver loads firmware for USB Apple iSight cameras, allowing + them to be driven by the USB video class driver available at + http://linux-uvc.berlios.de + + The firmware for this driver must be extracted from the MacOS + driver beforehand. Tools for doing so are available at + http://bersace03.free.fr + +config USB_YUREX + tristate "USB YUREX driver support" + help + Say Y here if you want to connect a YUREX to your computer's + USB port. The YUREX is a leg-shakes sensor. See + for further information. + This driver supports read/write of leg-shakes counter and + fasync for the counter update via a device file /dev/yurex*. + + To compile this driver as a module, choose M here: the + module will be called yurex. + +config USB_EZUSB_FX2 + tristate "Functions for loading firmware on EZUSB chips" + help + Say Y here if you need EZUSB device support. + (Cypress FX/FX2/FX2LP microcontrollers) + +config USB_HUB_USB251XB + tristate "USB251XB Hub Controller Configuration Driver" + depends on I2C + help + This option enables support for configuration via SMBus of the + Microchip USB251x/xBi USB 2.0 Hub Controller series. Configuration + parameters may be set in devicetree or platform data. + Say Y or M here if you need to configure such a device via SMBus. + +config USB_HSIC_USB3503 + tristate "USB3503 HSIC to USB20 Driver" + depends on I2C + select REGMAP_I2C + help + This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. + +config USB_HSIC_USB4604 + tristate "USB4604 HSIC to USB20 Driver" + depends on I2C + help + This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver. + +config USB_LINK_LAYER_TEST + tristate "USB Link Layer Test driver" + help + This driver is for generating specific traffic for Super Speed Link + Layer Test Device. Say Y only when you want to conduct USB Super Speed + Link Layer Test for host controllers. + +config USB_CHAOSKEY + tristate "ChaosKey random number generator driver support" + depends on HW_RANDOM + help + Say Y here if you want to connect an AltusMetrum ChaosKey or + Araneus Alea I to your computer's USB port. These devices + are hardware random number generators which hook into the + kernel entropy pool to ensure a large supply of entropy for + /dev/random and /dev/urandom and also provides direct access + via /dev/chaoskeyX + + To compile this driver as a module, choose M here: the + module will be called chaoskey. + +config BRCM_USB_PINMAP + tristate "Broadcom pinmap driver support" + depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST + default ARCH_BRCMSTB && PHY_BRCM_USB + help + This option enables support for remapping some USB external + signals, which are typically on dedicated pins on the chip, + to any gpio. + +config USB_ONBOARD_HUB + tristate "Onboard USB hub support" + depends on OF || COMPILE_TEST + help + Say Y here if you want to support discrete onboard USB hubs that + don't require an additional control bus for initialization, but + need some non-trivial form of initialization, such as enabling a + power regulator. An example for such a hub is the Realtek + RTS5411. + + This driver can be used as a module but its state (module vs + builtin) must match the state of the USB subsystem. Enabling + this config will enable the driver and it will automatically + match the state of the USB subsystem. If this driver is a + module it will be called onboard_usb_hub. -- cgit v1.2.3