From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/usb/mtu3/mtu3_gadget_ep0.c | 916 +++++++++++++++++++++++++++++++++++++ 1 file changed, 916 insertions(+) create mode 100644 drivers/usb/mtu3/mtu3_gadget_ep0.c (limited to 'drivers/usb/mtu3/mtu3_gadget_ep0.c') diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c new file mode 100644 index 000000000..e4fd1bb14 --- /dev/null +++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c @@ -0,0 +1,916 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * mtu3_gadget_ep0.c - MediaTek USB3 DRD peripheral driver ep0 handling + * + * Copyright (c) 2016 MediaTek Inc. + * + * Author: Chunfeng.Yun + */ + +#include +#include + +#include "mtu3.h" +#include "mtu3_debug.h" +#include "mtu3_trace.h" + +/* ep0 is always mtu3->in_eps[0] */ +#define next_ep0_request(mtu) next_request((mtu)->ep0) + +/* for high speed test mode; see USB 2.0 spec 7.1.20 */ +static const u8 mtu3_test_packet[53] = { + /* implicit SYNC then DATA0 to start */ + + /* JKJKJKJK x9 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* JJKKJJKK x8 */ + 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, + /* JJJJKKKK x8 */ + 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, + /* JJJJJJJKKKKKKK x8 */ + 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + /* JJJJJJJK x8 */ + 0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, + /* JKKKKKKK x10, JK */ + 0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e, + /* implicit CRC16 then EOP to end */ +}; + +static char *decode_ep0_state(struct mtu3 *mtu) +{ + switch (mtu->ep0_state) { + case MU3D_EP0_STATE_SETUP: + return "SETUP"; + case MU3D_EP0_STATE_TX: + return "IN"; + case MU3D_EP0_STATE_RX: + return "OUT"; + case MU3D_EP0_STATE_TX_END: + return "TX-END"; + case MU3D_EP0_STATE_STALL: + return "STALL"; + default: + return "??"; + } +} + +static void ep0_req_giveback(struct mtu3 *mtu, struct usb_request *req) +{ + mtu3_req_complete(mtu->ep0, req, 0); +} + +static int +forward_to_driver(struct mtu3 *mtu, const struct usb_ctrlrequest *setup) +__releases(mtu->lock) +__acquires(mtu->lock) +{ + int ret; + + if (!mtu->gadget_driver || !mtu->async_callbacks) + return -EOPNOTSUPP; + + spin_unlock(&mtu->lock); + ret = mtu->gadget_driver->setup(&mtu->g, setup); + spin_lock(&mtu->lock); + + dev_dbg(mtu->dev, "%s ret %d\n", __func__, ret); + return ret; +} + +static void ep0_write_fifo(struct mtu3_ep *mep, const u8 *src, u16 len) +{ + void __iomem *fifo = mep->mtu->mac_base + U3D_FIFO0; + u16 index = 0; + + dev_dbg(mep->mtu->dev, "%s: ep%din, len=%d, buf=%p\n", + __func__, mep->epnum, len, src); + + if (len >= 4) { + iowrite32_rep(fifo, src, len >> 2); + index = len & ~0x03; + } + if (len & 0x02) { + writew(*(u16 *)&src[index], fifo); + index += 2; + } + if (len & 0x01) + writeb(src[index], fifo); +} + +static void ep0_read_fifo(struct mtu3_ep *mep, u8 *dst, u16 len) +{ + void __iomem *fifo = mep->mtu->mac_base + U3D_FIFO0; + u32 value; + u16 index = 0; + + dev_dbg(mep->mtu->dev, "%s: ep%dout len=%d buf=%p\n", + __func__, mep->epnum, len, dst); + + if (len >= 4) { + ioread32_rep(fifo, dst, len >> 2); + index = len & ~0x03; + } + if (len & 0x3) { + value = readl(fifo); + memcpy(&dst[index], &value, len & 0x3); + } + +} + +static void ep0_load_test_packet(struct mtu3 *mtu) +{ + /* + * because the length of test packet is less than max packet of HS ep0, + * write it into fifo directly. + */ + ep0_write_fifo(mtu->ep0, mtu3_test_packet, sizeof(mtu3_test_packet)); +} + +/* + * A. send STALL for setup transfer without data stage: + * set SENDSTALL and SETUPPKTRDY at the same time; + * B. send STALL for other cases: + * set SENDSTALL only. + */ +static void ep0_stall_set(struct mtu3_ep *mep0, bool set, u32 pktrdy) +{ + struct mtu3 *mtu = mep0->mtu; + void __iomem *mbase = mtu->mac_base; + u32 csr; + + /* EP0_SENTSTALL is W1C */ + csr = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS; + if (set) + csr |= EP0_SENDSTALL | pktrdy; + else + csr = (csr & ~EP0_SENDSTALL) | EP0_SENTSTALL; + mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr); + + mtu->delayed_status = false; + mtu->ep0_state = MU3D_EP0_STATE_SETUP; + + dev_dbg(mtu->dev, "ep0: %s STALL, ep0_state: %s\n", + set ? "SEND" : "CLEAR", decode_ep0_state(mtu)); +} + +static void ep0_do_status_stage(struct mtu3 *mtu) +{ + void __iomem *mbase = mtu->mac_base; + u32 value; + + value = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS; + mtu3_writel(mbase, U3D_EP0CSR, value | EP0_SETUPPKTRDY | EP0_DATAEND); +} + +static int ep0_queue(struct mtu3_ep *mep0, struct mtu3_request *mreq); + +static void ep0_dummy_complete(struct usb_ep *ep, struct usb_request *req) +{} + +static void ep0_set_sel_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct mtu3_request *mreq; + struct mtu3 *mtu; + struct usb_set_sel_req sel; + + memcpy(&sel, req->buf, sizeof(sel)); + + mreq = to_mtu3_request(req); + mtu = mreq->mtu; + dev_dbg(mtu->dev, "u1sel:%d, u1pel:%d, u2sel:%d, u2pel:%d\n", + sel.u1_sel, sel.u1_pel, sel.u2_sel, sel.u2_pel); +} + +/* queue data stage to handle 6 byte SET_SEL request */ +static int ep0_set_sel(struct mtu3 *mtu, struct usb_ctrlrequest *setup) +{ + int ret; + u16 length = le16_to_cpu(setup->wLength); + + if (unlikely(length != 6)) { + dev_err(mtu->dev, "%s wrong wLength:%d\n", + __func__, length); + return -EINVAL; + } + + mtu->ep0_req.mep = mtu->ep0; + mtu->ep0_req.request.length = 6; + mtu->ep0_req.request.buf = mtu->setup_buf; + mtu->ep0_req.request.complete = ep0_set_sel_complete; + ret = ep0_queue(mtu->ep0, &mtu->ep0_req); + + return ret < 0 ? ret : 1; +} + +static int +ep0_get_status(struct mtu3 *mtu, const struct usb_ctrlrequest *setup) +{ + struct mtu3_ep *mep = NULL; + int handled = 1; + u8 result[2] = {0, 0}; + u8 epnum = 0; + int is_in; + + switch (setup->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + result[0] = mtu->is_self_powered << USB_DEVICE_SELF_POWERED; + result[0] |= mtu->may_wakeup << USB_DEVICE_REMOTE_WAKEUP; + + if (mtu->g.speed >= USB_SPEED_SUPER) { + result[0] |= mtu->u1_enable << USB_DEV_STAT_U1_ENABLED; + result[0] |= mtu->u2_enable << USB_DEV_STAT_U2_ENABLED; + } + + dev_dbg(mtu->dev, "%s result=%x, U1=%x, U2=%x\n", __func__, + result[0], mtu->u1_enable, mtu->u2_enable); + + break; + case USB_RECIP_INTERFACE: + /* status of function remote wakeup, forward request */ + handled = 0; + break; + case USB_RECIP_ENDPOINT: + epnum = (u8) le16_to_cpu(setup->wIndex); + is_in = epnum & USB_DIR_IN; + epnum &= USB_ENDPOINT_NUMBER_MASK; + + if (epnum >= mtu->num_eps) { + handled = -EINVAL; + break; + } + if (!epnum) + break; + + mep = (is_in ? mtu->in_eps : mtu->out_eps) + epnum; + if (!mep->desc) { + handled = -EINVAL; + break; + } + if (mep->flags & MTU3_EP_STALL) + result[0] |= 1 << USB_ENDPOINT_HALT; + + break; + default: + /* class, vendor, etc ... delegate */ + handled = 0; + break; + } + + if (handled > 0) { + int ret; + + /* prepare a data stage for GET_STATUS */ + dev_dbg(mtu->dev, "get_status=%x\n", *(u16 *)result); + memcpy(mtu->setup_buf, result, sizeof(result)); + mtu->ep0_req.mep = mtu->ep0; + mtu->ep0_req.request.length = 2; + mtu->ep0_req.request.buf = &mtu->setup_buf; + mtu->ep0_req.request.complete = ep0_dummy_complete; + ret = ep0_queue(mtu->ep0, &mtu->ep0_req); + if (ret < 0) + handled = ret; + } + return handled; +} + +static int handle_test_mode(struct mtu3 *mtu, struct usb_ctrlrequest *setup) +{ + void __iomem *mbase = mtu->mac_base; + int handled = 1; + u32 value; + + switch (le16_to_cpu(setup->wIndex) >> 8) { + case USB_TEST_J: + dev_dbg(mtu->dev, "USB_TEST_J\n"); + mtu->test_mode_nr = TEST_J_MODE; + break; + case USB_TEST_K: + dev_dbg(mtu->dev, "USB_TEST_K\n"); + mtu->test_mode_nr = TEST_K_MODE; + break; + case USB_TEST_SE0_NAK: + dev_dbg(mtu->dev, "USB_TEST_SE0_NAK\n"); + mtu->test_mode_nr = TEST_SE0_NAK_MODE; + break; + case USB_TEST_PACKET: + dev_dbg(mtu->dev, "USB_TEST_PACKET\n"); + mtu->test_mode_nr = TEST_PACKET_MODE; + break; + default: + handled = -EINVAL; + goto out; + } + + mtu->test_mode = true; + + /* no TX completion interrupt, and need restart platform after test */ + if (mtu->test_mode_nr == TEST_PACKET_MODE) + ep0_load_test_packet(mtu); + + /* send status before entering test mode. */ + ep0_do_status_stage(mtu); + + /* wait for ACK status sent by host */ + readl_poll_timeout_atomic(mbase + U3D_EP0CSR, value, + !(value & EP0_DATAEND), 100, 5000); + + mtu3_writel(mbase, U3D_USB2_TEST_MODE, mtu->test_mode_nr); + + mtu->ep0_state = MU3D_EP0_STATE_SETUP; + +out: + return handled; +} + +static int ep0_handle_feature_dev(struct mtu3 *mtu, + struct usb_ctrlrequest *setup, bool set) +{ + void __iomem *mbase = mtu->mac_base; + int handled = -EINVAL; + u32 lpc; + + switch (le16_to_cpu(setup->wValue)) { + case USB_DEVICE_REMOTE_WAKEUP: + mtu->may_wakeup = !!set; + handled = 1; + break; + case USB_DEVICE_TEST_MODE: + if (!set || (mtu->g.speed != USB_SPEED_HIGH) || + (le16_to_cpu(setup->wIndex) & 0xff)) + break; + + handled = handle_test_mode(mtu, setup); + break; + case USB_DEVICE_U1_ENABLE: + if (mtu->g.speed < USB_SPEED_SUPER || + mtu->g.state != USB_STATE_CONFIGURED) + break; + + lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL); + if (set) + lpc |= SW_U1_REQUEST_ENABLE; + else + lpc &= ~SW_U1_REQUEST_ENABLE; + mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc); + + mtu->u1_enable = !!set; + handled = 1; + break; + case USB_DEVICE_U2_ENABLE: + if (mtu->g.speed < USB_SPEED_SUPER || + mtu->g.state != USB_STATE_CONFIGURED) + break; + + lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL); + if (set) + lpc |= SW_U2_REQUEST_ENABLE; + else + lpc &= ~SW_U2_REQUEST_ENABLE; + mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc); + + mtu->u2_enable = !!set; + handled = 1; + break; + default: + handled = -EINVAL; + break; + } + return handled; +} + +static int ep0_handle_feature(struct mtu3 *mtu, + struct usb_ctrlrequest *setup, bool set) +{ + struct mtu3_ep *mep; + int handled = -EINVAL; + int is_in; + u16 value; + u16 index; + u8 epnum; + + value = le16_to_cpu(setup->wValue); + index = le16_to_cpu(setup->wIndex); + + switch (setup->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + handled = ep0_handle_feature_dev(mtu, setup, set); + break; + case USB_RECIP_INTERFACE: + /* superspeed only */ + if (value == USB_INTRF_FUNC_SUSPEND && + mtu->g.speed >= USB_SPEED_SUPER) { + /* forward the request for function suspend */ + mtu->may_wakeup = !!(index & USB_INTRF_FUNC_SUSPEND_RW); + handled = 0; + } + break; + case USB_RECIP_ENDPOINT: + epnum = index & USB_ENDPOINT_NUMBER_MASK; + if (epnum == 0 || epnum >= mtu->num_eps || + value != USB_ENDPOINT_HALT) + break; + + is_in = index & USB_DIR_IN; + mep = (is_in ? mtu->in_eps : mtu->out_eps) + epnum; + if (!mep->desc) + break; + + handled = 1; + /* ignore request if endpoint is wedged */ + if (mep->flags & MTU3_EP_WEDGE) + break; + + mtu3_ep_stall_set(mep, set); + break; + default: + /* class, vendor, etc ... delegate */ + handled = 0; + break; + } + return handled; +} + +/* + * handle all control requests can be handled + * returns: + * negative errno - error happened + * zero - need delegate SETUP to gadget driver + * positive - already handled + */ +static int handle_standard_request(struct mtu3 *mtu, + struct usb_ctrlrequest *setup) +{ + void __iomem *mbase = mtu->mac_base; + enum usb_device_state state = mtu->g.state; + int handled = -EINVAL; + u32 dev_conf; + u16 value; + + value = le16_to_cpu(setup->wValue); + + /* the gadget driver handles everything except what we must handle */ + switch (setup->bRequest) { + case USB_REQ_SET_ADDRESS: + /* change it after the status stage */ + mtu->address = (u8) (value & 0x7f); + dev_dbg(mtu->dev, "set address to 0x%x\n", mtu->address); + + dev_conf = mtu3_readl(mbase, U3D_DEVICE_CONF); + dev_conf &= ~DEV_ADDR_MSK; + dev_conf |= DEV_ADDR(mtu->address); + mtu3_writel(mbase, U3D_DEVICE_CONF, dev_conf); + + if (mtu->address) + usb_gadget_set_state(&mtu->g, USB_STATE_ADDRESS); + else + usb_gadget_set_state(&mtu->g, USB_STATE_DEFAULT); + + handled = 1; + break; + case USB_REQ_SET_CONFIGURATION: + if (state == USB_STATE_ADDRESS) { + usb_gadget_set_state(&mtu->g, + USB_STATE_CONFIGURED); + } else if (state == USB_STATE_CONFIGURED) { + /* + * USB2 spec sec 9.4.7, if wValue is 0 then dev + * is moved to addressed state + */ + if (!value) + usb_gadget_set_state(&mtu->g, + USB_STATE_ADDRESS); + } + handled = 0; + break; + case USB_REQ_CLEAR_FEATURE: + handled = ep0_handle_feature(mtu, setup, 0); + break; + case USB_REQ_SET_FEATURE: + handled = ep0_handle_feature(mtu, setup, 1); + break; + case USB_REQ_GET_STATUS: + handled = ep0_get_status(mtu, setup); + break; + case USB_REQ_SET_SEL: + handled = ep0_set_sel(mtu, setup); + break; + case USB_REQ_SET_ISOCH_DELAY: + handled = 1; + break; + default: + /* delegate SET_CONFIGURATION, etc */ + handled = 0; + } + + return handled; +} + +/* receive an data packet (OUT) */ +static void ep0_rx_state(struct mtu3 *mtu) +{ + struct mtu3_request *mreq; + struct usb_request *req; + void __iomem *mbase = mtu->mac_base; + u32 maxp; + u32 csr; + u16 count = 0; + + dev_dbg(mtu->dev, "%s\n", __func__); + + csr = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS; + mreq = next_ep0_request(mtu); + req = &mreq->request; + + /* read packet and ack; or stall because of gadget driver bug */ + if (req) { + void *buf = req->buf + req->actual; + unsigned int len = req->length - req->actual; + + /* read the buffer */ + count = mtu3_readl(mbase, U3D_RXCOUNT0); + if (count > len) { + req->status = -EOVERFLOW; + count = len; + } + ep0_read_fifo(mtu->ep0, buf, count); + req->actual += count; + csr |= EP0_RXPKTRDY; + + maxp = mtu->g.ep0->maxpacket; + if (count < maxp || req->actual == req->length) { + mtu->ep0_state = MU3D_EP0_STATE_SETUP; + dev_dbg(mtu->dev, "ep0 state: %s\n", + decode_ep0_state(mtu)); + + csr |= EP0_DATAEND; + } else { + req = NULL; + } + } else { + csr |= EP0_RXPKTRDY | EP0_SENDSTALL; + dev_dbg(mtu->dev, "%s: SENDSTALL\n", __func__); + } + + mtu3_writel(mbase, U3D_EP0CSR, csr); + + /* give back the request if have received all data */ + if (req) + ep0_req_giveback(mtu, req); + +} + +/* transmitting to the host (IN) */ +static void ep0_tx_state(struct mtu3 *mtu) +{ + struct mtu3_request *mreq = next_ep0_request(mtu); + struct usb_request *req; + u32 csr; + u8 *src; + u32 count; + u32 maxp; + + dev_dbg(mtu->dev, "%s\n", __func__); + + if (!mreq) + return; + + maxp = mtu->g.ep0->maxpacket; + req = &mreq->request; + + /* load the data */ + src = (u8 *)req->buf + req->actual; + count = min(maxp, req->length - req->actual); + if (count) + ep0_write_fifo(mtu->ep0, src, count); + + dev_dbg(mtu->dev, "%s act=%d, len=%d, cnt=%d, maxp=%d zero=%d\n", + __func__, req->actual, req->length, count, maxp, req->zero); + + req->actual += count; + + if ((count < maxp) + || ((req->actual == req->length) && !req->zero)) + mtu->ep0_state = MU3D_EP0_STATE_TX_END; + + /* send it out, triggering a "txpktrdy cleared" irq */ + csr = mtu3_readl(mtu->mac_base, U3D_EP0CSR) & EP0_W1C_BITS; + mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr | EP0_TXPKTRDY); + + dev_dbg(mtu->dev, "%s ep0csr=0x%x\n", __func__, + mtu3_readl(mtu->mac_base, U3D_EP0CSR)); +} + +static void ep0_read_setup(struct mtu3 *mtu, struct usb_ctrlrequest *setup) +{ + struct mtu3_request *mreq; + u32 count; + u32 csr; + + csr = mtu3_readl(mtu->mac_base, U3D_EP0CSR) & EP0_W1C_BITS; + count = mtu3_readl(mtu->mac_base, U3D_RXCOUNT0); + + ep0_read_fifo(mtu->ep0, (u8 *)setup, count); + + dev_dbg(mtu->dev, "SETUP req%02x.%02x v%04x i%04x l%04x\n", + setup->bRequestType, setup->bRequest, + le16_to_cpu(setup->wValue), le16_to_cpu(setup->wIndex), + le16_to_cpu(setup->wLength)); + + /* clean up any leftover transfers */ + mreq = next_ep0_request(mtu); + if (mreq) + ep0_req_giveback(mtu, &mreq->request); + + if (le16_to_cpu(setup->wLength) == 0) { + ; /* no data stage, nothing to do */ + } else if (setup->bRequestType & USB_DIR_IN) { + mtu3_writel(mtu->mac_base, U3D_EP0CSR, + csr | EP0_SETUPPKTRDY | EP0_DPHTX); + mtu->ep0_state = MU3D_EP0_STATE_TX; + } else { + mtu3_writel(mtu->mac_base, U3D_EP0CSR, + (csr | EP0_SETUPPKTRDY) & (~EP0_DPHTX)); + mtu->ep0_state = MU3D_EP0_STATE_RX; + } +} + +static int ep0_handle_setup(struct mtu3 *mtu) +__releases(mtu->lock) +__acquires(mtu->lock) +{ + struct usb_ctrlrequest setup; + struct mtu3_request *mreq; + int handled = 0; + + ep0_read_setup(mtu, &setup); + trace_mtu3_handle_setup(&setup); + + if ((setup.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) + handled = handle_standard_request(mtu, &setup); + + dev_dbg(mtu->dev, "handled %d, ep0_state: %s\n", + handled, decode_ep0_state(mtu)); + + if (handled < 0) + goto stall; + else if (handled > 0) + goto finish; + + handled = forward_to_driver(mtu, &setup); + if (handled < 0) { +stall: + dev_dbg(mtu->dev, "%s stall (%d)\n", __func__, handled); + + ep0_stall_set(mtu->ep0, true, + le16_to_cpu(setup.wLength) ? 0 : EP0_SETUPPKTRDY); + + return 0; + } + +finish: + if (mtu->test_mode) { + ; /* nothing to do */ + } else if (handled == USB_GADGET_DELAYED_STATUS) { + + mreq = next_ep0_request(mtu); + if (mreq) { + /* already asked us to continue delayed status */ + ep0_do_status_stage(mtu); + ep0_req_giveback(mtu, &mreq->request); + } else { + /* do delayed STATUS stage till receive ep0_queue */ + mtu->delayed_status = true; + } + } else if (le16_to_cpu(setup.wLength) == 0) { /* no data stage */ + + ep0_do_status_stage(mtu); + /* complete zlp request directly */ + mreq = next_ep0_request(mtu); + if (mreq && !mreq->request.length) + ep0_req_giveback(mtu, &mreq->request); + } + + return 0; +} + +irqreturn_t mtu3_ep0_isr(struct mtu3 *mtu) +{ + void __iomem *mbase = mtu->mac_base; + struct mtu3_request *mreq; + u32 int_status; + irqreturn_t ret = IRQ_NONE; + u32 csr; + u32 len; + + int_status = mtu3_readl(mbase, U3D_EPISR); + int_status &= mtu3_readl(mbase, U3D_EPIER); + mtu3_writel(mbase, U3D_EPISR, int_status); /* W1C */ + + /* only handle ep0's */ + if (!(int_status & (EP0ISR | SETUPENDISR))) + return IRQ_NONE; + + /* abort current SETUP, and process new one */ + if (int_status & SETUPENDISR) + mtu->ep0_state = MU3D_EP0_STATE_SETUP; + + csr = mtu3_readl(mbase, U3D_EP0CSR); + + dev_dbg(mtu->dev, "%s csr=0x%x\n", __func__, csr); + + /* we sent a stall.. need to clear it now.. */ + if (csr & EP0_SENTSTALL) { + ep0_stall_set(mtu->ep0, false, 0); + csr = mtu3_readl(mbase, U3D_EP0CSR); + ret = IRQ_HANDLED; + } + dev_dbg(mtu->dev, "ep0_state: %s\n", decode_ep0_state(mtu)); + mtu3_dbg_trace(mtu->dev, "ep0_state %s", decode_ep0_state(mtu)); + + switch (mtu->ep0_state) { + case MU3D_EP0_STATE_TX: + /* irq on clearing txpktrdy */ + if ((csr & EP0_FIFOFULL) == 0) { + ep0_tx_state(mtu); + ret = IRQ_HANDLED; + } + break; + case MU3D_EP0_STATE_RX: + /* irq on set rxpktrdy */ + if (csr & EP0_RXPKTRDY) { + ep0_rx_state(mtu); + ret = IRQ_HANDLED; + } + break; + case MU3D_EP0_STATE_TX_END: + mtu3_writel(mbase, U3D_EP0CSR, + (csr & EP0_W1C_BITS) | EP0_DATAEND); + + mreq = next_ep0_request(mtu); + if (mreq) + ep0_req_giveback(mtu, &mreq->request); + + mtu->ep0_state = MU3D_EP0_STATE_SETUP; + ret = IRQ_HANDLED; + dev_dbg(mtu->dev, "ep0_state: %s\n", decode_ep0_state(mtu)); + break; + case MU3D_EP0_STATE_SETUP: + if (!(csr & EP0_SETUPPKTRDY)) + break; + + len = mtu3_readl(mbase, U3D_RXCOUNT0); + if (len != 8) { + dev_err(mtu->dev, "SETUP packet len %d != 8 ?\n", len); + break; + } + + ep0_handle_setup(mtu); + ret = IRQ_HANDLED; + break; + default: + /* can't happen */ + ep0_stall_set(mtu->ep0, true, 0); + WARN_ON(1); + break; + } + + return ret; +} + + +static int mtu3_ep0_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + /* always enabled */ + return -EINVAL; +} + +static int mtu3_ep0_disable(struct usb_ep *ep) +{ + /* always enabled */ + return -EINVAL; +} + +static int ep0_queue(struct mtu3_ep *mep, struct mtu3_request *mreq) +{ + struct mtu3 *mtu = mep->mtu; + + mreq->mtu = mtu; + mreq->request.actual = 0; + mreq->request.status = -EINPROGRESS; + + dev_dbg(mtu->dev, "%s %s (ep0_state: %s), len#%d\n", __func__, + mep->name, decode_ep0_state(mtu), mreq->request.length); + + switch (mtu->ep0_state) { + case MU3D_EP0_STATE_SETUP: + case MU3D_EP0_STATE_RX: /* control-OUT data */ + case MU3D_EP0_STATE_TX: /* control-IN data */ + break; + default: + dev_err(mtu->dev, "%s, error in ep0 state %s\n", __func__, + decode_ep0_state(mtu)); + return -EINVAL; + } + + if (mtu->delayed_status) { + + mtu->delayed_status = false; + ep0_do_status_stage(mtu); + /* needn't giveback the request for handling delay STATUS */ + return 0; + } + + if (!list_empty(&mep->req_list)) + return -EBUSY; + + list_add_tail(&mreq->list, &mep->req_list); + + /* sequence #1, IN ... start writing the data */ + if (mtu->ep0_state == MU3D_EP0_STATE_TX) + ep0_tx_state(mtu); + + return 0; +} + +static int mtu3_ep0_queue(struct usb_ep *ep, + struct usb_request *req, gfp_t gfp) +{ + struct mtu3_ep *mep; + struct mtu3_request *mreq; + struct mtu3 *mtu; + unsigned long flags; + int ret = 0; + + if (!ep || !req) + return -EINVAL; + + mep = to_mtu3_ep(ep); + mtu = mep->mtu; + mreq = to_mtu3_request(req); + + spin_lock_irqsave(&mtu->lock, flags); + ret = ep0_queue(mep, mreq); + spin_unlock_irqrestore(&mtu->lock, flags); + return ret; +} + +static int mtu3_ep0_dequeue(struct usb_ep *ep, struct usb_request *req) +{ + /* we just won't support this */ + return -EINVAL; +} + +static int mtu3_ep0_halt(struct usb_ep *ep, int value) +{ + struct mtu3_ep *mep; + struct mtu3 *mtu; + unsigned long flags; + int ret = 0; + + if (!ep || !value) + return -EINVAL; + + mep = to_mtu3_ep(ep); + mtu = mep->mtu; + + dev_dbg(mtu->dev, "%s\n", __func__); + + spin_lock_irqsave(&mtu->lock, flags); + + if (!list_empty(&mep->req_list)) { + ret = -EBUSY; + goto cleanup; + } + + switch (mtu->ep0_state) { + /* + * stalls are usually issued after parsing SETUP packet, either + * directly in irq context from setup() or else later. + */ + case MU3D_EP0_STATE_TX: + case MU3D_EP0_STATE_TX_END: + case MU3D_EP0_STATE_RX: + case MU3D_EP0_STATE_SETUP: + ep0_stall_set(mtu->ep0, true, 0); + break; + default: + dev_dbg(mtu->dev, "ep0 can't halt in state %s\n", + decode_ep0_state(mtu)); + ret = -EINVAL; + } + +cleanup: + spin_unlock_irqrestore(&mtu->lock, flags); + return ret; +} + +const struct usb_ep_ops mtu3_ep0_ops = { + .enable = mtu3_ep0_enable, + .disable = mtu3_ep0_disable, + .alloc_request = mtu3_alloc_request, + .free_request = mtu3_free_request, + .queue = mtu3_ep0_queue, + .dequeue = mtu3_ep0_dequeue, + .set_halt = mtu3_ep0_halt, +}; -- cgit v1.2.3