From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/usb/serial/digi_acceleport.c | 1534 ++++++++++++++++++++++++++++++++++ 1 file changed, 1534 insertions(+) create mode 100644 drivers/usb/serial/digi_acceleport.c (limited to 'drivers/usb/serial/digi_acceleport.c') diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c new file mode 100644 index 000000000..45d688e9b --- /dev/null +++ b/drivers/usb/serial/digi_acceleport.c @@ -0,0 +1,1534 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Digi AccelePort USB-4 and USB-2 Serial Converters +* +* Copyright 2000 by Digi International +* +* Shamelessly based on Brian Warner's keyspan_pda.c and Greg Kroah-Hartman's +* usb-serial driver. +* +* Peter Berger (pberger@brimson.com) +* Al Borchers (borchers@steinerpoint.com) +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Defines */ + +#define DRIVER_AUTHOR "Peter Berger , Al Borchers " +#define DRIVER_DESC "Digi AccelePort USB-2/USB-4 Serial Converter driver" + +/* port output buffer length -- must be <= transfer buffer length - 2 */ +/* so we can be sure to send the full buffer in one urb */ +#define DIGI_OUT_BUF_SIZE 8 + +/* port input buffer length -- must be >= transfer buffer length - 3 */ +/* so we can be sure to hold at least one full buffer from one urb */ +#define DIGI_IN_BUF_SIZE 64 + +/* retry timeout while sleeping */ +#define DIGI_RETRY_TIMEOUT (HZ/10) + +/* timeout while waiting for tty output to drain in close */ +/* this delay is used twice in close, so the total delay could */ +/* be twice this value */ +#define DIGI_CLOSE_TIMEOUT (5*HZ) + + +/* AccelePort USB Defines */ + +/* ids */ +#define DIGI_VENDOR_ID 0x05c5 +#define DIGI_2_ID 0x0002 /* USB-2 */ +#define DIGI_4_ID 0x0004 /* USB-4 */ + +/* commands + * "INB": can be used on the in-band endpoint + * "OOB": can be used on the out-of-band endpoint + */ +#define DIGI_CMD_SET_BAUD_RATE 0 /* INB, OOB */ +#define DIGI_CMD_SET_WORD_SIZE 1 /* INB, OOB */ +#define DIGI_CMD_SET_PARITY 2 /* INB, OOB */ +#define DIGI_CMD_SET_STOP_BITS 3 /* INB, OOB */ +#define DIGI_CMD_SET_INPUT_FLOW_CONTROL 4 /* INB, OOB */ +#define DIGI_CMD_SET_OUTPUT_FLOW_CONTROL 5 /* INB, OOB */ +#define DIGI_CMD_SET_DTR_SIGNAL 6 /* INB, OOB */ +#define DIGI_CMD_SET_RTS_SIGNAL 7 /* INB, OOB */ +#define DIGI_CMD_READ_INPUT_SIGNALS 8 /* OOB */ +#define DIGI_CMD_IFLUSH_FIFO 9 /* OOB */ +#define DIGI_CMD_RECEIVE_ENABLE 10 /* INB, OOB */ +#define DIGI_CMD_BREAK_CONTROL 11 /* INB, OOB */ +#define DIGI_CMD_LOCAL_LOOPBACK 12 /* INB, OOB */ +#define DIGI_CMD_TRANSMIT_IDLE 13 /* INB, OOB */ +#define DIGI_CMD_READ_UART_REGISTER 14 /* OOB */ +#define DIGI_CMD_WRITE_UART_REGISTER 15 /* INB, OOB */ +#define DIGI_CMD_AND_UART_REGISTER 16 /* INB, OOB */ +#define DIGI_CMD_OR_UART_REGISTER 17 /* INB, OOB */ +#define DIGI_CMD_SEND_DATA 18 /* INB */ +#define DIGI_CMD_RECEIVE_DATA 19 /* INB */ +#define DIGI_CMD_RECEIVE_DISABLE 20 /* INB */ +#define DIGI_CMD_GET_PORT_TYPE 21 /* OOB */ + +/* baud rates */ +#define DIGI_BAUD_50 0 +#define DIGI_BAUD_75 1 +#define DIGI_BAUD_110 2 +#define DIGI_BAUD_150 3 +#define DIGI_BAUD_200 4 +#define DIGI_BAUD_300 5 +#define DIGI_BAUD_600 6 +#define DIGI_BAUD_1200 7 +#define DIGI_BAUD_1800 8 +#define DIGI_BAUD_2400 9 +#define DIGI_BAUD_4800 10 +#define DIGI_BAUD_7200 11 +#define DIGI_BAUD_9600 12 +#define DIGI_BAUD_14400 13 +#define DIGI_BAUD_19200 14 +#define DIGI_BAUD_28800 15 +#define DIGI_BAUD_38400 16 +#define DIGI_BAUD_57600 17 +#define DIGI_BAUD_76800 18 +#define DIGI_BAUD_115200 19 +#define DIGI_BAUD_153600 20 +#define DIGI_BAUD_230400 21 +#define DIGI_BAUD_460800 22 + +/* arguments */ +#define DIGI_WORD_SIZE_5 0 +#define DIGI_WORD_SIZE_6 1 +#define DIGI_WORD_SIZE_7 2 +#define DIGI_WORD_SIZE_8 3 + +#define DIGI_PARITY_NONE 0 +#define DIGI_PARITY_ODD 1 +#define DIGI_PARITY_EVEN 2 +#define DIGI_PARITY_MARK 3 +#define DIGI_PARITY_SPACE 4 + +#define DIGI_STOP_BITS_1 0 +#define DIGI_STOP_BITS_2 1 + +#define DIGI_INPUT_FLOW_CONTROL_XON_XOFF 1 +#define DIGI_INPUT_FLOW_CONTROL_RTS 2 +#define DIGI_INPUT_FLOW_CONTROL_DTR 4 + +#define DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF 1 +#define DIGI_OUTPUT_FLOW_CONTROL_CTS 2 +#define DIGI_OUTPUT_FLOW_CONTROL_DSR 4 + +#define DIGI_DTR_INACTIVE 0 +#define DIGI_DTR_ACTIVE 1 +#define DIGI_DTR_INPUT_FLOW_CONTROL 2 + +#define DIGI_RTS_INACTIVE 0 +#define DIGI_RTS_ACTIVE 1 +#define DIGI_RTS_INPUT_FLOW_CONTROL 2 +#define DIGI_RTS_TOGGLE 3 + +#define DIGI_FLUSH_TX 1 +#define DIGI_FLUSH_RX 2 +#define DIGI_RESUME_TX 4 /* clears xoff condition */ + +#define DIGI_TRANSMIT_NOT_IDLE 0 +#define DIGI_TRANSMIT_IDLE 1 + +#define DIGI_DISABLE 0 +#define DIGI_ENABLE 1 + +#define DIGI_DEASSERT 0 +#define DIGI_ASSERT 1 + +/* in band status codes */ +#define DIGI_OVERRUN_ERROR 4 +#define DIGI_PARITY_ERROR 8 +#define DIGI_FRAMING_ERROR 16 +#define DIGI_BREAK_ERROR 32 + +/* out of band status */ +#define DIGI_NO_ERROR 0 +#define DIGI_BAD_FIRST_PARAMETER 1 +#define DIGI_BAD_SECOND_PARAMETER 2 +#define DIGI_INVALID_LINE 3 +#define DIGI_INVALID_OPCODE 4 + +/* input signals */ +#define DIGI_READ_INPUT_SIGNALS_SLOT 1 +#define DIGI_READ_INPUT_SIGNALS_ERR 2 +#define DIGI_READ_INPUT_SIGNALS_BUSY 4 +#define DIGI_READ_INPUT_SIGNALS_PE 8 +#define DIGI_READ_INPUT_SIGNALS_CTS 16 +#define DIGI_READ_INPUT_SIGNALS_DSR 32 +#define DIGI_READ_INPUT_SIGNALS_RI 64 +#define DIGI_READ_INPUT_SIGNALS_DCD 128 + + +/* Structures */ + +struct digi_serial { + spinlock_t ds_serial_lock; + struct usb_serial_port *ds_oob_port; /* out-of-band port */ + int ds_oob_port_num; /* index of out-of-band port */ + int ds_device_started; +}; + +struct digi_port { + spinlock_t dp_port_lock; + int dp_port_num; + int dp_out_buf_len; + unsigned char dp_out_buf[DIGI_OUT_BUF_SIZE]; + int dp_write_urb_in_use; + unsigned int dp_modem_signals; + int dp_transmit_idle; + wait_queue_head_t dp_transmit_idle_wait; + int dp_throttled; + int dp_throttle_restart; + wait_queue_head_t dp_flush_wait; + wait_queue_head_t dp_close_wait; /* wait queue for close */ + wait_queue_head_t write_wait; + struct usb_serial_port *dp_port; +}; + + +/* Local Function Declarations */ + +static int digi_write_oob_command(struct usb_serial_port *port, + unsigned char *buf, int count, int interruptible); +static int digi_write_inb_command(struct usb_serial_port *port, + unsigned char *buf, int count, unsigned long timeout); +static int digi_set_modem_signals(struct usb_serial_port *port, + unsigned int modem_signals, int interruptible); +static int digi_transmit_idle(struct usb_serial_port *port, + unsigned long timeout); +static void digi_rx_throttle(struct tty_struct *tty); +static void digi_rx_unthrottle(struct tty_struct *tty); +static void digi_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + const struct ktermios *old_termios); +static void digi_break_ctl(struct tty_struct *tty, int break_state); +static int digi_tiocmget(struct tty_struct *tty); +static int digi_tiocmset(struct tty_struct *tty, unsigned int set, + unsigned int clear); +static int digi_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); +static void digi_write_bulk_callback(struct urb *urb); +static unsigned int digi_write_room(struct tty_struct *tty); +static unsigned int digi_chars_in_buffer(struct tty_struct *tty); +static int digi_open(struct tty_struct *tty, struct usb_serial_port *port); +static void digi_close(struct usb_serial_port *port); +static void digi_dtr_rts(struct usb_serial_port *port, int on); +static int digi_startup_device(struct usb_serial *serial); +static int digi_startup(struct usb_serial *serial); +static void digi_disconnect(struct usb_serial *serial); +static void digi_release(struct usb_serial *serial); +static int digi_port_probe(struct usb_serial_port *port); +static void digi_port_remove(struct usb_serial_port *port); +static void digi_read_bulk_callback(struct urb *urb); +static int digi_read_inb_callback(struct urb *urb); +static int digi_read_oob_callback(struct urb *urb); + + +static const struct usb_device_id id_table_combined[] = { + { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) }, + { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id id_table_2[] = { + { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id id_table_4[] = { + { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table_combined); + +/* device info needed for the Digi serial converter */ + +static struct usb_serial_driver digi_acceleport_2_device = { + .driver = { + .owner = THIS_MODULE, + .name = "digi_2", + }, + .description = "Digi 2 port USB adapter", + .id_table = id_table_2, + .num_ports = 3, + .num_bulk_in = 4, + .num_bulk_out = 4, + .open = digi_open, + .close = digi_close, + .dtr_rts = digi_dtr_rts, + .write = digi_write, + .write_room = digi_write_room, + .write_bulk_callback = digi_write_bulk_callback, + .read_bulk_callback = digi_read_bulk_callback, + .chars_in_buffer = digi_chars_in_buffer, + .throttle = digi_rx_throttle, + .unthrottle = digi_rx_unthrottle, + .set_termios = digi_set_termios, + .break_ctl = digi_break_ctl, + .tiocmget = digi_tiocmget, + .tiocmset = digi_tiocmset, + .attach = digi_startup, + .disconnect = digi_disconnect, + .release = digi_release, + .port_probe = digi_port_probe, + .port_remove = digi_port_remove, +}; + +static struct usb_serial_driver digi_acceleport_4_device = { + .driver = { + .owner = THIS_MODULE, + .name = "digi_4", + }, + .description = "Digi 4 port USB adapter", + .id_table = id_table_4, + .num_ports = 4, + .num_bulk_in = 5, + .num_bulk_out = 5, + .open = digi_open, + .close = digi_close, + .write = digi_write, + .write_room = digi_write_room, + .write_bulk_callback = digi_write_bulk_callback, + .read_bulk_callback = digi_read_bulk_callback, + .chars_in_buffer = digi_chars_in_buffer, + .throttle = digi_rx_throttle, + .unthrottle = digi_rx_unthrottle, + .set_termios = digi_set_termios, + .break_ctl = digi_break_ctl, + .tiocmget = digi_tiocmget, + .tiocmset = digi_tiocmset, + .attach = digi_startup, + .disconnect = digi_disconnect, + .release = digi_release, + .port_probe = digi_port_probe, + .port_remove = digi_port_remove, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &digi_acceleport_2_device, &digi_acceleport_4_device, NULL +}; + +/* Functions */ + +/* + * Cond Wait Interruptible Timeout Irqrestore + * + * Do spin_unlock_irqrestore and interruptible_sleep_on_timeout + * so that wake ups are not lost if they occur between the unlock + * and the sleep. In other words, spin_unlock_irqrestore and + * interruptible_sleep_on_timeout are "atomic" with respect to + * wake ups. This is used to implement condition variables. + * + * interruptible_sleep_on_timeout is deprecated and has been replaced + * with the equivalent code. + */ + +static long cond_wait_interruptible_timeout_irqrestore( + wait_queue_head_t *q, long timeout, + spinlock_t *lock, unsigned long flags) +__releases(lock) +{ + DEFINE_WAIT(wait); + + prepare_to_wait(q, &wait, TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(lock, flags); + timeout = schedule_timeout(timeout); + finish_wait(q, &wait); + + return timeout; +} + +/* + * Digi Write OOB Command + * + * Write commands on the out of band port. Commands are 4 + * bytes each, multiple commands can be sent at once, and + * no command will be split across USB packets. Returns 0 + * if successful, -EINTR if interrupted while sleeping and + * the interruptible flag is true, or a negative error + * returned by usb_submit_urb. + */ + +static int digi_write_oob_command(struct usb_serial_port *port, + unsigned char *buf, int count, int interruptible) +{ + int ret = 0; + int len; + struct usb_serial_port *oob_port = (struct usb_serial_port *)((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port; + struct digi_port *oob_priv = usb_get_serial_port_data(oob_port); + unsigned long flags; + + dev_dbg(&port->dev, + "digi_write_oob_command: TOP: port=%d, count=%d\n", + oob_priv->dp_port_num, count); + + spin_lock_irqsave(&oob_priv->dp_port_lock, flags); + while (count > 0) { + while (oob_priv->dp_write_urb_in_use) { + cond_wait_interruptible_timeout_irqrestore( + &oob_priv->write_wait, DIGI_RETRY_TIMEOUT, + &oob_priv->dp_port_lock, flags); + if (interruptible && signal_pending(current)) + return -EINTR; + spin_lock_irqsave(&oob_priv->dp_port_lock, flags); + } + + /* len must be a multiple of 4, so commands are not split */ + len = min(count, oob_port->bulk_out_size); + if (len > 4) + len &= ~3; + memcpy(oob_port->write_urb->transfer_buffer, buf, len); + oob_port->write_urb->transfer_buffer_length = len; + ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC); + if (ret == 0) { + oob_priv->dp_write_urb_in_use = 1; + count -= len; + buf += len; + } + } + spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags); + if (ret) + dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n", + __func__, ret); + return ret; + +} + + +/* + * Digi Write In Band Command + * + * Write commands on the given port. Commands are 4 + * bytes each, multiple commands can be sent at once, and + * no command will be split across USB packets. If timeout + * is non-zero, write in band command will return after + * waiting unsuccessfully for the URB status to clear for + * timeout ticks. Returns 0 if successful, or a negative + * error returned by digi_write. + */ + +static int digi_write_inb_command(struct usb_serial_port *port, + unsigned char *buf, int count, unsigned long timeout) +{ + int ret = 0; + int len; + struct digi_port *priv = usb_get_serial_port_data(port); + unsigned char *data = port->write_urb->transfer_buffer; + unsigned long flags; + + dev_dbg(&port->dev, "digi_write_inb_command: TOP: port=%d, count=%d\n", + priv->dp_port_num, count); + + if (timeout) + timeout += jiffies; + else + timeout = ULONG_MAX; + + spin_lock_irqsave(&priv->dp_port_lock, flags); + while (count > 0 && ret == 0) { + while (priv->dp_write_urb_in_use && + time_before(jiffies, timeout)) { + cond_wait_interruptible_timeout_irqrestore( + &priv->write_wait, DIGI_RETRY_TIMEOUT, + &priv->dp_port_lock, flags); + if (signal_pending(current)) + return -EINTR; + spin_lock_irqsave(&priv->dp_port_lock, flags); + } + + /* len must be a multiple of 4 and small enough to */ + /* guarantee the write will send buffered data first, */ + /* so commands are in order with data and not split */ + len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len); + if (len > 4) + len &= ~3; + + /* write any buffered data first */ + if (priv->dp_out_buf_len > 0) { + data[0] = DIGI_CMD_SEND_DATA; + data[1] = priv->dp_out_buf_len; + memcpy(data + 2, priv->dp_out_buf, + priv->dp_out_buf_len); + memcpy(data + 2 + priv->dp_out_buf_len, buf, len); + port->write_urb->transfer_buffer_length + = priv->dp_out_buf_len + 2 + len; + } else { + memcpy(data, buf, len); + port->write_urb->transfer_buffer_length = len; + } + + ret = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (ret == 0) { + priv->dp_write_urb_in_use = 1; + priv->dp_out_buf_len = 0; + count -= len; + buf += len; + } + + } + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + + if (ret) + dev_err(&port->dev, + "%s: usb_submit_urb failed, ret=%d, port=%d\n", + __func__, ret, priv->dp_port_num); + return ret; +} + + +/* + * Digi Set Modem Signals + * + * Sets or clears DTR and RTS on the port, according to the + * modem_signals argument. Use TIOCM_DTR and TIOCM_RTS flags + * for the modem_signals argument. Returns 0 if successful, + * -EINTR if interrupted while sleeping, or a non-zero error + * returned by usb_submit_urb. + */ + +static int digi_set_modem_signals(struct usb_serial_port *port, + unsigned int modem_signals, int interruptible) +{ + + int ret; + struct digi_port *port_priv = usb_get_serial_port_data(port); + struct usb_serial_port *oob_port = (struct usb_serial_port *) ((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port; + struct digi_port *oob_priv = usb_get_serial_port_data(oob_port); + unsigned char *data = oob_port->write_urb->transfer_buffer; + unsigned long flags; + + dev_dbg(&port->dev, + "digi_set_modem_signals: TOP: port=%d, modem_signals=0x%x\n", + port_priv->dp_port_num, modem_signals); + + spin_lock_irqsave(&oob_priv->dp_port_lock, flags); + spin_lock(&port_priv->dp_port_lock); + + while (oob_priv->dp_write_urb_in_use) { + spin_unlock(&port_priv->dp_port_lock); + cond_wait_interruptible_timeout_irqrestore( + &oob_priv->write_wait, DIGI_RETRY_TIMEOUT, + &oob_priv->dp_port_lock, flags); + if (interruptible && signal_pending(current)) + return -EINTR; + spin_lock_irqsave(&oob_priv->dp_port_lock, flags); + spin_lock(&port_priv->dp_port_lock); + } + data[0] = DIGI_CMD_SET_DTR_SIGNAL; + data[1] = port_priv->dp_port_num; + data[2] = (modem_signals & TIOCM_DTR) ? + DIGI_DTR_ACTIVE : DIGI_DTR_INACTIVE; + data[3] = 0; + data[4] = DIGI_CMD_SET_RTS_SIGNAL; + data[5] = port_priv->dp_port_num; + data[6] = (modem_signals & TIOCM_RTS) ? + DIGI_RTS_ACTIVE : DIGI_RTS_INACTIVE; + data[7] = 0; + + oob_port->write_urb->transfer_buffer_length = 8; + + ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC); + if (ret == 0) { + oob_priv->dp_write_urb_in_use = 1; + port_priv->dp_modem_signals &= ~(TIOCM_DTR | TIOCM_RTS); + port_priv->dp_modem_signals |= + modem_signals & (TIOCM_DTR | TIOCM_RTS); + } + spin_unlock(&port_priv->dp_port_lock); + spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags); + if (ret) + dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n", + __func__, ret); + return ret; +} + +/* + * Digi Transmit Idle + * + * Digi transmit idle waits, up to timeout ticks, for the transmitter + * to go idle. It returns 0 if successful or a negative error. + * + * There are race conditions here if more than one process is calling + * digi_transmit_idle on the same port at the same time. However, this + * is only called from close, and only one process can be in close on a + * port at a time, so its ok. + */ + +static int digi_transmit_idle(struct usb_serial_port *port, + unsigned long timeout) +{ + int ret; + unsigned char buf[2]; + struct digi_port *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->dp_port_lock, flags); + priv->dp_transmit_idle = 0; + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + + buf[0] = DIGI_CMD_TRANSMIT_IDLE; + buf[1] = 0; + + timeout += jiffies; + + ret = digi_write_inb_command(port, buf, 2, timeout - jiffies); + if (ret != 0) + return ret; + + spin_lock_irqsave(&priv->dp_port_lock, flags); + + while (time_before(jiffies, timeout) && !priv->dp_transmit_idle) { + cond_wait_interruptible_timeout_irqrestore( + &priv->dp_transmit_idle_wait, DIGI_RETRY_TIMEOUT, + &priv->dp_port_lock, flags); + if (signal_pending(current)) + return -EINTR; + spin_lock_irqsave(&priv->dp_port_lock, flags); + } + priv->dp_transmit_idle = 0; + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + return 0; + +} + + +static void digi_rx_throttle(struct tty_struct *tty) +{ + unsigned long flags; + struct usb_serial_port *port = tty->driver_data; + struct digi_port *priv = usb_get_serial_port_data(port); + + /* stop receiving characters by not resubmitting the read urb */ + spin_lock_irqsave(&priv->dp_port_lock, flags); + priv->dp_throttled = 1; + priv->dp_throttle_restart = 0; + spin_unlock_irqrestore(&priv->dp_port_lock, flags); +} + + +static void digi_rx_unthrottle(struct tty_struct *tty) +{ + int ret = 0; + unsigned long flags; + struct usb_serial_port *port = tty->driver_data; + struct digi_port *priv = usb_get_serial_port_data(port); + + spin_lock_irqsave(&priv->dp_port_lock, flags); + + /* restart read chain */ + if (priv->dp_throttle_restart) + ret = usb_submit_urb(port->read_urb, GFP_ATOMIC); + + /* turn throttle off */ + priv->dp_throttled = 0; + priv->dp_throttle_restart = 0; + + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + + if (ret) + dev_err(&port->dev, + "%s: usb_submit_urb failed, ret=%d, port=%d\n", + __func__, ret, priv->dp_port_num); +} + + +static void digi_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + const struct ktermios *old_termios) +{ + struct digi_port *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; + unsigned int iflag = tty->termios.c_iflag; + unsigned int cflag = tty->termios.c_cflag; + unsigned int old_iflag = old_termios->c_iflag; + unsigned int old_cflag = old_termios->c_cflag; + unsigned char buf[32]; + unsigned int modem_signals; + int arg, ret; + int i = 0; + speed_t baud; + + dev_dbg(dev, + "digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x\n", + priv->dp_port_num, iflag, old_iflag, cflag, old_cflag); + + /* set baud rate */ + baud = tty_get_baud_rate(tty); + if (baud != tty_termios_baud_rate(old_termios)) { + arg = -1; + + /* reassert DTR and (maybe) RTS on transition from B0 */ + if ((old_cflag & CBAUD) == B0) { + /* don't set RTS if using hardware flow control */ + /* and throttling input */ + modem_signals = TIOCM_DTR; + if (!C_CRTSCTS(tty) || !tty_throttled(tty)) + modem_signals |= TIOCM_RTS; + digi_set_modem_signals(port, modem_signals, 1); + } + switch (baud) { + /* drop DTR and RTS on transition to B0 */ + case 0: digi_set_modem_signals(port, 0, 1); break; + case 50: arg = DIGI_BAUD_50; break; + case 75: arg = DIGI_BAUD_75; break; + case 110: arg = DIGI_BAUD_110; break; + case 150: arg = DIGI_BAUD_150; break; + case 200: arg = DIGI_BAUD_200; break; + case 300: arg = DIGI_BAUD_300; break; + case 600: arg = DIGI_BAUD_600; break; + case 1200: arg = DIGI_BAUD_1200; break; + case 1800: arg = DIGI_BAUD_1800; break; + case 2400: arg = DIGI_BAUD_2400; break; + case 4800: arg = DIGI_BAUD_4800; break; + case 9600: arg = DIGI_BAUD_9600; break; + case 19200: arg = DIGI_BAUD_19200; break; + case 38400: arg = DIGI_BAUD_38400; break; + case 57600: arg = DIGI_BAUD_57600; break; + case 115200: arg = DIGI_BAUD_115200; break; + case 230400: arg = DIGI_BAUD_230400; break; + case 460800: arg = DIGI_BAUD_460800; break; + default: + arg = DIGI_BAUD_9600; + baud = 9600; + break; + } + if (arg != -1) { + buf[i++] = DIGI_CMD_SET_BAUD_RATE; + buf[i++] = priv->dp_port_num; + buf[i++] = arg; + buf[i++] = 0; + } + } + /* set parity */ + tty->termios.c_cflag &= ~CMSPAR; + + if ((cflag & (PARENB | PARODD)) != (old_cflag & (PARENB | PARODD))) { + if (cflag & PARENB) { + if (cflag & PARODD) + arg = DIGI_PARITY_ODD; + else + arg = DIGI_PARITY_EVEN; + } else { + arg = DIGI_PARITY_NONE; + } + buf[i++] = DIGI_CMD_SET_PARITY; + buf[i++] = priv->dp_port_num; + buf[i++] = arg; + buf[i++] = 0; + } + /* set word size */ + if ((cflag & CSIZE) != (old_cflag & CSIZE)) { + arg = -1; + switch (cflag & CSIZE) { + case CS5: arg = DIGI_WORD_SIZE_5; break; + case CS6: arg = DIGI_WORD_SIZE_6; break; + case CS7: arg = DIGI_WORD_SIZE_7; break; + case CS8: arg = DIGI_WORD_SIZE_8; break; + default: + dev_dbg(dev, + "digi_set_termios: can't handle word size %d\n", + cflag & CSIZE); + break; + } + + if (arg != -1) { + buf[i++] = DIGI_CMD_SET_WORD_SIZE; + buf[i++] = priv->dp_port_num; + buf[i++] = arg; + buf[i++] = 0; + } + + } + + /* set stop bits */ + if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { + + if ((cflag & CSTOPB)) + arg = DIGI_STOP_BITS_2; + else + arg = DIGI_STOP_BITS_1; + + buf[i++] = DIGI_CMD_SET_STOP_BITS; + buf[i++] = priv->dp_port_num; + buf[i++] = arg; + buf[i++] = 0; + + } + + /* set input flow control */ + if ((iflag & IXOFF) != (old_iflag & IXOFF) || + (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { + arg = 0; + if (iflag & IXOFF) + arg |= DIGI_INPUT_FLOW_CONTROL_XON_XOFF; + else + arg &= ~DIGI_INPUT_FLOW_CONTROL_XON_XOFF; + + if (cflag & CRTSCTS) { + arg |= DIGI_INPUT_FLOW_CONTROL_RTS; + + /* On USB-4 it is necessary to assert RTS prior */ + /* to selecting RTS input flow control. */ + buf[i++] = DIGI_CMD_SET_RTS_SIGNAL; + buf[i++] = priv->dp_port_num; + buf[i++] = DIGI_RTS_ACTIVE; + buf[i++] = 0; + + } else { + arg &= ~DIGI_INPUT_FLOW_CONTROL_RTS; + } + buf[i++] = DIGI_CMD_SET_INPUT_FLOW_CONTROL; + buf[i++] = priv->dp_port_num; + buf[i++] = arg; + buf[i++] = 0; + } + + /* set output flow control */ + if ((iflag & IXON) != (old_iflag & IXON) || + (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { + arg = 0; + if (iflag & IXON) + arg |= DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF; + else + arg &= ~DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF; + + if (cflag & CRTSCTS) + arg |= DIGI_OUTPUT_FLOW_CONTROL_CTS; + else + arg &= ~DIGI_OUTPUT_FLOW_CONTROL_CTS; + + buf[i++] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL; + buf[i++] = priv->dp_port_num; + buf[i++] = arg; + buf[i++] = 0; + } + + /* set receive enable/disable */ + if ((cflag & CREAD) != (old_cflag & CREAD)) { + if (cflag & CREAD) + arg = DIGI_ENABLE; + else + arg = DIGI_DISABLE; + + buf[i++] = DIGI_CMD_RECEIVE_ENABLE; + buf[i++] = priv->dp_port_num; + buf[i++] = arg; + buf[i++] = 0; + } + ret = digi_write_oob_command(port, buf, i, 1); + if (ret != 0) + dev_dbg(dev, "digi_set_termios: write oob failed, ret=%d\n", ret); + tty_encode_baud_rate(tty, baud, baud); +} + + +static void digi_break_ctl(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned char buf[4]; + + buf[0] = DIGI_CMD_BREAK_CONTROL; + buf[1] = 2; /* length */ + buf[2] = break_state ? 1 : 0; + buf[3] = 0; /* pad */ + digi_write_inb_command(port, buf, 4, 0); +} + + +static int digi_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct digi_port *priv = usb_get_serial_port_data(port); + unsigned int val; + unsigned long flags; + + spin_lock_irqsave(&priv->dp_port_lock, flags); + val = priv->dp_modem_signals; + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + return val; +} + + +static int digi_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct digi_port *priv = usb_get_serial_port_data(port); + unsigned int val; + unsigned long flags; + + spin_lock_irqsave(&priv->dp_port_lock, flags); + val = (priv->dp_modem_signals & ~clear) | set; + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + return digi_set_modem_signals(port, val, 1); +} + + +static int digi_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + + int ret, data_len, new_len; + struct digi_port *priv = usb_get_serial_port_data(port); + unsigned char *data = port->write_urb->transfer_buffer; + unsigned long flags; + + dev_dbg(&port->dev, "digi_write: TOP: port=%d, count=%d\n", + priv->dp_port_num, count); + + /* copy user data (which can sleep) before getting spin lock */ + count = min(count, port->bulk_out_size-2); + count = min(64, count); + + /* be sure only one write proceeds at a time */ + /* there are races on the port private buffer */ + spin_lock_irqsave(&priv->dp_port_lock, flags); + + /* wait for urb status clear to submit another urb */ + if (priv->dp_write_urb_in_use) { + /* buffer data if count is 1 (probably put_char) if possible */ + if (count == 1 && priv->dp_out_buf_len < DIGI_OUT_BUF_SIZE) { + priv->dp_out_buf[priv->dp_out_buf_len++] = *buf; + new_len = 1; + } else { + new_len = 0; + } + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + return new_len; + } + + /* allow space for any buffered data and for new data, up to */ + /* transfer buffer size - 2 (for command and length bytes) */ + new_len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len); + data_len = new_len + priv->dp_out_buf_len; + + if (data_len == 0) { + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + return 0; + } + + port->write_urb->transfer_buffer_length = data_len+2; + + *data++ = DIGI_CMD_SEND_DATA; + *data++ = data_len; + + /* copy in buffered data first */ + memcpy(data, priv->dp_out_buf, priv->dp_out_buf_len); + data += priv->dp_out_buf_len; + + /* copy in new data */ + memcpy(data, buf, new_len); + + ret = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (ret == 0) { + priv->dp_write_urb_in_use = 1; + ret = new_len; + priv->dp_out_buf_len = 0; + } + + /* return length of new data written, or error */ + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + if (ret < 0) + dev_err_console(port, + "%s: usb_submit_urb failed, ret=%d, port=%d\n", + __func__, ret, priv->dp_port_num); + dev_dbg(&port->dev, "digi_write: returning %d\n", ret); + return ret; + +} + +static void digi_write_bulk_callback(struct urb *urb) +{ + + struct usb_serial_port *port = urb->context; + struct usb_serial *serial; + struct digi_port *priv; + struct digi_serial *serial_priv; + unsigned long flags; + int ret = 0; + int status = urb->status; + bool wakeup; + + /* port and serial sanity check */ + if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) { + pr_err("%s: port or port->private is NULL, status=%d\n", + __func__, status); + return; + } + serial = port->serial; + if (serial == NULL || (serial_priv = usb_get_serial_data(serial)) == NULL) { + dev_err(&port->dev, + "%s: serial or serial->private is NULL, status=%d\n", + __func__, status); + return; + } + + /* handle oob callback */ + if (priv->dp_port_num == serial_priv->ds_oob_port_num) { + dev_dbg(&port->dev, "digi_write_bulk_callback: oob callback\n"); + spin_lock_irqsave(&priv->dp_port_lock, flags); + priv->dp_write_urb_in_use = 0; + wake_up_interruptible(&priv->write_wait); + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + return; + } + + /* try to send any buffered data on this port */ + wakeup = true; + spin_lock_irqsave(&priv->dp_port_lock, flags); + priv->dp_write_urb_in_use = 0; + if (priv->dp_out_buf_len > 0) { + *((unsigned char *)(port->write_urb->transfer_buffer)) + = (unsigned char)DIGI_CMD_SEND_DATA; + *((unsigned char *)(port->write_urb->transfer_buffer) + 1) + = (unsigned char)priv->dp_out_buf_len; + port->write_urb->transfer_buffer_length = + priv->dp_out_buf_len + 2; + memcpy(port->write_urb->transfer_buffer + 2, priv->dp_out_buf, + priv->dp_out_buf_len); + ret = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (ret == 0) { + priv->dp_write_urb_in_use = 1; + priv->dp_out_buf_len = 0; + wakeup = false; + } + } + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + + if (ret && ret != -EPERM) + dev_err_console(port, + "%s: usb_submit_urb failed, ret=%d, port=%d\n", + __func__, ret, priv->dp_port_num); + + if (wakeup) + tty_port_tty_wakeup(&port->port); +} + +static unsigned int digi_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct digi_port *priv = usb_get_serial_port_data(port); + unsigned long flags; + unsigned int room; + + spin_lock_irqsave(&priv->dp_port_lock, flags); + + if (priv->dp_write_urb_in_use) + room = 0; + else + room = port->bulk_out_size - 2 - priv->dp_out_buf_len; + + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + dev_dbg(&port->dev, "digi_write_room: port=%d, room=%u\n", priv->dp_port_num, room); + return room; + +} + +static unsigned int digi_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct digi_port *priv = usb_get_serial_port_data(port); + unsigned long flags; + unsigned int chars; + + spin_lock_irqsave(&priv->dp_port_lock, flags); + if (priv->dp_write_urb_in_use) + chars = port->bulk_out_size - 2; + else + chars = priv->dp_out_buf_len; + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + + dev_dbg(&port->dev, "%s: port=%d, chars=%d\n", __func__, + priv->dp_port_num, chars); + return chars; +} + +static void digi_dtr_rts(struct usb_serial_port *port, int on) +{ + /* Adjust DTR and RTS */ + digi_set_modem_signals(port, on * (TIOCM_DTR | TIOCM_RTS), 1); +} + +static int digi_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + int ret; + unsigned char buf[32]; + struct digi_port *priv = usb_get_serial_port_data(port); + struct ktermios not_termios; + + /* be sure the device is started up */ + if (digi_startup_device(port->serial) != 0) + return -ENXIO; + + /* read modem signals automatically whenever they change */ + buf[0] = DIGI_CMD_READ_INPUT_SIGNALS; + buf[1] = priv->dp_port_num; + buf[2] = DIGI_ENABLE; + buf[3] = 0; + + /* flush fifos */ + buf[4] = DIGI_CMD_IFLUSH_FIFO; + buf[5] = priv->dp_port_num; + buf[6] = DIGI_FLUSH_TX | DIGI_FLUSH_RX; + buf[7] = 0; + + ret = digi_write_oob_command(port, buf, 8, 1); + if (ret != 0) + dev_dbg(&port->dev, "digi_open: write oob failed, ret=%d\n", ret); + + /* set termios settings */ + if (tty) { + not_termios.c_cflag = ~tty->termios.c_cflag; + not_termios.c_iflag = ~tty->termios.c_iflag; + digi_set_termios(tty, port, ¬_termios); + } + return 0; +} + + +static void digi_close(struct usb_serial_port *port) +{ + DEFINE_WAIT(wait); + int ret; + unsigned char buf[32]; + struct digi_port *priv = usb_get_serial_port_data(port); + + mutex_lock(&port->serial->disc_mutex); + /* if disconnected, just clear flags */ + if (port->serial->disconnected) + goto exit; + + /* FIXME: Transmit idle belongs in the wait_unti_sent path */ + digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT); + + /* disable input flow control */ + buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL; + buf[1] = priv->dp_port_num; + buf[2] = DIGI_DISABLE; + buf[3] = 0; + + /* disable output flow control */ + buf[4] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL; + buf[5] = priv->dp_port_num; + buf[6] = DIGI_DISABLE; + buf[7] = 0; + + /* disable reading modem signals automatically */ + buf[8] = DIGI_CMD_READ_INPUT_SIGNALS; + buf[9] = priv->dp_port_num; + buf[10] = DIGI_DISABLE; + buf[11] = 0; + + /* disable receive */ + buf[12] = DIGI_CMD_RECEIVE_ENABLE; + buf[13] = priv->dp_port_num; + buf[14] = DIGI_DISABLE; + buf[15] = 0; + + /* flush fifos */ + buf[16] = DIGI_CMD_IFLUSH_FIFO; + buf[17] = priv->dp_port_num; + buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX; + buf[19] = 0; + + ret = digi_write_oob_command(port, buf, 20, 0); + if (ret != 0) + dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n", + ret); + /* wait for final commands on oob port to complete */ + prepare_to_wait(&priv->dp_flush_wait, &wait, + TASK_INTERRUPTIBLE); + schedule_timeout(DIGI_CLOSE_TIMEOUT); + finish_wait(&priv->dp_flush_wait, &wait); + + /* shutdown any outstanding bulk writes */ + usb_kill_urb(port->write_urb); +exit: + spin_lock_irq(&priv->dp_port_lock); + priv->dp_write_urb_in_use = 0; + wake_up_interruptible(&priv->dp_close_wait); + spin_unlock_irq(&priv->dp_port_lock); + mutex_unlock(&port->serial->disc_mutex); +} + + +/* + * Digi Startup Device + * + * Starts reads on all ports. Must be called AFTER startup, with + * urbs initialized. Returns 0 if successful, non-zero error otherwise. + */ + +static int digi_startup_device(struct usb_serial *serial) +{ + int i, ret = 0; + struct digi_serial *serial_priv = usb_get_serial_data(serial); + struct usb_serial_port *port; + + /* be sure this happens exactly once */ + spin_lock(&serial_priv->ds_serial_lock); + if (serial_priv->ds_device_started) { + spin_unlock(&serial_priv->ds_serial_lock); + return 0; + } + serial_priv->ds_device_started = 1; + spin_unlock(&serial_priv->ds_serial_lock); + + /* start reading from each bulk in endpoint for the device */ + /* set USB_DISABLE_SPD flag for write bulk urbs */ + for (i = 0; i < serial->type->num_ports + 1; i++) { + port = serial->port[i]; + ret = usb_submit_urb(port->read_urb, GFP_KERNEL); + if (ret != 0) { + dev_err(&port->dev, + "%s: usb_submit_urb failed, ret=%d, port=%d\n", + __func__, ret, i); + break; + } + } + return ret; +} + +static int digi_port_init(struct usb_serial_port *port, unsigned port_num) +{ + struct digi_port *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->dp_port_lock); + priv->dp_port_num = port_num; + init_waitqueue_head(&priv->dp_transmit_idle_wait); + init_waitqueue_head(&priv->dp_flush_wait); + init_waitqueue_head(&priv->dp_close_wait); + init_waitqueue_head(&priv->write_wait); + priv->dp_port = port; + + usb_set_serial_port_data(port, priv); + + return 0; +} + +static int digi_startup(struct usb_serial *serial) +{ + struct digi_serial *serial_priv; + int ret; + + serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL); + if (!serial_priv) + return -ENOMEM; + + spin_lock_init(&serial_priv->ds_serial_lock); + serial_priv->ds_oob_port_num = serial->type->num_ports; + serial_priv->ds_oob_port = serial->port[serial_priv->ds_oob_port_num]; + + ret = digi_port_init(serial_priv->ds_oob_port, + serial_priv->ds_oob_port_num); + if (ret) { + kfree(serial_priv); + return ret; + } + + usb_set_serial_data(serial, serial_priv); + + return 0; +} + + +static void digi_disconnect(struct usb_serial *serial) +{ + int i; + + /* stop reads and writes on all ports */ + for (i = 0; i < serial->type->num_ports + 1; i++) { + usb_kill_urb(serial->port[i]->read_urb); + usb_kill_urb(serial->port[i]->write_urb); + } +} + + +static void digi_release(struct usb_serial *serial) +{ + struct digi_serial *serial_priv; + struct digi_port *priv; + + serial_priv = usb_get_serial_data(serial); + + priv = usb_get_serial_port_data(serial_priv->ds_oob_port); + kfree(priv); + + kfree(serial_priv); +} + +static int digi_port_probe(struct usb_serial_port *port) +{ + return digi_port_init(port, port->port_number); +} + +static void digi_port_remove(struct usb_serial_port *port) +{ + struct digi_port *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); +} + +static void digi_read_bulk_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct digi_port *priv; + struct digi_serial *serial_priv; + int ret; + int status = urb->status; + + /* port sanity check, do not resubmit if port is not valid */ + if (port == NULL) + return; + priv = usb_get_serial_port_data(port); + if (priv == NULL) { + dev_err(&port->dev, "%s: port->private is NULL, status=%d\n", + __func__, status); + return; + } + if (port->serial == NULL || + (serial_priv = usb_get_serial_data(port->serial)) == NULL) { + dev_err(&port->dev, "%s: serial is bad or serial->private " + "is NULL, status=%d\n", __func__, status); + return; + } + + /* do not resubmit urb if it has any status error */ + if (status) { + dev_err(&port->dev, + "%s: nonzero read bulk status: status=%d, port=%d\n", + __func__, status, priv->dp_port_num); + return; + } + + /* handle oob or inb callback, do not resubmit if error */ + if (priv->dp_port_num == serial_priv->ds_oob_port_num) { + if (digi_read_oob_callback(urb) != 0) + return; + } else { + if (digi_read_inb_callback(urb) != 0) + return; + } + + /* continue read */ + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret != 0 && ret != -EPERM) { + dev_err(&port->dev, + "%s: failed resubmitting urb, ret=%d, port=%d\n", + __func__, ret, priv->dp_port_num); + } + +} + +/* + * Digi Read INB Callback + * + * Digi Read INB Callback handles reads on the in band ports, sending + * the data on to the tty subsystem. When called we know port and + * port->private are not NULL and port->serial has been validated. + * It returns 0 if successful, 1 if successful but the port is + * throttled, and -1 if the sanity checks failed. + */ + +static int digi_read_inb_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct digi_port *priv = usb_get_serial_port_data(port); + unsigned char *buf = urb->transfer_buffer; + unsigned long flags; + int opcode; + int len; + int port_status; + unsigned char *data; + int tty_flag, throttled; + + /* short/multiple packet check */ + if (urb->actual_length < 2) { + dev_warn(&port->dev, "short packet received\n"); + return -1; + } + + opcode = buf[0]; + len = buf[1]; + + if (urb->actual_length != len + 2) { + dev_err(&port->dev, "malformed packet received: port=%d, opcode=%d, len=%d, actual_length=%u\n", + priv->dp_port_num, opcode, len, urb->actual_length); + return -1; + } + + if (opcode == DIGI_CMD_RECEIVE_DATA && len < 1) { + dev_err(&port->dev, "malformed data packet received\n"); + return -1; + } + + spin_lock_irqsave(&priv->dp_port_lock, flags); + + /* check for throttle; if set, do not resubmit read urb */ + /* indicate the read chain needs to be restarted on unthrottle */ + throttled = priv->dp_throttled; + if (throttled) + priv->dp_throttle_restart = 1; + + /* receive data */ + if (opcode == DIGI_CMD_RECEIVE_DATA) { + port_status = buf[2]; + data = &buf[3]; + + /* get flag from port_status */ + tty_flag = 0; + + /* overrun is special, not associated with a char */ + if (port_status & DIGI_OVERRUN_ERROR) + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); + + /* break takes precedence over parity, */ + /* which takes precedence over framing errors */ + if (port_status & DIGI_BREAK_ERROR) + tty_flag = TTY_BREAK; + else if (port_status & DIGI_PARITY_ERROR) + tty_flag = TTY_PARITY; + else if (port_status & DIGI_FRAMING_ERROR) + tty_flag = TTY_FRAME; + + /* data length is len-1 (one byte of len is port_status) */ + --len; + if (len > 0) { + tty_insert_flip_string_fixed_flag(&port->port, data, + tty_flag, len); + tty_flip_buffer_push(&port->port); + } + } + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + + if (opcode == DIGI_CMD_RECEIVE_DISABLE) + dev_dbg(&port->dev, "%s: got RECEIVE_DISABLE\n", __func__); + else if (opcode != DIGI_CMD_RECEIVE_DATA) + dev_dbg(&port->dev, "%s: unknown opcode: %d\n", __func__, opcode); + + return throttled ? 1 : 0; + +} + + +/* + * Digi Read OOB Callback + * + * Digi Read OOB Callback handles reads on the out of band port. + * When called we know port and port->private are not NULL and + * the port->serial is valid. It returns 0 if successful, and + * -1 if the sanity checks failed. + */ + +static int digi_read_oob_callback(struct urb *urb) +{ + + struct usb_serial_port *port = urb->context; + struct usb_serial *serial = port->serial; + struct tty_struct *tty; + struct digi_port *priv; + unsigned char *buf = urb->transfer_buffer; + int opcode, line, status, val; + unsigned long flags; + int i; + unsigned int rts; + + if (urb->actual_length < 4) + return -1; + + /* handle each oob command */ + for (i = 0; i < urb->actual_length - 3; i += 4) { + opcode = buf[i]; + line = buf[i + 1]; + status = buf[i + 2]; + val = buf[i + 3]; + + dev_dbg(&port->dev, "digi_read_oob_callback: opcode=%d, line=%d, status=%d, val=%d\n", + opcode, line, status, val); + + if (status != 0 || line >= serial->type->num_ports) + continue; + + port = serial->port[line]; + + priv = usb_get_serial_port_data(port); + if (priv == NULL) + return -1; + + tty = tty_port_tty_get(&port->port); + + rts = 0; + if (tty) + rts = C_CRTSCTS(tty); + + if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) { + bool wakeup = false; + + spin_lock_irqsave(&priv->dp_port_lock, flags); + /* convert from digi flags to termiox flags */ + if (val & DIGI_READ_INPUT_SIGNALS_CTS) { + priv->dp_modem_signals |= TIOCM_CTS; + if (rts) + wakeup = true; + } else { + priv->dp_modem_signals &= ~TIOCM_CTS; + /* port must be open to use tty struct */ + } + if (val & DIGI_READ_INPUT_SIGNALS_DSR) + priv->dp_modem_signals |= TIOCM_DSR; + else + priv->dp_modem_signals &= ~TIOCM_DSR; + if (val & DIGI_READ_INPUT_SIGNALS_RI) + priv->dp_modem_signals |= TIOCM_RI; + else + priv->dp_modem_signals &= ~TIOCM_RI; + if (val & DIGI_READ_INPUT_SIGNALS_DCD) + priv->dp_modem_signals |= TIOCM_CD; + else + priv->dp_modem_signals &= ~TIOCM_CD; + + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + + if (wakeup) + tty_port_tty_wakeup(&port->port); + } else if (opcode == DIGI_CMD_TRANSMIT_IDLE) { + spin_lock_irqsave(&priv->dp_port_lock, flags); + priv->dp_transmit_idle = 1; + wake_up_interruptible(&priv->dp_transmit_idle_wait); + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + } else if (opcode == DIGI_CMD_IFLUSH_FIFO) { + wake_up_interruptible(&priv->dp_flush_wait); + } + tty_kref_put(tty); + } + return 0; + +} + +module_usb_serial_driver(serial_drivers, id_table_combined); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); -- cgit v1.2.3