From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- drivers/usb/serial/upd78f0730.c | 432 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 432 insertions(+) create mode 100644 drivers/usb/serial/upd78f0730.c (limited to 'drivers/usb/serial/upd78f0730.c') diff --git a/drivers/usb/serial/upd78f0730.c b/drivers/usb/serial/upd78f0730.c new file mode 100644 index 000000000..c47439bd9 --- /dev/null +++ b/drivers/usb/serial/upd78f0730.c @@ -0,0 +1,432 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Renesas Electronics uPD78F0730 USB to serial converter driver + * + * Copyright (C) 2014,2016 Maksim Salau + * + * Protocol of the adaptor is described in the application note U19660EJ1V0AN00 + * μPD78F0730 8-bit Single-Chip Microcontroller + * USB-to-Serial Conversion Software + * + * + * The adaptor functionality is limited to the following: + * - data bits: 7 or 8 + * - stop bits: 1 or 2 + * - parity: even, odd or none + * - flow control: none + * - baud rates: 0, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 153600 + * - signals: DTR, RTS and BREAK + */ + +#include +#include +#include +#include +#include + +#define DRIVER_DESC "Renesas uPD78F0730 USB to serial converter driver" + +#define DRIVER_AUTHOR "Maksim Salau " + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x0409, 0x0063) }, /* V850ESJX3-STICK */ + { USB_DEVICE(0x045B, 0x0212) }, /* YRPBRL78G13, YRPBRL78G14 */ + { USB_DEVICE(0x064B, 0x7825) }, /* Analog Devices EVAL-ADXL362Z-DB */ + {} +}; + +MODULE_DEVICE_TABLE(usb, id_table); + +/* + * Each adaptor is associated with a private structure, that holds the current + * state of control signals (DTR, RTS and BREAK). + */ +struct upd78f0730_port_private { + struct mutex lock; /* mutex to protect line_signals */ + u8 line_signals; +}; + +/* Op-codes of control commands */ +#define UPD78F0730_CMD_LINE_CONTROL 0x00 +#define UPD78F0730_CMD_SET_DTR_RTS 0x01 +#define UPD78F0730_CMD_SET_XON_XOFF_CHR 0x02 +#define UPD78F0730_CMD_OPEN_CLOSE 0x03 +#define UPD78F0730_CMD_SET_ERR_CHR 0x04 + +/* Data sizes in UPD78F0730_CMD_LINE_CONTROL command */ +#define UPD78F0730_DATA_SIZE_7_BITS 0x00 +#define UPD78F0730_DATA_SIZE_8_BITS 0x01 +#define UPD78F0730_DATA_SIZE_MASK 0x01 + +/* Stop-bit modes in UPD78F0730_CMD_LINE_CONTROL command */ +#define UPD78F0730_STOP_BIT_1_BIT 0x00 +#define UPD78F0730_STOP_BIT_2_BIT 0x02 +#define UPD78F0730_STOP_BIT_MASK 0x02 + +/* Parity modes in UPD78F0730_CMD_LINE_CONTROL command */ +#define UPD78F0730_PARITY_NONE 0x00 +#define UPD78F0730_PARITY_EVEN 0x04 +#define UPD78F0730_PARITY_ODD 0x08 +#define UPD78F0730_PARITY_MASK 0x0C + +/* Flow control modes in UPD78F0730_CMD_LINE_CONTROL command */ +#define UPD78F0730_FLOW_CONTROL_NONE 0x00 +#define UPD78F0730_FLOW_CONTROL_HW 0x10 +#define UPD78F0730_FLOW_CONTROL_SW 0x20 +#define UPD78F0730_FLOW_CONTROL_MASK 0x30 + +/* Control signal bits in UPD78F0730_CMD_SET_DTR_RTS command */ +#define UPD78F0730_RTS 0x01 +#define UPD78F0730_DTR 0x02 +#define UPD78F0730_BREAK 0x04 + +/* Port modes in UPD78F0730_CMD_OPEN_CLOSE command */ +#define UPD78F0730_PORT_CLOSE 0x00 +#define UPD78F0730_PORT_OPEN 0x01 + +/* Error character substitution modes in UPD78F0730_CMD_SET_ERR_CHR command */ +#define UPD78F0730_ERR_CHR_DISABLED 0x00 +#define UPD78F0730_ERR_CHR_ENABLED 0x01 + +/* + * Declaration of command structures + */ + +/* UPD78F0730_CMD_LINE_CONTROL command */ +struct upd78f0730_line_control { + u8 opcode; + __le32 baud_rate; + u8 params; +} __packed; + +/* UPD78F0730_CMD_SET_DTR_RTS command */ +struct upd78f0730_set_dtr_rts { + u8 opcode; + u8 params; +}; + +/* UPD78F0730_CMD_SET_XON_OFF_CHR command */ +struct upd78f0730_set_xon_xoff_chr { + u8 opcode; + u8 xon; + u8 xoff; +}; + +/* UPD78F0730_CMD_OPEN_CLOSE command */ +struct upd78f0730_open_close { + u8 opcode; + u8 state; +}; + +/* UPD78F0730_CMD_SET_ERR_CHR command */ +struct upd78f0730_set_err_chr { + u8 opcode; + u8 state; + u8 err_char; +}; + +static int upd78f0730_send_ctl(struct usb_serial_port *port, + const void *data, int size) +{ + struct usb_device *usbdev = port->serial->dev; + void *buf; + int res; + + if (size <= 0 || !data) + return -EINVAL; + + buf = kmemdup(data, size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + res = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x00, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + 0x0000, 0x0000, buf, size, USB_CTRL_SET_TIMEOUT); + + kfree(buf); + + if (res < 0) { + struct device *dev = &port->dev; + + dev_err(dev, "failed to send control request %02x: %d\n", + *(u8 *)data, res); + + return res; + } + + return 0; +} + +static int upd78f0730_port_probe(struct usb_serial_port *port) +{ + struct upd78f0730_port_private *private; + + private = kzalloc(sizeof(*private), GFP_KERNEL); + if (!private) + return -ENOMEM; + + mutex_init(&private->lock); + usb_set_serial_port_data(port, private); + + return 0; +} + +static void upd78f0730_port_remove(struct usb_serial_port *port) +{ + struct upd78f0730_port_private *private; + + private = usb_get_serial_port_data(port); + mutex_destroy(&private->lock); + kfree(private); +} + +static int upd78f0730_tiocmget(struct tty_struct *tty) +{ + struct upd78f0730_port_private *private; + struct usb_serial_port *port = tty->driver_data; + int signals; + int res; + + private = usb_get_serial_port_data(port); + + mutex_lock(&private->lock); + signals = private->line_signals; + mutex_unlock(&private->lock); + + res = ((signals & UPD78F0730_DTR) ? TIOCM_DTR : 0) | + ((signals & UPD78F0730_RTS) ? TIOCM_RTS : 0); + + dev_dbg(&port->dev, "%s - res = %x\n", __func__, res); + + return res; +} + +static int upd78f0730_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct upd78f0730_port_private *private; + struct upd78f0730_set_dtr_rts request; + struct device *dev = &port->dev; + int res; + + private = usb_get_serial_port_data(port); + + mutex_lock(&private->lock); + if (set & TIOCM_DTR) { + private->line_signals |= UPD78F0730_DTR; + dev_dbg(dev, "%s - set DTR\n", __func__); + } + if (set & TIOCM_RTS) { + private->line_signals |= UPD78F0730_RTS; + dev_dbg(dev, "%s - set RTS\n", __func__); + } + if (clear & TIOCM_DTR) { + private->line_signals &= ~UPD78F0730_DTR; + dev_dbg(dev, "%s - clear DTR\n", __func__); + } + if (clear & TIOCM_RTS) { + private->line_signals &= ~UPD78F0730_RTS; + dev_dbg(dev, "%s - clear RTS\n", __func__); + } + request.opcode = UPD78F0730_CMD_SET_DTR_RTS; + request.params = private->line_signals; + + res = upd78f0730_send_ctl(port, &request, sizeof(request)); + mutex_unlock(&private->lock); + + return res; +} + +static void upd78f0730_break_ctl(struct tty_struct *tty, int break_state) +{ + struct upd78f0730_port_private *private; + struct usb_serial_port *port = tty->driver_data; + struct upd78f0730_set_dtr_rts request; + struct device *dev = &port->dev; + + private = usb_get_serial_port_data(port); + + mutex_lock(&private->lock); + if (break_state) { + private->line_signals |= UPD78F0730_BREAK; + dev_dbg(dev, "%s - set BREAK\n", __func__); + } else { + private->line_signals &= ~UPD78F0730_BREAK; + dev_dbg(dev, "%s - clear BREAK\n", __func__); + } + request.opcode = UPD78F0730_CMD_SET_DTR_RTS; + request.params = private->line_signals; + + upd78f0730_send_ctl(port, &request, sizeof(request)); + mutex_unlock(&private->lock); +} + +static void upd78f0730_dtr_rts(struct usb_serial_port *port, int on) +{ + struct tty_struct *tty = port->port.tty; + unsigned int set = 0; + unsigned int clear = 0; + + if (on) + set = TIOCM_DTR | TIOCM_RTS; + else + clear = TIOCM_DTR | TIOCM_RTS; + + upd78f0730_tiocmset(tty, set, clear); +} + +static speed_t upd78f0730_get_baud_rate(struct tty_struct *tty) +{ + const speed_t baud_rate = tty_get_baud_rate(tty); + static const speed_t supported[] = { + 0, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 153600 + }; + int i; + + for (i = ARRAY_SIZE(supported) - 1; i >= 0; i--) { + if (baud_rate == supported[i]) + return baud_rate; + } + + /* If the baud rate is not supported, switch to the default one */ + tty_encode_baud_rate(tty, 9600, 9600); + + return tty_get_baud_rate(tty); +} + +static void upd78f0730_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + const struct ktermios *old_termios) +{ + struct device *dev = &port->dev; + struct upd78f0730_line_control request; + speed_t baud_rate; + + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) + return; + + if (C_BAUD(tty) == B0) + upd78f0730_dtr_rts(port, 0); + else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) + upd78f0730_dtr_rts(port, 1); + + baud_rate = upd78f0730_get_baud_rate(tty); + request.opcode = UPD78F0730_CMD_LINE_CONTROL; + request.baud_rate = cpu_to_le32(baud_rate); + request.params = 0; + dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud_rate); + + switch (C_CSIZE(tty)) { + case CS7: + request.params |= UPD78F0730_DATA_SIZE_7_BITS; + dev_dbg(dev, "%s - 7 data bits\n", __func__); + break; + default: + tty->termios.c_cflag &= ~CSIZE; + tty->termios.c_cflag |= CS8; + dev_warn(dev, "data size is not supported, using 8 bits\n"); + fallthrough; + case CS8: + request.params |= UPD78F0730_DATA_SIZE_8_BITS; + dev_dbg(dev, "%s - 8 data bits\n", __func__); + break; + } + + if (C_PARENB(tty)) { + if (C_PARODD(tty)) { + request.params |= UPD78F0730_PARITY_ODD; + dev_dbg(dev, "%s - odd parity\n", __func__); + } else { + request.params |= UPD78F0730_PARITY_EVEN; + dev_dbg(dev, "%s - even parity\n", __func__); + } + + if (C_CMSPAR(tty)) { + tty->termios.c_cflag &= ~CMSPAR; + dev_warn(dev, "MARK/SPACE parity is not supported\n"); + } + } else { + request.params |= UPD78F0730_PARITY_NONE; + dev_dbg(dev, "%s - no parity\n", __func__); + } + + if (C_CSTOPB(tty)) { + request.params |= UPD78F0730_STOP_BIT_2_BIT; + dev_dbg(dev, "%s - 2 stop bits\n", __func__); + } else { + request.params |= UPD78F0730_STOP_BIT_1_BIT; + dev_dbg(dev, "%s - 1 stop bit\n", __func__); + } + + if (C_CRTSCTS(tty)) { + tty->termios.c_cflag &= ~CRTSCTS; + dev_warn(dev, "RTSCTS flow control is not supported\n"); + } + if (I_IXOFF(tty) || I_IXON(tty)) { + tty->termios.c_iflag &= ~(IXOFF | IXON); + dev_warn(dev, "XON/XOFF flow control is not supported\n"); + } + request.params |= UPD78F0730_FLOW_CONTROL_NONE; + dev_dbg(dev, "%s - no flow control\n", __func__); + + upd78f0730_send_ctl(port, &request, sizeof(request)); +} + +static int upd78f0730_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + static const struct upd78f0730_open_close request = { + .opcode = UPD78F0730_CMD_OPEN_CLOSE, + .state = UPD78F0730_PORT_OPEN + }; + int res; + + res = upd78f0730_send_ctl(port, &request, sizeof(request)); + if (res) + return res; + + if (tty) + upd78f0730_set_termios(tty, port, NULL); + + return usb_serial_generic_open(tty, port); +} + +static void upd78f0730_close(struct usb_serial_port *port) +{ + static const struct upd78f0730_open_close request = { + .opcode = UPD78F0730_CMD_OPEN_CLOSE, + .state = UPD78F0730_PORT_CLOSE + }; + + usb_serial_generic_close(port); + upd78f0730_send_ctl(port, &request, sizeof(request)); +} + +static struct usb_serial_driver upd78f0730_device = { + .driver = { + .owner = THIS_MODULE, + .name = "upd78f0730", + }, + .id_table = id_table, + .num_ports = 1, + .port_probe = upd78f0730_port_probe, + .port_remove = upd78f0730_port_remove, + .open = upd78f0730_open, + .close = upd78f0730_close, + .set_termios = upd78f0730_set_termios, + .tiocmget = upd78f0730_tiocmget, + .tiocmset = upd78f0730_tiocmset, + .dtr_rts = upd78f0730_dtr_rts, + .break_ctl = upd78f0730_break_ctl, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &upd78f0730_device, + NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3