From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- fs/xfs/libxfs/xfs_log_format.h | 993 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 993 insertions(+) create mode 100644 fs/xfs/libxfs/xfs_log_format.h (limited to 'fs/xfs/libxfs/xfs_log_format.h') diff --git a/fs/xfs/libxfs/xfs_log_format.h b/fs/xfs/libxfs/xfs_log_format.h new file mode 100644 index 000000000..f13e0809d --- /dev/null +++ b/fs/xfs/libxfs/xfs_log_format.h @@ -0,0 +1,993 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2000-2003,2005 Silicon Graphics, Inc. + * All Rights Reserved. + */ +#ifndef __XFS_LOG_FORMAT_H__ +#define __XFS_LOG_FORMAT_H__ + +struct xfs_mount; +struct xfs_trans_res; + +/* + * On-disk Log Format definitions. + * + * This file contains all the on-disk format definitions used within the log. It + * includes the physical log structure itself, as well as all the log item + * format structures that are written into the log and intepreted by log + * recovery. We start with the physical log format definitions, and then work + * through all the log items definitions and everything they encode into the + * log. + */ +typedef uint32_t xlog_tid_t; + +#define XLOG_MIN_ICLOGS 2 +#define XLOG_MAX_ICLOGS 8 +#define XLOG_HEADER_MAGIC_NUM 0xFEEDbabe /* Invalid cycle number */ +#define XLOG_VERSION_1 1 +#define XLOG_VERSION_2 2 /* Large IClogs, Log sunit */ +#define XLOG_VERSION_OKBITS (XLOG_VERSION_1 | XLOG_VERSION_2) +#define XLOG_MIN_RECORD_BSIZE (16*1024) /* eventually 32k */ +#define XLOG_BIG_RECORD_BSIZE (32*1024) /* 32k buffers */ +#define XLOG_MAX_RECORD_BSIZE (256*1024) +#define XLOG_HEADER_CYCLE_SIZE (32*1024) /* cycle data in header */ +#define XLOG_MIN_RECORD_BSHIFT 14 /* 16384 == 1 << 14 */ +#define XLOG_BIG_RECORD_BSHIFT 15 /* 32k == 1 << 15 */ +#define XLOG_MAX_RECORD_BSHIFT 18 /* 256k == 1 << 18 */ + +#define XLOG_HEADER_SIZE 512 + +/* Minimum number of transactions that must fit in the log (defined by mkfs) */ +#define XFS_MIN_LOG_FACTOR 3 + +#define XLOG_REC_SHIFT(log) \ + BTOBB(1 << (xfs_has_logv2(log->l_mp) ? \ + XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT)) +#define XLOG_TOTAL_REC_SHIFT(log) \ + BTOBB(XLOG_MAX_ICLOGS << (xfs_has_logv2(log->l_mp) ? \ + XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT)) + +/* get lsn fields */ +#define CYCLE_LSN(lsn) ((uint)((lsn)>>32)) +#define BLOCK_LSN(lsn) ((uint)(lsn)) + +/* this is used in a spot where we might otherwise double-endian-flip */ +#define CYCLE_LSN_DISK(lsn) (((__be32 *)&(lsn))[0]) + +static inline xfs_lsn_t xlog_assign_lsn(uint cycle, uint block) +{ + return ((xfs_lsn_t)cycle << 32) | block; +} + +static inline uint xlog_get_cycle(char *ptr) +{ + if (be32_to_cpu(*(__be32 *)ptr) == XLOG_HEADER_MAGIC_NUM) + return be32_to_cpu(*((__be32 *)ptr + 1)); + else + return be32_to_cpu(*(__be32 *)ptr); +} + +/* Log Clients */ +#define XFS_TRANSACTION 0x69 +#define XFS_LOG 0xaa + +#define XLOG_UNMOUNT_TYPE 0x556e /* Un for Unmount */ + +/* + * Log item for unmount records. + * + * The unmount record used to have a string "Unmount filesystem--" in the + * data section where the "Un" was really a magic number (XLOG_UNMOUNT_TYPE). + * We just write the magic number now; see xfs_log_unmount_write. + */ +struct xfs_unmount_log_format { + uint16_t magic; /* XLOG_UNMOUNT_TYPE */ + uint16_t pad1; + uint32_t pad2; /* may as well make it 64 bits */ +}; + +/* Region types for iovec's i_type */ +#define XLOG_REG_TYPE_BFORMAT 1 +#define XLOG_REG_TYPE_BCHUNK 2 +#define XLOG_REG_TYPE_EFI_FORMAT 3 +#define XLOG_REG_TYPE_EFD_FORMAT 4 +#define XLOG_REG_TYPE_IFORMAT 5 +#define XLOG_REG_TYPE_ICORE 6 +#define XLOG_REG_TYPE_IEXT 7 +#define XLOG_REG_TYPE_IBROOT 8 +#define XLOG_REG_TYPE_ILOCAL 9 +#define XLOG_REG_TYPE_IATTR_EXT 10 +#define XLOG_REG_TYPE_IATTR_BROOT 11 +#define XLOG_REG_TYPE_IATTR_LOCAL 12 +#define XLOG_REG_TYPE_QFORMAT 13 +#define XLOG_REG_TYPE_DQUOT 14 +#define XLOG_REG_TYPE_QUOTAOFF 15 +#define XLOG_REG_TYPE_LRHEADER 16 +#define XLOG_REG_TYPE_UNMOUNT 17 +#define XLOG_REG_TYPE_COMMIT 18 +#define XLOG_REG_TYPE_TRANSHDR 19 +#define XLOG_REG_TYPE_ICREATE 20 +#define XLOG_REG_TYPE_RUI_FORMAT 21 +#define XLOG_REG_TYPE_RUD_FORMAT 22 +#define XLOG_REG_TYPE_CUI_FORMAT 23 +#define XLOG_REG_TYPE_CUD_FORMAT 24 +#define XLOG_REG_TYPE_BUI_FORMAT 25 +#define XLOG_REG_TYPE_BUD_FORMAT 26 +#define XLOG_REG_TYPE_ATTRI_FORMAT 27 +#define XLOG_REG_TYPE_ATTRD_FORMAT 28 +#define XLOG_REG_TYPE_ATTR_NAME 29 +#define XLOG_REG_TYPE_ATTR_VALUE 30 +#define XLOG_REG_TYPE_MAX 30 + + +/* + * Flags to log operation header + * + * The first write of a new transaction will be preceded with a start + * record, XLOG_START_TRANS. Once a transaction is committed, a commit + * record is written, XLOG_COMMIT_TRANS. If a single region can not fit into + * the remainder of the current active in-core log, it is split up into + * multiple regions. Each partial region will be marked with a + * XLOG_CONTINUE_TRANS until the last one, which gets marked with XLOG_END_TRANS. + * + */ +#define XLOG_START_TRANS 0x01 /* Start a new transaction */ +#define XLOG_COMMIT_TRANS 0x02 /* Commit this transaction */ +#define XLOG_CONTINUE_TRANS 0x04 /* Cont this trans into new region */ +#define XLOG_WAS_CONT_TRANS 0x08 /* Cont this trans into new region */ +#define XLOG_END_TRANS 0x10 /* End a continued transaction */ +#define XLOG_UNMOUNT_TRANS 0x20 /* Unmount a filesystem transaction */ + + +typedef struct xlog_op_header { + __be32 oh_tid; /* transaction id of operation : 4 b */ + __be32 oh_len; /* bytes in data region : 4 b */ + __u8 oh_clientid; /* who sent me this : 1 b */ + __u8 oh_flags; /* : 1 b */ + __u16 oh_res2; /* 32 bit align : 2 b */ +} xlog_op_header_t; + +/* valid values for h_fmt */ +#define XLOG_FMT_UNKNOWN 0 +#define XLOG_FMT_LINUX_LE 1 +#define XLOG_FMT_LINUX_BE 2 +#define XLOG_FMT_IRIX_BE 3 + +/* our fmt */ +#ifdef XFS_NATIVE_HOST +#define XLOG_FMT XLOG_FMT_LINUX_BE +#else +#define XLOG_FMT XLOG_FMT_LINUX_LE +#endif + +typedef struct xlog_rec_header { + __be32 h_magicno; /* log record (LR) identifier : 4 */ + __be32 h_cycle; /* write cycle of log : 4 */ + __be32 h_version; /* LR version : 4 */ + __be32 h_len; /* len in bytes; should be 64-bit aligned: 4 */ + __be64 h_lsn; /* lsn of this LR : 8 */ + __be64 h_tail_lsn; /* lsn of 1st LR w/ buffers not committed: 8 */ + __le32 h_crc; /* crc of log record : 4 */ + __be32 h_prev_block; /* block number to previous LR : 4 */ + __be32 h_num_logops; /* number of log operations in this LR : 4 */ + __be32 h_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE]; + /* new fields */ + __be32 h_fmt; /* format of log record : 4 */ + uuid_t h_fs_uuid; /* uuid of FS : 16 */ + __be32 h_size; /* iclog size : 4 */ +} xlog_rec_header_t; + +typedef struct xlog_rec_ext_header { + __be32 xh_cycle; /* write cycle of log : 4 */ + __be32 xh_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE]; /* : 256 */ +} xlog_rec_ext_header_t; + +/* + * Quite misnamed, because this union lays out the actual on-disk log buffer. + */ +typedef union xlog_in_core2 { + xlog_rec_header_t hic_header; + xlog_rec_ext_header_t hic_xheader; + char hic_sector[XLOG_HEADER_SIZE]; +} xlog_in_core_2_t; + +/* not an on-disk structure, but needed by log recovery in userspace */ +typedef struct xfs_log_iovec { + void *i_addr; /* beginning address of region */ + int i_len; /* length in bytes of region */ + uint i_type; /* type of region */ +} xfs_log_iovec_t; + + +/* + * Transaction Header definitions. + * + * This is the structure written in the log at the head of every transaction. It + * identifies the type and id of the transaction, and contains the number of + * items logged by the transaction so we know how many to expect during + * recovery. + * + * Do not change the below structure without redoing the code in + * xlog_recover_add_to_trans() and xlog_recover_add_to_cont_trans(). + */ +typedef struct xfs_trans_header { + uint th_magic; /* magic number */ + uint th_type; /* transaction type */ + int32_t th_tid; /* transaction id (unused) */ + uint th_num_items; /* num items logged by trans */ +} xfs_trans_header_t; + +#define XFS_TRANS_HEADER_MAGIC 0x5452414e /* TRAN */ + +/* + * The only type valid for th_type in CIL-enabled file system logs: + */ +#define XFS_TRANS_CHECKPOINT 40 + +/* + * Log item types. + */ +#define XFS_LI_EFI 0x1236 +#define XFS_LI_EFD 0x1237 +#define XFS_LI_IUNLINK 0x1238 +#define XFS_LI_INODE 0x123b /* aligned ino chunks, var-size ibufs */ +#define XFS_LI_BUF 0x123c /* v2 bufs, variable sized inode bufs */ +#define XFS_LI_DQUOT 0x123d +#define XFS_LI_QUOTAOFF 0x123e +#define XFS_LI_ICREATE 0x123f +#define XFS_LI_RUI 0x1240 /* rmap update intent */ +#define XFS_LI_RUD 0x1241 +#define XFS_LI_CUI 0x1242 /* refcount update intent */ +#define XFS_LI_CUD 0x1243 +#define XFS_LI_BUI 0x1244 /* bmbt update intent */ +#define XFS_LI_BUD 0x1245 +#define XFS_LI_ATTRI 0x1246 /* attr set/remove intent*/ +#define XFS_LI_ATTRD 0x1247 /* attr set/remove done */ + +#define XFS_LI_TYPE_DESC \ + { XFS_LI_EFI, "XFS_LI_EFI" }, \ + { XFS_LI_EFD, "XFS_LI_EFD" }, \ + { XFS_LI_IUNLINK, "XFS_LI_IUNLINK" }, \ + { XFS_LI_INODE, "XFS_LI_INODE" }, \ + { XFS_LI_BUF, "XFS_LI_BUF" }, \ + { XFS_LI_DQUOT, "XFS_LI_DQUOT" }, \ + { XFS_LI_QUOTAOFF, "XFS_LI_QUOTAOFF" }, \ + { XFS_LI_ICREATE, "XFS_LI_ICREATE" }, \ + { XFS_LI_RUI, "XFS_LI_RUI" }, \ + { XFS_LI_RUD, "XFS_LI_RUD" }, \ + { XFS_LI_CUI, "XFS_LI_CUI" }, \ + { XFS_LI_CUD, "XFS_LI_CUD" }, \ + { XFS_LI_BUI, "XFS_LI_BUI" }, \ + { XFS_LI_BUD, "XFS_LI_BUD" }, \ + { XFS_LI_ATTRI, "XFS_LI_ATTRI" }, \ + { XFS_LI_ATTRD, "XFS_LI_ATTRD" } + +/* + * Inode Log Item Format definitions. + * + * This is the structure used to lay out an inode log item in the + * log. The size of the inline data/extents/b-tree root to be logged + * (if any) is indicated in the ilf_dsize field. Changes to this structure + * must be added on to the end. + */ +struct xfs_inode_log_format { + uint16_t ilf_type; /* inode log item type */ + uint16_t ilf_size; /* size of this item */ + uint32_t ilf_fields; /* flags for fields logged */ + uint16_t ilf_asize; /* size of attr d/ext/root */ + uint16_t ilf_dsize; /* size of data/ext/root */ + uint32_t ilf_pad; /* pad for 64 bit boundary */ + uint64_t ilf_ino; /* inode number */ + union { + uint32_t ilfu_rdev; /* rdev value for dev inode*/ + uint8_t __pad[16]; /* unused */ + } ilf_u; + int64_t ilf_blkno; /* blkno of inode buffer */ + int32_t ilf_len; /* len of inode buffer */ + int32_t ilf_boffset; /* off of inode in buffer */ +}; + +/* + * Old 32 bit systems will log in this format without the 64 bit + * alignment padding. Recovery will detect this and convert it to the + * correct format. + */ +struct xfs_inode_log_format_32 { + uint16_t ilf_type; /* inode log item type */ + uint16_t ilf_size; /* size of this item */ + uint32_t ilf_fields; /* flags for fields logged */ + uint16_t ilf_asize; /* size of attr d/ext/root */ + uint16_t ilf_dsize; /* size of data/ext/root */ + uint64_t ilf_ino; /* inode number */ + union { + uint32_t ilfu_rdev; /* rdev value for dev inode*/ + uint8_t __pad[16]; /* unused */ + } ilf_u; + int64_t ilf_blkno; /* blkno of inode buffer */ + int32_t ilf_len; /* len of inode buffer */ + int32_t ilf_boffset; /* off of inode in buffer */ +} __attribute__((packed)); + + +/* + * Flags for xfs_trans_log_inode flags field. + */ +#define XFS_ILOG_CORE 0x001 /* log standard inode fields */ +#define XFS_ILOG_DDATA 0x002 /* log i_df.if_data */ +#define XFS_ILOG_DEXT 0x004 /* log i_df.if_extents */ +#define XFS_ILOG_DBROOT 0x008 /* log i_df.i_broot */ +#define XFS_ILOG_DEV 0x010 /* log the dev field */ +#define XFS_ILOG_UUID 0x020 /* added long ago, but never used */ +#define XFS_ILOG_ADATA 0x040 /* log i_af.if_data */ +#define XFS_ILOG_AEXT 0x080 /* log i_af.if_extents */ +#define XFS_ILOG_ABROOT 0x100 /* log i_af.i_broot */ +#define XFS_ILOG_DOWNER 0x200 /* change the data fork owner on replay */ +#define XFS_ILOG_AOWNER 0x400 /* change the attr fork owner on replay */ + + +/* + * The timestamps are dirty, but not necessarily anything else in the inode + * core. Unlike the other fields above this one must never make it to disk + * in the ilf_fields of the inode_log_format, but is purely store in-memory in + * ili_fields in the inode_log_item. + */ +#define XFS_ILOG_TIMESTAMP 0x4000 + +#define XFS_ILOG_NONCORE (XFS_ILOG_DDATA | XFS_ILOG_DEXT | \ + XFS_ILOG_DBROOT | XFS_ILOG_DEV | \ + XFS_ILOG_ADATA | XFS_ILOG_AEXT | \ + XFS_ILOG_ABROOT | XFS_ILOG_DOWNER | \ + XFS_ILOG_AOWNER) + +#define XFS_ILOG_DFORK (XFS_ILOG_DDATA | XFS_ILOG_DEXT | \ + XFS_ILOG_DBROOT) + +#define XFS_ILOG_AFORK (XFS_ILOG_ADATA | XFS_ILOG_AEXT | \ + XFS_ILOG_ABROOT) + +#define XFS_ILOG_ALL (XFS_ILOG_CORE | XFS_ILOG_DDATA | \ + XFS_ILOG_DEXT | XFS_ILOG_DBROOT | \ + XFS_ILOG_DEV | XFS_ILOG_ADATA | \ + XFS_ILOG_AEXT | XFS_ILOG_ABROOT | \ + XFS_ILOG_TIMESTAMP | XFS_ILOG_DOWNER | \ + XFS_ILOG_AOWNER) + +static inline int xfs_ilog_fbroot(int w) +{ + return (w == XFS_DATA_FORK ? XFS_ILOG_DBROOT : XFS_ILOG_ABROOT); +} + +static inline int xfs_ilog_fext(int w) +{ + return (w == XFS_DATA_FORK ? XFS_ILOG_DEXT : XFS_ILOG_AEXT); +} + +static inline int xfs_ilog_fdata(int w) +{ + return (w == XFS_DATA_FORK ? XFS_ILOG_DDATA : XFS_ILOG_ADATA); +} + +/* + * Incore version of the on-disk inode core structures. We log this directly + * into the journal in host CPU format (for better or worse) and as such + * directly mirrors the xfs_dinode structure as it must contain all the same + * information. + */ +typedef uint64_t xfs_log_timestamp_t; + +/* Legacy timestamp encoding format. */ +struct xfs_log_legacy_timestamp { + int32_t t_sec; /* timestamp seconds */ + int32_t t_nsec; /* timestamp nanoseconds */ +}; + +/* + * Define the format of the inode core that is logged. This structure must be + * kept identical to struct xfs_dinode except for the endianness annotations. + */ +struct xfs_log_dinode { + uint16_t di_magic; /* inode magic # = XFS_DINODE_MAGIC */ + uint16_t di_mode; /* mode and type of file */ + int8_t di_version; /* inode version */ + int8_t di_format; /* format of di_c data */ + uint8_t di_pad3[2]; /* unused in v2/3 inodes */ + uint32_t di_uid; /* owner's user id */ + uint32_t di_gid; /* owner's group id */ + uint32_t di_nlink; /* number of links to file */ + uint16_t di_projid_lo; /* lower part of owner's project id */ + uint16_t di_projid_hi; /* higher part of owner's project id */ + union { + /* Number of data fork extents if NREXT64 is set */ + uint64_t di_big_nextents; + + /* Padding for V3 inodes without NREXT64 set. */ + uint64_t di_v3_pad; + + /* Padding and inode flush counter for V2 inodes. */ + struct { + uint8_t di_v2_pad[6]; /* V2 inode zeroed space */ + uint16_t di_flushiter; /* V2 inode incremented on flush */ + }; + }; + xfs_log_timestamp_t di_atime; /* time last accessed */ + xfs_log_timestamp_t di_mtime; /* time last modified */ + xfs_log_timestamp_t di_ctime; /* time created/inode modified */ + xfs_fsize_t di_size; /* number of bytes in file */ + xfs_rfsblock_t di_nblocks; /* # of direct & btree blocks used */ + xfs_extlen_t di_extsize; /* basic/minimum extent size for file */ + union { + /* + * For V2 inodes and V3 inodes without NREXT64 set, this + * is the number of data and attr fork extents. + */ + struct { + uint32_t di_nextents; + uint16_t di_anextents; + } __packed; + + /* Number of attr fork extents if NREXT64 is set. */ + struct { + uint32_t di_big_anextents; + uint16_t di_nrext64_pad; + } __packed; + } __packed; + uint8_t di_forkoff; /* attr fork offs, <<3 for 64b align */ + int8_t di_aformat; /* format of attr fork's data */ + uint32_t di_dmevmask; /* DMIG event mask */ + uint16_t di_dmstate; /* DMIG state info */ + uint16_t di_flags; /* random flags, XFS_DIFLAG_... */ + uint32_t di_gen; /* generation number */ + + /* di_next_unlinked is the only non-core field in the old dinode */ + xfs_agino_t di_next_unlinked;/* agi unlinked list ptr */ + + /* start of the extended dinode, writable fields */ + uint32_t di_crc; /* CRC of the inode */ + uint64_t di_changecount; /* number of attribute changes */ + + /* + * The LSN we write to this field during formatting is not a reflection + * of the current on-disk LSN. It should never be used for recovery + * sequencing, nor should it be recovered into the on-disk inode at all. + * See xlog_recover_inode_commit_pass2() and xfs_log_dinode_to_disk() + * for details. + */ + xfs_lsn_t di_lsn; + + uint64_t di_flags2; /* more random flags */ + uint32_t di_cowextsize; /* basic cow extent size for file */ + uint8_t di_pad2[12]; /* more padding for future expansion */ + + /* fields only written to during inode creation */ + xfs_log_timestamp_t di_crtime; /* time created */ + xfs_ino_t di_ino; /* inode number */ + uuid_t di_uuid; /* UUID of the filesystem */ + + /* structure must be padded to 64 bit alignment */ +}; + +#define xfs_log_dinode_size(mp) \ + (xfs_has_v3inodes((mp)) ? \ + sizeof(struct xfs_log_dinode) : \ + offsetof(struct xfs_log_dinode, di_next_unlinked)) + +/* + * Buffer Log Format definitions + * + * These are the physical dirty bitmap definitions for the log format structure. + */ +#define XFS_BLF_CHUNK 128 +#define XFS_BLF_SHIFT 7 +#define BIT_TO_WORD_SHIFT 5 +#define NBWORD (NBBY * sizeof(unsigned int)) + +/* + * This flag indicates that the buffer contains on disk inodes + * and requires special recovery handling. + */ +#define XFS_BLF_INODE_BUF (1<<0) + +/* + * This flag indicates that the buffer should not be replayed + * during recovery because its blocks are being freed. + */ +#define XFS_BLF_CANCEL (1<<1) + +/* + * This flag indicates that the buffer contains on disk + * user or group dquots and may require special recovery handling. + */ +#define XFS_BLF_UDQUOT_BUF (1<<2) +#define XFS_BLF_PDQUOT_BUF (1<<3) +#define XFS_BLF_GDQUOT_BUF (1<<4) + +/* + * This is the structure used to lay out a buf log item in the log. The data + * map describes which 128 byte chunks of the buffer have been logged. + * + * The placement of blf_map_size causes blf_data_map to start at an odd + * multiple of sizeof(unsigned int) offset within the struct. Because the data + * bitmap size will always be an even number, the end of the data_map (and + * therefore the structure) will also be at an odd multiple of sizeof(unsigned + * int). Some 64-bit compilers will insert padding at the end of the struct to + * ensure 64-bit alignment of blf_blkno, but 32-bit ones will not. Therefore, + * XFS_BLF_DATAMAP_SIZE must be an odd number to make the padding explicit and + * keep the structure size consistent between 32-bit and 64-bit platforms. + */ +#define __XFS_BLF_DATAMAP_SIZE ((XFS_MAX_BLOCKSIZE / XFS_BLF_CHUNK) / NBWORD) +#define XFS_BLF_DATAMAP_SIZE (__XFS_BLF_DATAMAP_SIZE + 1) + +typedef struct xfs_buf_log_format { + unsigned short blf_type; /* buf log item type indicator */ + unsigned short blf_size; /* size of this item */ + unsigned short blf_flags; /* misc state */ + unsigned short blf_len; /* number of blocks in this buf */ + int64_t blf_blkno; /* starting blkno of this buf */ + unsigned int blf_map_size; /* used size of data bitmap in words */ + unsigned int blf_data_map[XFS_BLF_DATAMAP_SIZE]; /* dirty bitmap */ +} xfs_buf_log_format_t; + +/* + * All buffers now need to tell recovery where the magic number + * is so that it can verify and calculate the CRCs on the buffer correctly + * once the changes have been replayed into the buffer. + * + * The type value is held in the upper 5 bits of the blf_flags field, which is + * an unsigned 16 bit field. Hence we need to shift it 11 bits up and down. + */ +#define XFS_BLFT_BITS 5 +#define XFS_BLFT_SHIFT 11 +#define XFS_BLFT_MASK (((1 << XFS_BLFT_BITS) - 1) << XFS_BLFT_SHIFT) + +enum xfs_blft { + XFS_BLFT_UNKNOWN_BUF = 0, + XFS_BLFT_UDQUOT_BUF, + XFS_BLFT_PDQUOT_BUF, + XFS_BLFT_GDQUOT_BUF, + XFS_BLFT_BTREE_BUF, + XFS_BLFT_AGF_BUF, + XFS_BLFT_AGFL_BUF, + XFS_BLFT_AGI_BUF, + XFS_BLFT_DINO_BUF, + XFS_BLFT_SYMLINK_BUF, + XFS_BLFT_DIR_BLOCK_BUF, + XFS_BLFT_DIR_DATA_BUF, + XFS_BLFT_DIR_FREE_BUF, + XFS_BLFT_DIR_LEAF1_BUF, + XFS_BLFT_DIR_LEAFN_BUF, + XFS_BLFT_DA_NODE_BUF, + XFS_BLFT_ATTR_LEAF_BUF, + XFS_BLFT_ATTR_RMT_BUF, + XFS_BLFT_SB_BUF, + XFS_BLFT_RTBITMAP_BUF, + XFS_BLFT_RTSUMMARY_BUF, + XFS_BLFT_MAX_BUF = (1 << XFS_BLFT_BITS), +}; + +static inline void +xfs_blft_to_flags(struct xfs_buf_log_format *blf, enum xfs_blft type) +{ + ASSERT(type > XFS_BLFT_UNKNOWN_BUF && type < XFS_BLFT_MAX_BUF); + blf->blf_flags &= ~XFS_BLFT_MASK; + blf->blf_flags |= ((type << XFS_BLFT_SHIFT) & XFS_BLFT_MASK); +} + +static inline uint16_t +xfs_blft_from_flags(struct xfs_buf_log_format *blf) +{ + return (blf->blf_flags & XFS_BLFT_MASK) >> XFS_BLFT_SHIFT; +} + +/* + * EFI/EFD log format definitions + */ +typedef struct xfs_extent { + xfs_fsblock_t ext_start; + xfs_extlen_t ext_len; +} xfs_extent_t; + +/* + * Since an xfs_extent_t has types (start:64, len: 32) + * there are different alignments on 32 bit and 64 bit kernels. + * So we provide the different variants for use by a + * conversion routine. + */ +typedef struct xfs_extent_32 { + uint64_t ext_start; + uint32_t ext_len; +} __attribute__((packed)) xfs_extent_32_t; + +typedef struct xfs_extent_64 { + uint64_t ext_start; + uint32_t ext_len; + uint32_t ext_pad; +} xfs_extent_64_t; + +/* + * This is the structure used to lay out an efi log item in the + * log. The efi_extents field is a variable size array whose + * size is given by efi_nextents. + */ +typedef struct xfs_efi_log_format { + uint16_t efi_type; /* efi log item type */ + uint16_t efi_size; /* size of this item */ + uint32_t efi_nextents; /* # extents to free */ + uint64_t efi_id; /* efi identifier */ + xfs_extent_t efi_extents[]; /* array of extents to free */ +} xfs_efi_log_format_t; + +static inline size_t +xfs_efi_log_format_sizeof( + unsigned int nr) +{ + return sizeof(struct xfs_efi_log_format) + + nr * sizeof(struct xfs_extent); +} + +typedef struct xfs_efi_log_format_32 { + uint16_t efi_type; /* efi log item type */ + uint16_t efi_size; /* size of this item */ + uint32_t efi_nextents; /* # extents to free */ + uint64_t efi_id; /* efi identifier */ + xfs_extent_32_t efi_extents[]; /* array of extents to free */ +} __attribute__((packed)) xfs_efi_log_format_32_t; + +static inline size_t +xfs_efi_log_format32_sizeof( + unsigned int nr) +{ + return sizeof(struct xfs_efi_log_format_32) + + nr * sizeof(struct xfs_extent_32); +} + +typedef struct xfs_efi_log_format_64 { + uint16_t efi_type; /* efi log item type */ + uint16_t efi_size; /* size of this item */ + uint32_t efi_nextents; /* # extents to free */ + uint64_t efi_id; /* efi identifier */ + xfs_extent_64_t efi_extents[]; /* array of extents to free */ +} xfs_efi_log_format_64_t; + +static inline size_t +xfs_efi_log_format64_sizeof( + unsigned int nr) +{ + return sizeof(struct xfs_efi_log_format_64) + + nr * sizeof(struct xfs_extent_64); +} + +/* + * This is the structure used to lay out an efd log item in the + * log. The efd_extents array is a variable size array whose + * size is given by efd_nextents; + */ +typedef struct xfs_efd_log_format { + uint16_t efd_type; /* efd log item type */ + uint16_t efd_size; /* size of this item */ + uint32_t efd_nextents; /* # of extents freed */ + uint64_t efd_efi_id; /* id of corresponding efi */ + xfs_extent_t efd_extents[]; /* array of extents freed */ +} xfs_efd_log_format_t; + +static inline size_t +xfs_efd_log_format_sizeof( + unsigned int nr) +{ + return sizeof(struct xfs_efd_log_format) + + nr * sizeof(struct xfs_extent); +} + +typedef struct xfs_efd_log_format_32 { + uint16_t efd_type; /* efd log item type */ + uint16_t efd_size; /* size of this item */ + uint32_t efd_nextents; /* # of extents freed */ + uint64_t efd_efi_id; /* id of corresponding efi */ + xfs_extent_32_t efd_extents[]; /* array of extents freed */ +} __attribute__((packed)) xfs_efd_log_format_32_t; + +static inline size_t +xfs_efd_log_format32_sizeof( + unsigned int nr) +{ + return sizeof(struct xfs_efd_log_format_32) + + nr * sizeof(struct xfs_extent_32); +} + +typedef struct xfs_efd_log_format_64 { + uint16_t efd_type; /* efd log item type */ + uint16_t efd_size; /* size of this item */ + uint32_t efd_nextents; /* # of extents freed */ + uint64_t efd_efi_id; /* id of corresponding efi */ + xfs_extent_64_t efd_extents[]; /* array of extents freed */ +} xfs_efd_log_format_64_t; + +static inline size_t +xfs_efd_log_format64_sizeof( + unsigned int nr) +{ + return sizeof(struct xfs_efd_log_format_64) + + nr * sizeof(struct xfs_extent_64); +} + +/* + * RUI/RUD (reverse mapping) log format definitions + */ +struct xfs_map_extent { + uint64_t me_owner; + uint64_t me_startblock; + uint64_t me_startoff; + uint32_t me_len; + uint32_t me_flags; +}; + +/* rmap me_flags: upper bits are flags, lower byte is type code */ +#define XFS_RMAP_EXTENT_MAP 1 +#define XFS_RMAP_EXTENT_MAP_SHARED 2 +#define XFS_RMAP_EXTENT_UNMAP 3 +#define XFS_RMAP_EXTENT_UNMAP_SHARED 4 +#define XFS_RMAP_EXTENT_CONVERT 5 +#define XFS_RMAP_EXTENT_CONVERT_SHARED 6 +#define XFS_RMAP_EXTENT_ALLOC 7 +#define XFS_RMAP_EXTENT_FREE 8 +#define XFS_RMAP_EXTENT_TYPE_MASK 0xFF + +#define XFS_RMAP_EXTENT_ATTR_FORK (1U << 31) +#define XFS_RMAP_EXTENT_BMBT_BLOCK (1U << 30) +#define XFS_RMAP_EXTENT_UNWRITTEN (1U << 29) + +#define XFS_RMAP_EXTENT_FLAGS (XFS_RMAP_EXTENT_TYPE_MASK | \ + XFS_RMAP_EXTENT_ATTR_FORK | \ + XFS_RMAP_EXTENT_BMBT_BLOCK | \ + XFS_RMAP_EXTENT_UNWRITTEN) + +/* + * This is the structure used to lay out an rui log item in the + * log. The rui_extents field is a variable size array whose + * size is given by rui_nextents. + */ +struct xfs_rui_log_format { + uint16_t rui_type; /* rui log item type */ + uint16_t rui_size; /* size of this item */ + uint32_t rui_nextents; /* # extents to free */ + uint64_t rui_id; /* rui identifier */ + struct xfs_map_extent rui_extents[]; /* array of extents to rmap */ +}; + +static inline size_t +xfs_rui_log_format_sizeof( + unsigned int nr) +{ + return sizeof(struct xfs_rui_log_format) + + nr * sizeof(struct xfs_map_extent); +} + +/* + * This is the structure used to lay out an rud log item in the + * log. The rud_extents array is a variable size array whose + * size is given by rud_nextents; + */ +struct xfs_rud_log_format { + uint16_t rud_type; /* rud log item type */ + uint16_t rud_size; /* size of this item */ + uint32_t __pad; + uint64_t rud_rui_id; /* id of corresponding rui */ +}; + +/* + * CUI/CUD (refcount update) log format definitions + */ +struct xfs_phys_extent { + uint64_t pe_startblock; + uint32_t pe_len; + uint32_t pe_flags; +}; + +/* refcount pe_flags: upper bits are flags, lower byte is type code */ +/* Type codes are taken directly from enum xfs_refcount_intent_type. */ +#define XFS_REFCOUNT_EXTENT_TYPE_MASK 0xFF + +#define XFS_REFCOUNT_EXTENT_FLAGS (XFS_REFCOUNT_EXTENT_TYPE_MASK) + +/* + * This is the structure used to lay out a cui log item in the + * log. The cui_extents field is a variable size array whose + * size is given by cui_nextents. + */ +struct xfs_cui_log_format { + uint16_t cui_type; /* cui log item type */ + uint16_t cui_size; /* size of this item */ + uint32_t cui_nextents; /* # extents to free */ + uint64_t cui_id; /* cui identifier */ + struct xfs_phys_extent cui_extents[]; /* array of extents */ +}; + +static inline size_t +xfs_cui_log_format_sizeof( + unsigned int nr) +{ + return sizeof(struct xfs_cui_log_format) + + nr * sizeof(struct xfs_phys_extent); +} + +/* + * This is the structure used to lay out a cud log item in the + * log. The cud_extents array is a variable size array whose + * size is given by cud_nextents; + */ +struct xfs_cud_log_format { + uint16_t cud_type; /* cud log item type */ + uint16_t cud_size; /* size of this item */ + uint32_t __pad; + uint64_t cud_cui_id; /* id of corresponding cui */ +}; + +/* + * BUI/BUD (inode block mapping) log format definitions + */ + +/* bmbt me_flags: upper bits are flags, lower byte is type code */ +/* Type codes are taken directly from enum xfs_bmap_intent_type. */ +#define XFS_BMAP_EXTENT_TYPE_MASK 0xFF + +#define XFS_BMAP_EXTENT_ATTR_FORK (1U << 31) +#define XFS_BMAP_EXTENT_UNWRITTEN (1U << 30) + +#define XFS_BMAP_EXTENT_FLAGS (XFS_BMAP_EXTENT_TYPE_MASK | \ + XFS_BMAP_EXTENT_ATTR_FORK | \ + XFS_BMAP_EXTENT_UNWRITTEN) + +/* + * This is the structure used to lay out an bui log item in the + * log. The bui_extents field is a variable size array whose + * size is given by bui_nextents. + */ +struct xfs_bui_log_format { + uint16_t bui_type; /* bui log item type */ + uint16_t bui_size; /* size of this item */ + uint32_t bui_nextents; /* # extents to free */ + uint64_t bui_id; /* bui identifier */ + struct xfs_map_extent bui_extents[]; /* array of extents to bmap */ +}; + +static inline size_t +xfs_bui_log_format_sizeof( + unsigned int nr) +{ + return sizeof(struct xfs_bui_log_format) + + nr * sizeof(struct xfs_map_extent); +} + +/* + * This is the structure used to lay out an bud log item in the + * log. The bud_extents array is a variable size array whose + * size is given by bud_nextents; + */ +struct xfs_bud_log_format { + uint16_t bud_type; /* bud log item type */ + uint16_t bud_size; /* size of this item */ + uint32_t __pad; + uint64_t bud_bui_id; /* id of corresponding bui */ +}; + +/* + * Dquot Log format definitions. + * + * The first two fields must be the type and size fitting into + * 32 bits : log_recovery code assumes that. + */ +typedef struct xfs_dq_logformat { + uint16_t qlf_type; /* dquot log item type */ + uint16_t qlf_size; /* size of this item */ + xfs_dqid_t qlf_id; /* usr/grp/proj id : 32 bits */ + int64_t qlf_blkno; /* blkno of dquot buffer */ + int32_t qlf_len; /* len of dquot buffer */ + uint32_t qlf_boffset; /* off of dquot in buffer */ +} xfs_dq_logformat_t; + +/* + * log format struct for QUOTAOFF records. + * The first two fields must be the type and size fitting into + * 32 bits : log_recovery code assumes that. + * We write two LI_QUOTAOFF logitems per quotaoff, the last one keeps a pointer + * to the first and ensures that the first logitem is taken out of the AIL + * only when the last one is securely committed. + */ +typedef struct xfs_qoff_logformat { + unsigned short qf_type; /* quotaoff log item type */ + unsigned short qf_size; /* size of this item */ + unsigned int qf_flags; /* USR and/or GRP */ + char qf_pad[12]; /* padding for future */ +} xfs_qoff_logformat_t; + +/* + * Disk quotas status in m_qflags, and also sb_qflags. 16 bits. + */ +#define XFS_UQUOTA_ACCT 0x0001 /* user quota accounting ON */ +#define XFS_UQUOTA_ENFD 0x0002 /* user quota limits enforced */ +#define XFS_UQUOTA_CHKD 0x0004 /* quotacheck run on usr quotas */ +#define XFS_PQUOTA_ACCT 0x0008 /* project quota accounting ON */ +#define XFS_OQUOTA_ENFD 0x0010 /* other (grp/prj) quota limits enforced */ +#define XFS_OQUOTA_CHKD 0x0020 /* quotacheck run on other (grp/prj) quotas */ +#define XFS_GQUOTA_ACCT 0x0040 /* group quota accounting ON */ + +/* + * Conversion to and from the combined OQUOTA flag (if necessary) + * is done only in xfs_sb_qflags_to_disk() and xfs_sb_qflags_from_disk() + */ +#define XFS_GQUOTA_ENFD 0x0080 /* group quota limits enforced */ +#define XFS_GQUOTA_CHKD 0x0100 /* quotacheck run on group quotas */ +#define XFS_PQUOTA_ENFD 0x0200 /* project quota limits enforced */ +#define XFS_PQUOTA_CHKD 0x0400 /* quotacheck run on project quotas */ + +#define XFS_ALL_QUOTA_ACCT \ + (XFS_UQUOTA_ACCT | XFS_GQUOTA_ACCT | XFS_PQUOTA_ACCT) +#define XFS_ALL_QUOTA_ENFD \ + (XFS_UQUOTA_ENFD | XFS_GQUOTA_ENFD | XFS_PQUOTA_ENFD) +#define XFS_ALL_QUOTA_CHKD \ + (XFS_UQUOTA_CHKD | XFS_GQUOTA_CHKD | XFS_PQUOTA_CHKD) + +#define XFS_MOUNT_QUOTA_ALL (XFS_UQUOTA_ACCT|XFS_UQUOTA_ENFD|\ + XFS_UQUOTA_CHKD|XFS_GQUOTA_ACCT|\ + XFS_GQUOTA_ENFD|XFS_GQUOTA_CHKD|\ + XFS_PQUOTA_ACCT|XFS_PQUOTA_ENFD|\ + XFS_PQUOTA_CHKD) + +/* + * Inode create log item structure + * + * Log recovery assumes the first two entries are the type and size and they fit + * in 32 bits. Also in host order (ugh) so they have to be 32 bit aligned so + * decoding can be done correctly. + */ +struct xfs_icreate_log { + uint16_t icl_type; /* type of log format structure */ + uint16_t icl_size; /* size of log format structure */ + __be32 icl_ag; /* ag being allocated in */ + __be32 icl_agbno; /* start block of inode range */ + __be32 icl_count; /* number of inodes to initialise */ + __be32 icl_isize; /* size of inodes */ + __be32 icl_length; /* length of extent to initialise */ + __be32 icl_gen; /* inode generation number to use */ +}; + +/* + * Flags for deferred attribute operations. + * Upper bits are flags, lower byte is type code + */ +#define XFS_ATTRI_OP_FLAGS_SET 1 /* Set the attribute */ +#define XFS_ATTRI_OP_FLAGS_REMOVE 2 /* Remove the attribute */ +#define XFS_ATTRI_OP_FLAGS_REPLACE 3 /* Replace the attribute */ +#define XFS_ATTRI_OP_FLAGS_TYPE_MASK 0xFF /* Flags type mask */ + +/* + * alfi_attr_filter captures the state of xfs_da_args.attr_filter, so it should + * never have any other bits set. + */ +#define XFS_ATTRI_FILTER_MASK (XFS_ATTR_ROOT | \ + XFS_ATTR_SECURE | \ + XFS_ATTR_INCOMPLETE) + +/* + * This is the structure used to lay out an attr log item in the + * log. + */ +struct xfs_attri_log_format { + uint16_t alfi_type; /* attri log item type */ + uint16_t alfi_size; /* size of this item */ + uint32_t __pad; /* pad to 64 bit aligned */ + uint64_t alfi_id; /* attri identifier */ + uint64_t alfi_ino; /* the inode for this attr operation */ + uint32_t alfi_op_flags; /* marks the op as a set or remove */ + uint32_t alfi_name_len; /* attr name length */ + uint32_t alfi_value_len; /* attr value length */ + uint32_t alfi_attr_filter;/* attr filter flags */ +}; + +struct xfs_attrd_log_format { + uint16_t alfd_type; /* attrd log item type */ + uint16_t alfd_size; /* size of this item */ + uint32_t __pad; /* pad to 64 bit aligned */ + uint64_t alfd_alf_id; /* id of corresponding attri */ +}; + +#endif /* __XFS_LOG_FORMAT_H__ */ -- cgit v1.2.3