From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- include/drm/drm_mipi_dsi.h | 362 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 362 insertions(+) create mode 100644 include/drm/drm_mipi_dsi.h (limited to 'include/drm/drm_mipi_dsi.h') diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h new file mode 100644 index 000000000..9054a5185 --- /dev/null +++ b/include/drm/drm_mipi_dsi.h @@ -0,0 +1,362 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * MIPI DSI Bus + * + * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd. + * Andrzej Hajda + */ + +#ifndef __DRM_MIPI_DSI_H__ +#define __DRM_MIPI_DSI_H__ + +#include + +struct mipi_dsi_host; +struct mipi_dsi_device; +struct drm_dsc_picture_parameter_set; + +/* request ACK from peripheral */ +#define MIPI_DSI_MSG_REQ_ACK BIT(0) +/* use Low Power Mode to transmit message */ +#define MIPI_DSI_MSG_USE_LPM BIT(1) + +/** + * struct mipi_dsi_msg - read/write DSI buffer + * @channel: virtual channel id + * @type: payload data type + * @flags: flags controlling this message transmission + * @tx_len: length of @tx_buf + * @tx_buf: data to be written + * @rx_len: length of @rx_buf + * @rx_buf: data to be read, or NULL + */ +struct mipi_dsi_msg { + u8 channel; + u8 type; + u16 flags; + + size_t tx_len; + const void *tx_buf; + + size_t rx_len; + void *rx_buf; +}; + +bool mipi_dsi_packet_format_is_short(u8 type); +bool mipi_dsi_packet_format_is_long(u8 type); + +/** + * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format + * @size: size (in bytes) of the packet + * @header: the four bytes that make up the header (Data ID, Word Count or + * Packet Data, and ECC) + * @payload_length: number of bytes in the payload + * @payload: a pointer to a buffer containing the payload, if any + */ +struct mipi_dsi_packet { + size_t size; + u8 header[4]; + size_t payload_length; + const u8 *payload; +}; + +int mipi_dsi_create_packet(struct mipi_dsi_packet *packet, + const struct mipi_dsi_msg *msg); + +/** + * struct mipi_dsi_host_ops - DSI bus operations + * @attach: attach DSI device to DSI host + * @detach: detach DSI device from DSI host + * @transfer: transmit a DSI packet + * + * DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg + * structures. This structure contains information about the type of packet + * being transmitted as well as the transmit and receive buffers. When an + * error is encountered during transmission, this function will return a + * negative error code. On success it shall return the number of bytes + * transmitted for write packets or the number of bytes received for read + * packets. + * + * Note that typically DSI packet transmission is atomic, so the .transfer() + * function will seldomly return anything other than the number of bytes + * contained in the transmit buffer on success. + * + * Also note that those callbacks can be called no matter the state the + * host is in. Drivers that need the underlying device to be powered to + * perform these operations will first need to make sure it's been + * properly enabled. + */ +struct mipi_dsi_host_ops { + int (*attach)(struct mipi_dsi_host *host, + struct mipi_dsi_device *dsi); + int (*detach)(struct mipi_dsi_host *host, + struct mipi_dsi_device *dsi); + ssize_t (*transfer)(struct mipi_dsi_host *host, + const struct mipi_dsi_msg *msg); +}; + +/** + * struct mipi_dsi_host - DSI host device + * @dev: driver model device node for this DSI host + * @ops: DSI host operations + * @list: list management + */ +struct mipi_dsi_host { + struct device *dev; + const struct mipi_dsi_host_ops *ops; + struct list_head list; +}; + +int mipi_dsi_host_register(struct mipi_dsi_host *host); +void mipi_dsi_host_unregister(struct mipi_dsi_host *host); +struct mipi_dsi_host *of_find_mipi_dsi_host_by_node(struct device_node *node); + +/* DSI mode flags */ + +/* video mode */ +#define MIPI_DSI_MODE_VIDEO BIT(0) +/* video burst mode */ +#define MIPI_DSI_MODE_VIDEO_BURST BIT(1) +/* video pulse mode */ +#define MIPI_DSI_MODE_VIDEO_SYNC_PULSE BIT(2) +/* enable auto vertical count mode */ +#define MIPI_DSI_MODE_VIDEO_AUTO_VERT BIT(3) +/* enable hsync-end packets in vsync-pulse and v-porch area */ +#define MIPI_DSI_MODE_VIDEO_HSE BIT(4) +/* disable hfront-porch area */ +#define MIPI_DSI_MODE_VIDEO_NO_HFP BIT(5) +/* disable hback-porch area */ +#define MIPI_DSI_MODE_VIDEO_NO_HBP BIT(6) +/* disable hsync-active area */ +#define MIPI_DSI_MODE_VIDEO_NO_HSA BIT(7) +/* flush display FIFO on vsync pulse */ +#define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8) +/* disable EoT packets in HS mode */ +#define MIPI_DSI_MODE_NO_EOT_PACKET BIT(9) +/* device supports non-continuous clock behavior (DSI spec 5.6.1) */ +#define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10) +/* transmit data in low power */ +#define MIPI_DSI_MODE_LPM BIT(11) +/* transmit data ending at the same time for all lanes within one hsync */ +#define MIPI_DSI_HS_PKT_END_ALIGNED BIT(12) + +enum mipi_dsi_pixel_format { + MIPI_DSI_FMT_RGB888, + MIPI_DSI_FMT_RGB666, + MIPI_DSI_FMT_RGB666_PACKED, + MIPI_DSI_FMT_RGB565, +}; + +#define DSI_DEV_NAME_SIZE 20 + +/** + * struct mipi_dsi_device_info - template for creating a mipi_dsi_device + * @type: DSI peripheral chip type + * @channel: DSI virtual channel assigned to peripheral + * @node: pointer to OF device node or NULL + * + * This is populated and passed to mipi_dsi_device_new to create a new + * DSI device + */ +struct mipi_dsi_device_info { + char type[DSI_DEV_NAME_SIZE]; + u32 channel; + struct device_node *node; +}; + +/** + * struct mipi_dsi_device - DSI peripheral device + * @host: DSI host for this peripheral + * @dev: driver model device node for this peripheral + * @name: DSI peripheral chip type + * @channel: virtual channel assigned to the peripheral + * @format: pixel format for video mode + * @lanes: number of active data lanes + * @mode_flags: DSI operation mode related flags + * @hs_rate: maximum lane frequency for high speed mode in hertz, this should + * be set to the real limits of the hardware, zero is only accepted for + * legacy drivers + * @lp_rate: maximum lane frequency for low power mode in hertz, this should + * be set to the real limits of the hardware, zero is only accepted for + * legacy drivers + * @dsc: panel/bridge DSC pps payload to be sent + */ +struct mipi_dsi_device { + struct mipi_dsi_host *host; + struct device dev; + + char name[DSI_DEV_NAME_SIZE]; + unsigned int channel; + unsigned int lanes; + enum mipi_dsi_pixel_format format; + unsigned long mode_flags; + unsigned long hs_rate; + unsigned long lp_rate; + struct drm_dsc_config *dsc; +}; + +#define MIPI_DSI_MODULE_PREFIX "mipi-dsi:" + +static inline struct mipi_dsi_device *to_mipi_dsi_device(struct device *dev) +{ + return container_of(dev, struct mipi_dsi_device, dev); +} + +/** + * mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any + * given pixel format defined by the MIPI DSI + * specification + * @fmt: MIPI DSI pixel format + * + * Returns: The number of bits per pixel of the given pixel format. + */ +static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt) +{ + switch (fmt) { + case MIPI_DSI_FMT_RGB888: + case MIPI_DSI_FMT_RGB666: + return 24; + + case MIPI_DSI_FMT_RGB666_PACKED: + return 18; + + case MIPI_DSI_FMT_RGB565: + return 16; + } + + return -EINVAL; +} + +struct mipi_dsi_device * +mipi_dsi_device_register_full(struct mipi_dsi_host *host, + const struct mipi_dsi_device_info *info); +void mipi_dsi_device_unregister(struct mipi_dsi_device *dsi); +struct mipi_dsi_device * +devm_mipi_dsi_device_register_full(struct device *dev, struct mipi_dsi_host *host, + const struct mipi_dsi_device_info *info); +struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np); +int mipi_dsi_attach(struct mipi_dsi_device *dsi); +int mipi_dsi_detach(struct mipi_dsi_device *dsi); +int devm_mipi_dsi_attach(struct device *dev, struct mipi_dsi_device *dsi); +int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi); +int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi); +int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi, + u16 value); +ssize_t mipi_dsi_compression_mode(struct mipi_dsi_device *dsi, bool enable); +ssize_t mipi_dsi_picture_parameter_set(struct mipi_dsi_device *dsi, + const struct drm_dsc_picture_parameter_set *pps); + +ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload, + size_t size); +ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params, + size_t num_params, void *data, size_t size); + +/** + * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode + * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking + * information only + * @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both + * V-Blanking and H-Blanking information + */ +enum mipi_dsi_dcs_tear_mode { + MIPI_DSI_DCS_TEAR_MODE_VBLANK, + MIPI_DSI_DCS_TEAR_MODE_VHBLANK, +}; + +#define MIPI_DSI_DCS_POWER_MODE_DISPLAY (1 << 2) +#define MIPI_DSI_DCS_POWER_MODE_NORMAL (1 << 3) +#define MIPI_DSI_DCS_POWER_MODE_SLEEP (1 << 4) +#define MIPI_DSI_DCS_POWER_MODE_PARTIAL (1 << 5) +#define MIPI_DSI_DCS_POWER_MODE_IDLE (1 << 6) + +ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi, + const void *data, size_t len); +ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd, + const void *data, size_t len); +ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data, + size_t len); +int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode); +int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format); +int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start, + u16 end); +int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start, + u16 end); +int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi); +int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi, + enum mipi_dsi_dcs_tear_mode mode); +int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format); +int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline); +int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi, + u16 brightness); +int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi, + u16 *brightness); +int mipi_dsi_dcs_set_display_brightness_large(struct mipi_dsi_device *dsi, + u16 brightness); +int mipi_dsi_dcs_get_display_brightness_large(struct mipi_dsi_device *dsi, + u16 *brightness); + +/** + * mipi_dsi_dcs_write_seq - transmit a DCS command with payload + * @dsi: DSI peripheral device + * @cmd: Command + * @seq: buffer containing data to be transmitted + */ +#define mipi_dsi_dcs_write_seq(dsi, cmd, seq...) do { \ + static const u8 d[] = { cmd, seq }; \ + struct device *dev = &dsi->dev; \ + int ret; \ + ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \ + if (ret < 0) { \ + dev_err_ratelimited(dev, "sending command %#02x failed: %d\n", cmd, ret); \ + return ret; \ + } \ + } while (0) + +/** + * struct mipi_dsi_driver - DSI driver + * @driver: device driver model driver + * @probe: callback for device binding + * @remove: callback for device unbinding + * @shutdown: called at shutdown time to quiesce the device + */ +struct mipi_dsi_driver { + struct device_driver driver; + int(*probe)(struct mipi_dsi_device *dsi); + void (*remove)(struct mipi_dsi_device *dsi); + void (*shutdown)(struct mipi_dsi_device *dsi); +}; + +static inline struct mipi_dsi_driver * +to_mipi_dsi_driver(struct device_driver *driver) +{ + return container_of(driver, struct mipi_dsi_driver, driver); +} + +static inline void *mipi_dsi_get_drvdata(const struct mipi_dsi_device *dsi) +{ + return dev_get_drvdata(&dsi->dev); +} + +static inline void mipi_dsi_set_drvdata(struct mipi_dsi_device *dsi, void *data) +{ + dev_set_drvdata(&dsi->dev, data); +} + +int mipi_dsi_driver_register_full(struct mipi_dsi_driver *driver, + struct module *owner); +void mipi_dsi_driver_unregister(struct mipi_dsi_driver *driver); + +#define mipi_dsi_driver_register(driver) \ + mipi_dsi_driver_register_full(driver, THIS_MODULE) + +#define module_mipi_dsi_driver(__mipi_dsi_driver) \ + module_driver(__mipi_dsi_driver, mipi_dsi_driver_register, \ + mipi_dsi_driver_unregister) + +#endif /* __DRM_MIPI_DSI__ */ -- cgit v1.2.3