From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- include/linux/blk_types.h | 546 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 546 insertions(+) create mode 100644 include/linux/blk_types.h (limited to 'include/linux/blk_types.h') diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h new file mode 100644 index 000000000..e0b098089 --- /dev/null +++ b/include/linux/blk_types.h @@ -0,0 +1,546 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Block data types and constants. Directly include this file only to + * break include dependency loop. + */ +#ifndef __LINUX_BLK_TYPES_H +#define __LINUX_BLK_TYPES_H + +#include +#include +#include +#include + +struct bio_set; +struct bio; +struct bio_integrity_payload; +struct page; +struct io_context; +struct cgroup_subsys_state; +typedef void (bio_end_io_t) (struct bio *); +struct bio_crypt_ctx; + +/* + * The basic unit of block I/O is a sector. It is used in a number of contexts + * in Linux (blk, bio, genhd). The size of one sector is 512 = 2**9 + * bytes. Variables of type sector_t represent an offset or size that is a + * multiple of 512 bytes. Hence these two constants. + */ +#ifndef SECTOR_SHIFT +#define SECTOR_SHIFT 9 +#endif +#ifndef SECTOR_SIZE +#define SECTOR_SIZE (1 << SECTOR_SHIFT) +#endif + +#define PAGE_SECTORS_SHIFT (PAGE_SHIFT - SECTOR_SHIFT) +#define PAGE_SECTORS (1 << PAGE_SECTORS_SHIFT) +#define SECTOR_MASK (PAGE_SECTORS - 1) + +struct block_device { + sector_t bd_start_sect; + sector_t bd_nr_sectors; + struct disk_stats __percpu *bd_stats; + unsigned long bd_stamp; + bool bd_read_only; /* read-only policy */ + dev_t bd_dev; + atomic_t bd_openers; + struct inode * bd_inode; /* will die */ + struct super_block * bd_super; + void * bd_claiming; + struct device bd_device; + void * bd_holder; + int bd_holders; + bool bd_write_holder; + struct kobject *bd_holder_dir; + u8 bd_partno; + spinlock_t bd_size_lock; /* for bd_inode->i_size updates */ + struct gendisk * bd_disk; + struct request_queue * bd_queue; + + /* The counter of freeze processes */ + int bd_fsfreeze_count; + /* Mutex for freeze */ + struct mutex bd_fsfreeze_mutex; + struct super_block *bd_fsfreeze_sb; + + struct partition_meta_info *bd_meta_info; +#ifdef CONFIG_FAIL_MAKE_REQUEST + bool bd_make_it_fail; +#endif +} __randomize_layout; + +#define bdev_whole(_bdev) \ + ((_bdev)->bd_disk->part0) + +#define dev_to_bdev(device) \ + container_of((device), struct block_device, bd_device) + +#define bdev_kobj(_bdev) \ + (&((_bdev)->bd_device.kobj)) + +/* + * Block error status values. See block/blk-core:blk_errors for the details. + * Alpha cannot write a byte atomically, so we need to use 32-bit value. + */ +#if defined(CONFIG_ALPHA) && !defined(__alpha_bwx__) +typedef u32 __bitwise blk_status_t; +typedef u32 blk_short_t; +#else +typedef u8 __bitwise blk_status_t; +typedef u16 blk_short_t; +#endif +#define BLK_STS_OK 0 +#define BLK_STS_NOTSUPP ((__force blk_status_t)1) +#define BLK_STS_TIMEOUT ((__force blk_status_t)2) +#define BLK_STS_NOSPC ((__force blk_status_t)3) +#define BLK_STS_TRANSPORT ((__force blk_status_t)4) +#define BLK_STS_TARGET ((__force blk_status_t)5) +#define BLK_STS_NEXUS ((__force blk_status_t)6) +#define BLK_STS_MEDIUM ((__force blk_status_t)7) +#define BLK_STS_PROTECTION ((__force blk_status_t)8) +#define BLK_STS_RESOURCE ((__force blk_status_t)9) +#define BLK_STS_IOERR ((__force blk_status_t)10) + +/* hack for device mapper, don't use elsewhere: */ +#define BLK_STS_DM_REQUEUE ((__force blk_status_t)11) + +/* + * BLK_STS_AGAIN should only be returned if RQF_NOWAIT is set + * and the bio would block (cf bio_wouldblock_error()) + */ +#define BLK_STS_AGAIN ((__force blk_status_t)12) + +/* + * BLK_STS_DEV_RESOURCE is returned from the driver to the block layer if + * device related resources are unavailable, but the driver can guarantee + * that the queue will be rerun in the future once resources become + * available again. This is typically the case for device specific + * resources that are consumed for IO. If the driver fails allocating these + * resources, we know that inflight (or pending) IO will free these + * resource upon completion. + * + * This is different from BLK_STS_RESOURCE in that it explicitly references + * a device specific resource. For resources of wider scope, allocation + * failure can happen without having pending IO. This means that we can't + * rely on request completions freeing these resources, as IO may not be in + * flight. Examples of that are kernel memory allocations, DMA mappings, or + * any other system wide resources. + */ +#define BLK_STS_DEV_RESOURCE ((__force blk_status_t)13) + +/* + * BLK_STS_ZONE_RESOURCE is returned from the driver to the block layer if zone + * related resources are unavailable, but the driver can guarantee the queue + * will be rerun in the future once the resources become available again. + * + * This is different from BLK_STS_DEV_RESOURCE in that it explicitly references + * a zone specific resource and IO to a different zone on the same device could + * still be served. Examples of that are zones that are write-locked, but a read + * to the same zone could be served. + */ +#define BLK_STS_ZONE_RESOURCE ((__force blk_status_t)14) + +/* + * BLK_STS_ZONE_OPEN_RESOURCE is returned from the driver in the completion + * path if the device returns a status indicating that too many zone resources + * are currently open. The same command should be successful if resubmitted + * after the number of open zones decreases below the device's limits, which is + * reported in the request_queue's max_open_zones. + */ +#define BLK_STS_ZONE_OPEN_RESOURCE ((__force blk_status_t)15) + +/* + * BLK_STS_ZONE_ACTIVE_RESOURCE is returned from the driver in the completion + * path if the device returns a status indicating that too many zone resources + * are currently active. The same command should be successful if resubmitted + * after the number of active zones decreases below the device's limits, which + * is reported in the request_queue's max_active_zones. + */ +#define BLK_STS_ZONE_ACTIVE_RESOURCE ((__force blk_status_t)16) + +/* + * BLK_STS_OFFLINE is returned from the driver when the target device is offline + * or is being taken offline. This could help differentiate the case where a + * device is intentionally being shut down from a real I/O error. + */ +#define BLK_STS_OFFLINE ((__force blk_status_t)17) + +/** + * blk_path_error - returns true if error may be path related + * @error: status the request was completed with + * + * Description: + * This classifies block error status into non-retryable errors and ones + * that may be successful if retried on a failover path. + * + * Return: + * %false - retrying failover path will not help + * %true - may succeed if retried + */ +static inline bool blk_path_error(blk_status_t error) +{ + switch (error) { + case BLK_STS_NOTSUPP: + case BLK_STS_NOSPC: + case BLK_STS_TARGET: + case BLK_STS_NEXUS: + case BLK_STS_MEDIUM: + case BLK_STS_PROTECTION: + return false; + } + + /* Anything else could be a path failure, so should be retried */ + return true; +} + +/* + * From most significant bit: + * 1 bit: reserved for other usage, see below + * 12 bits: original size of bio + * 51 bits: issue time of bio + */ +#define BIO_ISSUE_RES_BITS 1 +#define BIO_ISSUE_SIZE_BITS 12 +#define BIO_ISSUE_RES_SHIFT (64 - BIO_ISSUE_RES_BITS) +#define BIO_ISSUE_SIZE_SHIFT (BIO_ISSUE_RES_SHIFT - BIO_ISSUE_SIZE_BITS) +#define BIO_ISSUE_TIME_MASK ((1ULL << BIO_ISSUE_SIZE_SHIFT) - 1) +#define BIO_ISSUE_SIZE_MASK \ + (((1ULL << BIO_ISSUE_SIZE_BITS) - 1) << BIO_ISSUE_SIZE_SHIFT) +#define BIO_ISSUE_RES_MASK (~((1ULL << BIO_ISSUE_RES_SHIFT) - 1)) + +/* Reserved bit for blk-throtl */ +#define BIO_ISSUE_THROTL_SKIP_LATENCY (1ULL << 63) + +struct bio_issue { + u64 value; +}; + +static inline u64 __bio_issue_time(u64 time) +{ + return time & BIO_ISSUE_TIME_MASK; +} + +static inline u64 bio_issue_time(struct bio_issue *issue) +{ + return __bio_issue_time(issue->value); +} + +static inline sector_t bio_issue_size(struct bio_issue *issue) +{ + return ((issue->value & BIO_ISSUE_SIZE_MASK) >> BIO_ISSUE_SIZE_SHIFT); +} + +static inline void bio_issue_init(struct bio_issue *issue, + sector_t size) +{ + size &= (1ULL << BIO_ISSUE_SIZE_BITS) - 1; + issue->value = ((issue->value & BIO_ISSUE_RES_MASK) | + (ktime_get_ns() & BIO_ISSUE_TIME_MASK) | + ((u64)size << BIO_ISSUE_SIZE_SHIFT)); +} + +typedef __u32 __bitwise blk_opf_t; + +typedef unsigned int blk_qc_t; +#define BLK_QC_T_NONE -1U + +/* + * main unit of I/O for the block layer and lower layers (ie drivers and + * stacking drivers) + */ +struct bio { + struct bio *bi_next; /* request queue link */ + struct block_device *bi_bdev; + blk_opf_t bi_opf; /* bottom bits REQ_OP, top bits + * req_flags. + */ + unsigned short bi_flags; /* BIO_* below */ + unsigned short bi_ioprio; + blk_status_t bi_status; + atomic_t __bi_remaining; + + struct bvec_iter bi_iter; + + blk_qc_t bi_cookie; + bio_end_io_t *bi_end_io; + void *bi_private; +#ifdef CONFIG_BLK_CGROUP + /* + * Represents the association of the css and request_queue for the bio. + * If a bio goes direct to device, it will not have a blkg as it will + * not have a request_queue associated with it. The reference is put + * on release of the bio. + */ + struct blkcg_gq *bi_blkg; + struct bio_issue bi_issue; +#ifdef CONFIG_BLK_CGROUP_IOCOST + u64 bi_iocost_cost; +#endif +#endif + +#ifdef CONFIG_BLK_INLINE_ENCRYPTION + struct bio_crypt_ctx *bi_crypt_context; +#endif + + union { +#if defined(CONFIG_BLK_DEV_INTEGRITY) + struct bio_integrity_payload *bi_integrity; /* data integrity */ +#endif + }; + + unsigned short bi_vcnt; /* how many bio_vec's */ + + /* + * Everything starting with bi_max_vecs will be preserved by bio_reset() + */ + + unsigned short bi_max_vecs; /* max bvl_vecs we can hold */ + + atomic_t __bi_cnt; /* pin count */ + + struct bio_vec *bi_io_vec; /* the actual vec list */ + + struct bio_set *bi_pool; + + /* + * We can inline a number of vecs at the end of the bio, to avoid + * double allocations for a small number of bio_vecs. This member + * MUST obviously be kept at the very end of the bio. + */ + struct bio_vec bi_inline_vecs[]; +}; + +#define BIO_RESET_BYTES offsetof(struct bio, bi_max_vecs) +#define BIO_MAX_SECTORS (UINT_MAX >> SECTOR_SHIFT) + +/* + * bio flags + */ +enum { + BIO_NO_PAGE_REF, /* don't put release vec pages */ + BIO_CLONED, /* doesn't own data */ + BIO_BOUNCED, /* bio is a bounce bio */ + BIO_QUIET, /* Make BIO Quiet */ + BIO_CHAIN, /* chained bio, ->bi_remaining in effect */ + BIO_REFFED, /* bio has elevated ->bi_cnt */ + BIO_BPS_THROTTLED, /* This bio has already been subjected to + * throttling rules. Don't do it again. */ + BIO_TRACE_COMPLETION, /* bio_endio() should trace the final completion + * of this bio. */ + BIO_CGROUP_ACCT, /* has been accounted to a cgroup */ + BIO_QOS_THROTTLED, /* bio went through rq_qos throttle path */ + BIO_QOS_MERGED, /* but went through rq_qos merge path */ + BIO_REMAPPED, + BIO_ZONE_WRITE_LOCKED, /* Owns a zoned device zone write lock */ + BIO_FLAG_LAST +}; + +typedef __u32 __bitwise blk_mq_req_flags_t; + +#define REQ_OP_BITS 8 +#define REQ_OP_MASK (__force blk_opf_t)((1 << REQ_OP_BITS) - 1) +#define REQ_FLAG_BITS 24 + +/** + * enum req_op - Operations common to the bio and request structures. + * We use 8 bits for encoding the operation, and the remaining 24 for flags. + * + * The least significant bit of the operation number indicates the data + * transfer direction: + * + * - if the least significant bit is set transfers are TO the device + * - if the least significant bit is not set transfers are FROM the device + * + * If a operation does not transfer data the least significant bit has no + * meaning. + */ +enum req_op { + /* read sectors from the device */ + REQ_OP_READ = (__force blk_opf_t)0, + /* write sectors to the device */ + REQ_OP_WRITE = (__force blk_opf_t)1, + /* flush the volatile write cache */ + REQ_OP_FLUSH = (__force blk_opf_t)2, + /* discard sectors */ + REQ_OP_DISCARD = (__force blk_opf_t)3, + /* securely erase sectors */ + REQ_OP_SECURE_ERASE = (__force blk_opf_t)5, + /* write the zero filled sector many times */ + REQ_OP_WRITE_ZEROES = (__force blk_opf_t)9, + /* Open a zone */ + REQ_OP_ZONE_OPEN = (__force blk_opf_t)10, + /* Close a zone */ + REQ_OP_ZONE_CLOSE = (__force blk_opf_t)11, + /* Transition a zone to full */ + REQ_OP_ZONE_FINISH = (__force blk_opf_t)12, + /* write data at the current zone write pointer */ + REQ_OP_ZONE_APPEND = (__force blk_opf_t)13, + /* reset a zone write pointer */ + REQ_OP_ZONE_RESET = (__force blk_opf_t)15, + /* reset all the zone present on the device */ + REQ_OP_ZONE_RESET_ALL = (__force blk_opf_t)17, + + /* Driver private requests */ + REQ_OP_DRV_IN = (__force blk_opf_t)34, + REQ_OP_DRV_OUT = (__force blk_opf_t)35, + + REQ_OP_LAST = (__force blk_opf_t)36, +}; + +enum req_flag_bits { + __REQ_FAILFAST_DEV = /* no driver retries of device errors */ + REQ_OP_BITS, + __REQ_FAILFAST_TRANSPORT, /* no driver retries of transport errors */ + __REQ_FAILFAST_DRIVER, /* no driver retries of driver errors */ + __REQ_SYNC, /* request is sync (sync write or read) */ + __REQ_META, /* metadata io request */ + __REQ_PRIO, /* boost priority in cfq */ + __REQ_NOMERGE, /* don't touch this for merging */ + __REQ_IDLE, /* anticipate more IO after this one */ + __REQ_INTEGRITY, /* I/O includes block integrity payload */ + __REQ_FUA, /* forced unit access */ + __REQ_PREFLUSH, /* request for cache flush */ + __REQ_RAHEAD, /* read ahead, can fail anytime */ + __REQ_BACKGROUND, /* background IO */ + __REQ_NOWAIT, /* Don't wait if request will block */ + /* + * When a shared kthread needs to issue a bio for a cgroup, doing + * so synchronously can lead to priority inversions as the kthread + * can be trapped waiting for that cgroup. CGROUP_PUNT flag makes + * submit_bio() punt the actual issuing to a dedicated per-blkcg + * work item to avoid such priority inversions. + */ + __REQ_CGROUP_PUNT, + __REQ_POLLED, /* caller polls for completion using bio_poll */ + __REQ_ALLOC_CACHE, /* allocate IO from cache if available */ + __REQ_SWAP, /* swap I/O */ + __REQ_DRV, /* for driver use */ + + /* + * Command specific flags, keep last: + */ + /* for REQ_OP_WRITE_ZEROES: */ + __REQ_NOUNMAP, /* do not free blocks when zeroing */ + + __REQ_NR_BITS, /* stops here */ +}; + +#define REQ_FAILFAST_DEV \ + (__force blk_opf_t)(1ULL << __REQ_FAILFAST_DEV) +#define REQ_FAILFAST_TRANSPORT \ + (__force blk_opf_t)(1ULL << __REQ_FAILFAST_TRANSPORT) +#define REQ_FAILFAST_DRIVER \ + (__force blk_opf_t)(1ULL << __REQ_FAILFAST_DRIVER) +#define REQ_SYNC (__force blk_opf_t)(1ULL << __REQ_SYNC) +#define REQ_META (__force blk_opf_t)(1ULL << __REQ_META) +#define REQ_PRIO (__force blk_opf_t)(1ULL << __REQ_PRIO) +#define REQ_NOMERGE (__force blk_opf_t)(1ULL << __REQ_NOMERGE) +#define REQ_IDLE (__force blk_opf_t)(1ULL << __REQ_IDLE) +#define REQ_INTEGRITY (__force blk_opf_t)(1ULL << __REQ_INTEGRITY) +#define REQ_FUA (__force blk_opf_t)(1ULL << __REQ_FUA) +#define REQ_PREFLUSH (__force blk_opf_t)(1ULL << __REQ_PREFLUSH) +#define REQ_RAHEAD (__force blk_opf_t)(1ULL << __REQ_RAHEAD) +#define REQ_BACKGROUND (__force blk_opf_t)(1ULL << __REQ_BACKGROUND) +#define REQ_NOWAIT (__force blk_opf_t)(1ULL << __REQ_NOWAIT) +#define REQ_CGROUP_PUNT (__force blk_opf_t)(1ULL << __REQ_CGROUP_PUNT) + +#define REQ_NOUNMAP (__force blk_opf_t)(1ULL << __REQ_NOUNMAP) +#define REQ_POLLED (__force blk_opf_t)(1ULL << __REQ_POLLED) +#define REQ_ALLOC_CACHE (__force blk_opf_t)(1ULL << __REQ_ALLOC_CACHE) + +#define REQ_DRV (__force blk_opf_t)(1ULL << __REQ_DRV) +#define REQ_SWAP (__force blk_opf_t)(1ULL << __REQ_SWAP) + +#define REQ_FAILFAST_MASK \ + (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER) + +#define REQ_NOMERGE_FLAGS \ + (REQ_NOMERGE | REQ_PREFLUSH | REQ_FUA) + +enum stat_group { + STAT_READ, + STAT_WRITE, + STAT_DISCARD, + STAT_FLUSH, + + NR_STAT_GROUPS +}; + +static inline enum req_op bio_op(const struct bio *bio) +{ + return bio->bi_opf & REQ_OP_MASK; +} + +/* obsolete, don't use in new code */ +static inline void bio_set_op_attrs(struct bio *bio, enum req_op op, + blk_opf_t op_flags) +{ + bio->bi_opf = op | op_flags; +} + +static inline bool op_is_write(blk_opf_t op) +{ + return !!(op & (__force blk_opf_t)1); +} + +/* + * Check if the bio or request is one that needs special treatment in the + * flush state machine. + */ +static inline bool op_is_flush(blk_opf_t op) +{ + return op & (REQ_FUA | REQ_PREFLUSH); +} + +/* + * Reads are always treated as synchronous, as are requests with the FUA or + * PREFLUSH flag. Other operations may be marked as synchronous using the + * REQ_SYNC flag. + */ +static inline bool op_is_sync(blk_opf_t op) +{ + return (op & REQ_OP_MASK) == REQ_OP_READ || + (op & (REQ_SYNC | REQ_FUA | REQ_PREFLUSH)); +} + +static inline bool op_is_discard(blk_opf_t op) +{ + return (op & REQ_OP_MASK) == REQ_OP_DISCARD; +} + +/* + * Check if a bio or request operation is a zone management operation, with + * the exception of REQ_OP_ZONE_RESET_ALL which is treated as a special case + * due to its different handling in the block layer and device response in + * case of command failure. + */ +static inline bool op_is_zone_mgmt(enum req_op op) +{ + switch (op & REQ_OP_MASK) { + case REQ_OP_ZONE_RESET: + case REQ_OP_ZONE_OPEN: + case REQ_OP_ZONE_CLOSE: + case REQ_OP_ZONE_FINISH: + return true; + default: + return false; + } +} + +static inline int op_stat_group(enum req_op op) +{ + if (op_is_discard(op)) + return STAT_DISCARD; + return op_is_write(op); +} + +struct blk_rq_stat { + u64 mean; + u64 min; + u64 max; + u32 nr_samples; + u64 batch; +}; + +#endif /* __LINUX_BLK_TYPES_H */ -- cgit v1.2.3