From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- include/linux/pinctrl/pinctrl-state.h | 38 +++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 include/linux/pinctrl/pinctrl-state.h (limited to 'include/linux/pinctrl/pinctrl-state.h') diff --git a/include/linux/pinctrl/pinctrl-state.h b/include/linux/pinctrl/pinctrl-state.h new file mode 100644 index 000000000..635d97e92 --- /dev/null +++ b/include/linux/pinctrl/pinctrl-state.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Standard pin control state definitions + */ + +#ifndef __LINUX_PINCTRL_PINCTRL_STATE_H +#define __LINUX_PINCTRL_PINCTRL_STATE_H + +/** + * @PINCTRL_STATE_DEFAULT: the state the pinctrl handle shall be put + * into as default, usually this means the pins are up and ready to + * be used by the device driver. This state is commonly used by + * hogs to configure muxing and pins at boot, and also as a state + * to go into when returning from sleep and idle in + * .pm_runtime_resume() or ordinary .resume() for example. + * @PINCTRL_STATE_INIT: normally the pinctrl will be set to "default" + * before the driver's probe() function is called. There are some + * drivers where that is not appropriate becausing doing so would + * glitch the pins. In those cases you can add an "init" pinctrl + * which is the state of the pins before drive probe. After probe + * if the pins are still in "init" state they'll be moved to + * "default". + * @PINCTRL_STATE_IDLE: the state the pinctrl handle shall be put into + * when the pins are idle. This is a state where the system is relaxed + * but not fully sleeping - some power may be on but clocks gated for + * example. Could typically be set from a pm_runtime_suspend() or + * pm_runtime_idle() operation. + * @PINCTRL_STATE_SLEEP: the state the pinctrl handle shall be put into + * when the pins are sleeping. This is a state where the system is in + * its lowest sleep state. Could typically be set from an + * ordinary .suspend() function. + */ +#define PINCTRL_STATE_DEFAULT "default" +#define PINCTRL_STATE_INIT "init" +#define PINCTRL_STATE_IDLE "idle" +#define PINCTRL_STATE_SLEEP "sleep" + +#endif /* __LINUX_PINCTRL_PINCTRL_STATE_H */ -- cgit v1.2.3