From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- include/scsi/libsas.h | 759 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 759 insertions(+) create mode 100644 include/scsi/libsas.h (limited to 'include/scsi/libsas.h') diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h new file mode 100644 index 000000000..2dbead74a --- /dev/null +++ b/include/scsi/libsas.h @@ -0,0 +1,759 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * SAS host prototypes and structures header file + * + * Copyright (C) 2005 Adaptec, Inc. All rights reserved. + * Copyright (C) 2005 Luben Tuikov + */ + +#ifndef _LIBSAS_H_ +#define _LIBSAS_H_ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct block_device; + +enum sas_class { + SAS, + EXPANDER +}; + +enum sas_phy_role { + PHY_ROLE_NONE = 0, + PHY_ROLE_TARGET = 0x40, + PHY_ROLE_INITIATOR = 0x80, +}; + +enum sas_phy_type { + PHY_TYPE_PHYSICAL, + PHY_TYPE_VIRTUAL +}; + +/* The events are mnemonically described in sas_dump.c + * so when updating/adding events here, please also + * update the other file too. + */ +enum port_event { + PORTE_BYTES_DMAED = 0U, + PORTE_BROADCAST_RCVD, + PORTE_LINK_RESET_ERR, + PORTE_TIMER_EVENT, + PORTE_HARD_RESET, + PORT_NUM_EVENTS, +}; + +enum phy_event { + PHYE_LOSS_OF_SIGNAL = 0U, + PHYE_OOB_DONE, + PHYE_OOB_ERROR, + PHYE_SPINUP_HOLD, /* hot plug SATA, no COMWAKE sent */ + PHYE_RESUME_TIMEOUT, + PHYE_SHUTDOWN, + PHY_NUM_EVENTS, +}; + +enum discover_event { + DISCE_DISCOVER_DOMAIN = 0U, + DISCE_REVALIDATE_DOMAIN, + DISCE_SUSPEND, + DISCE_RESUME, + DISC_NUM_EVENTS, +}; + +/* ---------- Expander Devices ---------- */ + +#define to_dom_device(_obj) container_of(_obj, struct domain_device, dev_obj) +#define to_dev_attr(_attr) container_of(_attr, struct domain_dev_attribute,\ + attr) + +enum routing_attribute { + DIRECT_ROUTING, + SUBTRACTIVE_ROUTING, + TABLE_ROUTING, +}; + +enum ex_phy_state { + PHY_EMPTY, + PHY_VACANT, + PHY_NOT_PRESENT, + PHY_DEVICE_DISCOVERED +}; + +struct ex_phy { + int phy_id; + + enum ex_phy_state phy_state; + + enum sas_device_type attached_dev_type; + enum sas_linkrate linkrate; + + u8 attached_sata_host:1; + u8 attached_sata_dev:1; + u8 attached_sata_ps:1; + + enum sas_protocol attached_tproto; + enum sas_protocol attached_iproto; + + u8 attached_sas_addr[SAS_ADDR_SIZE]; + u8 attached_phy_id; + + int phy_change_count; + enum routing_attribute routing_attr; + u8 virtual:1; + + int last_da_index; + + struct sas_phy *phy; + struct sas_port *port; +}; + +struct expander_device { + struct list_head children; + + int ex_change_count; + u16 max_route_indexes; + u8 num_phys; + + u8 t2t_supp:1; + u8 configuring:1; + u8 conf_route_table:1; + + u8 enclosure_logical_id[8]; + + struct ex_phy *ex_phy; + struct sas_port *parent_port; + + struct mutex cmd_mutex; +}; + +/* ---------- SATA device ---------- */ +#define ATA_RESP_FIS_SIZE 24 + +struct sata_device { + unsigned int class; + u8 port_no; /* port number, if this is a PM (Port) */ + + struct ata_port *ap; + struct ata_host *ata_host; + struct smp_rps_resp rps_resp ____cacheline_aligned; /* report_phy_sata_resp */ + u8 fis[ATA_RESP_FIS_SIZE]; +}; + +struct ssp_device { + struct list_head eh_list_node; /* pending a user requested eh action */ + struct scsi_lun reset_lun; +}; + +enum { + SAS_DEV_GONE, + SAS_DEV_FOUND, /* device notified to lldd */ + SAS_DEV_DESTROY, + SAS_DEV_EH_PENDING, + SAS_DEV_LU_RESET, + SAS_DEV_RESET, +}; + +struct domain_device { + spinlock_t done_lock; + enum sas_device_type dev_type; + + enum sas_linkrate linkrate; + enum sas_linkrate min_linkrate; + enum sas_linkrate max_linkrate; + + int pathways; + + struct domain_device *parent; + struct list_head siblings; /* devices on the same level */ + struct asd_sas_port *port; /* shortcut to root of the tree */ + struct sas_phy *phy; + + struct list_head dev_list_node; + struct list_head disco_list_node; /* awaiting probe or destruct */ + + enum sas_protocol iproto; + enum sas_protocol tproto; + + struct sas_rphy *rphy; + + u8 sas_addr[SAS_ADDR_SIZE]; + u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE]; + + u8 frame_rcvd[32]; + + union { + struct expander_device ex_dev; + struct sata_device sata_dev; /* STP & directly attached */ + struct ssp_device ssp_dev; + }; + + void *lldd_dev; + unsigned long state; + struct kref kref; +}; + +struct sas_work { + struct list_head drain_node; + struct work_struct work; +}; + +static inline bool dev_is_expander(enum sas_device_type type) +{ + return type == SAS_EDGE_EXPANDER_DEVICE || + type == SAS_FANOUT_EXPANDER_DEVICE; +} + +static inline void INIT_SAS_WORK(struct sas_work *sw, void (*fn)(struct work_struct *)) +{ + INIT_WORK(&sw->work, fn); + INIT_LIST_HEAD(&sw->drain_node); +} + +struct sas_discovery_event { + struct sas_work work; + struct asd_sas_port *port; +}; + +static inline struct sas_discovery_event *to_sas_discovery_event(struct work_struct *work) +{ + struct sas_discovery_event *ev = container_of(work, typeof(*ev), work.work); + + return ev; +} + +struct sas_discovery { + struct sas_discovery_event disc_work[DISC_NUM_EVENTS]; + unsigned long pending; + u8 fanout_sas_addr[SAS_ADDR_SIZE]; + u8 eeds_a[SAS_ADDR_SIZE]; + u8 eeds_b[SAS_ADDR_SIZE]; + int max_level; +}; + +/* The port struct is Class:RW, driver:RO */ +struct asd_sas_port { +/* private: */ + struct sas_discovery disc; + struct domain_device *port_dev; + spinlock_t dev_list_lock; + struct list_head dev_list; + struct list_head disco_list; + struct list_head destroy_list; + struct list_head sas_port_del_list; + enum sas_linkrate linkrate; + + struct sas_work work; + int suspended; + +/* public: */ + int id; + + enum sas_class class; + u8 sas_addr[SAS_ADDR_SIZE]; + u8 attached_sas_addr[SAS_ADDR_SIZE]; + enum sas_protocol iproto; + enum sas_protocol tproto; + + enum sas_oob_mode oob_mode; + + spinlock_t phy_list_lock; + struct list_head phy_list; + int num_phys; + u32 phy_mask; + + struct sas_ha_struct *ha; + + struct sas_port *port; + + void *lldd_port; /* not touched by the sas class code */ +}; + +struct asd_sas_event { + struct sas_work work; + struct asd_sas_phy *phy; + int event; +}; + +static inline struct asd_sas_event *to_asd_sas_event(struct work_struct *work) +{ + struct asd_sas_event *ev = container_of(work, typeof(*ev), work.work); + + return ev; +} + +static inline void INIT_SAS_EVENT(struct asd_sas_event *ev, + void (*fn)(struct work_struct *), + struct asd_sas_phy *phy, int event) +{ + INIT_SAS_WORK(&ev->work, fn); + ev->phy = phy; + ev->event = event; +} + +#define SAS_PHY_SHUTDOWN_THRES 1024 + +/* The phy pretty much is controlled by the LLDD. + * The class only reads those fields. + */ +struct asd_sas_phy { +/* private: */ + atomic_t event_nr; + int in_shutdown; + int error; + int suspended; + + struct sas_phy *phy; + +/* public: */ + /* The following are class:RO, driver:R/W */ + int enabled; /* must be set */ + + int id; /* must be set */ + enum sas_class class; + enum sas_protocol iproto; + enum sas_protocol tproto; + + enum sas_phy_type type; + enum sas_phy_role role; + enum sas_oob_mode oob_mode; + enum sas_linkrate linkrate; + + u8 *sas_addr; /* must be set */ + u8 attached_sas_addr[SAS_ADDR_SIZE]; /* class:RO, driver: R/W */ + + spinlock_t frame_rcvd_lock; + u8 *frame_rcvd; /* must be set */ + int frame_rcvd_size; + + spinlock_t sas_prim_lock; + u32 sas_prim; + + struct list_head port_phy_el; /* driver:RO */ + struct asd_sas_port *port; /* Class:RW, driver: RO */ + + struct sas_ha_struct *ha; /* may be set; the class sets it anyway */ + + void *lldd_phy; /* not touched by the sas_class_code */ +}; + +struct scsi_core { + struct Scsi_Host *shost; + +}; + +enum sas_ha_state { + SAS_HA_REGISTERED, + SAS_HA_DRAINING, + SAS_HA_ATA_EH_ACTIVE, + SAS_HA_FROZEN, + SAS_HA_RESUMING, +}; + +struct sas_ha_struct { +/* private: */ + struct list_head defer_q; /* work queued while draining */ + struct mutex drain_mutex; + unsigned long state; + spinlock_t lock; + int eh_active; + wait_queue_head_t eh_wait_q; + struct list_head eh_dev_q; + + struct mutex disco_mutex; + + struct scsi_core core; + +/* public: */ + char *sas_ha_name; + struct device *dev; /* should be set */ + struct module *lldd_module; /* should be set */ + + struct workqueue_struct *event_q; + struct workqueue_struct *disco_q; + + u8 *sas_addr; /* must be set */ + u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE]; + + spinlock_t phy_port_lock; + struct asd_sas_phy **sas_phy; /* array of valid pointers, must be set */ + struct asd_sas_port **sas_port; /* array of valid pointers, must be set */ + int num_phys; /* must be set, gt 0, static */ + + int strict_wide_ports; /* both sas_addr and attached_sas_addr must match + * their siblings when forming wide ports */ + + void *lldd_ha; /* not touched by sas class code */ + + struct list_head eh_done_q; /* complete via scsi_eh_flush_done_q */ + struct list_head eh_ata_q; /* scmds to promote from sas to ata eh */ + + int event_thres; +}; + +#define SHOST_TO_SAS_HA(_shost) (*(struct sas_ha_struct **)(_shost)->hostdata) + +static inline struct domain_device * +starget_to_domain_dev(struct scsi_target *starget) { + return starget->hostdata; +} + +static inline struct domain_device * +sdev_to_domain_dev(struct scsi_device *sdev) { + return starget_to_domain_dev(sdev->sdev_target); +} + +static inline struct ata_device *sas_to_ata_dev(struct domain_device *dev) +{ + return &dev->sata_dev.ap->link.device[0]; +} + +static inline struct domain_device * +cmd_to_domain_dev(struct scsi_cmnd *cmd) +{ + return sdev_to_domain_dev(cmd->device); +} + +void sas_hash_addr(u8 *hashed, const u8 *sas_addr); + +/* Before calling a notify event, LLDD should use this function + * when the link is severed (possibly from its tasklet). + * The idea is that the Class only reads those, while the LLDD, + * can R/W these (thus avoiding a race). + */ +static inline void sas_phy_disconnected(struct asd_sas_phy *phy) +{ + phy->oob_mode = OOB_NOT_CONNECTED; + phy->linkrate = SAS_LINK_RATE_UNKNOWN; +} + +static inline unsigned int to_sas_gpio_od(int device, int bit) +{ + return 3 * device + bit; +} + +static inline void sas_put_local_phy(struct sas_phy *phy) +{ + put_device(&phy->dev); +} + +#ifdef CONFIG_SCSI_SAS_HOST_SMP +int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count); +#else +static inline int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count) +{ + return -1; +} +#endif + +/* ---------- Tasks ---------- */ +/* + service_response | SAS_TASK_COMPLETE | SAS_TASK_UNDELIVERED | + exec_status | | | + ---------------------+---------------------+-----------------------+ + SAM_... | X | | + DEV_NO_RESPONSE | X | X | + INTERRUPTED | X | | + QUEUE_FULL | | X | + DEVICE_UNKNOWN | | X | + SG_ERR | | X | + ---------------------+---------------------+-----------------------+ + */ + +enum service_response { + SAS_TASK_COMPLETE, + SAS_TASK_UNDELIVERED = -1, +}; + +enum exec_status { + /* + * Values 0..0x7f are used to return the SAM_STAT_* codes. To avoid + * 'case value not in enumerated type' compiler warnings every value + * returned through the exec_status enum needs an alias with the SAS_ + * prefix here. + */ + SAS_SAM_STAT_GOOD = SAM_STAT_GOOD, + SAS_SAM_STAT_BUSY = SAM_STAT_BUSY, + SAS_SAM_STAT_TASK_ABORTED = SAM_STAT_TASK_ABORTED, + SAS_SAM_STAT_CHECK_CONDITION = SAM_STAT_CHECK_CONDITION, + + SAS_DEV_NO_RESPONSE = 0x80, + SAS_DATA_UNDERRUN, + SAS_DATA_OVERRUN, + SAS_INTERRUPTED, + SAS_QUEUE_FULL, + SAS_DEVICE_UNKNOWN, + SAS_OPEN_REJECT, + SAS_OPEN_TO, + SAS_PROTO_RESPONSE, + SAS_PHY_DOWN, + SAS_NAK_R_ERR, + SAS_PENDING, + SAS_ABORTED_TASK, +}; + +/* When a task finishes with a response, the LLDD examines the + * response: + * - For an ATA task task_status_struct::stat is set to + * SAS_PROTO_RESPONSE, and the task_status_struct::buf is set to the + * contents of struct ata_task_resp. + * - For SSP tasks, if no data is present or status/TMF response + * is valid, task_status_struct::stat is set. If data is present + * (SENSE data), the LLDD copies up to SAS_STATUS_BUF_SIZE, sets + * task_status_struct::buf_valid_size, and task_status_struct::stat is + * set to SAM_CHECK_COND. + * + * "buf" has format SCSI Sense for SSP task, or struct ata_task_resp + * for ATA task. + * + * "frame_len" is the total frame length, which could be more or less + * than actually copied. + * + * Tasks ending with response, always set the residual field. + */ +struct ata_task_resp { + u16 frame_len; + u8 ending_fis[ATA_RESP_FIS_SIZE]; /* dev to host or data-in */ +}; + +#define SAS_STATUS_BUF_SIZE 96 + +struct task_status_struct { + enum service_response resp; + enum exec_status stat; + int buf_valid_size; + + u8 buf[SAS_STATUS_BUF_SIZE]; + + u32 residual; + enum sas_open_rej_reason open_rej_reason; +}; + +/* ATA and ATAPI task queuable to a SAS LLDD. + */ +struct sas_ata_task { + struct host_to_dev_fis fis; + u8 atapi_packet[16]; /* 0 if not ATAPI task */ + + u8 retry_count; /* hardware retry, should be > 0 */ + + u8 dma_xfer:1; /* PIO:0 or DMA:1 */ + u8 use_ncq:1; + u8 set_affil_pol:1; + u8 stp_affil_pol:1; + + u8 device_control_reg_update:1; + + bool force_phy; + int force_phy_id; +}; + +/* LLDDs rely on these values */ +enum sas_internal_abort { + SAS_INTERNAL_ABORT_SINGLE = 0, + SAS_INTERNAL_ABORT_DEV = 1, +}; + +struct sas_internal_abort_task { + enum sas_internal_abort type; + unsigned int qid; + u16 tag; +}; + +struct sas_smp_task { + struct scatterlist smp_req; + struct scatterlist smp_resp; +}; + +enum task_attribute { + TASK_ATTR_SIMPLE = 0, + TASK_ATTR_HOQ = 1, + TASK_ATTR_ORDERED= 2, + TASK_ATTR_ACA = 4, +}; + +struct sas_ssp_task { + u8 retry_count; /* hardware retry, should be > 0 */ + + u8 LUN[8]; + u8 enable_first_burst:1; + enum task_attribute task_attr; + u8 task_prio; + struct scsi_cmnd *cmd; +}; + +struct sas_tmf_task { + u8 tmf; + u16 tag_of_task_to_be_managed; +}; + +struct sas_task { + struct domain_device *dev; + + spinlock_t task_state_lock; + unsigned task_state_flags; + + enum sas_protocol task_proto; + + union { + struct sas_ata_task ata_task; + struct sas_smp_task smp_task; + struct sas_ssp_task ssp_task; + struct sas_internal_abort_task abort_task; + }; + + struct scatterlist *scatter; + int num_scatter; + u32 total_xfer_len; + u8 data_dir:2; /* Use PCI_DMA_... */ + + struct task_status_struct task_status; + void (*task_done)(struct sas_task *); + + void *lldd_task; /* for use by LLDDs */ + void *uldd_task; + struct sas_task_slow *slow_task; + struct sas_tmf_task *tmf; +}; + +struct sas_task_slow { + /* standard/extra infrastructure for slow path commands (SMP and + * internal lldd commands + */ + struct timer_list timer; + struct completion completion; + struct sas_task *task; +}; + +#define SAS_TASK_STATE_PENDING 1 +#define SAS_TASK_STATE_DONE 2 +#define SAS_TASK_STATE_ABORTED 4 +#define SAS_TASK_NEED_DEV_RESET 8 + +extern struct sas_task *sas_alloc_task(gfp_t flags); +extern struct sas_task *sas_alloc_slow_task(gfp_t flags); +extern void sas_free_task(struct sas_task *task); + +static inline bool sas_is_internal_abort(struct sas_task *task) +{ + return task->task_proto == SAS_PROTOCOL_INTERNAL_ABORT; +} + +struct sas_domain_function_template { + /* The class calls these to notify the LLDD of an event. */ + void (*lldd_port_formed)(struct asd_sas_phy *); + void (*lldd_port_deformed)(struct asd_sas_phy *); + + /* The class calls these when a device is found or gone. */ + int (*lldd_dev_found)(struct domain_device *); + void (*lldd_dev_gone)(struct domain_device *); + + int (*lldd_execute_task)(struct sas_task *, gfp_t gfp_flags); + + /* Task Management Functions. Must be called from process context. */ + int (*lldd_abort_task)(struct sas_task *); + int (*lldd_abort_task_set)(struct domain_device *, u8 *lun); + int (*lldd_clear_task_set)(struct domain_device *, u8 *lun); + int (*lldd_I_T_nexus_reset)(struct domain_device *); + int (*lldd_ata_check_ready)(struct domain_device *); + void (*lldd_ata_set_dmamode)(struct domain_device *); + int (*lldd_lu_reset)(struct domain_device *, u8 *lun); + int (*lldd_query_task)(struct sas_task *); + + /* Special TMF callbacks */ + void (*lldd_tmf_exec_complete)(struct domain_device *dev); + void (*lldd_tmf_aborted)(struct sas_task *task); + bool (*lldd_abort_timeout)(struct sas_task *task, void *data); + + /* Port and Adapter management */ + int (*lldd_clear_nexus_port)(struct asd_sas_port *); + int (*lldd_clear_nexus_ha)(struct sas_ha_struct *); + + /* Phy management */ + int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func, void *); + + /* GPIO support */ + int (*lldd_write_gpio)(struct sas_ha_struct *, u8 reg_type, + u8 reg_index, u8 reg_count, u8 *write_data); +}; + +extern int sas_register_ha(struct sas_ha_struct *); +extern int sas_unregister_ha(struct sas_ha_struct *); +extern void sas_prep_resume_ha(struct sas_ha_struct *sas_ha); +extern void sas_resume_ha(struct sas_ha_struct *sas_ha); +extern void sas_resume_ha_no_sync(struct sas_ha_struct *sas_ha); +extern void sas_suspend_ha(struct sas_ha_struct *sas_ha); + +int sas_set_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates); +int sas_phy_reset(struct sas_phy *phy, int hard_reset); +int sas_phy_enable(struct sas_phy *phy, int enable); +extern int sas_queuecommand(struct Scsi_Host *, struct scsi_cmnd *); +extern int sas_target_alloc(struct scsi_target *); +extern int sas_slave_configure(struct scsi_device *); +extern int sas_change_queue_depth(struct scsi_device *, int new_depth); +extern int sas_bios_param(struct scsi_device *, struct block_device *, + sector_t capacity, int *hsc); +int sas_execute_internal_abort_single(struct domain_device *device, + u16 tag, unsigned int qid, + void *data); +int sas_execute_internal_abort_dev(struct domain_device *device, + unsigned int qid, void *data); +extern struct scsi_transport_template * +sas_domain_attach_transport(struct sas_domain_function_template *); +extern struct device_attribute dev_attr_phy_event_threshold; + +int sas_discover_root_expander(struct domain_device *); + +void sas_init_ex_attr(void); + +int sas_ex_revalidate_domain(struct domain_device *); + +void sas_unregister_domain_devices(struct asd_sas_port *port, int gone); +void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *); +void sas_discover_event(struct asd_sas_port *, enum discover_event ev); + +int sas_discover_sata(struct domain_device *); +int sas_discover_end_dev(struct domain_device *); + +void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *); + +void sas_init_dev(struct domain_device *); + +void sas_task_abort(struct sas_task *); +int sas_eh_abort_handler(struct scsi_cmnd *cmd); +int sas_eh_device_reset_handler(struct scsi_cmnd *cmd); +int sas_eh_target_reset_handler(struct scsi_cmnd *cmd); + +extern void sas_target_destroy(struct scsi_target *); +extern int sas_slave_alloc(struct scsi_device *); +extern int sas_ioctl(struct scsi_device *sdev, unsigned int cmd, + void __user *arg); +extern int sas_drain_work(struct sas_ha_struct *ha); + +extern void sas_ssp_task_response(struct device *dev, struct sas_task *task, + struct ssp_response_iu *iu); +struct sas_phy *sas_get_local_phy(struct domain_device *dev); + +int sas_request_addr(struct Scsi_Host *shost, u8 *addr); + +int sas_abort_task_set(struct domain_device *dev, u8 *lun); +int sas_clear_task_set(struct domain_device *dev, u8 *lun); +int sas_lu_reset(struct domain_device *dev, u8 *lun); +int sas_query_task(struct sas_task *task, u16 tag); +int sas_abort_task(struct sas_task *task, u16 tag); + +void sas_notify_port_event(struct asd_sas_phy *phy, enum port_event event, + gfp_t gfp_flags); +void sas_notify_phy_event(struct asd_sas_phy *phy, enum phy_event event, + gfp_t gfp_flags); + +#endif /* _SASLIB_H_ */ -- cgit v1.2.3