From 2c3c1048746a4622d8c89a29670120dc8fab93c4 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:49:45 +0200 Subject: Adding upstream version 6.1.76. Signed-off-by: Daniel Baumann --- tools/testing/selftests/gpio/gpio-mockup.sh | 403 ++++++++++++++++++++++++++++ 1 file changed, 403 insertions(+) create mode 100755 tools/testing/selftests/gpio/gpio-mockup.sh (limited to 'tools/testing/selftests/gpio/gpio-mockup.sh') diff --git a/tools/testing/selftests/gpio/gpio-mockup.sh b/tools/testing/selftests/gpio/gpio-mockup.sh new file mode 100755 index 000000000..0d6c5f7f9 --- /dev/null +++ b/tools/testing/selftests/gpio/gpio-mockup.sh @@ -0,0 +1,403 @@ +#!/bin/bash -efu +# SPDX-License-Identifier: GPL-2.0 + +#exit status +#0: success +#1: fail +#4: skip test - including run as non-root user + +BASE=${0%/*} +DEBUGFS= +GPIO_DEBUGFS= +dev_type="cdev" +module="gpio-mockup" +verbose= +full_test= +random= +uapi_opt= +active_opt= +bias_opt= +line_set_pid= + +# Kselftest return codes +ksft_fail=1 +ksft_skip=4 + +usage() +{ + echo "Usage:" + echo "$0 [-frv] [-t type]" + echo "-f: full test (minimal set run by default)" + echo "-r: test random lines as well as fence posts" + echo "-t: interface type:" + echo " cdev (character device ABI) - default" + echo " cdev_v1 (deprecated character device ABI)" + echo " sysfs (deprecated SYSFS ABI)" + echo "-v: verbose progress reporting" + exit $ksft_fail +} + +skip() +{ + echo "$*" >&2 + echo "GPIO $module test SKIP" + exit $ksft_skip +} + +prerequisite() +{ + [ $(id -u) -eq 0 ] || skip "must be run as root" + + DEBUGFS=$(grep -w debugfs /proc/mounts | cut -f2 -d' ') + [ -d "$DEBUGFS" ] || skip "debugfs is not mounted" + + GPIO_DEBUGFS=$DEBUGFS/$module +} + +remove_module() +{ + modprobe -r -q $module +} + +cleanup() +{ + set +e + release_line + remove_module + jobs -p | xargs -r kill > /dev/null 2>&1 +} + +fail() +{ + echo "test failed: $*" >&2 + echo "GPIO $module test FAIL" + exit $ksft_fail +} + +try_insert_module() +{ + modprobe -q $module "$1" || fail "insert $module failed with error $?" +} + +log() +{ + [ -z "$verbose" ] || echo "$*" +} + +# The following line helpers, release_Line, get_line and set_line, all +# make use of the global $chip and $offset variables. +# +# This implementation drives the GPIO character device (cdev) uAPI. +# Other implementations may override these to test different uAPIs. + +# Release any resources related to the line +release_line() +{ + [ "$line_set_pid" ] && kill $line_set_pid && wait $line_set_pid || true + line_set_pid= +} + +# Read the current value of the line +get_line() +{ + release_line + + local cdev_opts=${uapi_opt}${active_opt} + $BASE/gpio-mockup-cdev $cdev_opts /dev/$chip $offset + echo $? +} + +# Set the state of the line +# +# Changes to line configuration are provided as parameters. +# The line is assumed to be an output if the line value 0 or 1 is +# specified, else an input. +set_line() +{ + local val= + + release_line + + # parse config options... + for option in $*; do + case $option in + active-low) + active_opt="-l " + ;; + active-high) + active_opt= + ;; + bias-none) + bias_opt= + ;; + pull-down) + bias_opt="-bpull-down " + ;; + pull-up) + bias_opt="-bpull-up " + ;; + 0) + val=0 + ;; + 1) + val=1 + ;; + esac + done + + local cdev_opts=${uapi_opt}${active_opt} + if [ "$val" ]; then + $BASE/gpio-mockup-cdev $cdev_opts -s$val /dev/$chip $offset & + # failure to set is detected by reading mockup and toggling values + line_set_pid=$! + # allow for gpio-mockup-cdev to launch and request line + # (there is limited value in checking if line has been requested) + sleep 0.01 + elif [ "$bias_opt" ]; then + cdev_opts=${cdev_opts}${bias_opt} + $BASE/gpio-mockup-cdev $cdev_opts /dev/$chip $offset || true + fi +} + +assert_line() +{ + local val + # don't need any retry here as set_mock allows for propagation + val=$(get_line) + [ "$val" = "$1" ] || fail "line value is ${val:-empty} when $1 was expected" +} + +# The following mockup helpers all make use of the $mock_line +assert_mock() +{ + local backoff_wait=10 + local retry=0 + local val + # retry allows for set propagation from uAPI to mockup + while true; do + val=$(< $mock_line) + [ "$val" = "$1" ] && break + retry=$((retry + 1)) + [ $retry -lt 5 ] || fail "mockup $mock_line value ${val:-empty} when $1 expected" + sleep $(printf "%0.2f" $((backoff_wait))e-3) + backoff_wait=$((backoff_wait * 2)) + done +} + +set_mock() +{ + echo "$1" > $mock_line + # allow for set propagation - so we won't be in a race with set_line + assert_mock "$1" +} + +# test the functionality of a line +# +# The line is set from the mockup side and is read from the userspace side +# (input), and is set from the userspace side and is read from the mockup side +# (output). +# +# Setting the mockup pull using the userspace interface bias settings is +# tested where supported by the userspace interface (cdev). +test_line() +{ + chip=$1 + offset=$2 + log "test_line $chip $offset" + mock_line=$GPIO_DEBUGFS/$chip/$offset + [ -e "$mock_line" ] || fail "missing line $chip:$offset" + + # test input active-high + set_mock 1 + set_line input active-high + assert_line 1 + set_mock 0 + assert_line 0 + set_mock 1 + assert_line 1 + + if [ "$full_test" ]; then + if [ "$dev_type" != "sysfs" ]; then + # test pulls + set_mock 0 + set_line input pull-up + assert_line 1 + set_mock 0 + assert_line 0 + + set_mock 1 + set_line input pull-down + assert_line 0 + set_mock 1 + assert_line 1 + + set_line bias-none + fi + + # test input active-low + set_mock 0 + set_line active-low + assert_line 1 + set_mock 1 + assert_line 0 + set_mock 0 + assert_line 1 + + # test output active-high + set_mock 1 + set_line active-high 0 + assert_mock 0 + set_line 1 + assert_mock 1 + set_line 0 + assert_mock 0 + fi + + # test output active-low + set_mock 0 + set_line active-low 0 + assert_mock 1 + set_line 1 + assert_mock 0 + set_line 0 + assert_mock 1 + + release_line +} + +test_no_line() +{ + log test_no_line "$*" + [ ! -e "$GPIO_DEBUGFS/$1/$2" ] || fail "unexpected line $1:$2" +} + +# Load the module and check that the expected number of gpiochips, with the +# expected number of lines, are created and are functional. +# +# $1 is the gpio_mockup_ranges parameter for the module +# The remaining parameters are the number of lines, n, expected for each of +# the gpiochips expected to be created. +# +# For each gpiochip the fence post lines, 0 and n-1, are tested, and the +# line on the far side of the fence post, n, is tested to not exist. +# +# If the $random flag is set then a random line in the middle of the +# gpiochip is tested as well. +insmod_test() +{ + local ranges= + local gc= + local width= + + [ "${1:-}" ] || fail "missing ranges" + ranges=$1 ; shift + try_insert_module "gpio_mockup_ranges=$ranges" + log "GPIO $module test with ranges: <$ranges>:" + # e.g. /sys/kernel/debug/gpio-mockup/gpiochip1 + gpiochip=$(find "$DEBUGFS/$module/" -name gpiochip* -type d | sort) + for chip in $gpiochip; do + gc=${chip##*/} + [ "${1:-}" ] || fail "unexpected chip - $gc" + width=$1 ; shift + test_line $gc 0 + if [ "$random" -a $width -gt 2 ]; then + test_line $gc $((RANDOM % ($width - 2) + 1)) + fi + test_line $gc $(($width - 1)) + test_no_line $gc $width + done + [ "${1:-}" ] && fail "missing expected chip of width $1" + remove_module || fail "failed to remove module with error $?" +} + +while getopts ":frvt:" opt; do + case $opt in + f) + full_test=true + ;; + r) + random=true + ;; + t) + dev_type=$OPTARG + ;; + v) + verbose=true + ;; + *) + usage + ;; + esac +done +shift $((OPTIND - 1)) + +[ "${1:-}" ] && fail "unknown argument '$1'" + +prerequisite + +trap 'exit $ksft_fail' SIGTERM SIGINT +trap cleanup EXIT + +case "$dev_type" in +sysfs) + source $BASE/gpio-mockup-sysfs.sh + echo "WARNING: gpio sysfs ABI is deprecated." + ;; +cdev_v1) + echo "WARNING: gpio cdev ABI v1 is deprecated." + uapi_opt="-u1 " + ;; +cdev) + ;; +*) + fail "unknown interface type: $dev_type" + ;; +esac + +remove_module || fail "can't remove existing $module module" + +# manual gpio allocation tests fail if a physical chip already exists +[ "$full_test" -a -e "/dev/gpiochip0" ] && skip "full tests conflict with gpiochip0" + +echo "1. Module load tests" +echo "1.1. dynamic allocation of gpio" +insmod_test "-1,32" 32 +insmod_test "-1,23,-1,32" 23 32 +insmod_test "-1,23,-1,26,-1,32" 23 26 32 +if [ "$full_test" ]; then + echo "1.2. manual allocation of gpio" + insmod_test "0,32" 32 + insmod_test "0,32,32,60" 32 28 + insmod_test "0,32,40,64,64,96" 32 24 32 + echo "1.3. dynamic and manual allocation of gpio" + insmod_test "-1,32,32,62" 32 30 + insmod_test "-1,22,-1,23,0,24,32,64" 22 23 24 32 + insmod_test "-1,32,32,60,-1,29" 32 28 29 + insmod_test "-1,32,40,64,-1,5" 32 24 5 + insmod_test "0,32,32,44,-1,22,-1,31" 32 12 22 31 +fi +echo "2. Module load error tests" +echo "2.1 gpio overflow" +# Currently: The max number of gpio(1024) is defined in arm architecture. +insmod_test "-1,1024" +if [ "$full_test" ]; then + echo "2.2 no lines defined" + insmod_test "0,0" + echo "2.3 ignore range overlap" + insmod_test "0,32,0,1" 32 + insmod_test "0,32,1,5" 32 + insmod_test "0,32,30,35" 32 + insmod_test "0,32,31,32" 32 + insmod_test "10,32,30,35" 22 + insmod_test "10,32,9,14" 22 + insmod_test "0,32,20,21,40,56" 32 16 + insmod_test "0,32,32,64,32,40" 32 32 + insmod_test "0,32,32,64,36,37" 32 32 + insmod_test "0,32,35,64,34,36" 32 29 + insmod_test "0,30,35,64,35,45" 30 29 + insmod_test "0,32,40,56,30,33" 32 16 + insmod_test "0,32,40,56,30,41" 32 16 + insmod_test "0,32,40,56,39,45" 32 16 +fi + +echo "GPIO $module test PASS" -- cgit v1.2.3