diff options
Diffstat (limited to 'makefile.in')
| -rw-r--r-- | makefile.in | 505 |
1 files changed, 505 insertions, 0 deletions
diff --git a/makefile.in b/makefile.in new file mode 100644 index 0000000..ede88c0 --- /dev/null +++ b/makefile.in @@ -0,0 +1,505 @@ +# $LynxId: makefile.in,v 1.193 2023/01/02 23:47:08 tom Exp $ +##makefile for lynx + +SHELL = @CONFIG_SHELL@ +CDPATH = . + +.SUFFIXES: +@SET_MAKE@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ +top_srcdir = @top_srcdir@ +srcdir = @srcdir@ +builddir = . +VPATH = $(srcdir) + +CC = @CC@ +CFLAGS = @CFLAGS@ @EXTRA_CFLAGS@ +DEFS = @DEFS@ +CPPFLAGS = @CPPFLAGS@ +LINT = @LINT@ +ETAGS = @ETAGS@ +EGREP = @EGREP@ +FGREP = @FGREP@ + +BUILD_CC = @BUILD_CC@ +BUILD_CPP = @BUILD_CPP@ +BUILD_CFLAGS = @BUILD_CFLAGS@ +BUILD_CPPFLAGS = @BUILD_CPPFLAGS@ @DEFS@ +BUILD_EXEEXT = @BUILD_EXEEXT@ +BUILD_LDFLAGS = @BUILD_LDFLAGS@ +BUILD_LIBS = @BUILD_LIBS@ + +x = @EXEEXT@ +o = .@OBJEXT@ + +LDFLAGS = @EXTRA_LDFLAGS@ @LDFLAGS@ +LIBS = @LIBS@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ + +LN_S = @LN_S@ + +TAR = @TAR@ +TAR_UP = $(TAR) @TAR_UP_OPTIONS@ @TAR_PIPE_OPTIONS@ +TAR_DOWN = $(TAR) @TAR_DOWN_OPTIONS@ @TAR_PIPE_OPTIONS@ + +# $Format: "LYNX_VERSION = $ProjectVersion$"$ +LYNX_VERSION = 2.9.0dev.12 + +## This is the version which we are developing (or, upon release, make this +## the same). Use no dots in the name, since it must work on VMS and MS-DOS. +VERSION = 2-8-9 + +##this is the name of the directory the lynx source code is in. +##(e.g., lynx2-8-9, not the full path) +lynxdir= lynx$(VERSION) +lynxname= lynx$(VERSION) + +## The 'DESTDIR' variable allows you to install the program into a different +## location, e.g., for packaging, without affecting the compiled-in pathnames. +DESTDIR= @DESTDIR@ + +## Where you want lynx installed +bindir= @bindir@ +BINDIR= $(DESTDIR)$(bindir) + +## Where you want the lynx man file installed +mandir= @mandir@/man1 +MANDIR= $(DESTDIR)$(mandir) + +## Where you want the lynx.cfg file installed +sysconfdir= @sysconfdir@ +SYSCONFDIR= $(DESTDIR)$(sysconfdir) + +## Where you want the doc-files installed +datarootdir= @datarootdir@ +docdir = @datadir@/lynx_doc +DOCDIR = $(DESTDIR)$(docdir) + +## Where you want the help-files installed +helpdir = @datadir@/lynx_help +HELPDIR = $(DESTDIR)$(helpdir) + +##set the relative location of the WWW library Implementation directory, +##from this directory +##do not set this to be an absolute path!!! +WWW_DIR = $(builddir)/WWW/Library/Implementation + +##set the relative location of the message-file directory +##do not set this to be an absolute path!!! +PO_DIR = $(builddir)/po +PO_SRCDIR = $(srcdir)/po + +##set the relative location of the main source-directory +##do not set this to be an absolute path!!! +SRC_DIR = $(builddir)/src + +##set the relative location of the character-translation data directory +##do not set this to be an absolute path!!! +CHR_DIR = $(SRC_DIR)/chrtrans + +## Path to gzip that will compress the help files. +## It will be used when --enable-gzip-help is set by configure. +## Leave *both* empty if you don't want to gzip help files. +COMPRESS_PROG=@COMPRESS_PROG@ +COMPRESS_EXT=@COMPRESS_EXT@ + +# Path of scripts directory +scripts_dir=$(srcdir)/scripts + +MAKE_RECUR = $(MAKE) @cf_cv_makeflags@ DESTDIR="$(DESTDIR)" CC="$(CC)" + +@LYNXCFG_MAKE@CFG2HTML = alphatoc.html body.html cattoc.html + +# !!!!!!!!!!! SUN resolv LIBRARY !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! +# To include resolv in the LIBS="" list for SUN 3, 4 or Solaris OS, +# point RESOLVLIB to that library. You need this if you get the message +# "Alert!: Unable to connect to remote host" whenever you try to +# access a host other than localhost and have made Lynx without it. +# See the PROBLEMS file for more information. +#RESOLVLIB= -lresolv + +# !!!!!!!!!!!!! DIRECT WAIS ACCESS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! +# If you are adding direct wais access you must fill in the +# location of wais.a, client.a and the standard math library, libm.a. +# You can pick up the most current freeWAIS sources from +# ftp://ftp.cnidr.org/pub/NIDR.tools/freewais +# If you are using freeWAIS-0.202 or older, include -DDECLARE_WAIS_LOGFILES +# in your SITE_DEFS. +# Please put an ABSOLUTE address here if you want it to work! +#WAISLIB= ../../freeWAIS-0.202/bin/client.a ../../freeWAIS-0.202/bin/wais.a /usr/lib/libm.a + +# !!!!!!!!!!!!! SLANG Support (For color version of Lynx). !!!!!!!!!!!!!!!! +# The slang library is an alternative to curses, developed by John E. Davis +# (davis@space.mit.edu). Version 0.99-27 or higher is available from +# ftp://space.mit.edu/pub/davis +# It provides color support for Lynx. + +# !!!!!!!!!!!!! NCURSES Support (For color version of Lynx). !!!!!!!!!!!!!! +# If you need ncurses, the latest version can always be found +# in https://invisible-island.net/ncurses/ +# or https://ftp.gnu.org/pub/gnu/ + +# Also be sure to check out the compilation symbols in userdefs.h +# before building Lynx! + +# If you apply patches which require linking to site-specific libraries, set +# SITE_LIBS to those libraries. +SITE_LIBS= # Your libraries here + +# Set SITE_LYDEFS to one or more of the defines for the WWW Library: +SITE_LYDEFS = # Your defines here + +# Set SITE_DEFS to one or more of the defines for lynx below: +SITE_DEFS = # Your defines here + +# defines for which there are no configure options: +# -DIGNORE_CTRL_C Define if Control-C shouldn't exit lynx. +# -DNO_RULES Disables CERN-style access rules (see lynx.cfg). +# +# if you are linking to freeWAIS-0.202 or older, you should define this +# in SITE_DEFS +# +# -DDECLARE_WAIS_LOGFILES +# +# if you have an SVR4 system with the "type any key" problem, try defining +# this in LYFLAGS (SITE_LYDEFS) and SITE_DEFS +# +# -DSVR4_BSDSELECT +# +# Many other defines have configure options (see INSTALLATION, Section II-1c.): +# +# for installation of local execution links, please see the file userdefs.h + +WWW_CFLAGS = \ + LY_CFLAGS="$(CFLAGS)" \ + CPPFLAGS="$(CPPFLAGS)" \ + LYFLAGS="$(SITE_LYDEFS)" + +CHR_CFLAGS = \ + SITE_DEFS="$(SITE_DEFS)" \ + BUILD_CFLAGS="$(BUILD_CFLAGS)" \ + BUILD_CPPFLAGS="$(BUILD_CPPFLAGS)" \ + BUILD_LDFLAGS="$(BUILD_LDFLAGS)" \ + BUILD_LIBS="$(BUILD_LIBS)" \ + BUILD_CC="$(BUILD_CC)" + +SRC_CFLAGS = \ + CFLAGS="$(CFLAGS)" \ + CPPFLAGS="$(CPPFLAGS)" \ + LDFLAGS="$(LDFLAGS)" \ + LIBS="$(LIBS) $(RESOLVLIB) $(WAISLIB) $(SITE_LIBS)" \ + SITE_DEFS="$(SITE_DEFS)" \ + WWWINC=$(WWW_DIR) \ + WWWLIB="../$(WWW_DIR)/libwww.a" + +actual_PROG = `echo lynx|sed '@program_transform_name@'` +binary_PROG = $(actual_PROG)$x + +all lynx$x: cfg_defs.h LYHelp.h +@MSG_DIR_MAKE@ $(SHELL) $(scripts_dir)/fixtext.sh $(srcdir)/LYMessages_en.h >LYMessages.c +@MSG_DIR_MAKE@ ( cd $(PO_DIR) && $(MAKE_RECUR) ) + ( cd $(WWW_DIR) && $(MAKE_RECUR) $(WWW_CFLAGS) ) + ( cd $(CHR_DIR) && $(MAKE_RECUR) all $(CHR_CFLAGS) ) + ( cd $(SRC_DIR) && $(MAKE_RECUR) all $(SRC_CFLAGS) ) + +lint: + ( cd $(WWW_DIR) && $(MAKE_RECUR) LINT="$(LINT)" $(WWW_CFLAGS) $@ ) + ( cd $(SRC_DIR) && $(MAKE_RECUR) LINT="$(LINT)" $(SRC_CFLAGS) $@ ) + ( cd $(CHR_DIR) && $(MAKE_RECUR) LINT="$(LINT)" $@ ) + +tags: + ( cd $(WWW_DIR) && $(MAKE_RECUR) $(WWW_CFLAGS) $@ ) + ( cd $(SRC_DIR) && $(MAKE_RECUR) $(SRC_CFLAGS) $@ ) + ( cd $(CHR_DIR) && $(MAKE_RECUR) $@ ) + +etags: + $(ETAGS) *.[ch] */*.[ch] */*/*.[ch] */*/*/*.[ch] + +check: + @echo "There is no batch test for this program" + +help: + @echo + @echo "Please run make with one of the following arguments" + @echo "all -- to make the executable, put it in this directory" + @echo "clean -- removes all '$o' and 'core' files" + @echo "distclean -- removes all generated files" + @echo "depend -- use makedepend to generate header-dependencies" + @echo + +##Miscellaneous actions +clean: + rm -f WWW/Library/*/*.[aoib] + rm -f WWW/Library/*/.created + ( cd $(WWW_DIR) && $(MAKE_RECUR) $@ ) + ( cd $(SRC_DIR) && $(MAKE_RECUR) $@ ) +@MSG_DIR_MAKE@ rm -f LYMessages.c +@MSG_DIR_MAKE@ ( cd $(PO_DIR) && $(MAKE_RECUR) $@ ) + rm -f *.b $(SRC_DIR)/lynx$x *.leaks cfg_defs.h LYHelp.h lint.* +@LYNXCFG_MAKE@ -rm -f $(CFG2HTML) + rm -f help_files.sed + rm -f core *.core + +depend: cfg_defs.h LYHelp.h + ( cd $(WWW_DIR) && $(MAKE_RECUR) $@ ) + ( cd $(SRC_DIR) && $(MAKE_RECUR) $@ ) + +distclean: clean + -rm -f WWW/Library/*/*~ + -rm -f WWW/Library/*/*.bak + -rm -rf $(SRC_DIR)/obsolete + -( cd $(WWW_DIR) && $(MAKE_RECUR) $@ ) + -( cd $(SRC_DIR) && $(MAKE_RECUR) $@ ) + -( cd $(CHR_DIR) && $(MAKE_RECUR) $@ ) +@MSG_DIR_MAKE@ -( cd $(PO_DIR) && $(MAKE_RECUR) $@ ) +@MSG_DIR_MAKE@ -rmdir $(PO_DIR) + -rm -f *~ *.bak *.sav tags TAGS + -rm -f $(WWW_DIR)/makefile $(SRC_DIR)/makefile $(CHR_DIR)/makefile +@SRCDIR_CLEAN@ -rmdir $(WWW_DIR) && rmdir WWW/Library && rmdir WWW +@SRCDIR_CLEAN@ -rmdir $(CHR_DIR) && rmdir $(SRC_DIR) + -rm -f makefile lynx_cfg.h config.status config.log config.cache + -rm -f lynx$x + +maintainer-clean: distclean + -find . -type f -name '*.rej' -exec rm -f {} \; + -find . -type f -name '*.orig' -exec rm -f {} \; + -rm -rf WWW/Library/*/obsolete + -rm -f Lynx.prj .*_aux + +# Directory containing reference source for patch generation, +# either absolute or relative to $(top_srcdir)/.. +REFDIR=orig/$(lynxdir) + +lynx.patch: $(top_srcdir) $(top_srcdir)/CHANGES + -( cd $(top_srcdir)/.. && cd $(REFDIR) && { rm -f \ + config.log \ + config.status \ + lynx_cfg.h \ + ; \ + for I in . $(SRC_DIR) $(WWW_DIR); do ( set +e; \ + ( set -x; cd $$I && rm -f *.orig *.rej makefile ); : ); \ + done; } ) + ( cd $(top_srcdir)/..; echo "%%% Created `date` by target $@. %%%"; \ + if diff -bru /dev/null /dev/null; \ + then diff -bru $(REFDIR) $(lynxdir); \ + else diff -brc $(REFDIR) $(lynxdir); fi ) \ + | grep -v '^Common' \ + | grep -v '^Binary files ' \ + | grep -v '^Only ' | tee $@ | egrep '^\-\-\- .*$(lynxdir)' + +install: install-bin install-man install-cfg @INSTALL_LSS@ + @echo + @echo "Use $(MAKE) install-help to install the help-files" + @echo "Use $(MAKE) install-doc to install extra documentation files" + @echo + +install-full: install install-help install-doc + @echo "Full installation complete." + +install-bin: $(BINDIR) lynx$x +@MSG_DIR_MAKE@ ( cd $(PO_DIR) && $(MAKE_RECUR) install ) + @ECHO_CC@$(SHELL) -c "P=$(binary_PROG); \ + if test -f $(BINDIR)/$$P ; then \ + mv -f $(BINDIR)/$$P $(BINDIR)/$$P.old; fi"; \ + $(INSTALL_PROGRAM) lynx$x $(BINDIR)/$(binary_PROG) + +install-man : $(MANDIR) + $(INSTALL_DATA) $(srcdir)/lynx.man $(MANDIR)/$(actual_PROG).1 + +install-doc : $(DOCDIR) $(HELPDIR) + @echo "Copying sample files";\ + $(SHELL) -c 'set -x; \ + ( umask 022; \ + cd $(srcdir) && \ + $(TAR_UP) C[HO]* PROBLEMS README docs samples test ) | \ + ( umask 022; \ + cd $(DOCDIR) && \ + chmod -R u+w . && $(TAR_DOWN) )';\ + $(SHELL) -c 'if test "$(COMPRESS_PROG)" != "" ; then \ + (cd $(DOCDIR) && $(COMPRESS_PROG) -f docs/CHANGES*.[0-9] docs/*.announce ) \ + fi';\ + $(SHELL) -c 'set -x; \ + for name in COPYING COPYHEADER; do \ + cd $(HELPDIR) && rm -f $$name ;\ + r= ;\ + test "$(LN_S)" = "ln -s" || r=`echo $(helpdir)|sed -e "s%[^/]\+%..%g" -e "s%^.%%"`; \ + cd $(HELPDIR) && ( $(LN_S) $$r$(docdir)/$$name . || cp $(DOCDIR)/$$name . );\ + done';\ + $(SHELL) -c 'set -x; \ + case `id|sed -e "s/(.*//"` in \ + uid=0) \ + chown -R root $(DOCDIR);; \ + esac' + +# HPUX 'sed' does not seem to like '=' as pattern delimiter. +# We cannot use '%' because it may appear in a URL. +# Andrew filesystem uses '@'. +# So we limit sed delimiters to '!' and '%', depending on the expected text. +FIX_SED = tr '=' '"' + +LYNX_URL='@HOMEPAGE_URL@release/breakout' +LYNXDOCS_URL='$(LYNX_URL)/docs/' +LYNXHELP_URL='$(LYNX_URL)/lynx_help/' + +@LYNXCFG_NO_MAKE@htmlized_cfg: +@LYNXCFG_MAKE@@MAKE_NO_PHONY@htmlized_cfg: $(CFG2HTML) +@LYNXCFG_MAKE@@MAKE_NO_PHONY@$(CFG2HTML): +@LYNXCFG_MAKE@@MAKE_PHONY@.PHONY: htmlized_cfg +@LYNXCFG_MAKE@@MAKE_PHONY@$(CFG2HTML): htmlized_cfg +@LYNXCFG_MAKE@@MAKE_PHONY@htmlized_cfg: +@LYNXCFG_MAKE@ @echo "Making htmlized lynx.cfg" +@LYNXCFG_MAKE@ ( cd $(SRC_DIR) && $(MAKE_RECUR) LYReadCFG.i ) +@LYNXCFG_MAKE@ @-rm -f $(CFG2HTML) +@LYNXCFG_MAKE@ sed -n -e '/Config_Type *Config_Table/,/{0, *0, *0}/ p' $(SRC_DIR)/LYReadCFG.i | \ +@LYNXCFG_MAKE@ sed -e 's/ *{ *"\([^"]*\)".*/\1/' | \ +@LYNXCFG_MAKE@ perl $(scripts_dir)/cfg2html.pl -ams $(srcdir)/lynx.cfg +@LYNXCFG_MAKE@ -rm -f $(SRC_DIR)/LYReadCFG.i + +help_files.sed : makefile $(srcdir)/lynx_help/help_files.txt + @echo "Constructing sed-script $@" + @-rm -f $@ help_files.tmp + @cat $(srcdir)/lynx_help/help_files.txt > help_files.tmp +@LYNXDOC_MAKE@ @ECHO_CC@echo 's!$(LYNXDOCS_URL)!file://$(docdir)/!g' >> help_files.tmp +@LYNXCFG_MAKE@ @ECHO_CC@echo 's!$(LYNXHELP_URL)alphatoc.html!alphatoc.html!g' >> help_files.tmp +@LYNXCFG_MAKE@ @ECHO_CC@echo 's!$(LYNXHELP_URL)cattoc.html!cattoc.html!g' >> help_files.tmp +@LYNXCFG_MAKE@ @ECHO_CC@echo 's!alphatoc\.html!alphatoc.html$(COMPRESS_EXT)!g' >> help_files.tmp +@LYNXCFG_MAKE@ @ECHO_CC@echo 's!cattoc\.html!cattoc.html$(COMPRESS_EXT)!g' >> help_files.tmp +@LYNXCFG_MAKE@ @ECHO_CC@echo 's!body\.html!body.html$(COMPRESS_EXT)!g' >> help_files.tmp + @ECHO_CC@sed -e '/^#/d' -e '/^$$/d' \ + -e 's%\(.*\)=\(.*\@.*\)$$%s=@\1@=\2=g%' \ + -e 's%\(.*\)=\(http:.*\)$$%s=@\1@=\2=g%' \ + -e 's%\(.*\)=\(ftp:.*\)$$%s=@\1@=\2=g%' \ + -e 's%\(.*\)=\(.*\.html\)$$%s=@\1@=\2$(COMPRESS_EXT)=g%' \ + help_files.tmp | $(FIX_SED) > $@ + @echo Appending interim-fix for existing html files to $@ + @ECHO_CC@sed -e '/^#/d' -e '/[:@]/d' -e '/^$$/d' \ + -e 's%\(.*\)=\(.*\.html\)$$%s=\2=\2$(COMPRESS_EXT)=g%' \ + -e 's%\.html=%\\.html=%' \ + help_files.tmp | $(FIX_SED) >> $@ + @ECHO_CC@if test -n "$(COMPRESS_EXT)"; then echo "s%\\(\$(COMPRESS_EXT)\\)*\$(COMPRESS_EXT)%$(COMPRESS_EXT)%g" >> $@; fi + @-rm -f help_files.tmp + +install-help : htmlized_cfg help_files.sed $(HELPDIR) $(SYSCONFDIR) + -$(SHELL) -c 'if cd "$(HELPDIR)" ; then \ + WD=`pwd` ; \ + TAIL=`basename "$(helpdir)"` ; \ + HEAD=`echo "$$WD"|sed -e "s,/$${TAIL}$$,,"` ; \ + test "x$$WD" != "x$$HEAD" && rm -fr * ; \ + fi';\ + test -d $(HELPDIR)/keystrokes || mkdir $(HELPDIR)/keystrokes + @echo "Translating/copying html files" +@LYNXCFG_MAKE@ @$(SHELL) -c 'for f in $(CFG2HTML) ; do \ +@LYNXCFG_MAKE@ sed -f help_files.sed $$f > $(HELPDIR)/$$f ; \ +@LYNXCFG_MAKE@ done' + @ECHO_CC@$(SHELL) -c 'sed_prog=`pwd`/help_files.sed && \ + cd $(srcdir)/lynx_help && \ + dirs=keystrokes && \ + files="*.html */*.html" && \ + for f in $$files ; do \ + sed -f $$sed_prog $$f > $(HELPDIR)/$$f ; \ + done && \ + if test "$(COMPRESS_PROG)" != "" ; then \ + (cd $(HELPDIR) && $(COMPRESS_PROG) $$files ) \ + fi' + @echo "Updating $(sysconfdir)/lynx.cfg" + @ECHO_CC@$(SHELL) -c \ + 'if test -f $(SYSCONFDIR)/lynx.cfg ; then \ + mv $(SYSCONFDIR)/lynx.cfg $(SYSCONFDIR)/lynx.tmp ; \ + else \ + cp $(srcdir)/lynx.cfg $(SYSCONFDIR)/lynx.tmp ; \ + fi' + @echo "Updating $(sysconfdir)/lynx.cfg to point to installed help-files" + @ECHO_CC@sed -e '/^HELPFILE:http/s!^!#!' \ + -e '/^#HELPFILE:file/s!#!!' \ + $(SYSCONFDIR)/lynx.tmp | \ + $(SHELL) $(scripts_dir)/cfg_path.sh lynx_help $(helpdir) | \ + $(SHELL) $(scripts_dir)/cfg_path.sh lynx_doc $(helpdir) | \ + sed -e '/^HELPFILE:file/s!$$!$(COMPRESS_EXT)!' \ + -e '/^HELPFILE:file/s!$(COMPRESS_EXT)$(COMPRESS_EXT)$$!$(COMPRESS_EXT)!' \ + >$(SYSCONFDIR)/lynx.cfg ;\ + chmod 644 $(SYSCONFDIR)/lynx.cfg ;\ + rm -f $(SYSCONFDIR)/lynx.tmp + +LYHelp.h : help_files.sed $(srcdir)/LYHelp.hin + @echo "Creating $@" + @sed -f help_files.sed $(srcdir)/LYHelp.hin > $@ + @echo '**********************************************' + @echo + @$(SHELL) -c 'if test "$(COMPRESS_PROG)" = "" ; then \ + echo " Help files will NOT be gzipped."; \ + else \ + echo " Help links point to compressed files"; \ + echo " To access them properly you have to type"; \ + echo " make install-help"; \ + fi' + @echo + @echo '**********************************************' + +cfg_defs.h : $(scripts_dir)/cfg_defs.sh $(scripts_dir)/cfg_edit.sh config.cache lynx_cfg.h + @rm -f $@ + @$(SHELL) -c 'SHELL=$(SHELL) FGREP="$(FGREP)" $(SHELL) $(scripts_dir)/cfg_defs.sh $(srcdir)' + +install-cfg : $(SYSCONFDIR) + @$(SHELL) -c 'SHELL=$(SHELL) EGREP="$(EGREP)" FGREP="$(FGREP)" $(SHELL) $(scripts_dir)/install-cfg.sh "$(INSTALL_DATA)" $(srcdir)/lynx.cfg $(SYSCONFDIR)/lynx.cfg' + +install-lss : $(SYSCONFDIR) + @$(SHELL) $(scripts_dir)/install-lss.sh "$(INSTALL_DATA)" $(srcdir)/samples/lynx.lss $(SYSCONFDIR)/lynx.lss + +uninstall :: +@MSG_DIR_MAKE@ ( cd $(PO_DIR) && $(MAKE_RECUR) uninstall ) + -rm -f $(BINDIR)/$(binary_PROG) ;\ + rm -f $(MANDIR)/$(actual_PROG).1 ;\ + rm -f $(SYSCONFDIR)/lynx.cfg ;\ + rm -f $(SYSCONFDIR)/lynx.lss + +uninstall \ +uninstall-help :: + -$(SHELL) -c 'if test -d "$(HELPDIR)" ; then \ + WD=`cd "$(HELPDIR)" && pwd` ; \ + TAIL=`basename "$(helpdir)"` ; \ + HEAD=`echo "$$WD"|sed -e "s,/$${TAIL}$$,,"` ; \ + test "x$$WD" != "x$$HEAD" && rm -rf "$(HELPDIR)"; \ + fi' + +uninstall \ +uninstall-doc :: + -$(SHELL) -c 'if test -d "$(DOCDIR)" ; then \ + WD=`cd "$(DOCDIR)" && pwd` ; \ + TAIL=`basename "$(docdir)"` ; \ + HEAD=`echo "$$WD"|sed -e "s,/$${TAIL}$$,,"` ; \ + test "x$$WD" != "x$$HEAD" && rm -rf "$(DOCDIR)"; \ + fi' ;\ + $(SHELL) -c 'if test -d "$(HELPDIR)" ; then \ + WD=`cd "$(HELPDIR)" && pwd` ; \ + TAIL=`basename "$(helpdir)"` ; \ + HEAD=`echo "$$WD"|sed -e "s,/'$${TAIL}'$$,,"` ; \ + test "x$$WD" != "x$$HEAD" ; \ + cd "$(HELPDIR)" && rm -f COPYING COPYHEADER ; \ + fi' + +update-po: + rsync -Lrtvz translationproject.org::tp/latest/lynx/ $(PO_SRCDIR) ;\ + ( test -f $(PO_SRCDIR)/makefile && cd $(PO_SRCDIR) && $(MAKE_RECUR) $@ ) + +preinstall : + @ echo '' ;\ + echo '** Configuration summary for LYNX $(LYNX_VERSION):' ;\ + echo '' ;\ + echo ' program name: '$(actual_PROG) ;\ + echo '' ;\ + echo ' bin directory: '$(BINDIR) ;\ + echo ' config directory: '$(SYSCONFDIR) ;\ + echo ' man directory: '$(MANDIR) ;\ + echo ' help directory: '$(HELPDIR) ;\ + echo ' doc directory: '$(DOCDIR) + +$(BINDIR) \ +$(MANDIR) \ +$(SYSCONFDIR) \ +$(HELPDIR) \ +$(DOCDIR) : + mkdir -p $@ |