From 25505898530a333011f4fd5cbc841ad6b26c089c Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 16:40:04 +0200 Subject: Adding upstream version 1:9.2p1. Signed-off-by: Daniel Baumann --- PROTOCOL | 715 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 715 insertions(+) create mode 100644 PROTOCOL (limited to 'PROTOCOL') diff --git a/PROTOCOL b/PROTOCOL new file mode 100644 index 0000000..27804d0 --- /dev/null +++ b/PROTOCOL @@ -0,0 +1,715 @@ +This documents OpenSSH's deviations and extensions to the published SSH +protocol. + +Note that OpenSSH's sftp and sftp-server implement revision 3 of the SSH +filexfer protocol described in: + +https://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt + +Newer versions of the draft will not be supported, though some features +are individually implemented as extensions described below. + +The protocol used by OpenSSH's ssh-agent is described in the file +PROTOCOL.agent + +1. Transport protocol changes + +1.1. transport: Protocol 2 MAC algorithm "umac-64@openssh.com" + +This is a new transport-layer MAC method using the UMAC algorithm +(rfc4418). This method is identical to the "umac-64" method documented +in: + +https://www.openssh.com/txt/draft-miller-secsh-umac-01.txt + +1.2. transport: Protocol 2 compression algorithm "zlib@openssh.com" + +This transport-layer compression method uses the zlib compression +algorithm (identical to the "zlib" method in rfc4253), but delays the +start of compression until after authentication has completed. This +avoids exposing compression code to attacks from unauthenticated users. + +The method is documented in: + +https://www.openssh.com/txt/draft-miller-secsh-compression-delayed-00.txt + +1.3. transport: New public key algorithms "ssh-rsa-cert-v01@openssh.com", + "ssh-dsa-cert-v01@openssh.com", + "ecdsa-sha2-nistp256-cert-v01@openssh.com", + "ecdsa-sha2-nistp384-cert-v01@openssh.com" and + "ecdsa-sha2-nistp521-cert-v01@openssh.com" + +OpenSSH introduces new public key algorithms to support certificate +authentication for users and host keys. These methods are documented +in the file PROTOCOL.certkeys + +1.4. transport: Elliptic Curve cryptography + +OpenSSH supports ECC key exchange and public key authentication as +specified in RFC5656. Only the ecdsa-sha2-nistp256, ecdsa-sha2-nistp384 +and ecdsa-sha2-nistp521 curves over GF(p) are supported. Elliptic +curve points encoded using point compression are NOT accepted or +generated. + +1.5 transport: Protocol 2 Encrypt-then-MAC MAC algorithms + +OpenSSH supports MAC algorithms, whose names contain "-etm", that +perform the calculations in a different order to that defined in RFC +4253. These variants use the so-called "encrypt then MAC" ordering, +calculating the MAC over the packet ciphertext rather than the +plaintext. This ordering closes a security flaw in the SSH transport +protocol, where decryption of unauthenticated ciphertext provided a +"decryption oracle" that could, in conjunction with cipher flaws, reveal +session plaintext. + +Specifically, the "-etm" MAC algorithms modify the transport protocol +to calculate the MAC over the packet ciphertext and to send the packet +length unencrypted. This is necessary for the transport to obtain the +length of the packet and location of the MAC tag so that it may be +verified without decrypting unauthenticated data. + +As such, the MAC covers: + + mac = MAC(key, sequence_number || packet_length || encrypted_packet) + +where "packet_length" is encoded as a uint32 and "encrypted_packet" +contains: + + byte padding_length + byte[n1] payload; n1 = packet_length - padding_length - 1 + byte[n2] random padding; n2 = padding_length + +1.6 transport: AES-GCM + +OpenSSH supports the AES-GCM algorithm as specified in RFC 5647. +Because of problems with the specification of the key exchange +the behaviour of OpenSSH differs from the RFC as follows: + +AES-GCM is only negotiated as the cipher algorithms +"aes128-gcm@openssh.com" or "aes256-gcm@openssh.com" and never as +an MAC algorithm. Additionally, if AES-GCM is selected as the cipher +the exchanged MAC algorithms are ignored and there doesn't have to be +a matching MAC. + +1.7 transport: chacha20-poly1305@openssh.com authenticated encryption + +OpenSSH supports authenticated encryption using ChaCha20 and Poly1305 +as described in PROTOCOL.chacha20poly1305. + +1.8 transport: curve25519-sha256@libssh.org key exchange algorithm + +OpenSSH supports the use of ECDH in Curve25519 for key exchange as +described at: +http://git.libssh.org/users/aris/libssh.git/plain/doc/curve25519-sha256@libssh.org.txt?h=curve25519 + +This is identical to curve25519-sha256 as later published in RFC8731. + +2. Connection protocol changes + +2.1. connection: Channel write close extension "eow@openssh.com" + +The SSH connection protocol (rfc4254) provides the SSH_MSG_CHANNEL_EOF +message to allow an endpoint to signal its peer that it will send no +more data over a channel. Unfortunately, there is no symmetric way for +an endpoint to request that its peer should cease sending data to it +while still keeping the channel open for the endpoint to send data to +the peer. + +This is desirable, since it saves the transmission of data that would +otherwise need to be discarded and it allows an endpoint to signal local +processes of the condition, e.g. by closing the corresponding file +descriptor. + +OpenSSH implements a channel extension message to perform this +signalling: "eow@openssh.com" (End Of Write). This message is sent by +an endpoint when the local output of a session channel is closed or +experiences a write error. The message is formatted as follows: + + byte SSH_MSG_CHANNEL_REQUEST + uint32 recipient channel + string "eow@openssh.com" + boolean FALSE + +On receiving this message, the peer SHOULD cease sending data of +the channel and MAY signal the process from which the channel data +originates (e.g. by closing its read file descriptor). + +As with the symmetric SSH_MSG_CHANNEL_EOF message, the channel does +remain open after a "eow@openssh.com" has been sent and more data may +still be sent in the other direction. This message does not consume +window space and may be sent even if no window space is available. + +NB. due to certain broken SSH implementations aborting upon receipt +of this message (in contravention of RFC4254 section 5.4), this +message is only sent to OpenSSH peers (identified by banner). +Other SSH implementations may be listed to receive this message +upon request. + +2.2. connection: disallow additional sessions extension + "no-more-sessions@openssh.com" + +Most SSH connections will only ever request a single session, but a +attacker may abuse a running ssh client to surreptitiously open +additional sessions under their control. OpenSSH provides a global +request "no-more-sessions@openssh.com" to mitigate this attack. + +When an OpenSSH client expects that it will never open another session +(i.e. it has been started with connection multiplexing disabled), it +will send the following global request: + + byte SSH_MSG_GLOBAL_REQUEST + string "no-more-sessions@openssh.com" + char want-reply + +On receipt of such a message, an OpenSSH server will refuse to open +future channels of type "session" and instead immediately abort the +connection. + +Note that this is not a general defence against compromised clients +(that is impossible), but it thwarts a simple attack. + +NB. due to certain broken SSH implementations aborting upon receipt +of this message, the no-more-sessions request is only sent to OpenSSH +servers (identified by banner). Other SSH implementations may be +listed to receive this message upon request. + +2.3. connection: Tunnel forward extension "tun@openssh.com" + +OpenSSH supports layer 2 and layer 3 tunnelling via the "tun@openssh.com" +channel type. This channel type supports forwarding of network packets +with datagram boundaries intact between endpoints equipped with +interfaces like the BSD tun(4) device. Tunnel forwarding channels are +requested by the client with the following packet: + + byte SSH_MSG_CHANNEL_OPEN + string "tun@openssh.com" + uint32 sender channel + uint32 initial window size + uint32 maximum packet size + uint32 tunnel mode + uint32 remote unit number + +The "tunnel mode" parameter specifies whether the tunnel should forward +layer 2 frames or layer 3 packets. It may take one of the following values: + + SSH_TUNMODE_POINTOPOINT 1 /* layer 3 packets */ + SSH_TUNMODE_ETHERNET 2 /* layer 2 frames */ + +The "tunnel unit number" specifies the remote interface number, or may +be 0x7fffffff to allow the server to automatically choose an interface. A +server that is not willing to open a client-specified unit should refuse +the request with a SSH_MSG_CHANNEL_OPEN_FAILURE error. On successful +open, the server should reply with SSH_MSG_CHANNEL_OPEN_SUCCESS. + +Once established the client and server may exchange packet or frames +over the tunnel channel by encapsulating them in SSH protocol strings +and sending them as channel data. This ensures that packet boundaries +are kept intact. Specifically, packets are transmitted using normal +SSH_MSG_CHANNEL_DATA packets: + + byte SSH_MSG_CHANNEL_DATA + uint32 recipient channel + string data + +The contents of the "data" field for layer 3 packets is: + + uint32 packet length + uint32 address family + byte[packet length - 4] packet data + +The "address family" field identifies the type of packet in the message. +It may be one of: + + SSH_TUN_AF_INET 2 /* IPv4 */ + SSH_TUN_AF_INET6 24 /* IPv6 */ + +The "packet data" field consists of the IPv4/IPv6 datagram itself +without any link layer header. + +The contents of the "data" field for layer 2 packets is: + + uint32 packet length + byte[packet length] frame + +The "frame" field contains an IEEE 802.3 Ethernet frame, including +header. + +2.4. connection: Unix domain socket forwarding + +OpenSSH supports local and remote Unix domain socket forwarding +using the "streamlocal" extension. Forwarding is initiated as per +TCP sockets but with a single path instead of a host and port. + +Similar to direct-tcpip, direct-streamlocal is sent by the client +to request that the server make a connection to a Unix domain socket. + + byte SSH_MSG_CHANNEL_OPEN + string "direct-streamlocal@openssh.com" + uint32 sender channel + uint32 initial window size + uint32 maximum packet size + string socket path + string reserved + uint32 reserved + +Similar to forwarded-tcpip, forwarded-streamlocal is sent by the +server when the client has previously send the server a streamlocal-forward +GLOBAL_REQUEST. + + byte SSH_MSG_CHANNEL_OPEN + string "forwarded-streamlocal@openssh.com" + uint32 sender channel + uint32 initial window size + uint32 maximum packet size + string socket path + string reserved for future use + +The reserved field is not currently defined and is ignored on the +remote end. It is intended to be used in the future to pass +information about the socket file, such as ownership and mode. +The client currently sends the empty string for this field. + +Similar to tcpip-forward, streamlocal-forward is sent by the client +to request remote forwarding of a Unix domain socket. + + byte SSH2_MSG_GLOBAL_REQUEST + string "streamlocal-forward@openssh.com" + boolean TRUE + string socket path + +Similar to cancel-tcpip-forward, cancel-streamlocal-forward is sent +by the client cancel the forwarding of a Unix domain socket. + + byte SSH2_MSG_GLOBAL_REQUEST + string "cancel-streamlocal-forward@openssh.com" + boolean FALSE + string socket path + +2.5. connection: hostkey update and rotation "hostkeys-00@openssh.com" +and "hostkeys-prove-00@openssh.com" + +OpenSSH supports a protocol extension allowing a server to inform +a client of all its protocol v.2 host keys after user-authentication +has completed. + + byte SSH_MSG_GLOBAL_REQUEST + string "hostkeys-00@openssh.com" + char 0 /* want-reply */ + string[] hostkeys + +Upon receiving this message, a client should check which of the +supplied host keys are present in known_hosts. + +Note that the server may send key types that the client does not +support. The client should disregard such keys if they are received. + +If the client identifies any keys that are not present for the host, +it should send a "hostkeys-prove@openssh.com" message to request the +server prove ownership of the private half of the key. + + byte SSH_MSG_GLOBAL_REQUEST + string "hostkeys-prove-00@openssh.com" + char 1 /* want-reply */ + string[] hostkeys + +When a server receives this message, it should generate a signature +using each requested key over the following: + + string "hostkeys-prove-00@openssh.com" + string session identifier + string hostkey + +These signatures should be included in the reply, in the order matching +the hostkeys in the request: + + byte SSH_MSG_REQUEST_SUCCESS + string[] signatures + +When the client receives this reply (and not a failure), it should +validate the signatures and may update its known_hosts file, adding keys +that it has not seen before and deleting keys for the server host that +are no longer offered. + +These extensions let a client learn key types that it had not previously +encountered, thereby allowing it to potentially upgrade from weaker +key algorithms to better ones. It also supports graceful key rotation: +a server may offer multiple keys of the same type for a period (to +give clients an opportunity to learn them using this extension) before +removing the deprecated key from those offered. + +2.6. connection: SIGINFO support for "signal" channel request + +The SSH channels protocol (RFC4254 section 6.9) supports sending a +signal to a session attached to a channel. OpenSSH supports one +extension signal "INFO@openssh.com" that allows sending SIGINFO on +BSD-derived systems. + +3. Authentication protocol changes + +3.1. Host-bound public key authentication + +This is trivial change to the traditional "publickey" authentication +method. The authentication request is identical to the original method +but for the name and one additional field: + + byte SSH2_MSG_USERAUTH_REQUEST + string username + string "ssh-connection" + string "publickey-hostbound-v00@openssh.com" + bool has_signature + string pkalg + string public key + string server host key + +Because the entire SSH2_MSG_USERAUTH_REQUEST message is included in +the signed data, this ensures that a binding between the destination +user, the server identity and the session identifier is visible to the +signer. OpenSSH uses this binding via signed data to implement per-key +restrictions in ssh-agent. + +A server may advertise this method using the SSH2_MSG_EXT_INFO +mechanism (RFC8308), with the following message: + + string "publickey-hostbound@openssh.com" + string "0" (version) + +Clients should prefer host-bound authentication when advertised by +server. + +4. SFTP protocol changes + +4.1. sftp: Reversal of arguments to SSH_FXP_SYMLINK + +When OpenSSH's sftp-server was implemented, the order of the arguments +to the SSH_FXP_SYMLINK method was inadvertently reversed. Unfortunately, +the reversal was not noticed until the server was widely deployed. Since +fixing this to follow the specification would cause incompatibility, the +current order was retained. For correct operation, clients should send +SSH_FXP_SYMLINK as follows: + + uint32 id + string targetpath + string linkpath + +4.2. sftp: Server extension announcement in SSH_FXP_VERSION + +OpenSSH's sftp-server lists the extensions it supports using the +standard extension announcement mechanism in the SSH_FXP_VERSION server +hello packet: + + uint32 3 /* protocol version */ + string ext1-name + string ext1-version + string ext2-name + string ext2-version + ... + string extN-name + string extN-version + +Each extension reports its integer version number as an ASCII encoded +string, e.g. "1". The version will be incremented if the extension is +ever changed in an incompatible way. The server MAY advertise the same +extension with multiple versions (though this is unlikely). Clients MUST +check the version number before attempting to use the extension. + +4.3. sftp: Extension request "posix-rename@openssh.com" + +This operation provides a rename operation with POSIX semantics, which +are different to those provided by the standard SSH_FXP_RENAME in +draft-ietf-secsh-filexfer-02.txt. This request is implemented as a +SSH_FXP_EXTENDED request with the following format: + + uint32 id + string "posix-rename@openssh.com" + string oldpath + string newpath + +On receiving this request the server will perform the POSIX operation +rename(oldpath, newpath) and will respond with a SSH_FXP_STATUS message. +This extension is advertised in the SSH_FXP_VERSION hello with version +"1". + +4.4. sftp: Extension requests "statvfs@openssh.com" and + "fstatvfs@openssh.com" + +These requests correspond to the statvfs and fstatvfs POSIX system +interfaces. The "statvfs@openssh.com" request operates on an explicit +pathname, and is formatted as follows: + + uint32 id + string "statvfs@openssh.com" + string path + +The "fstatvfs@openssh.com" operates on an open file handle: + + uint32 id + string "fstatvfs@openssh.com" + string handle + +These requests return a SSH_FXP_STATUS reply on failure. On success they +return the following SSH_FXP_EXTENDED_REPLY reply: + + uint32 id + uint64 f_bsize /* file system block size */ + uint64 f_frsize /* fundamental fs block size */ + uint64 f_blocks /* number of blocks (unit f_frsize) */ + uint64 f_bfree /* free blocks in file system */ + uint64 f_bavail /* free blocks for non-root */ + uint64 f_files /* total file inodes */ + uint64 f_ffree /* free file inodes */ + uint64 f_favail /* free file inodes for to non-root */ + uint64 f_fsid /* file system id */ + uint64 f_flag /* bit mask of f_flag values */ + uint64 f_namemax /* maximum filename length */ + +The values of the f_flag bitmask are as follows: + + #define SSH_FXE_STATVFS_ST_RDONLY 0x1 /* read-only */ + #define SSH_FXE_STATVFS_ST_NOSUID 0x2 /* no setuid */ + +Both the "statvfs@openssh.com" and "fstatvfs@openssh.com" extensions are +advertised in the SSH_FXP_VERSION hello with version "2". + +4.5. sftp: Extension request "hardlink@openssh.com" + +This request is for creating a hard link to a regular file. This +request is implemented as a SSH_FXP_EXTENDED request with the +following format: + + uint32 id + string "hardlink@openssh.com" + string oldpath + string newpath + +On receiving this request the server will perform the operation +link(oldpath, newpath) and will respond with a SSH_FXP_STATUS message. +This extension is advertised in the SSH_FXP_VERSION hello with version +"1". + +4.6. sftp: Extension request "fsync@openssh.com" + +This request asks the server to call fsync(2) on an open file handle. + + uint32 id + string "fsync@openssh.com" + string handle + +On receiving this request, a server will call fsync(handle_fd) and will +respond with a SSH_FXP_STATUS message. + +This extension is advertised in the SSH_FXP_VERSION hello with version +"1". + +4.7. sftp: Extension request "lsetstat@openssh.com" + +This request is like the "setstat" command, but sets file attributes on +symlinks. It is implemented as a SSH_FXP_EXTENDED request with the +following format: + + uint32 id + string "lsetstat@openssh.com" + string path + ATTRS attrs + +See the "setstat" command for more details. + +This extension is advertised in the SSH_FXP_VERSION hello with version +"1". + +4.8. sftp: Extension request "limits@openssh.com" + +This request is used to determine various limits the server might impose. +Clients should not attempt to exceed these limits as the server might sever +the connection immediately. + + uint32 id + string "limits@openssh.com" + +The server will respond with a SSH_FXP_EXTENDED_REPLY reply: + + uint32 id + uint64 max-packet-length + uint64 max-read-length + uint64 max-write-length + uint64 max-open-handles + +The 'max-packet-length' applies to the total number of bytes in a +single SFTP packet. Servers SHOULD set this at least to 34000. + +The 'max-read-length' is the largest length in a SSH_FXP_READ packet. +Even if the client requests a larger size, servers will usually respond +with a shorter SSH_FXP_DATA packet. Servers SHOULD set this at least to +32768. + +The 'max-write-length' is the largest length in a SSH_FXP_WRITE packet +the server will accept. Servers SHOULD set this at least to 32768. + +The 'max-open-handles' is the maximum number of active handles that the +server allows (e.g. handles created by SSH_FXP_OPEN and SSH_FXP_OPENDIR +packets). Servers MAY count internal file handles against this limit +(e.g. system logging or stdout/stderr), so clients SHOULD NOT expect to +open this many handles in practice. + +If the server doesn't enforce a specific limit, then the field may be +set to 0. This implies the server relies on the OS to enforce limits +(e.g. available memory or file handles), and such limits might be +dynamic. The client SHOULD take care to not try to exceed reasonable +limits. + +This extension is advertised in the SSH_FXP_VERSION hello with version +"1". + +4.9. sftp: Extension request "expand-path@openssh.com" + +This request supports canonicalisation of relative paths and +those that need tilde-expansion, i.e. "~", "~/..." and "~user/..." +These paths are expanded using shell-like rules and the resultant +path is canonicalised similarly to SSH2_FXP_REALPATH. + +It is implemented as a SSH_FXP_EXTENDED request with the following +format: + + uint32 id + string "expand-path@openssh.com" + string path + +Its reply is the same format as that of SSH2_FXP_REALPATH. + +This extension is advertised in the SSH_FXP_VERSION hello with version +"1". + +4.10. sftp: Extension request "copy-data" + +This request asks the server to copy data from one open file handle and +write it to a different open file handle. This avoids needing to transfer +the data across the network twice (a download followed by an upload). + + byte SSH_FXP_EXTENDED + uint32 id + string "copy-data" + string read-from-handle + uint64 read-from-offset + uint64 read-data-length + string write-to-handle + uint64 write-to-offset + +The server will copy read-data-length bytes starting from +read-from-offset from the read-from-handle and write them to +write-to-handle starting from write-to-offset, and then respond with a +SSH_FXP_STATUS message. + +It's equivalent to issuing a series of SSH_FXP_READ requests on +read-from-handle and a series of requests of SSH_FXP_WRITE on +write-to-handle. + +If read-from-handle and write-to-handle are the same, the server will +fail the request and respond with a SSH_FX_INVALID_PARAMETER message. + +If read-data-length is 0, then the server will read data from the +read-from-handle until EOF is reached. + +This extension is advertised in the SSH_FXP_VERSION hello with version +"1". + +This request is identical to the "copy-data" request documented in: + +https://tools.ietf.org/html/draft-ietf-secsh-filexfer-extensions-00#section-7 + +4.11. sftp: Extension request "home-directory" + +This request asks the server to expand the specified user's home directory. +An empty username implies the current user. This can be used by the client +to expand ~/ type paths locally. + + byte SSH_FXP_EXTENDED + uint32 id + string "home-directory" + string username + +This extension is advertised in the SSH_FXP_VERSION hello with version +"1". + +This provides similar information as the "expand-path@openssh.com" extension. + +This request is identical to the "home-directory" request documented in: + +https://datatracker.ietf.org/doc/html/draft-ietf-secsh-filexfer-extensions-00#section-5 + +4.12. sftp: Extension request "users-groups-by-id@openssh.com" + +This request asks the server to return user and/or group names that +correspond to one or more IDs (e.g. as returned from a SSH_FXP_STAT +request). This may be used by the client to provide usernames in +directory listings. + + byte SSH_FXP_EXTENDED + uint32 id + string "users-groups-by-id@openssh.com" + string uids + string gids + +Where "uids" and "gids" consists of one or more integer user or group +identifiers: + + uint32 id-0 + ... + +The server will reply with a SSH_FXP_EXTENDED_REPLY: + + byte SSH_FXP_EXTENDED_REPLY + string usernames + string groupnames + +Where "username" and "groupnames" consists of names in identical request +order to "uids" and "gids" respectively: + + string name-0 + ... + +If a name cannot be identified for a given user or group ID, an empty +string will be returned in its place. + +It is acceptable for either "uids" or "gids" to be an empty set, in +which case the respective "usernames" or "groupnames" list will also +be empty. + +This extension is advertised in the SSH_FXP_VERSION hello with version +"1". + +5. Miscellaneous changes + +5.1 Public key format + +OpenSSH public keys, as generated by ssh-keygen(1) and appearing in +authorized_keys files, are formatted as a single line of text consisting +of the public key algorithm name followed by a base64-encoded key blob. +The public key blob (before base64 encoding) is the same format used for +the encoding of public keys sent on the wire: as described in RFC4253 +section 6.6 for RSA and DSA keys, RFC5656 section 3.1 for ECDSA keys +and the "New public key formats" section of PROTOCOL.certkeys for the +OpenSSH certificate formats. + +5.2 Private key format + +OpenSSH private keys, as generated by ssh-keygen(1) use the format +described in PROTOCOL.key by default. As a legacy option, PEM format +(RFC7468) private keys are also supported for RSA, DSA and ECDSA keys +and were the default format before OpenSSH 7.8. + +5.3 KRL format + +OpenSSH supports a compact format for Key Revocation Lists (KRLs). This +format is described in the PROTOCOL.krl file. + +5.4 Connection multiplexing + +OpenSSH's connection multiplexing uses messages as described in +PROTOCOL.mux over a Unix domain socket for communications between a +master instance and later clients. + +5.5. Agent protocol extensions + +OpenSSH extends the usual agent protocol. These changes are documented +in the PROTOCOL.agent file. + +$OpenBSD: PROTOCOL,v 1.48 2022/11/07 01:53:01 dtucker Exp $ -- cgit v1.2.3