diff options
Diffstat (limited to 'spa/plugins/alsa/mixer/profile-sets')
26 files changed, 2663 insertions, 0 deletions
diff --git a/spa/plugins/alsa/mixer/profile-sets/analog-only.conf b/spa/plugins/alsa/mixer/profile-sets/analog-only.conf new file mode 100644 index 0000000..badd5ec --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/analog-only.conf @@ -0,0 +1,102 @@ +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; Some USB DACs appear to support IEC958, but don't physically have any +; digital outputs. + +[General] +auto-profiles = yes + +[Mapping analog-stereo] +device-strings = front:%f +channel-map = left,right +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic +priority = 15 + +# If everything else fails, try to use hw:0 as a stereo device... +[Mapping stereo-fallback] +device-strings = hw:%f +fallback = yes +channel-map = front-left,front-right +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic +priority = 1 + +# ...and if even that fails, try to use hw:0 as a mono device. +[Mapping mono-fallback] +device-strings = hw:%f +fallback = yes +channel-map = mono +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headset-mic +priority = 1 + +[Mapping analog-surround-21] +device-strings = surround21:%f +channel-map = front-left,front-right,lfe +paths-input = analog-input analog-input-linein analog-input-mic +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 13 + +[Mapping analog-surround-40] +device-strings = surround40:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-input = analog-input analog-input-linein analog-input-mic +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 12 + +[Mapping analog-surround-41] +device-strings = surround41:%f +channel-map = front-left,front-right,rear-left,rear-right,lfe +paths-input = analog-input analog-input-linein analog-input-mic +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 13 + +[Mapping analog-surround-50] +device-strings = surround50:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center +paths-input = analog-input analog-input-linein analog-input-mic +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 12 + +[Mapping analog-surround-51] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-input = analog-input analog-input-linein analog-input-mic +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 13 + +[Mapping analog-surround-71] +device-strings = surround71:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +description = Analog Surround 7.1 +paths-input = analog-input analog-input-linein analog-input-mic +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 12 + +[Mapping multichannel-output] +device-strings = hw:%f +channel-map = left,right,rear-left,rear-right +exact-channels = false +fallback = yes +priority = 1 +direction = output + +[Mapping multichannel-input] +device-strings = hw:%f +channel-map = left,right,rear-left,rear-right +exact-channels = false +fallback = yes +priority = 1 +direction = input diff --git a/spa/plugins/alsa/mixer/profile-sets/asus-xonar-se.conf b/spa/plugins/alsa/mixer/profile-sets/asus-xonar-se.conf new file mode 100644 index 0000000..3e42ea3 --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/asus-xonar-se.conf @@ -0,0 +1,93 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; ASUS Xonar SE card. +; This card has two devices for each rear and front panel jacks. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = yes + +[Mapping analog-stereo-front] +description = Analog Stereo Front +device-strings = hw:%f,1 +channel-map = left,right +paths-output = analog-output analog-output-headphones +paths-input = analog-input-mic analog-input-headphone-mic analog-input-headset-mic +priority = 15 + +[Mapping analog-stereo-rear] +description = Analog Stereo Rear +device-strings = hw:%f,0 +channel-map = left,right +paths-output = analog-output analog-output-speaker +paths-input = analog-input analog-input-mic analog-input-linein +priority = 14 + +[Mapping analog-surround-21] +device-strings = surround21:%f +channel-map = front-left,front-right,lfe +paths-output = analog-output-speaker +priority = 13 +direction = output + +[Mapping analog-surround-40] +device-strings = surround40:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-output = analog-output-speaker +priority = 12 +direction = output + +[Mapping analog-surround-41] +device-strings = surround41:%f +channel-map = front-left,front-right,rear-left,rear-right,lfe +paths-output = analog-output-speaker +priority = 13 +direction = output + +[Mapping analog-surround-50] +device-strings = surround50:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center +paths-output = analog-output-speaker +priority = 12 +direction = output + +[Mapping analog-surround-51] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = analog-output-speaker +priority = 13 +direction = output + +[Mapping iec958-stereo] +device-strings = iec958:%f +channel-map = left,right +paths-output = iec958-stereo-output +priority = 5 + +[Mapping iec958-ac3-surround-40] +device-strings = a52:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-output = iec958-stereo-output +priority = 2 +direction = output + +[Mapping iec958-ac3-surround-51] +device-strings = a52:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = iec958-stereo-output +priority = 3 +direction = output diff --git a/spa/plugins/alsa/mixer/profile-sets/audigy.conf b/spa/plugins/alsa/mixer/profile-sets/audigy.conf new file mode 100644 index 0000000..043596e --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/audigy.conf @@ -0,0 +1,94 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; Creative Sound Blaster Audigy product line +; +; These are just copies of the mappings we find in default.conf, with the +; small change of making analog-stereo and analog-mono non-fallback mappings. +; This is needed because these cards only support duplex profiles with mono +; inputs, and in the default configuration, with stereo being a fallback +; mapping, the mono mapping is never tried. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = yes + +# Based on stereo-fallback +[Mapping analog-stereo] +device-strings = hw:%f +channel-map = front-left,front-right +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic +priority = 1 + +# Based on mono-fallback +[Mapping analog-mono] +device-strings = hw:%f +channel-map = mono +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headset-mic +priority = 1 + +# The rest of these are identical to what's in default.conf +[Mapping analog-surround-21] +device-strings = surround21:%f +channel-map = front-left,front-right,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 13 +direction = output + +[Mapping analog-surround-40] +device-strings = surround40:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 12 +direction = output + +[Mapping analog-surround-41] +device-strings = surround41:%f +channel-map = front-left,front-right,rear-left,rear-right,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 13 +direction = output + +[Mapping analog-surround-50] +device-strings = surround50:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 12 +direction = output + +[Mapping analog-surround-51] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 13 +direction = output + +[Mapping analog-surround-71] +device-strings = surround71:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +description = Analog Surround 7.1 +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 12 +direction = output + +[Mapping iec958-stereo] +device-strings = iec958:%f +channel-map = left,right +paths-input = iec958-stereo-input +paths-output = iec958-stereo-output +priority = 5 diff --git a/spa/plugins/alsa/mixer/profile-sets/cmedia-high-speed-true-hdaudio.conf b/spa/plugins/alsa/mixer/profile-sets/cmedia-high-speed-true-hdaudio.conf new file mode 100644 index 0000000..1b6f61c --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/cmedia-high-speed-true-hdaudio.conf @@ -0,0 +1,66 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +# Config for CMEDIA USB2.0 High-Speed True HD Audio 147a:e055 +# Added by Jean-Philippe Guillemin <h1p8r10n@gmail.com> + + +[General] +auto-profiles = yes + +[Mapping analog-stereo] +device-strings = front:%f +channel-map = left,right +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic +priority = 10 + +# If everything else fails, try to use hw:0 as a stereo device. +[Mapping stereo-fallback] +device-strings = hw:%f +fallback = yes +channel-map = front-left,front-right +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic +priority = 1 + +[Mapping analog-surround-21] +device-strings = surround21:%f +channel-map = front-left,front-right,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 8 +direction = output + +[Mapping analog-surround-51] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 8 +direction = output + +[Mapping analog-surround-71] +device-strings = surround71:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +description = Analog Surround 7.1 +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 7 +direction = output + +[Mapping iec958-stereo] +device-strings = hw:%f,2 hw:%f,0 +channel-map = left,right +paths-output = iec958-stereo-output +paths-input = iec958-stereo-input +priority = 5 diff --git a/spa/plugins/alsa/mixer/profile-sets/default.conf b/spa/plugins/alsa/mixer/profile-sets/default.conf new file mode 100644 index 0000000..f0c9d2a --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/default.conf @@ -0,0 +1,580 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; Default profile definitions for the ALSA backend of PulseAudio. This +; is used as fallback for all cards that have no special mapping +; assigned (and should be good enough for the vast majority of +; cards). If you want to assign a different profile set than this one +; to a device, either set the udev property ACP_PROFILE_SET for the +; card, or use the "profile_set" module argument when loading +; module-alsa-card. +; +; So what is this about? Simply, what we do here is map ALSA devices +; to how they are exposed in PA. We say which ALSA device string to +; use to open a device, which channel mapping to use then, and which +; mixer path to use. This is encoded in a 'mapping'. Multiple of these +; mappings can be bound together in a 'profile' which is then directly +; exposed in the UI as a card profile. Each mapping assigned to a +; profile will result in one sink/source to be created if the profile +; is selected for the card. +; +; Additionally, the path set configuration files can describe the +; decibel values assigned to the steps of the volume elements. This +; can be used to work around situations when the alsa driver doesn't +; provide any decibel information, or when the information is +; incorrect. + + +; [General] +; auto-profiles = no | yes # Instead of defining all profiles manually, autogenerate +; # them by combining every input mapping with every output mapping. +; +; [Mapping id] +; device-strings = ... # ALSA device string. %f will be replaced by the card identifier. +; channel-map = ... # Channel mapping to use for this device +; description = ... # Description for the mapping. Note that it's better to set the description +; # in the well_known_descriptions table in alsa-mixer.c than with this +; # option, because the descriptions in alsa-mixer.c are translatable. +; description-key = ... # A custom key for the well_known_descriptions table (by default the mapping +; # name is used). +; paths-input = ... # A list of mixer paths to use. Every path in this list will be probed. +; # If multiple are found to be working they will be available as device ports +; paths-output = ... +; element-input = ... # Instead of configuring a full mixer path simply configure a single +; # mixer element for volume/mute handling. The value can be an element +; # name, or name and index separated by a comma. +; element-output = ... +; priority = ... +; direction = any | input | output # Only useful for? +; +; exact-channels = yes | no # If no, and the exact number of channels is not supported, +; # allow device to be opened with another channel count +; fallback = no | yes # This mapping will only be considered if all non-fallback mappings fail +; intended-roles = ... # Set the device.intended_roles property for the sink/source. +; +; [Profile id] +; input-mappings = ... # Lists mappings for sources on this profile, those mapping must be +; # defined in this file too +; output-mappings = ... # Lists mappings for sinks on this profile, those mappings must be +; # defined in this file too +; description = ... +; priority = ... # Numeric value to deduce priority for this profile +; skip-probe = no | yes # Skip probing for availability? If this is yes then this profile +; # will be assumed as working without probing. Makes initialization +; # a bit faster but only works if the card is really known well. +; +; fallback = no | yes # This profile will only be considered if all non-fallback profiles fail +; [DecibelFix element] # Decibel fixes can be used to work around missing or incorrect dB +; # information from alsa. A decibel fix is a table that maps volume steps +; # to decibel values for one volume element. The "element" part in the +; # section title is the name of the volume element (or name and index +; # separated by a comma). +; # +; # NOTE: This feature is meant just as a help for figuring out the correct +; # decibel values. PulseAudio is not the correct place to maintain the +; # decibel mappings! +; # +; # If you need this feature, then you should make sure that when you have +; # the correct values figured out, the alsa driver developers get informed +; # too, so that they can fix the driver. +; +; db-values = ... # The option value consists of pairs of step numbers and decibel values. +; # The pairs are separated with whitespace, and steps are separated from +; # the corresponding decibel values with a colon. The values must be in an +; # increasing order. Here's an example of a valid string: +; # +; # "0:-40.50 1:-38.70 3:-33.00 11:0" +; # +; # The lowest step imposes a lower limit for hardware volume and the +; # highest step correspondingly imposes a higher limit. That means that +; # that the mixer will never be set outside those values - the rest of the +; # volume scale is done using software volume. +; # +; # As can be seen in the example, you don't need to specify a dB value for +; # each step. The dB values for skipped steps will be linearly interpolated +; # using the nearest steps that are given. + +[General] +auto-profiles = yes + +[Mapping analog-stereo] +device-strings = front:%f +channel-map = left,right +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic +priority = 15 + +# If everything else fails, try to use hw:0 as a stereo device... +[Mapping stereo-fallback] +device-strings = hw:%f +fallback = yes +channel-map = front-left,front-right +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic +priority = 1 + +# ...and if even that fails, try to use hw:0 as a mono device. +[Mapping mono-fallback] +device-strings = hw:%f +fallback = yes +channel-map = mono +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headset-mic +priority = 1 + +[Mapping analog-surround-21] +device-strings = surround21:%f +channel-map = front-left,front-right,lfe +paths-input = analog-input analog-input-linein analog-input-mic +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 13 + +[Mapping analog-surround-40] +device-strings = surround40:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-input = analog-input analog-input-linein analog-input-mic +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 12 + +[Mapping analog-surround-41] +device-strings = surround41:%f +channel-map = front-left,front-right,rear-left,rear-right,lfe +paths-input = analog-input analog-input-linein analog-input-mic +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 13 + +[Mapping analog-surround-50] +device-strings = surround50:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center +paths-input = analog-input analog-input-linein analog-input-mic +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 12 + +[Mapping analog-surround-51] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-input = analog-input analog-input-linein analog-input-mic +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 13 + +[Mapping analog-surround-71] +device-strings = surround71:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +description = Analog Surround 7.1 +paths-input = analog-input analog-input-linein analog-input-mic +paths-output = analog-output analog-output-lineout analog-output-speaker +priority = 12 + +[Mapping iec958-stereo] +device-strings = iec958:%f +channel-map = left,right +paths-input = iec958-stereo-input +paths-output = iec958-stereo-output +priority = 5 + +[Mapping iec958-ac3-surround-40] +device-strings = a52:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-output = iec958-stereo-output +priority = 2 +direction = output + +[Mapping iec958-ac3-surround-51] +device-strings = a52:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = iec958-stereo-output +priority = 3 +direction = output + +[Mapping iec958-dts-surround-51] +device-strings = dca:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = iec958-stereo-output +priority = 3 +direction = output + +[Mapping hdmi-stereo] +description = Digital Stereo (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = left,right +priority = 9 +direction = output + +[Mapping hdmi-surround] +description = Digital Surround 5.1 (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 8 +direction = output + +[Mapping hdmi-surround71] +description = Digital Surround 7.1 (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 8 +direction = output + +[Mapping hdmi-dts-surround] +description = Digital Surround 5.1 (HDMI/DTS) +device-strings = dcahdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra1] +description = Digital Stereo (HDMI 2) +device-strings = hdmi:%f,1 +paths-output = hdmi-output-1 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra1] +description = Digital Surround 5.1 (HDMI 2) +device-strings = hdmi:%f,1 +paths-output = hdmi-output-1 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra1] +description = Digital Surround 7.1 (HDMI 2) +device-strings = hdmi:%f,1 +paths-output = hdmi-output-1 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra1] +description = Digital Surround 5.1 (HDMI 2/DTS) +device-strings = dcahdmi:%f,1 +paths-output = hdmi-output-1 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra2] +description = Digital Stereo (HDMI 3) +device-strings = hdmi:%f,2 +paths-output = hdmi-output-2 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra2] +description = Digital Surround 5.1 (HDMI 3) +device-strings = hdmi:%f,2 +paths-output = hdmi-output-2 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra2] +description = Digital Surround 7.1 (HDMI 3) +device-strings = hdmi:%f,2 +paths-output = hdmi-output-2 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra2] +description = Digital Surround 5.1 (HDMI 3/DTS) +device-strings = dcahdmi:%f,2 +paths-output = hdmi-output-2 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra3] +description = Digital Stereo (HDMI 4) +device-strings = hdmi:%f,3 +paths-output = hdmi-output-3 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra3] +description = Digital Surround 5.1 (HDMI 4) +device-strings = hdmi:%f,3 +paths-output = hdmi-output-3 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra3] +description = Digital Surround 7.1 (HDMI 4) +device-strings = hdmi:%f,3 +paths-output = hdmi-output-3 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra3] +description = Digital Surround 5.1 (HDMI 4/DTS) +device-strings = dcahdmi:%f,3 +paths-output = hdmi-output-3 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra4] +description = Digital Stereo (HDMI 5) +device-strings = hdmi:%f,4 +paths-output = hdmi-output-4 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra4] +description = Digital Surround 5.1 (HDMI 5) +device-strings = hdmi:%f,4 +paths-output = hdmi-output-4 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra4] +description = Digital Surround 7.1 (HDMI 5) +device-strings = hdmi:%f,4 +paths-output = hdmi-output-4 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra4] +description = Digital Surround 5.1 (HDMI 5/DTS) +device-strings = dcahdmi:%f,4 +paths-output = hdmi-output-4 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra5] +description = Digital Stereo (HDMI 6) +device-strings = hdmi:%f,5 +paths-output = hdmi-output-5 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra5] +description = Digital Surround 5.1 (HDMI 6) +device-strings = hdmi:%f,5 +paths-output = hdmi-output-5 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra5] +description = Digital Surround 7.1 (HDMI 6) +device-strings = hdmi:%f,5 +paths-output = hdmi-output-5 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra5] +description = Digital Surround 5.1 (HDMI 6/DTS) +device-strings = dcahdmi:%f,5 +paths-output = hdmi-output-5 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra6] +description = Digital Stereo (HDMI 7) +device-strings = hdmi:%f,6 +paths-output = hdmi-output-6 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra6] +description = Digital Surround 5.1 (HDMI 7) +device-strings = hdmi:%f,6 +paths-output = hdmi-output-6 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra6] +description = Digital Surround 7.1 (HDMI 7) +device-strings = hdmi:%f,6 +paths-output = hdmi-output-6 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra6] +description = Digital Surround 5.1 (HDMI 7/DTS) +device-strings = dcahdmi:%f,6 +paths-output = hdmi-output-6 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra7] +description = Digital Stereo (HDMI 8) +device-strings = hdmi:%f,7 +paths-output = hdmi-output-7 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra7] +description = Digital Surround 5.1 (HDMI 8) +device-strings = hdmi:%f,7 +paths-output = hdmi-output-7 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra7] +description = Digital Surround 7.1 (HDMI 8) +device-strings = hdmi:%f,7 +paths-output = hdmi-output-7 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra7] +description = Digital Surround 5.1 (HDMI 8/DTS) +device-strings = dcahdmi:%f,7 +paths-output = hdmi-output-7 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra8] +description = Digital Stereo (HDMI 9) +device-strings = hdmi:%f,8 +paths-output = hdmi-output-8 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra8] +description = Digital Surround 5.1 (HDMI 9) +device-strings = hdmi:%f,8 +paths-output = hdmi-output-8 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra8] +description = Digital Surround 7.1 (HDMI 9) +device-strings = hdmi:%f,8 +paths-output = hdmi-output-8 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra8] +description = Digital Surround 5.1 (HDMI 9/DTS) +device-strings = dcahdmi:%f,8 +paths-output = hdmi-output-8 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra9] +description = Digital Stereo (HDMI 10) +device-strings = hdmi:%f,9 +paths-output = hdmi-output-9 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra9] +description = Digital Surround 5.1 (HDMI 10) +device-strings = hdmi:%f,9 +paths-output = hdmi-output-9 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra9] +description = Digital Surround 7.1 (HDMI 10) +device-strings = hdmi:%f,9 +paths-output = hdmi-output-9 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra9] +description = Digital Surround 5.1 (HDMI 10/DTS) +device-strings = dcahdmi:%f,9 +paths-output = hdmi-output-9 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-stereo-extra10] +description = Digital Stereo (HDMI 11) +device-strings = hdmi:%f,10 +paths-output = hdmi-output-10 +channel-map = left,right +priority = 7 +direction = output + +[Mapping hdmi-surround-extra10] +description = Digital Surround 5.1 (HDMI 11) +device-strings = hdmi:%f,10 +paths-output = hdmi-output-10 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping hdmi-surround71-extra10] +description = Digital Surround 7.1 (HDMI 11) +device-strings = hdmi:%f,10 +paths-output = hdmi-output-10 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 6 +direction = output + +[Mapping hdmi-dts-surround-extra10] +description = Digital Surround 5.1 (HDMI 11/DTS) +device-strings = dcahdmi:%f,10 +paths-output = hdmi-output-10 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 6 +direction = output + +[Mapping multichannel-output] +device-strings = hw:%f +channel-map = left,right,rear-left,rear-right +exact-channels = false +fallback = yes +priority = 1 +direction = output + +[Mapping multichannel-input] +device-strings = hw:%f +channel-map = left,right,rear-left,rear-right +exact-channels = false +fallback = yes +priority = 1 +direction = input + +; An example for defining multiple-sink profiles +#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo] +#description = Foobar +#output-mappings = analog-stereo iec958-stereo +#input-mappings = analog-stereo diff --git a/spa/plugins/alsa/mixer/profile-sets/dell-dock-tb16-usb-audio.conf b/spa/plugins/alsa/mixer/profile-sets/dell-dock-tb16-usb-audio.conf new file mode 100644 index 0000000..1186552 --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/dell-dock-tb16-usb-audio.conf @@ -0,0 +1,55 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; Dell Dock TB16 USB audio +; +; This card has two stereo pairs of output, One Mono input. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-headphone] +description = Headphone +device-strings = hw:%f,0,0 +channel-map = left,right +direction = output + +[Mapping analog-stereo-speaker] +description = Speaker +device-strings = hw:%f,1,0 +channel-map = left,right +direction = output + +[Mapping analog-stereo-mic] +description = Headset-Mic +device-strings = hw:%f,0,0 +channel-map = left,right +direction = input + + +[Profile output:analog-stereo-speaker] +description = Speaker +output-mappings = analog-stereo-speaker +priority = 60 +skip-probe = yes + +[Profile output:analog-stereo-headphone+input:analog-stereo-mic] +description = Headset +output-mappings = analog-stereo-headphone +input-mappings = analog-stereo-mic +priority = 80 +skip-probe = yes diff --git a/spa/plugins/alsa/mixer/profile-sets/force-speaker-and-int-mic.conf b/spa/plugins/alsa/mixer/profile-sets/force-speaker-and-int-mic.conf new file mode 100644 index 0000000..41924f4 --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/force-speaker-and-int-mic.conf @@ -0,0 +1,153 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; This profile forces speaker and internal mic ports even if we have no way +; of identifying those. +; See default.conf for explanations. + +[General] +auto-profiles = yes + +[Mapping analog-mono] +device-strings = hw:%f +channel-map = mono +paths-output = analog-output analog-output-lineout analog-output-speaker-always analog-output-headphones analog-output-headphones-2 analog-output-mono +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic-always analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line +priority = 1 + +[Mapping analog-stereo] +device-strings = front:%f hw:%f +channel-map = left,right +paths-output = analog-output analog-output-lineout analog-output-speaker-always analog-output-headphones analog-output-headphones-2 analog-output-mono +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic-always analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line +priority = 10 + +[Mapping analog-surround-21] +device-strings = surround21:%f +channel-map = front-left,front-right,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 8 +direction = output + +[Mapping analog-surround-40] +device-strings = surround40:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 7 +direction = output + +[Mapping analog-surround-41] +device-strings = surround41:%f +channel-map = front-left,front-right,rear-left,rear-right,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 8 +direction = output + +[Mapping analog-surround-50] +device-strings = surround50:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 7 +direction = output + +[Mapping analog-surround-51] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 8 +direction = output + +[Mapping analog-surround-71] +device-strings = surround71:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +description = Analog Surround 7.1 +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 7 +direction = output + +[Mapping analog-4-channel-input] +# Alsa doesn't currently provide any better device name than "hw" for 4-channel +# input. If this causes trouble at some point, then we will need to get a new +# device name standardized in alsa. +device-strings = hw:%f +channel-map = aux0,aux1,aux2,aux3 +priority = 1 +direction = input + +[Mapping iec958-stereo] +device-strings = iec958:%f +channel-map = left,right +paths-input = iec958-stereo-input +paths-output = iec958-stereo-output +priority = 5 + +[Mapping iec958-ac3-surround-40] +device-strings = a52:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-output = iec958-stereo-output +priority = 2 +direction = output + +[Mapping iec958-ac3-surround-51] +device-strings = a52:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = iec958-stereo-output +priority = 3 +direction = output + +[Mapping iec958-dts-surround-51] +device-strings = dca:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = iec958-stereo-output +priority = 3 +direction = output + +[Mapping hdmi-stereo] +description = Digital Stereo (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = left,right +priority = 4 +direction = output + +[Mapping hdmi-surround] +description = Digital Surround 5.1 (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 3 +direction = output + +[Mapping hdmi-surround71] +description = Digital Surround 7.1 (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 3 +direction = output + +[Mapping hdmi-dts-surround] +description = Digital Surround 5.1 (HDMI/DTS) +device-strings = dcahdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 1 +direction = output + +; An example for defining multiple-sink profiles +#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo] +#description = Foobar +#output-mappings = analog-stereo iec958-stereo +#input-mappings = analog-stereo diff --git a/spa/plugins/alsa/mixer/profile-sets/force-speaker.conf b/spa/plugins/alsa/mixer/profile-sets/force-speaker.conf new file mode 100644 index 0000000..dec57d5 --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/force-speaker.conf @@ -0,0 +1,152 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; This profile forces a speaker port even if we have no way of identifying it. +; See default.conf for explanations. + +[General] +auto-profiles = yes + +[Mapping analog-mono] +device-strings = hw:%f +channel-map = mono +paths-output = analog-output analog-output-lineout analog-output-speaker-always analog-output-headphones analog-output-headphones-2 analog-output-mono +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line +priority = 1 + +[Mapping analog-stereo] +device-strings = front:%f hw:%f +channel-map = left,right +paths-output = analog-output analog-output-lineout analog-output-speaker-always analog-output-headphones analog-output-headphones-2 analog-output-mono +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line +priority = 10 + +[Mapping analog-surround-21] +device-strings = surround21:%f +channel-map = front-left,front-right,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 8 +direction = output + +[Mapping analog-surround-40] +device-strings = surround40:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 7 +direction = output + +[Mapping analog-surround-41] +device-strings = surround41:%f +channel-map = front-left,front-right,rear-left,rear-right,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 8 +direction = output + +[Mapping analog-surround-50] +device-strings = surround50:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 7 +direction = output + +[Mapping analog-surround-51] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 8 +direction = output + +[Mapping analog-surround-71] +device-strings = surround71:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +description = Analog Surround 7.1 +paths-output = analog-output analog-output-lineout analog-output-speaker-always +priority = 7 +direction = output + +[Mapping analog-4-channel-input] +# Alsa doesn't currently provide any better device name than "hw" for 4-channel +# input. If this causes trouble at some point, then we will need to get a new +# device name standardized in alsa. +device-strings = hw:%f +channel-map = aux0,aux1,aux2,aux3 +priority = 1 +direction = input + +[Mapping iec958-stereo] +device-strings = iec958:%f +channel-map = left,right +paths-input = iec958-stereo-input +paths-output = iec958-stereo-output +priority = 5 + +[Mapping iec958-ac3-surround-40] +device-strings = a52:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-output = iec958-stereo-output +priority = 2 +direction = output + +[Mapping iec958-ac3-surround-51] +device-strings = a52:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = iec958-stereo-output +priority = 3 +direction = output + +[Mapping iec958-dts-surround-51] +device-strings = dca:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = iec958-stereo-output +priority = 3 +direction = output + +[Mapping hdmi-stereo] +description = Digital Stereo (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = left,right +priority = 4 +direction = output + +[Mapping hdmi-surround] +description = Digital Surround 5.1 (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 3 +direction = output + +[Mapping hdmi-surround71] +description = Digital Surround 7.1 (HDMI) +device-strings = hdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +priority = 3 +direction = output + +[Mapping hdmi-dts-surround] +description = Digital Surround 5.1 (HDMI/DTS) +device-strings = dcahdmi:%f +paths-output = hdmi-output-0 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +priority = 1 +direction = output + +; An example for defining multiple-sink profiles +#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo] +#description = Foobar +#output-mappings = analog-stereo iec958-stereo +#input-mappings = analog-stereo diff --git a/spa/plugins/alsa/mixer/profile-sets/hp-tbt-dock-120w-g2.conf b/spa/plugins/alsa/mixer/profile-sets/hp-tbt-dock-120w-g2.conf new file mode 100644 index 0000000..a683a4e --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/hp-tbt-dock-120w-g2.conf @@ -0,0 +1,35 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; HP Thunderbolt Dock 120W G2 +; +; This dock has a 3.5mm headset connector. Both input and output are stereo. +; +; There's a separate speakerphone module called "HP Thunderbolt Dock Audio +; Module", which can be attached to this dock. The module will appear in ALSA +; as a separate USB sound card, configuration for it is in +; hp-tbt-dock-audio-module.conf. + +[General] +auto-profiles = no + +[Mapping analog-stereo-headset] +device-strings = hw:%f,0,0 +channel-map = left,right + +[Profile output:analog-stereo-headset+input:analog-stereo-headset] +output-mappings = analog-stereo-headset +input-mappings = analog-stereo-headset +skip-probe = yes diff --git a/spa/plugins/alsa/mixer/profile-sets/hp-tbt-dock-audio-module.conf b/spa/plugins/alsa/mixer/profile-sets/hp-tbt-dock-audio-module.conf new file mode 100644 index 0000000..692ab8d --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/hp-tbt-dock-audio-module.conf @@ -0,0 +1,36 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; HP Thunderbolt Dock Audio Module +; +; This device attaches to the "HP Thunderbolt Dock 120W G2" dock. The audio +; module provides a speakerphone with echo cancellation and appears in ALSA as +; a USB sound card with stereo input and output. +; +; The dock itself has a 3.5mm headset connector and appears as a separate USB +; sound card, configuration for it is in hp-tbt-dock-120w-g2.conf. + +[General] +auto-profiles = no + +[Mapping analog-stereo-speakerphone] +device-strings = hw:%f,0,0 +channel-map = left,right +intended-roles = phone + +[Profile output:analog-stereo-speakerphone+input:analog-stereo-speakerphone] +output-mappings = analog-stereo-speakerphone +input-mappings = analog-stereo-speakerphone +skip-probe = yes diff --git a/spa/plugins/alsa/mixer/profile-sets/kinect-audio.conf b/spa/plugins/alsa/mixer/profile-sets/kinect-audio.conf new file mode 100644 index 0000000..d51fd17 --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/kinect-audio.conf @@ -0,0 +1,38 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; Audio profile for the Microsoft Kinect Sensor device in UAC mode. +; +; Copyright (C) 2011 Antonio Ospite <ospite@studenti.unina.it> +; +; This device has an array of four microphones, and no playback capability. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping input-4-channels] +device-strings = hw:%f +channel-map = front-left,front-right,rear-left,rear-right +description = 4 Channels Input +direction = input +priority = 5 + +[Profile input:mic-array] +description = Microphone Array +input-mappings = input-4-channels +priority = 2 +skip-probe = yes diff --git a/spa/plugins/alsa/mixer/profile-sets/maudio-fasttrack-pro.conf b/spa/plugins/alsa/mixer/profile-sets/maudio-fasttrack-pro.conf new file mode 100644 index 0000000..5122907 --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/maudio-fasttrack-pro.conf @@ -0,0 +1,86 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; M-Audio FastTrack Pro +; +; This card has one duplex stereo channel called A and an additional +; stereo output channel called B. +; +; We knowingly only define a subset of the theoretically possible +; mapping combinations as profiles here. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-a-output] +description = Analog Stereo Channel A +device-strings = hw:%f,0,0 +channel-map = left,right +direction = output + +; Try both device 0 and device 1 for input, see +; http://mailman.alsa-project.org/pipermail/alsa-devel/2012-March/050701.html +[Mapping analog-stereo-a-input] +description = Analog Stereo Channel A +device-strings = hw:%f,0,0 hw:%f,1,0 +channel-map = left,right +direction = input + +[Mapping analog-stereo-b-output] +description = Analog Stereo Channel B +device-strings = hw:%f,1,0 +channel-map = left,right +direction = output + +[Profile output:analog-stereo-all+input:analog-stereo-all] +description = Analog Stereo Duplex Channel A, Analog Stereo output Channel B +output-mappings = analog-stereo-a-output analog-stereo-b-output +input-mappings = analog-stereo-a-input +priority = 100 +skip-probe = yes + +[Profile output:analog-stereo-a-output+input:analog-stereo-a-input] +description = Analog Stereo Duplex Channel A +output-mappings = analog-stereo-a-output +input-mappings = analog-stereo-a-input +priority = 40 +skip-probe = yes + +[Profile output:analog-stereo-b+input:analog-stereo-b] +description = Analog Stereo Output Channel B +output-mappings = analog-stereo-b-output +input-mappings = +priority = 50 +skip-probe = yes + +[Profile output:analog-stereo-a] +description = Analog Stereo Output Channel A +output-mappings = analog-stereo-a-output +priority = 5 +skip-probe = yes + +[Profile output:analog-stereo-b] +description = Analog Stereo Output Channel B +output-mappings = analog-stereo-b-output +priority = 6 +skip-probe = yes + +[Profile input:analog-stereo-a] +description = Analog Stereo Input Channel A +input-mappings = analog-stereo-a-input +priority = 2 +skip-probe = yes diff --git a/spa/plugins/alsa/mixer/profile-sets/native-instruments-audio4dj.conf b/spa/plugins/alsa/mixer/profile-sets/native-instruments-audio4dj.conf new file mode 100644 index 0000000..f7cbc15 --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/native-instruments-audio4dj.conf @@ -0,0 +1,90 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; Native Instruments Audio 4 DJ +; +; This card has two stereo pairs of input and two stereo pairs of +; output, named channels A and B. Channel B has an additional +; Headphone connector. +; +; We knowingly only define a subset of the theoretically possible +; mapping combinations as profiles here. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-a] +description = Analog Stereo Channel A +device-strings = hw:%f,0,0 +channel-map = left,right + +[Mapping analog-stereo-b-output] +description = Analog Stereo Channel B (Headphones) +device-strings = hw:%f,0,1 +channel-map = left,right +direction = output + +[Mapping analog-stereo-b-input] +description = Analog Stereo Channel B +device-strings = hw:%f,0,1 +channel-map = left,right +direction = input + +[Profile output:analog-stereo-all+input:analog-stereo-all] +description = Analog Stereo Duplex Channels A, B (Headphones) +output-mappings = analog-stereo-a analog-stereo-b-output +input-mappings = analog-stereo-a analog-stereo-b-input +priority = 100 +skip-probe = yes + +[Profile output:analog-stereo-a+input:analog-stereo-a] +description = Analog Stereo Duplex Channel A +output-mappings = analog-stereo-a +input-mappings = analog-stereo-a +priority = 40 +skip-probe = yes + +[Profile output:analog-stereo-b+input:analog-stereo-b] +description = Analog Stereo Duplex Channel B (Headphones) +output-mappings = analog-stereo-b-output +input-mappings = analog-stereo-b-input +priority = 50 +skip-probe = yes + +[Profile output:analog-stereo-a] +description = Analog Stereo Output Channel A +output-mappings = analog-stereo-a +priority = 5 +skip-probe = yes + +[Profile output:analog-stereo-b] +description = Analog Stereo Output Channel B (Headphones) +output-mappings = analog-stereo-b-output +priority = 6 +skip-probe = yes + +[Profile input:analog-stereo-a] +description = Analog Stereo Input Channel A +input-mappings = analog-stereo-a +priority = 2 +skip-probe = yes + +[Profile input:analog-stereo-b] +description = Analog Stereo Input Channel B +input-mappings = analog-stereo-b-input +priority = 1 +skip-probe = yes diff --git a/spa/plugins/alsa/mixer/profile-sets/native-instruments-audio8dj.conf b/spa/plugins/alsa/mixer/profile-sets/native-instruments-audio8dj.conf new file mode 100644 index 0000000..dc1b780 --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/native-instruments-audio8dj.conf @@ -0,0 +1,161 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; Native Instruments Audio 8 DJ +; +; This card has four stereo pairs of input and four stereo pairs of +; output, named channels A to D. Channel C has an additional Mic/Line +; connector, channel D an additional Headphone connector. +; +; We knowingly only define a subset of the theoretically possible +; mapping combinations as profiles here. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-a] +description = Analog Stereo Channel A +device-strings = hw:%f,0,0 +channel-map = left,right + +[Mapping analog-stereo-b] +description = Analog Stereo Channel B +device-strings = hw:%f,0,1 +channel-map = left,right + +# Since we want to set a different description for channel C's/D's input +# and output we define two separate mappings for them +[Mapping analog-stereo-c-output] +description = Analog Stereo Channel C +device-strings = hw:%f,0,2 +channel-map = left,right +direction = output + +[Mapping analog-stereo-c-input] +description = Analog Stereo Channel C (Line/Mic) +device-strings = hw:%f,0,2 +channel-map = left,right +direction = input + +[Mapping analog-stereo-d-output] +description = Analog Stereo Channel D (Headphones) +device-strings = hw:%f,0,3 +channel-map = left,right +direction = output + +[Mapping analog-stereo-d-input] +description = Analog Stereo Channel D +device-strings = hw:%f,0,3 +channel-map = left,right +direction = input + +[Profile output:analog-stereo-all+input:analog-stereo-all] +description = Analog Stereo Duplex Channels A, B, C (Line/Mic), D (Headphones) +output-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-output analog-stereo-d-output +input-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-input analog-stereo-d-input +priority = 100 +skip-probe = yes + +[Profile output:analog-stereo-d+input:analog-stereo-c] +description = Analog Stereo Channel D (Headphones) Output, Channel C (Line/Mic) Input +output-mappings = analog-stereo-d-output +input-mappings = analog-stereo-c-input +priority = 90 +skip-probe = yes + +[Profile output:analog-stereo-c-d+input:analog-stereo-c-d] +description = Analog Stereo Duplex Channels C (Line/Mic), D (Line/Mic) +output-mappings = analog-stereo-c-output analog-stereo-d-output +input-mappings = analog-stereo-c-input analog-stereo-d-input +priority = 80 +skip-probe = yes + +[Profile output:analog-stereo-a+input:analog-stereo-a] +description = Analog Stereo Duplex Channel A +output-mappings = analog-stereo-a +input-mappings = analog-stereo-a +priority = 50 +skip-probe = yes + +[Profile output:analog-stereo-b+input:analog-stereo-b] +description = Analog Stereo Duplex Channel B +output-mappings = analog-stereo-b +input-mappings = analog-stereo-b +priority = 40 +skip-probe = yes + +[Profile output:analog-stereo-c+input:analog-stereo-c] +description = Analog Stereo Duplex Channel C (Line/Mic) +output-mappings = analog-stereo-c-output +input-mappings = analog-stereo-c-input +priority = 60 +skip-probe = yes + +[Profile output:analog-stereo-d+input:analog-stereo-d] +description = Analog Stereo Duplex Channel D (Headphones) +output-mappings = analog-stereo-d-output +input-mappings = analog-stereo-d-input +priority = 70 +skip-probe = yes + +[Profile output:analog-stereo-a] +description = Analog Stereo Output Channel A +output-mappings = analog-stereo-a +priority = 6 +skip-probe = yes + +[Profile output:analog-stereo-b] +description = Analog Stereo Output Channel B +output-mappings = analog-stereo-b +priority = 5 +skip-probe = yes + +[Profile output:analog-stereo-c] +description = Analog Stereo Output Channel C +output-mappings = analog-stereo-c-output +priority = 7 +skip-probe = yes + +[Profile output:analog-stereo-d] +description = Analog Stereo Output Channel D (Headphones) +output-mappings = analog-stereo-d-output +priority = 8 +skip-probe = yes + +[Profile input:analog-stereo-a] +description = Analog Stereo Input Channel A +input-mappings = analog-stereo-a +priority = 2 +skip-probe = yes + +[Profile input:analog-stereo-b] +description = Analog Stereo Input Channel B +input-mappings = analog-stereo-b +priority = 1 +skip-probe = yes + +[Profile input:analog-stereo-c] +description = Analog Stereo Input Channel C (Line/Mic) +input-mappings = analog-stereo-c-input +priority = 4 +skip-probe = yes + +[Profile input:analog-stereo-d] +description = Analog Stereo Input Channel D +input-mappings = analog-stereo-d-input +priority = 3 +skip-probe = yes diff --git a/spa/plugins/alsa/mixer/profile-sets/native-instruments-komplete-audio6.conf b/spa/plugins/alsa/mixer/profile-sets/native-instruments-komplete-audio6.conf new file mode 100644 index 0000000..60db1dd --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/native-instruments-komplete-audio6.conf @@ -0,0 +1,110 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; Native Instruments Komplete Audio 6 +; +; This card has three stereo pairs of input and three stereo pairs of +; output. +; +; We knowingly only define a subset of the theoretically possible +; mapping combinations as profiles here. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-out-ab] +description = Analog Stereo 1/2 +device-strings = hw:%f,0,0 +channel-map = left,right,aux0,aux1,aux2,aux3 +direction = output + +[Mapping analog-stereo-out-cd] +description = Analog Stereo 3/4 +device-strings = hw:%f,0,0 +channel-map = aux0,aux1,left,right,aux2,aux3 +direction = output + +[Mapping stereo-out-ef] +description = Stereo 5/6 (S/PDIF) +device-strings = hw:%f,0,0 +channel-map = aux0,aux1,aux2,aux3,left,right +direction = output + +[Mapping analog-mono-in-a] +description = Analog Mono Input 1 +device-strings = hw:%f,0,0 +channel-map = mono,aux0,aux1,aux2,aux3,aux4 +direction = input + +[Mapping analog-mono-in-b] +description = Analog Mono Input 2 +device-strings = hw:%f,0,0 +channel-map = aux0,mono,aux1,aux2,aux3,aux4 +direction = input + +[Mapping analog-stereo-in-ab] +description = Analog Stereo Input 1/2 +device-strings = hw:%f,0,0 +channel-map = left,right,aux0,aux1,aux2,aux3 +direction = input + +[Mapping analog-stereo-in-cd] +description = Analog Stereo Input 3/4 +device-strings = hw:%f,0,0 +channel-map = aux0,aux1,left,right,aux2,aux3 +direction = input + +[Mapping stereo-in-ef] +description = Stereo Input 5/6 (S/PDIF) +device-strings = hw:%f,0,0 +channel-map = aux0,aux1,aux2,aux3,left,right +direction = input + +[Profile output:analog-stereo-out-ab+input:analog-stereo-in-ab] +description = Analog Stereo Output 1/2, Analog Stereo Input 1/2 +output-mappings = analog-stereo-out-ab +input-mappings = analog-stereo-in-ab +priority = 100 +skip-probe = yes + +[Profile output:analog-stereo-out-ab+input:analog-mono-in-a] +description = Analog Stereo Output 1/2, Analog Mono Input 1 +output-mappings = analog-stereo-out-ab +input-mappings = analog-mono-in-a +priority = 95 +skip-probe = yes + +[Profile output:analog-stereo-out-ab+input:analog-mono-in-b] +description = Analog Stereo Output 1/2, Analog Mono Input 2 +output-mappings = analog-stereo-out-ab +input-mappings = analog-mono-in-b +priority = 90 +skip-probe = yes + +[Profile output:analog-stereo-out-cd+input:analog-stereo-in-cd] +description = Analog Stereo Output 3/4, Analog Stereo Input 3/4 +output-mappings = analog-stereo-out-cd +input-mappings = analog-stereo-in-cd +priority = 80 +skip-probe = yes + +[Profile output:stereo-out-ef+input:stereo-in-ef] +description = Stereo Output 5/6 (S/PDIF), Stereo Input 5/6 (S/PDIF) +output-mappings = stereo-out-ef +input-mappings = stereo-in-ef +priority = 70 +skip-probe = yes diff --git a/spa/plugins/alsa/mixer/profile-sets/native-instruments-korecontroller.conf b/spa/plugins/alsa/mixer/profile-sets/native-instruments-korecontroller.conf new file mode 100644 index 0000000..35b3d06 --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/native-instruments-korecontroller.conf @@ -0,0 +1,84 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; Native Instruments Kore Controller +; +; This card has one stereo pairs of input and two stereo pairs of +; output, named "Master" and "Headphone". The master channel has +; an additional Coax S/PDIF connector which is always on. +; +; We knowingly only define a subset of the theoretically possible +; mapping combinations as profiles here. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-master-out] +description = Analog Stereo Master Channel +device-strings = hw:%f,0,0 +channel-map = left,right + +[Mapping analog-stereo-headphone-out] +description = Analog Stereo Headphone Channel +device-strings = hw:%f,0,1 +channel-map = left,right +direction = output + +[Mapping analog-stereo-input] +description = Analog Stereo +device-strings = hw:%f,0,0 +channel-map = left,right +direction = input + +[Profile output:analog-stereo-all+input:analog-stereo-all] +description = Analog Stereo Duplex Master Output, Headphones Output +output-mappings = analog-stereo-master-out analog-stereo-headphone-out +input-mappings = analog-stereo-input +priority = 100 +skip-probe = yes + +[Profile output:analog-stereo-master+input:analog-stereo-input] +description = Analog Stereo Duplex Master Output +output-mappings = analog-stereo-master-out +input-mappings = analog-stereo-input +priority = 40 +skip-probe = yes + +[Profile output:analog-stereo-headphone-out+input:analog-stereo-input] +description = Analog Stereo Headphones Output +output-mappings = analog-stereo-headphone-out +input-mappings = analog-stereo-input +priority = 30 +skip-probe = yes + +[Profile output:analog-stereo-master] +description = Analog Stereo Master Output +output-mappings = analog-stereo-master-out +priority = 3 +skip-probe = yes + +[Profile output:analog-stereo-headphone] +description = Analog Stereo Headphones Output +output-mappings = analog-stereo-headphone-out +priority = 2 +skip-probe = yes + +[Profile input:analog-stereo-input] +description = Analog Stereo Input +input-mappings = analog-stereo-input +priority = 1 +skip-probe = yes diff --git a/spa/plugins/alsa/mixer/profile-sets/native-instruments-traktor-audio10.conf b/spa/plugins/alsa/mixer/profile-sets/native-instruments-traktor-audio10.conf new file mode 100644 index 0000000..c210297 --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/native-instruments-traktor-audio10.conf @@ -0,0 +1,130 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; Native Instruments Audio 10 DJ +; +; This card has five stereo pairs of input and five stereo pairs of +; output +; +; We knowingly only define a subset of the theoretically possible +; mapping combinations as profiles here. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-out-main] +description = Analog Stereo Main +device-strings = hw:%f,0,0 +channel-map = left,right + +[Mapping analog-stereo-out-a] +description = Analog Stereo Channel A +device-strings = hw:%f,0,1 +channel-map = left,right +direction = output + +[Mapping analog-stereo-out-b] +description = Analog Stereo Channel B +device-strings = hw:%f,0,1 +channel-map = left,right +direction = output + +[Mapping analog-stereo-out-c] +description = Analog Stereo Channel C +device-strings = hw:%f,0,2 +channel-map = left,right +direction = output + +[Mapping analog-stereo-out-d] +description = Analog Stereo Channel D +device-strings = hw:%f,0,3 +channel-map = left,right +direction = output + +[Mapping analog-stereo-in-main] +description = Analog Stereo Main +device-strings = hw:%f,0,0 +channel-map = left,right + +[Mapping analog-stereo-in-a] +description = Analog Stereo Channel A +device-strings = hw:%f,0,1 +channel-map = left,right +direction = input + +[Mapping analog-stereo-in-b] +description = Analog Stereo Channel B +device-strings = hw:%f,0,1 +channel-map = left,right +direction = input + +[Mapping analog-stereo-in-c] +description = Analog Stereo Channel C +device-strings = hw:%f,0,2 +channel-map = left,right +direction = input + +[Mapping analog-stereo-in-d] +description = Analog Stereo Channel D +device-strings = hw:%f,0,3 +channel-map = left,right +direction = input + + + + +[Profile output:analog-stereo-all+input:analog-stereo-all] +description = Analog Stereo Duplex Channels Main, A, B, C, D +output-mappings = analog-stereo-out-main analog-stereo-out-a analog-stereo-out-b analog-stereo-out-c analog-stereo-out-d +input-mappings = analog-stereo-in-main analog-stereo-in-a analog-stereo-in-b analog-stereo-in-c analog-stereo-in-d +priority = 100 +skip-probe = yes + +[Profile output:analog-stereo-main+input:analog-stereo-main] +description = Analog Stereo Duplex Main +output-mappings = analog-stereo-out-main +input-mappings = analog-stereo-in-main +priority = 50 +skip-probe = yes + +[Profile output:analog-stereo-a+input:analog-stereo-a] +description = Analog Stereo Duplex Channel A +output-mappings = analog-stereo-out-a +input-mappings = analog-stereo-in-a +priority = 40 +skip-probe = yes + +[Profile output:analog-stereo-b+input:analog-stereo-b] +description = Analog Stereo Duplex Channel B +output-mappings = analog-stereo-out-b +input-mappings = analog-stereo-in-b +priority = 30 +skip-probe = yes + +[Profile output:analog-stereo-a+input:analog-stereo-c] +description = Analog Stereo Duplex Channel C +output-mappings = analog-stereo-out-c +input-mappings = analog-stereo-in-c +priority = 20 +skip-probe = yes + +[Profile output:analog-stereo-a+input:analog-stereo-d] +description = Analog Stereo Duplex Channel D +output-mappings = analog-stereo-out-d +input-mappings = analog-stereo-in-d +priority = 10 +skip-probe = yes diff --git a/spa/plugins/alsa/mixer/profile-sets/native-instruments-traktor-audio2.conf b/spa/plugins/alsa/mixer/profile-sets/native-instruments-traktor-audio2.conf new file mode 100644 index 0000000..145dace --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/native-instruments-traktor-audio2.conf @@ -0,0 +1,53 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; Native Instruments Traktor Audio 2 +; +; This card has two stereo pairs of output. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-a] +description = Analog Stereo Channel A +device-strings = hw:%f,0,0 +channel-map = left,right +direction = output + +[Mapping analog-stereo-b] +description = Analog Stereo Channel B +device-strings = hw:%f,0,1 +channel-map = left,right +direction = output + +[Profile output:analog-stereo-a] +description = Analog Stereo Output Channel A +output-mappings = analog-stereo-a +priority = 60 +skip-probe = yes + +[Profile output:analog-stereo-b] +description = Analog Stereo Output Channel B +output-mappings = analog-stereo-b +priority = 50 +skip-probe = yes + +[Profile analog-stereo-all] +description = Analog Stereo Output Channels A & B +output-mappings = analog-stereo-a analog-stereo-b +priority = 100 +skip-probe = yes diff --git a/spa/plugins/alsa/mixer/profile-sets/native-instruments-traktor-audio6.conf b/spa/plugins/alsa/mixer/profile-sets/native-instruments-traktor-audio6.conf new file mode 100644 index 0000000..a08e9fc --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/native-instruments-traktor-audio6.conf @@ -0,0 +1,91 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; Native Instruments Audio 6 DJ +; +; This card has three stereo pairs of input and three stereo pairs of +; output +; +; We knowingly only define a subset of the theoretically possible +; mapping combinations as profiles here. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-out-main] +description = Analog Stereo Main +device-strings = hw:%f,0,0 +channel-map = left,right + +[Mapping analog-stereo-out-a] +description = Analog Stereo Channel A +device-strings = hw:%f,0,1 +channel-map = left,right +direction = output + +[Mapping analog-stereo-out-b] +description = Analog Stereo Channel B +device-strings = hw:%f,0,1 +channel-map = left,right +direction = output + +[Mapping analog-stereo-in-main] +description = Analog Stereo Main +device-strings = hw:%f,0,0 +channel-map = left,right + +[Mapping analog-stereo-in-a] +description = Analog Stereo Channel A +device-strings = hw:%f,0,1 +channel-map = left,right +direction = input + +[Mapping analog-stereo-in-b] +description = Analog Stereo Channel B +device-strings = hw:%f,0,1 +channel-map = left,right +direction = input + + + +[Profile output:analog-stereo-all+input:analog-stereo-all] +description = Analog Stereo Duplex Channels A, B (Headphones) +output-mappings = analog-stereo-out-main analog-stereo-out-a analog-stereo-out-b +input-mappings = analog-stereo-in-main analog-stereo-in-a analog-stereo-in-b +priority = 100 +skip-probe = yes + +[Profile output:analog-stereo-main+input:analog-stereo-main] +description = Analog Stereo Duplex Channel Main +output-mappings = analog-stereo-out-main +input-mappings = analog-stereo-in-main +priority = 50 +skip-probe = yes + +[Profile output:analog-stereo-a+input:analog-stereo-a] +description = Analog Stereo Duplex Channel A +output-mappings = analog-stereo-out-a +input-mappings = analog-stereo-in-a +priority = 40 +skip-probe = yes + +[Profile output:analog-stereo-b+input:analog-stereo-b] +description = Analog Stereo Duplex Channel B +output-mappings = analog-stereo-out-b +input-mappings = analog-stereo-in-b +priority = 30 +skip-probe = yes diff --git a/spa/plugins/alsa/mixer/profile-sets/native-instruments-traktorkontrol-s4.conf b/spa/plugins/alsa/mixer/profile-sets/native-instruments-traktorkontrol-s4.conf new file mode 100644 index 0000000..934965f --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/native-instruments-traktorkontrol-s4.conf @@ -0,0 +1,80 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; Native Instruments Traktor Kontrol S4 +; +; This controller has two stereo pairs of input (named "Channel C" and +; "Channel D") and two stereo pairs of output, one "Main Out" and +; "Headphone Out". +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-output-main] +description = Analog Stereo Main Out +device-strings = hw:%f,0,0 +channel-map = left,right + +[Mapping analog-stereo-output-headphone] +description = Analog Stereo Headphones Out +device-strings = hw:%f,0,1 +channel-map = left,right +direction = output + +[Mapping analog-stereo-c-input] +description = Analog Stereo Channel C +device-strings = hw:%f,0,1 +channel-map = left,right +direction = input + +[Mapping analog-stereo-d-input] +description = Analog Stereo Channel D +device-strings = hw:%f,0,1 +channel-map = left,right +direction = input + +[Profile output:analog-stereo-all+input:analog-stereo-all] +description = Analog Stereo Duplex +output-mappings = analog-stereo-output-main analog-stereo-output-headphone +input-mappings = analog-stereo-c-input analog-stereo-d-input +priority = 100 +skip-probe = yes + +[Profile output:analog-stereo-main] +description = Analog Stereo Main Output +output-mappings = analog-stereo-output-main +priority = 4 +skip-probe = yes + +[Profile output:analog-stereo-headphone] +description = Analog Stereo Output Headphones Out +output-mappings = analog-stereo-output-headphone +priority = 3 +skip-probe = yes + +[Profile input:analog-stereo-c] +description = Analog Stereo Input Channel C +input-mappings = analog-stereo-c-input +priority = 2 +skip-probe = yes + +[Profile input:analog-stereo-d] +description = Analog Stereo Input Channel D +input-mappings = analog-stereo-d-input +priority = 1 +skip-probe = yes + diff --git a/spa/plugins/alsa/mixer/profile-sets/sb-omni-surround-5.1.conf b/spa/plugins/alsa/mixer/profile-sets/sb-omni-surround-5.1.conf new file mode 100644 index 0000000..d5d1d65 --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/sb-omni-surround-5.1.conf @@ -0,0 +1,112 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; Creative Sound Blaster Omni Surround 5.1 +; +; This config supports Linux 4.3-rc1+. +; By default there are some non-existing (physically) inputs and outputs that +; are not present in this config. +; Also in addition to natively supported modes (such as stereo, 5.1 and stereo +; S/PDIF) following useful output modes are added: 2.1, 4.0, 4.1 and 5.0. +; +; NOTE: in 2.1 and 4.1 physical LFE output will be different than in 5.1 mode. +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-stereo-input] +device-strings = hw:%f +channel-map = left,right +paths-input = analog-input-mic analog-input-linein +direction = input + +[Mapping analog-stereo-output] +device-strings = front:%f +channel-map = left,right +paths-output = analog-output +direction = output + +[Mapping analog-surround-21] +device-strings = surround51:%f +channel-map = front-left,front-right,aux1,aux2,aux3,lfe +paths-output = analog-output +direction = output + +[Mapping analog-surround-40] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right +paths-output = analog-output +direction = output + +[Mapping analog-surround-41] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right,aux1,lfe +paths-output = analog-output +direction = output + +[Mapping analog-surround-50] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center +paths-output = analog-output +direction = output + +[Mapping analog-surround-51] +device-strings = surround51:%f +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe +paths-output = analog-output +direction = output + +[Mapping iec958-stereo] +device-strings = iec958:%f +channel-map = left,right +paths-output = iec958-stereo-output +direction = output + +[Profile output:analog-stereo-output+input:analog-stereo-input] +output-mappings = analog-stereo-output +input-mappings = analog-stereo-input +priority = 7 + +[Profile output:analog-surround-21+input:analog-stereo-input] +output-mappings = analog-surround-21 +input-mappings = analog-stereo-input +priority = 6 + +[Profile output:analog-surround-40+input:analog-stereo-input] +output-mappings = analog-surround-40 +input-mappings = analog-stereo-input +priority = 5 + +[Profile output:analog-surround-41+input:analog-stereo-input] +output-mappings = analog-surround-41 +input-mappings = analog-stereo-input +priority = 4 + +[Profile output:analog-surround-50+input:analog-stereo-input] +output-mappings = analog-surround-50 +input-mappings = analog-stereo-input +priority = 3 + +[Profile output:analog-surround-51+input:analog-stereo-input] +output-mappings = analog-surround-51 +input-mappings = analog-stereo-input +priority = 2 + +[Profile output:iec958-stereo+input:analog-stereo-input] +output-mappings = iec958-stereo +input-mappings = analog-stereo-input +priority = 1 diff --git a/spa/plugins/alsa/mixer/profile-sets/sennheiser-gsx.conf b/spa/plugins/alsa/mixer/profile-sets/sennheiser-gsx.conf new file mode 100644 index 0000000..0ac1576 --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/sennheiser-gsx.conf @@ -0,0 +1,58 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; USB Gaming DAC. +; These devices have two output devices. The first one is mono, meant for +; voice audio, and the second one is 7.1 surround, meant for everything +; else. The 7.1 surround is mapped to headphones within the device. +; The purpose of the mono/7.1 design is to provide separate volume +; controls for voice and other audio, which can be useful in gaming. +; +; Works with: +; Sennheiser GSX 1000 +; Sennheiser GSX 1200 +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = no + +[Mapping analog-chat-output] +device-strings = hw:%f,0 +channel-map = mono +paths-output = analog-chat-output +direction = output +priority = 4000 +intended-roles = phone + +[Mapping analog-output-surround71] +device-strings = hw:%f,1 +channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right +paths-output = virtual-surround-7.1 +priority = 4100 +direction = output + +[Mapping analog-chat-input] +device-strings = hw:%f,0 +channel-map = mono +paths-input = analog-chat-input +priority = 4100 +direction = input + +[Profile output:analog-output-surround71+output:analog-output-chat+input:analog-input] +output-mappings = analog-output-surround71 analog-chat-output +input-mappings = analog-chat-input +priority = 5100 +skip-probe = yes diff --git a/spa/plugins/alsa/mixer/profile-sets/simple-headphones-mic.conf b/spa/plugins/alsa/mixer/profile-sets/simple-headphones-mic.conf new file mode 100644 index 0000000..809d015 --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/simple-headphones-mic.conf @@ -0,0 +1,42 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; This is a profile meant for simple (stereo + mic) headphones. +; default.conf also works but using this one will hide some profiles +; that don't make sense like IEC958 and multichannel inputs. + +[General] +auto-profiles = yes + +[Mapping analog-stereo] +device-strings = front:%f +channel-map = left,right +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic +priority = 15 + +# If everything else fails, try to use hw:0 as a stereo device... +[Mapping stereo-fallback] +device-strings = hw:%f +fallback = yes +channel-map = front-left,front-right +paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 +paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic +priority = 1 + +[Mapping analog-mono] +device-strings = hw:%f,0,0 +channel-map = mono +direction = input diff --git a/spa/plugins/alsa/mixer/profile-sets/steelseries-arctis-common-usb-audio.conf b/spa/plugins/alsa/mixer/profile-sets/steelseries-arctis-common-usb-audio.conf new file mode 100644 index 0000000..0c58917 --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/steelseries-arctis-common-usb-audio.conf @@ -0,0 +1,23 @@ +[General] +auto-profiles = yes + +[Mapping analog-chat] +description-key = gaming-headset-chat +device-strings = hw:%f,0,0 +channel-map = left,right +paths-input = analog-input-mic +paths-output = steelseries-arctis-output-chat-common +intended-roles = phone + +[Mapping analog-game] +description-key = gaming-headset-game +device-strings = hw:%f,1,0 +channel-map = left,right +paths-output = steelseries-arctis-output-game-common +direction = output + +[Profile output:analog-chat+output:analog-game+input:analog-chat] +output-mappings = analog-chat analog-game +input-mappings = analog-chat +priority = 5100 +skip-probe = yes diff --git a/spa/plugins/alsa/mixer/profile-sets/texas-instruments-pcm2902.conf b/spa/plugins/alsa/mixer/profile-sets/texas-instruments-pcm2902.conf new file mode 100644 index 0000000..3c2b398 --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/texas-instruments-pcm2902.conf @@ -0,0 +1,75 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; Texas Instruments PCM2902 +; +; This is a generic chip used in multiple products, including at least +; Behringer U-Phoria UMC22, Behringer Xenyx 302USB, Intopic Jazz-UB700 and +; some unbranded "usb mini microphone". +; +; Behringer UMC22 has stereo input (representing two physical mono inputs), +; others have mono input. +; +; Some devices have a mic input path, but at least Behringer Xenyx 302USB +; doesn't have any input mixer controls. +; +; Since the UMC22 card has only stereo input PCM device but is commonly used +; with mono mics, we define special mono mappings using "mono,aux1" and +; "aux1,mono" channel maps. If we had only had the standard stereo input +; mapping, the user would have to record stereo tracks with one channel silent, +; which would be inconvenient. +; +; This config also removes default digital input/output mappings that do +; not physically exist on cards that we've seen so far. +; +; Originally added by Nazar Mokrynskyi <nazar@mokrynskyi.com> for Behringer +; UMC22. + +[General] +auto-profiles = yes + +[Mapping analog-stereo-input] +device-strings = hw:%f +channel-map = left,right +paths-input = analog-input-mic analog-input +direction = input +priority = 4 + +[Mapping analog-mono] +device-strings = hw:%f +channel-map = mono +paths-input = analog-input-mic analog-input +direction = input +priority = 3 + +[Mapping analog-mono-left] +device-strings = hw:%f +channel-map = mono,aux1 +paths-input = analog-input-mic analog-input +direction = input +priority = 2 + +[Mapping analog-mono-right] +device-strings = hw:%f +channel-map = aux1,mono +paths-input = analog-input-mic analog-input +direction = input +priority = 1 + +[Mapping analog-stereo-output] +device-strings = front:%f +channel-map = left,right +paths-output = analog-output +direction = output diff --git a/spa/plugins/alsa/mixer/profile-sets/usb-gaming-headset.conf b/spa/plugins/alsa/mixer/profile-sets/usb-gaming-headset.conf new file mode 100644 index 0000000..adda54d --- /dev/null +++ b/spa/plugins/alsa/mixer/profile-sets/usb-gaming-headset.conf @@ -0,0 +1,64 @@ +# This file is part of PulseAudio. +# +# PulseAudio is free software; you can redistribute it and/or modify +# it under the terms of the GNU Lesser General Public License as +# published by the Free Software Foundation; either version 2.1 of the +# License, or (at your option) any later version. +# +# PulseAudio is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. + +; USB gaming headset. +; These headsets usually have two output devices. The first one is meant +; for voice audio, and the second one is meant for everything else. +; The purpose of this unusual design is to provide separate volume +; controls for voice and other audio, which can be useful in gaming. +; +; Works with: +; Steelseries Arctis 7 +; Steelseries Arctis Pro Wireless. +; Lucidsound LS31 +; Astro A50 +; +; See default.conf for an explanation on the directives used here. + +[General] +auto-profiles = yes + +[Mapping mono-chat] +description-key = gaming-headset-chat +device-strings = hw:%f,0,0 +channel-map = mono +paths-output = usb-gaming-headset-output-mono +paths-input = usb-gaming-headset-input +intended-roles = phone + +[Mapping stereo-chat] +description-key = gaming-headset-chat +device-strings = hw:%f,0,0 +channel-map = left,right +paths-output = usb-gaming-headset-output-stereo +paths-input = usb-gaming-headset-input +intended-roles = phone + +[Mapping stereo-game] +description-key = gaming-headset-game +device-strings = hw:%f,1,0 +channel-map = left,right +paths-output = usb-gaming-headset-output-stereo +direction = output + +[Profile output:mono-chat+output:stereo-game+input:mono-chat] +output-mappings = mono-chat stereo-game +input-mappings = mono-chat +priority = 5100 + +[Profile output:stereo-game+output:stereo-chat+input:mono-chat] +output-mappings = stereo-game stereo-chat +input-mappings = mono-chat +priority = 5100 |