diff options
Diffstat (limited to '')
| -rw-r--r-- | src/daemon/minimal.conf.in | 352 |
1 files changed, 352 insertions, 0 deletions
diff --git a/src/daemon/minimal.conf.in b/src/daemon/minimal.conf.in new file mode 100644 index 0000000..4a3a2cb --- /dev/null +++ b/src/daemon/minimal.conf.in @@ -0,0 +1,352 @@ +# Simple daemon config file for PipeWire version @VERSION@ # +# +# Copy and edit this file in @PIPEWIRE_CONFIG_DIR@ for system-wide changes +# or in ~/.config/pipewire for local changes. +# +# It is also possible to place a file with an updated section in +# @PIPEWIRE_CONFIG_DIR@/minimal.conf.d/ for system-wide changes or in +# ~/.config/pipewire/minimal.conf.d/ for local changes. +# + +context.properties = { + ## Configure properties in the system. + #library.name.system = support/libspa-support + #context.data-loop.library.name.system = support/libspa-support + #support.dbus = true + #link.max-buffers = 64 + link.max-buffers = 16 # version < 3 clients can't handle more + #mem.warn-mlock = false + #mem.allow-mlock = true + #mem.mlock-all = false + #clock.power-of-two-quantum = true + #log.level = 2 + #cpu.zero.denormals = false + + core.daemon = true # listening for socket connections + core.name = pipewire-0 # core name and socket name + + ## Properties for the DSP configuration. + #default.clock.rate = 48000 + #default.clock.allowed-rates = [ 48000 ] + #default.clock.quantum = 1024 + #default.clock.min-quantum = 32 + #default.clock.max-quantum = 2048 + #default.clock.quantum-limit = 8192 + #default.video.width = 640 + #default.video.height = 480 + #default.video.rate.num = 25 + #default.video.rate.denom = 1 + # + settings.check-quantum = true + settings.check-rate = true + # + # These overrides are only applied when running in a vm. + vm.overrides = { + default.clock.min-quantum = 1024 + } +} + +context.spa-libs = { + #<factory-name regex> = <library-name> + # + # Used to find spa factory names. It maps an spa factory name + # regular expression to a library name that should contain + # that factory. + # + audio.convert.* = audioconvert/libspa-audioconvert + api.alsa.* = alsa/libspa-alsa + support.* = support/libspa-support +} + +context.modules = [ + #{ name = <module-name> + # [ args = { <key> = <value> ... } ] + # [ flags = [ [ ifexists ] [ nofail ] ] + #} + # + # Loads a module with the given parameters. + # If ifexists is given, the module is ignored when it is not found. + # If nofail is given, module initialization failures are ignored. + # + + # Uses realtime scheduling to boost the audio thread priorities. This uses + # RTKit if the user doesn't have permission to use regular realtime + # scheduling. + { name = libpipewire-module-rt + args = { + nice.level = -11 + #rt.prio = 88 + #rt.time.soft = -1 + #rt.time.hard = -1 + } + flags = [ ifexists nofail ] + } + + # The native communication protocol. + { name = libpipewire-module-protocol-native } + + # The profile module. Allows application to access profiler + # and performance data. It provides an interface that is used + # by pw-top and pw-profiler. + { name = libpipewire-module-profiler } + + # Allows applications to create metadata objects. It creates + # a factory for Metadata objects. + { name = libpipewire-module-metadata } + + # Creates a factory for making nodes that run in the + # context of the PipeWire server. + { name = libpipewire-module-spa-node-factory } + + # Allows creating nodes that run in the context of the + # client. Is used by all clients that want to provide + # data to PipeWire. + { name = libpipewire-module-client-node } + + # The access module can perform access checks and block + # new clients. + { name = libpipewire-module-access + args = { + # access.allowed to list an array of paths of allowed + # apps. + #access.allowed = [ + # @session_manager_path@ + #] + + # An array of rejected paths. + #access.rejected = [ ] + + # An array of paths with restricted access. + #access.restricted = [ ] + + # Anything not in the above lists gets assigned the + # access.force permission. + #access.force = flatpak + } + } + + # Makes a factory for wrapping nodes in an adapter with a + # converter and resampler. + { name = libpipewire-module-adapter } + + # Makes a factory for creating links between ports. + { name = libpipewire-module-link-factory } +] + +context.objects = [ + #{ factory = <factory-name> + # [ args = { <key> = <value> ... } ] + # [ flags = [ [ nofail ] ] + #} + # + # Creates an object from a PipeWire factory with the given parameters. + # If nofail is given, errors are ignored (and no object is created). + # + #{ factory = spa-node-factory args = { factory.name = videotestsrc node.name = videotestsrc Spa:Pod:Object:Param:Props:patternType = 1 } } + #{ factory = spa-device-factory args = { factory.name = api.jack.device foo=bar } flags = [ nofail ] } + #{ factory = spa-device-factory args = { factory.name = api.alsa.enum.udev } } + #{ factory = spa-node-factory args = { factory.name = api.alsa.seq.bridge node.name = Internal-MIDI-Bridge } } + #{ factory = adapter args = { factory.name = audiotestsrc node.name = my-test } } + #{ factory = spa-node-factory args = { factory.name = api.vulkan.compute.source node.name = my-compute-source } } + + # Make a default metadata store + { factory = metadata args = { metadata.name = default } } + + # A default dummy driver. This handles nodes marked with the "node.always-driver" + # property when no other driver is currently active. JACK clients need this. + { factory = spa-node-factory + args = { + factory.name = support.node.driver + node.name = Dummy-Driver + node.group = pipewire.dummy + priority.driver = 20000 + } + } + { factory = spa-node-factory + args = { + factory.name = support.node.driver + node.name = Freewheel-Driver + priority.driver = 19000 + node.group = pipewire.freewheel + node.freewheel = true + } + } + + # This creates a single PCM source device for the given + # alsa device path hw:0. You can change source to sink + # to make a sink in the same way. + { factory = adapter + args = { + factory.name = api.alsa.pcm.source + node.name = "system" + node.description = "system" + media.class = "Audio/Source" + api.alsa.path = "hw:0" + #api.alsa.period-size = 0 + #api.alsa.period-num = 0 + #api.alsa.headroom = 0 + #api.alsa.start-delay = 0 + #api.alsa.disable-mmap = false + #api.alsa.disable-batch = false + #api.alsa.use-chmap = false + #api.alsa.multirate = true + #latency.internal.rate = 0 + #latency.internal.ns = 0 + #clock.name = api.alsa.0 + node.suspend-on-idle = true + #audio.format = "S32" + #audio.rate = 48000 + #audio.allowed-rates = [ ] + #audio.channels = 4 + #audio.position = [ FL FR RL RR ] + #resample.quality = 4 + resample.disable = true + #monitor.channel-volumes = false + #channelmix.normalize = false + #channelmix.mix-lfe = true + #channelmix.upmix = true + #channelmix.upmix-method = psd # none, simple + #channelmix.lfe-cutoff = 150 + #channelmix.fc-cutoff = 12000 + #channelmix.rear-delay = 12.0 + #channelmix.stereo-widen = 0.0 + #channelmix.hilbert-taps = 0 + channelmix.disable = true + #dither.noise = 0 + #node.param.Props = { + # params = [ + # audio.channels 6 + # ] + #} + adapter.auto-port-config = { + mode = dsp + monitor = false + control = false + position = unknown # aux, preserve + } + #node.param.PortConfig = { + # direction = Output + # mode = dsp + # format = { + # mediaType = audio + # mediaSubtype = raw + # format = F32 + # rate = 48000 + # channels = 4 + # position = [ FL FR RL RR ] + # } + #} + } + } + { factory = adapter + args = { + factory.name = api.alsa.pcm.sink + node.name = "system" + node.description = "system" + media.class = "Audio/Sink" + api.alsa.path = "hw:0" + #api.alsa.period-size = 0 + #api.alsa.period-num = 0 + #api.alsa.headroom = 0 + #api.alsa.start-delay = 0 + #api.alsa.disable-mmap = false + #api.alsa.disable-batch = false + #api.alsa.use-chmap = false + #api.alsa.multirate = true + #latency.internal.rate = 0 + #latency.internal.ns = 0 + #clock.name = api.alsa.0 + node.suspend-on-idle = true + #audio.format = "S32" + #audio.rate = 48000 + #audio.allowed-rates = [ ] + #audio.channels = 2 + #audio.position = "FL,FR" + #resample.quality = 4 + resample.disable = true + #channelmix.normalize = false + #channelmix.mix-lfe = true + #channelmix.upmix = true + #channelmix.upmix-method = psd # none, simple + #channelmix.lfe-cutoff = 150 + #channelmix.fc-cutoff = 12000 + #channelmix.rear-delay = 12.0 + #channelmix.stereo-widen = 0.0 + #channelmix.hilbert-taps = 0 + channelmix.disable = true + #dither.noise = 0 + #node.param.Props = { + # params = [ + # audio.format S16 + # ] + #} + adapter.auto-port-config = { + mode = dsp + monitor = false + control = false + position = unknown # aux, preserve + } + #node.param.PortConfig = { + # direction = Input + # mode = dsp + # monitor = true + # format = { + # mediaType = audio + # mediaSubtype = raw + # format = F32 + # rate = 48000 + # channels = 4 + # } + #} + } + } + # This creates a new Source node. It will have input ports + # that you can link, to provide audio for this source. + #{ factory = adapter + # args = { + # factory.name = support.null-audio-sink + # node.name = "my-mic" + # node.description = "Microphone" + # media.class = "Audio/Source/Virtual" + # audio.position = "FL,FR" + # adapter.auto-port-config = { + # mode = dsp + # monitor = true + # position = preserve # unknown, aux, preserve + # } + # } + #} + # This creates a new link between the source and the virtual + # source ports. + #{ factory = link-factory + # args = { + # link.output.node = system + # link.output.port = capture_1 + # link.input.node = my-mic + # link.input.port = input_FL + # link.passive = true + # } + #} + #{ factory = link-factory + # args = { + # link.output.node = system + # link.output.port = capture_2 + # link.input.node = my-mic + # link.input.port = input_FR + # link.passive = true + # } + #} +] + +context.exec = [ + #{ path = <program-name> [ args = "<arguments>" ] } + # + # Execute the given program with arguments. + # + # You can optionally start the pulseaudio-server here as well + # but it is better to start it as a systemd service. + # It can be interesting to start another daemon here that listens + # on another address with the -a option (eg. -a tcp:4713). + # + #@pulse_comment@{ path = "@pipewire_path@" args = "-c pipewire-pulse.conf" } +] |