Adding upstream version 3.7.10.upstream/3.7.10upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 489 insertions, 0 deletions

diff --git a/README_FILES/BASIC_CONFIGURATION_README b/README_FILES/BASIC_CONFIGURATION_README
new file mode 100644
index 0000000..4bc4d84
--- /dev/null
+++ b/README_FILES/BASIC_CONFIGURATION_README
@@ -0,0 +1,489 @@
+PPoossttffiixx BBaassiicc CCoonnffiigguurraattiioonn
+
+-------------------------------------------------------------------------------
+
+IInnttrroodduuccttiioonn
+
+Postfix has several hundred configuration parameters that are controlled via
+the main.cf file. Fortunately, all parameters have sensible default values. In
+many cases, you need to configure only two or three parameters before you can
+start to play with the mail system. Here's a quick introduction to the syntax:
+
+  * Postfix configuration files
+
+The text below assumes that you already have Postfix installed on the system,
+either by compiling the source code yourself (as described in the INSTALL file)
+or by installing an already compiled version.
+
+This document covers basic Postfix configuration. Information about how to
+configure Postfix for specific applications such as mailhub, firewall or dial-
+up client can be found in the STANDARD_CONFIGURATION_README file. But don't go
+there until you already have covered the material presented below.
+
+The first parameters of interest specify the machine's identity and role in the
+network.
+
+  * What domain name to use in outbound mail
+
+  * What domains to receive mail for
+
+  * What clients to relay mail from
+
+  * What destinations to relay mail to
+
+  * What delivery method: direct or indirect
+
+The default values for many other configuration parameters are derived from
+just these.
+
+The next parameter of interest controls the amount of mail sent to the local
+postmaster:
+
+  * What trouble to report to the postmaster
+
+Be sure to set the following correctly if you're behind a proxy or network
+address translator, and you are running a backup MX host for some other domain:
+
+  * Proxy/NAT external network addresses
+
+Postfix daemon processes run in the background, and log problems and normal
+activity to the syslog daemon. Here are a few things that you need to be aware
+of:
+
+  * What you need to know about Postfix logging
+
+If your machine has unusual security requirements you may want to run Postfix
+daemon processes inside a chroot environment.
+
+  * Running Postfix daemon processes chrooted
+
+If you run Postfix on a virtual network interface, or if your machine runs
+other mailers on virtual interfaces, you'll have to look at the other
+parameters listed here as well:
+
+  * My own hostname
+
+  * My own domain name
+
+  * My own network addresses
+
+PPoossttffiixx ccoonnffiigguurraattiioonn ffiilleess
+
+By default, Postfix configuration files are in /etc/postfix. The two most
+important files are main.cf and master.cf; these files must be owned by root.
+Giving someone else write permission to main.cf or master.cf (or to their
+parent directories) means giving root privileges to that person.
+
+In /etc/postfix/main.cf you will have to set up a minimal number of
+configuration parameters. Postfix configuration parameters resemble shell
+variables, with two important differences: the first one is that Postfix does
+not know about quotes like the UNIX shell does.
+
+You specify a configuration parameter as:
+
+    /etc/postfix/main.cf:
+        parameter = value
+
+and you use it by putting a "$" character in front of its name:
+
+    /etc/postfix/main.cf:
+        other_parameter = $parameter
+
+You can use $parameter before it is given a value (that is the second main
+difference with UNIX shell variables). The Postfix configuration language uses
+lazy evaluation, and does not look at a parameter value until it is needed at
+runtime.
+
+Postfix uses database files for access control, address rewriting and other
+purposes. The DATABASE_README file gives an introduction to how Postfix works
+with Berkeley DB, LDAP or SQL and other types. Here is a common example of how
+Postfix invokes a database:
+
+    /etc/postfix/main.cf:
+        virtual_alias_maps = hash:/etc/postfix/virtual
+
+Whenever you make a change to the main.cf or master.cf file, execute the
+following command as root in order to refresh a running mail system:
+
+    # postfix reload
+
+WWhhaatt ddoommaaiinn nnaammee ttoo uussee iinn oouuttbboouunndd mmaaiill
+
+The myorigin parameter specifies the domain that appears in mail that is posted
+on this machine. The default is to use the local machine name, $myhostname,
+which defaults to the name of the machine. Unless you are running a really
+small site, you probably want to change that into $mydomain, which defaults to
+the parent domain of the machine name.
+
+For the sake of consistency between sender and recipient addresses, myorigin
+also specifies the domain name that is appended to an unqualified recipient
+address.
+
+Examples (specify only one of the following):
+
+    /etc/postfix/main.cf:
+        myorigin = $myhostname (default: send mail as "user@$myhostname")
+        myorigin = $mydomain   (probably desirable: "user@$mydomain")
+
+WWhhaatt ddoommaaiinnss ttoo rreecceeiivvee mmaaiill ffoorr
+
+The mydestination parameter specifies what domains this machine will deliver
+locally, instead of forwarding to another machine. The default is to receive
+mail for the machine itself. See the VIRTUAL_README file for how to configure
+Postfix for hosted domains.
+
+You can specify zero or more domain names, "/file/name" patterns and/or "type:
+table" lookup tables (such as hash:, btree:, nis:, ldap:, or mysql:), separated
+by whitespace and/or commas. A "/file/name" pattern is replaced by its
+contents; "type:table" requests that a table lookup is done and merely tests
+for existence: the lookup result is ignored.
+
+IMPORTANT: If your machine is a mail server for its entire domain, you must
+list $mydomain as well.
+
+Example 1: default setting.
+
+    /etc/postfix/main.cf:
+        mydestination = $myhostname localhost.$mydomain localhost
+
+Example 2: domain-wide mail server.
+
+    /etc/postfix/main.cf:
+        mydestination = $myhostname localhost.$mydomain localhost $mydomain
+
+Example 3: host with multiple DNS A records.
+
+    /etc/postfix/main.cf:
+        mydestination = $myhostname localhost.$mydomain localhost
+            www.$mydomain ftp.$mydomain
+
+Caution: in order to avoid mail delivery loops, you must list all hostnames of
+the machine, including $myhostname, and localhost.$mydomain.
+
+WWhhaatt cclliieennttss ttoo rreellaayy mmaaiill ffrroomm
+
+By default, Postfix will forward mail from clients in authorized network blocks
+to any destination. Authorized networks are defined with the mynetworks
+configuration parameter. The current default is to authorize the local machine
+only. Prior to Postfix 3.0, the default was to authorize all clients in the IP
+subnetworks that the local machine is attached to.
+
+Postfix can also be configured to relay mail from "mobile" clients that send
+mail from outside an authorized network block. This is explained in the
+SASL_README and TLS_README documents.
+
+IMPORTANT: If your machine is connected to a wide area network then the
+"mynetworks_style = subnet" setting may be too friendly.
+
+Examples (specify only one of the following):
+
+    /etc/postfix/main.cf:
+        mynetworks_style = subnet  (not safe on a wide area network)
+        mynetworks_style = host    (authorize local machine only)
+        mynetworks = 127.0.0.0/8   (authorize local machine only)
+        mynetworks = 127.0.0.0/8 168.100.189.2/32 (authorize local machine)
+        mynetworks = 127.0.0.0/8 168.100.189.2/28 (authorize local networks)
+
+You can specify the trusted networks in the main.cf file, or you can let
+Postfix do the work for you. The default is to let Postfix do the work. The
+result depends on the mynetworks_style parameter value.
+
+  * Specify "mynetworks_style = host" (the default when compatibility_level >=
+    2) when Postfix should forward mail from only the local machine.
+
+  * Specify "mynetworks_style = subnet" (the default when compatibility_level <
+    2) when Postfix should forward mail from SMTP clients in the same IP
+    subnetworks as the local machine. On Linux, this works correctly only with
+    interfaces specified with the "ifconfig" or "ip" command.
+
+  * Specify "mynetworks_style = class" when Postfix should forward mail from
+    SMTP clients in the same IP class A/B/C networks as the local machine.
+    Don't do this with a dialup site - it would cause Postfix to "trust" your
+    entire provider's network. Instead, specify an explicit mynetworks list by
+    hand, as described below.
+
+Alternatively, you can specify the mynetworks list by hand, in which case
+Postfix ignores the mynetworks_style setting. To specify the list of trusted
+networks by hand, specify network blocks in CIDR (network/mask) notation, for
+example:
+
+    /etc/postfix/main.cf:
+        mynetworks = 168.100.189.0/28, 127.0.0.0/8
+
+You can also specify the absolute pathname of a pattern file instead of listing
+the patterns in the main.cf file.
+
+WWhhaatt ddeessttiinnaattiioonnss ttoo rreellaayy mmaaiill ttoo
+
+By default, Postfix will forward mail from strangers (clients outside
+authorized networks) to authorized remote destinations only. Authorized remote
+destinations are defined with the relay_domains configuration parameter. The
+default is to authorize all domains (and subdomains) of the domains listed with
+the mydestination parameter.
+
+Examples (specify only one of the following):
+
+    /etc/postfix/main.cf:
+        relay_domains = $mydestination (default)
+        relay_domains =           (safe: never forward mail from strangers)
+        relay_domains = $mydomain (forward mail to my domain and subdomains)
+
+WWhhaatt ddeelliivveerryy mmeetthhoodd:: ddiirreecctt oorr iinnddiirreecctt
+
+By default, Postfix tries to deliver mail directly to the Internet. Depending
+on your local conditions this may not be possible or desirable. For example,
+your system may be turned off outside office hours, it may be behind a
+firewall, or it may be connected via a provider who does not allow direct mail
+to the Internet. In those cases you need to configure Postfix to deliver mail
+indirectly via a relay host.
+
+Examples (specify only one of the following):
+
+    /etc/postfix/main.cf:
+        relayhost =                   (default: direct delivery to Internet)
+        relayhost = $mydomain         (deliver via local mailhub)
+        relayhost = [mail.$mydomain]  (deliver via local mailhub)
+        relayhost = [mail.isp.tld]    (deliver via provider mailhub)
+
+The form enclosed with [] eliminates DNS MX lookups. Don't worry if you don't
+know what that means. Just be sure to specify the [] around the mailhub
+hostname that your ISP gave to you, otherwise mail may be mis-delivered.
+
+The STANDARD_CONFIGURATION_README file has more hints and tips for firewalled
+and/or dial-up networks.
+
+WWhhaatt ttrroouubbllee ttoo rreeppoorrtt ttoo tthhee ppoossttmmaasstteerr
+
+You should set up a postmaster alias in the aliases(5) table that directs mail
+to a human person. The postmaster address is required to exist, so that people
+can report mail delivery problems. While you're updating the aliases(5) table,
+be sure to direct mail for the super-user to a human person too.
+
+    /etc/aliases:
+        postmaster: you
+        root: you
+
+Execute the command "newaliases" after changing the aliases file. Instead of /
+etc/aliases, your alias file may be located elsewhere. Use the command
+"postconf alias_maps" to find out.
+
+The Postfix system reports problems to the postmaster alias. You may not be
+interested in all types of trouble reports, so this reporting mechanism is
+configurable. The default is to report only serious problems (resource,
+software) to postmaster:
+
+Default setting:
+
+    /etc/postfix/main.cf:
+        notify_classes = resource, software
+
+The meaning of the classes is as follows:
+
+    bounce
+        Inform the postmaster of undeliverable mail. Either send the postmaster
+        a copy of undeliverable mail that is returned to the sender, or send a
+        transcript of the SMTP session when Postfix rejected mail. For privacy
+        reasons, the postmaster copy of undeliverable mail is truncated after
+        the original message headers. This implies "2bounce" (see below). See
+        also the luser_relay feature. The notification is sent to the address
+        specified with the bounce_notice_recipient configuration parameter
+        (default: postmaster).
+    2bounce
+        When Postfix is unable to return undeliverable mail to the sender, send
+        it to the postmaster instead (without truncating the message after the
+        primary headers). The notification is sent to the address specified
+        with the 2bounce_notice_recipient configuration parameter (default:
+        postmaster).
+    delay
+        Inform the postmaster of delayed mail. In this case, the postmaster
+        receives message headers only. The notification is sent to the address
+        specified with the delay_notice_recipient configuration parameter
+        (default: postmaster).
+    policy
+        Inform the postmaster of client requests that were rejected because of
+        (UCE) policy restrictions. The postmaster receives a transcript of the
+        SMTP session. The notification is sent to the address specified with
+        the error_notice_recipient configuration parameter (default:
+        postmaster).
+    protocol
+        Inform the postmaster of protocol errors (client or server side) or
+        attempts by a client to execute unimplemented commands. The postmaster
+        receives a transcript of the SMTP session. The notification is sent to
+        the address specified with the error_notice_recipient configuration
+        parameter (default: postmaster).
+    resource
+        Inform the postmaster of mail not delivered due to resource problems
+        (for example, queue file write errors). The notification is sent to the
+        address specified with the error_notice_recipient configuration
+        parameter (default: postmaster).
+    software
+        Inform the postmaster of mail not delivered due to software problems.
+        The notification is sent to the address specified with the
+        error_notice_recipient configuration parameter (default: postmaster).
+
+PPrrooxxyy//NNAATT eexxtteerrnnaall nneettwwoorrkk aaddddrreesssseess
+
+Some mail servers are connected to the Internet via a network address
+translator (NAT) or proxy. This means that systems on the Internet connect to
+the address of the NAT or proxy, instead of connecting to the network address
+of the mail server. The NAT or proxy forwards the connection to the network
+address of the mail server, but Postfix does not know this.
+
+If you run a Postfix server behind a proxy or NAT, you need to configure the
+proxy_interfaces parameter and specify all the external proxy or NAT addresses
+that Postfix receives mail on. You may specify symbolic hostnames instead of
+network addresses.
+
+IMPORTANT: You must specify your proxy/NAT external addresses when your system
+is a backup MX host for other domains, otherwise mail delivery loops will
+happen when the primary MX host is down.
+
+Example: host behind NAT box running a backup MX host.
+
+    /etc/postfix/main.cf:
+        proxy_interfaces = 1.2.3.4 (the proxy/NAT external network address)
+
+WWhhaatt yyoouu nneeeedd ttoo kknnooww aabboouutt PPoossttffiixx llooggggiinngg
+
+Postfix daemon processes run in the background, and log problems and normal
+activity to the syslog daemon. The syslogd process sorts events by class and
+severity, and appends them to logfiles. The logging classes, levels and logfile
+names are usually specified in /etc/syslog.conf. At the very least you need
+something like:
+
+    /etc/syslog.conf:
+        mail.err                                    /dev/console
+        mail.debug                                  /var/log/maillog
+
+After changing the syslog.conf file, send a "HUP" signal to the syslogd
+process.
+
+IMPORTANT: many syslogd implementations will not create files. You must create
+files before (re)starting syslogd.
+
+IMPORTANT: on Linux you need to put a "-" character before the pathname, e.g.,
+-/var/log/maillog, otherwise the syslogd process will use more system resources
+than Postfix.
+
+Hopefully, the number of problems will be small, but it is a good idea to run
+every night before the syslog files are rotated:
+
+    # postfix check
+    # egrep '(reject|warning|error|fatal|panic):' /some/log/file
+
+  * The first line (postfix check) causes Postfix to report file permission/
+    ownership discrepancies.
+
+  * The second line looks for problem reports from the mail software, and
+    reports how effective the relay and junk mail access blocks are. This may
+    produce a lot of output. You will want to apply some postprocessing to
+    eliminate uninteresting information.
+
+The DEBUG_README document describes the meaning of the "warning" etc. labels in
+Postfix logging.
+
+RRuunnnniinngg PPoossttffiixx ddaaeemmoonn pprroocceesssseess cchhrrooootteedd
+
+Postfix daemon processes can be configured (via the master.cf file) to run in a
+chroot jail. The processes run at a fixed low privilege and with file system
+access limited to the Postfix queue directories (/var/spool/postfix). This
+provides a significant barrier against intrusion. The barrier is not
+impenetrable (chroot limits file system access only), but every little bit
+helps.
+
+With the exception of Postfix daemons that deliver mail locally and/or that
+execute non-Postfix commands, every Postfix daemon can run chrooted.
+
+Sites with high security requirements should consider to chroot all daemons
+that talk to the network: the smtp(8) and smtpd(8) processes, and perhaps also
+the lmtp(8) client. The author's own porcupine.org mail server runs all daemons
+chrooted that can be chrooted.
+
+The default /etc/postfix/master.cf file specifies that no Postfix daemon runs
+chrooted. In order to enable chroot operation, edit the file /etc/postfix/
+master.cf, and follow instructions in the file. When you're finished, execute
+"postfix reload" to make the change effective.
+
+Note that a chrooted daemon resolves all filenames relative to the Postfix
+queue directory (/var/spool/postfix). For successful use of a chroot jail, most
+UNIX systems require you to bring in some files or device nodes. The examples/
+chroot-setup directory in the source code distribution has a collection of
+scripts that help you set up Postfix chroot environments on different operating
+systems.
+
+Additionally, you almost certainly need to configure syslogd so that it listens
+on a socket inside the Postfix queue directory. Examples of syslogd command
+line options that achieve this for specific systems:
+
+FreeBSD: syslogd -l /var/spool/postfix/var/run/log
+
+Linux, OpenBSD: syslogd -a /var/spool/postfix/dev/log
+
+MMyy oowwnn hhoossttnnaammee
+
+The myhostname parameter specifies the fully-qualified domain name of the
+machine running the Postfix system. $myhostname appears as the default value in
+many other Postfix configuration parameters.
+
+By default, myhostname is set to the local machine name. If your local machine
+name is not in fully-qualified domain name form, or if you run Postfix on a
+virtual interface, you will have to specify the fully-qualified domain name
+that the mail system should use.
+
+Alternatively, if you specify mydomain in main.cf, then Postfix will use its
+value to generate a fully-qualified default value for the myhostname parameter.
+
+Examples (specify only one of the following):
+
+    /etc/postfix/main.cf:
+        myhostname = host.local.domain (machine name is not FQDN)
+        myhostname = host.virtual.domain (virtual interface)
+        myhostname = virtual.domain (virtual interface)
+
+MMyy oowwnn ddoommaaiinn nnaammee
+
+The mydomain parameter specifies the parent domain of $myhostname. By default,
+it is derived from $myhostname by stripping off the first part (unless the
+result would be a top-level domain).
+
+Conversely, if you specify mydomain in main.cf, then Postfix will use its value
+to generate a fully-qualified default value for the myhostname parameter.
+
+Examples (specify only one of the following):
+
+    /etc/postfix/main.cf:
+        mydomain = local.domain
+        mydomain = virtual.domain (virtual interface)
+
+MMyy oowwnn nneettwwoorrkk aaddddrreesssseess
+
+The inet_interfaces parameter specifies all network interface addresses that
+the Postfix system should listen on; mail addressed to "user@[network address]"
+will be delivered locally, as if it is addressed to a domain listed in
+$mydestination.
+
+You can override the inet_interfaces setting in the Postfix master.cf file by
+prepending an IP address to a server name.
+
+The default is to listen on all active interfaces. If you run mailers on
+virtual interfaces, you will have to specify what interfaces to listen on.
+
+IMPORTANT: If you run MTAs on virtual interfaces you must specify explicit
+inet_interfaces values for the MTA that receives mail for the machine itself:
+this MTA should never listen on the virtual interfaces or you would have a
+mailer loop when a virtual MTA is down.
+
+Example: default setting.
+
+    /etc/postfix/main.cf:
+        inet_interfaces = all
+
+Example: host running one or more virtual mailers. For each Postfix instance,
+specify only one of the following.
+
+    /etc/postfix/main.cf:
+        inet_interfaces = virtual.host.tld         (virtual Postfix)
+        inet_interfaces = $myhostname localhost... (non-virtual Postfix)
+
+Note: you need to stop and start Postfix after changing this parameter.
+