Adding upstream version 3.7.10.upstream/3.7.10upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 179 insertions, 0 deletions

diff --git a/README_FILES/XFORWARD_README b/README_FILES/XFORWARD_README
new file mode 100644
index 0000000..84802ed
--- /dev/null
+++ b/README_FILES/XFORWARD_README
@@ -0,0 +1,179 @@
+PPoossttffiixx XXFFOORRWWAARRDD HHoowwttoo
+
+-------------------------------------------------------------------------------
+
+PPuurrppoossee ooff tthhee XXFFOORRWWAARRDD eexxtteennssiioonn ttoo SSMMTTPP
+
+When an SMTP server announces support for the XFORWARD command, an SMTP client
+may send information that overrides one or more client-related logging
+attributes. The XFORWARD command targets the following problem:
+
+  * Logging after SMTP-based content filter. With the deployment of Internet-
+    >MTA1->filter->MTA2 style content filter applications, the logging of
+    client and message identifying information changes when MTA1 gives the mail
+    to the content filter. To simplify the interpretation of MTA2 logging, it
+    would help if MTA1 could forward remote client and/or message identifying
+    information through the content filter to MTA2, so that the information
+    could be logged as part of mail handling transactions.
+
+This extension is implemented as a separate ESMTP command, and can be used to
+transmit client or message attributes incrementally. It is not implemented by
+passing additional parameters via the MAIL FROM command, because doing so would
+require extending the MAIL FROM command length limit by another 600 or more
+characters beyond the space that is already needed to support other extensions
+such as AUTH and DSN.
+
+XXFFOORRWWAARRDD CCoommmmaanndd ssyynnttaaxx
+
+An example of a client-server conversation is given at the end of this
+document.
+
+In SMTP server EHLO replies, the keyword associated with this extension is
+XFORWARD. The keyword is followed by the names of the attributes that the
+XFORWARD implementation supports.
+
+After receiving the server's announcement for XFORWARD support, the client may
+send XFORWARD requests at any time except in the middle of a mail delivery
+transaction (i.e. between MAIL and RSET or DOT). The command may be pipelined
+when the server supports ESMTP command pipelining.
+
+The syntax of XFORWARD requests is described below. Upper case and quoted
+strings specify terminals, lowercase strings specify meta terminals, and SP is
+whitespace. Although command and attribute names are shown in upper case, they
+are in fact case insensitive.
+
+    xforward-command = XFORWARD 1*( SP attribute-name"="attribute-value )
+
+    attribute-name = ( NAME | ADDR | PORT | PROTO | HELO | IDENT | SOURCE )
+
+    attribute-value = xtext
+
+  * Attribute values are xtext encoded as per RFC 1891.
+
+  * The NAME attribute specifies the up-stream hostname, or [UNAVAILABLE] when
+    the information is unavailable. The hostname may be a non-DNS hostname.
+
+  * The ADDR attribute specifies the up-stream network address: a numerical
+    IPv4 network address, an IPv6 address prefixed with IPV6:, or [UNAVAILABLE]
+    when the address information is unavailable. Address information is not
+    enclosed with [].
+
+  * The PORT attribute specifies an up-stream client TCP port number in
+    decimal, or [UNAVAILABLE] when the information is unavailable.
+
+  * The PROTO attribute specifies the mail protocol for receiving mail from the
+    up-stream host. This may be an SMTP or non-SMTP protocol name of up to 64
+    characters, or [UNAVAILABLE] when the information is unavailable.
+
+  * The HELO attribute specifies the hostname that the up-stream host announced
+    itself with (not necessarily via the SMTP HELO command), or [UNAVAILABLE]
+    when the information is unavailable. The hostname may be a non-DNS
+    hostname.
+
+  * The IDENT attribute specifies a local message identifier on the up-stream
+    host, or [UNAVAILABLE] when the information is unavailable. The down-stream
+    MTA may log this information together with its own local message identifier
+    to facilitate message tracking across MTAs.
+
+  * The SOURCE attribute specifies LOCAL when the message was received from a
+    source that is local with respect to the up-stream host (for example, the
+    message originated from the up-stream host itself), REMOTE for all other
+    mail, or [UNAVAILABLE] when the information is unavailable. The down-stream
+    MTA may decide to enable features such as header munging or address
+    qualification with mail from local sources but not other sources.
+
+Note 1: an attribute-value element must not be longer than 255 characters
+(specific attributes may impose shorter lengths). After xtext decoding,
+attribute values must not contain control characters, non-ASCII characters,
+whitespace, or other characters that are special in message headers.
+
+Note 2: DNS hostnames can be up to 255 characters long. The XFORWARD client
+implementation must not send XFORWARD commands that exceed the 512 character
+limit for SMTP commands.
+
+Note 3: [UNAVAILABLE] may be specified in upper case, lower case or mixed case.
+
+Note 4: Postfix implementations prior to version 2.3 do not xtext encode
+attribute values. Servers that wish to interoperate with these older
+implementations should be prepared to receive unencoded information.
+
+XXFFOORRWWAARRDD SSeerrvveerr ooppeerraattiioonn
+
+The server maintains a set of XFORWARD attributes with forwarded information,
+in addition the current SMTP session attributes. Normally, all XFORWARD
+attributes are in the undefined state, and the server uses the current SMTP
+session attributes for logging purposes.
+
+Upon receipt of an initial XFORWARD command, the SMTP server initializes all
+XFORWARD attributes to [UNAVAILABLE]. With each valid XFORWARD command, the
+server updates XFORWARD attributes with the specified values.
+
+The server must not mix client attributes from XFORWARD with client attributes
+from the current SMTP session.
+
+At the end of each MAIL FROM transaction (i.e. RSET or DOT), the server resets
+all XFORWARD attributes to the undefined state, and is ready to receive another
+initial XFORWARD command.
+
+XXFFOORRWWAARRDD SSeerrvveerr rreeppllyy ccooddeess
+
+     _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 
+    |CCooddee|MMeeaanniinngg                         |
+    |_ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |
+    |250 |success                         |
+    |_ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |
+    |421 |unable to proceed, disconnecting|
+    |_ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |
+    |501 |bad command parameter syntax    |
+    |_ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |
+    |503 |mail transaction in progress    |
+    |_ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |
+    |550 |insufficient authorization      |
+    |_ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |
+
+XXFFOORRWWAARRDD EExxaammppllee
+
+In the following example, information sent by the client is shown in bold font.
+
+    220 server.example.com ESMTP Postfix
+    EEHHLLOO cclliieenntt..eexxaammppllee..ccoomm
+    250-server.example.com
+    250-PIPELINING
+    250-SIZE 10240000
+    250-VRFY
+    250-ETRN
+    250-XFORWARD NAME ADDR PROTO HELO
+    250 8BITMIME
+    XXFFOORRWWAARRDD NNAAMMEE==ssppiikkee..ppoorrccuuppiinnee..oorrgg AADDDDRR==116688..110000..118899..22 PPRROOTTOO==EESSMMTTPP
+    250 Ok
+    XXFFOORRWWAARRDD HHEELLOO==ssppiikkee..ppoorrccuuppiinnee..oorrgg
+    250 Ok
+    MMAAIILL FFRROOMM::<<wwiieettssee@@ppoorrccuuppiinnee..oorrgg>>
+    250 Ok
+    RRCCPPTT TTOO::<<uusseerr@@eexxaammppllee..ccoomm>>
+    250 Ok
+    DDAATTAA
+    354 End data with <CR><LF>.<CR><LF>
+    .. .. ..mmeessssaaggee ccoonntteenntt.. .. ..
+    ..
+    250 Ok: queued as 3CF6B2AAE8
+    QQUUIITT
+    221 Bye
+
+SSeeccuurriittyy
+
+The XFORWARD command changes audit trails. Use of this command must be
+restricted to authorized clients.
+
+SSMMTTPP ccoonnnneeccttiioonn ccaacchhiinngg
+
+SMTP connection caching makes it possible to deliver multiple messages within
+the same SMTP session. The XFORWARD attributes are reset after the MAIL FROM
+transaction completes (after RSET or DOT), so there is no risk of information
+leakage.
+
+RReeffeerreenncceess
+
+Moore, K, "SMTP Service Extension for Delivery Status Notifications", RFC 1891,
+January 1996.
+