Adding upstream version 3.7.10.upstream/3.7.10upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1171 insertions, 0 deletions

diff --git a/src/smtpd/smtpd_proxy.c b/src/smtpd/smtpd_proxy.c
new file mode 100644
index 0000000..1c1f9fc
--- /dev/null
+++ b/src/smtpd/smtpd_proxy.c
@@ -0,0 +1,1171 @@
+/*++
+/* NAME
+/*	smtpd_proxy 3
+/* SUMMARY
+/*	SMTP server pass-through proxy client
+/* SYNOPSIS
+/*	#include <smtpd.h>
+/*	#include <smtpd_proxy.h>
+/*
+/*	typedef struct {
+/* .in +4
+/*		VSTREAM *stream;	/* SMTP proxy or replay log */
+/*		VSTRING *buffer;	/* last SMTP proxy response */
+/*		/* other fields... */
+/* .in -4
+/*	} SMTPD_PROXY;
+/*
+/*	int	smtpd_proxy_create(state, flags, service, timeout,
+/*					ehlo_name, mail_from)
+/*	SMTPD_STATE *state;
+/*	int	flags;
+/*	const char *service;
+/*	int	timeout;
+/*	const char *ehlo_name;
+/*	const char *mail_from;
+/*
+/*	int	proxy->cmd(state, expect, format, ...)
+/*	SMTPD_PROXY *proxy;
+/*	SMTPD_STATE *state;
+/*	int	expect;
+/*	const char *format;
+/*
+/*	void	smtpd_proxy_free(state)
+/*	SMTPD_STATE *state;
+/*
+/*	int	smtpd_proxy_parse_opts(param_name, param_val)
+/*	const char *param_name;
+/*	const char *param_val;
+/* RECORD-LEVEL ROUTINES
+/*	int	proxy->rec_put(proxy->stream, rec_type, data, len)
+/*	SMTPD_PROXY *proxy;
+/*	int	rec_type;
+/*	const char *data;
+/*	ssize_t	len;
+/*
+/*	int	proxy->rec_fprintf(proxy->stream, rec_type, format, ...)
+/*	SMTPD_PROXY *proxy;
+/*	int	rec_type;
+/*	cont char *format;
+/* DESCRIPTION
+/*	The functions in this module implement a pass-through proxy
+/*	client.
+/*
+/*	In order to minimize the intrusiveness of pass-through
+/*	proxying, 1) the proxy server must support the same MAIL
+/*	FROM/RCPT syntax that Postfix supports, 2) the record-level
+/*	routines for message content proxying have the same interface
+/*	as the routines that are used for non-proxied mail.
+/*
+/*	smtpd_proxy_create() takes a description of a before-queue
+/*	filter.  Depending on flags, it either arranges to buffer
+/*	up commands and message content until the entire message
+/*	is received, or it immediately connects to the proxy service,
+/*	sends EHLO, sends client information with the XFORWARD
+/*	command if possible, sends the MAIL FROM command, and
+/*	receives the reply.
+/*	A non-zero result value means trouble: either the proxy is
+/*	unavailable, or it did not send the expected reply.
+/*	All results are reported via the proxy->buffer field in a
+/*	form that can be sent to the SMTP client.  An unexpected
+/*	2xx or 3xx proxy server response is replaced by a generic
+/*	error response to avoid support problems.
+/*	In case of error, smtpd_proxy_create() updates the
+/*	state->error_mask and state->err fields, and leaves the
+/*	SMTPD_PROXY handle in an unconnected state.  Destroy the
+/*	handle after reporting the error reply in the proxy->buffer
+/*	field.
+/*
+/*	proxy->cmd() formats and either buffers up the command and
+/*	expected response until the entire message is received, or
+/*	it immediately sends the specified command to the proxy
+/*	server, and receives the proxy server reply.
+/*	A non-zero result value means trouble: either the proxy is
+/*	unavailable, or it did not send the expected reply.
+/*	All results are reported via the proxy->buffer field in a
+/*	form that can be sent to the SMTP client.  An unexpected
+/*	2xx or 3xx proxy server response is replaced by a generic
+/*	error response to avoid support problems.
+/*	In case of error, proxy->cmd() updates the state->error_mask
+/*	and state->err fields.
+/*
+/*	smtpd_proxy_free() destroys a proxy server handle and resets
+/*	the state->proxy field.
+/*
+/*	smtpd_proxy_parse_opts() parses main.cf processing options.
+/*
+/*	proxy->rec_put() is a rec_put() clone that either buffers
+/*	up arbitrary message content records until the entire message
+/*	is received, or that immediately sends it to the proxy
+/*	server.
+/*	All data is expected to be in SMTP dot-escaped form.
+/*	All errors are reported as a REC_TYPE_ERROR result value,
+/*	with the state->error_mask, state->err and proxy-buffer
+/*	fields given appropriate values.
+/*
+/*	proxy->rec_fprintf() is a rec_fprintf() clone that formats
+/*	message content and either buffers up the record until the
+/*	entire message is received, or that immediately sends it
+/*	to the proxy server.
+/*	All data is expected to be in SMTP dot-escaped form.
+/*	All errors are reported as a REC_TYPE_ERROR result value,
+/*	with the state->error_mask, state->err and proxy-buffer
+/*	fields given appropriate values.
+/*
+/*	Arguments:
+/* .IP flags
+/*	Zero, or SMTPD_PROXY_FLAG_SPEED_ADJUST to buffer up the entire
+/*	message before contacting a before-queue content filter.
+/*	Note: when this feature is requested, the before-queue
+/*	filter MUST use the same 2xx, 4xx or 5xx reply code for all
+/*	recipients of a multi-recipient message.
+/* .IP server
+/*	The SMTP proxy server host:port. The host or host: part is optional.
+/*	This argument is not duplicated.
+/* .IP timeout
+/*	Time limit for connecting to the proxy server and for
+/*	sending and receiving proxy server commands and replies.
+/* .IP ehlo_name
+/*	The EHLO Hostname that will be sent to the proxy server.
+/*	This argument is not duplicated.
+/* .IP mail_from
+/*	The MAIL FROM command. This argument is not duplicated.
+/* .IP state
+/*	SMTP server state.
+/* .IP expect
+/*	Expected proxy server reply status code range. A warning is logged
+/*	when an unexpected reply is received. Specify one of the following:
+/* .RS
+/* .IP SMTPD_PROX_WANT_OK
+/*	The caller expects a reply in the 200 range.
+/* .IP SMTPD_PROX_WANT_MORE
+/*	The caller expects a reply in the 300 range.
+/* .IP SMTPD_PROX_WANT_ANY
+/*	The caller has no expectation. Do not warn for unexpected replies.
+/* .IP SMTPD_PROX_WANT_NONE
+/*	Do not bother waiting for a reply.
+/* .RE
+/* .IP format
+/*	A format string.
+/* .IP stream
+/*	Connection to proxy server.
+/* .IP data
+/*	Pointer to the content of one message content record.
+/* .IP len
+/*	The length of a message content record.
+/* SEE ALSO
+/*	smtpd(8) Postfix smtp server
+/* DIAGNOSTICS
+/*	Panic: internal API violations.
+/*
+/*	Fatal errors: memory allocation problem.
+/*
+/*	Warnings: unexpected response from proxy server, unable
+/*	to connect to proxy server, proxy server read/write error,
+/*	proxy speed-adjust buffer read/write error.
+/* LICENSE
+/* .ad
+/* .fi
+/*	The Secure Mailer license must be distributed with this software.
+/* AUTHOR(S)
+/*	Wietse Venema
+/*	IBM T.J. Watson Research
+/*	P.O. Box 704
+/*	Yorktown Heights, NY 10598, USA
+/*--*/
+
+/* System library. */
+
+#include <sys_defs.h>
+#include <ctype.h>
+#include <unistd.h>
+
+#ifdef STRCASECMP_IN_STRINGS_H
+#include <strings.h>
+#endif
+
+/* Utility library. */
+
+#include <msg.h>
+#include <vstream.h>
+#include <vstring.h>
+#include <stringops.h>
+#include <connect.h>
+#include <name_code.h>
+#include <mymalloc.h>
+
+/* Global library. */
+
+#include <mail_error.h>
+#include <smtp_stream.h>
+#include <cleanup_user.h>
+#include <mail_params.h>
+#include <rec_type.h>
+#include <mail_proto.h>
+#include <xtext.h>
+#include <record.h>
+#include <mail_queue.h>
+
+/* Application-specific. */
+
+#include <smtpd.h>
+#include <smtpd_proxy.h>
+
+ /*
+  * XFORWARD server features, recognized by the pass-through proxy client.
+  */
+#define SMTPD_PROXY_XFORWARD_NAME  (1<<0)	/* client name */
+#define SMTPD_PROXY_XFORWARD_ADDR  (1<<1)	/* client address */
+#define SMTPD_PROXY_XFORWARD_PROTO (1<<2)	/* protocol */
+#define SMTPD_PROXY_XFORWARD_HELO  (1<<3)	/* client helo */
+#define SMTPD_PROXY_XFORWARD_IDENT (1<<4)	/* message identifier */
+#define SMTPD_PROXY_XFORWARD_DOMAIN (1<<5)	/* origin type */
+#define SMTPD_PROXY_XFORWARD_PORT  (1<<6)	/* client port */
+
+ /*
+  * Spead-matching: we use an unlinked file for transient storage.
+  */
+static VSTREAM *smtpd_proxy_replay_stream;
+
+ /*
+  * Forward declarations.
+  */
+static void smtpd_proxy_fake_server_reply(SMTPD_STATE *, int);
+static int smtpd_proxy_rdwr_error(SMTPD_STATE *, int);
+static int PRINTFLIKE(3, 4) smtpd_proxy_cmd(SMTPD_STATE *, int, const char *,...);
+static int smtpd_proxy_rec_put(VSTREAM *, int, const char *, ssize_t);
+
+ /*
+  * SLMs.
+  */
+#define STR(x)	vstring_str(x)
+#define LEN(x)	VSTRING_LEN(x)
+#define STREQ(x, y)	(strcmp((x), (y)) == 0)
+
+/* smtpd_proxy_xforward_flush - flush forwarding information */
+
+static int smtpd_proxy_xforward_flush(SMTPD_STATE *state, VSTRING *buf)
+{
+    int     ret;
+
+    if (VSTRING_LEN(buf) > 0) {
+	ret = smtpd_proxy_cmd(state, SMTPD_PROX_WANT_OK,
+			      XFORWARD_CMD "%s", STR(buf));
+	VSTRING_RESET(buf);
+	return (ret);
+    }
+    return (0);
+}
+
+/* smtpd_proxy_xforward_send - send forwarding information */
+
+static int smtpd_proxy_xforward_send(SMTPD_STATE *state, VSTRING *buf,
+				             const char *name,
+				             int value_available,
+				             const char *value)
+{
+    size_t  new_len;
+    int     ret;
+
+#define CONSTR_LEN(s)	(sizeof(s) - 1)
+#define PAYLOAD_LIMIT	(512 - CONSTR_LEN("250 " XFORWARD_CMD "\r\n"))
+
+    if (!value_available)
+	value = XFORWARD_UNAVAILABLE;
+
+    /*
+     * Encode the attribute value.
+     */
+    if (state->expand_buf == 0)
+	state->expand_buf = vstring_alloc(100);
+    xtext_quote(state->expand_buf, value, "");
+
+    /*
+     * How much space does this attribute need? SPACE name = value.
+     */
+    new_len = strlen(name) + strlen(STR(state->expand_buf)) + 2;
+    if (new_len > PAYLOAD_LIMIT)
+	msg_warn("%s command payload %s=%.10s... exceeds SMTP protocol limit",
+		 XFORWARD_CMD, name, value);
+
+    /*
+     * Flush the buffer if we need to, and store the attribute.
+     */
+    if (VSTRING_LEN(buf) > 0 && VSTRING_LEN(buf) + new_len > PAYLOAD_LIMIT)
+	if ((ret = smtpd_proxy_xforward_flush(state, buf)) < 0)
+	    return (ret);
+    vstring_sprintf_append(buf, " %s=%s", name, STR(state->expand_buf));
+
+    return (0);
+}
+
+/* smtpd_proxy_connect - open proxy connection */
+
+static int smtpd_proxy_connect(SMTPD_STATE *state)
+{
+    SMTPD_PROXY *proxy = state->proxy;
+    int     fd;
+    char   *lines;
+    char   *words;
+    VSTRING *buf;
+    int     bad;
+    char   *word;
+    static const NAME_CODE known_xforward_features[] = {
+	XFORWARD_NAME, SMTPD_PROXY_XFORWARD_NAME,
+	XFORWARD_ADDR, SMTPD_PROXY_XFORWARD_ADDR,
+	XFORWARD_PORT, SMTPD_PROXY_XFORWARD_PORT,
+	XFORWARD_PROTO, SMTPD_PROXY_XFORWARD_PROTO,
+	XFORWARD_HELO, SMTPD_PROXY_XFORWARD_HELO,
+	XFORWARD_IDENT, SMTPD_PROXY_XFORWARD_IDENT,
+	XFORWARD_DOMAIN, SMTPD_PROXY_XFORWARD_DOMAIN,
+	0, 0,
+    };
+    int     server_xforward_features;
+    int     (*connect_fn) (const char *, int, int);
+    const char *endpoint;
+
+    /*
+     * Find connection method (default inet)
+     */
+    if (strncasecmp("unix:", proxy->service_name, 5) == 0) {
+	endpoint = proxy->service_name + 5;
+	connect_fn = unix_connect;
+    } else {
+	if (strncasecmp("inet:", proxy->service_name, 5) == 0)
+	    endpoint = proxy->service_name + 5;
+	else
+	    endpoint = proxy->service_name;
+	connect_fn = inet_connect;
+    }
+
+    /*
+     * Connect to proxy.
+     */
+    if ((fd = connect_fn(endpoint, BLOCKING, proxy->timeout)) < 0) {
+	msg_warn("connect to proxy filter %s: %m", proxy->service_name);
+	return (smtpd_proxy_rdwr_error(state, 0));
+    }
+    proxy->service_stream = vstream_fdopen(fd, O_RDWR);
+    /* Needed by our DATA-phase record emulation routines. */
+    vstream_control(proxy->service_stream,
+		    CA_VSTREAM_CTL_CONTEXT((void *) state),
+		    CA_VSTREAM_CTL_END);
+    /* Avoid poor performance when TCP MSS > VSTREAM_BUFSIZE. */
+    if (connect_fn == inet_connect)
+	vstream_tweak_tcp(proxy->service_stream);
+    smtp_timeout_setup(proxy->service_stream, proxy->timeout);
+
+    /*
+     * Get server greeting banner.
+     * 
+     * If this fails then we have a problem because the proxy should always
+     * accept our connection. Make up our own response instead of passing
+     * back a negative greeting banner: the proxy open is delayed to the
+     * point that the client expects a MAIL FROM or RCPT TO reply.
+     */
+    if (smtpd_proxy_cmd(state, SMTPD_PROX_WANT_OK, "%s", "")) {
+	smtpd_proxy_fake_server_reply(state, CLEANUP_STAT_PROXY);
+	smtpd_proxy_close(state);
+	return (-1);
+    }
+
+    /*
+     * Send our own EHLO command. If this fails then we have a problem
+     * because the proxy should always accept our EHLO command. Make up our
+     * own response instead of passing back a negative EHLO reply: the proxy
+     * open is delayed to the point that the remote SMTP client expects a
+     * MAIL FROM or RCPT TO reply.
+     */
+    if (smtpd_proxy_cmd(state, SMTPD_PROX_WANT_OK, "EHLO %s",
+			proxy->ehlo_name)) {
+	smtpd_proxy_fake_server_reply(state, CLEANUP_STAT_PROXY);
+	smtpd_proxy_close(state);
+	return (-1);
+    }
+
+    /*
+     * Parse the EHLO reply and see if we can forward logging information.
+     */
+    server_xforward_features = 0;
+    lines = STR(proxy->reply);
+    while ((words = mystrtok(&lines, "\r\n")) != 0) {
+	if (mystrtok(&words, "- ") && (word = mystrtok(&words, " \t")) != 0) {
+	    if (strcasecmp(word, XFORWARD_CMD) == 0)
+		while ((word = mystrtok(&words, " \t")) != 0)
+		    server_xforward_features |=
+			name_code(known_xforward_features,
+				  NAME_CODE_FLAG_NONE, word);
+	}
+    }
+
+    /*
+     * Send XFORWARD attributes. For robustness, explicitly specify what SMTP
+     * session attributes are known and unknown. Make up our own response
+     * instead of passing back a negative XFORWARD reply: the proxy open is
+     * delayed to the point that the remote SMTP client expects a MAIL FROM
+     * or RCPT TO reply.
+     */
+    if (server_xforward_features) {
+	buf = vstring_alloc(100);
+	bad =
+	    (((server_xforward_features & SMTPD_PROXY_XFORWARD_NAME)
+	      && smtpd_proxy_xforward_send(state, buf, XFORWARD_NAME,
+				  IS_AVAIL_CLIENT_NAME(FORWARD_NAME(state)),
+					   FORWARD_NAME(state)))
+	     || ((server_xforward_features & SMTPD_PROXY_XFORWARD_ADDR)
+		 && smtpd_proxy_xforward_send(state, buf, XFORWARD_ADDR,
+				  IS_AVAIL_CLIENT_ADDR(FORWARD_ADDR(state)),
+					      FORWARD_ADDR(state)))
+	     || ((server_xforward_features & SMTPD_PROXY_XFORWARD_PORT)
+		 && smtpd_proxy_xforward_send(state, buf, XFORWARD_PORT,
+				  IS_AVAIL_CLIENT_PORT(FORWARD_PORT(state)),
+					      FORWARD_PORT(state)))
+	     || ((server_xforward_features & SMTPD_PROXY_XFORWARD_HELO)
+		 && smtpd_proxy_xforward_send(state, buf, XFORWARD_HELO,
+				  IS_AVAIL_CLIENT_HELO(FORWARD_HELO(state)),
+					      FORWARD_HELO(state)))
+	     || ((server_xforward_features & SMTPD_PROXY_XFORWARD_IDENT)
+		 && smtpd_proxy_xforward_send(state, buf, XFORWARD_IDENT,
+				IS_AVAIL_CLIENT_IDENT(FORWARD_IDENT(state)),
+					      FORWARD_IDENT(state)))
+	     || ((server_xforward_features & SMTPD_PROXY_XFORWARD_PROTO)
+		 && smtpd_proxy_xforward_send(state, buf, XFORWARD_PROTO,
+				IS_AVAIL_CLIENT_PROTO(FORWARD_PROTO(state)),
+					      FORWARD_PROTO(state)))
+	     || ((server_xforward_features & SMTPD_PROXY_XFORWARD_DOMAIN)
+		 && smtpd_proxy_xforward_send(state, buf, XFORWARD_DOMAIN, 1,
+			 STREQ(FORWARD_DOMAIN(state), MAIL_ATTR_RWR_LOCAL) ?
+				  XFORWARD_DOM_LOCAL : XFORWARD_DOM_REMOTE))
+	     || smtpd_proxy_xforward_flush(state, buf));
+	vstring_free(buf);
+	if (bad) {
+	    smtpd_proxy_fake_server_reply(state, CLEANUP_STAT_PROXY);
+	    smtpd_proxy_close(state);
+	    return (-1);
+	}
+    }
+
+    /*
+     * Pass-through the remote SMTP client's MAIL FROM command. If this
+     * fails, then we have a problem because the proxy should always accept
+     * any MAIL FROM command that was accepted by us.
+     */
+    if (smtpd_proxy_cmd(state, SMTPD_PROX_WANT_OK, "%s",
+			proxy->mail_from) != 0) {
+	/* NOT: smtpd_proxy_fake_server_reply(state, CLEANUP_STAT_PROXY); */
+	smtpd_proxy_close(state);
+	return (-1);
+    }
+    return (0);
+}
+
+/* smtpd_proxy_fake_server_reply - produce generic error response */
+
+static void smtpd_proxy_fake_server_reply(SMTPD_STATE *state, int status)
+{
+    const CLEANUP_STAT_DETAIL *detail;
+
+    /*
+     * Either we have no server reply (connection refused), or we have an
+     * out-of-protocol server reply, so we make up a generic server error
+     * response instead.
+     */
+    detail = cleanup_stat_detail(status);
+    vstring_sprintf(state->proxy->reply,
+		    "%d %s Error: %s",
+		    detail->smtp, detail->dsn, detail->text);
+}
+
+/* smtpd_proxy_replay_rdwr_error - report replay log I/O error */
+
+static int smtpd_proxy_replay_rdwr_error(SMTPD_STATE *state)
+{
+
+    /*
+     * Log an appropriate warning message.
+     */
+    msg_warn("proxy speed-adjust log I/O error: %m");
+
+    /*
+     * Set the appropriate flags and server reply.
+     */
+    state->error_mask |= MAIL_ERROR_RESOURCE;
+    /* Update state->err in case we are past the client's DATA command. */
+    state->err |= CLEANUP_STAT_PROXY;
+    smtpd_proxy_fake_server_reply(state, CLEANUP_STAT_PROXY);
+    return (-1);
+}
+
+/* smtpd_proxy_rdwr_error - report proxy communication error */
+
+static int smtpd_proxy_rdwr_error(SMTPD_STATE *state, int err)
+{
+    const char *myname = "smtpd_proxy_rdwr_error";
+    SMTPD_PROXY *proxy = state->proxy;
+
+    /*
+     * Sanity check.
+     */
+    if (err != 0 && err != SMTP_ERR_NONE && proxy == 0)
+	msg_panic("%s: proxy error %d without proxy handle", myname, err);
+
+    /*
+     * Log an appropriate warning message.
+     */
+    switch (err) {
+    case 0:
+    case SMTP_ERR_NONE:
+	break;
+    case SMTP_ERR_EOF:
+	msg_warn("lost connection with proxy %s", proxy->service_name);
+	break;
+    case SMTP_ERR_TIME:
+	msg_warn("timeout talking to proxy %s", proxy->service_name);
+	break;
+    default:
+	msg_panic("%s: unknown proxy %s error %d",
+		  myname, proxy->service_name, err);
+    }
+
+    /*
+     * Set the appropriate flags and server reply.
+     */
+    state->error_mask |= MAIL_ERROR_SOFTWARE;
+    /* Update state->err in case we are past the client's DATA command. */
+    state->err |= CLEANUP_STAT_PROXY;
+    smtpd_proxy_fake_server_reply(state, CLEANUP_STAT_PROXY);
+    return (-1);
+}
+
+/* smtpd_proxy_replay_send - replay saved SMTP session from speed-match log */
+
+static int smtpd_proxy_replay_send(SMTPD_STATE *state)
+{
+    const char *myname = "smtpd_proxy_replay_send";
+    static VSTRING *replay_buf = 0;
+    SMTPD_PROXY *proxy = state->proxy;
+    int     rec_type;
+    int     expect = SMTPD_PROX_WANT_BAD;
+
+    /*
+     * Sanity check.
+     */
+    if (smtpd_proxy_replay_stream == 0)
+	msg_panic("%s: no before-queue filter speed-adjust log", myname);
+
+    /*
+     * Errors first.
+     */
+    if (vstream_ferror(smtpd_proxy_replay_stream)
+	|| vstream_feof(smtpd_proxy_replay_stream)
+	|| rec_put(smtpd_proxy_replay_stream, REC_TYPE_END, "", 0) != REC_TYPE_END
+	|| vstream_fflush(smtpd_proxy_replay_stream))
+	/* NOT: fsync(vstream_fileno(smtpd_proxy_replay_stream)) */
+	return (smtpd_proxy_replay_rdwr_error(state));
+
+    /*
+     * Delayed connection to the before-queue filter.
+     */
+    if (smtpd_proxy_connect(state) < 0)
+	return (-1);
+
+    /*
+     * Replay the speed-match log. We do sanity check record content, but we
+     * don't implement a protocol state engine here, since we are reading
+     * from a file that we just wrote ourselves.
+     * 
+     * This is different than the MailChannels patented solution that
+     * multiplexes a large number of slowed-down inbound connections over a
+     * small number of fast connections to a local MTA.
+     * 
+     * - MailChannels receives mail directly from the Internet. It uses one
+     * connection to the local MTA to reject invalid recipients before
+     * receiving the entire email message at reduced bit rates, and then uses
+     * a different connection to quickly deliver the message to the local
+     * MTA.
+     * 
+     * - Postfix receives mail directly from the Internet. The Postfix SMTP
+     * server rejects invalid recipients before receiving the entire message
+     * over the Internet, and then delivers the message quickly to a local
+     * SMTP-based content filter.
+     */
+    if (replay_buf == 0)
+	replay_buf = vstring_alloc(100);
+    if (vstream_fseek(smtpd_proxy_replay_stream, (off_t) 0, SEEK_SET) < 0)
+	return (smtpd_proxy_replay_rdwr_error(state));
+
+    for (;;) {
+	switch (rec_type = rec_get(smtpd_proxy_replay_stream, replay_buf,
+				   REC_FLAG_NONE)) {
+
+	    /*
+	     * Message content.
+	     */
+	case REC_TYPE_NORM:
+	case REC_TYPE_CONT:
+	    if (smtpd_proxy_rec_put(proxy->service_stream, rec_type,
+				    STR(replay_buf), LEN(replay_buf)) < 0)
+		return (-1);
+	    break;
+
+	    /*
+	     * Expected server reply type.
+	     */
+	case REC_TYPE_RCPT:
+	    if (!alldig(STR(replay_buf))
+		|| (expect = atoi(STR(replay_buf))) == SMTPD_PROX_WANT_BAD)
+		msg_panic("%s: malformed server reply type: %s",
+			  myname, STR(replay_buf));
+	    break;
+
+	    /*
+	     * Client command, or void. Bail out on the first negative proxy
+	     * response. This is OK, because the filter must use the same
+	     * reply code for all recipients of a multi-recipient message.
+	     */
+	case REC_TYPE_FROM:
+	    if (expect == SMTPD_PROX_WANT_BAD)
+		msg_panic("%s: missing server reply type", myname);
+	    if (smtpd_proxy_cmd(state, expect, "%s", STR(replay_buf)) < 0)
+		return (-1);
+	    expect = SMTPD_PROX_WANT_BAD;
+	    break;
+
+	    /*
+	     * Explicit end marker, instead of implicit EOF.
+	     */
+	case REC_TYPE_END:
+	    return (0);
+
+	    /*
+	     * Errors.
+	     */
+	case REC_TYPE_ERROR:
+	    return (smtpd_proxy_replay_rdwr_error(state));
+	default:
+	    msg_panic("%s: unexpected record type; %d", myname, rec_type);
+	}
+    }
+}
+
+/* smtpd_proxy_save_cmd - save SMTP command + expected response to replay log */
+
+static int PRINTFLIKE(3, 4) smtpd_proxy_save_cmd(SMTPD_STATE *state, int expect, const char *fmt,...)
+{
+    va_list ap;
+
+    /*
+     * Errors first.
+     */
+    if (vstream_ferror(smtpd_proxy_replay_stream)
+	|| vstream_feof(smtpd_proxy_replay_stream))
+	return (smtpd_proxy_replay_rdwr_error(state));
+
+    /*
+     * Save the expected reply first, so that the replayer can safely
+     * overwrite the input buffer with the command.
+     */
+    rec_fprintf(smtpd_proxy_replay_stream, REC_TYPE_RCPT, "%d", expect);
+
+    /*
+     * The command can be omitted at the start of an SMTP session. This is
+     * not documented as part of the official interface because it is used
+     * only internally to this module.
+     */
+
+    /*
+     * Save the command to the replay log, and send it to the before-queue
+     * filter after we have received the entire message.
+     */
+    va_start(ap, fmt);
+    rec_vfprintf(smtpd_proxy_replay_stream, REC_TYPE_FROM, fmt, ap);
+    va_end(ap);
+
+    /*
+     * If we just saved the "." command, replay the log.
+     */
+    return (strcmp(fmt, ".") ? 0 : smtpd_proxy_replay_send(state));
+}
+
+/* smtpd_proxy_cmd - send command to proxy, receive reply */
+
+static int smtpd_proxy_cmd(SMTPD_STATE *state, int expect, const char *fmt,...)
+{
+    SMTPD_PROXY *proxy = state->proxy;
+    va_list ap;
+    char   *cp;
+    int     last_char;
+    int     err = 0;
+    static VSTRING *buffer = 0;
+
+    /*
+     * Errors first. Be prepared for delayed errors from the DATA phase.
+     */
+    if (vstream_ferror(proxy->service_stream)
+	|| vstream_feof(proxy->service_stream)
+	|| (err = vstream_setjmp(proxy->service_stream)) != 0) {
+	return (smtpd_proxy_rdwr_error(state, err));
+    }
+
+    /*
+     * Format the command.
+     */
+    va_start(ap, fmt);
+    vstring_vsprintf(proxy->request, fmt, ap);
+    va_end(ap);
+
+    /*
+     * The command can be omitted at the start of an SMTP session. This is
+     * not documented as part of the official interface because it is used
+     * only internally to this module.
+     */
+    if (LEN(proxy->request) > 0) {
+
+	/*
+	 * Optionally log the command first, so that we can see in the log
+	 * what the program is trying to do.
+	 */
+	if (msg_verbose)
+	    msg_info("> %s: %s", proxy->service_name, STR(proxy->request));
+
+	/*
+	 * Send the command to the proxy server. Since we're going to read a
+	 * reply immediately, there is no need to flush buffers.
+	 */
+	smtp_fputs(STR(proxy->request), LEN(proxy->request),
+		   proxy->service_stream);
+    }
+
+    /*
+     * Early return if we don't want to wait for a server reply (such as
+     * after sending QUIT).
+     */
+    if (expect == SMTPD_PROX_WANT_NONE)
+	return (0);
+
+    /*
+     * Censor out non-printable characters in server responses and save
+     * complete multi-line responses if possible.
+     * 
+     * We can't parse or store input that exceeds var_line_limit, so we just
+     * skip over it to simplify the remainder of the code below.
+     */
+    VSTRING_RESET(proxy->reply);
+    if (buffer == 0)
+	buffer = vstring_alloc(10);
+    for (;;) {
+	last_char = smtp_get(buffer, proxy->service_stream, var_line_limit,
+			     SMTP_GET_FLAG_SKIP);
+	printable(STR(buffer), '?');
+	if (last_char != '\n')
+	    msg_warn("%s: response longer than %d: %.30s...",
+		     proxy->service_name, var_line_limit,
+		     STR(buffer));
+	if (msg_verbose)
+	    msg_info("< %s: %.100s", proxy->service_name, STR(buffer));
+
+	/*
+	 * Defend against a denial of service attack by limiting the amount
+	 * of multi-line text that we are willing to store.
+	 */
+	if (LEN(proxy->reply) < var_line_limit) {
+	    if (VSTRING_LEN(proxy->reply))
+		vstring_strcat(proxy->reply, "\r\n");
+	    vstring_strcat(proxy->reply, STR(buffer));
+	}
+
+	/*
+	 * Parse the response into code and text. Ignore unrecognized
+	 * garbage. This means that any character except space (or end of
+	 * line) will have the same effect as the '-' line continuation
+	 * character.
+	 */
+	for (cp = STR(buffer); *cp && ISDIGIT(*cp); cp++)
+	     /* void */ ;
+	if (cp - STR(buffer) == 3) {
+	    if (*cp == '-')
+		continue;
+	    if (*cp == ' ' || *cp == 0)
+		break;
+	}
+	msg_warn("received garbage from proxy %s: %.100s",
+		 proxy->service_name, STR(buffer));
+    }
+
+    /*
+     * Log a warning in case the proxy does not send the expected response.
+     * Silently accept any response when the client expressed no expectation.
+     * 
+     * Starting with Postfix 2.6 we don't pass through unexpected 2xx or 3xx
+     * proxy replies. They are a source of support problems, so we replace
+     * them by generic server error replies.
+     */
+    if (expect != SMTPD_PROX_WANT_ANY && expect != *STR(proxy->reply)) {
+	msg_warn("proxy %s rejected \"%s\": \"%s\"",
+		 proxy->service_name, LEN(proxy->request) == 0 ?
+		 "connection request" : STR(proxy->request),
+		 STR(proxy->reply));
+	if (*STR(proxy->reply) == SMTPD_PROX_WANT_OK
+	    || *STR(proxy->reply) == SMTPD_PROX_WANT_MORE) {
+	    smtpd_proxy_rdwr_error(state, 0);
+	}
+	return (-1);
+    } else {
+	return (0);
+    }
+}
+
+/* smtpd_proxy_save_rec_put - save message content to replay log */
+
+static int smtpd_proxy_save_rec_put(VSTREAM *stream, int rec_type,
+				            const char *data, ssize_t len)
+{
+    const char *myname = "smtpd_proxy_save_rec_put";
+    int     ret;
+
+#define VSTREAM_TO_SMTPD_STATE(s) ((SMTPD_STATE *) vstream_context(s))
+
+    /*
+     * Sanity check.
+     */
+    if (stream == 0)
+	msg_panic("%s: attempt to use closed stream", myname);
+
+    /*
+     * Send one content record. Errors and results must be as with rec_put().
+     */
+    if (rec_type == REC_TYPE_NORM || rec_type == REC_TYPE_CONT)
+	ret = rec_put(stream, rec_type, data, len);
+    else
+	msg_panic("%s: need REC_TYPE_NORM or REC_TYPE_CONT", myname);
+
+    /*
+     * Errors last.
+     */
+    if (ret != rec_type) {
+	(void) smtpd_proxy_replay_rdwr_error(VSTREAM_TO_SMTPD_STATE(stream));
+	return (REC_TYPE_ERROR);
+    }
+    return (rec_type);
+}
+
+/* smtpd_proxy_rec_put - send message content, rec_put() clone */
+
+static int smtpd_proxy_rec_put(VSTREAM *stream, int rec_type,
+			               const char *data, ssize_t len)
+{
+    const char *myname = "smtpd_proxy_rec_put";
+    int     err = 0;
+
+    /*
+     * Errors first.
+     */
+    if (vstream_ferror(stream) || vstream_feof(stream)
+	|| (err = vstream_setjmp(stream)) != 0) {
+	(void) smtpd_proxy_rdwr_error(VSTREAM_TO_SMTPD_STATE(stream), err);
+	return (REC_TYPE_ERROR);
+    }
+
+    /*
+     * Send one content record. Errors and results must be as with rec_put().
+     */
+    if (rec_type == REC_TYPE_NORM)
+	smtp_fputs(data, len, stream);
+    else if (rec_type == REC_TYPE_CONT)
+	smtp_fwrite(data, len, stream);
+    else
+	msg_panic("%s: need REC_TYPE_NORM or REC_TYPE_CONT", myname);
+    return (rec_type);
+}
+
+/* smtpd_proxy_save_rec_fprintf - save message content to replay log */
+
+static int smtpd_proxy_save_rec_fprintf(VSTREAM *stream, int rec_type,
+					        const char *fmt,...)
+{
+    const char *myname = "smtpd_proxy_save_rec_fprintf";
+    va_list ap;
+    int     ret;
+
+    /*
+     * Sanity check.
+     */
+    if (stream == 0)
+	msg_panic("%s: attempt to use closed stream", myname);
+
+    /*
+     * Save one content record. Errors and results must be as with
+     * rec_fprintf().
+     */
+    va_start(ap, fmt);
+    if (rec_type == REC_TYPE_NORM)
+	ret = rec_vfprintf(stream, rec_type, fmt, ap);
+    else
+	msg_panic("%s: need REC_TYPE_NORM", myname);
+    va_end(ap);
+
+    /*
+     * Errors last.
+     */
+    if (ret != rec_type) {
+	(void) smtpd_proxy_replay_rdwr_error(VSTREAM_TO_SMTPD_STATE(stream));
+	return (REC_TYPE_ERROR);
+    }
+    return (rec_type);
+}
+
+/* smtpd_proxy_rec_fprintf - send message content, rec_fprintf() clone */
+
+static int smtpd_proxy_rec_fprintf(VSTREAM *stream, int rec_type,
+				           const char *fmt,...)
+{
+    const char *myname = "smtpd_proxy_rec_fprintf";
+    va_list ap;
+    int     err = 0;
+
+    /*
+     * Errors first.
+     */
+    if (vstream_ferror(stream) || vstream_feof(stream)
+	|| (err = vstream_setjmp(stream)) != 0) {
+	(void) smtpd_proxy_rdwr_error(VSTREAM_TO_SMTPD_STATE(stream), err);
+	return (REC_TYPE_ERROR);
+    }
+
+    /*
+     * Send one content record. Errors and results must be as with
+     * rec_fprintf().
+     */
+    va_start(ap, fmt);
+    if (rec_type == REC_TYPE_NORM)
+	smtp_vprintf(stream, fmt, ap);
+    else
+	msg_panic("%s: need REC_TYPE_NORM", myname);
+    va_end(ap);
+    return (rec_type);
+}
+
+#ifndef NO_TRUNCATE
+
+/* smtpd_proxy_replay_setup - prepare the replay logfile */
+
+static int smtpd_proxy_replay_setup(SMTPD_STATE *state)
+{
+    const char *myname = "smtpd_proxy_replay_setup";
+    off_t   file_offs;
+
+    /*
+     * Where possible reuse an existing replay logfile, because creating a
+     * file is expensive compared to reading or writing. For security reasons
+     * we must truncate the file before reuse. For performance reasons we
+     * should truncate the file immediately after the end of a mail
+     * transaction. We enforce the security guarantee upon reuse, by
+     * requiring that no I/O happened since the file was truncated. This is
+     * less expensive than truncating the file redundantly.
+     */
+    if (smtpd_proxy_replay_stream != 0) {
+	/* vstream_ftell() won't invoke the kernel, so all errors are mine. */
+	if ((file_offs = vstream_ftell(smtpd_proxy_replay_stream)) != 0)
+	    msg_panic("%s: bad before-queue filter speed-adjust log offset %lu",
+		      myname, (unsigned long) file_offs);
+	vstream_clearerr(smtpd_proxy_replay_stream);
+	if (msg_verbose)
+	    msg_info("%s: reuse speed-adjust stream fd=%d", myname,
+		     vstream_fileno(smtpd_proxy_replay_stream));
+	/* Here, smtpd_proxy_replay_stream != 0 */
+    }
+
+    /*
+     * Create a new replay logfile.
+     */
+    if (smtpd_proxy_replay_stream == 0) {
+	smtpd_proxy_replay_stream = mail_queue_enter(MAIL_QUEUE_INCOMING, 0,
+						     (struct timeval *) 0);
+	if (smtpd_proxy_replay_stream == 0)
+	    return (smtpd_proxy_replay_rdwr_error(state));
+	if (unlink(VSTREAM_PATH(smtpd_proxy_replay_stream)) < 0)
+	    msg_warn("remove before-queue filter speed-adjust log %s: %m",
+		     VSTREAM_PATH(smtpd_proxy_replay_stream));
+	if (msg_verbose)
+	    msg_info("%s: new speed-adjust stream fd=%d", myname,
+		     vstream_fileno(smtpd_proxy_replay_stream));
+    }
+
+    /*
+     * Needed by our DATA-phase record emulation routines.
+     */
+    vstream_control(smtpd_proxy_replay_stream,
+		    CA_VSTREAM_CTL_CONTEXT((void *) state),
+		    CA_VSTREAM_CTL_END);
+    return (0);
+}
+
+#endif
+
+/* smtpd_proxy_create - set up smtpd proxy handle */
+
+int     smtpd_proxy_create(SMTPD_STATE *state, int flags, const char *service,
+			           int timeout, const char *ehlo_name,
+			           const char *mail_from)
+{
+    SMTPD_PROXY *proxy;
+
+    /*
+     * When an operation has many arguments it is safer to use named
+     * parameters, and have the compiler enforce the argument count.
+     */
+#define SMTPD_PROXY_ALLOC(p, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, a11, a12) \
+	((p) = (SMTPD_PROXY *) mymalloc(sizeof(*(p))), (p)->a1, (p)->a2, \
+	 (p)->a3, (p)->a4, (p)->a5, (p)->a6, (p)->a7, (p)->a8, (p)->a9, \
+	 (p)->a10, (p)->a11, (p)->a12, (p))
+
+    /*
+     * Sanity check.
+     */
+    if (state->proxy != 0)
+	msg_panic("smtpd_proxy_create: handle still exists");
+
+    /*
+     * Connect to the before-queue filter immediately.
+     */
+    if ((flags & SMTPD_PROXY_FLAG_SPEED_ADJUST) == 0) {
+	state->proxy =
+	    SMTPD_PROXY_ALLOC(proxy, stream = 0, request = vstring_alloc(10),
+			      reply = vstring_alloc(10),
+			      cmd = smtpd_proxy_cmd,
+			      rec_fprintf = smtpd_proxy_rec_fprintf,
+			      rec_put = smtpd_proxy_rec_put,
+			      flags = flags, service_stream = 0,
+			      service_name = service, timeout = timeout,
+			      ehlo_name = ehlo_name, mail_from = mail_from);
+	if (smtpd_proxy_connect(state) < 0) {
+	    /* NOT: smtpd_proxy_free(state); we still need proxy->reply. */
+	    return (-1);
+	}
+	proxy->stream = proxy->service_stream;
+	return (0);
+    }
+
+    /*
+     * Connect to the before-queue filter after we receive the entire
+     * message. Open the replay logfile early to simplify code. The file is
+     * reused for multiple mail transactions, so there is no need to minimize
+     * its life time.
+     */
+    else {
+#ifdef NO_TRUNCATE
+	msg_panic("smtpd_proxy_create: speed-adjust support is not available");
+#else
+	if (smtpd_proxy_replay_setup(state) < 0)
+	    return (-1);
+	state->proxy =
+	    SMTPD_PROXY_ALLOC(proxy, stream = smtpd_proxy_replay_stream,
+			      request = vstring_alloc(10),
+			      reply = vstring_alloc(10),
+			      cmd = smtpd_proxy_save_cmd,
+			      rec_fprintf = smtpd_proxy_save_rec_fprintf,
+			      rec_put = smtpd_proxy_save_rec_put,
+			      flags = flags, service_stream = 0,
+			      service_name = service, timeout = timeout,
+			      ehlo_name = ehlo_name, mail_from = mail_from);
+	return (0);
+#endif
+    }
+}
+
+/* smtpd_proxy_close - close proxy connection without destroying handle */
+
+void    smtpd_proxy_close(SMTPD_STATE *state)
+{
+    SMTPD_PROXY *proxy = state->proxy;
+
+    /*
+     * Specify SMTPD_PROX_WANT_NONE so that the server reply will not clobber
+     * the END-OF-DATA reply.
+     */
+    if (proxy->service_stream != 0) {
+	if (vstream_feof(proxy->service_stream) == 0
+	    && vstream_ferror(proxy->service_stream) == 0)
+	    (void) smtpd_proxy_cmd(state, SMTPD_PROX_WANT_NONE,
+				   SMTPD_CMD_QUIT);
+	(void) vstream_fclose(proxy->service_stream);
+	if (proxy->stream == proxy->service_stream)
+	    proxy->stream = 0;
+	proxy->service_stream = 0;
+    }
+}
+
+/* smtpd_proxy_free - destroy smtpd proxy handle */
+
+void    smtpd_proxy_free(SMTPD_STATE *state)
+{
+    SMTPD_PROXY *proxy = state->proxy;
+
+    /*
+     * Clean up.
+     */
+    if (proxy->service_stream != 0)
+	(void) smtpd_proxy_close(state);
+    if (proxy->request != 0)
+	vstring_free(proxy->request);
+    if (proxy->reply != 0)
+	vstring_free(proxy->reply);
+    myfree((void *) proxy);
+    state->proxy = 0;
+
+    /*
+     * Reuse the replay logfile if possible. For security reasons we must
+     * truncate the replay logfile before reuse. For performance reasons we
+     * should truncate the replay logfile immediately after the end of a mail
+     * transaction. We truncate the file here, and enforce the security
+     * guarantee by requiring that no I/O happens before the file is reused.
+     */
+    if (smtpd_proxy_replay_stream == 0)
+	return;
+    if (vstream_ferror(smtpd_proxy_replay_stream)) {
+	/* Errors are already reported. */
+	(void) vstream_fclose(smtpd_proxy_replay_stream);
+	smtpd_proxy_replay_stream = 0;
+	return;
+    }
+    /* Flush output from aborted transaction before truncating the file!! */
+    if (vstream_fseek(smtpd_proxy_replay_stream, (off_t) 0, SEEK_SET) < 0) {
+	msg_warn("seek before-queue filter speed-adjust log: %m");
+	(void) vstream_fclose(smtpd_proxy_replay_stream);
+	smtpd_proxy_replay_stream = 0;
+	return;
+    }
+    if (ftruncate(vstream_fileno(smtpd_proxy_replay_stream), (off_t) 0) < 0) {
+	msg_warn("truncate before-queue filter speed-adjust log: %m");
+	(void) vstream_fclose(smtpd_proxy_replay_stream);
+	smtpd_proxy_replay_stream = 0;
+	return;
+    }
+}
+
+/* smtpd_proxy_parse_opts - parse main.cf options */
+
+int     smtpd_proxy_parse_opts(const char *param_name, const char *param_val)
+{
+    static const NAME_MASK proxy_opts_table[] = {
+	SMTPD_PROXY_NAME_SPEED_ADJUST, SMTPD_PROXY_FLAG_SPEED_ADJUST,
+	0, 0,
+    };
+    int     flags;
+
+    /*
+     * The optional before-filter speed-adjust buffers use disk space.
+     * However, we don't know if they compete for storage space with the
+     * after-filter queue, so we can't simply bump up the free space
+     * requirement to 2.5 * message_size_limit.
+     */
+    flags = name_mask(param_name, proxy_opts_table, param_val);
+    if (flags & SMTPD_PROXY_FLAG_SPEED_ADJUST) {
+#ifdef NO_TRUNCATE
+	msg_warn("smtpd_proxy %s support is not available",
+		 SMTPD_PROXY_NAME_SPEED_ADJUST);
+	flags &= ~SMTPD_PROXY_FLAG_SPEED_ADJUST;
+#endif
+    }
+    return (flags);
+}