diff options
Diffstat (limited to 'README_FILES/BASIC_CONFIGURATION_README')
| -rw-r--r-- | README_FILES/BASIC_CONFIGURATION_README | 489 |
1 files changed, 489 insertions, 0 deletions
diff --git a/README_FILES/BASIC_CONFIGURATION_README b/README_FILES/BASIC_CONFIGURATION_README new file mode 100644 index 0000000..4bc4d84 --- /dev/null +++ b/README_FILES/BASIC_CONFIGURATION_README @@ -0,0 +1,489 @@ +PPoossttffiixx BBaassiicc CCoonnffiigguurraattiioonn + +------------------------------------------------------------------------------- + +IInnttrroodduuccttiioonn + +Postfix has several hundred configuration parameters that are controlled via +the main.cf file. Fortunately, all parameters have sensible default values. In +many cases, you need to configure only two or three parameters before you can +start to play with the mail system. Here's a quick introduction to the syntax: + + * Postfix configuration files + +The text below assumes that you already have Postfix installed on the system, +either by compiling the source code yourself (as described in the INSTALL file) +or by installing an already compiled version. + +This document covers basic Postfix configuration. Information about how to +configure Postfix for specific applications such as mailhub, firewall or dial- +up client can be found in the STANDARD_CONFIGURATION_README file. But don't go +there until you already have covered the material presented below. + +The first parameters of interest specify the machine's identity and role in the +network. + + * What domain name to use in outbound mail + + * What domains to receive mail for + + * What clients to relay mail from + + * What destinations to relay mail to + + * What delivery method: direct or indirect + +The default values for many other configuration parameters are derived from +just these. + +The next parameter of interest controls the amount of mail sent to the local +postmaster: + + * What trouble to report to the postmaster + +Be sure to set the following correctly if you're behind a proxy or network +address translator, and you are running a backup MX host for some other domain: + + * Proxy/NAT external network addresses + +Postfix daemon processes run in the background, and log problems and normal +activity to the syslog daemon. Here are a few things that you need to be aware +of: + + * What you need to know about Postfix logging + +If your machine has unusual security requirements you may want to run Postfix +daemon processes inside a chroot environment. + + * Running Postfix daemon processes chrooted + +If you run Postfix on a virtual network interface, or if your machine runs +other mailers on virtual interfaces, you'll have to look at the other +parameters listed here as well: + + * My own hostname + + * My own domain name + + * My own network addresses + +PPoossttffiixx ccoonnffiigguurraattiioonn ffiilleess + +By default, Postfix configuration files are in /etc/postfix. The two most +important files are main.cf and master.cf; these files must be owned by root. +Giving someone else write permission to main.cf or master.cf (or to their +parent directories) means giving root privileges to that person. + +In /etc/postfix/main.cf you will have to set up a minimal number of +configuration parameters. Postfix configuration parameters resemble shell +variables, with two important differences: the first one is that Postfix does +not know about quotes like the UNIX shell does. + +You specify a configuration parameter as: + + /etc/postfix/main.cf: + parameter = value + +and you use it by putting a "$" character in front of its name: + + /etc/postfix/main.cf: + other_parameter = $parameter + +You can use $parameter before it is given a value (that is the second main +difference with UNIX shell variables). The Postfix configuration language uses +lazy evaluation, and does not look at a parameter value until it is needed at +runtime. + +Postfix uses database files for access control, address rewriting and other +purposes. The DATABASE_README file gives an introduction to how Postfix works +with Berkeley DB, LDAP or SQL and other types. Here is a common example of how +Postfix invokes a database: + + /etc/postfix/main.cf: + virtual_alias_maps = hash:/etc/postfix/virtual + +Whenever you make a change to the main.cf or master.cf file, execute the +following command as root in order to refresh a running mail system: + + # postfix reload + +WWhhaatt ddoommaaiinn nnaammee ttoo uussee iinn oouuttbboouunndd mmaaiill + +The myorigin parameter specifies the domain that appears in mail that is posted +on this machine. The default is to use the local machine name, $myhostname, +which defaults to the name of the machine. Unless you are running a really +small site, you probably want to change that into $mydomain, which defaults to +the parent domain of the machine name. + +For the sake of consistency between sender and recipient addresses, myorigin +also specifies the domain name that is appended to an unqualified recipient +address. + +Examples (specify only one of the following): + + /etc/postfix/main.cf: + myorigin = $myhostname (default: send mail as "user@$myhostname") + myorigin = $mydomain (probably desirable: "user@$mydomain") + +WWhhaatt ddoommaaiinnss ttoo rreecceeiivvee mmaaiill ffoorr + +The mydestination parameter specifies what domains this machine will deliver +locally, instead of forwarding to another machine. The default is to receive +mail for the machine itself. See the VIRTUAL_README file for how to configure +Postfix for hosted domains. + +You can specify zero or more domain names, "/file/name" patterns and/or "type: +table" lookup tables (such as hash:, btree:, nis:, ldap:, or mysql:), separated +by whitespace and/or commas. A "/file/name" pattern is replaced by its +contents; "type:table" requests that a table lookup is done and merely tests +for existence: the lookup result is ignored. + +IMPORTANT: If your machine is a mail server for its entire domain, you must +list $mydomain as well. + +Example 1: default setting. + + /etc/postfix/main.cf: + mydestination = $myhostname localhost.$mydomain localhost + +Example 2: domain-wide mail server. + + /etc/postfix/main.cf: + mydestination = $myhostname localhost.$mydomain localhost $mydomain + +Example 3: host with multiple DNS A records. + + /etc/postfix/main.cf: + mydestination = $myhostname localhost.$mydomain localhost + www.$mydomain ftp.$mydomain + +Caution: in order to avoid mail delivery loops, you must list all hostnames of +the machine, including $myhostname, and localhost.$mydomain. + +WWhhaatt cclliieennttss ttoo rreellaayy mmaaiill ffrroomm + +By default, Postfix will forward mail from clients in authorized network blocks +to any destination. Authorized networks are defined with the mynetworks +configuration parameter. The current default is to authorize the local machine +only. Prior to Postfix 3.0, the default was to authorize all clients in the IP +subnetworks that the local machine is attached to. + +Postfix can also be configured to relay mail from "mobile" clients that send +mail from outside an authorized network block. This is explained in the +SASL_README and TLS_README documents. + +IMPORTANT: If your machine is connected to a wide area network then the +"mynetworks_style = subnet" setting may be too friendly. + +Examples (specify only one of the following): + + /etc/postfix/main.cf: + mynetworks_style = subnet (not safe on a wide area network) + mynetworks_style = host (authorize local machine only) + mynetworks = 127.0.0.0/8 (authorize local machine only) + mynetworks = 127.0.0.0/8 168.100.189.2/32 (authorize local machine) + mynetworks = 127.0.0.0/8 168.100.189.2/28 (authorize local networks) + +You can specify the trusted networks in the main.cf file, or you can let +Postfix do the work for you. The default is to let Postfix do the work. The +result depends on the mynetworks_style parameter value. + + * Specify "mynetworks_style = host" (the default when compatibility_level >= + 2) when Postfix should forward mail from only the local machine. + + * Specify "mynetworks_style = subnet" (the default when compatibility_level < + 2) when Postfix should forward mail from SMTP clients in the same IP + subnetworks as the local machine. On Linux, this works correctly only with + interfaces specified with the "ifconfig" or "ip" command. + + * Specify "mynetworks_style = class" when Postfix should forward mail from + SMTP clients in the same IP class A/B/C networks as the local machine. + Don't do this with a dialup site - it would cause Postfix to "trust" your + entire provider's network. Instead, specify an explicit mynetworks list by + hand, as described below. + +Alternatively, you can specify the mynetworks list by hand, in which case +Postfix ignores the mynetworks_style setting. To specify the list of trusted +networks by hand, specify network blocks in CIDR (network/mask) notation, for +example: + + /etc/postfix/main.cf: + mynetworks = 168.100.189.0/28, 127.0.0.0/8 + +You can also specify the absolute pathname of a pattern file instead of listing +the patterns in the main.cf file. + +WWhhaatt ddeessttiinnaattiioonnss ttoo rreellaayy mmaaiill ttoo + +By default, Postfix will forward mail from strangers (clients outside +authorized networks) to authorized remote destinations only. Authorized remote +destinations are defined with the relay_domains configuration parameter. The +default is to authorize all domains (and subdomains) of the domains listed with +the mydestination parameter. + +Examples (specify only one of the following): + + /etc/postfix/main.cf: + relay_domains = $mydestination (default) + relay_domains = (safe: never forward mail from strangers) + relay_domains = $mydomain (forward mail to my domain and subdomains) + +WWhhaatt ddeelliivveerryy mmeetthhoodd:: ddiirreecctt oorr iinnddiirreecctt + +By default, Postfix tries to deliver mail directly to the Internet. Depending +on your local conditions this may not be possible or desirable. For example, +your system may be turned off outside office hours, it may be behind a +firewall, or it may be connected via a provider who does not allow direct mail +to the Internet. In those cases you need to configure Postfix to deliver mail +indirectly via a relay host. + +Examples (specify only one of the following): + + /etc/postfix/main.cf: + relayhost = (default: direct delivery to Internet) + relayhost = $mydomain (deliver via local mailhub) + relayhost = [mail.$mydomain] (deliver via local mailhub) + relayhost = [mail.isp.tld] (deliver via provider mailhub) + +The form enclosed with [] eliminates DNS MX lookups. Don't worry if you don't +know what that means. Just be sure to specify the [] around the mailhub +hostname that your ISP gave to you, otherwise mail may be mis-delivered. + +The STANDARD_CONFIGURATION_README file has more hints and tips for firewalled +and/or dial-up networks. + +WWhhaatt ttrroouubbllee ttoo rreeppoorrtt ttoo tthhee ppoossttmmaasstteerr + +You should set up a postmaster alias in the aliases(5) table that directs mail +to a human person. The postmaster address is required to exist, so that people +can report mail delivery problems. While you're updating the aliases(5) table, +be sure to direct mail for the super-user to a human person too. + + /etc/aliases: + postmaster: you + root: you + +Execute the command "newaliases" after changing the aliases file. Instead of / +etc/aliases, your alias file may be located elsewhere. Use the command +"postconf alias_maps" to find out. + +The Postfix system reports problems to the postmaster alias. You may not be +interested in all types of trouble reports, so this reporting mechanism is +configurable. The default is to report only serious problems (resource, +software) to postmaster: + +Default setting: + + /etc/postfix/main.cf: + notify_classes = resource, software + +The meaning of the classes is as follows: + + bounce + Inform the postmaster of undeliverable mail. Either send the postmaster + a copy of undeliverable mail that is returned to the sender, or send a + transcript of the SMTP session when Postfix rejected mail. For privacy + reasons, the postmaster copy of undeliverable mail is truncated after + the original message headers. This implies "2bounce" (see below). See + also the luser_relay feature. The notification is sent to the address + specified with the bounce_notice_recipient configuration parameter + (default: postmaster). + 2bounce + When Postfix is unable to return undeliverable mail to the sender, send + it to the postmaster instead (without truncating the message after the + primary headers). The notification is sent to the address specified + with the 2bounce_notice_recipient configuration parameter (default: + postmaster). + delay + Inform the postmaster of delayed mail. In this case, the postmaster + receives message headers only. The notification is sent to the address + specified with the delay_notice_recipient configuration parameter + (default: postmaster). + policy + Inform the postmaster of client requests that were rejected because of + (UCE) policy restrictions. The postmaster receives a transcript of the + SMTP session. The notification is sent to the address specified with + the error_notice_recipient configuration parameter (default: + postmaster). + protocol + Inform the postmaster of protocol errors (client or server side) or + attempts by a client to execute unimplemented commands. The postmaster + receives a transcript of the SMTP session. The notification is sent to + the address specified with the error_notice_recipient configuration + parameter (default: postmaster). + resource + Inform the postmaster of mail not delivered due to resource problems + (for example, queue file write errors). The notification is sent to the + address specified with the error_notice_recipient configuration + parameter (default: postmaster). + software + Inform the postmaster of mail not delivered due to software problems. + The notification is sent to the address specified with the + error_notice_recipient configuration parameter (default: postmaster). + +PPrrooxxyy//NNAATT eexxtteerrnnaall nneettwwoorrkk aaddddrreesssseess + +Some mail servers are connected to the Internet via a network address +translator (NAT) or proxy. This means that systems on the Internet connect to +the address of the NAT or proxy, instead of connecting to the network address +of the mail server. The NAT or proxy forwards the connection to the network +address of the mail server, but Postfix does not know this. + +If you run a Postfix server behind a proxy or NAT, you need to configure the +proxy_interfaces parameter and specify all the external proxy or NAT addresses +that Postfix receives mail on. You may specify symbolic hostnames instead of +network addresses. + +IMPORTANT: You must specify your proxy/NAT external addresses when your system +is a backup MX host for other domains, otherwise mail delivery loops will +happen when the primary MX host is down. + +Example: host behind NAT box running a backup MX host. + + /etc/postfix/main.cf: + proxy_interfaces = 1.2.3.4 (the proxy/NAT external network address) + +WWhhaatt yyoouu nneeeedd ttoo kknnooww aabboouutt PPoossttffiixx llooggggiinngg + +Postfix daemon processes run in the background, and log problems and normal +activity to the syslog daemon. The syslogd process sorts events by class and +severity, and appends them to logfiles. The logging classes, levels and logfile +names are usually specified in /etc/syslog.conf. At the very least you need +something like: + + /etc/syslog.conf: + mail.err /dev/console + mail.debug /var/log/maillog + +After changing the syslog.conf file, send a "HUP" signal to the syslogd +process. + +IMPORTANT: many syslogd implementations will not create files. You must create +files before (re)starting syslogd. + +IMPORTANT: on Linux you need to put a "-" character before the pathname, e.g., +-/var/log/maillog, otherwise the syslogd process will use more system resources +than Postfix. + +Hopefully, the number of problems will be small, but it is a good idea to run +every night before the syslog files are rotated: + + # postfix check + # egrep '(reject|warning|error|fatal|panic):' /some/log/file + + * The first line (postfix check) causes Postfix to report file permission/ + ownership discrepancies. + + * The second line looks for problem reports from the mail software, and + reports how effective the relay and junk mail access blocks are. This may + produce a lot of output. You will want to apply some postprocessing to + eliminate uninteresting information. + +The DEBUG_README document describes the meaning of the "warning" etc. labels in +Postfix logging. + +RRuunnnniinngg PPoossttffiixx ddaaeemmoonn pprroocceesssseess cchhrrooootteedd + +Postfix daemon processes can be configured (via the master.cf file) to run in a +chroot jail. The processes run at a fixed low privilege and with file system +access limited to the Postfix queue directories (/var/spool/postfix). This +provides a significant barrier against intrusion. The barrier is not +impenetrable (chroot limits file system access only), but every little bit +helps. + +With the exception of Postfix daemons that deliver mail locally and/or that +execute non-Postfix commands, every Postfix daemon can run chrooted. + +Sites with high security requirements should consider to chroot all daemons +that talk to the network: the smtp(8) and smtpd(8) processes, and perhaps also +the lmtp(8) client. The author's own porcupine.org mail server runs all daemons +chrooted that can be chrooted. + +The default /etc/postfix/master.cf file specifies that no Postfix daemon runs +chrooted. In order to enable chroot operation, edit the file /etc/postfix/ +master.cf, and follow instructions in the file. When you're finished, execute +"postfix reload" to make the change effective. + +Note that a chrooted daemon resolves all filenames relative to the Postfix +queue directory (/var/spool/postfix). For successful use of a chroot jail, most +UNIX systems require you to bring in some files or device nodes. The examples/ +chroot-setup directory in the source code distribution has a collection of +scripts that help you set up Postfix chroot environments on different operating +systems. + +Additionally, you almost certainly need to configure syslogd so that it listens +on a socket inside the Postfix queue directory. Examples of syslogd command +line options that achieve this for specific systems: + +FreeBSD: syslogd -l /var/spool/postfix/var/run/log + +Linux, OpenBSD: syslogd -a /var/spool/postfix/dev/log + +MMyy oowwnn hhoossttnnaammee + +The myhostname parameter specifies the fully-qualified domain name of the +machine running the Postfix system. $myhostname appears as the default value in +many other Postfix configuration parameters. + +By default, myhostname is set to the local machine name. If your local machine +name is not in fully-qualified domain name form, or if you run Postfix on a +virtual interface, you will have to specify the fully-qualified domain name +that the mail system should use. + +Alternatively, if you specify mydomain in main.cf, then Postfix will use its +value to generate a fully-qualified default value for the myhostname parameter. + +Examples (specify only one of the following): + + /etc/postfix/main.cf: + myhostname = host.local.domain (machine name is not FQDN) + myhostname = host.virtual.domain (virtual interface) + myhostname = virtual.domain (virtual interface) + +MMyy oowwnn ddoommaaiinn nnaammee + +The mydomain parameter specifies the parent domain of $myhostname. By default, +it is derived from $myhostname by stripping off the first part (unless the +result would be a top-level domain). + +Conversely, if you specify mydomain in main.cf, then Postfix will use its value +to generate a fully-qualified default value for the myhostname parameter. + +Examples (specify only one of the following): + + /etc/postfix/main.cf: + mydomain = local.domain + mydomain = virtual.domain (virtual interface) + +MMyy oowwnn nneettwwoorrkk aaddddrreesssseess + +The inet_interfaces parameter specifies all network interface addresses that +the Postfix system should listen on; mail addressed to "user@[network address]" +will be delivered locally, as if it is addressed to a domain listed in +$mydestination. + +You can override the inet_interfaces setting in the Postfix master.cf file by +prepending an IP address to a server name. + +The default is to listen on all active interfaces. If you run mailers on +virtual interfaces, you will have to specify what interfaces to listen on. + +IMPORTANT: If you run MTAs on virtual interfaces you must specify explicit +inet_interfaces values for the MTA that receives mail for the machine itself: +this MTA should never listen on the virtual interfaces or you would have a +mailer loop when a virtual MTA is down. + +Example: default setting. + + /etc/postfix/main.cf: + inet_interfaces = all + +Example: host running one or more virtual mailers. For each Postfix instance, +specify only one of the following. + + /etc/postfix/main.cf: + inet_interfaces = virtual.host.tld (virtual Postfix) + inet_interfaces = $myhostname localhost... (non-virtual Postfix) + +Note: you need to stop and start Postfix after changing this parameter. + |