diff options
Diffstat (limited to 'man/man8/anvil.8')
| -rw-r--r-- | man/man8/anvil.8 | 302 |
1 files changed, 302 insertions, 0 deletions
diff --git a/man/man8/anvil.8 b/man/man8/anvil.8 new file mode 100644 index 0000000..89ea9a6 --- /dev/null +++ b/man/man8/anvil.8 @@ -0,0 +1,302 @@ +.TH ANVIL 8 +.ad +.fi +.SH NAME +anvil +\- +Postfix session count and request rate control +.SH "SYNOPSIS" +.na +.nf +\fBanvil\fR [generic Postfix daemon options] +.SH DESCRIPTION +.ad +.fi +The Postfix \fBanvil\fR(8) server maintains statistics about +client connection counts or client request rates. This +information can be used to defend against clients that +hammer a server with either too many simultaneous sessions, +or with too many successive requests within a configurable +time interval. This server is designed to run under control +by the Postfix \fBmaster\fR(8) server. + +In the following text, \fBident\fR specifies a (service, +client) combination. The exact syntax of that information +is application\-dependent; the \fBanvil\fR(8) server does +not care. +.SH "CONNECTION COUNT/RATE CONTROL" +.na +.nf +.ad +.fi +To register a new connection send the following request to +the \fBanvil\fR(8) server: + +.nf + \fBrequest=connect\fR + \fBident=\fIstring\fR +.fi + +The \fBanvil\fR(8) server answers with the number of +simultaneous connections and the number of connections per +unit time for the (service, client) combination specified +with \fBident\fR: + +.nf + \fBstatus=0\fR + \fBcount=\fInumber\fR + \fBrate=\fInumber\fR +.fi + +To register a disconnect event send the following request +to the \fBanvil\fR(8) server: + +.nf + \fBrequest=disconnect\fR + \fBident=\fIstring\fR +.fi + +The \fBanvil\fR(8) server replies with: + +.nf + \fBstatus=0\fR +.fi +.SH "MESSAGE RATE CONTROL" +.na +.nf +.ad +.fi +To register a message delivery request send the following +request to the \fBanvil\fR(8) server: + +.nf + \fBrequest=message\fR + \fBident=\fIstring\fR +.fi + +The \fBanvil\fR(8) server answers with the number of message +delivery requests per unit time for the (service, client) +combination specified with \fBident\fR: + +.nf + \fBstatus=0\fR + \fBrate=\fInumber\fR +.fi +.SH "RECIPIENT RATE CONTROL" +.na +.nf +.ad +.fi +To register a recipient request send the following request +to the \fBanvil\fR(8) server: + +.nf + \fBrequest=recipient\fR + \fBident=\fIstring\fR +.fi + +The \fBanvil\fR(8) server answers with the number of recipient +addresses per unit time for the (service, client) combination +specified with \fBident\fR: + +.nf + \fBstatus=0\fR + \fBrate=\fInumber\fR +.fi +.SH "TLS SESSION NEGOTIATION RATE CONTROL" +.na +.nf +.ad +.fi +The features described in this section are available with +Postfix 2.3 and later. + +To register a request for a new (i.e. not cached) TLS session +send the following request to the \fBanvil\fR(8) server: + +.nf + \fBrequest=newtls\fR + \fBident=\fIstring\fR +.fi + +The \fBanvil\fR(8) server answers with the number of new +TLS session requests per unit time for the (service, client) +combination specified with \fBident\fR: + +.nf + \fBstatus=0\fR + \fBrate=\fInumber\fR +.fi + +To retrieve new TLS session request rate information without +updating the counter information, send: + +.nf + \fBrequest=newtls_report\fR + \fBident=\fIstring\fR +.fi + +The \fBanvil\fR(8) server answers with the number of new +TLS session requests per unit time for the (service, client) +combination specified with \fBident\fR: + +.nf + \fBstatus=0\fR + \fBrate=\fInumber\fR +.fi +.SH "AUTH RATE CONTROL" +.na +.nf +.ad +.fi +To register an AUTH request send the following request +to the \fBanvil\fR(8) server: + +.nf + \fBrequest=auth\fR + \fBident=\fIstring\fR +.fi + +The \fBanvil\fR(8) server answers with the number of auth +requests per unit time for the (service, client) combination +specified with \fBident\fR: + +.nf + \fBstatus=0\fR + \fBrate=\fInumber\fR +.fi +.SH "SECURITY" +.na +.nf +.ad +.fi +The \fBanvil\fR(8) server does not talk to the network or to local +users, and can run chrooted at fixed low privilege. + +The \fBanvil\fR(8) server maintains an in\-memory table with +information about recent clients requests. No persistent +state is kept because standard system library routines are +not sufficiently robust for update\-intensive applications. + +Although the in\-memory state is kept only temporarily, this +may require a lot of memory on systems that handle connections +from many remote clients. To reduce memory usage, reduce +the time unit over which state is kept. +.SH DIAGNOSTICS +.ad +.fi +Problems and transactions are logged to \fBsyslogd\fR(8) +or \fBpostlogd\fR(8). + +Upon exit, and every \fBanvil_status_update_time\fR +seconds, the server logs the maximal count and rate values measured, +together with (service, client) information and the time of day +associated with those events. +In order to avoid unnecessary overhead, no measurements +are done for activity that isn't concurrency limited or +rate limited. +.SH BUGS +.ad +.fi +Systems behind network address translating routers or proxies +appear to have the same client address and can run into connection +count and/or rate limits falsely. + +In this preliminary implementation, a count (or rate) limited server +process can have only one remote client at a time. If a +server process reports +multiple simultaneous clients, state is kept only for the last +reported client. + +The \fBanvil\fR(8) server automatically discards client +request information after it expires. To prevent the +\fBanvil\fR(8) server from discarding client request rate +information too early or too late, a rate limited service +should always register connect/disconnect events even when +it does not explicitly limit them. +.SH "CONFIGURATION PARAMETERS" +.na +.nf +.ad +.fi +On low\-traffic mail systems, changes to \fBmain.cf\fR are +picked up automatically as \fBanvil\fR(8) processes run for +only a limited amount of time. On other mail systems, use +the command "\fBpostfix reload\fR" to speed up a change. + +The text below provides only a parameter summary. See +\fBpostconf\fR(5) for more details including examples. +.IP "\fBanvil_rate_time_unit (60s)\fR" +The time unit over which client connection rates and other rates +are calculated. +.IP "\fBanvil_status_update_time (600s)\fR" +How frequently the \fBanvil\fR(8) connection and rate limiting server +logs peak usage information. +.IP "\fBconfig_directory (see 'postconf -d' output)\fR" +The default location of the Postfix main.cf and master.cf +configuration files. +.IP "\fBdaemon_timeout (18000s)\fR" +How much time a Postfix daemon process may take to handle a +request before it is terminated by a built\-in watchdog timer. +.IP "\fBipc_timeout (3600s)\fR" +The time limit for sending or receiving information over an internal +communication channel. +.IP "\fBmax_idle (100s)\fR" +The maximum amount of time that an idle Postfix daemon process waits +for an incoming connection before terminating voluntarily. +.IP "\fBmax_use (100)\fR" +The maximal number of incoming connections that a Postfix daemon +process will service before terminating voluntarily. +.IP "\fBprocess_id (read\-only)\fR" +The process ID of a Postfix command or daemon process. +.IP "\fBprocess_name (read\-only)\fR" +The process name of a Postfix command or daemon process. +.IP "\fBsyslog_facility (mail)\fR" +The syslog facility of Postfix logging. +.IP "\fBsyslog_name (see 'postconf -d' output)\fR" +A prefix that is prepended to the process name in syslog +records, so that, for example, "smtpd" becomes "prefix/smtpd". +.PP +Available in Postfix 3.3 and later: +.IP "\fBservice_name (read\-only)\fR" +The master.cf service name of a Postfix daemon process. +.SH "SEE ALSO" +.na +.nf +smtpd(8), Postfix SMTP server +postconf(5), configuration parameters +master(5), generic daemon options +.SH "README FILES" +.na +.nf +.ad +.fi +Use "\fBpostconf readme_directory\fR" or +"\fBpostconf html_directory\fR" to locate this information. +.na +.nf +TUNING_README, performance tuning +.SH "LICENSE" +.na +.nf +.ad +.fi +The Secure Mailer license must be distributed with this software. +.SH HISTORY +.ad +.fi +.ad +.fi +The anvil service is available in Postfix 2.2 and later. +.SH "AUTHOR(S)" +.na +.nf +Wietse Venema +IBM T.J. Watson Research +P.O. Box 704 +Yorktown Heights, NY 10598, USA + +Wietse Venema +Google, Inc. +111 8th Avenue +New York, NY 10011, USA |