summaryrefslogtreecommitdiffstats
path: root/src/smtp/smtp.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--src/smtp/smtp.c1652
1 files changed, 1652 insertions, 0 deletions
diff --git a/src/smtp/smtp.c b/src/smtp/smtp.c
new file mode 100644
index 0000000..791ec89
--- /dev/null
+++ b/src/smtp/smtp.c
@@ -0,0 +1,1652 @@
+/*++
+/* NAME
+/* smtp 8
+/* SUMMARY
+/* Postfix SMTP+LMTP client
+/* SYNOPSIS
+/* \fBsmtp\fR [generic Postfix daemon options] [flags=DORX]
+/* DESCRIPTION
+/* The Postfix SMTP+LMTP client implements the SMTP and LMTP mail
+/* delivery protocols. It processes message delivery requests from
+/* the queue manager. Each request specifies a queue file, a sender
+/* address, a domain or host to deliver to, and recipient information.
+/* This program expects to be run from the \fBmaster\fR(8) process
+/* manager.
+/*
+/* The SMTP+LMTP client updates the queue file and marks recipients
+/* as finished, or it informs the queue manager that delivery should
+/* be tried again at a later time. Delivery status reports are sent
+/* to the \fBbounce\fR(8), \fBdefer\fR(8) or \fBtrace\fR(8) daemon as
+/* appropriate.
+/*
+/* The SMTP+LMTP client looks up a list of mail exchanger addresses for
+/* the destination host, sorts the list by preference, and connects
+/* to each listed address until it finds a server that responds.
+/*
+/* When a server is not reachable, or when mail delivery fails due
+/* to a recoverable error condition, the SMTP+LMTP client will try to
+/* deliver the mail to an alternate host.
+/*
+/* After a successful mail transaction, a connection may be saved
+/* to the \fBscache\fR(8) connection cache server, so that it
+/* may be used by any SMTP+LMTP client for a subsequent transaction.
+/*
+/* By default, connection caching is enabled temporarily for
+/* destinations that have a high volume of mail in the active
+/* queue. Connection caching can be enabled permanently for
+/* specific destinations.
+/* SMTP DESTINATION SYNTAX
+/* .ad
+/* .fi
+/* The Postfix SMTP+LMTP client supports multiple destinations
+/* separated by comma or whitespace (Postfix 3.5 and later).
+/* SMTP destinations have the following form:
+/* .IP \fIdomainname\fR
+/* .IP \fIdomainname\fR:\fIport\fR
+/* Look up the mail exchangers for the specified domain, and
+/* connect to the specified port (default: \fBsmtp\fR).
+/* .IP [\fIhostname\fR]
+/* .IP [\fIhostname\fR]:\fIport\fR
+/* Look up the address(es) of the specified host, and connect to
+/* the specified port (default: \fBsmtp\fR).
+/* .IP [\fIaddress\fR]
+/* .IP [\fIaddress\fR]:\fIport\fR
+/* Connect to the host at the specified address, and connect
+/* to the specified port (default: \fBsmtp\fR). An IPv6 address
+/* must be formatted as [\fBipv6\fR:\fIaddress\fR].
+/* LMTP DESTINATION SYNTAX
+/* .ad
+/* .fi
+/* The Postfix SMTP+LMTP client supports multiple destinations
+/* separated by comma or whitespace (Postfix 3.5 and later).
+/* LMTP destinations have the following form:
+/* .IP \fBunix\fR:\fIpathname\fR
+/* Connect to the local UNIX-domain server that is bound to the specified
+/* \fIpathname\fR. If the process runs chrooted, an absolute pathname
+/* is interpreted relative to the Postfix queue directory.
+/* .IP \fBinet\fR:\fIhostname\fR
+/* .IP \fBinet\fR:\fIhostname\fR:\fIport\fR
+/* .IP \fBinet\fR:[\fIaddress\fR]
+/* .IP \fBinet\fR:[\fIaddress\fR]:\fIport\fR
+/* Connect to the specified TCP port on the specified local or
+/* remote host. If no port is specified, connect to the port defined as
+/* \fBlmtp\fR in \fBservices\fR(4).
+/* If no such service is found, the \fBlmtp_tcp_port\fR configuration
+/* parameter (default value of 24) will be used.
+/* An IPv6 address must be formatted as [\fBipv6\fR:\fIaddress\fR].
+/* SINGLE-RECIPIENT DELIVERY
+/* .ad
+/* .fi
+/* By default, the Postfix SMTP+LMTP client delivers mail to
+/* multiple recipients per delivery request. This is undesirable
+/* when prepending a \fBDelivered-to:\fR or \fBX-Original-To:\fR
+/* message header. To prevent Postfix from sending multiple
+/* recipients per delivery request, specify
+/* .sp
+/* .nf
+/* \fItransport\fB_destination_recipient_limit = 1\fR
+/* .fi
+/*
+/* in the Postfix \fBmain.cf\fR file, where \fItransport\fR
+/* is the name in the first column of the Postfix \fBmaster.cf\fR
+/* entry for this mail delivery service.
+/* COMMAND ATTRIBUTE SYNTAX
+/* .ad
+/* .fi
+/* .IP "\fBflags=DORX\fR (optional)"
+/* Optional message processing flags.
+/* .RS
+/* .IP \fBD\fR
+/* Prepend a "\fBDelivered-To: \fIrecipient\fR" message header
+/* with the envelope recipient address. Note: for this to work,
+/* the \fItransport\fB_destination_recipient_limit\fR must be
+/* 1 (see SINGLE-RECIPIENT DELIVERY above for details).
+/* .sp
+/* The \fBD\fR flag also enforces loop detection: if a message
+/* already contains a \fBDelivered-To:\fR header with the same
+/* recipient address, then the message is returned as
+/* undeliverable. The address comparison is case insensitive.
+/* .sp
+/* This feature is available as of Postfix 3.5.
+/* .IP \fBO\fR
+/* Prepend an "\fBX-Original-To: \fIrecipient\fR" message
+/* header with the recipient address as given to Postfix. Note:
+/* for this to work, the
+/* \fItransport\fB_destination_recipient_limit\fR must be 1
+/* (see SINGLE-RECIPIENT DELIVERY above for details).
+/* .sp
+/* This feature is available as of Postfix 3.5.
+/* .IP \fBR\fR
+/* Prepend a "\fBReturn-Path: <\fIsender\fB>\fR" message header
+/* with the envelope sender address.
+/* .sp
+/* This feature is available as of Postfix 3.5.
+/* .IP \fBX\fR
+/* Indicates that the delivery is final. This flag affects
+/* the status reported in "success" DSN (delivery status
+/* notification) messages, and changes it from "relayed" into
+/* "delivered".
+/* .sp
+/* This feature is available as of Postfix 3.5.
+/* .RE
+/* SECURITY
+/* The SMTP+LMTP client is moderately security-sensitive. It
+/* talks to SMTP or LMTP servers and to DNS servers on the
+/* network. The SMTP+LMTP client can be run chrooted at fixed
+/* low privilege.
+/* STANDARDS
+/* RFC 821 (SMTP protocol)
+/* RFC 822 (ARPA Internet Text Messages)
+/* RFC 1651 (SMTP service extensions)
+/* RFC 1652 (8bit-MIME transport)
+/* RFC 1870 (Message Size Declaration)
+/* RFC 2033 (LMTP protocol)
+/* RFC 2034 (SMTP Enhanced Error Codes)
+/* RFC 2045 (MIME: Format of Internet Message Bodies)
+/* RFC 2046 (MIME: Media Types)
+/* RFC 2554 (AUTH command)
+/* RFC 2821 (SMTP protocol)
+/* RFC 2920 (SMTP Pipelining)
+/* RFC 3207 (STARTTLS command)
+/* RFC 3461 (SMTP DSN Extension)
+/* RFC 3463 (Enhanced Status Codes)
+/* RFC 4954 (AUTH command)
+/* RFC 5321 (SMTP protocol)
+/* RFC 6531 (Internationalized SMTP)
+/* RFC 6533 (Internationalized Delivery Status Notifications)
+/* RFC 7672 (SMTP security via opportunistic DANE TLS)
+/* DIAGNOSTICS
+/* Problems and transactions are logged to \fBsyslogd\fR(8)
+/* or \fBpostlogd\fR(8).
+/* Corrupted message files are marked so that the queue manager can
+/* move them to the \fBcorrupt\fR queue for further inspection.
+/*
+/* Depending on the setting of the \fBnotify_classes\fR parameter,
+/* the postmaster is notified of bounces, protocol problems, and of
+/* other trouble.
+/* BUGS
+/* SMTP and LMTP connection reuse for TLS (without closing the
+/* SMTP or LMTP connection) is not supported before Postfix 3.4.
+/*
+/* SMTP and LMTP connection reuse assumes that SASL credentials
+/* are valid for all destinations that map onto the same IP
+/* address and TCP port.
+/* CONFIGURATION PARAMETERS
+/* .ad
+/* .fi
+/* Before Postfix version 2.3, the LMTP client is a separate
+/* program that implements only a subset of the functionality
+/* available with SMTP: there is no support for TLS, and
+/* connections are cached in-process, making it ineffective
+/* when the client is used for multiple domains.
+/*
+/* Most smtp_\fIxxx\fR configuration parameters have an
+/* lmtp_\fIxxx\fR "mirror" parameter for the equivalent LMTP
+/* feature. This document describes only those LMTP-related
+/* parameters that aren't simply "mirror" parameters.
+/*
+/* Changes to \fBmain.cf\fR are picked up automatically, as \fBsmtp\fR(8)
+/* processes run for only a limited amount of time. Use the command
+/* "\fBpostfix reload\fR" to speed up a change.
+/*
+/* The text below provides only a parameter summary. See
+/* \fBpostconf\fR(5) for more details including examples.
+/* COMPATIBILITY CONTROLS
+/* .ad
+/* .fi
+/* .IP "\fBignore_mx_lookup_error (no)\fR"
+/* Ignore DNS MX lookups that produce no response.
+/* .IP "\fBsmtp_always_send_ehlo (yes)\fR"
+/* Always send EHLO at the start of an SMTP session.
+/* .IP "\fBsmtp_never_send_ehlo (no)\fR"
+/* Never send EHLO at the start of an SMTP session.
+/* .IP "\fBsmtp_defer_if_no_mx_address_found (no)\fR"
+/* Defer mail delivery when no MX record resolves to an IP address.
+/* .IP "\fBsmtp_line_length_limit (998)\fR"
+/* The maximal length of message header and body lines that Postfix
+/* will send via SMTP.
+/* .IP "\fBsmtp_pix_workaround_delay_time (10s)\fR"
+/* How long the Postfix SMTP client pauses before sending
+/* ".<CR><LF>" in order to work around the PIX firewall
+/* "<CR><LF>.<CR><LF>" bug.
+/* .IP "\fBsmtp_pix_workaround_threshold_time (500s)\fR"
+/* How long a message must be queued before the Postfix SMTP client
+/* turns on the PIX firewall "<CR><LF>.<CR><LF>"
+/* bug workaround for delivery through firewalls with "smtp fixup"
+/* mode turned on.
+/* .IP "\fBsmtp_pix_workarounds (disable_esmtp, delay_dotcrlf)\fR"
+/* A list that specifies zero or more workarounds for CISCO PIX
+/* firewall bugs.
+/* .IP "\fBsmtp_pix_workaround_maps (empty)\fR"
+/* Lookup tables, indexed by the remote SMTP server address, with
+/* per-destination workarounds for CISCO PIX firewall bugs.
+/* .IP "\fBsmtp_quote_rfc821_envelope (yes)\fR"
+/* Quote addresses in Postfix SMTP client MAIL FROM and RCPT TO commands
+/* as required
+/* by RFC 5321.
+/* .IP "\fBsmtp_reply_filter (empty)\fR"
+/* A mechanism to transform replies from remote SMTP servers one
+/* line at a time.
+/* .IP "\fBsmtp_skip_5xx_greeting (yes)\fR"
+/* Skip remote SMTP servers that greet with a 5XX status code.
+/* .IP "\fBsmtp_skip_quit_response (yes)\fR"
+/* Do not wait for the response to the SMTP QUIT command.
+/* .PP
+/* Available in Postfix version 2.0 and earlier:
+/* .IP "\fBsmtp_skip_4xx_greeting (yes)\fR"
+/* Skip SMTP servers that greet with a 4XX status code (go away, try
+/* again later).
+/* .PP
+/* Available in Postfix version 2.2 and later:
+/* .IP "\fBsmtp_discard_ehlo_keyword_address_maps (empty)\fR"
+/* Lookup tables, indexed by the remote SMTP server address, with
+/* case insensitive lists of EHLO keywords (pipelining, starttls, auth,
+/* etc.) that the Postfix SMTP client will ignore in the EHLO response from a
+/* remote SMTP server.
+/* .IP "\fBsmtp_discard_ehlo_keywords (empty)\fR"
+/* A case insensitive list of EHLO keywords (pipelining, starttls,
+/* auth, etc.) that the Postfix SMTP client will ignore in the EHLO
+/* response from a remote SMTP server.
+/* .IP "\fBsmtp_generic_maps (empty)\fR"
+/* Optional lookup tables that perform address rewriting in the
+/* Postfix SMTP client, typically to transform a locally valid address into
+/* a globally valid address when sending mail across the Internet.
+/* .PP
+/* Available in Postfix version 2.2.9 and later:
+/* .IP "\fBsmtp_cname_overrides_servername (version dependent)\fR"
+/* When the remote SMTP servername is a DNS CNAME, replace the
+/* servername with the result from CNAME expansion for the purpose of
+/* logging, SASL password lookup, TLS
+/* policy decisions, or TLS certificate verification.
+/* .PP
+/* Available in Postfix version 2.3 and later:
+/* .IP "\fBlmtp_discard_lhlo_keyword_address_maps (empty)\fR"
+/* Lookup tables, indexed by the remote LMTP server address, with
+/* case insensitive lists of LHLO keywords (pipelining, starttls,
+/* auth, etc.) that the Postfix LMTP client will ignore in the LHLO
+/* response
+/* from a remote LMTP server.
+/* .IP "\fBlmtp_discard_lhlo_keywords (empty)\fR"
+/* A case insensitive list of LHLO keywords (pipelining, starttls,
+/* auth, etc.) that the Postfix LMTP client will ignore in the LHLO
+/* response
+/* from a remote LMTP server.
+/* .PP
+/* Available in Postfix version 2.4.4 and later:
+/* .IP "\fBsend_cyrus_sasl_authzid (no)\fR"
+/* When authenticating to a remote SMTP or LMTP server with the
+/* default setting "no", send no SASL authoriZation ID (authzid); send
+/* only the SASL authentiCation ID (authcid) plus the authcid's password.
+/* .PP
+/* Available in Postfix version 2.5 and later:
+/* .IP "\fBsmtp_header_checks (empty)\fR"
+/* Restricted \fBheader_checks\fR(5) tables for the Postfix SMTP client.
+/* .IP "\fBsmtp_mime_header_checks (empty)\fR"
+/* Restricted \fBmime_header_checks\fR(5) tables for the Postfix SMTP
+/* client.
+/* .IP "\fBsmtp_nested_header_checks (empty)\fR"
+/* Restricted \fBnested_header_checks\fR(5) tables for the Postfix SMTP
+/* client.
+/* .IP "\fBsmtp_body_checks (empty)\fR"
+/* Restricted \fBbody_checks\fR(5) tables for the Postfix SMTP client.
+/* .PP
+/* Available in Postfix version 2.6 and later:
+/* .IP "\fBtcp_windowsize (0)\fR"
+/* An optional workaround for routers that break TCP window scaling.
+/* .PP
+/* Available in Postfix version 2.8 and later:
+/* .IP "\fBsmtp_dns_resolver_options (empty)\fR"
+/* DNS Resolver options for the Postfix SMTP client.
+/* .PP
+/* Available in Postfix version 2.9 - 3.6:
+/* .IP "\fBsmtp_per_record_deadline (no)\fR"
+/* Change the behavior of the smtp_*_timeout time limits, from a
+/* time limit per read or write system call, to a time limit to send
+/* or receive a complete record (an SMTP command line, SMTP response
+/* line, SMTP message content line, or TLS protocol message).
+/* .PP
+/* Available in Postfix version 2.9 and later:
+/* .IP "\fBsmtp_send_dummy_mail_auth (no)\fR"
+/* Whether or not to append the "AUTH=<>" option to the MAIL
+/* FROM command in SASL-authenticated SMTP sessions.
+/* .PP
+/* Available in Postfix version 2.11 and later:
+/* .IP "\fBsmtp_dns_support_level (empty)\fR"
+/* Level of DNS support in the Postfix SMTP client.
+/* .PP
+/* Available in Postfix version 3.0 and later:
+/* .IP "\fBsmtp_delivery_status_filter ($default_delivery_status_filter)\fR"
+/* Optional filter for the \fBsmtp\fR(8) delivery agent to change the
+/* delivery status code or explanatory text of successful or unsuccessful
+/* deliveries.
+/* .IP "\fBsmtp_dns_reply_filter (empty)\fR"
+/* Optional filter for Postfix SMTP client DNS lookup results.
+/* .PP
+/* Available in Postfix version 3.3 and later:
+/* .IP "\fBsmtp_balance_inet_protocols (yes)\fR"
+/* When a remote destination resolves to a combination of IPv4 and
+/* IPv6 addresses, ensure that the Postfix SMTP client can try both
+/* address types before it runs into the smtp_mx_address_limit.
+/* .PP
+/* Available in Postfix 3.5 and later:
+/* .IP "\fBinfo_log_address_format (external)\fR"
+/* The email address form that will be used in non-debug logging
+/* (info, warning, etc.).
+/* .PP
+/* Available in Postfix 3.6 and later:
+/* .IP "\fBdnssec_probe (ns:.)\fR"
+/* The DNS query type (default: "ns") and DNS query name (default:
+/* ".") that Postfix may use to determine whether DNSSEC validation
+/* is available.
+/* .IP "\fBknown_tcp_ports (lmtp=24, smtp=25, smtps=submissions=465, submission=587)\fR"
+/* Optional setting that avoids lookups in the \fBservices\fR(5) database.
+/* .PP
+/* Available in Postfix version 3.7 and later:
+/* .IP "\fBsmtp_per_request_deadline (no)\fR"
+/* Change the behavior of the smtp_*_timeout time limits, from a
+/* time limit per plaintext or TLS read or write call, to a combined
+/* time limit for sending a complete SMTP request and for receiving a
+/* complete SMTP response.
+/* .IP "\fBsmtp_min_data_rate (500)\fR"
+/* The minimum plaintext data transfer rate in bytes/second for
+/* DATA requests, when deadlines are enabled with smtp_per_request_deadline.
+/* .IP "\fBheader_from_format (standard)\fR"
+/* The format of the Postfix-generated \fBFrom:\fR header.
+/* MIME PROCESSING CONTROLS
+/* .ad
+/* .fi
+/* Available in Postfix version 2.0 and later:
+/* .IP "\fBdisable_mime_output_conversion (no)\fR"
+/* Disable the conversion of 8BITMIME format to 7BIT format.
+/* .IP "\fBmime_boundary_length_limit (2048)\fR"
+/* The maximal length of MIME multipart boundary strings.
+/* .IP "\fBmime_nesting_limit (100)\fR"
+/* The maximal recursion level that the MIME processor will handle.
+/* EXTERNAL CONTENT INSPECTION CONTROLS
+/* .ad
+/* .fi
+/* Available in Postfix version 2.1 and later:
+/* .IP "\fBsmtp_send_xforward_command (no)\fR"
+/* Send the non-standard XFORWARD command when the Postfix SMTP server
+/* EHLO response announces XFORWARD support.
+/* SASL AUTHENTICATION CONTROLS
+/* .ad
+/* .fi
+/* .IP "\fBsmtp_sasl_auth_enable (no)\fR"
+/* Enable SASL authentication in the Postfix SMTP client.
+/* .IP "\fBsmtp_sasl_password_maps (empty)\fR"
+/* Optional Postfix SMTP client lookup tables with one username:password
+/* entry per sender, remote hostname or next-hop domain.
+/* .IP "\fBsmtp_sasl_security_options (noplaintext, noanonymous)\fR"
+/* Postfix SMTP client SASL security options; as of Postfix 2.3
+/* the list of available
+/* features depends on the SASL client implementation that is selected
+/* with \fBsmtp_sasl_type\fR.
+/* .PP
+/* Available in Postfix version 2.2 and later:
+/* .IP "\fBsmtp_sasl_mechanism_filter (empty)\fR"
+/* If non-empty, a Postfix SMTP client filter for the remote SMTP
+/* server's list of offered SASL mechanisms.
+/* .PP
+/* Available in Postfix version 2.3 and later:
+/* .IP "\fBsmtp_sender_dependent_authentication (no)\fR"
+/* Enable sender-dependent authentication in the Postfix SMTP client; this is
+/* available only with SASL authentication, and disables SMTP connection
+/* caching to ensure that mail from different senders will use the
+/* appropriate credentials.
+/* .IP "\fBsmtp_sasl_path (empty)\fR"
+/* Implementation-specific information that the Postfix SMTP client
+/* passes through to
+/* the SASL plug-in implementation that is selected with
+/* \fBsmtp_sasl_type\fR.
+/* .IP "\fBsmtp_sasl_type (cyrus)\fR"
+/* The SASL plug-in type that the Postfix SMTP client should use
+/* for authentication.
+/* .PP
+/* Available in Postfix version 2.5 and later:
+/* .IP "\fBsmtp_sasl_auth_cache_name (empty)\fR"
+/* An optional table to prevent repeated SASL authentication
+/* failures with the same remote SMTP server hostname, username and
+/* password.
+/* .IP "\fBsmtp_sasl_auth_cache_time (90d)\fR"
+/* The maximal age of an smtp_sasl_auth_cache_name entry before it
+/* is removed.
+/* .IP "\fBsmtp_sasl_auth_soft_bounce (yes)\fR"
+/* When a remote SMTP server rejects a SASL authentication request
+/* with a 535 reply code, defer mail delivery instead of returning
+/* mail as undeliverable.
+/* .PP
+/* Available in Postfix version 2.9 and later:
+/* .IP "\fBsmtp_send_dummy_mail_auth (no)\fR"
+/* Whether or not to append the "AUTH=<>" option to the MAIL
+/* FROM command in SASL-authenticated SMTP sessions.
+/* STARTTLS SUPPORT CONTROLS
+/* .ad
+/* .fi
+/* Detailed information about STARTTLS configuration may be found
+/* in the TLS_README document.
+/* .IP "\fBsmtp_tls_security_level (empty)\fR"
+/* The default SMTP TLS security level for the Postfix SMTP client;
+/* when a non-empty value is specified, this overrides the obsolete
+/* parameters smtp_use_tls, smtp_enforce_tls, and smtp_tls_enforce_peername.
+/* .IP "\fBsmtp_sasl_tls_security_options ($smtp_sasl_security_options)\fR"
+/* The SASL authentication security options that the Postfix SMTP
+/* client uses for TLS encrypted SMTP sessions.
+/* .IP "\fBsmtp_starttls_timeout (300s)\fR"
+/* Time limit for Postfix SMTP client write and read operations
+/* during TLS startup and shutdown handshake procedures.
+/* .IP "\fBsmtp_tls_CAfile (empty)\fR"
+/* A file containing CA certificates of root CAs trusted to sign
+/* either remote SMTP server certificates or intermediate CA certificates.
+/* .IP "\fBsmtp_tls_CApath (empty)\fR"
+/* Directory with PEM format Certification Authority certificates
+/* that the Postfix SMTP client uses to verify a remote SMTP server
+/* certificate.
+/* .IP "\fBsmtp_tls_cert_file (empty)\fR"
+/* File with the Postfix SMTP client RSA certificate in PEM format.
+/* .IP "\fBsmtp_tls_mandatory_ciphers (medium)\fR"
+/* The minimum TLS cipher grade that the Postfix SMTP client will
+/* use with
+/* mandatory TLS encryption.
+/* .IP "\fBsmtp_tls_exclude_ciphers (empty)\fR"
+/* List of ciphers or cipher types to exclude from the Postfix
+/* SMTP client cipher
+/* list at all TLS security levels.
+/* .IP "\fBsmtp_tls_mandatory_exclude_ciphers (empty)\fR"
+/* Additional list of ciphers or cipher types to exclude from the
+/* Postfix SMTP client cipher list at mandatory TLS security levels.
+/* .IP "\fBsmtp_tls_dcert_file (empty)\fR"
+/* File with the Postfix SMTP client DSA certificate in PEM format.
+/* .IP "\fBsmtp_tls_dkey_file ($smtp_tls_dcert_file)\fR"
+/* File with the Postfix SMTP client DSA private key in PEM format.
+/* .IP "\fBsmtp_tls_key_file ($smtp_tls_cert_file)\fR"
+/* File with the Postfix SMTP client RSA private key in PEM format.
+/* .IP "\fBsmtp_tls_loglevel (0)\fR"
+/* Enable additional Postfix SMTP client logging of TLS activity.
+/* .IP "\fBsmtp_tls_note_starttls_offer (no)\fR"
+/* Log the hostname of a remote SMTP server that offers STARTTLS,
+/* when TLS is not already enabled for that server.
+/* .IP "\fBsmtp_tls_policy_maps (empty)\fR"
+/* Optional lookup tables with the Postfix SMTP client TLS security
+/* policy by next-hop destination; when a non-empty value is specified,
+/* this overrides the obsolete smtp_tls_per_site parameter.
+/* .IP "\fBsmtp_tls_mandatory_protocols (see 'postconf -d' output)\fR"
+/* TLS protocols that the Postfix SMTP client will use with mandatory
+/* TLS encryption.
+/* .IP "\fBsmtp_tls_scert_verifydepth (9)\fR"
+/* The verification depth for remote SMTP server certificates.
+/* .IP "\fBsmtp_tls_secure_cert_match (nexthop, dot-nexthop)\fR"
+/* How the Postfix SMTP client verifies the server certificate
+/* peername for the "secure" TLS security level.
+/* .IP "\fBsmtp_tls_session_cache_database (empty)\fR"
+/* Name of the file containing the optional Postfix SMTP client
+/* TLS session cache.
+/* .IP "\fBsmtp_tls_session_cache_timeout (3600s)\fR"
+/* The expiration time of Postfix SMTP client TLS session cache
+/* information.
+/* .IP "\fBsmtp_tls_verify_cert_match (hostname)\fR"
+/* How the Postfix SMTP client verifies the server certificate
+/* peername for the
+/* "verify" TLS security level.
+/* .IP "\fBtls_daemon_random_bytes (32)\fR"
+/* The number of pseudo-random bytes that an \fBsmtp\fR(8) or \fBsmtpd\fR(8)
+/* process requests from the \fBtlsmgr\fR(8) server in order to seed its
+/* internal pseudo random number generator (PRNG).
+/* .IP "\fBtls_high_cipherlist (see 'postconf -d' output)\fR"
+/* The OpenSSL cipherlist for "high" grade ciphers.
+/* .IP "\fBtls_medium_cipherlist (see 'postconf -d' output)\fR"
+/* The OpenSSL cipherlist for "medium" or higher grade ciphers.
+/* .IP "\fBtls_low_cipherlist (see 'postconf -d' output)\fR"
+/* The OpenSSL cipherlist for "low" or higher grade ciphers.
+/* .IP "\fBtls_export_cipherlist (see 'postconf -d' output)\fR"
+/* The OpenSSL cipherlist for "export" or higher grade ciphers.
+/* .IP "\fBtls_null_cipherlist (eNULL:!aNULL)\fR"
+/* The OpenSSL cipherlist for "NULL" grade ciphers that provide
+/* authentication without encryption.
+/* .PP
+/* Available in Postfix version 2.4 and later:
+/* .IP "\fBsmtp_sasl_tls_verified_security_options ($smtp_sasl_tls_security_options)\fR"
+/* The SASL authentication security options that the Postfix SMTP
+/* client uses for TLS encrypted SMTP sessions with a verified server
+/* certificate.
+/* .PP
+/* Available in Postfix version 2.5 and later:
+/* .IP "\fBsmtp_tls_fingerprint_cert_match (empty)\fR"
+/* List of acceptable remote SMTP server certificate fingerprints for
+/* the "fingerprint" TLS security level (\fBsmtp_tls_security_level\fR =
+/* fingerprint).
+/* .IP "\fBsmtp_tls_fingerprint_digest (see 'postconf -d' output)\fR"
+/* The message digest algorithm used to construct remote SMTP server
+/* certificate fingerprints.
+/* .PP
+/* Available in Postfix version 2.6 and later:
+/* .IP "\fBsmtp_tls_protocols (see postconf -d output)\fR"
+/* TLS protocols that the Postfix SMTP client will use with
+/* opportunistic TLS encryption.
+/* .IP "\fBsmtp_tls_ciphers (medium)\fR"
+/* The minimum TLS cipher grade that the Postfix SMTP client
+/* will use with opportunistic TLS encryption.
+/* .IP "\fBsmtp_tls_eccert_file (empty)\fR"
+/* File with the Postfix SMTP client ECDSA certificate in PEM format.
+/* .IP "\fBsmtp_tls_eckey_file ($smtp_tls_eccert_file)\fR"
+/* File with the Postfix SMTP client ECDSA private key in PEM format.
+/* .PP
+/* Available in Postfix version 2.7 and later:
+/* .IP "\fBsmtp_tls_block_early_mail_reply (no)\fR"
+/* Try to detect a mail hijacking attack based on a TLS protocol
+/* vulnerability (CVE-2009-3555), where an attacker prepends malicious
+/* HELO, MAIL, RCPT, DATA commands to a Postfix SMTP client TLS session.
+/* .PP
+/* Available in Postfix version 2.8 and later:
+/* .IP "\fBtls_disable_workarounds (see 'postconf -d' output)\fR"
+/* List or bit-mask of OpenSSL bug work-arounds to disable.
+/* .PP
+/* Available in Postfix version 2.11-3.1:
+/* .IP "\fBtls_dane_digest_agility (on)\fR"
+/* Configure RFC7671 DANE TLSA digest algorithm agility.
+/* .IP "\fBtls_dane_trust_anchor_digest_enable (yes)\fR"
+/* Enable support for RFC 6698 (DANE TLSA) DNS records that contain
+/* digests of trust-anchors with certificate usage "2".
+/* .PP
+/* Available in Postfix version 2.11 and later:
+/* .IP "\fBsmtp_tls_trust_anchor_file (empty)\fR"
+/* Zero or more PEM-format files with trust-anchor certificates
+/* and/or public keys.
+/* .IP "\fBsmtp_tls_force_insecure_host_tlsa_lookup (no)\fR"
+/* Lookup the associated DANE TLSA RRset even when a hostname is
+/* not an alias and its address records lie in an unsigned zone.
+/* .IP "\fBtlsmgr_service_name (tlsmgr)\fR"
+/* The name of the \fBtlsmgr\fR(8) service entry in master.cf.
+/* .PP
+/* Available in Postfix version 3.0 and later:
+/* .IP "\fBsmtp_tls_wrappermode (no)\fR"
+/* Request that the Postfix SMTP client connects using the
+/* legacy SMTPS protocol instead of using the STARTTLS command.
+/* .PP
+/* Available in Postfix version 3.1 and later:
+/* .IP "\fBsmtp_tls_dane_insecure_mx_policy (see 'postconf -d' output)\fR"
+/* The TLS policy for MX hosts with "secure" TLSA records when the
+/* nexthop destination security level is \fBdane\fR, but the MX
+/* record was found via an "insecure" MX lookup.
+/* .PP
+/* Available in Postfix version 3.4 and later:
+/* .IP "\fBsmtp_tls_connection_reuse (no)\fR"
+/* Try to make multiple deliveries per TLS-encrypted connection.
+/* .IP "\fBsmtp_tls_chain_files (empty)\fR"
+/* List of one or more PEM files, each holding one or more private keys
+/* directly followed by a corresponding certificate chain.
+/* .IP "\fBsmtp_tls_servername (empty)\fR"
+/* Optional name to send to the remote SMTP server in the TLS Server
+/* Name Indication (SNI) extension.
+/* .PP
+/* Available in Postfix 3.5, 3.4.6, 3.3.5, 3.2.10, 3.1.13 and later:
+/* .IP "\fBtls_fast_shutdown_enable (yes)\fR"
+/* A workaround for implementations that hang Postfix while shutting
+/* down a TLS session, until Postfix times out.
+/* .PP
+/* Available in Postfix 3.9, 3.8.1, 3.7.6, 3.6.10, 3.5.20 and later:
+/* .IP "\fBtls_config_file (default)\fR"
+/* Optional configuration file with baseline OpenSSL settings.
+/* .IP "\fBtls_config_name (empty)\fR"
+/* The application name passed by Postfix to OpenSSL library
+/* initialization functions.
+/* OBSOLETE STARTTLS CONTROLS
+/* .ad
+/* .fi
+/* The following configuration parameters exist for compatibility
+/* with Postfix versions before 2.3. Support for these will
+/* be removed in a future release.
+/* .IP "\fBsmtp_use_tls (no)\fR"
+/* Opportunistic mode: use TLS when a remote SMTP server announces
+/* STARTTLS support, otherwise send the mail in the clear.
+/* .IP "\fBsmtp_enforce_tls (no)\fR"
+/* Enforcement mode: require that remote SMTP servers use TLS
+/* encryption, and never send mail in the clear.
+/* .IP "\fBsmtp_tls_enforce_peername (yes)\fR"
+/* With mandatory TLS encryption, require that the remote SMTP
+/* server hostname matches the information in the remote SMTP server
+/* certificate.
+/* .IP "\fBsmtp_tls_per_site (empty)\fR"
+/* Optional lookup tables with the Postfix SMTP client TLS usage
+/* policy by next-hop destination and by remote SMTP server hostname.
+/* .IP "\fBsmtp_tls_cipherlist (empty)\fR"
+/* Obsolete Postfix < 2.3 control for the Postfix SMTP client TLS
+/* cipher list.
+/* RESOURCE AND RATE CONTROLS
+/* .ad
+/* .fi
+/* .IP "\fBsmtp_connect_timeout (30s)\fR"
+/* The Postfix SMTP client time limit for completing a TCP connection, or
+/* zero (use the operating system built-in time limit).
+/* .IP "\fBsmtp_helo_timeout (300s)\fR"
+/* The Postfix SMTP client time limit for sending the HELO or EHLO command,
+/* and for receiving the initial remote SMTP server response.
+/* .IP "\fBlmtp_lhlo_timeout (300s)\fR"
+/* The Postfix LMTP client time limit for sending the LHLO command,
+/* and for receiving the initial remote LMTP server response.
+/* .IP "\fBsmtp_xforward_timeout (300s)\fR"
+/* The Postfix SMTP client time limit for sending the XFORWARD command,
+/* and for receiving the remote SMTP server response.
+/* .IP "\fBsmtp_mail_timeout (300s)\fR"
+/* The Postfix SMTP client time limit for sending the MAIL FROM command,
+/* and for receiving the remote SMTP server response.
+/* .IP "\fBsmtp_rcpt_timeout (300s)\fR"
+/* The Postfix SMTP client time limit for sending the SMTP RCPT TO
+/* command, and for receiving the remote SMTP server response.
+/* .IP "\fBsmtp_data_init_timeout (120s)\fR"
+/* The Postfix SMTP client time limit for sending the SMTP DATA command,
+/* and for receiving the remote SMTP server response.
+/* .IP "\fBsmtp_data_xfer_timeout (180s)\fR"
+/* The Postfix SMTP client time limit for sending the SMTP message content.
+/* .IP "\fBsmtp_data_done_timeout (600s)\fR"
+/* The Postfix SMTP client time limit for sending the SMTP ".", and
+/* for receiving the remote SMTP server response.
+/* .IP "\fBsmtp_quit_timeout (300s)\fR"
+/* The Postfix SMTP client time limit for sending the QUIT command,
+/* and for receiving the remote SMTP server response.
+/* .PP
+/* Available in Postfix version 2.1 and later:
+/* .IP "\fBsmtp_mx_address_limit (5)\fR"
+/* The maximal number of MX (mail exchanger) IP addresses that can
+/* result from Postfix SMTP client mail exchanger lookups, or zero (no
+/* limit).
+/* .IP "\fBsmtp_mx_session_limit (2)\fR"
+/* The maximal number of SMTP sessions per delivery request before
+/* the Postfix SMTP client
+/* gives up or delivers to a fall-back relay host, or zero (no
+/* limit).
+/* .IP "\fBsmtp_rset_timeout (20s)\fR"
+/* The Postfix SMTP client time limit for sending the RSET command,
+/* and for receiving the remote SMTP server response.
+/* .PP
+/* Available in Postfix version 2.2 and earlier:
+/* .IP "\fBlmtp_cache_connection (yes)\fR"
+/* Keep Postfix LMTP client connections open for up to $max_idle
+/* seconds.
+/* .PP
+/* Available in Postfix version 2.2 and later:
+/* .IP "\fBsmtp_connection_cache_destinations (empty)\fR"
+/* Permanently enable SMTP connection caching for the specified
+/* destinations.
+/* .IP "\fBsmtp_connection_cache_on_demand (yes)\fR"
+/* Temporarily enable SMTP connection caching while a destination
+/* has a high volume of mail in the active queue.
+/* .IP "\fBsmtp_connection_reuse_time_limit (300s)\fR"
+/* The amount of time during which Postfix will use an SMTP
+/* connection repeatedly.
+/* .IP "\fBsmtp_connection_cache_time_limit (2s)\fR"
+/* When SMTP connection caching is enabled, the amount of time that
+/* an unused SMTP client socket is kept open before it is closed.
+/* .PP
+/* Available in Postfix version 2.3 and later:
+/* .IP "\fBconnection_cache_protocol_timeout (5s)\fR"
+/* Time limit for connection cache connect, send or receive
+/* operations.
+/* .PP
+/* Available in Postfix version 2.9 - 3.6:
+/* .IP "\fBsmtp_per_record_deadline (no)\fR"
+/* Change the behavior of the smtp_*_timeout time limits, from a
+/* time limit per read or write system call, to a time limit to send
+/* or receive a complete record (an SMTP command line, SMTP response
+/* line, SMTP message content line, or TLS protocol message).
+/* .PP
+/* Available in Postfix version 2.11 and later:
+/* .IP "\fBsmtp_connection_reuse_count_limit (0)\fR"
+/* When SMTP connection caching is enabled, the number of times
+/* that an SMTP session may be reused before it is closed, or zero (no
+/* limit).
+/* .PP
+/* Available in Postfix version 3.4 and later:
+/* .IP "\fBsmtp_tls_connection_reuse (no)\fR"
+/* Try to make multiple deliveries per TLS-encrypted connection.
+/* .PP
+/* Available in Postfix version 3.7 and later:
+/* .IP "\fBsmtp_per_request_deadline (no)\fR"
+/* Change the behavior of the smtp_*_timeout time limits, from a
+/* time limit per plaintext or TLS read or write call, to a combined
+/* time limit for sending a complete SMTP request and for receiving a
+/* complete SMTP response.
+/* .IP "\fBsmtp_min_data_rate (500)\fR"
+/* The minimum plaintext data transfer rate in bytes/second for
+/* DATA requests, when deadlines are enabled with smtp_per_request_deadline.
+/* .PP
+/* Implemented in the qmgr(8) daemon:
+/* .IP "\fBtransport_destination_concurrency_limit ($default_destination_concurrency_limit)\fR"
+/* A transport-specific override for the
+/* default_destination_concurrency_limit parameter value, where
+/* \fItransport\fR is the master.cf name of the message delivery
+/* transport.
+/* .IP "\fBtransport_destination_recipient_limit ($default_destination_recipient_limit)\fR"
+/* A transport-specific override for the
+/* default_destination_recipient_limit parameter value, where
+/* \fItransport\fR is the master.cf name of the message delivery
+/* transport.
+/* SMTPUTF8 CONTROLS
+/* .ad
+/* .fi
+/* Preliminary SMTPUTF8 support is introduced with Postfix 3.0.
+/* .IP "\fBsmtputf8_enable (yes)\fR"
+/* Enable preliminary SMTPUTF8 support for the protocols described
+/* in RFC 6531..6533.
+/* .IP "\fBsmtputf8_autodetect_classes (sendmail, verify)\fR"
+/* Detect that a message requires SMTPUTF8 support for the specified
+/* mail origin classes.
+/* .PP
+/* Available in Postfix version 3.2 and later:
+/* .IP "\fBenable_idna2003_compatibility (no)\fR"
+/* Enable 'transitional' compatibility between IDNA2003 and IDNA2008,
+/* when converting UTF-8 domain names to/from the ASCII form that is
+/* used for DNS lookups.
+/* TROUBLE SHOOTING CONTROLS
+/* .ad
+/* .fi
+/* .IP "\fBdebug_peer_level (2)\fR"
+/* The increment in verbose logging level when a nexthop destination,
+/* remote client or server name or network address matches a pattern
+/* given with the debug_peer_list parameter.
+/* .IP "\fBdebug_peer_list (empty)\fR"
+/* Optional list of nexthop destination, remote client or server
+/* name or network address patterns that, if matched, cause the verbose
+/* logging level to increase by the amount specified in $debug_peer_level.
+/* .IP "\fBerror_notice_recipient (postmaster)\fR"
+/* The recipient of postmaster notifications about mail delivery
+/* problems that are caused by policy, resource, software or protocol
+/* errors.
+/* .IP "\fBinternal_mail_filter_classes (empty)\fR"
+/* What categories of Postfix-generated mail are subject to
+/* before-queue content inspection by non_smtpd_milters, header_checks
+/* and body_checks.
+/* .IP "\fBnotify_classes (resource, software)\fR"
+/* The list of error classes that are reported to the postmaster.
+/* MISCELLANEOUS CONTROLS
+/* .ad
+/* .fi
+/* .IP "\fBbest_mx_transport (empty)\fR"
+/* Where the Postfix SMTP client should deliver mail when it detects
+/* a "mail loops back to myself" error condition.
+/* .IP "\fBconfig_directory (see 'postconf -d' output)\fR"
+/* The default location of the Postfix main.cf and master.cf
+/* configuration files.
+/* .IP "\fBdaemon_timeout (18000s)\fR"
+/* How much time a Postfix daemon process may take to handle a
+/* request before it is terminated by a built-in watchdog timer.
+/* .IP "\fBdelay_logging_resolution_limit (2)\fR"
+/* The maximal number of digits after the decimal point when logging
+/* sub-second delay values.
+/* .IP "\fBdisable_dns_lookups (no)\fR"
+/* Disable DNS lookups in the Postfix SMTP and LMTP clients.
+/* .IP "\fBinet_interfaces (all)\fR"
+/* The network interface addresses that this mail system receives
+/* mail on.
+/* .IP "\fBinet_protocols (see 'postconf -d output')\fR"
+/* The Internet protocols Postfix will attempt to use when making
+/* or accepting connections.
+/* .IP "\fBipc_timeout (3600s)\fR"
+/* The time limit for sending or receiving information over an internal
+/* communication channel.
+/* .IP "\fBlmtp_assume_final (no)\fR"
+/* When a remote LMTP server announces no DSN support, assume that
+/* the
+/* server performs final delivery, and send "delivered" delivery status
+/* notifications instead of "relayed".
+/* .IP "\fBlmtp_tcp_port (24)\fR"
+/* The default TCP port that the Postfix LMTP client connects to.
+/* .IP "\fBmax_idle (100s)\fR"
+/* The maximum amount of time that an idle Postfix daemon process waits
+/* for an incoming connection before terminating voluntarily.
+/* .IP "\fBmax_use (100)\fR"
+/* The maximal number of incoming connections that a Postfix daemon
+/* process will service before terminating voluntarily.
+/* .IP "\fBprocess_id (read-only)\fR"
+/* The process ID of a Postfix command or daemon process.
+/* .IP "\fBprocess_name (read-only)\fR"
+/* The process name of a Postfix command or daemon process.
+/* .IP "\fBproxy_interfaces (empty)\fR"
+/* The network interface addresses that this mail system receives mail
+/* on by way of a proxy or network address translation unit.
+/* .IP "\fBsmtp_address_preference (any)\fR"
+/* The address type ("ipv6", "ipv4" or "any") that the Postfix
+/* SMTP client will try first, when a destination has IPv6 and IPv4
+/* addresses with equal MX preference.
+/* .IP "\fBsmtp_bind_address (empty)\fR"
+/* An optional numerical network address that the Postfix SMTP client
+/* should bind to when making an IPv4 connection.
+/* .IP "\fBsmtp_bind_address6 (empty)\fR"
+/* An optional numerical network address that the Postfix SMTP client
+/* should bind to when making an IPv6 connection.
+/* .IP "\fBsmtp_helo_name ($myhostname)\fR"
+/* The hostname to send in the SMTP HELO or EHLO command.
+/* .IP "\fBlmtp_lhlo_name ($myhostname)\fR"
+/* The hostname to send in the LMTP LHLO command.
+/* .IP "\fBsmtp_host_lookup (dns)\fR"
+/* What mechanisms the Postfix SMTP client uses to look up a host's
+/* IP address.
+/* .IP "\fBsmtp_randomize_addresses (yes)\fR"
+/* Randomize the order of equal-preference MX host addresses.
+/* .IP "\fBsyslog_facility (mail)\fR"
+/* The syslog facility of Postfix logging.
+/* .IP "\fBsyslog_name (see 'postconf -d' output)\fR"
+/* A prefix that is prepended to the process name in syslog
+/* records, so that, for example, "smtpd" becomes "prefix/smtpd".
+/* .PP
+/* Available with Postfix 2.2 and earlier:
+/* .IP "\fBfallback_relay (empty)\fR"
+/* Optional list of relay hosts for SMTP destinations that can't be
+/* found or that are unreachable.
+/* .PP
+/* Available with Postfix 2.3 and later:
+/* .IP "\fBsmtp_fallback_relay ($fallback_relay)\fR"
+/* Optional list of relay hosts for SMTP destinations that can't be
+/* found or that are unreachable.
+/* .PP
+/* Available with Postfix 3.0 and later:
+/* .IP "\fBsmtp_address_verify_target (rcpt)\fR"
+/* In the context of email address verification, the SMTP protocol
+/* stage that determines whether an email address is deliverable.
+/* .PP
+/* Available with Postfix 3.1 and later:
+/* .IP "\fBlmtp_fallback_relay (empty)\fR"
+/* Optional list of relay hosts for LMTP destinations that can't be
+/* found or that are unreachable.
+/* .PP
+/* Available with Postfix 3.2 and later:
+/* .IP "\fBsmtp_tcp_port (smtp)\fR"
+/* The default TCP port that the Postfix SMTP client connects to.
+/* .PP
+/* Available in Postfix 3.3 and later:
+/* .IP "\fBservice_name (read-only)\fR"
+/* The master.cf service name of a Postfix daemon process.
+/* .PP
+/* Available in Postfix 3.7 and later:
+/* .IP "\fBsmtp_bind_address_enforce (no)\fR"
+/* Defer delivery when the Postfix SMTP client cannot apply the
+/* smtp_bind_address or smtp_bind_address6 setting.
+/* SEE ALSO
+/* generic(5), output address rewriting
+/* header_checks(5), message header content inspection
+/* body_checks(5), body parts content inspection
+/* qmgr(8), queue manager
+/* bounce(8), delivery status reports
+/* scache(8), connection cache server
+/* postconf(5), configuration parameters
+/* master(5), generic daemon options
+/* master(8), process manager
+/* tlsmgr(8), TLS session and PRNG management
+/* postlogd(8), Postfix logging
+/* syslogd(8), system logging
+/* README FILES
+/* .ad
+/* .fi
+/* Use "\fBpostconf readme_directory\fR" or
+/* "\fBpostconf html_directory\fR" to locate this information.
+/* .na
+/* .nf
+/* SASL_README, Postfix SASL howto
+/* TLS_README, Postfix STARTTLS howto
+/* LICENSE
+/* .ad
+/* .fi
+/* The Secure Mailer license must be distributed with this software.
+/* AUTHOR(S)
+/* Wietse Venema
+/* IBM T.J. Watson Research
+/* P.O. Box 704
+/* Yorktown Heights, NY 10598, USA
+/*
+/* Wietse Venema
+/* Google, Inc.
+/* 111 8th Avenue
+/* New York, NY 10011, USA
+/*
+/* Command pipelining in cooperation with:
+/* Jon Ribbens
+/* Oaktree Internet Solutions Ltd.,
+/* Internet House,
+/* Canal Basin,
+/* Coventry,
+/* CV1 4LY, United Kingdom.
+/*
+/* SASL support originally by:
+/* Till Franke
+/* SuSE Rhein/Main AG
+/* 65760 Eschborn, Germany
+/*
+/* TLS support originally by:
+/* Lutz Jaenicke
+/* BTU Cottbus
+/* Allgemeine Elektrotechnik
+/* Universitaetsplatz 3-4
+/* D-03044 Cottbus, Germany
+/*
+/* Revised TLS and SMTP connection cache support by:
+/* Victor Duchovni
+/* Morgan Stanley
+/*--*/
+
+/* System library. */
+
+#include <sys_defs.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+#include <fcntl.h>
+#include <dict.h>
+#include <stringops.h>
+
+/* Utility library. */
+
+#include <msg.h>
+#include <mymalloc.h>
+#include <name_mask.h>
+#include <name_code.h>
+#include <byte_mask.h>
+
+/* Global library. */
+
+#include <deliver_request.h>
+#include <delivered_hdr.h>
+#include <mail_proto.h>
+#include <mail_params.h>
+#include <mail_version.h>
+#include <mail_conf.h>
+#include <debug_peer.h>
+#include <flush_clnt.h>
+#include <scache.h>
+#include <string_list.h>
+#include <maps.h>
+#include <ext_prop.h>
+#include <hfrom_format.h>
+
+/* DNS library. */
+
+#include <dns.h>
+
+/* Single server skeleton. */
+
+#include <mail_server.h>
+
+/* Application-specific. */
+
+#include "smtp.h"
+#include "smtp_sasl.h"
+
+ /*
+ * Tunable parameters. These have compiled-in defaults that can be overruled
+ * by settings in the global Postfix configuration file.
+ */
+int var_smtp_conn_tmout;
+int var_smtp_helo_tmout;
+int var_smtp_xfwd_tmout;
+int var_smtp_mail_tmout;
+int var_smtp_rcpt_tmout;
+int var_smtp_data0_tmout;
+int var_smtp_data1_tmout;
+int var_smtp_data2_tmout;
+int var_smtp_rset_tmout;
+int var_smtp_quit_tmout;
+char *var_notify_classes;
+int var_smtp_skip_5xx_greeting;
+int var_ign_mx_lookup_err;
+int var_skip_quit_resp;
+char *var_fallback_relay;
+char *var_bestmx_transp;
+char *var_error_rcpt;
+int var_smtp_always_ehlo;
+int var_smtp_never_ehlo;
+char *var_smtp_sasl_opts;
+char *var_smtp_sasl_path;
+char *var_smtp_sasl_passwd;
+bool var_smtp_sasl_enable;
+char *var_smtp_sasl_mechs;
+char *var_smtp_sasl_type;
+char *var_smtp_bind_addr;
+char *var_smtp_bind_addr6;
+char *var_smtp_vrfy_tgt;
+bool var_smtp_rand_addr;
+int var_smtp_pix_thresh;
+int var_queue_run_delay;
+int var_min_backoff_time;
+int var_smtp_pix_delay;
+int var_smtp_line_limit;
+char *var_smtp_helo_name;
+char *var_smtp_host_lookup;
+bool var_smtp_quote_821_env;
+bool var_smtp_defer_mxaddr;
+bool var_smtp_send_xforward;
+int var_smtp_mxaddr_limit;
+int var_smtp_mxsess_limit;
+int var_smtp_cache_conn;
+int var_smtp_reuse_time;
+int var_smtp_reuse_count;
+char *var_smtp_cache_dest;
+char *var_scache_service; /* You can now leave this here. */
+bool var_smtp_cache_demand;
+char *var_smtp_ehlo_dis_words;
+char *var_smtp_ehlo_dis_maps;
+char *var_smtp_addr_pref;
+
+char *var_smtp_tls_level;
+bool var_smtp_use_tls;
+bool var_smtp_enforce_tls;
+char *var_smtp_tls_per_site;
+char *var_smtp_tls_policy;
+bool var_smtp_tls_wrappermode;
+bool var_smtp_tls_conn_reuse;
+char *var_tlsproxy_service;
+
+#ifdef USE_TLS
+char *var_smtp_sasl_tls_opts;
+char *var_smtp_sasl_tlsv_opts;
+int var_smtp_starttls_tmout;
+char *var_smtp_tls_CAfile;
+char *var_smtp_tls_CApath;
+char *var_smtp_tls_chain_files;
+char *var_smtp_tls_cert_file;
+char *var_smtp_tls_mand_ciph;
+char *var_smtp_tls_excl_ciph;
+char *var_smtp_tls_mand_excl;
+char *var_smtp_tls_dcert_file;
+char *var_smtp_tls_dkey_file;
+bool var_smtp_tls_enforce_peername;
+char *var_smtp_tls_key_file;
+char *var_smtp_tls_loglevel;
+bool var_smtp_tls_note_starttls_offer;
+char *var_smtp_tls_mand_proto;
+char *var_smtp_tls_sec_cmatch;
+int var_smtp_tls_scert_vd;
+char *var_smtp_tls_vfy_cmatch;
+char *var_smtp_tls_fpt_cmatch;
+char *var_smtp_tls_fpt_dgst;
+char *var_smtp_tls_tafile;
+char *var_smtp_tls_proto;
+char *var_smtp_tls_ciph;
+char *var_smtp_tls_eccert_file;
+char *var_smtp_tls_eckey_file;
+char *var_smtp_tls_sni;
+bool var_smtp_tls_blk_early_mail_reply;
+bool var_smtp_tls_force_tlsa;
+char *var_smtp_tls_insecure_mx_policy;
+
+#endif
+
+char *var_smtp_generic_maps;
+char *var_prop_extension;
+bool var_smtp_sender_auth;
+char *var_smtp_tcp_port;
+int var_scache_proto_tmout;
+bool var_smtp_cname_overr;
+char *var_smtp_pix_bug_words;
+char *var_smtp_pix_bug_maps;
+char *var_cyrus_conf_path;
+char *var_smtp_head_chks;
+char *var_smtp_mime_chks;
+char *var_smtp_nest_chks;
+char *var_smtp_body_chks;
+char *var_smtp_resp_filter;
+bool var_lmtp_assume_final;
+char *var_smtp_dns_res_opt;
+char *var_smtp_dns_support;
+bool var_smtp_dummy_mail_auth;
+char *var_smtp_dsn_filter;
+char *var_smtp_dns_re_filter;
+bool var_smtp_balance_inet_proto;
+bool var_smtp_req_deadline;
+int var_smtp_min_data_rate;
+
+ /* Special handling of 535 AUTH errors. */
+char *var_smtp_sasl_auth_cache_name;
+int var_smtp_sasl_auth_cache_time;
+bool var_smtp_sasl_auth_soft_bounce;
+
+char *var_hfrom_format;
+bool var_smtp_bind_addr_enforce;
+
+ /*
+ * Global variables.
+ */
+int smtp_mode;
+int smtp_host_lookup_mask;
+int smtp_dns_support;
+STRING_LIST *smtp_cache_dest;
+SCACHE *smtp_scache;
+MAPS *smtp_ehlo_dis_maps;
+MAPS *smtp_generic_maps;
+int smtp_ext_prop_mask;
+unsigned smtp_dns_res_opt;
+MAPS *smtp_pix_bug_maps;
+HBC_CHECKS *smtp_header_checks; /* limited header checks */
+HBC_CHECKS *smtp_body_checks; /* limited body checks */
+SMTP_CLI_ATTR smtp_cli_attr; /* parsed command-line */
+int smtp_hfrom_format; /* postmaster notifications */
+
+#ifdef USE_TLS
+
+ /*
+ * OpenSSL client state (opaque handle)
+ */
+TLS_APPL_STATE *smtp_tls_ctx;
+int smtp_tls_insecure_mx_policy;
+
+#endif
+
+ /*
+ * IPv6 preference.
+ */
+static int smtp_addr_pref;
+
+/* get_cli_attr - get command-line attributes */
+
+static void get_cli_attr(SMTP_CLI_ATTR *attr, char **argv)
+{
+ const char myname[] = "get_cli_attr";
+ const char *last_flags = "flags="; /* i.e. empty */
+ static const BYTE_MASK flags_map[] = {
+ 'D', SMTP_CLI_FLAG_DELIVERED_TO,
+ 'O', SMTP_CLI_FLAG_ORIG_RCPT,
+ 'R', SMTP_CLI_FLAG_RETURN_PATH,
+ 'X', SMTP_CLI_FLAG_FINAL_DELIVERY,
+ 0,
+ };
+
+ /*
+ * Initialize.
+ */
+ attr->flags = 0;
+
+ /*
+ * Iterate over the command-line attribute list. Errors are fatal.
+ */
+ for ( /* void */ ; *argv != 0; argv++) {
+
+ /*
+ * flags=stuff. Errors are fatal.
+ */
+ if (strncasecmp("flags=", *argv, sizeof("flags=") - 1) == 0) {
+ last_flags = *argv;
+ if (msg_verbose)
+ msg_info("%s: %s", myname, last_flags);
+ attr->flags = byte_mask(*argv, flags_map,
+ *argv + sizeof("flags=") - 1);
+ }
+
+ /*
+ * Bad.
+ */
+ else
+ msg_fatal("unknown attribute name: %s", *argv);
+ }
+
+ /*
+ * Backwards compatibility, redundancy, and obsolescence.
+ */
+ if (!smtp_mode && var_lmtp_assume_final
+ && (attr->flags & SMTP_CLI_FLAG_FINAL_DELIVERY) == 0) {
+ attr->flags |= SMTP_CLI_FLAG_FINAL_DELIVERY;
+ msg_warn("%s is obsolete; instead, specify \"%sX\" in %s",
+ VAR_LMTP_ASSUME_FINAL, last_flags, MASTER_CONF_FILE);
+ }
+}
+
+/* deliver_message - deliver message with extreme prejudice */
+
+static int deliver_message(const char *service, DELIVER_REQUEST *request)
+{
+ SMTP_STATE *state;
+ int result;
+
+ if (msg_verbose)
+ msg_info("deliver_message: from %s", request->sender);
+
+ /*
+ * Sanity checks. The smtp server is unprivileged and chrooted, so we can
+ * afford to distribute the data censoring code, instead of having it all
+ * in one place.
+ */
+ if (request->nexthop[0] == 0)
+ msg_fatal("empty nexthop hostname");
+ if (request->rcpt_list.len <= 0)
+ msg_fatal("recipient count: %d", request->rcpt_list.len);
+
+ /*
+ * D flag checks.
+ */
+ if (smtp_cli_attr.flags & SMTP_CLI_FLAG_DELIVERED_TO) {
+
+ /*
+ * The D flag cannot be specified for multi-recipient deliveries.
+ */
+ if (request->rcpt_list.len > 1) {
+ msg_warn("flag `D' requires %s_destination_recipient_limit = 1",
+ service);
+ return (reject_deliver_request(service, request, "4.3.5",
+ "mail system configuration error"));
+ }
+
+ /*
+ * The recipient cannot appear in a Delivered-To: header.
+ */
+ else {
+ DELIVERED_HDR_INFO *delivered_info = delivered_hdr_init(
+ request->fp, request->data_offset, FOLD_ADDR_ALL);
+ VSTRING *generic_rcpt = vstring_alloc(100);
+ int have_delivered_loop;
+
+ smtp_rewrite_generic_internal(generic_rcpt,
+ request->rcpt_list.info->address);
+ have_delivered_loop = delivered_hdr_find(
+ delivered_info, STR(generic_rcpt));
+ vstring_free(generic_rcpt);
+ delivered_hdr_free(delivered_info);
+ if (have_delivered_loop) {
+ return (reject_deliver_request(service, request, "5.4.6",
+ "mail forwarding loop for %s",
+ request->rcpt_list.info->address));
+ }
+ }
+ }
+
+ /*
+ * The O flag cannot be specified for multi-recipient deliveries.
+ */
+ if ((smtp_cli_attr.flags & SMTP_CLI_FLAG_ORIG_RCPT)
+ && request->rcpt_list.len > 1) {
+ msg_warn("flag `O' requires %s_destination_recipient_limit = 1",
+ service);
+ return (reject_deliver_request(service, request, "4.3.5",
+ "mail system configuration error"));
+ }
+
+ /*
+ * Initialize. Bundle all information about the delivery request, so that
+ * we can produce understandable diagnostics when something goes wrong
+ * many levels below. The alternative would be to make everything global.
+ */
+ state = smtp_state_alloc();
+ state->request = request;
+ state->src = request->fp;
+ state->service = service;
+ state->misc_flags |= smtp_addr_pref;
+ state->debug_peer_per_nexthop =
+ debug_peer_check(request->nexthop, "noaddr");
+ SMTP_RCPT_INIT(state);
+
+ /*
+ * Establish an SMTP session and deliver this message to all requested
+ * recipients. At the end, notify the postmaster of any protocol errors.
+ * Optionally deliver mail locally when this machine is the best mail
+ * exchanger.
+ */
+ result = smtp_connect(state);
+
+ /*
+ * Clean up.
+ */
+ smtp_state_free(state);
+
+ return (result);
+}
+
+/* smtp_service - perform service for client */
+
+static void smtp_service(VSTREAM *client_stream, char *service,
+ char **unused_argv)
+{
+ DELIVER_REQUEST *request;
+ int status;
+
+ /*
+ * This routine runs whenever a client connects to the UNIX-domain socket
+ * dedicated to remote SMTP delivery service. What we see below is a
+ * little protocol to (1) tell the queue manager that we are ready, (2)
+ * read a request from the queue manager, and (3) report the completion
+ * status of that request. All connection-management stuff is handled by
+ * the common code in single_server.c.
+ */
+ if ((request = deliver_request_read(client_stream)) != 0) {
+ status = deliver_message(service, request);
+ deliver_request_done(client_stream, request, status);
+ }
+}
+
+/* post_init - post-jail initialization */
+
+static void post_init(char *unused_name, char **argv)
+{
+ static const NAME_MASK lookup_masks[] = {
+ SMTP_HOST_LOOKUP_DNS, SMTP_HOST_FLAG_DNS,
+ SMTP_HOST_LOOKUP_NATIVE, SMTP_HOST_FLAG_NATIVE,
+ 0,
+ };
+ static const NAME_MASK dns_res_opt_masks[] = {
+ SMTP_DNS_RES_OPT_DEFNAMES, RES_DEFNAMES,
+ SMTP_DNS_RES_OPT_DNSRCH, RES_DNSRCH,
+ 0,
+ };
+ static const NAME_CODE dns_support[] = {
+ SMTP_DNS_SUPPORT_DISABLED, SMTP_DNS_DISABLED,
+ SMTP_DNS_SUPPORT_ENABLED, SMTP_DNS_ENABLED,
+#if (RES_USE_DNSSEC != 0) && (RES_USE_EDNS0 != 0)
+ SMTP_DNS_SUPPORT_DNSSEC, SMTP_DNS_DNSSEC,
+#endif
+ 0, SMTP_DNS_INVALID,
+ };
+
+ if (*var_smtp_dns_support == 0) {
+ /* Backwards compatible empty setting */
+ smtp_dns_support =
+ var_disable_dns ? SMTP_DNS_DISABLED : SMTP_DNS_ENABLED;
+ } else {
+ smtp_dns_support =
+ name_code(dns_support, NAME_CODE_FLAG_NONE, var_smtp_dns_support);
+ if (smtp_dns_support == SMTP_DNS_INVALID)
+ msg_fatal("invalid %s: \"%s\"", VAR_LMTP_SMTP(DNS_SUPPORT),
+ var_smtp_dns_support);
+ var_disable_dns = (smtp_dns_support == SMTP_DNS_DISABLED);
+ }
+
+#ifdef USE_TLS
+ if (smtp_mode) {
+ smtp_tls_insecure_mx_policy =
+ tls_level_lookup(var_smtp_tls_insecure_mx_policy);
+ switch (smtp_tls_insecure_mx_policy) {
+ case TLS_LEV_MAY:
+ case TLS_LEV_ENCRYPT:
+ case TLS_LEV_DANE:
+ break;
+ default:
+ msg_fatal("invalid %s: \"%s\"", VAR_SMTP_TLS_INSECURE_MX_POLICY,
+ var_smtp_tls_insecure_mx_policy);
+ }
+ }
+#endif
+
+ /*
+ * Select hostname lookup mechanisms.
+ */
+ if (smtp_dns_support == SMTP_DNS_DISABLED)
+ smtp_host_lookup_mask = SMTP_HOST_FLAG_NATIVE;
+ else
+ smtp_host_lookup_mask =
+ name_mask(VAR_LMTP_SMTP(HOST_LOOKUP), lookup_masks,
+ var_smtp_host_lookup);
+ if (msg_verbose)
+ msg_info("host name lookup methods: %s",
+ str_name_mask(VAR_LMTP_SMTP(HOST_LOOKUP), lookup_masks,
+ smtp_host_lookup_mask));
+
+ /*
+ * Session cache instance.
+ */
+ if (*var_smtp_cache_dest || var_smtp_cache_demand)
+#if 0
+ smtp_scache = scache_multi_create();
+#else
+ smtp_scache = scache_clnt_create(var_scache_service,
+ var_scache_proto_tmout,
+ var_ipc_idle_limit,
+ var_ipc_ttl_limit);
+#endif
+
+ /*
+ * Select DNS query flags.
+ */
+ smtp_dns_res_opt = name_mask(VAR_LMTP_SMTP(DNS_RES_OPT), dns_res_opt_masks,
+ var_smtp_dns_res_opt);
+
+ /*
+ * Address verification.
+ */
+ smtp_vrfy_init();
+
+ /*
+ * Look up service command-line attributes; these do not change during
+ * the process lifetime.
+ */
+ get_cli_attr(&smtp_cli_attr, argv);
+
+ /*
+ * header_from format, for postmaster notifications.
+ */
+ smtp_hfrom_format = hfrom_format_parse(VAR_HFROM_FORMAT, var_hfrom_format);
+}
+
+/* pre_init - pre-jail initialization */
+
+static void pre_init(char *unused_name, char **unused_argv)
+{
+ int use_tls;
+ static const NAME_CODE addr_pref_map[] = {
+ INET_PROTO_NAME_IPV6, SMTP_MISC_FLAG_PREF_IPV6,
+ INET_PROTO_NAME_IPV4, SMTP_MISC_FLAG_PREF_IPV4,
+ INET_PROTO_NAME_ANY, 0,
+ 0, -1,
+ };
+
+ /*
+ * Turn on per-peer debugging.
+ */
+ debug_peer_init();
+
+ /*
+ * SASL initialization.
+ */
+ if (var_smtp_sasl_enable)
+#ifdef USE_SASL_AUTH
+ smtp_sasl_initialize();
+#else
+ msg_warn("%s is true, but SASL support is not compiled in",
+ VAR_LMTP_SMTP(SASL_ENABLE));
+#endif
+
+ if (*var_smtp_tls_level != 0)
+ switch (tls_level_lookup(var_smtp_tls_level)) {
+ case TLS_LEV_SECURE:
+ case TLS_LEV_VERIFY:
+ case TLS_LEV_DANE_ONLY:
+ case TLS_LEV_FPRINT:
+ case TLS_LEV_ENCRYPT:
+ var_smtp_use_tls = var_smtp_enforce_tls = 1;
+ break;
+ case TLS_LEV_DANE:
+ case TLS_LEV_MAY:
+ var_smtp_use_tls = 1;
+ var_smtp_enforce_tls = 0;
+ break;
+ case TLS_LEV_NONE:
+ var_smtp_use_tls = var_smtp_enforce_tls = 0;
+ break;
+ default:
+ /* tls_level_lookup() logs no warning. */
+ /* session_tls_init() assumes that var_smtp_tls_level is sane. */
+ msg_fatal("Invalid TLS level \"%s\"", var_smtp_tls_level);
+ }
+ use_tls = (var_smtp_use_tls || var_smtp_enforce_tls);
+
+ /*
+ * Initialize the TLS data before entering the chroot jail
+ */
+ if (use_tls || var_smtp_tls_per_site[0] || var_smtp_tls_policy[0]) {
+#ifdef USE_TLS
+ TLS_CLIENT_INIT_PROPS props;
+
+ tls_pre_jail_init(TLS_ROLE_CLIENT);
+
+ /*
+ * We get stronger type safety and a cleaner interface by combining
+ * the various parameters into a single tls_client_props structure.
+ *
+ * Large parameter lists are error-prone, so we emulate a language
+ * feature that C does not have natively: named parameter lists.
+ *
+ * With tlsproxy(8) turned on, this is still needed for DANE-related
+ * initializations.
+ */
+ smtp_tls_ctx =
+ TLS_CLIENT_INIT(&props,
+ log_param = VAR_LMTP_SMTP(TLS_LOGLEVEL),
+ log_level = var_smtp_tls_loglevel,
+ verifydepth = var_smtp_tls_scert_vd,
+ cache_type = LMTP_SMTP_SUFFIX(TLS_MGR_SCACHE),
+ chain_files = var_smtp_tls_chain_files,
+ cert_file = var_smtp_tls_cert_file,
+ key_file = var_smtp_tls_key_file,
+ dcert_file = var_smtp_tls_dcert_file,
+ dkey_file = var_smtp_tls_dkey_file,
+ eccert_file = var_smtp_tls_eccert_file,
+ eckey_file = var_smtp_tls_eckey_file,
+ CAfile = var_smtp_tls_CAfile,
+ CApath = var_smtp_tls_CApath,
+ mdalg = var_smtp_tls_fpt_dgst);
+ smtp_tls_list_init();
+ tls_dane_loglevel(VAR_LMTP_SMTP(TLS_LOGLEVEL), var_smtp_tls_loglevel);
+#else
+ msg_warn("TLS has been selected, but TLS support is not compiled in");
+#endif
+ }
+
+ /*
+ * Flush client.
+ */
+ flush_init();
+
+ /*
+ * Session cache domain list.
+ */
+ if (*var_smtp_cache_dest)
+ smtp_cache_dest = string_list_init(VAR_SMTP_CACHE_DEST,
+ MATCH_FLAG_RETURN,
+ var_smtp_cache_dest);
+
+ /*
+ * EHLO keyword filter.
+ */
+ if (*var_smtp_ehlo_dis_maps)
+ smtp_ehlo_dis_maps = maps_create(VAR_LMTP_SMTP(EHLO_DIS_MAPS),
+ var_smtp_ehlo_dis_maps,
+ DICT_FLAG_LOCK);
+
+ /*
+ * PIX bug workarounds.
+ */
+ if (*var_smtp_pix_bug_maps)
+ smtp_pix_bug_maps = maps_create(VAR_LMTP_SMTP(PIX_BUG_MAPS),
+ var_smtp_pix_bug_maps,
+ DICT_FLAG_LOCK);
+
+ /*
+ * Generic maps.
+ */
+ if (*var_prop_extension)
+ smtp_ext_prop_mask =
+ ext_prop_mask(VAR_PROP_EXTENSION, var_prop_extension);
+ if (*var_smtp_generic_maps)
+ smtp_generic_maps =
+ maps_create(VAR_LMTP_SMTP(GENERIC_MAPS), var_smtp_generic_maps,
+ DICT_FLAG_LOCK | DICT_FLAG_FOLD_FIX
+ | DICT_FLAG_UTF8_REQUEST);
+
+ /*
+ * Header/body checks.
+ */
+ smtp_header_checks = hbc_header_checks_create(
+ VAR_LMTP_SMTP(HEAD_CHKS), var_smtp_head_chks,
+ VAR_LMTP_SMTP(MIME_CHKS), var_smtp_mime_chks,
+ VAR_LMTP_SMTP(NEST_CHKS), var_smtp_nest_chks,
+ smtp_hbc_callbacks);
+ smtp_body_checks = hbc_body_checks_create(
+ VAR_LMTP_SMTP(BODY_CHKS), var_smtp_body_chks,
+ smtp_hbc_callbacks);
+
+ /*
+ * Server reply filter.
+ */
+ if (*var_smtp_resp_filter)
+ smtp_chat_resp_filter =
+ dict_open(var_smtp_resp_filter, O_RDONLY,
+ DICT_FLAG_LOCK | DICT_FLAG_FOLD_FIX);
+
+ /*
+ * Address family preference.
+ */
+ if (*var_smtp_addr_pref) {
+ smtp_addr_pref = name_code(addr_pref_map, NAME_CODE_FLAG_NONE,
+ var_smtp_addr_pref);
+ if (smtp_addr_pref < 0)
+ msg_fatal("bad %s value: %s", VAR_LMTP_SMTP(ADDR_PREF),
+ var_smtp_addr_pref);
+ }
+
+ /*
+ * DNS reply filter.
+ */
+ if (*var_smtp_dns_re_filter)
+ dns_rr_filter_compile(VAR_LMTP_SMTP(DNS_RE_FILTER),
+ var_smtp_dns_re_filter);
+}
+
+/* pre_accept - see if tables have changed */
+
+static void pre_accept(char *unused_name, char **unused_argv)
+{
+ const char *table;
+
+ if ((table = dict_changed_name()) != 0) {
+ msg_info("table %s has changed -- restarting", table);
+ exit(0);
+ }
+}
+
+MAIL_VERSION_STAMP_DECLARE;
+
+/* main - pass control to the single-threaded skeleton */
+
+int main(int argc, char **argv)
+{
+ char *sane_procname;
+
+#include "smtp_params.c"
+#include "lmtp_params.c"
+
+ /*
+ * Fingerprint executables and core dumps.
+ */
+ MAIL_VERSION_STAMP_ALLOCATE;
+
+ /*
+ * XXX At this point, var_procname etc. are not initialized.
+ *
+ * The process name, "smtp" or "lmtp", determines the protocol, the DSN
+ * server reply type, SASL service information lookup, and more. Prepare
+ * for the possibility there may be another personality.
+ */
+ sane_procname = sane_basename((VSTRING *) 0, argv[0]);
+ if (strcmp(sane_procname, "smtp") == 0)
+ smtp_mode = 1;
+ else if (strcmp(sane_procname, "lmtp") == 0)
+ smtp_mode = 0;
+ else
+ /* TODO: logging is not initialized. */
+ msg_fatal("unexpected process name \"%s\" - "
+ "specify \"smtp\" or \"lmtp\"", var_procname);
+
+ /*
+ * Initialize with the LMTP or SMTP parameter name space.
+ */
+ single_server_main(argc, argv, smtp_service,
+ CA_MAIL_SERVER_TIME_TABLE(smtp_mode ?
+ smtp_time_table : lmtp_time_table),
+ CA_MAIL_SERVER_INT_TABLE(smtp_mode ?
+ smtp_int_table : lmtp_int_table),
+ CA_MAIL_SERVER_STR_TABLE(smtp_mode ?
+ smtp_str_table : lmtp_str_table),
+ CA_MAIL_SERVER_BOOL_TABLE(smtp_mode ?
+ smtp_bool_table : lmtp_bool_table),
+ CA_MAIL_SERVER_NBOOL_TABLE(smtp_mode ?
+ smtp_nbool_table : lmtp_nbool_table),
+ CA_MAIL_SERVER_PRE_INIT(pre_init),
+ CA_MAIL_SERVER_POST_INIT(post_init),
+ CA_MAIL_SERVER_PRE_ACCEPT(pre_accept),
+ CA_MAIL_SERVER_BOUNCE_INIT(VAR_SMTP_DSN_FILTER,
+ &var_smtp_dsn_filter),
+ 0);
+}