From b7c15c31519dc44c1f691e0466badd556ffe9423 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 18:18:56 +0200 Subject: Adding upstream version 3.7.10. Signed-off-by: Daniel Baumann --- README_FILES/ADDRESS_VERIFICATION_README | 451 +++++++++++++++++++++++++++++++ 1 file changed, 451 insertions(+) create mode 100644 README_FILES/ADDRESS_VERIFICATION_README (limited to 'README_FILES/ADDRESS_VERIFICATION_README') diff --git a/README_FILES/ADDRESS_VERIFICATION_README b/README_FILES/ADDRESS_VERIFICATION_README new file mode 100644 index 0000000..3a7e51a --- /dev/null +++ b/README_FILES/ADDRESS_VERIFICATION_README @@ -0,0 +1,451 @@ +PPoossttffiixx AAddddrreessss VVeerriiffiiccaattiioonn HHoowwttoo + +------------------------------------------------------------------------------- + +WWAARRNNIINNGG + +Recipient address verification may cause an increased load on down-stream +servers in the case of a dictionary attack or a flood of backscatter bounces. +Sender address verification may cause your site to be denylisted by some +providers. See also the "Limitations" section below for more. + +WWhhaatt PPoossttffiixx aaddddrreessss vveerriiffiiccaattiioonn ccaann ddoo ffoorr yyoouu + +Address verification is a feature that allows the Postfix SMTP server to block +a sender (MAIL FROM) or recipient (RCPT TO) address until the address has been +verified to be deliverable. + +The technique has obvious uses to reject junk mail with an unreplyable sender +address. + +The technique is also useful to block mail for undeliverable recipients, for +example on a mail relay host that does not have a list of all the valid +recipient addresses. This prevents undeliverable junk mail from entering the +queue, so that Postfix doesn't have to waste resources trying to send MAILER- +DAEMON messages back. + +This feature is available in Postfix version 2.1 and later. + +Topics covered in this document: + + * How address verification works + * Limitations of address verification + * Recipient address verification + * Sender address verification for mail from frequently forged domains + * Sender address verification for all email + * Address verification database + * Managing the address verification database + * Controlling the routing of address verification probes + * Forced probe routing examples + * Limitations of forced probe routing + +HHooww aaddddrreessss vveerriiffiiccaattiioonn wwoorrkkss + +A Postfix MTA verifies a sender or recipient address by probing the preferred +MTAs for that address, without actually delivering mail. The preferred MTAs +could include the Postfix MTA itself, or some remote MTAs (SMTP interruptus). +Probe messages are like normal mail, except that they are never delivered, +deferred or bounced; probe messages are always discarded. + + probe Postfix + message -> mail + Postfix Postfix -> queue + Internet -> SMTP <-> verify + server server | + v + + <- Postfix + probe <- delivery -> Local + status agents -> Remote + ^ + | + v + + Address + verification + database + +With Postfix address verification turned on, normal mail will suffer only a +short delay of up to 6 seconds while an address is being verified for the first +time. Once an address status is known, the status is cached and Postfix replies +immediately. + +When verification takes too long the Postfix SMTP server defers the sender or +recipient address with a 450 reply. Normal mail clients will connect again +after some delay. The address verification delay is configurable with the +main.cf address_verify_poll_count and address_verify_poll_delay parameters. See +postconf(5) for details. + +LLiimmiittaattiioonnss ooff aaddddrreessss vveerriiffiiccaattiioonn + + * Postfix assumes that a remote SMTP server will reject unknown addresses in + reply to the RCPT TO command. However, some sites report this in reply to + the DATA command. For such sites you may configure a workaround with the + smtp_address_verify_target parameter (Postfix 3.0 and later). + + * When verifying a remote address, Postfix probes the preferred MTAs for that + address, without actually delivering mail. If a preferred MTA accepts the + address, then Postfix assumes that the address is deliverable. In reality, + mail for a remote address can bounce AFTER a preferred MTA accepts the + recipient address, or AFTER a preferred MTA accepts the message content. + + * Some sites may denylist you when you are probing them too often (a probe is + an SMTP session that does not deliver mail), or when you are probing them + too often for a non-existent address. This is one reason why you should use + sender address verification sparingly, if at all, when your site receives + lots of email. + + * Normally, address verification probe messages follow the same path as + regular mail. However, some sites send mail to the Internet via an + intermediate relayhost; this breaks address verification. See below, + section "Controlling the routing of address verification probes", for how + to override mail routing and for possible limitations when you have to do + this. + + * Postfix assumes that an address is undeliverable when a preferred MTA for + the address rejects the probe, regardless of the reason for rejection + (client rejected, HELO rejected, MAIL FROM rejected, etc.). Thus, Postfix + rejects an address when a preferred MTA for that address rejects mail from + your machine for any reason. This is not a limitation, but it is mentioned + here just in case people believe that it is a limitation. + + * Unfortunately, some sites do not reject unknown addresses in reply to the + RCPT TO or DATA command, but instead report a delivery failure in response + to end of DATA after a message is transferred. Postfix address verification + does not work with such sites. + + * By default, Postfix probe messages have a sender address "double- + bounce@$myorigin" (with Postfix versions before 2.5, the default is + "postmaster@$myorigin"). This is SAFE because the Postfix SMTP server does + not reject mail for this address. + + You can change the probe sender address into the null address + ("address_verify_sender ="). This is UNSAFE because address probes will + fail with mis-configured sites that reject MAIL FROM: <>, while probes from + "double-bounce@$myorigin" would succeed. + + * The downside of using a non-empty sender address is that the address may + end up on spammer mailing lists. Although Postfix always discards mail to + the double-bounce address, this still results in wasted network bandwidth + and server capacity. To defeat address harvesting, Postfix 2.9 and later + support time-dependent sender addresses when you specify a non-zero + address_verify_sender_ttl value. + +RReecciippiieenntt aaddddrreessss vveerriiffiiccaattiioonn + +As mentioned earlier, recipient address verification is useful to block mail +for undeliverable recipients on a mail relay host that does not have a list of +all valid recipient addresses. This can help to prevent the mail queue from +filling up with MAILER-DAEMON messages. + +Recipient address verification is relatively straightforward and there are no +surprises. If a recipient probe fails, then Postfix rejects mail for the +recipient address. If a recipient probe succeeds, then Postfix accepts mail for +the recipient address. However, recipient address verification probes can +increase the load on down-stream MTAs when you're being flooded by backscatter +bounces, or when some spammer is mounting a dictionary attack. + +By default, address verification results are saved in a persistent database +(Postfix version 2.7 and later; with earlier versions, specify the database in +main.cf as described later). The persistent database helps to avoid probing the +same address repeatedly. + + /etc/postfix/main.cf: + smtpd_recipient_restrictions = + permit_mynetworks + # reject_unauth_destination is not needed here if the mail + # relay policy is specified under smtpd_relay_restrictions + # (available with Postfix 2.10 and later). + reject_unauth_destination + ... + reject_unknown_recipient_domain + reject_unverified_recipient + ... + # Postfix 2.6 and later privacy feature. + # unverified_recipient_reject_reason = Address lookup failed + + # Postfix 3.2 and earlier workaround. + # Do not set enable_original_recipient=no. This prevents Postfix + # from saving the recipient address verification result under + # the original address, when the address verification probe + # message goes through address aliasing or canonical mapping. + +The "reject_unknown_recipient_domain" restriction blocks mail for non-existent +domains. Putting this before "reject_unverified_recipient" avoids the overhead +of generating unnecessary probe messages. + +The unverified_recipient_reject_code parameter (default 450) specifies the +numerical Postfix SMTP server reply code when a recipient address is known to +bounce. Change this setting into 550 when you trust Postfix's judgments. + +The following features are available in Postfix 2.6 and later. + +The unverified_recipient_defer_code parameter (default 450) specifies the +numerical Postfix SMTP server reply code when a recipient address probe fails +with some temporary error. Some sites insist on changing this into 250. NOTE: +This change turns MX servers into backscatter sources when the load is high. + +The unverified_recipient_reject_reason parameter (default: empty) specifies +fixed text that Postfix will send to remote SMTP clients, instead of sending +actual address verification details. Do not specify the SMTP status code or +enhanced status code. + +The unverified_recipient_tempfail_action parameter (default: defer_if_permit) +specifies the Postfix SMTP server action when a recipient address verification +probe fails with some temporary error. + +SSeennddeerr aaddddrreessss vveerriiffiiccaattiioonn ffoorr mmaaiill ffrroomm ffrreeqquueennttllyy ffoorrggeedd ddoommaaiinnss + +Only for very small sites, it is relatively safe to turn on sender address +verification for specific domains that often appear in forged email. + + /etc/postfix/main.cf: + smtpd_sender_restrictions = hash:/etc/postfix/sender_access + unverified_sender_reject_code = 550 + # Postfix 2.6 and later. + # unverified_sender_defer_code = 250 + + # Default setting for Postfix 2.7 and later. + # Note 1: Be sure to read the "Caching" section below! + # Note 2: Avoid hash files here. Use btree or lmdb instead. + address_verify_map = btree:/var/lib/postfix/verify + + # Postfix 3.2 and earlier workaround. + # Do not set enable_original_recipient=no. This prevents Postfix + # from saving the sender address verification result under the + # original address, when the address verification probe message + # goes through address aliasing or canonical mapping. + + /etc/postfix/sender_access: + # Don't do this when you handle lots of email. + aol.com reject_unverified_sender + hotmail.com reject_unverified_sender + bigfoot.com reject_unverified_sender + ... etcetera ... + +At some point in cyberspace/time, a list of frequently forged MAIL FROM domains +could be found at http://www.monkeys.com/anti-spam/filtering/sender-domain- +validate.in. + +NOTE: One of the first things you might want to do is to turn on sender address +verification for all your own domains. + +SSeennddeerr aaddddrreessss vveerriiffiiccaattiioonn ffoorr aallll eemmaaiill + +Unfortunately, sender address verification cannot simply be turned on for all +email - you are likely to lose legitimate mail from mis-configured systems. You +almost certainly will have to set up allow lists for specific addresses, or +even for entire domains. + +To find out how sender address verification would affect your mail, specify +"warn_if_reject reject_unverified_sender" so that you can see what mail would +be blocked: + + /etc/postfix/main.cf: + smtpd_sender_restrictions = + permit_mynetworks + ... + check_sender_access hash:/etc/postfix/sender_access + reject_unknown_sender_domain + warn_if_reject reject_unverified_sender + ... + # Postfix 2.6 and later. + # unverified_sender_reject_reason = Address verification failed + + # Default setting for Postfix 2.7 and later. + # Note 1: Be sure to read the "Caching" section below! + # Note 2: Avoid hash files here. Use btree or lmdb instead. + address_verify_map = btree:/var/lib/postfix/verify + +This is also a good way to populate your cache with address verification +results before you start to actually reject mail. + +The sender_access restriction is needed to allowlist domains or addresses that +are known to be OK. Although Postfix will not mark a known-to-be-good address +as bad after a probe fails, it is better to be safe than sorry. + +NOTE: You will have to allowlist sites such as securityfocus.com and other +sites that operate mailing lists that use a different sender address for each +posting (VERP). Such addresses pollute the address verification cache quickly, +and generate unnecessary sender verification probes. + + /etc/postfix/sender_access + securityfocus.com OK + ... + +The "reject_unknown_sender_domain" restriction blocks mail from non-existent +domains. Putting this before "reject_unverified_sender" avoids the overhead of +generating unnecessary probe messages. + +The unverified_sender_reject_code parameter (default 450) specifies the +numerical Postfix server reply code when a sender address is known to bounce. +Change this setting into 550 when you trust Postfix's judgments. + +The following features are available in Postfix 2.6 and later. + +The unverified_sender_defer_code parameter (default 450) specifies the +numerical Postfix SMTP server reply code when a sender address verification +probe fails with some temporary error. Specify a valid 2xx or 4xx code. + +The unverified_sender_reject_reason parameter (default: empty) specifies fixed +text that Postfix will send to remote SMTP clients, instead of sending actual +address verification details. Do not specify the SMTP status code or enhanced +status code. + +The unverified_sender_tempfail_action parameter (default: defer_if_permit) +specifies the Postfix SMTP server action when a sender address verification +probe fails with some temporary error. + +AAddddrreessss vveerriiffiiccaattiioonn ddaattaabbaassee + +To improve performance, the Postfix verify(8) daemon can save address +verification results to a persistent database. This is enabled by default with +Postfix 2.7 and later. The address_verify_map (NOTE: singular) configuration +parameter specifies persistent storage for sender or recipient address +verification results. If you specify an empty value, all address verification +results are lost after "postfix reload" or "postfix stop". + + # Example 1: Default setting for Postfix 2.7 and later. + # Note: avoid hash files here. Use btree or lmdb instead. + /etc/postfix/main.cf: + address_verify_map = btree:$data_directory/verify_cache + + # Example 2: Shared persistent lmdb: cache (Postfix 2.11 or later). + # Disable automatic cache cleanup in all Postfix instances except + # for one instance that will be responsible for cache cleanup. + /etc/postfix/main.cf: + address_verify_map = lmdb:$data_directory/verify_cache + # address_verify_cache_cleanup_interval = 0 + + # Example 3: Shared persistent btree: cache (Postfix 2.9 or later). + # Disable automatic cache cleanup in all Postfix instances except + # for one instance that will be responsible for cache cleanup. + /etc/postfix/main.cf: + address_verify_map = proxy:btree:$data_directory/verify_cache + # address_verify_cache_cleanup_interval = 0 + + # Example 4: Shared memory cache (requires Postfix 2.9 or later). + # Disable automatic cache cleanup in all Postfix instances. + # See memcache_table(5) for details. + /etc/postfix/main.cf: + address_verify_map = memcache:/etc/postfix/verify-memcache.cf + address_verify_cache_cleanup_interval = 0 + + # Example 5: Default setting for Postfix 2.6 and earlier. + # This uses non-persistent storage only. + /etc/postfix/main.cf: + address_verify_map = + +NOTE 1: The database file should be stored under a Postfix-owned directory, +such as $data_directory. + + As of version 2.5, Postfix no longer uses root privileges when opening this + file. To maintain backwards compatibility, an attempt to open the file + under a non-Postfix directory is redirected to the Postfix-owned + data_directory, and a warning is logged. If you wish to continue using a + pre-existing database file, change its file ownership to the account + specified with the mail_owner parameter, and either move the file to the + data_directory, or move it to some other Postfix-owned directory. + +NOTE 2: Do not put this file in a file system that may run out of space. When +the address verification table gets corrupted the world comes to an end and YOU +will have to MANUALLY fix things as described in the next section. Meanwhile, +you will not receive mail via SMTP. + +NOTE 3: The verify(8) daemon will create a new database when none exists. It +will open or create the file before entering the chroot jail. + +MMaannaaggiinngg tthhee aaddddrreessss vveerriiffiiccaattiioonn ddaattaabbaassee + +The verify(8) manual page describes parameters that control how long address +verification results are cached before they need to be refreshed, and how long +results can remain "unrefreshed" before they expire. Postfix uses different +controls for positive results (address was accepted) and for negative results +(address was rejected, or address verification failed for some other reason). + +The verify(8) daemon will periodically remove expired entries from the address +verification database, and log the number of entries retained and dropped +(Postfix versions 2.7 and later). A cleanup run is logged as "partial" when the +daemon terminates early because of "postfix reload, "postfix stop", or because +the daemon received no requests for $max_idle seconds. Postfix versions 2.6 and +earlier do not implement automatic address verification database cleanup. +There, the database is managed manually as described next. + +When the address verification database file becomes too big, or when it becomes +corrupted, the solution is to manually rename or delete (NOT: truncate) the +file and run "postfix reload". The verify(8) daemon will then create a new +database file. + +CCoonnttrroolllliinngg tthhee rroouuttiinngg ooff aaddddrreessss vveerriiffiiccaattiioonn pprroobbeess + +By default, Postfix sends address verification probe messages via the same +route as regular mail, because that normally produces the most accurate result. +It's no good to verify a local address by connecting to your own SMTP port; +that just triggers all kinds of mailer loop alarms. The same is true for any +destination that your machine is best MX host for: hidden domains, virtual +domains, etc. + +However, some sites have a complex infrastructure where mail is not sent +directly to the Internet, but is instead given to an intermediate relayhost. +This is a problem for address verification, because remote Internet addresses +can be verified only when Postfix can access remote destinations directly. + +For this reason, Postfix allows you to override the routing parameters when it +delivers an address verification probe message. + +First, the address_verify_relayhost parameter allows you to override the +relayhost setting, and the address_verify_transport_maps parameter allows you +to override the transport_maps setting. The +address_verify_sender_dependent_relayhost_maps parameter does the same for +sender-dependent relayhost selection. + +Second, each address class is given its own address verification version of the +message delivery transport, as shown in the table below. Address classes are +defined in the ADDRESS_CLASS_README file. + + _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ + |DDoommaaiinn lliisstt |RReegguullaarr ttrraannssppoorrtt|VVeerriiffyy ttrraannssppoorrtt | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |mydestination |local_transport |address_verify_local_transport | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |virtual_alias_domains |(not applicable) |(not applicable) | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |virtual_mailbox_domains|virtual_transport|address_verify_virtual_transport| + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |relay_domains |relay_transport |address_verify_relay_transport | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |(not applicable) |default_transport|address_verify_default_transport| + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + +By default, the parameters that control delivery of address probes have the +same value as the parameters that control normal mail delivery. + +FFoorrcceedd pprroobbee rroouuttiinngg eexxaammpplleess + +In a typical scenario one would override the relayhost setting for address +verification probes and leave everything else alone: + + /etc/postfix/main.cf: + relayhost = $mydomain + address_verify_relayhost = + ... + +Sites behind a network address translation box might have to use a different +SMTP client that sends the correct hostname information: + + /etc/postfix/main.cf: + relayhost = $mydomain + address_verify_relayhost = + address_verify_default_transport = direct_smtp + + /etc/postfix/master.cf: + direct_smtp .. .. .. .. .. .. .. .. .. smtp + -o smtp_helo_name=nat.box.tld + +LLiimmiittaattiioonnss ooff ffoorrcceedd pprroobbee rroouuttiinngg + +Inconsistencies can happen when probe messages don't follow the same path as +regular mail. For example, a message can be accepted when it follows the +regular route while an otherwise identical probe message is rejected when it +follows the forced route. The opposite can happen, too, but is less likely. + -- cgit v1.2.3