From c77311c90aa045796b3adcd021e69901022f4649 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 16:51:56 +0200 Subject: Adding upstream version 8.2. Signed-off-by: Daniel Baumann --- doc/readline.3 | 1597 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1597 insertions(+) create mode 100644 doc/readline.3 (limited to 'doc/readline.3') diff --git a/doc/readline.3 b/doc/readline.3 new file mode 100644 index 0000000..77ef02a --- /dev/null +++ b/doc/readline.3 @@ -0,0 +1,1597 @@ +.\" +.\" MAN PAGE COMMENTS to +.\" +.\" Chet Ramey +.\" Information Network Services +.\" Case Western Reserve University +.\" chet.ramey@case.edu +.\" +.\" Last Change: Mon Sep 19 11:11:22 EDT 2022 +.\" +.TH READLINE 3 "2022 September 19" "GNU Readline 8.2" +.\" +.\" File Name macro. This used to be `.PN', for Path Name, +.\" but Sun doesn't seem to like that very much. +.\" +.de FN +\fI\|\\$1\|\fP +.. +.SH NAME +readline \- get a line from a user with editing +.SH SYNOPSIS +.LP +.nf +.ft B +#include +#include +#include +.ft +.fi +.LP +.nf +\fIchar *\fP +.br +\fBreadline\fP (\fIconst char *prompt\fP); +.fi +.SH COPYRIGHT +.if n Readline is Copyright (C) 1989\-2020 Free Software Foundation, Inc. +.if t Readline is Copyright \(co 1989\-2020 Free Software Foundation, Inc. +.SH DESCRIPTION +.LP +.B readline +will read a line from the terminal +and return it, using +.B prompt +as a prompt. If +.B prompt +is \fBNULL\fP or the empty string, no prompt is issued. +The line returned is allocated with +.IR malloc (3); +the caller must free it when finished. The line returned +has the final newline removed, so only the text of the line +remains. +.LP +.B readline +offers editing capabilities while the user is entering the +line. +By default, the line editing commands +are similar to those of emacs. +A vi\-style line editing interface is also available. +.LP +This manual page describes only the most basic use of \fBreadline\fP. +Much more functionality is available; see +\fIThe GNU Readline Library\fP and \fIThe GNU History Library\fP +for additional information. +.SH RETURN VALUE +.LP +.B readline +returns the text of the line read. A blank line +returns the empty string. If +.B EOF +is encountered while reading a line, and the line is empty, +.B NULL +is returned. If an +.B EOF +is read with a non\-empty line, it is +treated as a newline. +.SH NOTATION +.LP +An Emacs-style notation is used to denote +keystrokes. Control keys are denoted by C\-\fIkey\fR, e.g., C\-n +means Control\-N. Similarly, +.I meta +keys are denoted by M\-\fIkey\fR, so M\-x means Meta\-X. (On keyboards +without a +.I meta +key, M\-\fIx\fP means ESC \fIx\fP, i.e., press the Escape key +then the +.I x +key. This makes ESC the \fImeta prefix\fP. +The combination M\-C\-\fIx\fP means ESC\-Control\-\fIx\fP, +or press the Escape key +then hold the Control key while pressing the +.I x +key.) +.PP +Readline commands may be given numeric +.IR arguments , +which normally act as a repeat count. Sometimes, however, it is the +sign of the argument that is significant. Passing a negative argument +to a command that acts in the forward direction (e.g., \fBkill\-line\fP) +causes that command to act in a backward direction. +Commands whose behavior with arguments deviates from this are noted +below. +.PP +When a command is described as \fIkilling\fP text, the text +deleted is saved for possible future retrieval +(\fIyanking\fP). The killed text is saved in a +\fIkill ring\fP. Consecutive kills cause the text to be +accumulated into one unit, which can be yanked all at once. +Commands which do not kill text separate the chunks of text +on the kill ring. +.SH INITIALIZATION FILE +.LP +Readline is customized by putting commands in an initialization +file (the \fIinputrc\fP file). +The name of this file is taken from the value of the +.B INPUTRC +environment variable. If that variable is unset, the default is +.IR ~/.inputrc . +If that file does not exist or cannot be read, the ultimate default is +.IR /etc/inputrc . +When a program which uses the readline library starts up, the +init file is read, and the key bindings and variables are set. +There are only a few basic constructs allowed in the +readline init file. Blank lines are ignored. +Lines beginning with a \fB#\fP are comments. +Lines beginning with a \fB$\fP indicate conditional constructs. +Other lines denote key bindings and variable settings. +Each program using this library may add its own commands +and bindings. +.PP +For example, placing +.RS +.PP +M\-Control\-u: universal\-argument +.RE +or +.RS +C\-Meta\-u: universal\-argument +.RE +.sp +into the +.I inputrc +would make M\-C\-u execute the readline command +.IR universal\-argument . +.PP +The following symbolic character names are recognized while +processing key bindings: +.IR DEL , +.IR ESC , +.IR ESCAPE , +.IR LFD , +.IR NEWLINE , +.IR RET , +.IR RETURN , +.IR RUBOUT , +.IR SPACE , +.IR SPC , +and +.IR TAB . +.PP +In addition to command names, readline allows keys to be bound +to a string that is inserted when the key is pressed (a \fImacro\fP). +.PP +.SS Key Bindings +The syntax for controlling key bindings in the +.I inputrc +file is simple. All that is required is the name of the +command or the text of a macro and a key sequence to which +it should be bound. The name may be specified in one of two ways: +as a symbolic key name, possibly with \fIMeta\-\fP or \fIControl\-\fP +prefixes, or as a key sequence. +The name and key sequence are separated by a colon. There can be no +whitespace between the name and the colon. +.PP +When using the form \fBkeyname\fP:\^\fIfunction-name\fP or \fImacro\fP, +.I keyname +is the name of a key spelled out in English. For example: +.sp +.RS +Control\-u: universal\-argument +.br +Meta\-Rubout: backward\-kill\-word +.br +Control\-o: "> output" +.RE +.LP +In the above example, +.I C\-u +is bound to the function +.BR universal\-argument , +.I M-DEL +is bound to the function +.BR backward\-kill\-word , +and +.I C\-o +is bound to run the macro +expressed on the right hand side (that is, to insert the text +.if t \f(CW> output\fP +.if n ``> output'' +into the line). +.PP +In the second form, \fB"keyseq"\fP:\^\fIfunction\-name\fP or \fImacro\fP, +.B keyseq +differs from +.B keyname +above in that strings denoting +an entire key sequence may be specified by placing the sequence +within double quotes. Some GNU Emacs style key escapes can be +used, as in the following example, but the symbolic character names +are not recognized. +.sp +.RS +"\eC\-u": universal\-argument +.br +"\eC\-x\eC\-r": re\-read\-init\-file +.br +"\ee[11~": "Function Key 1" +.RE +.PP +In this example, +.I C-u +is again bound to the function +.BR universal\-argument . +.I "C-x C-r" +is bound to the function +.BR re\-read\-init\-file , +and +.I "ESC [ 1 1 ~" +is bound to insert the text +.if t \f(CWFunction Key 1\fP. +.if n ``Function Key 1''. +.PP +The full set of GNU Emacs style escape sequences available when specifying +key sequences is +.RS +.PD 0 +.TP +.B \eC\- +control prefix +.TP +.B \eM\- +meta prefix +.TP +.B \ee +an escape character +.TP +.B \e\e +backslash +.TP +.B \e" +literal ", a double quote +.TP +.B \e' +literal ', a single quote +.RE +.PD +.PP +In addition to the GNU Emacs style escape sequences, a second +set of backslash escapes is available: +.RS +.PD 0 +.TP +.B \ea +alert (bell) +.TP +.B \eb +backspace +.TP +.B \ed +delete +.TP +.B \ef +form feed +.TP +.B \en +newline +.TP +.B \er +carriage return +.TP +.B \et +horizontal tab +.TP +.B \ev +vertical tab +.TP +.B \e\fInnn\fP +the eight-bit character whose value is the octal value \fInnn\fP +(one to three digits) +.TP +.B \ex\fIHH\fP +the eight-bit character whose value is the hexadecimal value \fIHH\fP +(one or two hex digits) +.RE +.PD +.PP +When entering the text of a macro, single or double quotes should +be used to indicate a macro definition. Unquoted text +is assumed to be a function name. +In the macro body, the backslash escapes described above are expanded. +Backslash will quote any other character in the macro text, +including " and '. +.PP +.B Bash +allows the current readline key bindings to be displayed or modified +with the +.B bind +builtin command. The editing mode may be switched during interactive +use by using the +.B \-o +option to the +.B set +builtin command. Other programs using this library provide +similar mechanisms. The +.I inputrc +file may be edited and re-read if a program does not provide +any other means to incorporate new bindings. +.SS Variables +Readline has variables that can be used to further customize its +behavior. A variable may be set in the +.I inputrc +file with a statement of the form +.RS +.PP +\fBset\fP \fIvariable\-name\fP \fIvalue\fP +.RE +.PP +Except where noted, readline variables can take the values +.B On +or +.B Off +(without regard to case). +Unrecognized variable names are ignored. +When a variable value is read, empty or null values, "on" (case-insensitive), +and "1" are equivalent to \fBOn\fP. All other values are equivalent to +\fBOff\fP. +The variables and their default values are: +.PP +.PD 0 +.TP +.B active\-region\-start\-color +A string variable that controls the text color and background when displaying +the text in the active region (see the description of +\fBenable\-active\-region\fP below). +This string must not take up any physical character positions on the display, +so it should consist only of terminal escape sequences. +It is output to the terminal before displaying the text in the active region. +This variable is reset to the default value whenever the terminal type changes. +The default value is the string that puts the terminal in standout mode, +as obtained from the terminal's terminfo description. +A sample value might be \f(CW"\ee[01;33m"\fP. +.TP +.B active\-region\-end\-color +A string variable that "undoes" the effects of \fBactive\-region\-start\-color\fP +and restores "normal" terminal display appearance after displaying text +in the active region. +This string must not take up any physical character positions on the display, +so it should consist only of terminal escape sequences. +It is output to the terminal after displaying the text in the active region. +This variable is reset to the default value whenever the terminal type changes. +The default value is the string that restores the terminal from standout mode, +as obtained from the terminal's terminfo description. +A sample value might be \f(CW"\ee[0m\fP". +.TP +.B bell\-style (audible) +Controls what happens when readline wants to ring the terminal bell. +If set to \fBnone\fP, readline never rings the bell. If set to +\fBvisible\fP, readline uses a visible bell if one is available. +If set to \fBaudible\fP, readline attempts to ring the terminal's bell. +.TP +.B bind\-tty\-special\-chars (On) +If set to \fBOn\fP (the default), readline attempts to bind the control +characters treated specially by the kernel's terminal driver to their +readline equivalents. +.TP +.B blink\-matching\-paren (Off) +If set to \fBOn\fP, readline attempts to briefly move the cursor to an +opening parenthesis when a closing parenthesis is inserted. +.TP +.B colored\-completion\-prefix (Off) +If set to \fBOn\fP, when listing completions, readline displays the +common prefix of the set of possible completions using a different color. +The color definitions are taken from the value of the \fBLS_COLORS\fP +environment variable. +If there is a color definition in \fB$LS_COLORS\fP for the custom suffix +"readline-colored-completion-prefix", readline uses this color for +the common prefix instead of its default. +.TP +.B colored\-stats (Off) +If set to \fBOn\fP, readline displays possible completions using different +colors to indicate their file type. +The color definitions are taken from the value of the \fBLS_COLORS\fP +environment variable. +.TP +.B comment\-begin (``#'') +The string that is inserted in \fBvi\fP mode when the +.B insert\-comment +command is executed. +This command is bound to +.B M\-# +in emacs mode and to +.B # +in vi command mode. +.TP +.B completion\-display\-width (\-1) +The number of screen columns used to display possible matches +when performing completion. +The value is ignored if it is less than 0 or greater than the terminal +screen width. +A value of 0 will cause matches to be displayed one per line. +The default value is \-1. +.TP +.B completion\-ignore\-case (Off) +If set to \fBOn\fP, readline performs filename matching and completion +in a case\-insensitive fashion. +.TP +.B completion\-map\-case (Off) +If set to \fBOn\fP, and \fBcompletion\-ignore\-case\fP is enabled, readline +treats hyphens (\fI\-\fP) and underscores (\fI_\fP) as equivalent when +performing case\-insensitive filename matching and completion. +.TP +.B completion\-prefix\-display\-length (0) +The length in characters of the common prefix of a list of possible +completions that is displayed without modification. When set to a +value greater than zero, common prefixes longer than this value are +replaced with an ellipsis when displaying possible completions. +.TP +.B completion\-query\-items (100) +This determines when the user is queried about viewing +the number of possible completions +generated by the \fBpossible\-completions\fP command. +It may be set to any integer value greater than or equal to zero. +If the number of possible completions is greater than +or equal to the value of this variable, +readline will ask whether or not the user wishes to view them; +otherwise they are simply listed +on the terminal. +A negative value causes readline to never ask. +.TP +.B convert\-meta (On) +If set to \fBOn\fP, readline will convert characters with the +eighth bit set to an ASCII key sequence +by stripping the eighth bit and prefixing it with an +escape character (in effect, using escape as the \fImeta prefix\fP). +The default is \fIOn\fP, but readline will set it to \fIOff\fP if the +locale contains eight-bit characters. +This variable is dependent on the \fBLC_CTYPE\fP locale category, and +may change if the locale is changed. +.TP +.B disable\-completion (Off) +If set to \fBOn\fP, readline will inhibit word completion. Completion +characters will be inserted into the line as if they had been +mapped to \fBself-insert\fP. +.TP +.B echo\-control\-characters (On) +When set to \fBOn\fP, on operating systems that indicate they support it, +readline echoes a character corresponding to a signal generated from the +keyboard. +.TP +.B editing\-mode (emacs) +Controls whether readline begins with a set of key bindings similar +to \fIEmacs\fP or \fIvi\fP. +.B editing\-mode +can be set to either +.B emacs +or +.BR vi . +.TP +.B emacs\-mode\-string (@) +If the \fIshow\-mode\-in\-prompt\fP variable is enabled, +this string is displayed immediately before the last line of the primary +prompt when emacs editing mode is active. The value is expanded like a +key binding, so the standard set of meta- and control prefixes and +backslash escape sequences is available. +Use the \e1 and \e2 escapes to begin and end sequences of +non-printing characters, which can be used to embed a terminal control +sequence into the mode string. +.TP +.B enable\-active\-region (On) +The \fIpoint\fP is the current cursor position, and \fImark\fP refers +to a saved cursor position. +The text between the point and mark is referred to as the \fIregion\fP. +When this variable is set to \fIOn\fP, readline allows certain commands +to designate the region as \fIactive\fP. +When the region is active, readline highlights the text in the region using +the value of the \fBactive\-region\-start\-color\fP, which defaults to the +string that enables +the terminal's standout mode. +The active region shows the text inserted by bracketed-paste and any +matching text found by incremental and non-incremental history searches. +.TP +.B enable\-bracketed\-paste (On) +When set to \fBOn\fP, readline configures the terminal to insert each +paste into the editing buffer as a single string of characters, instead +of treating each character as if it had been read from the keyboard. +This prevents readline from executing any editing commands bound to key +sequences appearing in the pasted text. +.TP +.B enable\-keypad (Off) +When set to \fBOn\fP, readline will try to enable the application +keypad when it is called. Some systems need this to enable the +arrow keys. +.TP +.B enable\-meta\-key (On) +When set to \fBOn\fP, readline will try to enable any meta modifier +key the terminal claims to support when it is called. On many terminals, +the meta key is used to send eight-bit characters. +.TP +.B expand\-tilde (Off) +If set to \fBOn\fP, tilde expansion is performed when readline +attempts word completion. +.TP +.B history\-preserve\-point (Off) +If set to \fBOn\fP, the history code attempts to place point at the +same location on each history line retrieved with \fBprevious-history\fP +or \fBnext-history\fP. +.TP +.B history\-size (unset) +Set the maximum number of history entries saved in the history list. +If set to zero, any existing history entries are deleted and no new entries +are saved. +If set to a value less than zero, the number of history entries is not +limited. +By default, the number of history entries is not limited. +If an attempt is made to set \fIhistory\-size\fP to a non-numeric value, +the maximum number of history entries will be set to 500. +.TP +.B horizontal\-scroll\-mode (Off) +When set to \fBOn\fP, makes readline use a single line for display, +scrolling the input horizontally on a single screen line when it +becomes longer than the screen width rather than wrapping to a new line. +This setting is automatically enabled for terminals of height 1. +.TP +.B input\-meta (Off) +If set to \fBOn\fP, readline will enable eight-bit input (that is, +it will not clear the eighth bit in the characters it reads), +regardless of what the terminal claims it can support. The name +.B meta\-flag +is a synonym for this variable. +The default is \fIOff\fP, but readline will set it to \fIOn\fP if the +locale contains eight-bit characters. +This variable is dependent on the \fBLC_CTYPE\fP locale category, and +may change if the locale is changed. +.TP +.B isearch\-terminators (``C\-[ C\-J'') +The string of characters that should terminate an incremental +search without subsequently executing the character as a command. +If this variable has not been given a value, the characters +\fIESC\fP and \fIC\-J\fP will terminate an incremental search. +.TP +.B keymap (emacs) +Set the current readline keymap. The set of legal keymap names is +\fIemacs, emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move, +vi-command\fP, and +.IR vi-insert . +\fIvi\fP is equivalent to \fIvi-command\fP; \fIemacs\fP is +equivalent to \fIemacs-standard\fP. The default value is +.IR emacs . +The value of +.B editing\-mode +also affects the default keymap. +.TP +.B keyseq\-timeout (500) +Specifies the duration \fIreadline\fP will wait for a character when reading an +ambiguous key sequence (one that can form a complete key sequence using +the input read so far, or can take additional input to complete a longer +key sequence). +If no input is received within the timeout, \fIreadline\fP will use the shorter +but complete key sequence. +The value is specified in milliseconds, so a value of 1000 means that +\fIreadline\fP will wait one second for additional input. +If this variable is set to a value less than or equal to zero, or to a +non-numeric value, \fIreadline\fP will wait until another key is pressed to +decide which key sequence to complete. +.TP +.B mark\-directories (On) +If set to \fBOn\fP, completed directory names have a slash +appended. +.TP +.B mark\-modified\-lines (Off) +If set to \fBOn\fP, history lines that have been modified are displayed +with a preceding asterisk (\fB*\fP). +.TP +.B mark\-symlinked\-directories (Off) +If set to \fBOn\fP, completed names which are symbolic links to directories +have a slash appended (subject to the value of +\fBmark\-directories\fP). +.TP +.B match\-hidden\-files (On) +This variable, when set to \fBOn\fP, causes readline to match files whose +names begin with a `.' (hidden files) when performing filename +completion. +If set to \fBOff\fP, the leading `.' must be +supplied by the user in the filename to be completed. +.TP +.B menu\-complete\-display\-prefix (Off) +If set to \fBOn\fP, menu completion displays the common prefix of the +list of possible completions (which may be empty) before cycling through +the list. +.TP +.B output\-meta (Off) +If set to \fBOn\fP, readline will display characters with the +eighth bit set directly rather than as a meta-prefixed escape +sequence. +The default is \fIOff\fP, but readline will set it to \fIOn\fP if the +locale contains eight-bit characters. +This variable is dependent on the \fBLC_CTYPE\fP locale category, and +may change if the locale is changed. +.TP +.B page\-completions (On) +If set to \fBOn\fP, readline uses an internal \fImore\fP-like pager +to display a screenful of possible completions at a time. +.TP +.B print\-completions\-horizontally (Off) +If set to \fBOn\fP, readline will display completions with matches +sorted horizontally in alphabetical order, rather than down the screen. +.TP +.B revert\-all\-at\-newline (Off) +If set to \fBOn\fP, readline will undo all changes to history lines +before returning when \fBaccept\-line\fP is executed. By default, +history lines may be modified and retain individual undo lists across +calls to \fBreadline\fP. +.TP +.B show\-all\-if\-ambiguous (Off) +This alters the default behavior of the completion functions. If +set to +.BR On , +words which have more than one possible completion cause the +matches to be listed immediately instead of ringing the bell. +.TP +.B show\-all\-if\-unmodified (Off) +This alters the default behavior of the completion functions in +a fashion similar to \fBshow\-all\-if\-ambiguous\fP. +If set to +.BR On , +words which have more than one possible completion without any +possible partial completion (the possible completions don't share +a common prefix) cause the matches to be listed immediately instead +of ringing the bell. +.TP +.B show\-mode\-in\-prompt (Off) +If set to \fBOn\fP, add a string to the beginning of the prompt +indicating the editing mode: emacs, vi command, or vi insertion. +The mode strings are user-settable (e.g., \fIemacs\-mode\-string\fP). +.TP +.B skip\-completed\-text (Off) +If set to \fBOn\fP, this alters the default completion behavior when +inserting a single match into the line. It's only active when +performing completion in the middle of a word. If enabled, readline +does not insert characters from the completion that match characters +after point in the word being completed, so portions of the word +following the cursor are not duplicated. +.TP +.B vi\-cmd\-mode\-string ((cmd)) +If the \fIshow\-mode\-in\-prompt\fP variable is enabled, +this string is displayed immediately before the last line of the primary +prompt when vi editing mode is active and in command mode. +The value is expanded like a +key binding, so the standard set of meta- and control prefixes and +backslash escape sequences is available. +Use the \e1 and \e2 escapes to begin and end sequences of +non-printing characters, which can be used to embed a terminal control +sequence into the mode string. +.TP +.B vi\-ins\-mode\-string ((ins)) +If the \fIshow\-mode\-in\-prompt\fP variable is enabled, +this string is displayed immediately before the last line of the primary +prompt when vi editing mode is active and in insertion mode. +The value is expanded like a +key binding, so the standard set of meta- and control prefixes and +backslash escape sequences is available. +Use the \e1 and \e2 escapes to begin and end sequences of +non-printing characters, which can be used to embed a terminal control +sequence into the mode string. +.TP +.B visible\-stats (Off) +If set to \fBOn\fP, a character denoting a file's type as reported +by \fIstat\fP(2) is appended to the filename when listing possible +completions. +.PD +.SS Conditional Constructs +Readline implements a facility similar in spirit to the conditional +compilation features of the C preprocessor which allows key +bindings and variable settings to be performed as the result +of tests. There are four parser directives used. +.IP \fB$if\fP +The +.B $if +construct allows bindings to be made based on the +editing mode, the terminal being used, or the application using +readline. The text of the test, after any comparison operator, +extends to the end of the line; +unless otherwise noted, no characters are required to isolate it. +.RS +.IP \fBmode\fP +The \fBmode=\fP form of the \fB$if\fP directive is used to test +whether readline is in emacs or vi mode. +This may be used in conjunction +with the \fBset keymap\fP command, for instance, to set bindings in +the \fIemacs-standard\fP and \fIemacs-ctlx\fP keymaps only if +readline is starting out in emacs mode. +.IP \fBterm\fP +The \fBterm=\fP form may be used to include terminal-specific +key bindings, perhaps to bind the key sequences output by the +terminal's function keys. The word on the right side of the +.B = +is tested against the full name of the terminal and the portion +of the terminal name before the first \fB\-\fP. This allows +.I sun +to match both +.I sun +and +.IR sun\-cmd , +for instance. +.IP \fBversion\fP +The \fBversion\fP test may be used to perform comparisons against +specific readline versions. +The \fBversion\fP expands to the current readline version. +The set of comparison operators includes +.BR = , +(and +.BR == ), +.BR != , +.BR <= , +.BR >= , +.BR < , +and +.BR > . +The version number supplied on the right side of the operator consists +of a major version number, an optional decimal point, and an optional +minor version (e.g., \fB7.1\fP). If the minor version is omitted, it +is assumed to be \fB0\fP. +The operator may be separated from the string \fBversion\fP +and from the version number argument by whitespace. +.IP \fBapplication\fP +The \fBapplication\fP construct is used to include +application-specific settings. Each program using the readline +library sets the \fIapplication name\fP, and an initialization +file can test for a particular value. +This could be used to bind key sequences to functions useful for +a specific program. For instance, the following command adds a +key sequence that quotes the current or previous word in \fBbash\fP: +.sp 1 +.RS +.nf +\fB$if\fP Bash +# Quote the current or previous word +"\eC-xq": "\eeb\e"\eef\e"" +\fB$endif\fP +.fi +.RE +.IP \fIvariable\fP +The \fIvariable\fP construct provides simple equality tests for readline +variables and values. +The permitted comparison operators are \fI=\fP, \fI==\fP, and \fI!=\fP. +The variable name must be separated from the comparison operator by +whitespace; the operator may be separated from the value on the right hand +side by whitespace. +Both string and boolean variables may be tested. Boolean variables must be +tested against the values \fIon\fP and \fIoff\fP. +.RE +.IP \fB$endif\fP +This command, as seen in the previous example, terminates an +\fB$if\fP command. +.IP \fB$else\fP +Commands in this branch of the \fB$if\fP directive are executed if +the test fails. +.IP \fB$include\fP +This directive takes a single filename as an argument and reads commands +and bindings from that file. For example, the following directive +would read \fI/etc/inputrc\fP: +.sp 1 +.RS +.nf +\fB$include\fP \^ \fI/etc/inputrc\fP +.fi +.RE +.SH SEARCHING +Readline provides commands for searching through the command history +for lines containing a specified string. +There are two search modes: +.I incremental +and +.IR non-incremental . +.PP +Incremental searches begin before the user has finished typing the +search string. +As each character of the search string is typed, readline displays +the next entry from the history matching the string typed so far. +An incremental search requires only as many characters as needed to +find the desired history entry. +To search backward in the history for a particular string, type +\fBC\-r\fP. Typing \fBC\-s\fP searches forward through the history. +The characters present in the value of the \fBisearch-terminators\fP +variable are used to terminate an incremental search. +If that variable has not been assigned a value the \fIEscape\fP and +\fBC\-J\fP characters will terminate an incremental search. +\fBC\-G\fP will abort an incremental search and restore the original +line. +When the search is terminated, the history entry containing the +search string becomes the current line. +.PP +To find other matching entries in the history list, type \fBC\-s\fP or +\fBC\-r\fP as appropriate. +This will search backward or forward in the history for the next +line matching the search string typed so far. +Any other key sequence bound to a readline command will terminate +the search and execute that command. +For instance, a newline will terminate the search and accept +the line, thereby executing the command from the history list. +A movement command will terminate the search, make the last line found +the current line, and begin editing. +.PP +Non-incremental searches read the entire search string before starting +to search for matching history lines. The search string may be +typed by the user or be part of the contents of the current line. +.SH EDITING COMMANDS +The following is a list of the names of the commands and the default +key sequences to which they are bound. +Command names without an accompanying key sequence are unbound by default. +.PP +In the following descriptions, \fIpoint\fP refers to the current cursor +position, and \fImark\fP refers to a cursor position saved by the +\fBset\-mark\fP command. +The text between the point and mark is referred to as the \fIregion\fP. +.SS Commands for Moving +.PD 0 +.TP +.B beginning\-of\-line (C\-a) +Move to the start of the current line. +.TP +.B end\-of\-line (C\-e) +Move to the end of the line. +.TP +.B forward\-char (C\-f) +Move forward a character. +.TP +.B backward\-char (C\-b) +Move back a character. +.TP +.B forward\-word (M\-f) +Move forward to the end of the next word. Words are composed of +alphanumeric characters (letters and digits). +.TP +.B backward\-word (M\-b) +Move back to the start of the current or previous word. Words are +composed of alphanumeric characters (letters and digits). +.TP +.B previous\-screen\-line +Attempt to move point to the same physical screen column on the previous +physical screen line. This will not have the desired effect if the current +readline line does not take up more than one physical line or if point is not +greater than the length of the prompt plus the screen width. +.TP +.B next\-screen\-line +Attempt to move point to the same physical screen column on the next +physical screen line. This will not have the desired effect if the current +readline line does not take up more than one physical line or if the length +of the current readline line is not greater than the length of the prompt +plus the screen width. +.TP +.B clear\-display (M\-C\-l) +Clear the screen and, if possible, the terminal's scrollback buffer, +then redraw the current line, +leaving the current line at the top of the screen. +.TP +.B clear\-screen (C\-l) +Clear the screen, +then redraw the current line, +leaving the current line at the top of the screen. +With an argument, refresh the current line without clearing the +screen. +.TP +.B redraw\-current\-line +Refresh the current line. +.PD +.SS Commands for Manipulating the History +.PD 0 +.TP +.B accept\-line (Newline, Return) +Accept the line regardless of where the cursor is. +If this line is +non-empty, it may be added to the history list for future recall with +\fBadd_history()\fP. +If the line is a modified history line, the history line is restored to its original state. +.TP +.B previous\-history (C\-p) +Fetch the previous command from the history list, moving back in +the list. +.TP +.B next\-history (C\-n) +Fetch the next command from the history list, moving forward in the +list. +.TP +.B beginning\-of\-history (M\-<) +Move to the first line in the history. +.TP +.B end\-of\-history (M\->) +Move to the end of the input history, i.e., the line currently being +entered. +.TP +.B +operate\-and\-get\-next (C\-o) +Accept the current line for return to the calling application as if a +newline had been entered, +and fetch the next line relative to the current line from the history +for editing. +A numeric argument, if supplied, specifies the history entry to use instead +of the current line. +.TP +.B +fetch\-history +With a numeric argument, fetch that entry from the history list +and make it the current line. +Without an argument, move back to the first entry in the history list. +.TP +.B reverse\-search\-history (C\-r) +Search backward starting at the current line and moving `up' through +the history as necessary. This is an incremental search. +.TP +.B forward\-search\-history (C\-s) +Search forward starting at the current line and moving `down' through +the history as necessary. This is an incremental search. +.TP +.B non\-incremental\-reverse\-search\-history (M\-p) +Search backward through the history starting at the current line +using a non-incremental search for a string supplied by the user. +.TP +.B non\-incremental\-forward\-search\-history (M\-n) +Search forward through the history using a non-incremental search +for a string supplied by the user. +.TP +.B history\-search\-backward +Search backward through the history for the string of characters +between the start of the current line and the current cursor +position (the \fIpoint\fP). +The search string must match at the beginning of a history line. +This is a non-incremental search. +.TP +.B history\-search\-forward +Search forward through the history for the string of characters +between the start of the current line and the point. +The search string must match at the beginning of a history line. +This is a non-incremental search. +.TP +.B history\-substring\-search\-backward +Search backward through the history for the string of characters +between the start of the current line and the current cursor +position (the \fIpoint\fP). +The search string may match anywhere in a history line. +This is a non-incremental search. +.TP +.B history\-substring\-search\-forward +Search forward through the history for the string of characters +between the start of the current line and the point. +The search string may match anywhere in a history line. +This is a non-incremental search. +.TP +.B yank\-nth\-arg (M\-C\-y) +Insert the first argument to the previous command (usually +the second word on the previous line) at point. +With an argument +.IR n , +insert the \fIn\fPth word from the previous command (the words +in the previous command begin with word 0). A negative argument +inserts the \fIn\fPth word from the end of the previous command. +Once the argument \fIn\fP is computed, the argument is extracted +as if the "!\fIn\fP" history expansion had been specified. +.TP +.B +yank\-last\-arg (M\-.\^, M\-_\^) +Insert the last argument to the previous command (the last word of +the previous history entry). +With a numeric argument, behave exactly like \fByank\-nth\-arg\fP. +Successive calls to \fByank\-last\-arg\fP move back through the history +list, inserting the last word (or the word specified by the argument to +the first call) of each line in turn. +Any numeric argument supplied to these successive calls determines +the direction to move through the history. A negative argument switches +the direction through the history (back or forward). +The history expansion facilities are used to extract the last argument, +as if the "!$" history expansion had been specified. +.PD +.SS Commands for Changing Text +.PD 0 +.TP +.B \fIend\-of\-file\fP (usually C\-d) +The character indicating end-of-file as set, for example, by +.if t \f(CWstty\fP. +.if n ``stty''. +If this character is read when there are no characters +on the line, and point is at the beginning of the line, readline +interprets it as the end of input and returns +.SM +.BR EOF . +.TP +.B delete\-char (C\-d) +Delete the character at point. +If this function is bound to the +same character as the tty \fBEOF\fP character, as \fBC\-d\fP +commonly is, see above for the effects. +.TP +.B backward\-delete\-char (Rubout) +Delete the character behind the cursor. When given a numeric argument, +save the deleted text on the kill ring. +.TP +.B forward\-backward\-delete\-char +Delete the character under the cursor, unless the cursor is at the +end of the line, in which case the character behind the cursor is +deleted. +.TP +.B quoted\-insert (C\-q, C\-v) +Add the next character that you type to the line verbatim. This is +how to insert characters like \fBC\-q\fP, for example. +.TP +.B tab\-insert (M-TAB) +Insert a tab character. +.TP +.B self\-insert (a,\ b,\ A,\ 1,\ !,\ ...) +Insert the character typed. +.TP +.B transpose\-chars (C\-t) +Drag the character before point forward over the character at point, +moving point forward as well. +If point is at the end of the line, then this transposes +the two characters before point. +Negative arguments have no effect. +.TP +.B transpose\-words (M\-t) +Drag the word before point past the word after point, +moving point over that word as well. +If point is at the end of the line, this transposes +the last two words on the line. +.TP +.B upcase\-word (M\-u) +Uppercase the current (or following) word. With a negative argument, +uppercase the previous word, but do not move point. +.TP +.B downcase\-word (M\-l) +Lowercase the current (or following) word. With a negative argument, +lowercase the previous word, but do not move point. +.TP +.B capitalize\-word (M\-c) +Capitalize the current (or following) word. With a negative argument, +capitalize the previous word, but do not move point. +.TP +.B overwrite\-mode +Toggle overwrite mode. With an explicit positive numeric argument, +switches to overwrite mode. With an explicit non-positive numeric +argument, switches to insert mode. This command affects only +\fBemacs\fP mode; \fBvi\fP mode does overwrite differently. +Each call to \fIreadline()\fP starts in insert mode. +In overwrite mode, characters bound to \fBself\-insert\fP replace +the text at point rather than pushing the text to the right. +Characters bound to \fBbackward\-delete\-char\fP replace the character +before point with a space. By default, this command is unbound. +.PD +.SS Killing and Yanking +.PD 0 +.TP +.B kill\-line (C\-k) +Kill the text from point to the end of the line. +.TP +.B backward\-kill\-line (C\-x Rubout) +Kill backward to the beginning of the line. +.TP +.B unix\-line\-discard (C\-u) +Kill backward from point to the beginning of the line. +The killed text is saved on the kill-ring. +.\" There is no real difference between this and backward-kill-line +.TP +.B kill\-whole\-line +Kill all characters on the current line, no matter where point is. +.TP +.B kill\-word (M\-d) +Kill from point the end of the current word, or if between +words, to the end of the next word. Word boundaries are the same as +those used by \fBforward\-word\fP. +.TP +.B backward\-kill\-word (M\-Rubout) +Kill the word behind point. +Word boundaries are the same as those used by \fBbackward\-word\fP. +.TP +.B unix\-word\-rubout (C\-w) +Kill the word behind point, using white space as a word boundary. +The killed text is saved on the kill-ring. +.TP +.B unix\-filename\-rubout +Kill the word behind point, using white space and the slash character +as the word boundaries. +The killed text is saved on the kill-ring. +.TP +.B delete\-horizontal\-space (M\-\e) +Delete all spaces and tabs around point. +.TP +.B kill\-region +Kill the text between the point and \fImark\fP (saved cursor position). +This text is referred to as the \fIregion\fP. +.TP +.B copy\-region\-as\-kill +Copy the text in the region to the kill buffer. +.TP +.B copy\-backward\-word +Copy the word before point to the kill buffer. +The word boundaries are the same as \fBbackward\-word\fP. +.TP +.B copy\-forward\-word +Copy the word following point to the kill buffer. +The word boundaries are the same as \fBforward\-word\fP. +.TP +.B yank (C\-y) +Yank the top of the kill ring into the buffer at point. +.TP +.B yank\-pop (M\-y) +Rotate the kill ring, and yank the new top. Only works following +.B yank +or +.BR yank\-pop . +.PD +.SS Numeric Arguments +.PD 0 +.TP +.B digit\-argument (M\-0, M\-1, ..., M\-\-) +Add this digit to the argument already accumulating, or start a new +argument. M\-\- starts a negative argument. +.TP +.B universal\-argument +This is another way to specify an argument. +If this command is followed by one or more digits, optionally with a +leading minus sign, those digits define the argument. +If the command is followed by digits, executing +.B universal\-argument +again ends the numeric argument, but is otherwise ignored. +As a special case, if this command is immediately followed by a +character that is neither a digit or minus sign, the argument count +for the next command is multiplied by four. +The argument count is initially one, so executing this function the +first time makes the argument count four, a second time makes the +argument count sixteen, and so on. +.PD +.SS Completing +.PD 0 +.TP +.B complete (TAB) +Attempt to perform completion on the text before point. +The actual completion performed is application-specific. +.BR Bash , +for instance, attempts completion treating the text as a variable +(if the text begins with \fB$\fP), username (if the text begins with +\fB~\fP), hostname (if the text begins with \fB@\fP), or +command (including aliases and functions) in turn. If none +of these produces a match, filename completion is attempted. +.BR Gdb , +on the other hand, +allows completion of program functions and variables, and +only attempts filename completion under certain circumstances. +.TP +.B possible\-completions (M\-?) +List the possible completions of the text before point. +When displaying completions, readline sets the number of columns used +for display to the value of \fBcompletion-display-width\fP, the value of +the environment variable +.SM +.BR COLUMNS , +or the screen width, in that order. +.TP +.B insert\-completions (M\-*) +Insert all completions of the text before point +that would have been generated by +\fBpossible\-completions\fP. +.TP +.B menu\-complete +Similar to \fBcomplete\fP, but replaces the word to be completed +with a single match from the list of possible completions. +Repeated execution of \fBmenu\-complete\fP steps through the list +of possible completions, inserting each match in turn. +At the end of the list of completions, the bell is rung +(subject to the setting of \fBbell\-style\fP) +and the original text is restored. +An argument of \fIn\fP moves \fIn\fP positions forward in the list +of matches; a negative argument may be used to move backward +through the list. +This command is intended to be bound to \fBTAB\fP, but is unbound +by default. +.TP +.B menu\-complete\-backward +Identical to \fBmenu\-complete\fP, but moves backward through the list +of possible completions, as if \fBmenu\-complete\fP had been given a +negative argument. This command is unbound by default. +.TP +.B delete\-char\-or\-list +Deletes the character under the cursor if not at the beginning or +end of the line (like \fBdelete-char\fP). +If at the end of the line, behaves identically to +\fBpossible-completions\fP. +.PD +.SS Keyboard Macros +.PD 0 +.TP +.B start\-kbd\-macro (C\-x (\^) +Begin saving the characters typed into the current keyboard macro. +.TP +.B end\-kbd\-macro (C\-x )\^) +Stop saving the characters typed into the current keyboard macro +and store the definition. +.TP +.B call\-last\-kbd\-macro (C\-x e) +Re-execute the last keyboard macro defined, by making the characters +in the macro appear as if typed at the keyboard. +.TP +.B print\-last\-kbd\-macro () +Print the last keyboard macro defined in a format suitable for the +\fIinputrc\fP file. +.PD +.SS Miscellaneous +.PD 0 +.TP +.B re\-read\-init\-file (C\-x C\-r) +Read in the contents of the \fIinputrc\fP file, and incorporate +any bindings or variable assignments found there. +.TP +.B abort (C\-g) +Abort the current editing command and +ring the terminal's bell (subject to the setting of +.BR bell\-style ). +.TP +.B do\-lowercase\-version (M\-A, M\-B, M\-\fIx\fP, ...) +If the metafied character \fIx\fP is uppercase, run the command +that is bound to the corresponding metafied lowercase character. +The behavior is undefined if \fIx\fP is already lowercase. +.TP +.B prefix\-meta (ESC) +Metafy the next character typed. +.SM +.B ESC +.B f +is equivalent to +.BR Meta\-f . +.TP +.B undo (C\-_, C\-x C\-u) +Incremental undo, separately remembered for each line. +.TP +.B revert\-line (M\-r) +Undo all changes made to this line. This is like executing the +.B undo +command enough times to return the line to its initial state. +.TP +.B tilde\-expand (M\-&) +Perform tilde expansion on the current word. +.TP +.B set\-mark (C\-@, M\-) +Set the mark to the point. If a +numeric argument is supplied, the mark is set to that position. +.TP +.B exchange\-point\-and\-mark (C\-x C\-x) +Swap the point with the mark. The current cursor position is set to +the saved position, and the old cursor position is saved as the mark. +.TP +.B character\-search (C\-]) +A character is read and point is moved to the next occurrence of that +character. A negative argument searches for previous occurrences. +.TP +.B character\-search\-backward (M\-C\-]) +A character is read and point is moved to the previous occurrence of that +character. A negative argument searches for subsequent occurrences. +.TP +.B skip\-csi\-sequence +Read enough characters to consume a multi-key sequence such as those +defined for keys like Home and End. Such sequences begin with a +Control Sequence Indicator (CSI), usually ESC\-[. If this sequence is +bound to "\e[", keys producing such sequences will have no effect +unless explicitly bound to a readline command, instead of inserting +stray characters into the editing buffer. This is unbound by default, +but usually bound to ESC\-[. +.TP +.B insert\-comment (M\-#) +Without a numeric argument, the value of the readline +.B comment\-begin +variable is inserted at the beginning of the current line. +If a numeric argument is supplied, this command acts as a toggle: if +the characters at the beginning of the line do not match the value +of \fBcomment\-begin\fP, the value is inserted, otherwise +the characters in \fBcomment-begin\fP are deleted from the beginning of +the line. +In either case, the line is accepted as if a newline had been typed. +The default value of +.B comment\-begin +makes the current line a shell comment. +If a numeric argument causes the comment character to be removed, the line +will be executed by the shell. +.TP +.B dump\-functions +Print all of the functions and their key bindings to the +readline output stream. If a numeric argument is supplied, +the output is formatted in such a way that it can be made part +of an \fIinputrc\fP file. +.TP +.B dump\-variables +Print all of the settable variables and their values to the +readline output stream. If a numeric argument is supplied, +the output is formatted in such a way that it can be made part +of an \fIinputrc\fP file. +.TP +.B dump\-macros +Print all of the readline key sequences bound to macros and the +strings they output. If a numeric argument is supplied, +the output is formatted in such a way that it can be made part +of an \fIinputrc\fP file. +.TP +.B emacs\-editing\-mode (C\-e) +When in +.B vi +command mode, this causes a switch to +.B emacs +editing mode. +.TP +.B vi\-editing\-mode (M\-C\-j) +When in +.B emacs +editing mode, this causes a switch to +.B vi +editing mode. +.PD +.SH DEFAULT KEY BINDINGS +.LP +The following is a list of the default emacs and vi bindings. +Characters with the eighth bit set are written as M\-, and +are referred to as +.I metafied +characters. +The printable ASCII characters not mentioned in the list of emacs +standard bindings are bound to the +.B self\-insert +function, which just inserts the given character into the input line. +In vi insertion mode, all characters not specifically mentioned are +bound to +.BR self\-insert . +Characters assigned to signal generation by +.IR stty (1) +or the terminal driver, such as C-Z or C-C, +retain that function. +Upper and lower case metafied characters are bound to the same function in +the emacs mode meta keymap. +The remaining characters are unbound, which causes readline +to ring the bell (subject to the setting of the +.B bell\-style +variable). +.SS Emacs Mode +.RS +.6i +.nf +.ta 2.5i +.sp +Emacs Standard bindings +.sp +"C-@" set-mark +"C-A" beginning-of-line +"C-B" backward-char +"C-D" delete-char +"C-E" end-of-line +"C-F" forward-char +"C-G" abort +"C-H" backward-delete-char +"C-I" complete +"C-J" accept-line +"C-K" kill-line +"C-L" clear-screen +"C-M" accept-line +"C-N" next-history +"C-P" previous-history +"C-Q" quoted-insert +"C-R" reverse-search-history +"C-S" forward-search-history +"C-T" transpose-chars +"C-U" unix-line-discard +"C-V" quoted-insert +"C-W" unix-word-rubout +"C-Y" yank +"C-]" character-search +"C-_" undo +"\^ " to "/" self-insert +"0" to "9" self-insert +":" to "~" self-insert +"C-?" backward-delete-char +.PP +Emacs Meta bindings +.sp +"M-C-G" abort +"M-C-H" backward-kill-word +"M-C-I" tab-insert +"M-C-J" vi-editing-mode +"M-C-L" clear-display +"M-C-M" vi-editing-mode +"M-C-R" revert-line +"M-C-Y" yank-nth-arg +"M-C-[" complete +"M-C-]" character-search-backward +"M-space" set-mark +"M-#" insert-comment +"M-&" tilde-expand +"M-*" insert-completions +"M--" digit-argument +"M-." yank-last-arg +"M-0" digit-argument +"M-1" digit-argument +"M-2" digit-argument +"M-3" digit-argument +"M-4" digit-argument +"M-5" digit-argument +"M-6" digit-argument +"M-7" digit-argument +"M-8" digit-argument +"M-9" digit-argument +"M-<" beginning-of-history +"M-=" possible-completions +"M->" end-of-history +"M-?" possible-completions +"M-B" backward-word +"M-C" capitalize-word +"M-D" kill-word +"M-F" forward-word +"M-L" downcase-word +"M-N" non-incremental-forward-search-history +"M-P" non-incremental-reverse-search-history +"M-R" revert-line +"M-T" transpose-words +"M-U" upcase-word +"M-Y" yank-pop +"M-\e" delete-horizontal-space +"M-~" tilde-expand +"M-C-?" backward-kill-word +"M-_" yank-last-arg +.PP +Emacs Control-X bindings +.sp +"C-XC-G" abort +"C-XC-R" re-read-init-file +"C-XC-U" undo +"C-XC-X" exchange-point-and-mark +"C-X(" start-kbd-macro +"C-X)" end-kbd-macro +"C-XE" call-last-kbd-macro +"C-XC-?" backward-kill-line +.sp +.RE +.SS VI Mode bindings +.RS +.6i +.nf +.ta 2.5i +.sp +.PP +VI Insert Mode functions +.sp +"C-D" vi-eof-maybe +"C-H" backward-delete-char +"C-I" complete +"C-J" accept-line +"C-M" accept-line +"C-R" reverse-search-history +"C-S" forward-search-history +"C-T" transpose-chars +"C-U" unix-line-discard +"C-V" quoted-insert +"C-W" unix-word-rubout +"C-Y" yank +"C-[" vi-movement-mode +"C-_" undo +"\^ " to "~" self-insert +"C-?" backward-delete-char +.PP +VI Command Mode functions +.sp +"C-D" vi-eof-maybe +"C-E" emacs-editing-mode +"C-G" abort +"C-H" backward-char +"C-J" accept-line +"C-K" kill-line +"C-L" clear-screen +"C-M" accept-line +"C-N" next-history +"C-P" previous-history +"C-Q" quoted-insert +"C-R" reverse-search-history +"C-S" forward-search-history +"C-T" transpose-chars +"C-U" unix-line-discard +"C-V" quoted-insert +"C-W" unix-word-rubout +"C-Y" yank +"C-_" vi-undo +"\^ " forward-char +"#" insert-comment +"$" end-of-line +"%" vi-match +"&" vi-tilde-expand +"*" vi-complete +"+" next-history +"," vi-char-search +"-" previous-history +"." vi-redo +"/" vi-search +"0" beginning-of-line +"1" to "9" vi-arg-digit +";" vi-char-search +"=" vi-complete +"?" vi-search +"A" vi-append-eol +"B" vi-prev-word +"C" vi-change-to +"D" vi-delete-to +"E" vi-end-word +"F" vi-char-search +"G" vi-fetch-history +"I" vi-insert-beg +"N" vi-search-again +"P" vi-put +"R" vi-replace +"S" vi-subst +"T" vi-char-search +"U" revert-line +"W" vi-next-word +"X" backward-delete-char +"Y" vi-yank-to +"\e" vi-complete +"^" vi-first-print +"_" vi-yank-arg +"`" vi-goto-mark +"a" vi-append-mode +"b" vi-prev-word +"c" vi-change-to +"d" vi-delete-to +"e" vi-end-word +"f" vi-char-search +"h" backward-char +"i" vi-insertion-mode +"j" next-history +"k" prev-history +"l" forward-char +"m" vi-set-mark +"n" vi-search-again +"p" vi-put +"r" vi-change-char +"s" vi-subst +"t" vi-char-search +"u" vi-undo +"w" vi-next-word +"x" vi-delete +"y" vi-yank-to +"|" vi-column +"~" vi-change-case +.RE +.SH "SEE ALSO" +.PD 0 +.TP +\fIThe Gnu Readline Library\fP, Brian Fox and Chet Ramey +.TP +\fIThe Gnu History Library\fP, Brian Fox and Chet Ramey +.TP +\fIbash\fP(1) +.PD +.SH FILES +.PD 0 +.TP +.FN ~/.inputrc +Individual \fBreadline\fP initialization file +.PD +.SH AUTHORS +Brian Fox, Free Software Foundation +.br +bfox@gnu.org +.PP +Chet Ramey, Case Western Reserve University +.br +chet.ramey@case.edu +.SH BUG REPORTS +If you find a bug in +.B readline, +you should report it. But first, you should +make sure that it really is a bug, and that it appears in the latest +version of the +.B readline +library that you have. +.PP +Once you have determined that a bug actually exists, mail a +bug report to \fIbug\-readline\fP@\fIgnu.org\fP. +If you have a fix, you are welcome to mail that +as well! Suggestions and `philosophical' bug reports may be mailed +to \fPbug-readline\fP@\fIgnu.org\fP or posted to the Usenet +newsgroup +.BR gnu.bash.bug . +.PP +Comments and bug reports concerning +this manual page should be directed to +.IR chet.ramey@case.edu . +.SH BUGS +It's too big and too slow. -- cgit v1.2.3