From ae581a19fbe896a797450b9d9573fb66f2735227 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 16:37:38 +0200 Subject: Adding upstream version 1.9.13p3. Signed-off-by: Daniel Baumann --- docs/sudo_logsrv.proto.mdoc.in | 828 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 828 insertions(+) create mode 100644 docs/sudo_logsrv.proto.mdoc.in (limited to 'docs/sudo_logsrv.proto.mdoc.in') diff --git a/docs/sudo_logsrv.proto.mdoc.in b/docs/sudo_logsrv.proto.mdoc.in new file mode 100644 index 0000000..daa4a55 --- /dev/null +++ b/docs/sudo_logsrv.proto.mdoc.in @@ -0,0 +1,828 @@ +.\" +.\" SPDX-License-Identifier: ISC +.\" +.\" Copyright (c) 2019-2022 Todd C. Miller +.\" +.\" Permission to use, copy, modify, and distribute this software for any +.\" purpose with or without fee is hereby granted, provided that the above +.\" copyright notice and this permission notice appear in all copies. +.\" +.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES +.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR +.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN +.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF +.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +.\" +.Dd September 13, 2022 +.Dt SUDO_LOGSRV.PROTO @mansectform@ +.Os Sudo @PACKAGE_VERSION@ +.Sh NAME +.Nm sudo_logsrv.proto +.Nd Sudo log server protocol +.Sh DESCRIPTION +Starting with version 1.9.0, +.Nm sudo +supports sending event and I/O logs to a log server. +The protocol used is written in Google's Protocol Buffers domain +specific language. +The +.Sx EXAMPLES +section includes a complete description of the protocol in Protocol +Buffers format. +.Pp +Because there is no way to determine message boundaries when using +Protocol Buffers, the wire size of each message is sent immediately +preceding the message itself as a 32-bit unsigned integer in network +byte order. +This is referred to as +.Dq length-prefix framing +and is how Google suggests handling the lack of message delimiters. +.Pp +The protocol is made up of two basic messages, +.Em ClientMessage +and +.Em ServerMessage , +described below. +The server must accept messages up to two megabytes in size. +The server may return an error if the client tries to send a message +larger than two megabytes. +.Sh Client Messages +A +.Em ClientMessage +is a container used to encapsulate all the possible message types +a client may send to the server. +.Bd -literal +message ClientMessage { + oneof type { + AcceptMessage accept_msg = 1; + RejectMessage reject_msg = 2; + ExitMessage exit_msg = 3; + RestartMessage restart_msg = 4; + AlertMessage alert_msg = 5; + IoBuffer ttyin_buf = 6; + IoBuffer ttyout_buf = 7; + IoBuffer stdin_buf = 8; + IoBuffer stdout_buf = 9; + IoBuffer stderr_buf = 10; + ChangeWindowSize winsize_event = 11; + CommandSuspend suspend_event = 12; + ClientHello hello_msg = 13; + } +} +.Ed +.Pp +The different +.Em ClientMessage +sub-messages the client may sent to the server are described below. +.Ss TimeSpec +.Bd -literal +message TimeSpec { + int64 tv_sec = 1; + int32 tv_nsec = 2; +} +.Ed +.Pp +A +.Em TimeSpec +is the equivalent of a POSIX +.Vt struct timespec , +containing seconds and nanoseconds members. +The +.Em tv_sec +member is a 64-bit integer to support dates after the year 2038. +.Ss InfoMessage +.Bd -literal +message InfoMessage { + message StringList { + repeated string strings = 1; + } + message NumberList { + repeated int64 numbers = 1; + } + string key = 1; + oneof value { + int64 numval = 2; + string strval = 3; + StringList strlistval = 4; + NumberList numlistval = 5; + } +} +.Ed +.Pp +An +.Em InfoMessage +is used to represent information about the invoking user as well as the +execution environment the command runs in the form of key-value pairs. +The key is always a string but the value may be a 64-bit integer, +a string, an array of strings, or an array of 64-bit integers. +The event log data is composed of +.Em InfoMessage +entries. +See the +.Sx EVENT LOG VARIABLES +section for more information. +.Ss ClientHello hello_msg +.Bd -literal +message ClientHello { + string client_id = 1; +} +.Ed +.Pp +A +.Em ClientHello +message consists of client information that may be sent to the +server when the client first connects. +.Bl -tag -width Ds +.It client_id +A free-form client description. +This usually includes the name and version of the client implementation. +.El +.Ss AcceptMessage accept_msg +.Bd -literal +message AcceptMessage { + TimeSpec submit_time = 1; + repeated InfoMessage info_msgs = 2; + bool expect_iobufs = 3; +} +.Ed +.Pp +An +.Em AcceptMessage +is sent by the client when a command is allowed by the security policy. +It contains the following members: +.Bl -tag -width Ds +.It submit_time +The wall clock time when the command was submitted to the security policy. +.It info_msgs +An array of +.Em InfoMessage +describing the user who submitted the command as well as the execution +environment of the command. +This information is used to generate an event log entry and may also be +used by server to determine where and how the I/O log is stored. +.It expect_iobufs +Set to true if the server should expect +.Em IoBuffer +messages to follow (for I/O logging) or false if the server should only +store the event log. +.El +.Pp +If an +.Em AcceptMessage +is sent, the client must not send a +.Em RejectMessage +or +.Em RestartMessage . +.Ss RejectMessage reject_msg +.Bd -literal +message RejectMessage { + TimeSpec submit_time = 1; + string reason = 2; + repeated InfoMessage info_msgs = 3; +} +.Ed +.Pp +A +.Em RejectMessage +is sent by the client when a command is denied by the security policy. +It contains the following members: +.Bl -tag -width Ds +.It submit_time +The wall clock time when the command was submitted to the security policy. +.It reason +The reason the security policy gave for denying the command. +.It info_msgs +An array of +.Em InfoMessage +describing the user who submitted the command as well as the execution +environment of the command. +This information is used to generate an event log entry. +.El +.Pp +If a +.Em RejectMessage +is sent, the client must not send an +.Em AcceptMessage +or +.Em RestartMessage . +.Ss ExitMessage exit_msg +.Bd -literal +message ExitMessage { + TimeSpec run_time = 1; + int32 exit_value = 2; + bool dumped_core = 3; + string signal = 4; + string error = 5; +} +.Pp +.Ed +An +.Em ExitMessage +is sent by the client after the command has exited or has been +terminated by a signal. +It contains the following members: +.Bl -tag -width Ds +.It run_time +The total amount of elapsed time since the command started, +calculated using a monotonic clock where possible. +This is not the wall clock time. +.It exit_value +The command's exit value in the range 0-255. +.It dumped_core +True if the command was terminated by a signal and dumped core. +.It signal +If the command was terminated by a signal, this is set to the +name of the signal without the leading +.Dq SIG . +For example, +.Dv INT , +.Dv TERM , +.Dv KILL , +.Dv SEGV . +.It error +A message from the client indicating that the command was terminated +unexpectedly due to an error. +.El +.Pp +When performing I/O logging, the client should wait for a +.Em commit_point +corresponding to the final +.Em IoBuffer +before closing the connection unless the final +.Em commit_point +has already been received. +.Ss RestartMessage restart_msg +.Bd -literal +message RestartMessage { + string log_id = 1; + TimeSpec resume_point = 2; +} +.Ed +.Pp +A +.Em RestartMessage +is sent by the client to resume sending an existing I/O log that +was previously interrupted. +It contains the following members: +.Bl -tag -width Ds +.It log_id +The the server-side name for an I/O log that was previously +sent to the client by the server. +This may be a path name on the server or some other kind of server-side +identifier. +.It resume_point +The point in time after which to resume the I/O log. +This is in the form of a +.Em TimeSpec +representing the amount of time since the command started, not +the wall clock time. +The +.Em resume_point +should correspond to a +.Em commit_point +previously sent to the client by the server. +If the server receives a +.Em RestartMessage +containing a +.Em resume_point +it has not previously seen, an error will be returned to the client +and the connection will be dropped. +.El +.Pp +If a +.Em RestartMessage +is sent, the client must not send an +.Em AcceptMessage +or +.Em RejectMessage . +.Ss AlertMessage alert_msg +.Bd -literal +message AlertMessage { + TimeSpec alert_time = 1; + string reason = 2; + repeated InfoMessage info_msgs = 3; +} +.Ed +.Pp +An +.Em AlertMessage +is sent by the client to indicate a problem detected by the security +policy while the command is running that should be stored in the event log. +It contains the following members: +.Bl -tag -width Ds +.It alert_time +The wall clock time when the alert occurred. +.It reason +The reason for the alert. +.It info_msgs +An optional array of +.Em InfoMessage +describing the user who submitted the command as well as the execution +environment of the command. +This information is used to generate an event log entry. +.El +.Ss IoBuffer ttyin_buf | ttyout_buf | stdin_buf | stdout_buf | stderr_buf +.Bd -literal +message IoBuffer { + TimeSpec delay = 1; + bytes data = 2; +} +.Ed +.Pp +An +.Em IoBuffer +is used to represent data from terminal input, terminal +output, standard input, standard output, or standard error. +It contains the following members: +.Bl -tag -width Ds +.It delay +The elapsed time since the last record in the form of a +.Em TimeSpec . +The +.Em delay +should be calculated using a monotonic clock where possible. +.It data +The binary I/O log data from terminal input, terminal output, +standard input, standard output, or standard error. +.El +.Ss ChangeWindowSize winsize_event +.Bd -literal +message ChangeWindowSize { + TimeSpec delay = 1; + int32 rows = 2; + int32 cols = 3; +} +.Ed +.Pp +A +.Em ChangeWindowSize +message is sent by the client when the terminal running the command +changes size. +It contains the following members: +.Bl -tag -width Ds +.It delay +The elapsed time since the last record in the form of a +.Em TimeSpec . +The +.Em delay +should be calculated using a monotonic clock where possible. +.It rows +The new number of terminal rows. +.It cols +The new number of terminal columns. +.El +.Ss CommandSuspend suspend_event +.Bd -literal +message CommandSuspend { + TimeSpec delay = 1; + string signal = 2; +} +.Ed +.Pp +A +.Em CommandSuspend +message is sent by the client when the command is either suspended +or resumed. +It contains the following members: +.Bl -tag -width Ds +.It delay +The elapsed time since the last record in the form of a +.Em TimeSpec . +The +.Em delay +should be calculated using a monotonic clock where possible. +.It signal +The signal name without the leading +.Dq SIG . +For example, +.Dv STOP , +.Dv TSTP , +.Dv CONT . +.El +.Sh Server Messages +A +.Em ServerMessage +is a container used to encapsulate all the possible message types +the server may send to a client. +.Bd -literal +message ServerMessage { + oneof type { + ServerHello hello = 1; + TimeSpec commit_point = 2; + string log_id = 3; + string error = 4; + string abort = 5; + } +} +.Ed +.Pp +The different +.Em ServerMessage +sub-messages the server may sent to the client are described below. +.Ss ServerHello hello +.Bd -literal +message ServerHello { + string server_id = 1; + string redirect = 2; + repeated string servers = 3; + bool subcommands = 4; +} +.Ed +.Pp +The +.Em ServerHello +message consists of server information sent when the client first connects. +It contains the following members: +.Bl -tag -width Ds +.It server_id +A free-form server description. +Usually this includes the name and version of the implementation +running on the log server. +This member is always present. +.It redirect +A host and port separated by a colon +.Pq Ql : +that the client should connect to instead. +The host may be a host name, an IPv4 address, or an IPv6 address +in square brackets. +This may be used for server load balancing. +The server will disconnect after sending the +.Em ServerHello +when it includes a +.Sy redirect . +.It servers +A list of other known log servers. +This can be used to implement log server redundancy and allows the +client to discover all other log servers simply by connecting to +one known server. +This member may be omitted when there is only a single log server. +.It subcommands +If set, the server supports logging additional commands during a session. +The client may send an +.Em AcceptMessage +or +.Em RejectMessage +when +.Nm sudo +is running in +.Em intercept +mode. +In this mode, commands spawned from the initial command authorized by +.Nm sudo +are subject to policy restrictions and/or are logged. +If +.Em subcommands +is false, the client must not attempt to log additional commands. +.El +.Ss TimeSpec commit_point +A periodic time stamp sent by the server to indicate when I/O log +buffers have been committed to storage. +This message is not sent after every +.Em IoBuffer +but rather at a server-configurable interval. +When the server receives an +.Em ExitMessage , +it will respond with a +.Em commit_point +corresponding to the last received +.Em IoBuffer +before closing the connection. +.Ss string log_id +The server-side ID of the I/O log being stored, sent in response +to an +.Em AcceptMessage +where +.Em expect_iobufs +is true. +.Ss string error +A fatal server-side error. +The server will close the connection after sending the +.Em error +message. +.Ss string abort +An +.Em abort +message from the server indicates that the client should kill the +command and terminate the session. +It may be used to implement simple server-side policy. +The server will close the connection after sending the +.Em abort +message. +.Sh Protocol flow of control +The expected protocol flow is as follows: +.Bl -enum +.It +Client connects to the first available server. +If the client is configured to use TLS, a TLS handshake will be +attempted. +.It +Client sends +.Em ClientHello . +This is currently optional but allows the server to detect a +non-TLS connection on the TLS port. +.It +Server sends +.Em ServerHello . +.It +Client responds with either +.Em AcceptMessage , +.Em RejectMessage , +or +.Em RestartMessage . +.It +If client sent a +.Em AcceptMessage +with +.Em expect_iobufs +set, server creates a new I/O log and responds with a +.Em log_id . +.It +Client sends zero or more +.Em IoBuffer +messages. +.It +Server periodically responds to +.Em IoBuffer +messages with a +.Em commit_point . +.It +Client sends an +.Em ExitMessage +when the command exits or is killed. +.It +Server sends the final +.Em commit_point +if one is pending. +.It +Server closes the connection. +After receiving the final +.Em commit_point , +the client shuts down its side of the TLS connection if TLS +is in use, and closes the connection. +.It +Server shuts down its side of the TLS connection if TLS is in use, +and closes the connection. +.El +.Pp +At any point, the server may send an +.Em error +or +.Em abort +message to the client at which point the server will close the +connection. +If an +.Em abort +message is received, the client should terminate the running command. +.Sh EVENT LOG VARIABLES +.Em AcceptMessage , +.Em AlertMessage +and +.Em RejectMessage +classes contain an array of +.Em InfoMessage +that should contain information about the user who submitted the command +as well as information about the execution environment of the command +if it was accepted. +.Pp +Some variables have a +.Em client , +.Em run , +or +.Em submit +prefix. +These prefixes are used to eliminate ambiguity for variables that +could apply to the client program, the user submitting the command, +or the command being run. +Variables with a +.Em client +prefix pertain to the program performing the connection to the log +server, for example +.Nm sudo . +Variables with a +.Em run +prefix pertain to the command that the user requested be run. +Variables with a +.Em submit +prefix pertain to the user submitting the request +.Pq the user running Nm sudo . +.Pp +The following +.Em InfoMessage +entries are required: +.Bl -column "submitgroup" "stringlist" "name of host the command was submitted on" +.It Sy Key Ta Sy Type Ta Sy Description +.It command Ta string Ta command that was submitted +.It runuser Ta string Ta name of user the command was run as +.It submithost Ta string Ta name of host the command was submitted on +.It submituser Ta string Ta name of user submitting the command +.El +.Pp +The following +.Em InfoMessage +entries are recognized, but not required: +.Bl -column "submitgroup" "stringlist" "name of host the command was submitted on" +.It Sy Key Ta Sy Type Ta Sy Description +.It clientargv Ta StringList Ta client's original argument vector +.It clientpid Ta int64 Ta client's process ID +.It clientppid Ta int64 Ta client's parent process ID +.It clientsid Ta int64 Ta client's terminal session ID +.It columns Ta int64 Ta number of columns in the terminal +.It lines Ta int64 Ta number of lines in the terminal +.It runargv Ta StringList Ta argument vector of command to run +.It runchroot Ta string Ta root directory of command to run +.It runcwd Ta string Ta running command's working directory +.It runenv Ta StringList Ta the running command's environment +.It rungid Ta int64 Ta primary group-ID of the command +.It rungids Ta NumberList Ta supplementary group-IDs for the command +.It rungroup Ta string Ta primary group name of the command +.It rungroups Ta StringList Ta supplementary group names for the command +.It runuid Ta int64 Ta run user's user-ID +.It submitcwd Ta string Ta submit user's current working directory +.It submitenv Ta StringList Ta the submit user's environment +.It submitgid Ta int64 Ta submit user's primary group-ID +.It submitgids Ta NumberList Ta submit user's supplementary group-IDs +.It submitgroup Ta string Ta submitting user's primary group name +.It submitgroups Ta StringList Ta submit user's supplementary group names +.It submituid Ta int64 Ta submit user's user-ID +.It ttyname Ta string Ta the terminal the command was submitted from +.El +.Pp +The server must accept other variables not listed above but may +ignore them. +.Sh EXAMPLES +The Protocol Buffers description of the log server protocol, using +.Dq proto3 +syntax, is included in full below. +.Bd -literal +syntax = "proto3"; + +/* + * Client message to the server. Messages on the wire are + * prefixed with a 32-bit size in network byte order. + */ +message ClientMessage { + oneof type { + AcceptMessage accept_msg = 1; + RejectMessage reject_msg = 2; + ExitMessage exit_msg = 3; + RestartMessage restart_msg = 4; + AlertMessage alert_msg = 5; + IoBuffer ttyin_buf = 6; + IoBuffer ttyout_buf = 7; + IoBuffer stdin_buf = 8; + IoBuffer stdout_buf = 9; + IoBuffer stderr_buf = 10; + ChangeWindowSize winsize_event = 11; + CommandSuspend suspend_event = 12; + } +} + +/* Equivalent of POSIX struct timespec */ +message TimeSpec { + int64 tv_sec = 1; /* seconds */ + int32 tv_nsec = 2; /* nanoseconds */ +} + +/* I/O buffer with keystroke data */ +message IoBuffer { + TimeSpec delay = 1; /* elapsed time since last record */ + bytes data = 2; /* keystroke data */ +} + +/* + * Key/value pairs, like Privilege Manager struct info. + * The value may be a number, a string, or a list of strings. + */ +message InfoMessage { + message StringList { + repeated string strings = 1; + } + message NumberList { + repeated int64 numbers = 1; + } + string key = 1; + oneof value { + int64 numval = 2; + string strval = 3; + StringList strlistval = 4; + NumberList numlistval = 5; + } +} + +/* + * Event log data for command accepted by the policy. + */ +message AcceptMessage { + TimeSpec submit_time = 1; /* when command was submitted */ + repeated InfoMessage info_msgs = 2; /* key,value event log data */ + bool expect_iobufs = 3; /* true if I/O logging enabled */ +} + +/* + * Event log data for command rejected by the policy. + */ +message RejectMessage { + TimeSpec submit_time = 1; /* when command was submitted */ + string reason = 2; /* reason command was rejected */ + repeated InfoMessage info_msgs = 3; /* key,value event log data */ +} + +/* Message sent by client when command exits. */ +/* Might revisit runtime and use end_time instead */ +message ExitMessage { + TimeSpec run_time = 1; /* total elapsed run time */ + int32 exit_value = 2; /* 0-255 */ + bool dumped_core = 3; /* true if command dumped core */ + string signal = 4; /* signal name if killed by signal */ + string error = 5; /* if killed due to other error */ +} + +/* Alert message, policy module-specific. */ +message AlertMessage { + TimeSpec alert_time = 1; /* time alert message occurred */ + string reason = 2; /* policy alert error string */ + repeated InfoMessage info_msgs = 3; /* key,value event log data */ +} + +/* Used to restart an existing I/O log on the server. */ +message RestartMessage { + string log_id = 1; /* ID of log being restarted */ + TimeSpec resume_point = 2; /* resume point (elapsed time) */ +} + +/* Window size change event. */ +message ChangeWindowSize { + TimeSpec delay = 1; /* elapsed time since last record */ + int32 rows = 2; /* new number of rows */ + int32 cols = 3; /* new number of columns */ +} + +/* Command suspend/resume event. */ +message CommandSuspend { + TimeSpec delay = 1; /* elapsed time since last record */ + string signal = 2; /* signal that caused suspend/resume */ +} + +/* + * Server messages to the client. Messages on the wire are + * prefixed with a 32-bit size in network byte order. + */ +message ServerMessage { + oneof type { + ServerHello hello = 1; /* server hello message */ + TimeSpec commit_point = 2; /* cumulative time of records stored */ + string log_id = 3; /* ID of server-side I/O log */ + string error = 4; /* error message from server */ + string abort = 5; /* abort message, kill command */ + } +} + +/* Hello message from server when client connects. */ +message ServerHello { + string server_id = 1; /* free-form server description */ + string redirect = 2; /* optional redirect if busy */ + repeated string servers = 3; /* optional list of known servers */ +} +.Ed +.Sh SEE ALSO +.Xr sudo_logsrvd.conf @mansectform@ , +.Xr sudoers @mansectform@ , +.Xr sudo @mansectsu@ , +.Xr sudo_logsrvd @mansectsu@ +.Rs +.%T Protocol Buffers +.%U https://developers.google.com/protocol-buffers/ +.Re +.Sh AUTHORS +Many people have worked on +.Nm sudo +over the years; this version consists of code written primarily by: +.Bd -ragged -offset indent +.An Todd C. Miller +.Ed +.Pp +See the CONTRIBUTORS.md file in the +.Nm sudo +distribution (https://www.sudo.ws/about/contributors/) for an +exhaustive list of people who have contributed to +.Nm sudo . +.Sh BUGS +If you believe you have found a bug in +.Nm sudo , +you can submit a bug report at https://bugzilla.sudo.ws/ +.Sh SUPPORT +Limited free support is available via the sudo-users mailing list, +see https://www.sudo.ws/mailman/listinfo/sudo-users to subscribe or +search the archives. +.Sh DISCLAIMER +.Nm sudo +is provided +.Dq AS IS +and any express or implied warranties, including, but not limited +to, the implied warranties of merchantability and fitness for a +particular purpose are disclaimed. +See the LICENSE.md file distributed with +.Nm sudo +or https://www.sudo.ws/about/license/ for complete details. -- cgit v1.2.3