From ae581a19fbe896a797450b9d9573fb66f2735227 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 16:37:38 +0200 Subject: Adding upstream version 1.9.13p3. Signed-off-by: Daniel Baumann --- .../corpus/seed/logsrvd_conf/logsrvd.conf.5 | 255 +++++++++++++++++++++ 1 file changed, 255 insertions(+) create mode 100644 logsrvd/regress/corpus/seed/logsrvd_conf/logsrvd.conf.5 (limited to 'logsrvd/regress/corpus/seed/logsrvd_conf/logsrvd.conf.5') diff --git a/logsrvd/regress/corpus/seed/logsrvd_conf/logsrvd.conf.5 b/logsrvd/regress/corpus/seed/logsrvd_conf/logsrvd.conf.5 new file mode 100644 index 0000000..5a4019f --- /dev/null +++ b/logsrvd/regress/corpus/seed/logsrvd_conf/logsrvd.conf.5 @@ -0,0 +1,255 @@ +# +# sudo logsrv daemon configuration +# + +[server] +# The host name or IP address and port to listen on with an optional TLS +# flag. If no port is specified, port 30343 will be used for plaintext +# connections and port 30344 will be used to TLS connections. +# The following forms are accepted: +# listen_address = hostname(tls) +# listen_address = hostname:port(tls) +# listen_address = IPv4_address(tls) +# listen_address = IPv4_address:port(tls) +# listen_address = [IPv6_address](tls) +# listen_address = [IPv6_address]:port(tls) +# +# The (tls) suffix should be omitted for plaintext connections. +# +# Multiple listen_address settings may be specified. +# The default is to listen on all addresses. +#listen_address = *:30343 +listen_address = *:30344(tls) + +# The file containing the ID of the running sudo_logsrvd process. +pid_file = /var/run/sudo/sudo_logsrvd.pid + +# Where to log server warnings: none, stderr, syslog, or a path name. +server_log = syslog + +# If true, enable the SO_KEEPALIVE socket option on client connections. +# Defaults to true. +tcp_keepalive = true + +# The amount of time, in seconds, the server will wait for the client to +# respond. A value of 0 will disable the timeout. The default value is 30. +timeout = 30 + +# If true, the server will validate its own certificate at startup. +# Defaults to true. +tls_verify = true + +# If true, client certificates will be validated by the server; +# clients without a valid certificate will be unable to connect. +# By default, client certs are not checked. +tls_checkpeer = false + +# Path to a certificate authority bundle file in PEM format to use +# instead of the system's default certificate authority database. +tls_cacert = /etc/ssl/sudo/cacert.pem + +# Path to the server's certificate file in PEM format. +# Required for TLS connections. +tls_cert = /etc/ssl/sudo/certs/logsrvd_cert.pem + +# Path to the server's private key file in PEM format. +# Required for TLS connections. +tls_key = /etc/ssl/sudo/private/logsrvd_key.pem + +# TLS cipher list (see "CIPHER LIST FORMAT" in the openssl-ciphers manual). +# NOTE that this setting is only effective if the negotiated protocol +# is TLS version 1.2. +# The default cipher list is HIGH:!aNULL. +tls_ciphers_v12 = HIGH:!aNULL + +# TLS cipher list if the negotiated protocol is TLS version 1.3. +# The default cipher list is TLS_AES_256_GCM_SHA384. +tls_ciphers_v13 = TLS_AES_256_GCM_SHA384 + +# Path to the Diffie-Hellman parameter file in PEM format. +# If not set, the server will use the OpenSSL defaults. +tls_dhparams = /etc/ssl/sudo/logsrvd_dhparams.pem + +[relay] +# The host name or IP address and port to send logs to in relay mode. +# The syntax is identical to listen_address with the exception of +# the wild card ('*') syntax. When this setting is enabled, logs will +# be relayed to the specified host instead of being stored locally. +# This setting is not enabled by default. +#relay_host = relayhost.dom.ain +#relay_host = relayhost.dom.ain(tls) +relay_host = localhost(tls) + +# The amount of time, in seconds, the server will wait for a connection +# to the relay server to complete. A value of 0 will disable the timeout. +# The default value is 30. +connect_timeout = 30 + +# The directory to store messages in before they are sent to the relay. +# Messages are stored in wire format. +# The default value is /var/log/sudo_logsrvd. +relay_dir = /var/log/sudo_logsrvd + +# The number of seconds to wait after a connection error before +# making a new attempt to forward a message to a relay host. +# The default value is 30. +retry_interval = 30 + +# Whether to store the log before relaying it. If true, enable store +# and forward mode. If false, the client connection is immediately +# relayed. Defaults to false. +#store_first = true + +# If true, enable the SO_KEEPALIVE socket option on relay connections. +# Defaults to true. +tcp_keepalive = true + +# The amount of time, in seconds, the server will wait for the relay to +# respond. A value of 0 will disable the timeout. The default value is 30. +timeout = 30 + +# If true, the server's relay certificate will be verified at startup. +# The default is to use the value in the [server] section. +tls_verify = true + +# Whether to verify the relay's certificate for TLS connections. +# The default is to use the value in the [server] section. +tls_checkpeer = false + +# Path to a certificate authority bundle file in PEM format to use +# instead of the system's default certificate authority database. +# The default is to use the value in the [server] section. +tls_cacert = /etc/ssl/sudo/cacert.pem + +# Path to the server's certificate file in PEM format. +# The default is to use the certificate in the [server] section. +tls_cert = /etc/ssl/sudo/certs/logsrvd_cert.pem + +# Path to the server's private key file in PEM format. +# The default is to use the key in the [server] section. +tls_key = /etc/ssl/sudo/private/logsrvd_key.pem + +# TLS cipher list (see "CIPHER LIST FORMAT" in the openssl-ciphers manual). +# NOTE that this setting is only effective if the negotiated protocol +# is TLS version 1.2. +# The default is to use the value in the [server] section. +tls_ciphers_v12 = HIGH:!aNULL + +# TLS cipher list if the negotiated protocol is TLS version 1.3. +# The default is to use the value in the [server] section. +tls_ciphers_v13 = TLS_AES_256_GCM_SHA384 + +# Path to the Diffie-Hellman parameter file in PEM format. +# The default is to use the value in the [server] section. +tls_dhparams = /etc/ssl/sudo/logsrvd_dhparams.pem + +[iolog] +# The top-level directory to use when constructing the path name for the +# I/O log directory. The session sequence number, if any, is stored here. +iolog_dir = /var/log/sudo-io + +# The path name, relative to iolog_dir, in which to store I/O logs. +# Note that iolog_file may contain directory components. +iolog_file = %{seq} + +# If set, I/O logs will be compressed using zlib. Enabling compression can +# make it harder to view the logs in real-time as the program is executing. +iolog_compress = false + +# If set, I/O log data is flushed to disk after each write instead of +# buffering it. This makes it possible to view the logs in real-time +# as the program is executing but reduces the effectiveness of compression. +iolog_flush = true + +# The group to use when creating new I/O log files and directories. +# If iolog_group is not set, the primary group-ID of the user specified +# by iolog_user is used. If neither iolog_group nor iolog_user +# are set, I/O log files and directories are created with group-ID 0. +#iolog_group = wheel + +# The user to use when setting the user-ID and group-ID of new I/O +# log files and directories. If iolog_group is set, it will be used +# instead of the user's primary group-ID. By default, I/O log files +# and directories are created with user and group-ID 0. +iolog_user = root + +# The file mode to use when creating I/O log files. The file permissions +# will always include the owner read and write bits, even if they are +# not present in the specified mode. When creating I/O log directories, +# search (execute) bits are added to match the read and write bits +# specified by iolog_mode. +iolog_mode = 0600 + +# If disabled, sudo_logsrvd will attempt to avoid logging plaintext +# password in the terminal input using passprompt_regex. +log_passwords = true + +# The maximum sequence number that will be substituted for the "%{seq}" +# escape in the I/O log file. While the value substituted for "%{seq}" +# is in base 36, maxseq itself should be expressed in decimal. Values +# larger than 2176782336 (which corresponds to the base 36 sequence +# number "ZZZZZZ") will be silently truncated to 2176782336. +maxseq = 2176782336 + +# One or more POSIX extended regular expressions used to match +# password prompts in the terminal output when log_passwords is +# disabled. Multiple passprompt_regex settings may be specified. +#passprompt_regex = [Pp]assword[: ]* +#passprompt_regex = [Pp]assword for [a-z0-9]+: * +passprompt_regex = [Pp]assword[: ]* + +[eventlog] +# Where to log accept, reject, exit, and alert events. +# Accepted values are syslog, logfile, or none. +# Defaults to syslog +log_type = syslog + +# Whether to log an event when a command exits or is terminated by a signal. +# Defaults to false +log_exit = true + +# Event log format. +# Supported log formats are "sudo" and "json" +# Defaults to sudo +log_format = sudo + +[syslog] +# The maximum length of a syslog payload. +# On many systems, syslog(3) has a relatively small log buffer. +# IETF RFC 5424 states that syslog servers must support messages +# of at least 480 bytes and should support messages up to 2048 bytes. +# Messages larger than this value will be split into multiple messages. +maxlen = 960 + +# The syslog facility to use for event log messages. +# The following syslog facilities are supported: authpriv (if your OS +# supports it), auth, daemon, user, local0, local1, local2, local3, +# local4, local5, local6, and local7. +facility = authpriv + +# Syslog priority to use for event log accept messages, when the command +# is allowed by the security policy. The following syslog priorities are +# supported: alert, crit, debug, emerg, err, info, notice, warning, none. +accept_priority = low + +# Syslog priority to use for event log reject messages, when the command +# is not allowed by the security policy. +reject_priority = alert + +# Syslog priority to use for event log alert messages reported by the +# client. +alert_priority = alert + +# The syslog facility to use for server warning messages. +# Defaults to daemon. +server_facility = daemon + +[logfile] +# The path to the file-based event log. +# This path must be fully-qualified and start with a '/' character. +path = /var/log/sudo + +# The format string used when formatting the date and time for +# file-based event logs. Formatting is performed via strftime(3) so +# any format string supported by that function is allowed. +time_format = %h %e %T -- cgit v1.2.3