From ae581a19fbe896a797450b9d9573fb66f2735227 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 16:37:38 +0200 Subject: Adding upstream version 1.9.13p3. Signed-off-by: Daniel Baumann --- logsrvd/regress/logsrvd_conf/cacert.pem | 34 +++ logsrvd/regress/logsrvd_conf/logsrvd_cert.pem | 28 +++ logsrvd/regress/logsrvd_conf/logsrvd_conf_test.c | 89 ++++++++ logsrvd/regress/logsrvd_conf/logsrvd_dhparams.pem | 8 + logsrvd/regress/logsrvd_conf/logsrvd_key.pem | 28 +++ .../regress/logsrvd_conf/sudo_logsrvd.conf.1.in | 252 +++++++++++++++++++++ .../regress/logsrvd_conf/sudo_logsrvd.conf.2.in | 252 +++++++++++++++++++++ .../logsrvd_conf/tls/sudo_logsrvd.conf.1.in | 252 +++++++++++++++++++++ .../logsrvd_conf/tls/sudo_logsrvd.conf.2.in | 252 +++++++++++++++++++++ 9 files changed, 1195 insertions(+) create mode 100644 logsrvd/regress/logsrvd_conf/cacert.pem create mode 100644 logsrvd/regress/logsrvd_conf/logsrvd_cert.pem create mode 100644 logsrvd/regress/logsrvd_conf/logsrvd_conf_test.c create mode 100644 logsrvd/regress/logsrvd_conf/logsrvd_dhparams.pem create mode 100644 logsrvd/regress/logsrvd_conf/logsrvd_key.pem create mode 100644 logsrvd/regress/logsrvd_conf/sudo_logsrvd.conf.1.in create mode 100644 logsrvd/regress/logsrvd_conf/sudo_logsrvd.conf.2.in create mode 100644 logsrvd/regress/logsrvd_conf/tls/sudo_logsrvd.conf.1.in create mode 100644 logsrvd/regress/logsrvd_conf/tls/sudo_logsrvd.conf.2.in (limited to 'logsrvd/regress/logsrvd_conf') diff --git a/logsrvd/regress/logsrvd_conf/cacert.pem b/logsrvd/regress/logsrvd_conf/cacert.pem new file mode 100644 index 0000000..f74402d --- /dev/null +++ b/logsrvd/regress/logsrvd_conf/cacert.pem @@ -0,0 +1,34 @@ +-----BEGIN CERTIFICATE----- +MIIF/DCCA+SgAwIBAgIUOEgkFv51VLpqhnSlwmvTCjeq81kwDQYJKoZIhvcNAQEL +BQAwgYUxCzAJBgNVBAYTAlVTMREwDwYDVQQIDAhDb2xvcmFkbzEQMA4GA1UEBwwH +Qm91bGRlcjEVMBMGA1UECgwMU3VkbyBQcm9qZWN0MSMwIQYDVQQLDBpTdWRvIENl +cnRpZmljYXRlIEF1dGhvcml0eTEVMBMGA1UEAwwMU3VkbyBSb290IENBMCAXDTIy +MDYwMjE2NDQxMVoYDzIxMjIwNTA5MTY0NDExWjCBhTELMAkGA1UEBhMCVVMxETAP +BgNVBAgMCENvbG9yYWRvMRAwDgYDVQQHDAdCb3VsZGVyMRUwEwYDVQQKDAxTdWRv +IFByb2plY3QxIzAhBgNVBAsMGlN1ZG8gQ2VydGlmaWNhdGUgQXV0aG9yaXR5MRUw +EwYDVQQDDAxTdWRvIFJvb3QgQ0EwggIiMA0GCSqGSIb3DQEBAQUAA4ICDwAwggIK +AoICAQC8DASzPZlyg51mWLAJYPZDgHZL1gXQ9Nb+iYYfePz+9LPJ/ObPrDIWNC6j +wDIPPOlB6+UzVKDR7JtqVo4kzea1C+cZilCo5nX3uIvzsn484vtmUMTPCIBZ3mYq +zz4jIgkHxZwZlEhGRhf12sY+XeVwOvm73/iaODvodqjoQlvwwdZokov5HN1N8rCT ++uMH1TOPgz8pE365FjDmfZzizoslbxmoQLLmewFYsKQBpXMMurYkoXlSezoe+LWI +lm9HEZjo6/YtMjypA1S02CXmB9Y2wSMOCzLfrLsqJe8x3yZ/clOdAIGFmPBNbAE5 +mpLT3tCf1n1xBRXQoQ33fNcWgyR3hPdI5EcKmhR5RS5fO7KOaBdOInmqvIOlr+yT +jQVIk0jyEpW8Hf5vJypCsItgHtG2dz7XCoDVXKF7b270N+gSMhIa9XZLFiSsIgoM +uJfDe+URHL0+UMohcwkRknTnU1DR+uGZi29oIe8eYdvraV9XpOTySVa4HM9ZG8Yv +24EjzCJYGvSL1VFIK+q1NLt8uxXDPUAW4J8R9Teka5Hhkv6+iXGpYUqgy+jPW1yo +shLBKn+/T+CkjStAyRwezm9pCUdJOMGRuQIEOAYBJwbzY+Qwe8va//r+K44ORG6N +6Rq9QDApOxCn9lGuWiQM/jhOyN5vuMMPMKct8KatFw7d1hx5fwIDAQABo2AwXjAd +BgNVHQ4EFgQU/nKxgas9kLS2L7jmi1A+lowSMiAwHwYDVR0jBBgwFoAU/nKxgas9 +kLS2L7jmi1A+lowSMiAwDwYDVR0TAQH/BAUwAwEB/zALBgNVHQ8EBAMCAQYwDQYJ +KoZIhvcNAQELBQADggIBAIaABzzebiw6xi9PFhBlfK+KYVJqTdwgLqOzLsL4qgPc +J1XK+aQSC/WDleBVzMXeZdwKoRaU3Wcy+By6HWV52gjqOyhBlI2VgSDLGOYbXucM +eCTlrlRoap6ut1PVMuuVoSjQi0DMbhkz3ZGx/a0STefGADu0R9JTaJJN36JfTjSH +RBRDnhsEgZU5FVmTZqkZgATjRd7NwgmGAt17FvBuwBSAkt3NZmJTt7TzsCvtVBK2 +lkT4H+8m59lAp8Rk8RthRcAPQtMKsuvORBtwhbpLHbo9ilMRMc5rNc8IY9pzcQ0N +sMzyk8SIRov/PBnC1SPK+/jRhzLA/1gyzg5dt2jQIE5GhNqDQxi+f5HTMKklO8C9 +KHSeu9DZ32pBaNZPPvECkSZoTIsKroVvzuL/4drg4qxQFT/az4Z/rwnfVK8MYhDP +jKK19diEt36cQiDEr7WRCdhy8QmI49EBqE57LjOju5cuBXJnBFI05gbC4bQCzqZm +G2fHeHDX+QeBSfgzOP1aerd8mLiRymoJuBYDY50UzkGgg0gPoSVQKqE5YnYxP/Sz +HYoLv7N6COWqbtY9nmJTHwGGWoH40bIqSY8mGe34AZ7a/zVtvlcAgThlOH82dnPJ +vfUOIbVoOOliY2O7J0TZJGQVgsH5qNd4rdyKoL7kl59sU+wl/5UVME8pA+B/LFNF +-----END CERTIFICATE----- diff --git a/logsrvd/regress/logsrvd_conf/logsrvd_cert.pem b/logsrvd/regress/logsrvd_conf/logsrvd_cert.pem new file mode 100644 index 0000000..52ef5b6 --- /dev/null +++ b/logsrvd/regress/logsrvd_conf/logsrvd_cert.pem @@ -0,0 +1,28 @@ +-----BEGIN CERTIFICATE----- +MIIEwzCCAqugAwIBAgICEAAwDQYJKoZIhvcNAQELBQAwgYUxCzAJBgNVBAYTAlVT +MREwDwYDVQQIDAhDb2xvcmFkbzEQMA4GA1UEBwwHQm91bGRlcjEVMBMGA1UECgwM +U3VkbyBQcm9qZWN0MSMwIQYDVQQLDBpTdWRvIENlcnRpZmljYXRlIEF1dGhvcml0 +eTEVMBMGA1UEAwwMU3VkbyBSb290IENBMCAXDTIyMDYwMjE2NDUzM1oYDzIxMjIw +NTA5MTY0NTMzWjBlMQswCQYDVQQGEwJVUzERMA8GA1UECAwIQ29sb3JhZG8xFTAT +BgNVBAoMDFN1ZG8gUHJvamVjdDEYMBYGA1UECwwPU3VkbyBMb2cgU2VydmVyMRIw +EAYDVQQDDAkxMjcuMC4wLjEwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIB +AQC7/TKl0yMsu+65gomOkJN+LlVAqVHuONQXCC2zBpSNsP7mXaxx0uhDDxg6kope +J5f1diNX/Y5F60AlQn1a8cKOM1Cwvz7seTEZ1mCJay82Q3oyCCcSTjAa4ZDZbiag +n4e4WYqIOw5EE0DPk37UTdsqUfy90JxCUxSBMY5FQUJbc86ZadsWPb5SzsHTXfi2 +a5vyqHMm7dJ/C30cyJ8jDkChReO78DrQIZHpuj0T7otKxwQu0tkQ1bKEto7hEeOl +TblxrUZRkpumSUhFaZYt1DL6mrFinLtU9fYEFxE8f530D9mUtsZuPwYdqkantk7J +GqnpjwP0ypWFP0ckwJcn5FJHAgMBAAGjWjBYMAkGA1UdEwQCMAAwCwYDVR0PBAQD +AgXgMB0GA1UdDgQWBBTvAo8XDnHpwGZEAyUTSmiialQzSDAfBgNVHSMEGDAWgBT+ +crGBqz2QtLYvuOaLUD6WjBIyIDANBgkqhkiG9w0BAQsFAAOCAgEAHgUddk7bMYU5 +hdJiToCp0w32LQpHt8EepG4pWEzNdlnxBEb2D2f57JS3gVDoAyTAWxYipEdtCYx5 +2hMR4qrZ7G7G0D8XLj1A22nVlFUOqaUUIJRG1fFBGMM/T9CP1WLN2V2rYNoMFUdB +3aahuVKYK4TawWBhEA0cnZJeHwpg/0/B7jxYWtKF2ys8CdqBd9rgPoKZF/QfxKmz +otR7oZZuEaY9/kIkDtFaNb81JMbc/9RyBgB+5rQ8RmPcXDJ5aow5XvTWbx0LAwZZ +u1c104UxwEy062WLnpluqZ3obyJsA8G3X4kI/CffCGCjIIdnRPYQiBngKL4hvAUs +g/sD7Y1TrSWnEPJebpQwwYS4Y1HMPioDYJiGiehzZzUWWAC4itrj8mnycrTlvnev +wMh5XGHqAXd5iF+Ztw1thj2dRiVpLkyKEiPLEpTI3QL1xwnyK28fPZJyMeJ/WNJ3 +Yb51qlZw2pH8kfXoOaIINUC9ZsJujm+SBbO0JX9BK95w+23WGd8cSHRNEytsLESP +rvwljeCwQ7OqTmxT9iUBS8QZUM0ov3bF/oKpmcJe3xCAQCr2H41Fa1/CPrrco0Ar +Te0qU+Qy1ir5Qfu13qiU6Ea0d7PcOdYEe6sjHUQ4Z/o+/uQ1NJS26ahPNKOChcDe ++r8pnbtZ9uW6dQjdU6Yk6Gl6Z/vOxvU= +-----END CERTIFICATE----- diff --git a/logsrvd/regress/logsrvd_conf/logsrvd_conf_test.c b/logsrvd/regress/logsrvd_conf/logsrvd_conf_test.c new file mode 100644 index 0000000..84e66ed --- /dev/null +++ b/logsrvd/regress/logsrvd_conf/logsrvd_conf_test.c @@ -0,0 +1,89 @@ +/* + * SPDX-License-Identifier: ISC + * + * Copyright (c) 2022 Todd C. Miller + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include + +#include + +#ifdef HAVE_STDBOOL_H +# include +#else +# include "compat/stdbool.h" +#endif /* HAVE_STDBOOL_H */ +#include +#include +#include +#include + +#include "sudo_compat.h" +#include "sudo_util.h" +#include "sudo_iolog.h" +#include "sudo_queue.h" +#include "logsrvd.h" + +sudo_dso_public int main(int argc, char *argv[]); + +static void +usage(void) +{ + fprintf(stderr, "usage: %s [-v] conf_file\n", getprogname()); + exit(EXIT_FAILURE); +} + +/* + * Simple test driver for logsrvd_conf_read(). + * Just pases the file, errors to standard error. + */ +int +main(int argc, char *argv[]) +{ + bool verbose = false; + int ch, ntests, errors = 0; + + initprogname(argc > 0 ? argv[0] : "conf_test"); + + while ((ch = getopt(argc, argv, "v")) != -1) { + switch (ch) { + case 'v': + verbose = true; + break; + default: + usage(); + } + } + argc -= optind; + argv += optind; + + if (argc < 1) + usage(); + + for (ntests = 0; ntests < argc; ntests++) { + const char *path = argv[ntests]; + if (verbose) + printf("reading %s\n", path); + if (!logsrvd_conf_read(path)) + errors++; + } + logsrvd_conf_cleanup(); + + if (ntests != 0) { + printf("%s: %d tests run, %d errors, %d%% success rate\n", + getprogname(), ntests, errors, (ntests - errors) * 100 / ntests); + } + return errors; +} diff --git a/logsrvd/regress/logsrvd_conf/logsrvd_dhparams.pem b/logsrvd/regress/logsrvd_conf/logsrvd_dhparams.pem new file mode 100644 index 0000000..508846e --- /dev/null +++ b/logsrvd/regress/logsrvd_conf/logsrvd_dhparams.pem @@ -0,0 +1,8 @@ +-----BEGIN DH PARAMETERS----- +MIIBCAKCAQEA/QJRAmmGCZw79LyKinHUA0fEEzDiUkhuILieN0LLruznj4RBebQi +0sEa7YrFPG7z/eLU/aoBaJmWiX3ZOGReM1NoMJgZJezkY3HBiHombb9lBJHOSaHK +rT6viG3tBiu3DiByC+hdcp9xWfXkxgC944tIiTdFJtgYWw1KUBRHnSMob+ulZ2VE +COZE8HX7Nbp26fsfOKgcb/AX0fMLOetG0aaSgYAtyOGx1toRAFhEcdq/lusdkbzy +SUWwXfMXZorZoPudn31w7IN2wvDtP7v5fGqx6e9c91Orhy96sC7jmwedK/BGnkRi +XwnI6LNXwg30g4vLuinegqcNzmqcFY0wIwIBAg== +-----END DH PARAMETERS----- diff --git a/logsrvd/regress/logsrvd_conf/logsrvd_key.pem b/logsrvd/regress/logsrvd_conf/logsrvd_key.pem new file mode 100644 index 0000000..e586169 --- /dev/null +++ b/logsrvd/regress/logsrvd_conf/logsrvd_key.pem @@ -0,0 +1,28 @@ +-----BEGIN PRIVATE KEY----- +MIIEvQIBADANBgkqhkiG9w0BAQEFAASCBKcwggSjAgEAAoIBAQC7/TKl0yMsu+65 +gomOkJN+LlVAqVHuONQXCC2zBpSNsP7mXaxx0uhDDxg6kopeJ5f1diNX/Y5F60Al +Qn1a8cKOM1Cwvz7seTEZ1mCJay82Q3oyCCcSTjAa4ZDZbiagn4e4WYqIOw5EE0DP +k37UTdsqUfy90JxCUxSBMY5FQUJbc86ZadsWPb5SzsHTXfi2a5vyqHMm7dJ/C30c +yJ8jDkChReO78DrQIZHpuj0T7otKxwQu0tkQ1bKEto7hEeOlTblxrUZRkpumSUhF +aZYt1DL6mrFinLtU9fYEFxE8f530D9mUtsZuPwYdqkantk7JGqnpjwP0ypWFP0ck +wJcn5FJHAgMBAAECggEAA4H+N7l3v6t/ZmyKslU2EnXLUB3KfOrPb6hc90WOmy49 +pSuuTLz7adh6CbTeTeE96/wuWYqjq+AaVvszvrg+Xj3MqhiHd9Rdwmgbp0MBakyv +ls72zXRrJycIk8mfgR5x1MRYvaGTlXWa9KgsIzw+Anftnyw3yOJf+1oNmAE7ENzf +c3IBeQF040ahQleUoF6msNvjVrcKSiOpM8x+ectrx6S1vJP9rJFRp2g5Vlroskcs +ztPF4P9MFgsAzDd3HPtzBHXzoDNAlTwBbT6Ins6CeWENJY2KjRqntfQUJZfa12cQ +XE4v4HIBm2u8MxxjW4B3dNXcy4JY5yQu0RULJnGzYQKBgQDIuT2cVmdRDa9jyBUq +XWpMOwo4jHm1qTr750dvq93z2fSSKjmee67xq1hYER+elhm9dSyRBFBwpabv5eNH +4cZuvhlv4kJiIkXqohmhU1iQg4L5sKgXY9M8+MDsOr9SyCnAb7P/VyL2WsNgCB8l +40We9feeCFQFyZi24IsusGCIGQKBgQDvwjAljmzBaTrjZlWhAEGoxCZ9yql+U7VJ +6qu9hiSqetRDTAlo/ozFNvb5o0BCkOIg23zS48Fd99B082eYpXOpECK6rVOwdWwV +aOQyoXIEFm4ihK/okELKaI9vsZjA7gAbIyzLMPPnXL3zGYk+yQbOBEuOBBa8o478 +lFhvgW55XwKBgH9wJK7CqNvsLWPTn6SDJL77aRTYE1oD9OAESfWbj9KHmeDHEEgP +zNXA7NkVHhcow3TnFQGJVK0Ab0m2kiOMM9kRtsKzS2RU0EEU4+LqMLun05tFzqLz +DSWT5aDV96zOSrvT79r47sisfYjV/zil4Aj5r1nVfcsi4GOTkqp07wTZAoGBAOFH +Wkv/nkrBYJbI0g6cmhVEcVJi+Y18g+w3NzW2dH9HOGkfafwgqg6ojbmU3k1tqzvq +YEgbvtZXgqRRDPdOBvZE9gznzaoROwSG8VxtfB9BIC0I9eyUmF1tj9EIU5p8Rtc4 +3t7xWUv8RXLFfMLkyqMLQB7p0p9fI3xKuynSuQYLAoGAPK8qQvaR91sZLAvfkEYT +jeIAwr7ExN6W+lIO9FW9ctfCu/aePTsGSmH6TX0JIZN/6lZcTamaY45IRxJh7TgD +ZHBSRxkYIGQcsH2Eb6MwouQYuFWWicf3dY+oI0wejLZ+1TsBRJSsegV/36KgWVw3 +gAbhy0D+TKSGwK1tBLgKnB8= +-----END PRIVATE KEY----- diff --git a/logsrvd/regress/logsrvd_conf/sudo_logsrvd.conf.1.in b/logsrvd/regress/logsrvd_conf/sudo_logsrvd.conf.1.in new file mode 100644 index 0000000..ab92b8b --- /dev/null +++ b/logsrvd/regress/logsrvd_conf/sudo_logsrvd.conf.1.in @@ -0,0 +1,252 @@ +# +# sudo logsrv daemon configuration +# + +[server] +# The host name or IP address and port to listen on with an optional TLS +# flag. If no port is specified, port 30343 will be used for plaintext +# connections and port 30344 will be used to TLS connections. +# The following forms are accepted: +# listen_address = hostname(tls) +# listen_address = hostname:port(tls) +# listen_address = IPv4_address(tls) +# listen_address = IPv4_address:port(tls) +# listen_address = [IPv6_address](tls) +# listen_address = [IPv6_address]:port(tls) +# +# The (tls) suffix should be omitted for plaintext connections. +# +# Multiple listen_address settings may be specified. +# The default is to listen on all addresses. +listen_address = *:30343 +#listen_address = *:30344(tls) + +# The file containing the ID of the running sudo_logsrvd process. +pid_file = /var/run/sudo/sudo_logsrvd.pid + +# Where to log server warnings: none, stderr, syslog, or a path name. +server_log = syslog + +# If true, enable the SO_KEEPALIVE socket option on client connections. +# Defaults to true. +tcp_keepalive = true + +# The amount of time, in seconds, the server will wait for the client to +# respond. A value of 0 will disable the timeout. The default value is 30. +timeout = 30 + +# If true, the server will validate its own certificate at startup. +# Defaults to true. +#tls_verify = true + +# If true, client certificates will be validated by the server; +# clients without a valid certificate will be unable to connect. +# By default, client certs are not checked. +#tls_checkpeer = false + +# Path to a certificate authority bundle file in PEM format to use +# instead of the system's default certificate authority database. +#tls_cacert = regress/logsrvd_conf/cacert.pem + +# Path to the server's certificate file in PEM format. +# Required for TLS connections. +#tls_cert = regress/logsrvd_conf/logsrvd_cert.pem + +# Path to the server's private key file in PEM format. +# Required for TLS connections. +#tls_key = regress/logsrvd_conf/logsrvd_key.pem + +# TLS cipher list (see "CIPHER LIST FORMAT" in the openssl-ciphers manual). +# This setting is only effective if the negotiated protocol is TLS version +# 1.2. The default cipher list is HIGH:!aNULL. +#tls_ciphers_v12 = HIGH:!aNULL + +# TLS cipher list if the negotiated protocol is TLS version 1.3. +# The default cipher list is TLS_AES_256_GCM_SHA384. +#tls_ciphers_v13 = TLS_AES_256_GCM_SHA384 + +# Path to the Diffie-Hellman parameter file in PEM format. +# If not set, the server will use the OpenSSL defaults. +#tls_dhparams = regress/logsrvd_conf/logsrvd_dhparams.pem + +[relay] +# The host name or IP address and port to send logs to in relay mode. +# The syntax is identical to listen_address with the exception of +# the wild card ('*') syntax. When this setting is enabled, logs will +# be relayed to the specified host instead of being stored locally. +# This setting is not enabled by default. +#relay_host = relayhost.dom.ain +relay_host = 127.0.0.1 + +# The amount of time, in seconds, the server will wait for a connection +# to the relay server to complete. A value of 0 will disable the timeout. +# The default value is 30. +connect_timeout = 30 + +# The directory to store messages in before they are sent to the relay. +# Messages are stored in wire format. +# The default value is /var/log/sudo_logsrvd. +relay_dir = /var/log/sudo_logsrvd + +# The number of seconds to wait after a connection error before +# making a new attempt to forward a message to a relay host. +# The default value is 30. +retry_interval = 30 + +# Whether to store the log before relaying it. If true, enable store +# and forward mode. If false, the client connection is immediately +# relayed. Defaults to false. +store_first = true + +# If true, enable the SO_KEEPALIVE socket option on relay connections. +# Defaults to true. +tcp_keepalive = true + +# The amount of time, in seconds, the server will wait for the relay to +# respond. A value of 0 will disable the timeout. The default value is 30. +timeout = 30 + +# If true, the server's relay certificate will be verified at startup. +# The default is to use the value in the [server] section. +#tls_verify = true + +# Whether to verify the relay's certificate for TLS connections. +# The default is to use the value in the [server] section. +#tls_checkpeer = false + +# Path to a certificate authority bundle file in PEM format to use +# instead of the system's default certificate authority database. +# The default is to use the value in the [server] section. +#tls_cacert = regress/logsrvd_conf/cacert.pem + +# Path to the server's certificate file in PEM format. +# The default is to use the certificate in the [server] section. +#tls_cert = regress/logsrvd_conf/logsrvd_cert.pem + +# Path to the server's private key file in PEM format. +# The default is to use the key in the [server] section. +#tls_key = regress/logsrvd_conf/logsrvd_key.pem + +# TLS cipher list (see "CIPHER LIST FORMAT" in the openssl-ciphers manual). +# this setting is only effective if the negotiated protocol is TLS version +# 1.2. The default is to use the value in the [server] section. +#tls_ciphers_v12 = HIGH:!aNULL + +# TLS cipher list if the negotiated protocol is TLS version 1.3. +# The default is to use the value in the [server] section. +#tls_ciphers_v13 = TLS_AES_256_GCM_SHA384 + +# Path to the Diffie-Hellman parameter file in PEM format. +# The default is to use the value in the [server] section. +#tls_dhparams = regress/logsrvd_conf/logsrvd_dhparams.pem + +[iolog] +# The top-level directory to use when constructing the path name for the +# I/O log directory. The session sequence number, if any, is stored here. +iolog_dir = /var/log/sudo-io + +# The path name, relative to iolog_dir, in which to store I/O logs. +# It is possible for iolog_file to contain directory components. +iolog_file = %{seq} + +# If set, I/O logs will be compressed using zlib. Enabling compression can +# make it harder to view the logs in real-time as the program is executing. +iolog_compress = false + +# If set, I/O log data is flushed to disk after each write instead of +# buffering it. This makes it possible to view the logs in real-time +# as the program is executing but reduces the effectiveness of compression. +iolog_flush = true + +# The group to use when creating new I/O log files and directories. +# If iolog_group is not set, the primary group-ID of the user specified +# by iolog_user is used. If neither iolog_group nor iolog_user +# are set, I/O log files and directories are created with group-ID 0. +#iolog_group = wheel + +# The user to use when setting the user-ID and group-ID of new I/O +# log files and directories. If iolog_group is set, it will be used +# instead of the user's primary group-ID. By default, I/O log files +# and directories are created with user and group-ID 0. +#iolog_user = root + +# The file mode to use when creating I/O log files. The file permissions +# will always include the owner read and write bits, even if they are +# not present in the specified mode. When creating I/O log directories, +# search (execute) bits are added to match the read and write bits +# specified by iolog_mode. +iolog_mode = 0600 + +# If disabled, sudo_logsrvd will attempt to avoid logging plaintext +# password in the terminal input using passprompt_regex. +log_passwords = true + +# The maximum sequence number that will be substituted for the "%{seq}" +# escape in the I/O log file. While the value substituted for "%{seq}" +# is in base 36, maxseq itself should be expressed in decimal. Values +# larger than 2176782336 (which corresponds to the base 36 sequence +# number "ZZZZZZ") will be silently truncated to 2176782336. +maxseq = 2176782336 + +# One or more POSIX extended regular expressions used to match +# password prompts in the terminal output when log_passwords is +# disabled. Multiple passprompt_regex settings may be specified. +#passprompt_regex = [Pp]assword[: ]* +passprompt_regex = [Pp]assword for [a-z0-9]+: * + +[eventlog] +# Where to log accept, reject, exit, and alert events. +# Accepted values are syslog, logfile, or none. +# Defaults to syslog +log_type = syslog + +# Whether to log an event when a command exits or is terminated by a signal. +# Defaults to false +log_exit = true + +# Event log format. +# Supported log formats are "sudo" and "json" +# Defaults to sudo +log_format = sudo + +[syslog] +# The maximum length of a syslog payload. +# On many systems, syslog(3) has a relatively small log buffer. +# IETF RFC 5424 states that syslog servers must support messages +# of at least 480 bytes and should support messages up to 2048 bytes. +# Messages larger than this value will be split into multiple messages. +maxlen = 960 + +# The syslog facility to use for event log messages. +# The following syslog facilities are supported: authpriv (if your OS +# supports it), auth, daemon, user, local0, local1, local2, local3, +# local4, local5, local6, and local7. +#facility = authpriv +facility = auth + +# Syslog priority to use for event log accept messages, when the command +# is allowed by the security policy. The following syslog priorities are +# supported: alert, crit, debug, emerg, err, info, notice, warning, none. +accept_priority = notice + +# Syslog priority to use for event log reject messages, when the command +# is not allowed by the security policy. +reject_priority = alert + +# Syslog priority to use for event log alert messages reported by the +# client. +alert_priority = alert + +# The syslog facility to use for server warning messages. +# Defaults to daemon. +server_facility = daemon + +[logfile] +# The path to the file-based event log. +# This path must be fully-qualified and start with a '/' character. +path = /var/log/sudo.log + +# The format string used when formatting the date and time for +# file-based event logs. Formatting is performed via strftime(3) so +# any format string supported by that function is allowed. +time_format = %h %e %T diff --git a/logsrvd/regress/logsrvd_conf/sudo_logsrvd.conf.2.in b/logsrvd/regress/logsrvd_conf/sudo_logsrvd.conf.2.in new file mode 100644 index 0000000..01b91ff --- /dev/null +++ b/logsrvd/regress/logsrvd_conf/sudo_logsrvd.conf.2.in @@ -0,0 +1,252 @@ +# +# sudo logsrv daemon configuration +# + +[server] +# The host name or IP address and port to listen on with an optional TLS +# flag. If no port is specified, port 30343 will be used for plaintext +# connections and port 30344 will be used to TLS connections. +# The following forms are accepted: +# listen_address = hostname(tls) +# listen_address = hostname:port(tls) +# listen_address = IPv4_address(tls) +# listen_address = IPv4_address:port(tls) +# listen_address = [IPv6_address](tls) +# listen_address = [IPv6_address]:port(tls) +# +# The (tls) suffix should be omitted for plaintext connections. +# +# Multiple listen_address settings may be specified. +# The default is to listen on all addresses. +listen_address = 172.0.0.1:30343 +#listen_address = 172.0.0.1:30344(tls) + +# The file containing the ID of the running sudo_logsrvd process. +pid_file = /var/run/sudo/sudo_logsrvd.pid + +# Where to log server warnings: none, stderr, syslog, or a path name. +server_log = stderr + +# If true, enable the SO_KEEPALIVE socket option on client connections. +# Defaults to true. +tcp_keepalive = true + +# The amount of time, in seconds, the server will wait for the client to +# respond. A value of 0 will disable the timeout. The default value is 30. +timeout = 30 + +# If true, the server will validate its own certificate at startup. +# Defaults to true. +#tls_verify = false + +# If true, client certificates will be validated by the server; +# clients without a valid certificate will be unable to connect. +# By default, client certs are not checked. +#tls_checkpeer = true + +# Path to a certificate authority bundle file in PEM format to use +# instead of the system's default certificate authority database. +#tls_cacert = regress/logsrvd_conf/cacert.pem + +# Path to the server's certificate file in PEM format. +# Required for TLS connections. +#tls_cert = regress/logsrvd_conf/logsrvd_cert.pem + +# Path to the server's private key file in PEM format. +# Required for TLS connections. +#tls_key = regress/logsrvd_conf/logsrvd_key.pem + +# TLS cipher list (see "CIPHER LIST FORMAT" in the openssl-ciphers manual). +# This setting is only effective if the negotiated protocol is TLS version +# 1.2. The default cipher list is HIGH:!aNULL. +#tls_ciphers_v12 = HIGH:!aNULL + +# TLS cipher list if the negotiated protocol is TLS version 1.3. +# The default cipher list is TLS_AES_256_GCM_SHA384. +#tls_ciphers_v13 = TLS_AES_256_GCM_SHA384 + +# Path to the Diffie-Hellman parameter file in PEM format. +# If not set, the server will use the OpenSSL defaults. +#tls_dhparams = regress/logsrvd_conf/logsrvd_dhparams.pem + +[relay] +# The host name or IP address and port to send logs to in relay mode. +# The syntax is identical to listen_address with the exception of +# the wild card ('*') syntax. When this setting is enabled, logs will +# be relayed to the specified host instead of being stored locally. +# This setting is not enabled by default. +#relay_host = relayhost.dom.ain +relay_host = 127.0.0.1 + +# The amount of time, in seconds, the server will wait for a connection +# to the relay server to complete. A value of 0 will disable the timeout. +# The default value is 30. +connect_timeout = 30 + +# The directory to store messages in before they are sent to the relay. +# Messages are stored in wire format. +# The default value is /var/log/sudo_logsrvd. +relay_dir = /var/log/sudo_logsrvd + +# The number of seconds to wait after a connection error before +# making a new attempt to forward a message to a relay host. +# The default value is 30. +retry_interval = 30 + +# Whether to store the log before relaying it. If true, enable store +# and forward mode. If false, the client connection is immediately +# relayed. Defaults to false. +store_first = true + +# If true, enable the SO_KEEPALIVE socket option on relay connections. +# Defaults to true. +tcp_keepalive = true + +# The amount of time, in seconds, the server will wait for the relay to +# respond. A value of 0 will disable the timeout. The default value is 30. +timeout = 30 + +# If true, the server's relay certificate will be verified at startup. +# The default is to use the value in the [server] section. +#tls_verify = true + +# Whether to verify the relay's certificate for TLS connections. +# The default is to use the value in the [server] section. +#tls_checkpeer = false + +# Path to a certificate authority bundle file in PEM format to use +# instead of the system's default certificate authority database. +# The default is to use the value in the [server] section. +#tls_cacert = regress/logsrvd_conf/cacert.pem + +# Path to the server's certificate file in PEM format. +# The default is to use the certificate in the [server] section. +#tls_cert = regress/logsrvd_conf/logsrvd_cert.pem + +# Path to the server's private key file in PEM format. +# The default is to use the key in the [server] section. +#tls_key = regress/logsrvd_conf/logsrvd_key.pem + +# TLS cipher list (see "CIPHER LIST FORMAT" in the openssl-ciphers manual). +# this setting is only effective if the negotiated protocol is TLS version +# 1.2. The default is to use the value in the [server] section. +#tls_ciphers_v12 = HIGH:!aNULL + +# TLS cipher list if the negotiated protocol is TLS version 1.3. +# The default is to use the value in the [server] section. +#tls_ciphers_v13 = TLS_AES_256_GCM_SHA384 + +# Path to the Diffie-Hellman parameter file in PEM format. +# The default is to use the value in the [server] section. +#tls_dhparams = regress/logsrvd_conf/logsrvd_dhparams.pem + +[iolog] +# The top-level directory to use when constructing the path name for the +# I/O log directory. The session sequence number, if any, is stored here. +iolog_dir = /var/log/sudo-io + +# The path name, relative to iolog_dir, in which to store I/O logs. +# It is possible for iolog_file to contain directory components. +iolog_file = %{seq} + +# If set, I/O logs will be compressed using zlib. Enabling compression can +# make it harder to view the logs in real-time as the program is executing. +iolog_compress = false + +# If set, I/O log data is flushed to disk after each write instead of +# buffering it. This makes it possible to view the logs in real-time +# as the program is executing but reduces the effectiveness of compression. +iolog_flush = true + +# The group to use when creating new I/O log files and directories. +# If iolog_group is not set, the primary group-ID of the user specified +# by iolog_user is used. If neither iolog_group nor iolog_user +# are set, I/O log files and directories are created with group-ID 0. +#iolog_group = wheel + +# The user to use when setting the user-ID and group-ID of new I/O +# log files and directories. If iolog_group is set, it will be used +# instead of the user's primary group-ID. By default, I/O log files +# and directories are created with user and group-ID 0. +#iolog_user = root + +# The file mode to use when creating I/O log files. The file permissions +# will always include the owner read and write bits, even if they are +# not present in the specified mode. When creating I/O log directories, +# search (execute) bits are added to match the read and write bits +# specified by iolog_mode. +iolog_mode = 0600 + +# If disabled, sudo_logsrvd will attempt to avoid logging plaintext +# password in the terminal input using passprompt_regex. +log_passwords = true + +# The maximum sequence number that will be substituted for the "%{seq}" +# escape in the I/O log file. While the value substituted for "%{seq}" +# is in base 36, maxseq itself should be expressed in decimal. Values +# larger than 2176782336 (which corresponds to the base 36 sequence +# number "ZZZZZZ") will be silently truncated to 2176782336. +maxseq = 2176782336 + +# One or more POSIX extended regular expressions used to match +# password prompts in the terminal output when log_passwords is +# disabled. Multiple passprompt_regex settings may be specified. +#passprompt_regex = [Pp]assword[: ]* +passprompt_regex = [Pp]assword for [a-z0-9]+: * + +[eventlog] +# Where to log accept, reject, exit, and alert events. +# Accepted values are syslog, logfile, or none. +# Defaults to syslog +log_type = none + +# Whether to log an event when a command exits or is terminated by a signal. +# Defaults to false +log_exit = true + +# Event log format. +# Supported log formats are "sudo" and "json" +# Defaults to sudo +log_format = json + +[syslog] +# The maximum length of a syslog payload. +# On many systems, syslog(3) has a relatively small log buffer. +# IETF RFC 5424 states that syslog servers must support messages +# of at least 480 bytes and should support messages up to 2048 bytes. +# Messages larger than this value will be split into multiple messages. +maxlen = 960 + +# The syslog facility to use for event log messages. +# The following syslog facilities are supported: authpriv (if your OS +# supports it), auth, daemon, user, local0, local1, local2, local3, +# local4, local5, local6, and local7. +#facility = authpriv +facility = daemon + +# Syslog priority to use for event log accept messages, when the command +# is allowed by the security policy. The following syslog priorities are +# supported: alert, crit, debug, emerg, err, info, notice, warning, none. +accept_priority = notice + +# Syslog priority to use for event log reject messages, when the command +# is not allowed by the security policy. +reject_priority = alert + +# Syslog priority to use for event log alert messages reported by the +# client. +alert_priority = alert + +# The syslog facility to use for server warning messages. +# Defaults to daemon. +server_facility = daemon + +[logfile] +# The path to the file-based event log. +# This path must be fully-qualified and start with a '/' character. +path = /var/log/sudo.log + +# The format string used when formatting the date and time for +# file-based event logs. Formatting is performed via strftime(3) so +# any format string supported by that function is allowed. +time_format = %h %e %T diff --git a/logsrvd/regress/logsrvd_conf/tls/sudo_logsrvd.conf.1.in b/logsrvd/regress/logsrvd_conf/tls/sudo_logsrvd.conf.1.in new file mode 100644 index 0000000..6d97f44 --- /dev/null +++ b/logsrvd/regress/logsrvd_conf/tls/sudo_logsrvd.conf.1.in @@ -0,0 +1,252 @@ +# +# sudo logsrv daemon configuration +# + +[server] +# The host name or IP address and port to listen on with an optional TLS +# flag. If no port is specified, port 30343 will be used for plaintext +# connections and port 30344 will be used to TLS connections. +# The following forms are accepted: +# listen_address = hostname(tls) +# listen_address = hostname:port(tls) +# listen_address = IPv4_address(tls) +# listen_address = IPv4_address:port(tls) +# listen_address = [IPv6_address](tls) +# listen_address = [IPv6_address]:port(tls) +# +# The (tls) suffix should be omitted for plaintext connections. +# +# Multiple listen_address settings may be specified. +# The default is to listen on all addresses. +listen_address = *:30343 +listen_address = *:30344(tls) + +# The file containing the ID of the running sudo_logsrvd process. +pid_file = /var/run/sudo/sudo_logsrvd.pid + +# Where to log server warnings: none, stderr, syslog, or a path name. +server_log = syslog + +# If true, enable the SO_KEEPALIVE socket option on client connections. +# Defaults to true. +tcp_keepalive = true + +# The amount of time, in seconds, the server will wait for the client to +# respond. A value of 0 will disable the timeout. The default value is 30. +timeout = 30 + +# If true, the server will validate its own certificate at startup. +# Defaults to true. +tls_verify = true + +# If true, client certificates will be validated by the server; +# clients without a valid certificate will be unable to connect. +# By default, client certs are not checked. +tls_checkpeer = false + +# Path to a certificate authority bundle file in PEM format to use +# instead of the system's default certificate authority database. +tls_cacert = regress/logsrvd_conf/cacert.pem + +# Path to the server's certificate file in PEM format. +# Required for TLS connections. +tls_cert = regress/logsrvd_conf/logsrvd_cert.pem + +# Path to the server's private key file in PEM format. +# Required for TLS connections. +tls_key = regress/logsrvd_conf/logsrvd_key.pem + +# TLS cipher list (see "CIPHER LIST FORMAT" in the openssl-ciphers manual). +# This setting is only effective if the negotiated protocol is TLS version +# 1.2. The default cipher list is HIGH:!aNULL. +tls_ciphers_v12 = HIGH:!aNULL + +# TLS cipher list if the negotiated protocol is TLS version 1.3. +# The default cipher list is TLS_AES_256_GCM_SHA384. +tls_ciphers_v13 = TLS_AES_256_GCM_SHA384 + +# Path to the Diffie-Hellman parameter file in PEM format. +# If not set, the server will use the OpenSSL defaults. +tls_dhparams = regress/logsrvd_conf/logsrvd_dhparams.pem + +[relay] +# The host name or IP address and port to send logs to in relay mode. +# The syntax is identical to listen_address with the exception of +# the wild card ('*') syntax. When this setting is enabled, logs will +# be relayed to the specified host instead of being stored locally. +# This setting is not enabled by default. +#relay_host = relayhost.dom.ain +relay_host = 127.0.0.1(tls) + +# The amount of time, in seconds, the server will wait for a connection +# to the relay server to complete. A value of 0 will disable the timeout. +# The default value is 30. +connect_timeout = 30 + +# The directory to store messages in before they are sent to the relay. +# Messages are stored in wire format. +# The default value is /var/log/sudo_logsrvd. +relay_dir = /var/log/sudo_logsrvd + +# The number of seconds to wait after a connection error before +# making a new attempt to forward a message to a relay host. +# The default value is 30. +retry_interval = 30 + +# Whether to store the log before relaying it. If true, enable store +# and forward mode. If false, the client connection is immediately +# relayed. Defaults to false. +store_first = true + +# If true, enable the SO_KEEPALIVE socket option on relay connections. +# Defaults to true. +tcp_keepalive = true + +# The amount of time, in seconds, the server will wait for the relay to +# respond. A value of 0 will disable the timeout. The default value is 30. +timeout = 30 + +# If true, the server's relay certificate will be verified at startup. +# The default is to use the value in the [server] section. +tls_verify = true + +# Whether to verify the relay's certificate for TLS connections. +# The default is to use the value in the [server] section. +tls_checkpeer = false + +# Path to a certificate authority bundle file in PEM format to use +# instead of the system's default certificate authority database. +# The default is to use the value in the [server] section. +tls_cacert = regress/logsrvd_conf/cacert.pem + +# Path to the server's certificate file in PEM format. +# The default is to use the certificate in the [server] section. +tls_cert = regress/logsrvd_conf/logsrvd_cert.pem + +# Path to the server's private key file in PEM format. +# The default is to use the key in the [server] section. +tls_key = regress/logsrvd_conf/logsrvd_key.pem + +# TLS cipher list (see "CIPHER LIST FORMAT" in the openssl-ciphers manual). +# this setting is only effective if the negotiated protocol is TLS version +# 1.2. The default is to use the value in the [server] section. +tls_ciphers_v12 = HIGH:!aNULL + +# TLS cipher list if the negotiated protocol is TLS version 1.3. +# The default is to use the value in the [server] section. +tls_ciphers_v13 = TLS_AES_256_GCM_SHA384 + +# Path to the Diffie-Hellman parameter file in PEM format. +# The default is to use the value in the [server] section. +tls_dhparams = regress/logsrvd_conf/logsrvd_dhparams.pem + +[iolog] +# The top-level directory to use when constructing the path name for the +# I/O log directory. The session sequence number, if any, is stored here. +iolog_dir = /var/log/sudo-io + +# The path name, relative to iolog_dir, in which to store I/O logs. +# It is possible for iolog_file to contain directory components. +iolog_file = %{seq} + +# If set, I/O logs will be compressed using zlib. Enabling compression can +# make it harder to view the logs in real-time as the program is executing. +iolog_compress = false + +# If set, I/O log data is flushed to disk after each write instead of +# buffering it. This makes it possible to view the logs in real-time +# as the program is executing but reduces the effectiveness of compression. +iolog_flush = true + +# The group to use when creating new I/O log files and directories. +# If iolog_group is not set, the primary group-ID of the user specified +# by iolog_user is used. If neither iolog_group nor iolog_user +# are set, I/O log files and directories are created with group-ID 0. +#iolog_group = wheel + +# The user to use when setting the user-ID and group-ID of new I/O +# log files and directories. If iolog_group is set, it will be used +# instead of the user's primary group-ID. By default, I/O log files +# and directories are created with user and group-ID 0. +#iolog_user = root + +# The file mode to use when creating I/O log files. The file permissions +# will always include the owner read and write bits, even if they are +# not present in the specified mode. When creating I/O log directories, +# search (execute) bits are added to match the read and write bits +# specified by iolog_mode. +iolog_mode = 0600 + +# If disabled, sudo_logsrvd will attempt to avoid logging plaintext +# password in the terminal input using passprompt_regex. +log_passwords = true + +# The maximum sequence number that will be substituted for the "%{seq}" +# escape in the I/O log file. While the value substituted for "%{seq}" +# is in base 36, maxseq itself should be expressed in decimal. Values +# larger than 2176782336 (which corresponds to the base 36 sequence +# number "ZZZZZZ") will be silently truncated to 2176782336. +maxseq = 2176782336 + +# One or more POSIX extended regular expressions used to match +# password prompts in the terminal output when log_passwords is +# disabled. Multiple passprompt_regex settings may be specified. +#passprompt_regex = [Pp]assword[: ]* +passprompt_regex = [Pp]assword for [a-z0-9]+: * + +[eventlog] +# Where to log accept, reject, exit, and alert events. +# Accepted values are syslog, logfile, or none. +# Defaults to syslog +log_type = syslog + +# Whether to log an event when a command exits or is terminated by a signal. +# Defaults to false +log_exit = true + +# Event log format. +# Supported log formats are "sudo" and "json" +# Defaults to sudo +log_format = sudo + +[syslog] +# The maximum length of a syslog payload. +# On many systems, syslog(3) has a relatively small log buffer. +# IETF RFC 5424 states that syslog servers must support messages +# of at least 480 bytes and should support messages up to 2048 bytes. +# Messages larger than this value will be split into multiple messages. +maxlen = 960 + +# The syslog facility to use for event log messages. +# The following syslog facilities are supported: authpriv (if your OS +# supports it), auth, daemon, user, local0, local1, local2, local3, +# local4, local5, local6, and local7. +#facility = authpriv +facility = auth + +# Syslog priority to use for event log accept messages, when the command +# is allowed by the security policy. The following syslog priorities are +# supported: alert, crit, debug, emerg, err, info, notice, warning, none. +accept_priority = notice + +# Syslog priority to use for event log reject messages, when the command +# is not allowed by the security policy. +reject_priority = alert + +# Syslog priority to use for event log alert messages reported by the +# client. +alert_priority = alert + +# The syslog facility to use for server warning messages. +# Defaults to daemon. +server_facility = daemon + +[logfile] +# The path to the file-based event log. +# This path must be fully-qualified and start with a '/' character. +path = /var/log/sudo.log + +# The format string used when formatting the date and time for +# file-based event logs. Formatting is performed via strftime(3) so +# any format string supported by that function is allowed. +time_format = %h %e %T diff --git a/logsrvd/regress/logsrvd_conf/tls/sudo_logsrvd.conf.2.in b/logsrvd/regress/logsrvd_conf/tls/sudo_logsrvd.conf.2.in new file mode 100644 index 0000000..0e71f67 --- /dev/null +++ b/logsrvd/regress/logsrvd_conf/tls/sudo_logsrvd.conf.2.in @@ -0,0 +1,252 @@ +# +# sudo logsrv daemon configuration +# + +[server] +# The host name or IP address and port to listen on with an optional TLS +# flag. If no port is specified, port 30343 will be used for plaintext +# connections and port 30344 will be used to TLS connections. +# The following forms are accepted: +# listen_address = hostname(tls) +# listen_address = hostname:port(tls) +# listen_address = IPv4_address(tls) +# listen_address = IPv4_address:port(tls) +# listen_address = [IPv6_address](tls) +# listen_address = [IPv6_address]:port(tls) +# +# The (tls) suffix should be omitted for plaintext connections. +# +# Multiple listen_address settings may be specified. +# The default is to listen on all addresses. +listen_address = 172.0.0.1:30343 +listen_address = 172.0.0.1:30344(tls) + +# The file containing the ID of the running sudo_logsrvd process. +pid_file = /var/run/sudo/sudo_logsrvd.pid + +# Where to log server warnings: none, stderr, syslog, or a path name. +server_log = stderr + +# If true, enable the SO_KEEPALIVE socket option on client connections. +# Defaults to true. +tcp_keepalive = true + +# The amount of time, in seconds, the server will wait for the client to +# respond. A value of 0 will disable the timeout. The default value is 30. +timeout = 30 + +# If true, the server will validate its own certificate at startup. +# Defaults to true. +tls_verify = false + +# If true, client certificates will be validated by the server; +# clients without a valid certificate will be unable to connect. +# By default, client certs are not checked. +tls_checkpeer = true + +# Path to a certificate authority bundle file in PEM format to use +# instead of the system's default certificate authority database. +tls_cacert = regress/logsrvd_conf/cacert.pem + +# Path to the server's certificate file in PEM format. +# Required for TLS connections. +tls_cert = regress/logsrvd_conf/logsrvd_cert.pem + +# Path to the server's private key file in PEM format. +# Required for TLS connections. +tls_key = regress/logsrvd_conf/logsrvd_key.pem + +# TLS cipher list (see "CIPHER LIST FORMAT" in the openssl-ciphers manual). +# This setting is only effective if the negotiated protocol is TLS version +# 1.2. The default cipher list is HIGH:!aNULL. +tls_ciphers_v12 = HIGH:!aNULL + +# TLS cipher list if the negotiated protocol is TLS version 1.3. +# The default cipher list is TLS_AES_256_GCM_SHA384. +tls_ciphers_v13 = TLS_AES_256_GCM_SHA384 + +# Path to the Diffie-Hellman parameter file in PEM format. +# If not set, the server will use the OpenSSL defaults. +tls_dhparams = regress/logsrvd_conf/logsrvd_dhparams.pem + +[relay] +# The host name or IP address and port to send logs to in relay mode. +# The syntax is identical to listen_address with the exception of +# the wild card ('*') syntax. When this setting is enabled, logs will +# be relayed to the specified host instead of being stored locally. +# This setting is not enabled by default. +#relay_host = relayhost.dom.ain +relay_host = 127.0.0.1(tls) + +# The amount of time, in seconds, the server will wait for a connection +# to the relay server to complete. A value of 0 will disable the timeout. +# The default value is 30. +connect_timeout = 30 + +# The directory to store messages in before they are sent to the relay. +# Messages are stored in wire format. +# The default value is /var/log/sudo_logsrvd. +relay_dir = /var/log/sudo_logsrvd + +# The number of seconds to wait after a connection error before +# making a new attempt to forward a message to a relay host. +# The default value is 30. +retry_interval = 30 + +# Whether to store the log before relaying it. If true, enable store +# and forward mode. If false, the client connection is immediately +# relayed. Defaults to false. +store_first = true + +# If true, enable the SO_KEEPALIVE socket option on relay connections. +# Defaults to true. +tcp_keepalive = true + +# The amount of time, in seconds, the server will wait for the relay to +# respond. A value of 0 will disable the timeout. The default value is 30. +timeout = 30 + +# If true, the server's relay certificate will be verified at startup. +# The default is to use the value in the [server] section. +tls_verify = true + +# Whether to verify the relay's certificate for TLS connections. +# The default is to use the value in the [server] section. +tls_checkpeer = false + +# Path to a certificate authority bundle file in PEM format to use +# instead of the system's default certificate authority database. +# The default is to use the value in the [server] section. +tls_cacert = regress/logsrvd_conf/cacert.pem + +# Path to the server's certificate file in PEM format. +# The default is to use the certificate in the [server] section. +tls_cert = regress/logsrvd_conf/logsrvd_cert.pem + +# Path to the server's private key file in PEM format. +# The default is to use the key in the [server] section. +tls_key = regress/logsrvd_conf/logsrvd_key.pem + +# TLS cipher list (see "CIPHER LIST FORMAT" in the openssl-ciphers manual). +# this setting is only effective if the negotiated protocol is TLS version +# 1.2. The default is to use the value in the [server] section. +tls_ciphers_v12 = HIGH:!aNULL + +# TLS cipher list if the negotiated protocol is TLS version 1.3. +# The default is to use the value in the [server] section. +tls_ciphers_v13 = TLS_AES_256_GCM_SHA384 + +# Path to the Diffie-Hellman parameter file in PEM format. +# The default is to use the value in the [server] section. +tls_dhparams = regress/logsrvd_conf/logsrvd_dhparams.pem + +[iolog] +# The top-level directory to use when constructing the path name for the +# I/O log directory. The session sequence number, if any, is stored here. +iolog_dir = /var/log/sudo-io + +# The path name, relative to iolog_dir, in which to store I/O logs. +# It is possible for iolog_file to contain directory components. +iolog_file = %{seq} + +# If set, I/O logs will be compressed using zlib. Enabling compression can +# make it harder to view the logs in real-time as the program is executing. +iolog_compress = false + +# If set, I/O log data is flushed to disk after each write instead of +# buffering it. This makes it possible to view the logs in real-time +# as the program is executing but reduces the effectiveness of compression. +iolog_flush = true + +# The group to use when creating new I/O log files and directories. +# If iolog_group is not set, the primary group-ID of the user specified +# by iolog_user is used. If neither iolog_group nor iolog_user +# are set, I/O log files and directories are created with group-ID 0. +#iolog_group = wheel + +# The user to use when setting the user-ID and group-ID of new I/O +# log files and directories. If iolog_group is set, it will be used +# instead of the user's primary group-ID. By default, I/O log files +# and directories are created with user and group-ID 0. +#iolog_user = root + +# The file mode to use when creating I/O log files. The file permissions +# will always include the owner read and write bits, even if they are +# not present in the specified mode. When creating I/O log directories, +# search (execute) bits are added to match the read and write bits +# specified by iolog_mode. +iolog_mode = 0600 + +# If disabled, sudo_logsrvd will attempt to avoid logging plaintext +# password in the terminal input using passprompt_regex. +log_passwords = true + +# The maximum sequence number that will be substituted for the "%{seq}" +# escape in the I/O log file. While the value substituted for "%{seq}" +# is in base 36, maxseq itself should be expressed in decimal. Values +# larger than 2176782336 (which corresponds to the base 36 sequence +# number "ZZZZZZ") will be silently truncated to 2176782336. +maxseq = 2176782336 + +# One or more POSIX extended regular expressions used to match +# password prompts in the terminal output when log_passwords is +# disabled. Multiple passprompt_regex settings may be specified. +#passprompt_regex = [Pp]assword[: ]* +passprompt_regex = [Pp]assword for [a-z0-9]+: * + +[eventlog] +# Where to log accept, reject, exit, and alert events. +# Accepted values are syslog, logfile, or none. +# Defaults to syslog +log_type = none + +# Whether to log an event when a command exits or is terminated by a signal. +# Defaults to false +log_exit = true + +# Event log format. +# Supported log formats are "sudo" and "json" +# Defaults to sudo +log_format = json + +[syslog] +# The maximum length of a syslog payload. +# On many systems, syslog(3) has a relatively small log buffer. +# IETF RFC 5424 states that syslog servers must support messages +# of at least 480 bytes and should support messages up to 2048 bytes. +# Messages larger than this value will be split into multiple messages. +maxlen = 960 + +# The syslog facility to use for event log messages. +# The following syslog facilities are supported: authpriv (if your OS +# supports it), auth, daemon, user, local0, local1, local2, local3, +# local4, local5, local6, and local7. +#facility = authpriv +facility = daemon + +# Syslog priority to use for event log accept messages, when the command +# is allowed by the security policy. The following syslog priorities are +# supported: alert, crit, debug, emerg, err, info, notice, warning, none. +accept_priority = notice + +# Syslog priority to use for event log reject messages, when the command +# is not allowed by the security policy. +reject_priority = alert + +# Syslog priority to use for event log alert messages reported by the +# client. +alert_priority = alert + +# The syslog facility to use for server warning messages. +# Defaults to daemon. +server_facility = daemon + +[logfile] +# The path to the file-based event log. +# This path must be fully-qualified and start with a '/' character. +path = /var/log/sudo.log + +# The format string used when formatting the date and time for +# file-based event logs. Formatting is performed via strftime(3) so +# any format string supported by that function is allowed. +time_format = %h %e %T -- cgit v1.2.3