summaryrefslogtreecommitdiffstats
path: root/test/README.testsuite
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--test/README.testsuite266
1 files changed, 266 insertions, 0 deletions
diff --git a/test/README.testsuite b/test/README.testsuite
new file mode 100644
index 0000000..69ea2ab
--- /dev/null
+++ b/test/README.testsuite
@@ -0,0 +1,266 @@
+The extended testsuite only works with UID=0. It consists of the subdirectories
+named "test/TEST-??-*", each of which contains a description of an OS image and
+a test which consists of systemd units and scripts to execute in this image.
+The same image is used for execution under `systemd-nspawn` and `qemu`.
+
+To run the extended testsuite do the following:
+
+$ ninja -C build # Avoid building anything as root later
+$ sudo test/run-integration-tests.sh
+ninja: Entering directory `/home/zbyszek/src/systemd/build'
+ninja: no work to do.
+--x-- Running TEST-01-BASIC --x--
++ make -C TEST-01-BASIC clean setup run
+make: Entering directory '/home/zbyszek/src/systemd/test/TEST-01-BASIC'
+TEST-01-BASIC CLEANUP: Basic systemd setup
+TEST-01-BASIC SETUP: Basic systemd setup
+...
+TEST-01-BASIC RUN: Basic systemd setup [OK]
+make: Leaving directory '/home/zbyszek/src/systemd/test/TEST-01-BASIC'
+--x-- Result of TEST-01-BASIC: 0 --x--
+--x-- Running TEST-02-CRYPTSETUP --x--
++ make -C TEST-02-CRYPTSETUP clean setup run
+
+If one of the tests fails, then $subdir/test.log contains the log file of
+the test.
+
+To run just one of the cases:
+
+$ sudo make -C test/TEST-01-BASIC clean setup run
+
+Specifying the build directory
+==============================
+
+If the build directory is not detected automatically, it can be specified
+with BUILD_DIR=:
+
+$ sudo BUILD_DIR=some-other-build/ test/run-integration-tests
+
+or
+
+$ sudo make -C test/TEST-01-BASIC BUILD_DIR=../../some-other-build/ ...
+
+Note that in the second case, the path is relative to the test case directory.
+An absolute path may also be used in both cases.
+
+Testing installed binaries instead of built
+===========================================
+
+To run the extended testsuite using the systemd installed on the system instead
+of the systemd from a build, use the NO_BUILD=1:
+
+$ sudo NO_BUILD=1 test/run-integration-tests
+
+Configuration variables
+=======================
+
+TEST_NO_QEMU=1
+ Don't run tests under qemu
+
+TEST_QEMU_ONLY=1
+ Run only tests that require qemu
+
+TEST_NO_NSPAWN=1
+ Don't run tests under systemd-nspawn
+
+TEST_PREFER_NSPAWN=1
+ Run all tests that do not require qemu under systemd-nspawn
+
+TEST_NO_KVM=1
+ Disable qemu KVM auto-detection (may be necessary when you're trying to run the
+ *vanilla* qemu and have both qemu and qemu-kvm installed)
+
+TEST_NESTED_KVM=1
+ Allow tests to run with nested KVM. By default, the testsuite disables
+ nested KVM if the host machine already runs under KVM. Setting this
+ variable disables such checks
+
+QEMU_MEM=512M
+ Configure amount of memory for qemu VMs (defaults to 512M)
+
+QEMU_SMP=1
+ Configure number of CPUs for qemu VMs (defaults to 1)
+
+KERNEL_APPEND='...'
+ Append additional parameters to the kernel command line
+
+NSPAWN_ARGUMENTS='...'
+ Specify additional arguments for systemd-nspawn
+
+QEMU_TIMEOUT=infinity
+ Set a timeout for tests under qemu (defaults to infinity)
+
+NSPAWN_TIMEOUT=infinity
+ Set a timeout for tests under systemd-nspawn (defaults to infinity)
+
+INTERACTIVE_DEBUG=1
+ Configure the machine to be more *user-friendly* for interactive debuggung
+ (e.g. by setting a usable default terminal, suppressing the shutdown after
+ the test, etc.)
+
+The kernel and initrd can be specified with $KERNEL_BIN and $INITRD. (Fedora's
+or Debian's default kernel path and initrd are used by default.)
+
+A script will try to find your qemu binary. If you want to specify a different
+one with $QEMU_BIN.
+
+Debugging the qemu image
+========================
+
+If you want to log in the testsuite virtual machine, use INTERACTIVE_DEBUG=1
+and log in as root:
+
+$ sudo make -C test/TEST-01-BASIC INTERACTIVE_DEBUG=1 run
+
+The root password is empty.
+
+Ubuntu CI
+=========
+
+New PR submitted to the project are run through regression tests, and one set
+of those is the 'autopkgtest' runs for several different architectures, called
+'Ubuntu CI'. Part of that testing is to run all these tests. Sometimes these
+tests are temporarily deny-listed from running in the 'autopkgtest' tests while
+debugging a flaky test; that is done by creating a file in the test directory
+named 'deny-list-ubuntu-ci', for example to prevent the TEST-01-BASIC test from
+running in the 'autopkgtest' runs, create the file
+'TEST-01-BASIC/deny-list-ubuntu-ci'.
+
+The tests may be disabled only for specific archs, by creating a deny-list file
+with the arch name at the end, e.g.
+'TEST-01-BASIC/deny-list-ubuntu-ci-arm64' to disable the TEST-01-BASIC test
+only on test runs for the 'arm64' architecture.
+
+Note the arch naming is not from 'uname -m', it is Debian arch names:
+https://wiki.debian.org/ArchitectureSpecificsMemo
+
+For PRs that fix a currently deny-listed test, the PR should include removal
+of the deny-list file.
+
+In case a test fails, the full set of artifacts, including the journal of the
+failed run, can be downloaded from the artifacts.tar.gz archive which will be
+reachable in the same URL parent directory as the logs.gz that gets linked on
+the Github CI status.
+
+To add new dependencies or new binaries to the packages used during the tests,
+a merge request can be sent to: https://salsa.debian.org/systemd-team/systemd
+targeting the 'upstream-ci' branch.
+
+The cloud-side infrastructure, that is hooked into the Github interface, is
+located at:
+
+https://git.launchpad.net/autopkgtest-cloud/
+
+In case of infrastructure issues with this CI, things might go wrong in two
+places:
+
+- starting a job: this is done via a Github webhook, so check if the HTTP POST
+ are failing on https://github.com/systemd/systemd/settings/hooks
+- running a job: all currently running jobs are listed at
+ https://autopkgtest.ubuntu.com/running#pkg-systemd-upstream in case the PR
+ does not show the status for some reason
+- reporting the job result: this is done on Canonical's cloud infrastructure,
+ if jobs are started and running but no status is visible on the PR, then it is
+ likely that reporting back is not working
+
+For infrastructure help, reaching out to Canonical via the #ubuntu-devel channel
+on libera.chat is an effective way to receive support in general.
+
+Manually running a part of the Ubuntu CI test suite
+===================================================
+
+In some situations one may want/need to run one of the tests run by Ubuntu CI
+locally for debugging purposes. For this, you need a machine (or a VM) with
+the same Ubuntu release as is used by Ubuntu CI (Focal ATTOW).
+
+First of all, clone the Debian systemd repository and sync it with the code of
+the PR (set by the $UPSTREAM_PULL_REQUEST env variable) you'd like to debug:
+
+# git clone https://salsa.debian.org/systemd-team/systemd.git
+# cd systemd
+# git checkout upstream-ci
+# TEST_UPSTREAM=1 UPSTREAM_PULL_REQUEST=12345 ./debian/extra/checkout-upstream
+
+Now install necessary build & test dependencies:
+
+## PPA with some newer Ubuntu packages required by upstream systemd
+# add-apt-repository -y ppa:upstream-systemd-ci/systemd-ci
+# apt build-dep -y systemd
+# apt install -y autopkgtest debhelper genisoimage git qemu-system-x86 \
+ libzstd-dev libfdisk-dev libtss2-dev libfido2-dev libssl-dev \
+ python3-jinja2 zstd
+
+Build systemd deb packages with debug info:
+
+# DEB_BUILD_OPTIONS="nocheck nostrip" dpkg-buildpackage -us -uc
+# cd ..
+
+Prepare a testbed image for autopkgtest (tweak the release as necessary):
+
+# autopkgtest-buildvm-ubuntu-cloud -v -a amd64 -r focal
+
+And finally run the autopkgtest itself:
+
+# autopkgtest -o logs *.deb systemd/ \
+ --timeout-factor=3 \
+ --test-name=boot-and-services \
+ --shell-fail \
+ -- autopkgtest-virt-qemu autopkgtest-focal-amd64.img
+
+where --test-name= is the name of the test you want to run/debug. The
+--shell-fail option will pause the execution in case the test fails and shows
+you the information how to connect to the testbed for further debugging.
+
+Manually running CodeQL analysis
+=====================================
+
+This is mostly useful for debugging various CodeQL quirks.
+
+Download the CodeQL Bundle from https://github.com/github/codeql-action/releases
+and unpack it somewhere. From now the 'tutorial' assumes you have the `codeql`
+binary from the unpacked archive in $PATH for brevity.
+
+Switch to the systemd repository if not already:
+
+$ cd <systemd-repo>
+
+Create an initial CodeQL database:
+
+$ CCACHE_DISABLE=1 codeql database create codeqldb --language=cpp -vvv
+
+Disabling ccache is important, otherwise you might see CodeQL complaining:
+
+No source code was seen and extracted to /home/mrc0mmand/repos/@ci-incubator/systemd/codeqldb.
+This can occur if the specified build commands failed to compile or process any code.
+ - Confirm that there is some source code for the specified language in the project.
+ - For codebases written in Go, JavaScript, TypeScript, and Python, do not specify
+ an explicit --command.
+ - For other languages, the --command must specify a "clean" build which compiles
+ all the source code files without reusing existing build artefacts.
+
+If you want to run all queries systemd uses in CodeQL, run:
+
+$ codeql database analyze codeqldb/ --format csv --output results.csv .github/codeql-custom.qls .github/codeql-queries/*.ql -vvv
+
+Note: this will take a while.
+
+If you're interested in a specific check, the easiest way (without hunting down
+the specific CodeQL query file) is to create a custom query suite. For example:
+
+$ cat >test.qls <<EOF
+- queries: .
+ from: codeql/cpp-queries
+- include:
+ id:
+ - cpp/missing-return
+EOF
+
+And then execute it in the same way as above:
+
+$ codeql database analyze codeqldb/ --format csv --output results.csv test.qls -vvv
+
+More about query suites here: https://codeql.github.com/docs/codeql-cli/creating-codeql-query-suites/
+
+The results are then located in the `results.csv` file as a comma separated
+values list (obviously), which is the most human-friendly output format the
+CodeQL utility provides (so far).