From b750101eb236130cf056c675997decbac904cc49 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 17:35:18 +0200 Subject: Adding upstream version 252.22. Signed-off-by: Daniel Baumann --- man/resolved.conf.xml | 352 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 352 insertions(+) create mode 100644 man/resolved.conf.xml (limited to 'man/resolved.conf.xml') diff --git a/man/resolved.conf.xml b/man/resolved.conf.xml new file mode 100644 index 0000000..2b9f482 --- /dev/null +++ b/man/resolved.conf.xml @@ -0,0 +1,352 @@ + + +%entities; +]> + + + + + resolved.conf + systemd + + + + resolved.conf + 5 + + + + resolved.conf + resolved.conf.d + Network Name Resolution configuration files + + + + /etc/systemd/resolved.conf + /etc/systemd/resolved.conf.d/*.conf + /run/systemd/resolved.conf.d/*.conf + /usr/lib/systemd/resolved.conf.d/*.conf + + + + Description + + These configuration files control local DNS and LLMNR + name resolution. + + + + + + + Options + + The following options are available in the [Resolve] section: + + + + + DNS= + A space-separated list of IPv4 and IPv6 addresses to use as system DNS servers. Each address can + optionally take a port number separated with :, a network interface name or index separated with + %, and a Server Name Indication (SNI) separated with #. When IPv6 address is + specified with a port number, then the address must be in the square brackets. That is, the acceptable full formats + are 111.222.333.444:9953%ifname#example.com for IPv4 and + [1111:2222::3333]:9953%ifname#example.com for IPv6. DNS requests are sent to one of the listed + DNS servers in parallel to suitable per-link DNS servers acquired from + systemd-networkd.service8 or + set at runtime by external applications. For compatibility reasons, if this setting is not specified, the DNS + servers listed in /etc/resolv.conf are used instead, if that file exists and any servers + are configured in it. This setting defaults to the empty list. + + + + FallbackDNS= + A space-separated list of IPv4 and IPv6 addresses to use as the fallback DNS servers. Please see + DNS= for acceptable format of addresses. Any per-link DNS servers obtained from + systemd-networkd.service8 + take precedence over this setting, as do any servers set via DNS= above or + /etc/resolv.conf. This setting is hence only used if no other DNS server information is + known. If this option is not given, a compiled-in list of DNS servers is used instead. + + + + Domains= + A space-separated list of domains, optionally prefixed with ~, + used for two distinct purposes described below. Defaults to the empty list. + + Any domains not prefixed with ~ are used as search + suffixes when resolving single-label hostnames (domain names which contain no dot), in order to + qualify them into fully-qualified domain names (FQDNs). These "search domains" are strictly processed + in the order they are specified in, until the name with the suffix appended is found. For + compatibility reasons, if this setting is not specified, the search domains listed in + /etc/resolv.conf with the search keyword are used instead, if + that file exists and any domains are configured in it. + + The domains prefixed with ~ are called "route-only domains". All domains + listed here (both search domains and route-only domains after removing the + ~ prefix) define a search path that preferably directs DNS queries to this + interface. This search path has an effect only when suitable per-link DNS servers are known. Such + servers may be defined through the DNS= setting (see above) and dynamically at run + time, for example from DHCP leases. If no per-link DNS servers are known, route-only domains have no + effect. + + Use the construct ~. (which is composed from ~ to + indicate a route-only domain and . to indicate the DNS root domain that is the + implied suffix of all DNS domains) to use the DNS servers defined for this link preferably for all + domains. + + See "Protocols and Routing" in + systemd-resolved.service8 + for details of how search and route-only domains are used. + + + + + LLMNR= + Takes a boolean argument or + resolve. Controls Link-Local Multicast Name + Resolution support (RFC 4795) on + the local host. If true, enables full LLMNR responder and + resolver support. If false, disables both. If set to + resolve, only resolution support is enabled, + but responding is disabled. Note that + systemd-networkd.service8 + also maintains per-link LLMNR settings. LLMNR will be + enabled on a link only if the per-link and the + global setting is on. + + + + MulticastDNS= + Takes a boolean argument or + resolve. Controls Multicast DNS support (RFC 6762) on + the local host. If true, enables full Multicast DNS responder and + resolver support. If false, disables both. If set to + resolve, only resolution support is enabled, + but responding is disabled. Note that + systemd-networkd.service8 + also maintains per-link Multicast DNS settings. Multicast DNS will be + enabled on a link only if the per-link and the + global setting is on. + + + + DNSSEC= + Takes a boolean argument or + allow-downgrade. If true all DNS lookups are + DNSSEC-validated locally (excluding LLMNR and Multicast + DNS). If the response to a lookup request is detected to be invalid + a lookup failure is returned to applications. Note that + this mode requires a DNS server that supports DNSSEC. If the + DNS server does not properly support DNSSEC all validations + will fail. If set to allow-downgrade DNSSEC + validation is attempted, but if the server does not support + DNSSEC properly, DNSSEC mode is automatically disabled. Note + that this mode makes DNSSEC validation vulnerable to + "downgrade" attacks, where an attacker might be able to + trigger a downgrade to non-DNSSEC mode by synthesizing a DNS + response that suggests DNSSEC was not supported. If set to + false, DNS lookups are not DNSSEC validated. + + Note that DNSSEC validation requires retrieval of + additional DNS data, and thus results in a small DNS look-up + time penalty. + + DNSSEC requires knowledge of "trust anchors" to prove + data integrity. The trust anchor for the Internet root domain + is built into the resolver, additional trust anchors may be + defined with + dnssec-trust-anchors.d5. + Trust anchors may change at regular intervals, and old trust + anchors may be revoked. In such a case DNSSEC validation is + not possible until new trust anchors are configured locally or + the resolver software package is updated with the new root + trust anchor. In effect, when the built-in trust anchor is + revoked and DNSSEC= is true, all further + lookups will fail, as it cannot be proved anymore whether + lookups are correctly signed, or validly unsigned. If + DNSSEC= is set to + allow-downgrade the resolver will + automatically turn off DNSSEC validation in such a case. + + Client programs looking up DNS data will be informed + whether lookups could be verified using DNSSEC, or whether the + returned data could not be verified (either because the data + was found unsigned in the DNS, or the DNS server did not + support DNSSEC or no appropriate trust anchors were known). In + the latter case it is assumed that client programs employ a + secondary scheme to validate the returned DNS data, should + this be required. + + It is recommended to set DNSSEC= to + true on systems where it is known that the DNS server supports + DNSSEC correctly, and where software or trust anchor updates + happen regularly. On other systems it is recommended to set + DNSSEC= to + allow-downgrade. + + In addition to this global DNSSEC setting + systemd-networkd.service8 + also maintains per-link DNSSEC settings. For system DNS + servers (see above), only the global DNSSEC setting is in + effect. For per-link DNS servers the per-link + setting is in effect, unless it is unset in which case the + global setting is used instead. + + Site-private DNS zones generally conflict with DNSSEC + operation, unless a negative (if the private zone is not + signed) or positive (if the private zone is signed) trust + anchor is configured for them. If + allow-downgrade mode is selected, it is + attempted to detect site-private DNS zones using top-level + domains (TLDs) that are not known by the DNS root server. This + logic does not work in all private zone setups. + + Defaults to &DEFAULT_DNSSEC_MODE;. + + + + + DNSOverTLS= + + Takes a boolean argument or opportunistic. If + true all connections to the server will be encrypted. Note that this + mode requires a DNS server that supports DNS-over-TLS and has a valid + certificate. If the hostname was specified in DNS= + by using the format address#server_name it + is used to validate its certificate and also to enable Server Name + Indication (SNI) when opening a TLS connection. Otherwise + the certificate is checked against the server's IP. + If the DNS server does not support DNS-over-TLS all DNS requests will fail. + + When set to opportunistic + DNS request are attempted to send encrypted with DNS-over-TLS. + If the DNS server does not support TLS, DNS-over-TLS is disabled. + Note that this mode makes DNS-over-TLS vulnerable to "downgrade" + attacks, where an attacker might be able to trigger a downgrade + to non-encrypted mode by synthesizing a response that suggests + DNS-over-TLS was not supported. If set to false, DNS lookups + are send over UDP. + + Note that DNS-over-TLS requires additional data to be + send for setting up an encrypted connection, and thus results + in a small DNS look-up time penalty. + + Note that in opportunistic mode the + resolver is not capable of authenticating the server, so it is + vulnerable to "man-in-the-middle" attacks. + + In addition to this global DNSOverTLS= setting + systemd-networkd.service8 + also maintains per-link DNSOverTLS= settings. For system DNS servers (see above), only the global + DNSOverTLS= setting is in effect. For per-link DNS servers the per-link setting is in effect, unless + it is unset in which case the global setting is used instead. + + Defaults to &DEFAULT_DNS_OVER_TLS_MODE;. + + + + + Cache= + Takes a boolean or no-negative as argument. If + yes (the default), resolving a domain name which already got queried earlier will + return the previous result as long as it is still valid, and thus does not result in a new network + request. Be aware that turning off caching comes at a performance penalty, which is particularly high + when DNSSEC is used. If no-negative, only positive answers are cached. + + Note that caching is turned off by default for host-local DNS servers. + See CacheFromLocalhost= for details. + + + + CacheFromLocalhost= + Takes a boolean as argument. If no (the default), and response cames from + host-local IP address (such as 127.0.0.1 or ::1), the result wouldn't be cached in order to avoid + potential duplicate local caching. + + + + + DNSStubListener= + Takes a boolean argument or one of udp and + tcp. If udp, a DNS stub resolver will listen for UDP requests + on addresses 127.0.0.53 and 127.0.0.54, port 53. If tcp, the stub will listen for + TCP requests on the same addresses and port. If yes (the default), the stub listens + for both UDP and TCP requests. If no, the stub listener is disabled. + + + + Note that the DNS stub listener is turned off implicitly when its listening address and port are already + in use. + + + + DNSStubListenerExtra= + Takes an IPv4 or IPv6 address to listen on. The address may be optionally + prefixed with a protocol name (udp or tcp) separated with + :. If the protocol is not specified, the service will listen on both UDP and + TCP. It may be also optionally suffixed by a numeric port number with separator + :. When an IPv6 address is specified with a port number, then the address + must be in the square brackets. If the port is not specified, then the service uses port 53. + Note that this is independent of the primary DNS stub configured with + DNSStubListener=, and only configures additional + sockets to listen on. This option can be specified multiple times. If an empty string is + assigned, then the all previous assignments are cleared. Defaults to unset. + + Examples: + DNSStubListenerExtra=192.168.10.10 +DNSStubListenerExtra=2001:db8:0:f102::10 +DNSStubListenerExtra=192.168.10.11:9953 +DNSStubListenerExtra=[2001:db8:0:f102::11]:9953 +DNSStubListenerExtra=tcp:192.168.10.12 +DNSStubListenerExtra=udp:2001:db8:0:f102::12 +DNSStubListenerExtra=tcp:192.168.10.13:9953 +DNSStubListenerExtra=udp:[2001:db8:0:f102::13]:9953 + + + + + ReadEtcHosts= + Takes a boolean argument. If yes (the default), + systemd-resolved will read /etc/hosts, and try to resolve + hosts or address by using the entries in the file before sending query to DNS servers. + + + + + ResolveUnicastSingleLabel= + Takes a boolean argument. When false (the default), + systemd-resolved will not resolve A and AAAA queries for single-label names over + classic DNS. Note that such names may still be resolved if search domains are specified (see + Domains= above), or using other mechanisms, in particular via LLMNR or from + /etc/hosts. When true, queries for single-label names will be forwarded to + global DNS servers even if no search domains are defined. + + + This option is provided for compatibility with configurations where public DNS + servers are not used. Forwarding single-label names to servers not under your control is + not standard-conformant, see IAB + Statement, and may create a privacy and security risk. + + + + + + See Also + + systemd1, + systemd-resolved.service8, + systemd-networkd.service8, + dnssec-trust-anchors.d5, + resolv.conf5 + + + + -- cgit v1.2.3