From b750101eb236130cf056c675997decbac904cc49 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 17:35:18 +0200 Subject: Adding upstream version 252.22. Signed-off-by: Daniel Baumann --- src/shared/data-fd-util.c | 345 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 345 insertions(+) create mode 100644 src/shared/data-fd-util.c (limited to 'src/shared/data-fd-util.c') diff --git a/src/shared/data-fd-util.c b/src/shared/data-fd-util.c new file mode 100644 index 0000000..b6eb3d9 --- /dev/null +++ b/src/shared/data-fd-util.c @@ -0,0 +1,345 @@ +/* SPDX-License-Identifier: LGPL-2.1-or-later */ + +#include +#include +#include +#include + +#include "alloc-util.h" +#include "copy.h" +#include "data-fd-util.h" +#include "fd-util.h" +#include "fs-util.h" +#include "io-util.h" +#include "memfd-util.h" +#include "tmpfile-util.h" + +/* When the data is smaller or equal to 64K, try to place the copy in a memfd/pipe */ +#define DATA_FD_MEMORY_LIMIT (64U*1024U) + +/* If memfd/pipe didn't work out, then let's use a file in /tmp up to a size of 1M. If it's large than that use /var/tmp instead. */ +#define DATA_FD_TMP_LIMIT (1024U*1024U) + +int acquire_data_fd(const void *data, size_t size, unsigned flags) { + _cleanup_close_pair_ int pipefds[2] = { -1, -1 }; + char pattern[] = "/dev/shm/data-fd-XXXXXX"; + _cleanup_close_ int fd = -1; + int isz = 0, r; + ssize_t n; + off_t f; + + assert(data || size == 0); + + /* Acquire a read-only file descriptor that when read from returns the specified data. This is much more + * complex than I wish it was. But here's why: + * + * a) First we try to use memfds. They are the best option, as we can seal them nicely to make them + * read-only. Unfortunately they require kernel 3.17, and – at the time of writing – we still support 3.14. + * + * b) Then, we try classic pipes. They are the second best options, as we can close the writing side, retaining + * a nicely read-only fd in the reading side. However, they are by default quite small, and unprivileged + * clients can only bump their size to a system-wide limit, which might be quite low. + * + * c) Then, we try an O_TMPFILE file in /dev/shm (that dir is the only suitable one known to exist from + * earliest boot on). To make it read-only we open the fd a second time with O_RDONLY via + * /proc/self/. Unfortunately O_TMPFILE is not available on older kernels on tmpfs. + * + * d) Finally, we try creating a regular file in /dev/shm, which we then delete. + * + * It sucks a bit that depending on the situation we return very different objects here, but that's Linux I + * figure. */ + + if (size == 0 && ((flags & ACQUIRE_NO_DEV_NULL) == 0)) + /* As a special case, return /dev/null if we have been called for an empty data block */ + return RET_NERRNO(open("/dev/null", O_RDONLY|O_CLOEXEC|O_NOCTTY)); + + if ((flags & ACQUIRE_NO_MEMFD) == 0) { + fd = memfd_new("data-fd"); + if (fd < 0) + goto try_pipe; + + n = write(fd, data, size); + if (n < 0) + return -errno; + if ((size_t) n != size) + return -EIO; + + f = lseek(fd, 0, SEEK_SET); + if (f != 0) + return -errno; + + r = memfd_set_sealed(fd); + if (r < 0) + return r; + + return TAKE_FD(fd); + } + +try_pipe: + if ((flags & ACQUIRE_NO_PIPE) == 0) { + if (pipe2(pipefds, O_CLOEXEC|O_NONBLOCK) < 0) + return -errno; + + isz = fcntl(pipefds[1], F_GETPIPE_SZ, 0); + if (isz < 0) + return -errno; + + if ((size_t) isz < size) { + isz = (int) size; + if (isz < 0 || (size_t) isz != size) + return -E2BIG; + + /* Try to bump the pipe size */ + (void) fcntl(pipefds[1], F_SETPIPE_SZ, isz); + + /* See if that worked */ + isz = fcntl(pipefds[1], F_GETPIPE_SZ, 0); + if (isz < 0) + return -errno; + + if ((size_t) isz < size) + goto try_dev_shm; + } + + n = write(pipefds[1], data, size); + if (n < 0) + return -errno; + if ((size_t) n != size) + return -EIO; + + (void) fd_nonblock(pipefds[0], false); + + return TAKE_FD(pipefds[0]); + } + +try_dev_shm: + if ((flags & ACQUIRE_NO_TMPFILE) == 0) { + fd = open("/dev/shm", O_RDWR|O_TMPFILE|O_CLOEXEC, 0500); + if (fd < 0) + goto try_dev_shm_without_o_tmpfile; + + n = write(fd, data, size); + if (n < 0) + return -errno; + if ((size_t) n != size) + return -EIO; + + /* Let's reopen the thing, in order to get an O_RDONLY fd for the original O_RDWR one */ + return fd_reopen(fd, O_RDONLY|O_CLOEXEC); + } + +try_dev_shm_without_o_tmpfile: + if ((flags & ACQUIRE_NO_REGULAR) == 0) { + fd = mkostemp_safe(pattern); + if (fd < 0) + return fd; + + n = write(fd, data, size); + if (n < 0) { + r = -errno; + goto unlink_and_return; + } + if ((size_t) n != size) { + r = -EIO; + goto unlink_and_return; + } + + /* Let's reopen the thing, in order to get an O_RDONLY fd for the original O_RDWR one */ + r = open(pattern, O_RDONLY|O_CLOEXEC); + if (r < 0) + r = -errno; + + unlink_and_return: + (void) unlink(pattern); + return r; + } + + return -EOPNOTSUPP; +} + +int copy_data_fd(int fd) { + _cleanup_close_ int copy_fd = -1, tmp_fd = -1; + _cleanup_free_ void *remains = NULL; + size_t remains_size = 0; + const char *td; + struct stat st; + int r; + + /* Creates a 'data' fd from the specified source fd, containing all the same data in a read-only fashion, but + * independent of it (i.e. the source fd can be closed and unmounted after this call succeeded). Tries to be + * somewhat smart about where to place the data. In the best case uses a memfd(). If memfd() are not supported + * uses a pipe instead. For larger data will use an unlinked file in /tmp, and for even larger data one in + * /var/tmp. */ + + if (fstat(fd, &st) < 0) + return -errno; + + /* For now, let's only accept regular files, sockets, pipes and char devices */ + if (S_ISDIR(st.st_mode)) + return -EISDIR; + if (S_ISLNK(st.st_mode)) + return -ELOOP; + if (!S_ISREG(st.st_mode) && !S_ISSOCK(st.st_mode) && !S_ISFIFO(st.st_mode) && !S_ISCHR(st.st_mode)) + return -EBADFD; + + /* If we have reason to believe the data is bounded in size, then let's use memfds or pipes as backing fd. Note + * that we use the reported regular file size only as a hint, given that there are plenty special files in + * /proc and /sys which report a zero file size but can be read from. */ + + if (!S_ISREG(st.st_mode) || st.st_size < DATA_FD_MEMORY_LIMIT) { + + /* Try a memfd first */ + copy_fd = memfd_new("data-fd"); + if (copy_fd >= 0) { + off_t f; + + r = copy_bytes(fd, copy_fd, DATA_FD_MEMORY_LIMIT, 0); + if (r < 0) + return r; + + f = lseek(copy_fd, 0, SEEK_SET); + if (f != 0) + return -errno; + + if (r == 0) { + /* Did it fit into the limit? If so, we are done. */ + r = memfd_set_sealed(copy_fd); + if (r < 0) + return r; + + return TAKE_FD(copy_fd); + } + + /* Hmm, pity, this didn't fit. Let's fall back to /tmp then, see below */ + + } else { + _cleanup_(close_pairp) int pipefds[2] = { -1, -1 }; + int isz; + + /* If memfds aren't available, use a pipe. Set O_NONBLOCK so that we will get EAGAIN rather + * then block indefinitely when we hit the pipe size limit */ + + if (pipe2(pipefds, O_CLOEXEC|O_NONBLOCK) < 0) + return -errno; + + isz = fcntl(pipefds[1], F_GETPIPE_SZ, 0); + if (isz < 0) + return -errno; + + /* Try to enlarge the pipe size if necessary */ + if ((size_t) isz < DATA_FD_MEMORY_LIMIT) { + + (void) fcntl(pipefds[1], F_SETPIPE_SZ, DATA_FD_MEMORY_LIMIT); + + isz = fcntl(pipefds[1], F_GETPIPE_SZ, 0); + if (isz < 0) + return -errno; + } + + if ((size_t) isz >= DATA_FD_MEMORY_LIMIT) { + + r = copy_bytes_full(fd, pipefds[1], DATA_FD_MEMORY_LIMIT, 0, &remains, &remains_size, NULL, NULL); + if (r < 0 && r != -EAGAIN) + return r; /* If we get EAGAIN it could be because of the source or because of + * the destination fd, we can't know, as sendfile() and friends won't + * tell us. Hence, treat this as reason to fall back, just to be + * sure. */ + if (r == 0) { + /* Everything fit in, yay! */ + (void) fd_nonblock(pipefds[0], false); + + return TAKE_FD(pipefds[0]); + } + + /* Things didn't fit in. But we read data into the pipe, let's remember that, so that + * when writing the new file we incorporate this first. */ + copy_fd = TAKE_FD(pipefds[0]); + } + } + } + + /* If we have reason to believe this will fit fine in /tmp, then use that as first fallback. */ + if ((!S_ISREG(st.st_mode) || st.st_size < DATA_FD_TMP_LIMIT) && + (DATA_FD_MEMORY_LIMIT + remains_size) < DATA_FD_TMP_LIMIT) { + off_t f; + + tmp_fd = open_tmpfile_unlinkable(NULL /* NULL as directory means /tmp */, O_RDWR|O_CLOEXEC); + if (tmp_fd < 0) + return tmp_fd; + + if (copy_fd >= 0) { + /* If we tried a memfd/pipe first and it ended up being too large, then copy this into the + * temporary file first. */ + + r = copy_bytes(copy_fd, tmp_fd, UINT64_MAX, 0); + if (r < 0) + return r; + + assert(r == 0); + } + + if (remains_size > 0) { + /* If there were remaining bytes (i.e. read into memory, but not written out yet) from the + * failed copy operation, let's flush them out next. */ + + r = loop_write(tmp_fd, remains, remains_size, false); + if (r < 0) + return r; + } + + r = copy_bytes(fd, tmp_fd, DATA_FD_TMP_LIMIT - DATA_FD_MEMORY_LIMIT - remains_size, COPY_REFLINK); + if (r < 0) + return r; + if (r == 0) + goto finish; /* Yay, it fit in */ + + /* It didn't fit in. Let's not forget to use what we already used */ + f = lseek(tmp_fd, 0, SEEK_SET); + if (f != 0) + return -errno; + + close_and_replace(copy_fd, tmp_fd); + + remains = mfree(remains); + remains_size = 0; + } + + /* As last fallback use /var/tmp */ + r = var_tmp_dir(&td); + if (r < 0) + return r; + + tmp_fd = open_tmpfile_unlinkable(td, O_RDWR|O_CLOEXEC); + if (tmp_fd < 0) + return tmp_fd; + + if (copy_fd >= 0) { + /* If we tried a memfd/pipe first, or a file in /tmp, and it ended up being too large, than copy this + * into the temporary file first. */ + r = copy_bytes(copy_fd, tmp_fd, UINT64_MAX, COPY_REFLINK); + if (r < 0) + return r; + + assert(r == 0); + } + + if (remains_size > 0) { + /* Then, copy in any read but not yet written bytes. */ + r = loop_write(tmp_fd, remains, remains_size, false); + if (r < 0) + return r; + } + + /* Copy in the rest */ + r = copy_bytes(fd, tmp_fd, UINT64_MAX, COPY_REFLINK); + if (r < 0) + return r; + + assert(r == 0); + +finish: + /* Now convert the O_RDWR file descriptor into an O_RDONLY one (and as side effect seek to the beginning of the + * file again */ + + return fd_reopen(tmp_fd, O_RDONLY|O_CLOEXEC); +} -- cgit v1.2.3