Adding upstream version 1:115.7.0.upstream/1%115.7.0upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 365 insertions, 0 deletions

diff --git a/storage/mozStorageSQLFunctions.cpp b/storage/mozStorageSQLFunctions.cpp
new file mode 100644
index 0000000000..d160ddb18b
--- /dev/null
+++ b/storage/mozStorageSQLFunctions.cpp
@@ -0,0 +1,365 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
+ * vim: sw=2 ts=2 et lcs=trail\:.,tab\:>~ :
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/. */
+
+#include "mozilla/ArrayUtils.h"
+
+#include "mozStorageSQLFunctions.h"
+#include "nsTArray.h"
+#include "nsUnicharUtils.h"
+#include <algorithm>
+
+namespace mozilla {
+namespace storage {
+
+////////////////////////////////////////////////////////////////////////////////
+//// Local Helper Functions
+
+namespace {
+
+/**
+ * Performs the LIKE comparison of a string against a pattern.  For more detail
+ * see http://www.sqlite.org/lang_expr.html#like.
+ *
+ * @param aPatternItr
+ *        An iterator at the start of the pattern to check for.
+ * @param aPatternEnd
+ *        An iterator at the end of the pattern to check for.
+ * @param aStringItr
+ *        An iterator at the start of the string to check for the pattern.
+ * @param aStringEnd
+ *        An iterator at the end of the string to check for the pattern.
+ * @param aEscapeChar
+ *        The character to use for escaping symbols in the pattern.
+ * @return 1 if the pattern is found, 0 otherwise.
+ */
+int likeCompare(nsAString::const_iterator aPatternItr,
+                nsAString::const_iterator aPatternEnd,
+                nsAString::const_iterator aStringItr,
+                nsAString::const_iterator aStringEnd, char16_t aEscapeChar) {
+  const char16_t MATCH_ALL('%');
+  const char16_t MATCH_ONE('_');
+
+  bool lastWasEscape = false;
+  while (aPatternItr != aPatternEnd) {
+    /**
+     * What we do in here is take a look at each character from the input
+     * pattern, and do something with it.  There are 4 possibilities:
+     * 1) character is an un-escaped match-all character
+     * 2) character is an un-escaped match-one character
+     * 3) character is an un-escaped escape character
+     * 4) character is not any of the above
+     */
+    if (!lastWasEscape && *aPatternItr == MATCH_ALL) {
+      // CASE 1
+      /**
+       * Now we need to skip any MATCH_ALL or MATCH_ONE characters that follow a
+       * MATCH_ALL character.  For each MATCH_ONE character, skip one character
+       * in the pattern string.
+       */
+      while (*aPatternItr == MATCH_ALL || *aPatternItr == MATCH_ONE) {
+        if (*aPatternItr == MATCH_ONE) {
+          // If we've hit the end of the string we are testing, no match
+          if (aStringItr == aStringEnd) return 0;
+          aStringItr++;
+        }
+        aPatternItr++;
+      }
+
+      // If we've hit the end of the pattern string, match
+      if (aPatternItr == aPatternEnd) return 1;
+
+      while (aStringItr != aStringEnd) {
+        if (likeCompare(aPatternItr, aPatternEnd, aStringItr, aStringEnd,
+                        aEscapeChar)) {
+          // we've hit a match, so indicate this
+          return 1;
+        }
+        aStringItr++;
+      }
+
+      // No match
+      return 0;
+    } else if (!lastWasEscape && *aPatternItr == MATCH_ONE) {
+      // CASE 2
+      if (aStringItr == aStringEnd) {
+        // If we've hit the end of the string we are testing, no match
+        return 0;
+      }
+      aStringItr++;
+      lastWasEscape = false;
+    } else if (!lastWasEscape && *aPatternItr == aEscapeChar) {
+      // CASE 3
+      lastWasEscape = true;
+    } else {
+      // CASE 4
+      if (::ToUpperCase(*aStringItr) != ::ToUpperCase(*aPatternItr)) {
+        // If we've hit a point where the strings don't match, there is no match
+        return 0;
+      }
+      aStringItr++;
+      lastWasEscape = false;
+    }
+
+    aPatternItr++;
+  }
+
+  return aStringItr == aStringEnd;
+}
+
+/**
+ * Compute the Levenshtein Edit Distance between two strings.
+ *
+ * @param aStringS
+ *        a string
+ * @param aStringT
+ *        another string
+ * @param _result
+ *        an outparam that will receive the edit distance between the arguments
+ * @return a Sqlite result code, e.g. SQLITE_OK, SQLITE_NOMEM, etc.
+ */
+int levenshteinDistance(const nsAString& aStringS, const nsAString& aStringT,
+                        int* _result) {
+  // Set the result to a non-sensical value in case we encounter an error.
+  *_result = -1;
+
+  const uint32_t sLen = aStringS.Length();
+  const uint32_t tLen = aStringT.Length();
+
+  if (sLen == 0) {
+    *_result = tLen;
+    return SQLITE_OK;
+  }
+  if (tLen == 0) {
+    *_result = sLen;
+    return SQLITE_OK;
+  }
+
+  // Notionally, Levenshtein Distance is computed in a matrix.  If we
+  // assume s = "span" and t = "spam", the matrix would look like this:
+  //    s -->
+  //  t          s   p   a   n
+  //  |      0   1   2   3   4
+  //  V  s   1   *   *   *   *
+  //     p   2   *   *   *   *
+  //     a   3   *   *   *   *
+  //     m   4   *   *   *   *
+  //
+  // Note that the row width is sLen + 1 and the column height is tLen + 1,
+  // where sLen is the length of the string "s" and tLen is the length of "t".
+  // The first row and the first column are initialized as shown, and
+  // the algorithm computes the remaining cells row-by-row, and
+  // left-to-right within each row.  The computation only requires that
+  // we be able to see the current row and the previous one.
+
+  // Allocate memory for two rows.
+  AutoTArray<int, nsAutoString::kStorageSize> row1;
+  AutoTArray<int, nsAutoString::kStorageSize> row2;
+
+  // Declare the raw pointers that will actually be used to access the memory.
+  int* prevRow = row1.AppendElements(sLen + 1);
+  int* currRow = row2.AppendElements(sLen + 1);
+
+  // Initialize the first row.
+  for (uint32_t i = 0; i <= sLen; i++) prevRow[i] = i;
+
+  const char16_t* s = aStringS.BeginReading();
+  const char16_t* t = aStringT.BeginReading();
+
+  // Compute the empty cells in the "matrix" row-by-row, starting with
+  // the second row.
+  for (uint32_t ti = 1; ti <= tLen; ti++) {
+    // Initialize the first cell in this row.
+    currRow[0] = ti;
+
+    // Get the character from "t" that corresponds to this row.
+    const char16_t tch = t[ti - 1];
+
+    // Compute the remaining cells in this row, left-to-right,
+    // starting at the second column (and first character of "s").
+    for (uint32_t si = 1; si <= sLen; si++) {
+      // Get the character from "s" that corresponds to this column,
+      // compare it to the t-character, and compute the "cost".
+      const char16_t sch = s[si - 1];
+      int cost = (sch == tch) ? 0 : 1;
+
+      // ............ We want to calculate the value of cell "d" from
+      // ...ab....... the previously calculated (or initialized) cells
+      // ...cd....... "a", "b", and "c", where d = min(a', b', c').
+      // ............
+      int aPrime = prevRow[si - 1] + cost;
+      int bPrime = prevRow[si] + 1;
+      int cPrime = currRow[si - 1] + 1;
+      currRow[si] = std::min(aPrime, std::min(bPrime, cPrime));
+    }
+
+    // Advance to the next row.  The current row becomes the previous
+    // row and we recycle the old previous row as the new current row.
+    // We don't need to re-initialize the new current row since we will
+    // rewrite all of its cells anyway.
+    int* oldPrevRow = prevRow;
+    prevRow = currRow;
+    currRow = oldPrevRow;
+  }
+
+  // The final result is the value of the last cell in the last row.
+  // Note that that's now in the "previous" row, since we just swapped them.
+  *_result = prevRow[sLen];
+  return SQLITE_OK;
+}
+
+// This struct is used only by registerFunctions below, but ISO C++98 forbids
+// instantiating a template dependent on a locally-defined type.  Boo-urns!
+struct Functions {
+  const char* zName;
+  int nArg;
+  int enc;
+  void* pContext;
+  void (*xFunc)(::sqlite3_context*, int, sqlite3_value**);
+};
+
+}  // namespace
+
+////////////////////////////////////////////////////////////////////////////////
+//// Exposed Functions
+
+int registerFunctions(sqlite3* aDB) {
+  Functions functions[] = {
+      {"lower", 1, SQLITE_UTF16, 0, caseFunction},
+      {"lower", 1, SQLITE_UTF8, 0, caseFunction},
+      {"upper", 1, SQLITE_UTF16, (void*)1, caseFunction},
+      {"upper", 1, SQLITE_UTF8, (void*)1, caseFunction},
+
+      {"like", 2, SQLITE_UTF16, 0, likeFunction},
+      {"like", 2, SQLITE_UTF8, 0, likeFunction},
+      {"like", 3, SQLITE_UTF16, 0, likeFunction},
+      {"like", 3, SQLITE_UTF8, 0, likeFunction},
+
+      {"levenshteinDistance", 2, SQLITE_UTF16, 0, levenshteinDistanceFunction},
+      {"levenshteinDistance", 2, SQLITE_UTF8, 0, levenshteinDistanceFunction},
+
+      {"utf16Length", 1, SQLITE_UTF16, 0, utf16LengthFunction},
+      {"utf16Length", 1, SQLITE_UTF8, 0, utf16LengthFunction},
+  };
+
+  int rv = SQLITE_OK;
+  for (size_t i = 0; SQLITE_OK == rv && i < ArrayLength(functions); ++i) {
+    struct Functions* p = &functions[i];
+    rv = ::sqlite3_create_function(aDB, p->zName, p->nArg, p->enc, p->pContext,
+                                   p->xFunc, nullptr, nullptr);
+  }
+
+  return rv;
+}
+
+////////////////////////////////////////////////////////////////////////////////
+//// SQL Functions
+
+void caseFunction(sqlite3_context* aCtx, int aArgc, sqlite3_value** aArgv) {
+  NS_ASSERTION(1 == aArgc, "Invalid number of arguments!");
+
+  const char16_t* value =
+      static_cast<const char16_t*>(::sqlite3_value_text16(aArgv[0]));
+  nsAutoString data(value,
+                    ::sqlite3_value_bytes16(aArgv[0]) / sizeof(char16_t));
+  bool toUpper = ::sqlite3_user_data(aCtx) ? true : false;
+
+  if (toUpper)
+    ::ToUpperCase(data);
+  else
+    ::ToLowerCase(data);
+
+  // Set the result.
+  ::sqlite3_result_text16(aCtx, data.get(), data.Length() * sizeof(char16_t),
+                          SQLITE_TRANSIENT);
+}
+
+/**
+ * This implements the like() SQL function.  This is used by the LIKE operator.
+ * The SQL statement 'A LIKE B' is implemented as 'like(B, A)', and if there is
+ * an escape character, say E, it is implemented as 'like(B, A, E)'.
+ */
+void likeFunction(sqlite3_context* aCtx, int aArgc, sqlite3_value** aArgv) {
+  NS_ASSERTION(2 == aArgc || 3 == aArgc, "Invalid number of arguments!");
+
+  if (::sqlite3_value_bytes(aArgv[0]) > SQLITE_MAX_LIKE_PATTERN_LENGTH) {
+    ::sqlite3_result_error(aCtx, "LIKE or GLOB pattern too complex",
+                           SQLITE_TOOBIG);
+    return;
+  }
+
+  if (!::sqlite3_value_text16(aArgv[0]) || !::sqlite3_value_text16(aArgv[1]))
+    return;
+
+  const char16_t* a =
+      static_cast<const char16_t*>(::sqlite3_value_text16(aArgv[1]));
+  int aLen = ::sqlite3_value_bytes16(aArgv[1]) / sizeof(char16_t);
+  nsDependentString A(a, aLen);
+
+  const char16_t* b =
+      static_cast<const char16_t*>(::sqlite3_value_text16(aArgv[0]));
+  int bLen = ::sqlite3_value_bytes16(aArgv[0]) / sizeof(char16_t);
+  nsDependentString B(b, bLen);
+  NS_ASSERTION(!B.IsEmpty(), "LIKE string must not be null!");
+
+  char16_t E = 0;
+  if (3 == aArgc)
+    E = static_cast<const char16_t*>(::sqlite3_value_text16(aArgv[2]))[0];
+
+  nsAString::const_iterator itrString, endString;
+  A.BeginReading(itrString);
+  A.EndReading(endString);
+  nsAString::const_iterator itrPattern, endPattern;
+  B.BeginReading(itrPattern);
+  B.EndReading(endPattern);
+  ::sqlite3_result_int(
+      aCtx, likeCompare(itrPattern, endPattern, itrString, endString, E));
+}
+
+void levenshteinDistanceFunction(sqlite3_context* aCtx, int aArgc,
+                                 sqlite3_value** aArgv) {
+  NS_ASSERTION(2 == aArgc, "Invalid number of arguments!");
+
+  // If either argument is a SQL NULL, then return SQL NULL.
+  if (::sqlite3_value_type(aArgv[0]) == SQLITE_NULL ||
+      ::sqlite3_value_type(aArgv[1]) == SQLITE_NULL) {
+    ::sqlite3_result_null(aCtx);
+    return;
+  }
+
+  const char16_t* a =
+      static_cast<const char16_t*>(::sqlite3_value_text16(aArgv[0]));
+  int aLen = ::sqlite3_value_bytes16(aArgv[0]) / sizeof(char16_t);
+
+  const char16_t* b =
+      static_cast<const char16_t*>(::sqlite3_value_text16(aArgv[1]));
+  int bLen = ::sqlite3_value_bytes16(aArgv[1]) / sizeof(char16_t);
+
+  // Compute the Levenshtein Distance, and return the result (or error).
+  int distance = -1;
+  const nsDependentString A(a, aLen);
+  const nsDependentString B(b, bLen);
+  int status = levenshteinDistance(A, B, &distance);
+  if (status == SQLITE_OK) {
+    ::sqlite3_result_int(aCtx, distance);
+  } else if (status == SQLITE_NOMEM) {
+    ::sqlite3_result_error_nomem(aCtx);
+  } else {
+    ::sqlite3_result_error(aCtx, "User function returned error code", -1);
+  }
+}
+
+void utf16LengthFunction(sqlite3_context* aCtx, int aArgc,
+                         sqlite3_value** aArgv) {
+  NS_ASSERTION(1 == aArgc, "Invalid number of arguments!");
+
+  int len = ::sqlite3_value_bytes16(aArgv[0]) / sizeof(char16_t);
+
+  // Set the result.
+  ::sqlite3_result_int(aCtx, len);
+}
+
+}  // namespace storage
+}  // namespace mozilla